Difference In Fracture Load Research Articles

Effect of pulp-chamber lateral wall thickness and number on fracture resistance in endocrown-restored molars: An in vitro study

Background/purposeIt remains unclear how the thickness and number of pulp-chamber lateral walls (PCLWs) affects fracture resistance in endocrown-restored teeth. Materials and methods64 mandibular molars were collected and randomly divided into eight groups (n = 8). In group C (control group), the teeth were untreated. In groups T1, T2, and T3, the teeth were subjected to endodontic treatment and restored with nanoceramic endocrowns exhibiting different PCLW thicknesses (T1: 0.5 mm, T2: 1.0 mm, and T3: 1.5 mm). In groups N1, N2, N3, and N4, the numbers of missing PCLWs in prepared teeth were one (N1), two (N2), three (N3), and four (N4). All restored teeth were subjected to axial loading until fracture using a universal testing machine. The mean fracture loads were recorded and compared by one-way analysis of variance; the fractured samples were observed under a stereo microscope. ResultsThe results showed no statistically significant differences in fracture load among groups T1, T2, and T3 (P > 0.05). Although the fracture loads gradually decreased as the number of missing PCLWs increased, there were no statistically significant differences in fracture load among groups C, N1, N2, and N3, and N4 (P > 0.05). ConclusionBoth thickness and remaining number of PCLW does not affect fracture resistance in endodontically treated molars restored with nanoceramic endocrowns.

Comparing and Evaluating the Effect of Different Thickness of Two Metal-Free Restoration on Fracture Resistance in Molar Implant Prosthesis

Aim: The objectives of this article was to determine the minimum thickness of two monolithic materials for a posterior implant prosthesis. Materials and methods sixty monolithic IPS E.MAX CAD and zirconia crowns with different occlusa l thicknesses were made with the use of a computer-aided design/computer-aided manufacturing technique was divided into 3 experimental groups: group (1) 0.5 mm group (2) 0.7mm group (3)1mm. A universal testing machine was used to determine the fracture load value. The restoration was loaded until fracture; the fracture resistance was registered. Two-way ANOVA has been used to examine the data., followed by the least significant difference LSD test. One-way ANOVA variance analysis was used to examine the differences in fracture load of monolithic zirconia or IPS E.MAX CAD at various thicknesses (p=0.05). Results vertical load test revealed that the fracture resistance of monolithic zirconia higher than the lithium disilicate crown (E.MAX CAD). The results showed that the highest mean value of fracture load test was obtained in the ice zirconia translucent with 1mm thickness group (1880N), while the lowest mean value was in the E.MAX CAD with thickness 0.5mm Group (223N). Conclusions: The fracture resistance of CAD-CAM monolithic crowns is influenced by the occlusal thickness. zirconia prosthesis with occlusal thickness 0.7mm,1mm had a high fracture resistance when compared with E.MAX CAD.

Fracture resistance and fracture modes in endodontically treated maxillary premolars restored using different CAD-CAM onlays.

To examine the fracture resistance and fracture modes of endodontically treated teeth (ETT) restored using onlays of different materials fabricated using computer-aided design and computer-aided manufacturing (CAD-CAM). Sixty maxillary first premolars were randomly assigned to six groups (n=10). The first group comprised intact teeth (INT). The remaining premolars were prepared for mesio-occluso-distal cavity and root canal treatments. Group 2 was treated using polymer-reinforced zinc oxide-eugenol intermediate restorative material (IRM). Groups 3-6 were core build-up, prepared for onlay, and restored using resin nanoceramic (Cerasmart [CER]), polymer-infiltrated ceramic networks (Vita Enamic [VE]), lithium disilicate-based ceramic (IPS e.max CAD [EM]), or translucent zirconia (Katana Zirconia UTML [KZ]). All specimens were immersed in 37 °C distilled water for 24 h. Each specimen was loaded at 45° to the long axis until failure (crosshead speed, 0.5 mm/min). Fracture loads were analyzed using one-way analysis of variance and Tukey's post-hoc test (α=0.05). There were no significant differences in fracture load among the INT, CER, VE, and EM groups. The fracture load in the KZ group was significantly higher than those in the other groups (P < 0.05). Fracture load was the lowest in the IRM group (P < 0.05). The unrestorable failure rate was 70% in the KZ group and 10-30% in the other experimental groups. ETT restored using Cerasmart, Vita Enamic, or IPS e.max CAD onlays had fracture resistance and patterns comparable to those of intact teeth. Katana Zirconia UTML-restored ETT had the highest fracture load but also a higher unrestorable failure rate.

