Diels-Alder Chemistry Research Articles

Effect of Rubber Polarity on Cluster Formation in Rubbers Cross-Linked with Diels-Alder Chemistry.

Diels–Alder chemistry has been used for the thermoreversible cross-linking of furan-functionalized ethylene/propylene (EPM) and ethylene/vinyl acetate (EVM) rubbers. Both furan-functionalized elastomers were successfully cross-linked with bismaleimide to yield products with a similar cross-link density. NMR relaxometry and SAXS measurements both show that the apolar EPM-g-furan precursor contains phase-separated polar clusters and that cross-linking with polar bismaleimide occurs in these clusters. The heterogeneously cross-linked network of EPM-g-furan contrasts with the homogeneous network in the polar EVM-g-furan. The heterogeneous character of the cross-links in EPM-g-furan results in a relatively high Young’s modulus, whereas the more uniform cross-linking in EVM-g-furan results in a higher tensile strength and elongation at break.

Independently Tuning the Biochemical and Mechanical Properties of 3D Hyaluronan-Based Hydrogels with Oxime and Diels-Alder Chemistry to Culture Breast Cancer Spheroids.

For native breast cancer cell growth to be mimicked in vitro as spheroids, a well-defined matrix that mimics the tumor microenvironment is required. Finding a biomimetic material for 3D cell culture other than Matrigel has challenged the field. Because hyaluronan is naturally abundant in the tumor microenvironment and can be chemically modified, we synthesized a hyaluronan (HA) hydrogel with independently tunable mechanical and chemical properties for 3D culture of breast cancer cells. By modifying HA with distinct bioorthogonal functional groups, its mechanical properties are controlled by chemical cross-linking via oxime ligation, and its biochemical properties are controlled by grafting bioactive peptides via Diels-Alder chemistry. A series of hydrogels were screened in terms of stiffness and peptide composition for cancer spheroid formation. In the optimal hydrogel formulation, the 3D breast cancer spheroids showed decreased drug diffusion into their core and upregulation of cellular multidrug-resistant efflux pumps similar to what is observed in drug-resistant tumors. Our results highlight the potential of these tunable and well-defined gels in drug screening assays.

Telechelic Polybutadienes or Polyisoprenes Precursors for Recyclable Elastomeric Networks.

(Bis)furan-telechelic, low-molar-mass polybutadienes and polyisoprenes are synthesized by controlled degradation of high molar mass polymers and chain-end modifications yielding difunctional, trifunctional, or tetrafunctional polymers. Addition of a bismaleimide to the liquid-modified polymer leads to the formation of a thermoreversible elastomeric network based on the Diels-Alder chemistry for the trifunctional or tetrafunctional polymers, whereas only chain extension occurs for the bifunctional one. Dynamic mechanical analyses or tensile tests are performed on the networks and reveal a similar behavior for polyisoprene and polybutadiene with nevertheless quite different Young modulus or strain at break. The retro Diels-Alder reaction occurs upon heating, allowing the remolding of the used elastomer. The remolded network exhibits the same mechanical properties as the initial network, showing an efficient material recyclability.

Intracellular Imaging of Protein-Specific Glycosylation.

Posttranslational protein glycosylation is conserved in all kingdoms of life and implicated in the regulation of protein structure, function, and localization. The visualization of glycosylation states of designated proteins within living cells is of great importance for unraveling the biological roles of intracellular protein glycosylation. Our generally applicable approach is based on the incorporation of a glucosamine analog, Ac4GlcNCyoc, into the cellular glycome via metabolic engineering. Ac4GlcNCyoc can be labeled in a second step via inverse-electron-demand Diels-Alder chemistry with fluorophores inside living cells. Additionally, target proteins can be expressed as enhanced green fluorescent protein (EGFP)-fusion proteins. To assess the proximity of the donor EGFP and the glycan-anchored acceptor fluorophore, Förster resonance energy transfer (FRET) is employed and read out with high contrast by fluorescence lifetime imaging (FLIM) microscopy. In this chapter, we present a detailed description of methods required to perform protein-specific imaging of glycosylation inside living cells. These include the complete synthesis of Ac4GlcNCyoc, immunoprecipitation of EGFP-fusion proteins to examine the Ac4GlcNCyoc modification state, and a complete section on basics, performance, as well as data analysis for FLIM-FRET microscopy. We also provide useful notes necessary for reproducibility and point out strengths and limitations of the approach.

