Enhancement Of Diffraction Efficiency Research Articles

Three-layer polarisation volume grating with enhanced diffraction efficiency and FOV in AR and VR applications

ABSTRACT In the rapidly evolving fields of Augmented Reality (AR) and Virtual Reality (VR), achieving high diffraction efficiency and a wide field of view (FOV) is critical for enhancing visual experience. This paper presents a three-layer Polarisation Volume Grating (TL-PVG) structure designed to address the limitations of single-layer PVGs in AR/VR applications. By stacking multiple PVG layers with different tilt angles, TL-PVG achieves an expanded angular bandwidth and improved diffraction efficiency, enabling brighter and more immersive displays. The proposed TL-PVG structure incorporates polarisation multiplexing to optimise the optical diffraction efficiency by approximately 75%, thereby enhancing image brightness and sharpness. The experimental results demonstrate that TL-PVG significantly outperforms traditional single-layer PVGs, offering a promising solution for waveguide elements in next-generation AR/VR displays. This study provides a comprehensive analysis of the fabrication process, optical properties, and applications of TL-PVGs, highlighting their potential to revolutionise the AR/VR technology.

Selective amplification effect on the diffraction efficiency of a phase grating generated by femtosecond laser pulses.

A phase grating that selectively amplifies diffraction orders that are multiples of a determined integer is designed. For the proposed grating, multiples of the fourth order are enhanced. These results are supported by experiments. The structure is inscribed in the volume of a lithium niobate crystal by employing the femtosecond laser pulse micro-machining technique. A model based on the Raman-Nath behavior of the grating predicts a diffraction efficiency enhancement for those selected orders. Moreover, it is observed that by changing the incidence angle allows transferring energy from multiples of fourth orders to multiples of three. These findings have potential applications in optical spectroscopy and optical communications as well as for photonic devices in which a controlled energy exchange between orders is necessary. The basic wave nature of the mentioned effect allows finding a counterpart in different wavelength ranges of the electromagnetic spectrum.

Li K Emission Spectra Obtained using a New Diffraction Grating with Enhanced Diffraction Efficiency and Widen Energy Range

Li K Emission Spectra Obtained using a New Diffraction Grating with Enhanced Diffraction Efficiency and Widen Energy Range

Enhancement of acousto-optic diffraction efficiency in SiO2 crystals due to ellipticity of optical eigenwaves: isotropic acousto-optic interaction

Enhancement of acousto-optic diffraction efficiency in SiO2 crystals due to ellipticity of optical eigenwaves: isotropic acousto-optic interaction

Optical Enhancement of Diffraction Efficiency of Texas Instruments Phase Light Modulator for Beam Steering in Near Infrared.

Phase light modulator (PLM) by MEMS mirror array operating in a piston-mode motion enables a high-speed diffractive beam steering in a random-access and flexible manner that makes a lidar system more intelligent and adaptive. Diffraction efficiency is determined by the range of the piston motion of the MEMS array; consequently, a larger range of the piston motion is required for beam steering in infrared, such as for lidar. We demonstrated how the range of the piston motion is optically enhanced by a factor of two with a light-recycling optics based on Talbot self-imaging. The proposed optical architecture extends the usable range of the wavelength so that a MEMS-PLM designed for visible wavelength is applicable for a high-efficiency beam steering at an infrared wavelength of 1550 nm with an improved diffraction efficiency of 30%.

Design of Semiconductor Contact Grating Terahertz Source with Enhanced Diffraction Efficiency

We report a semiconductor contact grating terahertz source design based on a rectangular profile for phase-matched terahertz generation in the long infrared pump wavelength range. The calculations show that the best diffraction efficiency can be achieved by a filling factor significantly smaller than 50%. Furthermore, the possibility of diffraction efficiency enhancement was investigated by applying three different antireflective coating structures. Numerical simulations have indicated that at 2.06 μm and 3.0 μm pump wavelength, diffraction efficiencies greater than 91% and 89% can be achieved by adding an appropriate antireflective coating to the GaP and GaAs contact grating structure, respectively. In addition, numerical simulations were performed to investigate the influence of wall angles on diffraction efficiency. The results reveal that the wall angle does not significantly affect the diffraction efficiency: while keeping the wall angle deviation from the vertical below 25 degrees, the efficiency drop remains below 5% for otherwise optimal grating parameters.

Enhanced diffraction efficiency with angular selectivity by inserting an optical interlayer into a diffractive waveguide for augmented reality displays.

