Dielectric Surface Research Articles

Excited‐State Dynamics and Optical Properties of Silica Under Ultrafast Laser Irradiation

AbstractExcited by intense infrared ultrafast light pulses, a wide bandgap material undergoes nonlinear ionization, generating a high density of free electrons in conduction states. As a result, the electronic band structure is critically modified and the bandgap shrinks. This induces rapid changes in optical properties, dramatically affecting the absorption spectrum during light coupling to the dielectric surface or during nonlinear propagation inside the bulk. This study analyzes the structural behavior and the modification of the optical properties of laser‐excited silica glass at the molecular cluster level through first‐principles simulations. Employing density functional theory and the GW approximations for band structure under nonequilibrium conditions, alongside the Bethe–Salpeter equation, the dynamics of the optical properties of fused silica are comprehensively explored. The behavior of excited fused silica in a wide photon energy range (from a few to 20 eV) is thus predicted. Laser‐induced electron excitation triggers a redistribution of charges between oxygen and silicon atoms, accompanied by a significant increase in electronic pressure, local atomic structure rearrangement, and material expansion. Molecular dynamics simulations offer a temporal perspective on the excited state dynamics, unveiling the intricate interplay between electronic and atomic effects on bandgap evolution. The analysis sheds light on excitonic resonances, intraband and interband transitions in fused silica under ultrafast laser irradiation, providing valuable insights into its excited state behavior and optical properties.

Ectonic Model and Erosion Mechanisms in a Pulsed Vacuum Arc Initiated by a Spark Discharge along the Dielectric Surface

Ectonic Model and Erosion Mechanisms in a Pulsed Vacuum Arc Initiated by a Spark Discharge along the Dielectric Surface

Aluminosilicate-based material fabricated from fly ash for energy harvesting application

A triboelectric nanogenerator (TENG) is an emerging energy harvesting technology that utilizes the combination of triboelectrification and electrostatic induction to collect wasted mechanical energy and convert it into electricity. In this work, an aluminosilicate (AS)-based composite, considered as a potential alternative to cement material, has been developed for the fabrication of TENGs. Herein, the AS material is synthesized through the alkali activation of fly ash using a mixture of sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) solutions as activating agents. The electrical output of AS TENGs can be optimized by tuning the liquid-to-solid powder (L/S) ratio during the fabrication of AS composites. The AS composites fabricated at different L/S ratios exhibit the variations in dielectric properties, surface morphology and microstructure. It is found that a high dielectric constant is not the only requirement for achieving optimal TENG output performance. The contribution of dielectric properties and microstructures of the AS composites on TENG performance is discussed. The AS composite with an optimal L/S ratio of 0.5 results in the highest TENG power output density of 2.78 W/m2. Additionally, the versatility of AS TENG to harvest mechanical energy and its application as a power source for portable electronic device are demonstrated. This research has proposed the promising aspect of AS composites as alternative construction materials capable of harvesting mechanical energy, which is essential for the development of green and sustainable power sources.

An Analytical Adhesion Model for Elastic Contact Electrification

Abstract Contact electrification is a universal phenomenon that commonly occurs in almost every solid–solid contact pair. The tribo-charges deposited on two surfaces by contact electrification can significantly affect adhesion; however, contact electrification is often overlooked in the study of adhesive contact. Here, we develop an analytical model to investigate electroadhesion during the contact phase between two initially uncharged dielectric surfaces, namely, an elastic parabolic surface and a rigid flat. A system of nonlinear equations is derived to describe the relationship between the indentation, normal load, radius of contact area, and radius of the charged zone using the Barthel–Maugis–Dugdale model (Barthel, 1999, “Modelling the Adhesion of Spheres: When the Form of the Interaction Is Complex, Colloids. Surf., A., 149, pp. 99105.). The analytical results show good agreement with the numerical results of the full self-consistent contact model. When contact electrification leads to a higher tribo-charge density and a larger charged zone, it has a greater impact on the normal traction, interfacial gap, force-approach curves, jump-out, and dissipated energy. The analytical model developed in this study serves as the foundation for advances in rough surface electroadhesive contact and electroadhesion testing, and it sheds light on the usage of adhesive joints in ultra-high vacuum environments and outer space, where contact electrification has a significant impact.