Impact of Polymerization Technique and ZrO2 Nanoparticle Addition on the Fracture Load of Interim Implant-Supported Fixed Cantilevered Prostheses in Comparison to CAD/CAM Material.

ZrO2 nanoparticles (ZNPs) have excellent physical properties. This study investigated the fracture load of implant-supported, fixed cantilevered prosthesis materials, reinforced with ZNPs and various polymerization techniques, compared with conventional and CAD/CAM materials. Sixty specimens were made from two CAD/CAM; milled (MIL) (Ceramill TEMP); and 3D-printed (NextDent Denture 3D+). Conventional heat-polymerized acrylic resin was used to fabricate the other specimens, which were grouped according to their polymerization technique: conventionally (HP) and autoclave-polymerized (AP); conventionally cured and reinforced with 5 wt% ZNPs (HPZNP); and autoclave reinforced with 5 wt% ZNPs (APZNP). The specimens were thermocycled (5000 cycles/30 s dwell time). Each specimen was subjected to static vertical loading (1 mm/min) using a universal Instron testing machine until fracture. Scanning electron microscopy was used for fracture surface analyses. The ANOVA showed significant fracture load differences between all the tested groups (p = 0.001). The Tukey post hoc tests indicated a significant difference in fracture load between all tested groups (p ˂ 0.001) except HP vs. HPZNP and AP vs. MIL. APZNP had the lowest mean fracture load value (380.7 ± 52.8 N), while MIL had the highest (926.6 ± 82.8 N). The CAD/CAM materials exhibited the highest fracture load values, indicating that they could be used in long-term interim prostheses. Autoclave polymerization improved fracture load performance, whereas ZrO2 nanoparticles decreased the fracture load performance of cantilevered prostheses.

Fracture Resistance and Fracture Behaviour of Monolithic Multi-Layered Translucent Zirconia Fixed Dental Prostheses with Different Placing Strategies of Connector: An in vitro Study

PurposeTo evaluate the effect of different placing strategies performed in the connector area on fracture resistance and fracture behaviour of monolithic multi-layered translucent zirconia fixed dental prostheses (FDPs).Materials and MethodsThirty 3-unit monolithic FDPs were produced and divided into three groups (n = 10) based on the different strategies for placing the connector area of FDPs in multi-layered zirconia blank with varying contents of yttria ranging from 4 to 5 mol%. The groups were as follows: FDPs with connectors placed in dentin layer with 4 mol% yttria content, FDPs with connectors placed in gradient layer, and FDPs with connectors placed in translucent layer with 5 mol% yttria content. A final group (n = 10) of conventional monolithic zirconia with a monolayer of yttria content (4 mol%) has been used as a control group. The specimens were artificially aged using thermocycling and pre-loading procedures and subsequently loaded to fracture using a universal testing machine. Fracture loads and fracture behaviour were analyzed using one-way ANOVA and Fisher’s exact tests and statistically evaluated (p ≤ 0.05).ResultsThere were no significant differences in fracture loads among the groups based on the placing strategies of the connector area of the FDPs in the multi-layered translucent zirconia blank (p > 0.05). There was no significant difference in fracture loads between monolithic multi-layered translucent zirconia and conventional monolithic translucent zirconia materials (p > 0.05). Fracture behaviour of FDPs with connector area placed in translucent layer differed significantly compared to FDPs with connector area placed in dentin layer and FDPs in control group (p = 0.004).ConclusionThe placing strategies of the connector used in the computer aided design and manufacturing procedures do not considerably affect fracture resistance of monolithic FDPs made of multi-layered translucent zirconia. Monolithic FDPs made of multi-layered translucent zirconia show comparable strength to FDPs made of conventional translucent zirconia, but with different fracture behaviour.

Fracture strength of zirconia and lithium disilicate restorations following endodontic access.

