Diffuse Reflectance Spectroscopy Research Articles

Plasma Engineering toward Improving the Microwave-Absorbing/Shielding Feature of a Biomass-Derived Material.

During the past decade, ever-increasing electromagnetic pollution has excited a global concern. A sustainable resource, facile experimental scenario, fascinating reflection loss (RL), and broad efficient bandwidth are the substantial factors that intrigue researchers. This research led to the achievement of a brilliant microwave-absorbing material by treating pampas as biomass. The carbon-based microfibers attained by biowaste were treated by plasma under diverse environments to amplify their microwave-absorbing features. Moreover, a pyrolysis scenario was performed to compare the results. The reductive processes were performed by H2 plasma and carbonization. However, the CO2 plasma was performed to regulate the heteroatoms and defects. Interestingly, polystyrene (PS) was applied as a microwave-absorbing matrix. The aromatic rings existing in the absorbing medium establish electrostatic interactions, elevating interfacial polarization, and physical characteristics of PS augment the practical applications of the final product. The manipulated biomasses were characterized by Raman, X-ray diffraction, energy-dispersive spectroscopy, field emission scanning electron microscopy, and diffuse reflection spectroscopy analyses. Eventually, the microwave-absorbing features were estimated by a vector network analyzer. The plasma-treated pampas under H2/Ar blended with PS gained a maximum RL of -90.65 dB at 8.79 GHz and an efficient bandwidth (RL ≤ -10 dB) of 4.24 GHz with a thickness of 3.20 mm; meanwhile, plasma treatment under CO2 led to a maximum RL of 97.99 dB at 14.92 GHz and an efficient bandwidth of 7.74 GHz with a 2.05 mm thickness. Particularly, the biomass plasmolyzed under Ar covered the entire X and Ku bands with a thickness of 2.10 mm. Notably, total shielding efficiencies of the treated bioinspired materials were up to ≈99%, desirable for practical applications.

Enhanced hydrogen storage performance of zinc and magnesium cobaltite nanocomposites

Renewable and sustainable energies are vital for the near future. Hydrogen, as a clean energy carrier, is a potential candidate for supplying energy in the foreseeable future. Nowadays, hydrogen storage technology has become a significant issue in the energy sector. In this study, ZnCo2O4/ZnO and MgCo2O4/MgO nanocomposites have been synthesized using the sol-gel method with stearic acid as a complexing agent. Different analyses were studied to examine the crystal structure, morphology, and physical properties of the as-prepared samples, including X-ray diffraction (XRD), Fourier transforms infrared (FT-IR), field emission scanning electron microscopy (FESEM), diffuse reflectance spectroscopy (DRS), and vibrating sample magnetometer (VSM). Various methods have been utilized for hydrogen storage technology. In a pioneering approach, the electrochemical hydrogen storage of samples was compared by the chronopotentiometry technique in KOH (4 M) electrolyte solution. The results reveal that ZnCo2O4/ZnO and MgCo2O4/MgO nanocomposites exhibit excellent discharge capacities of 4240 and 3529 mAh/g, respectively, after 11 cycles.

Evaluating hyperpigmentation: is invasion of the skin necessary?

BackgroundThe combination of long wavelength ultraviolet A1 radiation (LWUVA1) and visible light (VL) has been shown to produce photodamage and the majority of organic sunscreens lack protection against this spectrum. Currently, established testing protocols for VL photoprotection are lacking.ObjectiveTo compare pigmentation assessment methods, including Investigator’s Global Assessment (IGA) scoring, Diffuse Reflectance Spectroscopy (DRS), and immunohistochemistry, to assess the utility of each in evaluating VL + LWUVA1 induced pigmentation.MethodsAnonymized IGA, DRS, and immunohistochemistry data for 37 subjects (Fitzpatrick skin phototypes IV-VI) was retrospectively analyzed for pigment evaluation. Pigmentation was induced on the subjects’ backs with VL + LWUVA1 (0%–0.5% UVA1) irradiation at a dose of 480 J/cm2. Comparisons were made for all three assessment techniques between non-irradiated skin and VL + LWUVA1 irradiated skin, as well as between pure VL (0% UVA1) and VL + LWUVA1 (0.5% UVA1) irradiated sites. All comparisons were made for data collected approximately 24 h after irradiation to evaluate persistent pigment darkening (PPD).ResultsAmong all 37 subjects, both IGA scores and DRS detected a statistically significant difference in PPD between irradiated and non-irradiated sites, as well as between VL + LWUVA1 and pure VL irradiated sites. However, MART-1/Melan-A did not indicate a statistically significant difference in PPD between irradiated and non-irradiated sites or between VL + LWUVA1 and pure VL irradiated sites.ConclusionSubjective and objective noninvasive assessments were more sensitive in detecting VL + LWUVA1 induced pigmentation and should be preferred over invasive methods. Researchers are advised to initiate assessments with IGA and subsequently incorporate DRS for more objective and comprehensive insights in pigment evaluation.