Controlled Antibody Release from Degradable Thermoresponsive Hydrogels Cross-Linked by Diels-Alder Chemistry.

Amine-modified four- and eight-armed poloxamines were prepared and subsequently functionalized with maleimide or furyl groups. Aqueous solutions of these polymers exhibited an immediate gelation at a temperature above 37 °C. Concomitantly, Diels-Alder reactions gradually cross-linked and cured the gels. Different ratios between four- and eight-armed macromonomers were used to tune hydrogel stability and mechanical properties. In this way, hydrogel stability could be precisely controlled in the range of 14 to 329 days. Controlled release of the model antibody bevacizumab was achieved over a period of 7, 21, and 115 days. Release profiles were triphasic with a low burst; approximately 87% of the released antibody was intact and displayed functional binding. The hydrogels presented in this study are degradable, nontoxic, rapidly gelling, stable, and provide controlled antibody release. They can be tailored to match the demands of various applications and present an attractive platform for antibody delivery.

Practical application of thermoreversibly Cross-linked rubber products

Currently, rubber products cannot simply be reprocessed after their product life, due to the irreversible cross-linking methods traditionally applied. The purpose of this work is to investigate how thermoreversible cross-linking of rubbers via Diels Alder chemistry can be used for the development of recyclable rubber products. Unfortunately, the applicability of the thermoreversible EPM-g-furan/BM system appears to be limited to room temperature applications, because of the rapid deterioration of the compression set at elevated temperatures compared to irreversibly cross-linked EPM. However, the use of EPM rubber modified with thiophene or cyclopentadiene moieties may extend the temperature application range and results in rubber products with acceptable properties. Finally, rubber products generally comprise fillers such as silica, carbon black or fibers. In this context, the reinforcing effect of short cut aramid fibers on the material properties of the newly developed thermoreversibly cross-linked EPM rubbers was also studied. The material properties of the resulting products were found to be comparable to those of a fiber reinforced, peroxide cured reference sample.

Multi-crosslinkable self-healing polysilsesquioxanes for the smart recovery of anti-scratch properties

A series of multi-crosslinkable, self-healing, ladder-structured polysilsesquioxane inorganic-organic hybrid materials were developed to enhance the mechanical properties through tandem UV-curing and Diels-Alder chemistry. The introduction of UV-curable acryl- or epoxy groups allowed for a higher degree of crosslink density while bringing the inorganic backbones closer together for highly efficient self-healing properties, all with a singular material as the ternary organic functional groups consisting of UV-curable function, diene, and dienophile were tethered to the well-defined inorganic backbone. Exceptional thermal stability (>400 °C), optical transparency (>95%), solution processability, as well as robust surface mechanical properties in both bulk (pencil hardness 6H) and nanoscale (elastic modulus > 9 GPa), properties which can be adroitly recovered through mild and rapid thermal treatment hold great promise for next generation hybrid smart coating materials for application in optoelectronic devices.

Dihydropyridazine-appended dibenzosuberenones as a new class of fluorophores: Application to fluoride sensing

Highly fluorescent, novel dihydropyridazine-appended dibenzosuberenone type dye molecules were obtained in a single step from simple compounds using Diels-Alder chemistry. This new fluorophore structure can be used for the construction of fluorescent chemosensors, as exemplified by selective and sensitive fluoride ion sensing. The –N–H protons in these structures are acidic enough to allow for fluoride-induced deprotonation, leading to a significant color change as well as a concomitant fluorescence quenching. These fluorophores possess large Stokes shifts, high quantum yields, and long fluorescence lifetimes; therefore, this study potentially paves the way for the construction of novel dye molecules for use in fluorescent dye applications.