The overall efficiency and image uniformity are important criteria for augmented reality display. The conventional in-coupling grating design intending to improve only the first-order diffraction efficiency without considering the multiple interactions with diffracted light in the waveguide is insufficient. In this work, the back-coupling loss (BCL) on the in-coupling surface relief grating, and the power of light arriving at the out-coupling grating over that of incident light (denoted as optical efficiency in waveguide, OEW) are introduced for the design of in-coupling grating. A simple and effective method to increase diffraction efficiency with unique angular selectivity is demonstrated by inserting an interlayer between the waveguide and grating. The optimized average OEW and its uniformity under a field of view of 40° are increased from 8.02% and 24.83% to 8.34% and 35.02% by introducing a region-selective MgF2 interlayer.

Enhancement of Diffraction Efficiency Based on the Addition Principle of Coded Digital Gratings

For the traditional subwavelength gratings, we can code different units to construct the coded metagratings. In this paper, we propose an innovative principle of adding coded gratings, which can be used to add or subtract two or more traditional coded metagratings sequences and obtain a new coded metagratings sequence. Based on the proposed addition principle, the coded metagratings can adjust the scattering angle flexibly. This method overcomes the limitation that traditional grating can only obtain discrete diffraction angle. Importantly, compared with traditional gratings, the coded metagrating sequences with addition operation have enhanced diffraction efficiency at the same diffraction angle. This phenomenon may be attributed to the enhanced interaction between the coding particles of the new disordered coding sequence metagratings constructed. Our proposed coded grating addition principle provides a new degree of freedom for the flexible modulation of the terahertz wavefront. At the same time, this method can be extended to optical band or microwave band, which opens a new path for electromagnetic wave modulation and beam scanning.

Design and experimental evaluation of enhanced diffraction efficiency of lanthanum-based material coated laminar-type gratings in the boron K-emission region.

Numerical and experimental studies have been performed to evaluate the enhancement of diffraction efficiency of diffraction gratings around B $K$-emission by overcoating lanthanum series layers on conventional metal-coated laminar-type gratings. We propose an optical design method based on the concept of spectral flux given by collection efficiency and diffraction efficiency. A diffraction grating with a small angle of incidence provides an advantage to soft x-ray spectrographs because it collects the emission at a larger solid angle compared to that of conventional grazing incidence diffraction gratings. Numerical calculations indicated that La and ${\rm{La}}{{\rm{F}}_3}$ were promising as overcoating materials on a laminar-type Ni-coated diffraction grating, and we performed an experimental study using ${\rm{La}}{{\rm{F}}_3}$ and La/C overcoatings, considering their producibility and durability. The diffraction efficiencies were measured using a reflectometer at a synchrotron facility. The diffraction efficiencies observed at 183.4 eV were 29.4% and 34.3% at angles of incidence of 85.1° and 84.9° for ${\rm{Ni}}/{\rm{La}}{{\rm{F}}_3}$ and Ni/La/C gratings, respectively.

Diffraction efficiency enhancement and optimization in full-color HOE using the inhibition characteristics of the photopolymer.

A novel and effective simultaneous recording method, to the best of our knowledge, is proposed for improving the diffraction efficiency and uniformity of full-color holographic optical elements (HOE) using the Bayfol HX102 photopolymer. To improve the diffraction efficiency of a full-color HOE, it is important to find the optimal recording beam intensity taking into account the initial and late responses of the medium. The range of optimal beam intensity for recording full-color HOE can be found experimentally by analyzing the inhibition period and response characteristics of the recording medium for three wavelengths. Through this method, a full-color HOE with an average diffraction efficiency of about 56.81% and a standard deviation of about 1.7% was implemented in a single layer photopolymer.

任意偏振光保偏的声光衍射效率增强系统的研究

任意偏振光保偏的声光衍射效率增强系统的研究

High-speed line-scan confocal Raman microscope with enhanced diffraction efficiency

Confocal Raman microscopy is commonly employed across different research fields because it allows for label-free sample investigation at high spatial resolution. However, the slow data acquisition speed of Raman microscopy limits its application for imaging large area samples. We developed a line-scan confocal Raman microscope to achieve parallel detection for high-speed data acquisition and proposed a dual mirror scan method to enhance the diffraction efficiency of the spectrometer. We used a Powell lens for the line illumination and demonstrated that it can provide a more uniform intensity distribution than a cylindrical lens. The spectrometer consists of a volume phase holographic grating and two scanning mirrors. Using the proposed dual mirror scan method can provide a high-resolution Raman spectrum at high efficiency over a wide spectral range. The system has a maximum spectral rate of 25 600 spectra s−1 and a theoretical spectral resolution of 1.2 cm−1. With the parallel detection by the line illumination and the enhanced diffraction efficiency, we expect the proposed system can be used in a variety of applications that require a high spectral rate, such as wide-field Raman imaging.