Hierarchically structured poly(lactic acid) nanofibers by organic–inorganic nanohybridization strategy towards efficient PM removal and respiratory monitoring

Despite the enormous potential in efficient removal of airborne PMs by biodegradable poly(lactic acid) (PLA) nanofiberous membranes (NFMs), current manufacturing methods still have large function gaps in providing reliable control over the fiber microstructure, membrane morphology or electret properties. Herein, the concept of organic–inorganic nanohybridization, strategically involving the combined electrospinning of PLA/TiO2 and electrospray of ZIF-8 nanodielectrics, was conceived to engender PLA NFMs (PLA/TIO@ZIF) featuring largely promoted electroactivity and surface activity, as exemplified by the increased dielectric constant and surface potential (up to 3.47 and 8.5 kV, respectively). This conferred the PLA/TIO@ZIF NFMs remarkable triboelectric nanogenerator (TENG) properties, yielding the output voltage as high as 17.9 V at 10 N and 1 Hz, and output current of 39.6 nA as driven by the humanoid respiration. Given impressive in situ electret performance and charge regeneration capability, the PLA/TIO@ZIF NFMs enabled ultrahigh PM0.3 filtering properties (90.4 %, 175 Pa, 85 L/min), accompanied by increased resistance to humidity (92.1 % removal of PM0.3, RH90 %, 32 L/min). Moreover, perfect 100 % inhibition of E. coli and S. aureus was achieved for PLA/TIO@ZIF, arising mainly from the plentiful surface charges and ROS generation. It is envisioned that the hierarchically nanostructured NFMs, offering the exceptional function integration, are highly appealing for long-term air purification and self-powered respiratory monitoring.

An integrated atom array-nanophotonic chip platform with background-free imaging

Arrays of neutral atoms trapped in optical tweezers have emerged as a leading platform for quantum information processing and quantum simulation due to their scalability, reconfigurable connectivity, and high-fidelity operations. Individual atoms are promising candidates for quantum networking due to their capability to emit indistinguishable photons that are entangled with their internal atomic states. Integrating atom arrays with photonic interfaces would enable distributed architectures in which nodes hosting many processing qubits could be efficiently linked together via the distribution of remote entanglement. However, many atom array techniques cease to work in close proximity to photonic interfaces, with atom detection via standard fluorescence imaging presenting a major challenge due to scattering from nearby photonic devices. Here, we demonstrate an architecture that combines atom arrays with up to 64 optical tweezers and a millimeter-scale photonic chip hosting more than 100 nanophotonic cavities. We achieve high-fidelity ( ~ 99.2%), background-free imaging in close proximity to nanofabricated cavities using a multichromatic excitation and detection scheme. The atoms can be imaged while trapped a few hundred nanometers above the dielectric surface, which we verify using Stark shift measurements of the modified trapping potential. Finally, we rearrange atoms into defect-free arrays and load them simultaneously onto the same or multiple devices.

Experimental Observation of Space-Charge Field Screening of a Relativistic Particle Bunch in Plasma.

The space-charge field of a relativistic charged bunch propagating in plasma is screened due to the presence of mobile charge carriers. We experimentally investigate such screening by measuring the effect of dielectric wakefields driven by the bunch in a uncoated dielectric capillary where the plasma is confined. We show that the plasma screens the space-charge field and therefore suppresses the dielectric wakefields when the distance between the bunch and the dielectric surface is much larger than the plasma skin depth. Before full screening is reached, the effects of dielectric and plasma wakefields are present simultaneously.

A novel mathematical approach for modeling the dielectric response surface of the transformer oil to predict the optimized functions of transformers in high-power applications

A novel mathematical approach for modeling the dielectric response surface of the transformer oil to predict the optimized functions of transformers in high-power applications

Characterization Of The Electrothermal Conversion Mechanisms Of A Plasma Actuator For Icing Control