Synthesis and erudite insight into the structural, luminescence and thermal sensing characteristics of Sm3+ incorporated [formula omitted]-BaB2O4 novel phosphors

In this paper, we have presented the comprehensive characterization of red-light-emitting novel β-BaB2O4:xSm3+ (x = 0.5, 0.75, 1, 1.5, and 2 mol%) phosphor samples synthesized by making use of solid-state reaction method. The XRD patterns verified the successful synthesis and in-depth analyses were carried out to explore the structural, luminescence, and thermal properties. Notably, the introduction of Sm3+ through doping did not result in any substantial alterations in the crystal structure. Photoluminescence (PL) emission spectra exhibited 4 distinct peaks for 401 nm excitation. Out of these 4 peaks, the prominent peak was present at 601 nm, attributed to the magnetic dipole-allowed transition 4G5/2 → 6H7/2. The colorimetric analysis revealed the correlated color temperature (CCT) to be around 1700 K, accompanied by 99.9 % colour purity. The optimal doping concentration, before luminescence quenching, was identified as 1 mol%, with multipole-multipole interactions identified as the predominant quenching mechanism. Diffuse reflectance spectroscopy (DRS) studies on β-BaB2O4:1%Sm3+ confirmed characteristic peaks corresponding to Sm3+ transitions, revealing an ionic bonding nature between Sm3+ and the host. Also, the direct optical band gap was determined to be 5.62 eV. Furthermore, the optimized phosphor demonstrated exceptional temperature-dependent photoluminescent (TDPL) properties, exhibiting a negligible (∼5 %) decrease in emission intensity for prominent peaks even at 440 K. Overall, the phosphors displayed high activation energy, significant thermal stability, and thermal sensing properties, making them promising candidates for various optoelectronic applications.

Sphere-shaped ZnO photocatalyst synthesis for enhanced degradation of the Quinolone antibiotic, Ofloxacin, under UV irradiation.

The sphere-shaped zinc oxide (ZnO) photocatalyst was synthesized by the homogeneous precipitation method, using Zn(CH3COO)2·2H2O as a zinc precursor and NH4OH as a precipitating agent. The morphology and crystal structure of the prepared ZnO sample were studied by XRD, SEM, FT-IR, XPS, zetapotential measurements, and a low-temperature nitrogen adsorption-desorption technique. The optical characteristics of ZnO were determined by UV - Vis diffuse reflectance spectroscopy. ZnO photocatalyst performance of up to 100% within 210min was observed in the photodegradation of the ofloxacin antibiotic under ultraviolet (UV) irradiation. The effect of antibiotic concentration, heavy metal ions, and water sources on the photocatalytic activity of ZnO demonstrated both the potential of its application under different conditions, and a good adaptability of this photocatalyst. The photodegradation reaction correlated well with the first-order kinetics model, with a rate constant of 0.0173min-1. The reusability of the photocatalyst was verified after three cycles of use. Admittedly, photogenerated electrons and holes played a key role in removal of the antibiotic. This work showed the suitability of prepared ZnO for antibiotic removal, and its potential use for environmental protection.