Generalized Space-Time-Periodic Diffraction Gratings: Theory and Applications

This paper studies the theory and applications of the diffraction of electromagnetic waves by space-time periodic (STP) diffraction gratings. We show that, in contrast with conventional spatially periodic grating, a STP diffraction grating produces spatial diffraction orders, each of which is formed by an infinite set of temporal diffraction orders. Such spatiotemporally periodic gratings are endowed with enhanced functionalities and exotic characteristics, such as asymmetric diffraction pattern, nonreciprocal and asymmetric transmission and reflection, and an enhanced diffraction efficiency. The theory of the wave diffraction by STP gratings is formulated through satisfying the conservation of both momentum and energy, and rigorous Floquet mode analysis. Furthermore, the theoretical analysis of the structure is supported by time and frequency domain FDTD numerical simulations for both transmissive and reflective STP diffraction gratings. Additionally, we provide the conditions for Bragg and Raman-Nath diffraction regimes for STP gratings. Finally, as a particular example of a practical application of the STP diffraction gratings to communication systems, we propose an original multiple access communication system featuring full-duplex operation. STP diffraction gratings are expected to find exotic practical applications in communication systems, especially for the realization of enhanced-efficiency or full-duplex beam coders, nonreciprocal beam splitters, nonreciprocal and enhanced-resolution holograms, and illusion cloaks.

Enhanced diffraction efficiency of two-dimensional phase gratings.

Phase gratings are used as beam multiplexers in the submillimeter and Terahertz spectral range. Two-dimensional beam arrangements can often be obtained most easily by the superposition of two one-dimensional grating structures. We show that in general this approach does not yield the maximum grating efficiency and propose a method to obtain significantly higher efficiencies for this grating class.

Hybrid-level Fresnel zone plate for diffraction efficiency enhancement

The Fresnel Zone Plate (FZP) is widely used in a variety of applications. However, the most concerning drawback of the FZP is its low diffraction efficiency limited by fabrication capability. The diffraction efficiency of an FZP with a surface-relief profile can reach 100% at a specified diffracted order, however, this is difficult to engineer in a precise manner. In this paper, a hybrid-level FZP (HLFZP) is proposed to maximize the diffraction efficiency under a certain lithography condition. To theoretically verify this enhancement, the diffracted field of the HLFZP is derived by establishing a diffraction model. According to different machining capabilities, the design criteria for the level number distribution on the HLFZP are presented. Simulated results show significant improvement in imaging quality while comparing the diffraction efficiency of the specifically designed 8-4-2 HLFZP to that of the traditional 2-level FZP. Fabrication processes for the 8-4-2 HLFZP are developed, with experimental results indicating that the diffraction efficiency could be improved by 54% using the proposed HLFZP, compared to the traditional 2-level FZP. The root mean square (RMS) of the wavefront error for the 8-4-2 HLFZP is 1/20λ (λ = 632.8 nm), and imaging results are good as the predicted results. It is concluded that the proposed hybrid-level method is also promising for improving the diffraction efficiency of other diffractive optical elements.

Enhanced diffraction efficiency of polarization holographic gratings in Au nanoparticles-doped methyl orange film

The polarization holographic gratings recorded in Au nanoparticles-doped methyl orange/polyvinylpyrrolidone (MO/PVP) composite films were investigated. The polarization state of diffraction beams was controlled by a probe light and holographic gratings together. The first-order diffraction efficiency of the MO/PVP film doped with Au nanoparticles was measured to be 3.2 times larger than that of pure composite film. Meanwhile, an obvious enhancement of photoinduced birefringence of MO molecules was also demonstrated. This enhancement of diffraction efficiency and photoinduced birefringence was discussed in terms of the localized field effect via the surface plasmon resonance of Au nanoparticles, which was confirmed by finite-difference time-domain simulation.