The characterization of a new icing protection system, specifically a dielectric barrier discharge (DBD) plasma actuator, is conducted in this study. The system operates by establishing an AC high voltage between two electrodes arranged on opposite sides of a dielectric material. This setup generates a plasma on the dielectric surface, which in turn induces a significant temperature rise (about 30°C) in both the dielectric surface and the surrounding air. To gain a comprehensive understanding of the electrothermal conversion mechanisms involved in the discharge, a Planar Laser Induced Fluorescence technique is employed. Using a two-colour one-dye ratiometric method (PLIF2c1d), the technique provides measurements of the temperature evolution of an ice droplet deposited on the actuator during its melting process by the discharge. An annular actuator configuration is chosen to minimise the effect of the generated ionic wind and maintain the droplet in the discharge. A pyranine and sucrose solution is identified and temperature calibrated. The calibration process involves depositing a droplet of the solution in a temperature-controlled enclosure capable of reaching temperatures as low as -22°C. Through detailed spectral analysis, two specific detection spectral bands are selected for the imaging applications. These bands enable measurements of the ice temperature with a sensitivity of 7.61%/°C. The effects of laser light scattering by ice and fluorescence reabsorption are also investigated by varying the ice thickness. They are found to have limited influence on the fluorescence emission when the solution in ice form. Finally, the capacity of the technique is evaluated by measuring the ice temperature evolution during the melting induced by a plasma discharge. Droplets are deposited on two dielectric materials, namely PTFE and Sapphire, which possess distinct thermal and dielectric properties. Comparisons under varying plasma discharge power levels provide valuable insights into the optimization of DBD plasma actuators for effective icing protection.

Powerful numerical method for analysis of electromagnetic scattering from multiple 3D coated targets buried under rough surface

ABSTRACT In this work, an efficient numerical method is proposed for three-dimensional (3D) electromagnetic scattering from multiple coated targets buried under a two-dimensional dielectric rough surface. In the proposed method, the interior region of each coated target is regarded as an independent subregion. The field within each coated target is modeled by 3D vector finite element method (FEM). The multiple scattering interactions between the buried targets and between targets and rough surface are considered by the electric field integral equation and the Poggio–Miller–Chang–Harrington–Wu integral equations, respectively. The fields inside and outside the targets are coupled together via boundary conditions on the boundary of each target. To improve the calculation efficiency and reduce the memory requirement, the fast multipole technique is used in our method. The presented method is numerically validated by comparing it with method of moments and conventional FEM-boundary integral method (BIM). The results indicate that, compared with traditional FEM-BIM, our method has significant advantages in computational efficiency and memory requirements.

Fabrication of Cu2O plated carbon fabrics via electrochemical deposition method

Functional fabrics have many advanced applications to meet the expectations of the end-user industry. There is a variety of approaches to impart functional properties to the fabrics including coatings, the addition of functional fillers, surface modifications, etc. Metallization techniques are also a good candidate to impart functionalities to textile fabrics. On the other hand, Cu2O is a diamagnetic solid that has a variety of applications from flexible electronics to gas sensing. In this study, one of the simplest plating techniques, the electroplating method, was applied to carbon fabric to provide Cu2O coating on the surface which can add the advantages of metal oxides on carbon fabric. The Cu2O particles were observed on the surface of carbon fabric using SEM and the elemental composition of the surface was investigated using the EDS method. The crystal structure of the coating was identified using the X-ray diffraction technique and Raman spectroscopy. To confirm the achieved structure, FTIR analysis was performed as well. The newly fabricated structure can be a promising candidate for supercapacitors, electromagnetic shielding materials, dielectric surfaces, etc.

Enhanced dielectric properties of nanocomposites with cyanoethyl cellulose and core‐shell structured BaTiO3@Al2O3 fillers