Correlations of light scattering properties in human skin with the person’s age assessed using a non-invasive technique

We analyze the influence of a person’s age on the thicknesses and reduced scattering coefficients of the epidermis and dermis in visible part of the spectrum. Their values were assessed using a non-invasive technique which combines pulsed photothermal radiometry and diffuse reflectance spectroscopy with Monte Carlo modeling of light transport in a four-layer model of skin. The analysis is affected by the strong influences of the melanin content on the reduced scattering coefficient of the epidermis, aepi, and blood content in the case of dermis (ader). Separating their contributions reveals a significant decrease of ader with the person’s age at an average rate of –0.25 mm–1 per decade, while the contribution of blood in the papillary dermis amounts to 1.0 mm–1%–1. Meanwhile, no influence of the person’s age was found on aepi and the thicknesses of the epidermis or dermis.

Outstanding photocatalytic activity of a mechano-thermally synthesized Z-scheme BiFeO3- Fe2O3 heterostructure

In this study, α-Bi2O3 and α-Fe2O3 powder mixtures experienced a novel mechano-thermal procedure, which includes high-energy ball milling followed by heat treatment, resulting in the successful synthesis of a BiFeO3-Fe2O3 nanocomposite. Simultaneous thermal analysis (STA) and X-ray diffraction (XRD) showed that the formation and characteristics of BiFeO3-Fe2O3 nanocomposite are greatly influenced by the milling process, heat-treatment temperature, and the α-Bi2O3:α-Fe2O3 molar ratio. X-ray photoelectron spectroscopy (XPS) spectra confirmed the presence of Bi, Fe, and O, indicating the formation of the BiFeO3 phase. Field emission scanning electron microscopy (FESEM) analysis showed the development of plate-like microstructures in the BiFeO3 phase with an average thickness of 88 nm. Diffuse reflectance spectroscopy (DRS) indicated that the 20 h-milled nanocomposite with a molar ratio of α-Bi2O3:α-Fe2O3 (1:3) exhibited the lowest band gap of 2.38 eV after heat treatment at 750 °C. The reduction in photoluminescence (PL) peaks and increase in photocurrent in the above sample suggested a decrease in charge carrier recombination rate, leading to high photocatalytic activity of 85 and 42% for methylene blue (MB) and methyl orange (MO) degradation, respectively. The effect of various pH levels on the photocatalytic activity of both dyes was examined, with MO degrading by 94% in an acidic environment after 300 min of visible light exposure, while MB experienced similar degradation in an alkaline setting. The kinetics and mechanism of photocatalytic degradation were extensively studied using the Langmuir-Hinshelwood (L-H) model, revealing the significant role of hydroxyl radicals in photodegradation. A Z-scheme mechanism for charge transfer in the nanocomposite was postulated, drawing upon radical scavenging and Mott-Schottky experiments. The prepared photocatalyst showed excellent stability and reusability following a cyclic experiment.

Effective degradation of tetracycline under visible light by microwave-assisted reflux synthesis of ZnO/MoS2/rGO ternary nanocomposites

ZnO@MoS2 and conducting rGO based ternary nanocomposites were synthesized by a bottom-up microwave-assisted reflux method and effectively investigated for the photocatalytic degradation of tetracycline hydrochloride (TCH) antibiotic. The XRD, EDAX and XPS results corroborates the formation of nanostructure composite with high phase purity. The ZnO nanorods are well grafted on the curled configuration of layered MoS2 and thin surfaced rGO sheets as visualised from HR-TEM analysis. Upon addition of rGO, there is a significant decrease in the bandgap and improved visible light response in the ternary nanocomposites is elucidated by UV–visible Diffuse Reflectance Spectroscopy (UV-DRS) analysis. The suppression in photo-induced electron/hole pair recombination and allowing easy charge transport of ZnMG-50 were evidenced from photoluminescence (PL) and photo-electrochemical impedance (photo-EIS) spectroscopy. From BET and BJH analysis, the enhancement in surface area and pore volume by loading of rGO (SBET = 264.794 m2/g and 0.548 cm3/g). The optimized ZnMG-50 nano-photocatalyst possess a superior photocatalytic performance with higher removal efficiency of 92.18 % was achieved at pH level 10, catalyst dosage 40 mg and TCH concentration 20 ppm within 180 min under illumination. The degradation process compiles a pseudo-first order reaction with a kinetic rate constant of 0.01365 min−1. The nonstop generation of hydroxyl (˙OH) and superoxide (O2˙-) reactive species were beneficial for free electrons in the active participation, which remains as a core factor in the degradation process. The detailed study on ZnMG-50 nanocomposite substantiated to be an efficient noble metal-free synthetic catalyst for enhanced photocatalytic degradation of antibiotics.