Collision-induced activation: Towards industrially scalable approach to graphite nanoplatelets functionalization for superior polymer nanocomposites

Scale-up manufacturing of engineered graphene-like nanomaterials to deliver the industry needs for development of high-performance polymer nanocomposites still remains a challenge. Herein, we introduce a quick and cost-effective approach to scalable production of functionalized graphite nanoplatelets using “kitchen blender” approach and Diels-Alder chemistry. We have shown that, in a solvent-free process and through a cycloaddition mechanism, maleic anhydride can be grafted onto the edge-localized electron rich active sites of graphite nanoplatelets (GNP) resulting from high collision force, called “graphite collision-induced activation”. The mechanical impact was modelled by applying the point charge method using density functional theory (DFT). The functionalization of GNP with maleic anhydride (m-GNP) was characterized using various spectroscopy techniques. In the next step, we used a recyclable process to convert m-GNP to the highly-reactive GNP (f-GNP) which exhibits a strong affinity towards the epoxy polymer matrix. It was found that at a low content of f-GNP e.g., 0.5 wt%, significant enhancements of ~54% and ~65% in tensile and flexural strengths of epoxy nanocomposite can be achieved, respectively. It is believed that this new protocol for functionalization of graphene nanomaterials will pave the way for relatively simple industrial scale fabrication of high performance graphene based nanocomposites.

Kinetics of cross-linking and de-cross-linking of EPM rubber with thermoreversible Diels-Alder chemistry

The kinetics of the Diels-Alder (DA) cross-linking and retro-Diels-Alder (rDA) de-cross-linking reactions have been studied for furan-containing EPM rubber thermoversibly cross-linked with a bismaleimide. Cross-linking conversions obtained from spectroscopic methods deviate from rheological methods as the former take into consideration both the intermediate DA adduct and complete cross-links, while the latter only determine the formation and decomposition of complete cross-links. The thermoreversibility of the system was shown by a combination of equilibrium swelling and rheological measurements. Dynamic time sweeps of the rubber at different temperatures were used to determine the Arrhenius activation energies of 7.04 and 57.9kJ/mol for the DA and the rDA reactions, respectively. Ea,DA is relatively low and suggests a diffusion limitation while Ea,rDA correspond to values reported in literature. Both values were used to simulate cross-link density profiles as a function of time and temperature that correspond well with the experimental data.

Homopolymer and multi-block Diels-Alder polyphenylenes: Synthesis, physical properties, X-ray diffraction, and gas transport

A gas transport and X-ray structural analysis is reported for a methylated poly(phenylene) (MPP) and non-methylated poly(phenylene) (PP) homopolymer, a random copolymer, and MPP-PP block copolymers synthesized using Diels-Alder chemistry. These highly rigid and aromatic polymers display Tg’s of 400°C and 382°C for PP and MPP. Multi-block copolymerization of PP and MPP had a significant effect on the spatial arrangement of polymer chains as revealed by changes in the X-ray diffraction amorphous peak. The membranes displayed a narrower fractional free volume (FFV) from 0.288 to 0.304. The gas permeability, solubility, diffusivity and selectivity data for He, H2, O2, CO2, N2, and CH4 were determined for this polymer series. Gas permeability variation between PP and MPP was 1.5% for H2 (134 Barrers) and 16% for N2 (7.11 Barrers). However, the multi-block MPP-PP-B2 led to permeability increases between 22.4% for H2 (164 Barrers) and 61.7% for N2 (11.5 Barrers). This work reveals clear relationships between the ordering of the amorphous region and gas diffusivity and solubility. The permselectivity trade-off did not correlate well to gas kinetic diameter (KD), polymer chemistry or composition, and depended largely on the gas pair. This poly(phenylene) family displayed high permeability and moderate ideal gas selectivity that were near the upper bound. Permselectivity results are compared to polyphenylene oxide (PO), functionalized PO using (NH2 and NO2), 6FDA-DABA, and 6FDA-mPDA.