To compare the fracture load of zirconia and lithium disilicate crowns prepared with endodontic access with fine and coarse diamond instruments. 0.8 mm (3Y zirconia) or 1 mm (lithium disilicate) crowns were luted to resin composite dies with resin-modified glass ionomer (zirconia) or self-adhesive resin (lithium disilicate) cement. A 2.5 mm endodontic access hole was placed in each crown with fine (8369DF.31.025FOOTBALL) or coarse (6379 DC.31.023FOOTBALL) diamond instruments and restored with composite. A control group was prepared without access holes. Crowns were thermocycled for 10,000 cycles (5-55°C) and tested in compression with a steel indenter until failure (n=8/group). A one-way ANOVA and Dunnett 2-sided test (alpha=0.05) compared differences in fracture load between groups. For zirconia, there was no statistical difference between the control group (2335 ± 160 N) and coarse diamond group (2345 ± 246 N); however, the fine diamond group (2077 ± 216 N) was significantly lower. For lithium disilicate, there was no statistical difference between the control group (2113 ± 183 N) and the fine (2049 ± 105 N) or coarse (2240 ± 118 N) groups. 3Y zirconia crowns became weaker when accessed with a fine diamond instrument. There was no negative effect of the endodontic access with bonded lithium disilicate crowns. Conservative endodontic access openings in high-strength ceramic restorations do not have a negative effect on their static fracture load. The coarse zirconia-cutting diamond rotary instrument is more efficient and has a less detrimental effect on the strength of the crowns than a fine diamond rotary instrument.

Biomechanics of a cemented short stem: a comparative in vitro study regarding primary stability and maximum fracture load

PurposeIn total hip arthroplasty, uncemented short stems have been used more and more frequently in recent years. Especially for short and curved femoral implants, bone-preserving and soft tissue-sparing properties are postulated. However, indication is limited to sufficient bone quality. At present, there are no curved short stems available which are based on cemented fixation.MethodsIn this in vitro study, primary stability and maximum fracture load of a newly developed cemented short-stem implant was evaluated in comparison to an already well-established cemented conventional straight stem using six pairs of human cadaver femurs with minor bone quality. Primary stability, including reversible micromotion and irreversible migration, was assessed in a dynamic material-testing machine. Furthermore, a subsequent load-to-failure test revealed the periprosthetic fracture characteristics.ResultsReversible and irreversible micromotions showed no statistical difference between the two investigated stems. All short stems fractured under maximum load according to Vancouver type B3, whereas 4 out of 6 conventional stems suffered a periprosthetic fracture according to Vancouver type C. Mean fracture load of the short stems was 3062 N versus 3160 N for the conventional stems (p = 0.84).ConclusionPrimary stability of the cemented short stem was not negatively influenced compared to the cemented conventional stem and no significant difference in fracture load was observed. However, a clear difference in the fracture pattern has been identified.

The three-point bending test of fiber-reinforced composite root canal posts.

The primary reason for using a post is to retain the core with the objective to restore the missing coronal tooth structure. To achieve optimum results, the materials that are used to restore endodontically treated teeth should have physical and mechanical properties that are similar to that of dentin. To characterize the strength parameters of fiber-reinforced composite (FRC) posts with the application of a three-point test. The mean fracture load, flexural strength and flexural modulus were taken into consideration. For the three-point strength tests, 5 kinds of fiberglass root-posts were used: GC Fiber Post (GC America, Alsip, USA), Mirafit White (Hager Werken, Duisburg, Germany), Innopost (InnoTech, Verona, Italy), Rebilda Post (Voco, Cuxhaven, Germany), and EverStick Post (GC Europe, Leuven, Belgium). For each system, 15 FRC posts were tested. All posts had the same diameter, length and shape. The three-point test was carried out in accordance with ISO 10477:2004, using the Instron-5944 testing machine (Instron, Norwood, USA). The test was carried out until the sample was broken. The highest force values (67.6 N) were recorded for the GC posts, and the lowest force required to break the sample (29.6 N) was noted for the EverStick Posts. In the case of bending strength, the highest values were also recorded for GC posts (912.4 MPa). Low bending strengths were obtained for the Mirafit White posts (537.2 MPa); however, the EverStick Posts were the weakest (436.2 MPa). Rebilda posts showed the highest modulus of elasticity - 31.1 GPa. The lowest values of the elastic modulus were registered for EverStick Posts - 12.5 GPa. There were statistically significant differences in fracture loads, flexural strengths and flexural modulus of the FRC-post systems tested. Individually polymerized FRC material showed lower flexural properties than compared prefabricated FRC posts.

Fracture Load of Veneered Telescopic Secondary Crowns Made of High-Performance Polymer on Zirconia Primary Crowns: Impact of Veneering Technique.