Enhanced diffraction efficiency of mixed volume gratings with nanorod dopants in polymeric nanocomposite

We propose a method to improve the holographic performance of a volume holographic material by the particle-shape dependence of doped nanoparticles. Previously reported methods are based on changing the doping concentration of dopants and the diameter of nanoparticles or modifying the surface of nanoparticles. When transverse surface plasmon resonance of optimized gold nanorods shifts near the recording wavelength, experiments confirmed that enhancement of diffraction efficiency by efficient dopants of gold nanorods is better than that of gold nanospheres. The enhancement effects under optimal mixing conditions occur with a crucial factor of maximum absorption intensity at the recording wavelength using the particle-shape dependence of doping nanorods. The gold nanorods with an average diameter of 10 ± 2.1 nm and an average length of 34 ± 5 nm are doped in Phenanthrenequinone-doped poly(methyl methacrylate) photopolymers. The diffraction efficiency of volume holographic grating in the photopolymer doped with nanorods is 18.5% higher than that in the photopolymer doped with nanospheres and 29.6% higher than that in the pure photopolymer.

Underwater giant enhancement of broadband diffraction efficiency of surface diffraction gratings fabricated by femtosecond laser

In this study, a simple approach is proposed to improve the diffraction efficiency of surface diffraction gratings on fused silica fabricated by femtosecond laser. Effects of grating period, pulse energy, scanning speed and wavelength on the total diffraction efficiency are also investigated. In addition, the mechanism of the diffraction efficiency's giant enhancement is discussed by finite difference time domain (FDTD) and optical phase shift structure calculation. It is revealed that: (1) Compared with the diffraction efficiency obtained in air, the underwater image via diffraction grating is clearer than that in air and diffraction pattern in water is much brighter; (2) The diffraction efficiency increases with an increase in wavelength and scanning speed, whereas it decreases while the laser pulse energy is high; and (3) This giant enhancement is attributed to the degree of Mie scattering and refraction, which is effectively reduced for the existence of water.

Photoinitiation and Inhibition under Monochromatic Green Light for Storage of Colored 3D Images in Holographic Polymer-Dispersed Liquid Crystals.

Holographic photopolymer composites have garnered a great deal of interest in recent decades, not only because of their advantageous light sensitivity but also due to their attractive capabilities of realizing high capacity three-dimensional (3D) data storage that is long-term stable within two-dimensional (2D) thin films. For achieving high performance holographic photopolymer composites, it is of critical importance to implement precisely spatiotemporal control over the photopolymerization kinetics and gelation during holographic recording. Though a monochromatic blue light photoinitibitor has been demonstrated to be useful for improving the holographic performance, it is impractical to be employed for constructing holograms under green light due to the severe restriction of the First Law of Photochemistry, while holography under green light is highly desirable considering the relatively low cost of laser source and high tolerance to ambient vibration for image reconstruction. Herein, we disclose the concurrent photoinitiation and inhibition functions of the rose bengal (RB)/N-phenylglycine (NPG) system upon green light illumination, which result in significant enhancement of the diffraction efficiency of holographic polymer-dispersed liquid crystal (HPDLC) gratings from zero up to 87.6 ± 1.3%, with an augmentation of the RB concentration from 0.06 × 10-3 to 9.41 × 10-3 mol L-1. Interestingly, no detectable variation of the ϕ1/2kp/kt1/2, which reflects the initiation efficiency and kinetic constants, is given when increasing the RB concentration. The radical inhibition by RBH• is believed to account for the greatly improved phase separation and enhanced diffraction efficiency, through shortening the weight-average polymer chain length and subsequently delaying the photopolymerization gelation. The reconstructed colored 3D images that are easily identifiable to the naked eye under white light demonstrate great potential to be applied for advanced anticounterfeiting.

Enhanced diffraction properties of photoinduced gratings in nematic liquid crystals doped with Disperse Red 1.

Diffraction properties of photoinduced gratings recorded by overlapping two coherent beams at 532 nm in nematic liquid crystals doped with Disperse Red 1 were investigated with a probe beam at 632.8 nm. The grating was formed due to the alignment of dye molecules that leaded to the reorientation of the liquid crystal phase. The diffraction efficiency of the photoinduced grating was found to increase rapidly when the sample temperature was close to the clearing point in the nematic phase and a nearly 30-fold enhancement of the first-order diffraction efficiency was obtained. The pretransitional enhancement of the diffraction efficiency was discussed in terms of the reorientation of liquid crystals, optical nonlinearity effects and the onset of critical opalescence near the nematic-isotropic phase transition. Moreover, a peak shift of diffraction efficiency towards the lower temperature was observed with the increase of recording light intensity, which was attributed to laser induced photochemical disordering.