Catharanthus roseus-mediated CuAl2O4 nanocomposites for evaluation of killing kinetics

The present article portrayed on the killing kinetic of human pathogenic bacteria using bioinspired mesoporous CuAl2O4 nanocomposites (NCs). The NCs was fabricated using leaf extract of medicinal plant Catharanthus roseus (CR) as a green reducer and stabilizer. As bio-fabricated material was calcined at 800 °C and characterized by several analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Ultraviolet–Visible Diffuse Reflectance Spectroscopy (UV-DRS), Energy Dispersive X-Ray Spectroscopy (EDS), X-Ray Photoelectron Spectroscopy (XPS), Raman, Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM) to authenticate its structure, phase, chemical bonding, chemical state, size and morphology behaviors. XRD and TEM revealed a reduced crystallite and nanoscale sizes of biosynthesized NCs. Moreover, XRD study exposed a cubic-structure of material, while transmission electron microscopy rendered an average particles size in range 10–15 nm. However, BET profile advocates a mesoporous nature of the particles. An effective biological molecular docking modulation assessed by substituting natural inhibitor by bioinspired NCs, while the protein PDB ID 4Z8D FabH as a receptor site for the present investigation. After assessment of molecular docking examination, the antibacterial activity of bioinspired NCs were performed against Staphylococcus aureus, Bacillus subtillis, Klebsiella pneumoniae and Escherichia coli using agar-well method. The broth culture method was employed on different pathogenic strains by kinetic growth assays and colony forming unit.

Green synthesis and studies on citrus medica leaf extract-mediated Au–ZnO nanocomposites: A sustainable approach for efficient photocatalytic degradation of rhodamine B dye in aqueous media

Abstract Incorporating narrow band gap oxide semiconductors and metals into zinc oxide (ZnO) nanostructures broadens the range of light sensitivity to include visible wavelengths. In this study, the photocatalytic degradation of rhodamine B (RhB) dye was studied as a model for environmental pollution in aqueous media. This study describes the use of photodegradation catalysts, including gold (Au), ZnO, and Au–ZnO nanocomposites (prepared in ratios of 90:10 and 95:5) using the extract of Citrus medica leaves. X-ray diffraction (XRD) findings have shown that ZnO nanoparticles (NPs) have a hexagonal wurtzite structure. Field emission-scanning electron microscopy findings have depicted that ZnO NPs have diverse shapes, including spherical, quasi-spherical, hexagonal, and anisotropic, with some clumping. Au exhibits consistent spherical shapes and sizes with even distribution. Au–ZnO (90:10) shows quasi-spherical NPs with interconnected spherical Au, forming a porous and uneven surface. Au–ZnO (95:5) has spherical gold nanoparticles (Au NPs) dispersed on a textured ZnO surface, with some clustering and size variation as evident from the transmission electron microscopy, atomic force microscopy, and diffuse reflectance UV-visible spectroscopy analysis. The characterization results have demonstrated the uniform distribution of Au across the ZnO lattice. Additionally, the XRD patterns confirmed the hexagonal wurtzite structure of ZnO. Furthermore, energy-dispersive analysis of X-ray (EDX)-mapping verified the inclusion of zinc, oxygen, and Au in the hybrid Au–ZnO nanocomposites and their effective distribution. The topological analysis revealed a rough surface for the generated nanostructures. By comparing the results of various techniques, EDX analysis using atomic and weight ratios confirmed the presence of oxygen and Au in the nanocomposite. Additionally, the surface area analysis (BET) test has reported that the adsorption and desorption of nitrogen follow a Type III isotherm. The presence of an H3-type hysteresis loop further confirms the mesoporous nature of the composites, which reports the presence of wedge-shaped pores. The Au–ZnO (90:10) nanocomposite exhibits a higher surface roughness compared to other composites. In addition, this UV-visible diffuse reflectance spectroscopy has enumerated the band gaps of various nanomaterials using UV-visible spectroscopy. Moreover, the analysis has unveiled that combining ZnO with Au NPs (doping) improved the photocatalytic performance of ZnO. This improvement is attributed to the formation of additional energy levels within the ZnO band gap due to the presence of Au ions. Experimental investigation of the breakdown of RhB dye under visible light irradiation revealed superior photocatalytic activity for the Au–ZnO (90:10) nanocomposite compared to both Au–ZnO (95:5) and pure ZnO and Au counterparts. Multiple experiments confirmed the effective photodegradation and removal of RhB dye from the aqueous medium using the nanocatalyst under visible light irradiation. Under optimal conditions (1.0 g·L−1 photocatalyst, 10 ppm RhB, and pH 10), 99% photodegradation efficiency was reached within 50 min of irradiation. Investigation of reactive species revealed that the increased effectiveness of photodegradation in Au–ZnO (90:10) stems from the presence of photogenerated holes and hydroxyl radicals. The study also analyzed the reaction kinetics and order, and the reusability of the best photocatalyst Au–ZnO (90:10)) was confirmed through five consecutive cycles, demonstrating its sustained effectiveness in photodegradation. These findings highlight the potential of Au–ZnO (90:10) nanocomposite as a promising material for photocatalytic degradation of organic dyes.