To analyze the impact of different veneering techniques on the fracture load of telescopic secondary crowns made of a high-performance polymer (Ultaire aryl ketone polymer [UAKP]). Zirconia primary crown models (taper of 0 degrees) were prepared (N = 48), polished, scanned, and divided into four veneering groups (n = 12 each): premanufactured, digital, full anatomical, and vestibular. For all groups except vestibular, a standardized telescopic secondary crown (thickness: 0.6 mm, circular margin: 1 mm) was constructed, adapted to the corresponding primary crown, milled from UAKP, and veneered. The veneered master crown was developed based on the premanufactured group. After surface polishing, all specimens were artificially aged in a chewing simulator (1.2 million cycles, 50 N, 1.1 Hz, between 5°C and 55°C). Fracture load was tested in a universal testing machine with a piston (Ø = 6 mm, 1 mm/minute). Fracture patterns were analyzed. For statistical analysis, Kolmogorov-Smirnov test and descriptive statistics followed by one-way ANOVA with post hoc Scheffé test were conducted (P < .05). Significant differences in fracture load were found between different veneering techniques (P < .001), with the highest values for the vestibular and digital groups, followed by the premanufactured group. Full anatomical veneering showed the significantly lowest fracture load (1,885 ± 397 N). For all specimens, cohesive brittle fractures with similar fracture patterns occurred, irrespective of the veneering technique. The veneering technique of telescopic secondary crowns made of high-performance polymer affects overall stability. All veneering techniques provided sufficient fracture load values for telescopic secondary crowns made of UAKP. Digital veneers seem the most recommendable.

Comparison study of bone strength of the proximal femur with and without hip osteoarthritis by computed tomography-based finite element analysis

Proximal femoral fractures are common in elderly osteoporosis patients; however, its prevalence is clinically rare in hip fracture patients with hip osteoarthritis (OA). This study aimed to evaluate bone strength of the proximal femur with or without hip OA and proximal femoral fracture risk using computed tomography (CT)-based finite element analysis (FEA). A retrospective analysis was done on CT data of 20 patients who underwent total hip arthroplasty for unilateral hip OA. Furthermore, the fracture load between OA and contralateral sides was compared and the association between fracture load and risk factor was analyzed. The fracture load was significantly higher in the OA side than that in the contralateral side (3819.5 ± 1557.8 N vs. 3224.5 ± 943.7 N, respectively; P = 0.0405). There was no significant difference in fracture load between OA and the contralateral side in Kellgren–Lawrence (KL)-3 and KL-4 grade, but the KL-4 fracture load tends to be high (P = 0.2461 and P = 0.0527, respectively). Moreover, there was no significant association between fracture load and OA severity or age. The study findings may assist in predicting bone strength and proximal femur fracture risk. The results of this FEA study indicate the bone strength of the proximal femur was affected by the severity of the osteoarthritis.

Measurement of Fracture Strength of Zirconia Dental Implant Abutments with Internal and External Connections Using Acoustic Emission.

The aim of the study was to investigate the fracture behaviour of four different groups of zirconia abutments with internal and external connections: (A) Astra Tech ZirDesign™ abutment on Astra Tech Implants, (B) Procera® Esthetic abutment on Nobel Biocare MK III Groovy Implants, (C) IPS e.max® on Straumann Implants, and (D) ZiReal® Posts on Biomet 3I implants. The load was applied on the assemblies using a Zwick universal testing machine: the initial and final failure loads and amplitude were recorded using acoustic emission technique. Mean initial and final failure force was found to be significantly different in each group (P < 0.001). IPS e.max® Straumann abutments exhibited the highest resistance to final fracture force compared to other abutment types. Acoustic emission can be used as one of the methods to detect fracture behaviour of implant abutments. There were no significant differences in fracture loads between the internal and externally connected zirconia abutments studied. However, externally connected abutments demonstrated screw loosening and some deformations.

Effect of Surface Treatment and Cement on Fracture Load of Traditional Zirconia (3Y), Translucent Zirconia (5Y), and Lithium Disilicate Crowns.