AbstractThe interface between the polymer matrix and inorganic fillers plays a determinative role in dielectric properties of the composites. In this work, dielectric composites containing core‐shell structured BaTiO3@Al2O3 (BT@AO) nanoparticles and cyano functionalized cellulose (cyanoethyl cellulose, CEC) were prepared to achieve enhanced interface and dielectric properties. With the wide bandgap Al2O3 (AO) shell, the carrier motion inspired by elevating electric filed and temperature was significantly impeded in the composites. Meanwhile, the moderate dielectric constant and surface energy of AO shell between CEC and BaTiO3 (BT) alleviated the inhomogeneous local electric field distribution and improve the interfacial compatibility between inorganic filler and CEC matrix. As a result, enhanced dielectric properties including restrained dielectric loss (0.23 for BT@AO/CEC versus 0.51 for BT/CEC at 100 Hz), suppressed conductivity, increased breakdown strength and improved dielectric constant were accessed in the BT@AO/CEC composites. The excellent thermal conductivity of AO also offered the composites with additional advantage of low electrical conductivity at high temperature of 100°C (1.56 × 10−10 S/cm) exhibiting two orders of magnitude smaller than that of pure CEC.Highlights Core‐shell structured BaTiO3@Al2O3 were prepared and incorporated into cyanoethylated cellulose to yield flexible nanocomposites. Carrier motion was significantly restricted by the wide band gap of Al2O3 shell. Enhanced interfacial compatibility was accessed in the BaTiO3@Al2O3/CEC composite. Improved dielectric properties and thermal conductivity were achieved.

Enhance Carrier Diffusion of Monolayer MoSe2 by Interface Engineering.

Two-dimensional materials hold great potentials for beyond-CMOS (complementary metal-oxide-semiconductor) electronical and optoelectrical applications, and the development of field effect transistors (FET) with excellent performance using such materials is of particular interest. How to improve the performance of devices thus becomes an urgent issue. The performance of FETs depends greatly on the intrinsic electrical properties of the channel materials, meanwhile the device interface quality, such as extrinsic scattering of charged impurities, charge traps, and substrate surface roughness have a great influence on the performance. In this paper, the impact of the interface quality on the carrier diffusion behaviors of monolayer (ML) MoSe2 has been investigated by using an in situ ultrafast laser technique to avoid the surface contamination during device fabrication process. Two types of self-assembled monolayers (SAMs) are introduced to modify the gate dielectric surface through an interface engineering approach to obtain chemical-stable interfaces. The results showed that the transport properties of ML MoSe2 were enhanced after interface engineering, for example, the carrier mobility of ML MoSe2 was improved from ∼59.4 to ∼166.5 cm2 V-1 s-1 after the SAM modification. Meanwhile, the photocarrier dynamics of ML MoSe2 before and after interfacial engineering were also carefully studied. Our studies provide a feasible method for improving the carrier diffusion behaviors of such materials, and making them suited for application in future integrated circuit.

Oblique streaming waves observed in multipactor-induced plasma discharge above a dielectric surface

In a recent discovery (Wen et al 2022 Phys. Rev. Lett. 129 045001), streaming waves were found in multipactor-induced plasma discharges. However, due to the limitations of a 1D simulation setup, these waves displayed only transverse dynamics. In this letter, an extended 2D particle-in-cell/Monte Carlo model is used to simulate multipactor-induced plasma discharge above a dielectric surface. The results reveal that the streaming waves are not solely transverse but oblique, featuring both transverse and longitudinal components of the wave vector. Furthermore, it is identified that the sheath-accelerated field-emission electrons, rather than the previously reported secondary emission electrons, predominantly cause the excitation of streaming waves. The simulated wave spectrum achieves an excellent agreement with the theoretical dispersion relation. The identification of oblique streaming waves provides new insights into multipactor physics and is anticipated to inspire novel mitigation strategies for multipactor-induced breakdown processes.

Effect of nitrogen/oxygen ratios on surface charge distributions generated by repetitive surface dielectric barrier discharges

Studies on the dielectric surface parameters and dielectric barrier discharges (DBD) characteristics considering the influence of gases in DBD on the surface charge distribution are scarce. Thus, to overcome this research gap, this study measured the potential distributions of AC-driven surface DBD in oxygen (O2), synthetic air and nitrogen (N2) as background gases using the Pockels effect. The results showed that the patterns of the filamentary discharges generated during the positive voltage polarity phase differed depending on the O2 ratio. In addition, the electrostatic repulsion forces between the residual charge and the newly created filament were analysed from the measured potential distribution and the greatest effect was observed in air, rather than in N2 and O2. The potential distribution was transformed into a charge density distribution and compared with the discharge luminescence in air and N2. The results showed that the shape of the filament tip differed between the charge density and discharge luminescence only in the case of air, which was attributed to the effect of attachment reactions on the formation of residual charge. The measurements showed that in a surface discharge, similar to the case in a volume discharge, the photoionisation and ionisation coefficients significantly affected the geometrical properties of the discharges.