Uranium Oxide Hydrate Frameworks with Dy(III) or Lu(III) Ions: Insights Into the Framework Structures With Lanthanide Ions.

Two uranium oxide hydrate frameworks (UOHFs) with either Dy3+ or Lu3+ ions, Dy1.36(H2O)6[(UO2)10UO13(OH)4] (UOHF-Dy) or Lu2(H2O)8[(UO2)10UO14(OH)3] (UOHF-Lu), were synthesized hydrothermally and characterized with a range of structural and spectroscopic techniques. Although SEM-EDS analysis confirmed the same atomic ratio of ~5.5 for U : Dy and U : Lu, they displayed different crystal morphologies, needles for UOHF-Dy in the orthorhombic C2221 space group and plates for UOHF-Lu in the triclinic P-1 space group. Both frameworks are composed of β-U3O8 type layers linked by pentagonal bipyramidal uranium polyhedra, with the Dy3+/Lu3+ ions inside the channels. However, the arrangements of Dy3+/Lu3+ ions are different, with disordered Dy3+ ions well aligned at the centers of the channels and single Lu3+ ions well-separated in a zigzag pattern in the channels. While the characteristic vibrational modes were revealed by Raman spectroscopy, the presence of a pentavalent uranium center in UOHF-Lu was confirmed with diffuse reflectance spectroscopy. The formation of two types of UOHFs with lanthanide ions, high or low symmetry, and the structure trend were discussed regards to synthesis conditions and lanthanide ionic radius. This work highlights the complex chemistry driving the formation of UOHFs with lanthanide ions and has implications to the spent nuclear fuel under geological disposal.

Hydrothermal preparation, crystal structure, Hirshfeld surface analysis, photophysical properties and antifungal activity of a series of complexes assembled by 5-bromo-2-(carboxymethoxy)benzoic acid ligands

Five complexes [Co(BCBA)(H2O)3]n (1), [Co(BCBA)(4,4′-Bipy)2·(H2O)]n (2), [Cu(BCBA)(H2O)]n (3), [Zn(BCBA)(H2O)]n (4) and [Cd(BCBA)(2,2′-Bipy)(H2O)·(H2O)]n (5) (H2BCBA= 5‑bromo-2-(carboxymethoxy)benzoic acid, 4,4′-Bipy = 4,4′-bipyridine and 2,2′-Bipy = 2,2′-bipyridine) have been synthesized with H2BCBA ligand by solvothermal condition. All the complexes have been structurally characterized by infrared spectra (IR), elemental analyses and single-crystal X-ray diffraction analyses. Complex 1 is a zero-dimensional structure, and complexes 2–5 are one-dimensional chain structure. Furthermore, thermogravimetric analyses (TGA), Hirshfeld surface analysis, photo-luminescence properties, Solid-state UV–Vis diffuse reflectance spectroscopy and antifungal activity for complexes 1–5 were investigated. The reciprocal H···O/H/Br/C contacts dominate over 86 % of total Hirshfeld surface. Complexes 1–5 have certain inhibitory effects on 8 pathogenic fungi. Among them, complex 5 has the strongest antibacterial activity against Rhizoctonia solani AG1, Sphaeropsis sapinea and Colletotrichum fructicola, and the inhibitory rate reached 100 %.