To determine if surface treatment and cement selection for traditional 3 mol% yttria partially stabilized zirconia (3Y-PSZ), "translucent" 5 mol% yttria-stabilized zirconia (5Y-Z), or lithium disilicate crowns affected their fracture load. Crowns with 0.8 mm uniform thickness (96, n = 8/group) were milled of 3Y-PSZ (Lava Plus), 5Y-Z (Lava Esthetic), or lithium disilicate (e.max CAD) and sintered/crystallized. Half the crowns were either particle-abraded with 30 µm alumina (zirconias) or etched with 5% hydrofluoric acid (lithium disilicate), and the other half received no surface treatment. Half the crowns from each group were luted with resin-modified glass ionomer (RMGI, RelyX Luting Plus) and half were luted with a resin cement (RelyX Unicem 2) to resin composite dies. Crowns were load cycled (100,000 cycles, 100 N force, 24°C water) and then loaded with a steel indenter until failure. A three-way ANOVA examined the effects of material, cement, and surface treatment on fracture load. Post-hoc comparisons were performed with the Tukey-Krammer method. Fracture load was signficiantly different for materials and cements (p<0.0001) but not surface treatments (p = 0.77). All lithium disilicate crowns luted with RMGI failed in fatigue loading cycling; 3Y-PSZ and 5Y-Z crowns luted with resin showed a higher fracture load compared with RMGI (p<0.001). With resin cement, there was no signficant difference in fracture load between 5Y-Z and lithium disiliciate (p = 1) whereas 3Y-PSZ had a higher fracture load (p < 0.0001). Cement type affected fracture load of crowns but surface treatment did not. The 0.8 mm uniform thick crowns tested benefited from using resin cement regardless of type of ceramic material. Crowns fabricated from 5Y-Z may be particle-abraded if luted with resin cement.

Mechanical behavior of metastatic femurs through patient-specific computational models accounting for bone-metastasis interaction

This paper proposes a computational model based on a finite-element formulation for describing the mechanical behavior of femurs affected by metastatic lesions. A novel geometric/constitutive description is introduced by modelling healthy bone and metastases via a linearly poroelastic constitutive approach. A Gaussian-shaped graded transition of material properties between healthy and metastatic tissues is prescribed, in order to account for the bone-metastasis interaction. Loading-induced failure processes are simulated by implementing a progressive damage procedure, formulated via a quasi-static displacement-driven incremental approach, and considering both a stress- and a strain-based failure criterion. By addressing a real clinical case, left and right patient-specific femur models are geometrically reconstructed via an ad-hoc imaging procedure and embedding multiple distributions of metastatic lesions along femurs. Significant differences in fracture loads, fracture mechanisms, and damage patterns, are highlighted by comparing the proposed constitutive description with a purely elastic formulation, where the metastasis is treated as a pseudo-healthy tissue or as a void region. Proposed constitutive description allows to capture stress/strain localization mechanisms within the metastatic tissue, revealing the model capability in describing possible strain-induced mechano-biological stimuli driving onset and evolution of the lesion. The proposed approach opens towards the definition of effective computational strategies for supporting clinical decision and treatments regarding metastatic femurs, contributing also to overcome some limitations of actual standards and procedures.

Biomechanical effects of osteoplasty with or without Kirschner wire augmentation on long bone diaphyses undergoing bending stress: implications for percutaneous imaging-guided consolidation in cancer patients

BackgroundOsteoplasty has been discouraged in long bones. However, despite a substantial lack of pre-clinical biomechanical tests, multiple clinical studies have implemented a wide range of techniques to optimise long bone osteoplasty. The aim of the present study is to evaluate the biomechanical properties of osteoplasty alone and in combination with Kirschner wires (K-wires) in a cadaveric human diaphyseal model undergoing 3-point bending stress.MethodsThirty unpaired human cadaveric hemi-tibia specimens were randomly assigned to receive no consolidation (group 1, n = 10), osteoplasty alone (group 2, n = 10), or K-wires augmented osteoplasty (group 3, n = 10). Specimens were tested on a dedicated servo-hydraulic machine using a 3-point bending test. Fracture load was calculated for each specimen; two-sample Wilcoxon rank-sum tests were used to assess differences between groups.ResultsMedian volume of polymethyl methacrylate injected was 18 mL for group 2 (25th–50th percentile 15–21 mL) and 19 mL for group 3 (25th–50th percentile 17–21). There were no significant differences in fracture load between groups 1 and 2 (z = − 0.793; p = 0.430), between groups 1 and 3 (z = − 0.944; p = 0.347), and between groups 2 and 3 (z = − 0.454; p = 0.650). Fractures through the cement occurred in 4 of 30 cases (13.3%); there were no K-wires fractures.ConclusionsOsteoplasty with or without K-wires augmentation does not improve the resistance of diaphyseal bone to bending stresses.