Preclinical evaluation of taxane-binding peptide-modified polymeric micelles loaded with docetaxel in an orthotopic breast cancer mouse model.

We developed a novel taxane-binding peptide (TBP) modified, biodegradable polymeric micelle that overcomes limitations of drug loading and poor serum stability typically seen with particle delivery, leading to enhanced pharmacokinetics and tumor distribution of docetaxel (DTX). The use of the taxane-binding peptide to increase docetaxel loading is particularly compelling as it takes advantage of a known intracellular binding mechanism in a new way. Docetaxel is a potent chemotherapeutic with a therapeutic index often limited by the toxicity of the excipients that are necessary to enhance its solubility for intravenous delivery. Our polymeric micelle has terminal furan groups that enable facile antibody Fab conjugation by Diels-Alder chemistry for targeted delivery. Compared to the conventional ethanolic polysorbate 80 formulation (Free DTX), our nanoparticle (NP DTX) formulation exhibited a two-fold increase in exposure and tumor accumulation. Notably, the reduced toxicity of the NP DTX formulation increased the therapeutic index and allowed for higher dosing regimens, with a maximum tolerated dose (MTD) 1.6-fold higher than that of the Free DTX formulation, which is significant and similar to enhancements observed in clinical products for docetaxel and other drugs. These improved properties led to enhanced mouse survival in an orthotopic model of breast cancer; however, the targeted formulation of Fab-NP DTX did not further improve efficacy. Together, these results clearly demonstrate the benefits of the TBP-modified polymeric micelles as promising carriers for docetaxel.

Ultrafast Self-Healing Nanocomposites via Infrared Laser and Their Application in Flexible Electronics.

The continuous evolution toward flexible electronics with mechanical robust property and restoring structure simultaneously places high demand on a set of polymeric material substrate. Herein, we describe a composite material composed of a polyurethane based on Diels-Alder chemistry (PU-DA) covalently linked with functionalized graphene nanosheets (FGNS), which shows mechanical robust and infrared (IR) laser self-healing properties at ambient conditions and is therefore suitable for flexible substrate applications. The mechanical strength can be tuned by varying the amount of FGNS and breaking strength can reach as high as 36 MPa with only 0.5 wt % FGNS loading. On rupture, the initial mechanical properties are restored with more than 96% healing efficiency after 1 min irradiation time by 980 nm IR laser. Especially, this is the highest value of healing efficiency reported in the self-healable materials based on DA chemistry systems until now, and the composite exhibits a high volume resistivity up to 5.6 × 1011 Ω·cm even the loading of FGNS increased to 1.0 wt %. Moreover, the conductivity of the broken electric circuit which was fabricated by silver paste drop-cast on the healable composite substrate was completely recovered via IR laser irradiating bottom substrate mimicking human skin. These results demonstrate that the FGNS-PU-DA nanocomposite can be used as self-healing flexible substrate for the next generation of intelligent flexible electronics.

A covalently cross-linked reduced functionalized graphene oxide/polyurethane composite based on Diels–Alder chemistry and its potential application in healable flexible electronics

A novel composite of reduced functionalized graphene oxide/polyurethane based on Diels–Alder chemistry was developed which could be healed microwaves with high efficiency and applied in healable flexible electronics.

Chemically reprogrammable metal organic frameworks (MOFs) based on Diels-Alder chemistry.

We present the reversible Diels-Alder functionalization of metal organic frameworks (MOFs). Cyclopentadiene (Cp) functional MOFs are ligated with dienophiles to fabricate functional MOFs with a reprogrammable chemical nature. Our strategy thus constitutes an unprecedented concept for chemically dynamic MOFs able to be recoded.

Diels-Alder reactions of graphene oxides: greatly enhanced chemical reactivity by oxygen-containing groups.