Remediation of methylene blue water solution with iodine doped TiO2 nanoparticles and their regeneration: For reuse and check phytotoxicity level of treated water

Titanium dioxide (TiO2) is an essential metal-oxide semiconductor with unique features, such as low cost, photostability, nontoxicity, and abundance used as a photocatalyst. However, TiO2's photocatalytic activity is limited because it exclusively absorbs incoming light in the ultraviolet (UV) range. In present work, Iodine-doped TiO2 (IDT) photocatalysts were prepared employing solution-combustion process in various mol % of iodine (I), i.e., Ti1-xIxO2 (x = 0.00–0.05). Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and UV–Vis Diffuse Reflectance spectroscopic (DRS) were used to characterise the synthesised IDT. DRS indicated that iodine doping increased the absorbance range while diminishing its bandgap energy. As the I doping concentration in TiO2 increased, there was a constant shift in absorbance towards the visible light area. The XRD demonstrated that the prepared photocatalysts were solely with the anatase phase of TiO2. The FTIR identified the functional groups in the prepared photocatalysts and numerous Ti–O lattice stretching and bending vibrational bands. Photocatalytic degradation of methylene blue (MB) dye was tested in a UV photochemical reactor. The 3 % IDT photocatalyst has the highest photodegradation efficiency amid all the prepared pristine and IDT photocatalysts. Regarding dye photodegradation, the synthesised TiO2 photocatalyst doped with 3 % Iodine outperformed the commercially available Aeroxide P-25 photocatalyst. Furthermore, the nanoparticles demonstrated excellent reusability in regeneration trials. A study on the germination of "Vigna Radiata" was done to determine phytotoxicity as part of the investigation into the potential use of photocatalytically treated water in irrigation. The phytotoxicity evaluation results show that the treated water has potential for use in irrigation.

Photogeneration of Hydrogen: Insights from a Pt(II)‐Complex Incorporated into a Covalent Organic Framework

AbstractPt(II)‐based molecular catalysts stand as a prototypical system in hydrogen evolution reactions (HER) owing to their consistently elevated activity levels. Their integration into heterogeneous systems thus provides an ideal platform to develop catalytic materials with optimal atom economy. In this work, by rational molecular design, we have synthesized a novel two‐dimensional photoactive Covalent Organic Framework (COF), wherein the pore walls host a quinoline‐based α‐diimine ligand serving as a coordination site for anchoring a Pt(II) molecular catalyst. Thorough structural analyses, employing X‐ray photoelectron spectroscopy (XPS), infrared spectroscopy (FT‐IR), diffuse reflectance spectroscopy (DR), coupled with DFT calculations, distinctly confirm the Pt(II) complexation through the coordination site of the α‐diimine ligand. The Pt(II)‐metalated COF exhibits photocatalytic activity with a hydrogen evolution rate reaching up to 1300 μmol g−1 h−1. Nevertheless, the occurrence of platinum nanoparticles in post‐catalysis samples, along with reduced photocatalytic activity in the presence of chloride ions, suggests that Pt(II) anchored into the COF backbone might not be the primary catalytic site.

Utilizing banana peel in conjunction with TiO2 photocatalyst for the efficient decolorization of malachite green

Porous materials are frequently integrated into TiO2 photocatalysts due to their enhanced surface area and reaction efficiency. This study aimed to enhance the efficiency of wastewater treatment by developing a TiO2 combined with banana peel (BP) through the sol-gel method. The TiO2/BP composite was extensively analyzed using a range of methods, such as X-ray diffraction (XRD), field emission transmission electron microscopy (FESEM), energy dispersive X-ray (EDX) analysis, diffuse reflectance spectroscopy (DRS UV–vis), photoluminescence spectra (PL), and Brunauer–Emmett–Teller (BET) analysis. Subsequent evaluation of the photoactivity of the TiO2/BP composite compared to bare TiO2 particles revealed a noteworthy enhancement in decolorizing malachite green (MG) dye under visible light. Furthermore, recyclability testing further demonstrated consistent performance for up to four cycles, highlighting the potential application of this porous material-based photocatalytic composite in wastewater treatment.