An in vitro evaluation of fracture load of implant‐supported zirconia‐based prostheses fabricated with different veneer materials

The purpose of this in vitro study was to evaluate fracture loads of implant-supported zirconia-based prostheses fabricated with different veneer materials (resin-based material and lithium disilicate ceramics). Forty-four zirconia-based molar prostheses were fabricated on dental implants and divided into four groups (n=11): zirconia-based prostheses veneered with feldspathic porcelain (ZVF), zirconia-based prostheses bonded with the lithium disilicate glass-ceramic veneer (ZBD), zirconia-based prostheses veneered with indirect composite resin (ZVC), and zirconia-based prostheses bonded with composite materials fabricated from a CAD/CAM resin block (ZBC). The zirconia-based prostheses and abutments were adhesively bonded with a dual-polymerized resin-based luting material. Fracture load was determined using compression load to the prostheses with a universal testing machine. The data were analyzed with one-way analysis of variance (ANOVA) and Tukey's HSD test (α=.05). The mean fracture load was significantly higher in the ZBC group (3.95 kN) than in the ZVC group (3.28 kN). No significant difference in fracture load was found among the ZVF (3.52 kN), ZBD (3.48 kN), and ZVC groups. The adhesively bonded veneering technique enhances fracture resistance of implant-supported zirconia-based prostheses fabricated with a resin-based material. All implant-supported zirconia-based restorations tested should resist physiologic masticatory forces in the oral environment.

Effect of ferrule on the fracture resistance of mandibular premolars with prefabricated posts and cores.

PURPOSEThis study evaluated fracture resistance with regard to ferrule lengths and post reinforcement on endodontically treated mandibular premolars incorporating a prefabricated post and resin core.MATERIALS AND METHODSOne hundred extracted mandibular premolars were randomly divided into 5 groups (n=20): intact teeth (NR); endodontically treated teeth (ETT) without post (NP); ETT restored with a prefabricated post with ferrule lengths of either 0 mm (F0), 1 mm (F1), or 2 mm (F2). Prepared teeth were restored with metal crowns. A thermal cycling test was performed for 1,000 cycles. Loading was applied at an angle of 135 degrees to the axis of the tooth using a universal testing machine with a crosshead speed of 2.54 mm/min. Fracture loads were analyzed by one-way ANOVA and Tukey HSD test using a statistical program (α=.05).RESULTSThere were statistical differences in fracture loads among groups (P<.001). The fracture load of F2 (237.7 ± 83.4) was significantly higher than those of NP (155.6 ± 74.3 N), F0 (98.8 ± 43.3 N), and F1 (152.8 ± 78.5 N) (P=.011, P<.001, and P=.008, respectively).CONCLUSIONFracture resistance of ETT depends on the length of the ferrule, as shown by the significantly increased fracture resistance in the 2 mm ferrule group (F2) compared to the groups with shorter ferrule lengths (F0, F1) and without post (NP).

Fracture resistance of implant-supported screw-retained zirconia-based molar restorations.

The objective of this invitro study was to investigate fracture loads of screw-retained zirconia-based molar restorations (hybrid abutment crown) fabricated with different restorative materials and designs. Forty-four screw-retained zirconia-based molar restorations were fabricated on dental implants and divided into four groups (n=11): porcelain-layered zirconia-based restorations (PLZ), indirect composite-layered zirconia-based restorations (ILZ), metal-ceramic restorations (MC), and monolithic zirconia restorations (MONO). The zirconia-based restorations in the PLZ, ILZ, and MONO groups were adhesively bonded on implant abutments with a dual-polymerized resin material. All restorations were tightened on implant bodies with titanium screws and were tested for fracture resistance. The Kruskal-Wallis test and Steel-Dwass test were used to evaluate differences in fracture loads (α=0.05). As compared with the other groups, the MONO specimens had a significantly higher mean fracture resistance (7.54 kN); no significant differences were found among the PLZ (1.96 kN), ILZ (1.80 kN), and MC (1.45 kN) groups (P>0.05). For the PLZ, ILZ, and MC groups, all specimens fractured within the layering materials. In contrast, the fracture mode for the MONO group was complete fracture of the restorations. All restorations withstood the masticatory forces. Fracture loads were significantly higher for screw-retained implant-supported monolithic zirconia restorations than for screw-retained bilayered restorations. For the screw-retained bilayered zirconia-based restorations, the fracture resistance of ILZ restorations was comparable to that of PLZ restorations and MC restorations.