Graphene oxides (GOs) or reduced GOs (rGOs) may offer extraordinary potential for chemical functionalization of graphene due to their unique electronic and structural properties. By means of dispersion-corrected density functional theory computations, we systematically investigated the Diels-Alder (DA) chemistry of GOs. Our computations showed that the dual nature of GOs as both a diene and a dienophile is stronger than that of pristine graphene. Interestingly, the interior bonds of a graphene surface modified by oxygen-containing groups could be functionalized by maleic anhydride (MA) and 2,3-dimethoxybutadiene (DMBD) through cycloaddition reactions, and the cycloaddition products of MA and DMBD are more favorable than the non-covalent complexes between these reagents and the GO surface. The feasibility of covalent functionalization of GOs as a diene and a dienophile strongly depends on the local structural environment of the oxygen groups, including the atomic arrangement and the number of these groups surrounding the reaction site. The exothermicities for (4+2) adducts of DMBD with GO are far larger than those of MA, which indicates that the dienophile character of the GO surface is stronger than its behavior as a diene.

Dynamic covalent single chain nanoparticles based on hetero Diels-Alder chemistry.

We introduce the fully reversible folding of single chain nanoparticles (SCNPs) based on covalent hetero Diels-Alder (HDA) chemistry. A cyclopentadiene (Cp)-protected cyanodithioester (CDTE) monomer is designed and copolymerized with methyl methacrylate (MMA) via RAFT polymerization. The polymer chains are folded and subsequently unfolded by exploiting the reversible nature of the HDA reaction.

Preparation of tetrazine-containing [2 + 1] complexes of 99mTc and in vivo targeting using bioorthogonal inverse electron demand Diels-Alder chemistry.

The aim of this work was to synthesize and evaluate [2 + 1] 99mTc(i) polypyridine complexes containing tetrazines, which along with the corresponding Re(i) complexes, represent a new class of isostructural nuclear and turn-on luminescent probes that can be derivatized and targeted using bioorthogonal chemistry. To this end, [2 + 1] complexes of 99mTc(i) of the type [99mTc(CO)3(N^N)(L)] (N^N = bathophenanthroline disulfonate (BPS) or 2,2'-bipyridine (bipy)), where the monodentate ligand (L) was a tetrazine linked to the metal through an imidazole derivative, were prepared. The desired products were obtained in nearly quantitative radiochemical yield by adding [99mTc(CO)3(N^N)(OH2)]n to the imidazole-tetrazine ligand and heating at 60 °C for 30 min. Measurement of the reaction kinetics between the tetrazine and (E)-cyclooct-4-enol revealed a second-order rate constant of 8.6 × 103 M-1 s-1 at 37 °C, which is suitable for in vivo applications that require rapid coupling. Stability studies showed that the metal complexes were resistant to ligand challenge and exhibited reasonable protein binding in vitro. Biodistribution studies of the more water-soluble BPS derivative in normal mice, one hour after administration of a bisphosphonate derivative of trans-cyclooctene (TCO-BP), revealed high activity concentrations in the knee (9.3 ± 0.3 %ID g-1) and shoulder (5.3 ± 0.7 %ID g-1). Using the same pretargeting approach, SPECT/CT imaging showed that the [2 + 1] tetrazine complex localized to implanted skeletal tumors. This is the first report of the preparation of 99mTc complexes of BPS and demonstration that their tetrazine derivatives can be used to prepare targeted imaging probes by employing bioorthogonal chemistry.

Exploring structural effects in single-chain “folding” mediated by intramolecular thermal Diels–Alder chemistry

We describe a method to fold single polymer chains into nanoparticles using simple thermal Diels–Alder (DA) chemistry.

Thermally reversible self-healing polysilsesquioxane structure-property relationships based on Diels-Alder chemistry

An in-depth examination of the self-healing properties of both dienophile and diene functionalized ladder-like structured polysilsesquioxane copolymers and terpolymers was investigated. Through functionalization of both diene and dienophile on the double-stranded siloxane backbone with ternary n-alkyl functional groups acting as chain mobility control, the effect of chain mobility and chemical structure on self-healing and mechanical properties were elucidated. All of the single component self-healing hybrid materials exhibited fast healing times (∼5 min), and their de-crosslinked adducts exhibited exceptional retention of solubility in common organic solvents for good reusability, all while having inherent high thermal stability and optical transparency.