Integration of high-entropy nanozyme and hollow In2S3 nanotube heterostructures decorated with WO3 for ultrasensitive PEC aptasensing of highly toxic mycotoxin

As a highly toxic mycotoxin, patulin threatens human and animal health. Herein, a new signal amplification strategy was designed for photoelectrochemical (PEC) analysis of patulin based on nanotube-like In2S3/WO3 heterostructures with the assistance of PtRuFeCoW high-entropy alloy nanorods (HEANRs). Specifically, the prominent photoactivity of the In2S3/WO3 was investigated by UV−vis diffuse reflectance and photoluminescence spectroscopy, coupled by elaborating the photoelectron transport mechanism in detail. Simultaneously, the excellent peroxidase-like activity of the PtRuFeCoW HEANRs was certificated mainly by UV–vis absorption spectroscopy. On such foundation, the PtRuFeCoW HEANRs modified capture DNA was cast onto the In2S3/WO3 based photoanode for catalyzing 4-chloro-1-naphthol (4-CN) oxidation to form insoluble benz-4-chloro-hexadienone (4-CD) precipitate in the presence of H2O2, ultimately weakening the PEC currents. The resulting PEC sensor exhibited a wider detection range from 0.1 pg mL−1 to 500 ng mL−1 and a lower detection limit was down to 0.063 pg mL−1 (S/N = 3). The HEANRs nanozyme assisted PEC method holds great promise for ultrasensitive detection of environmental pollutants in practice.

Para-Nitrophenol detection by an electrochemical approach based on two-dimensional binary metal oxides ZrO2-Nd2O3 nanorod fabricated with PEDOT:PSS onto glassy carbon electrode

In this approach, a wet chemical method was employed to synthesize the nanorods (NRs) of Zirconium oxide − Neodymium Oxide (ZrO2-Nd2O3) in an aqueous solution. Comprehensive characterizations encompassing ultraviolet/visible diffuse reflectance spectroscopy (UV/vis DRS), Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), alongside field emission scanning electron microscopy (FESEM) equipped with X-ray energy-dispersive spectroscopy (EDS), were applied for optical, elemental, morphological, and structural analyses of resultant material. To fabricate a highly selective and ultra-sensitive electrochemical sensor for para-Nitrophenol (para-NP) in the presence of other interfering toxic chemicals, a glassy carbon electrode (GCE) was modified with a thin layer of ZrO2-Nd2O3NRs. Poly 3,4-ethylenedioxythiophene polystyrene sulfonate (PEDOT:PSS) served as an adhesive conducting binder in this modification process. Subsequently, we introduced a novel electrochemical approach for the first time for the detection of para-NP by making use of newly developed ZrO2-Nd2O3-NRs/PEDOT:PSS/GCE as selective para-NP electrochemical sensor in an aqueous medium. This innovative electrochemical approach exhibited remarkable electrochemical responses, featuring high sensitivity and long-term stability when applied to para-NP detection. The calibration curve demonstrated linearity across broad linear dynamic range (LDR) spanning para-NP concentrations from 0.1 pM to 0.1 mM. Key analytical parameters, including limit of detection (LOD) at signal-to-noise ratio (SNR) of 3, limit of quantification (LOQ), and sensitivity, were determined to be 0.0141 pM, 0.047 pM, and 0.67 μAμM-1cm−2, respectively, based also on the gradient of calibration plot. This sensor holds significant promise for real sample analysis aimed at preserving the natural environment. So, this study introduces a novel and well-structured approach to the development of a highly sensitive para-NP sensor utilizing ZrO2-Nd2O3-NRs/PEDOT:PSS/GCE, employing a reliable electrochemical approach.