Marginal adaptation, fracture load and macroscopic failure mode of adhesively luted PMMA-based CAD/CAM inlays

ObjectivesTo evaluate marginal adaptation, fracture load and failure types of CAD/CAM polymeric inlays. MethodsStandardized prepared human molars (48) were divided into four groups (n=12): (A) PCG (positive control group); adhesively luted glass–ceramic inlays, (B) TRX; CAD/CAM polymeric inlays luted using a self-adhesive resin cement, (C) TAC; CAD/CAM polymeric inlays luted using a conventional resin cement, and (D) NCG (negative control group); direct-filled resin-based composite restorations. All specimens were subjected to a chewing simulator. Before and after chewing fatigue, marginal adaptation was assessed at two interfaces: (1) between dental hard tissues and luting cement and (2) between luting cement and restoration. Thereafter, the specimens were loaded and the fracture loads, as well as the failure types, were determined. The data were analysed using three- and one-way ANOVA with post hoc Scheffé test, two sample Student's t-test (p<0.05). ResultsBefore and after chewing fatigue, marginal adaptation for interface 1 showed significantly better results for TRX and PCG than for TAC (p=0.001–0.02) and NCG (p=0.001–0.047). For interface 2, marginal adaptation for TAC was significantly inferior to TRX (p<0.001) and PCG (p<0.001). Chewing fatigue had a negative impact on the marginal adaptation of TAC and NCG. No significant differences in fracture load were found between all tested groups. SignificanceSelf-adhesive luted polymeric CAD/CAM inlays showed similar marginal adaptation and fracture load values compared to adhesively luted glass–ceramic inlays.

Fracture resistance of endodontically restored, weakened incisors

To test the fracture strength of weakened bovine incisors endodontically treated with mineral trioxide aggregate (MTA), calcium phosphate bone cement (CPBC) or fibre reinforced composite (FRC) posts, and to evaluate the fracture mode. Weakened bovine incisors (n = 75), standardized according to the dentinal wall thickness at the cervical area, were randomly assigned to one control group and three experimental groups. Unfilled teeth were assigned to group 1 (n = 20) and served as control group. Group 2 (n = 17) consisted of teeth filled with MTA. In group 3 (n = 18), the incisors were filled with CPBC and in group 4 (n = 20) with FRC posts. All specimens were subjected to load at a cross-head speed of 60 mm min(-1) until fracture occurred. The initial (IL) and final fracture (FL) loads (N) were recorded, and the failure mode among the different groups was evaluated. anova showed a statistically significant difference in fracture load among the groups. Tukey's test revealed a significant difference for the IL between the control group and the experimental groups with exception of the MTA group. The FL was not significantly different among the experimental groups. A high percentage of favourable fractures was seen in the FRC and CPBC groups. FRC posts and CPBC could be promising materials to strengthen non-vital structurally compromised teeth.

Effect of Framework Design on Fracture Resistance in Zirconia 4-unit All-ceramic Fixed Partial Dentures

The purpose of this study was to conduct static load-bearing tests on 4-unit Y-TZP all-ceramic fixed partial denture (FPD) frameworks with different cross-sectional areas and forms to evaluate the influence of connector design on fracture load. Each of the central, mesial and distal connectors was prepared with one of 2 different cross-sectional areas and one of 3 different forms (one circular and two oval forms) to give a total of 18 designs. Five frameworks were then prepared for each design, making a total of 90. Each framework was cemented to the test model with glass ionomer cement. Fracture load was measured with a universal testing machine at a cross-head speed of 1.0 mm/min. A three-way ANOVA revealed significant differences in fracture load depending on cross-sectional area, central connector cross-sectional form, or mesial/distal connector cross-sectional form (p<0.01). No interaction was observed, however, between any two connector design elements. The results of a Tukey analysis revealed a significant difference between the two connector cross-sectional areas investigated, with an increase in connector cross-sectional area resulting in an increase in fracture load. Fracture load decreased as the height of the mesial or distal connector decreased. Fracture load was significantly higher in frameworks in which the height of the central connector was greater than that of the distal or mesial connector. In conclusion, these results suggest that sufficient height needs to be maintained in the mesial/distal connector to secure a high fracture load in zirconia 4-unit all-ceramic FPDs. Moreover, even when this is not possible, a high fracture load may still be obtained by making the height of the central connector as great as possible. Furthermore, extending the connector cross-sectional area is effective in increasing fracture load.