Optical and morphological studies of Titania nanotubes by varying anodization parameters

In this study, the self-organized Titania (TiO2) was created by anodizing pure titanium in a mixture of ethylene glycol, ammonium fluoride, and distilled water using an electrochemical cell. This study aims to examine how changes in anodization parameters impact the morphology and optical properties of Titania. The nanotubes achieved 10 μm length by applying less ammonium fluoride (NH4F) electrolytes. The energy dispersive X-ray spectroscopy (EDX) reveals that the prepared samples are essentially composed of TiO2. Mixed phases of rutile and anatase are obtained by increasing the annealing temperature from 360 to 480 ℃ and crystalline size seems to be reduced by increasing anodization potential, calculated by X-ray diffraction analysis (XRD), diffuse reflectance spectroscopy (DRS) helps to identify the bandgap value and the minimum value attained at 2.56 eV without doping and the electron-hole recombination rates calculated through the intensity of photoluminescence (PL) analysis. Ultimately, the optimal values of the anodization parameters for the generation of the most effective sample are determined.

The Synthesis of Ag/TiO2 via the DC Magnetron Sputtering Method and Its Application in the Photocatalytic Degradation of Methyl Orange in Na2SO4 Solution

TiO2 and TiO2 films modified with Ag (Ag/TiO2) were prepared via the DC magnetron sputtering method and the degree of modification was controlled via the sputtering power and time of Ag. The microstructures and properties of these films were characterized using field emission scanning electron microscopy, X-ray diffractometry, ultraviolet–visible diffuse reflectance spectrometry, atomic force microscopy, and X-ray photoelectron spectroscopy (XPS). The results show that the prepared films have an anatase structure. Compared with pure TiO2, Ag deposition can improve the utilization of light. The three-dimensional images of Ag/TiO2 clearly show that with the increase in Ag sputtering power and sputtering time, Ag particles on the surface of the film gradually increase, and the structure of the film is relatively dense. The photocatalytic effect of Ag/TiO2 films is the best when the Ag sputtering power is 5 W and the sputtering time is 50 s. Under high-pressure mercury lamp irradiation, the photocatalytic degradation rate of methyl orange (MO) in pure MO solution with Ag/TiO2-5 W-50 s can reach 100% within 55 min, whereas that in MO-Na2SO4 mixed solution can reach 99.55% within 65 min. The results suggest that the presence of Na2SO4 in MO solution can inhibit the degradation of MO using Ag/TiO2, the result of XPS suggests that Na2SO4 accelerates the oxidation of Ag, which may lead to an increase in the recombination rate of photogenerated electron–hole pairs and a decrease in the degradation rate. During the process of recycling photocatalysts, the degradation rate of MO was apparently reduced. A possible reason is that the Ag particles have been oxidized and products of photocatalytic degradation are on the surface of the photocatalyst. The photocatalytic degradation mechanism was studied.

Activity, stability, and kinetic study of CuO/TiO2 Janus photocatalyst for rhodamine B degradation

ABSTRACT The CuO/TiO2 photocatalyst was synthesized using hydrothermal and sonochemical methods and subsequently applied to degrade rhodamine B in wastewater. The best synthesis conditions were established, determining Cu(NO3)2 solution concentration of 2.5 wt.% and calcination temperature of 500 °C. The CuO/TiO2 photocatalyst underwent characterization through various techniques, including inductively coupled plasma spectroscopy (ICP), photoluminescence, X-ray diffraction, ASAP, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), transmission electron microscopy (TEM), and diffuse reflectance spectroscopy. TEM and SEM analyses revealed the presence of TiO2 nanowires and CuO nanoparticles. The Box–Behnken design, encompassing 27 experimental runs, assessed the impact of process variables such as initial dye concentration, pH, UV lamp power, and catalyst dose on the degradation process. The model's R2 value of 0.9893 indicated a high precision in fitting the predicted data to their actual values. Analysis of variance results highlighted UV irradiation power as the most significant variable within the design space. In addition, the CuO/TiO2 photocatalyst demonstrated efficacy under visible light irradiation. Light-expanded clay aggregate beads were chosen as the substrate for photocatalyst immobilization, which enhanced the reaction rate. The stability of CuO/TiO2 was evidenced by about 2% reduction in efficiency after four degradation cycles.