Sensitivity enhanced flexible capacitive pressure sensor microstructure optimization for biomedical applications

This paper explores the design and optimization of Flexible Capacitive Pressure Sensors (FCPS) using microfabrication technology for applications in the emerging field of flexible electronics, with a particular focus on measuring bio-signals characterized by lower pressure ranges. Sensitivity, a critical parameter for effective FCPS performance, is investigated through a comprehensive series of simulation analyses employing finite element modeling. The study involves varying geometrical and mechanical parameters that influence FCPS performance, individually adjusting each parameter while keeping others constant. Microstructures such as cuboids, truncated pyramids with an aspect ratio of 0.5, cylinders, pyramids, and cones are modeled on the dielectric material surface. The parameters considered include inter-space, base length, height, and elastic modulus, to enhance FCPS sensitivity and linearity. Among the different shapes modeled, the cone exhibits the highest sensitivity, followed by the pyramid structure. Comparative analysis indicates that the cone and pyramid shapes demonstrate 15- and 10-times higher sensitivity, respectively, compared to the cuboid structure under an applied pressure of 10 Pa. Simulation results suggest that sensitivity can be finely tuned, with higher inter-space and microstructure height, as well as lower base length and Young’s modulus of the dielectric material, contributing to increased sensitivity. However, it is noted that these conditions may lead to decreased capacitance in the absence of applied pressure due to air occupation relative to the dielectric material. The findings are further compared with existing literature, and the FCPS response analysis provides valuable insights for the future design of FCPS, particularly in the context of biomedical applications requiring precise low-pressure signal measurements. This research contributes to advancing the understanding of FCPS performance optimization and lays the groundwork for the development of sensors with enhanced sensitivity for bio-medical applications.

Tuning Electrode Work Function and Surface Energy for Solution Shearing High-Performance Organic Field-Effect Transistors.

A bottom-contact organic field-effect transistor (OFET) is easily adaptable to the standard lithography process because the contact electrodes are deposited before the organic semiconductor (OSC). However, the low surface energy of bare electrodes limits utilizing solution-processed single-crystal OSCs. Additionally, the bare electrode usually leads to a significant charge injection barrier, owing to its relatively low work function (WF). Here, we simultaneously improved the surface energy and WF of gold electrodes by conducting oxygen plasma treatment to achieve high-performance OFET based on solution-processed organic single crystals. We cultivated a thin layer of gold oxide on Au electrodes to increase the WF by ∼0.7 eV. The surface energy of Au electrodes was enhanced to the same as AlOx dielectric surface, enabling the seamless growth of large-area C8-BTBT (2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene) organic single-crystal thin films via solution shearing. This technique facilitates the production of high-performance OFETs with the highest carrier mobility of 6.7 cm2 V-1 s-1 and sharp switching characterized by a subthreshold swing of 63.6 mV dec-1. The bottom-contact OFETs exhibited a lower contact resistance of 1.19 kΩ cm than its F4-TCNQ-doped top-contact control device. This method offers a straightforward and effective strategy for producing high-quality single-crystal OFETs, which are potentially suitable for commercial applications.

Long Propagating Polaritonic Heat Transfer: Shaping Radiation to Conduction.

Surface phonon polaritons (SPhPs) originate from the coupling of mid-IR photons and optical phonons, generating evanescent waves along the polar dielectric surface. The emergence of SPhPs gives rise to a phase of quantum matter that facilitates long-range energy transfer (100s μm-scale). Albeit of the recent experimental progress to observe the enhanced thermal conductivity of polar dielectric nanostructures mediated by SPhPs, the potential mechanism to present the high thermal conductivity beyond the Landauer limit has not been addressed. Here, we revisit the comprehensive theoretical framework to unify the distinct pictures of two heat transfer mechanisms by conduction and radiation. We first designed our experimental platform to distinguish contributions of two distinct fundamental modes of SPhPs, resulting in far-field radiation and long propagating conduction, respectively, by tuning the configuration of a nanostructured heat channel integrated into the thermometer. We could effectively control the transmission of long-propagating SPhPs to influence the apparent thermal conductivity of the nanostructure. This study reveals the high thermal conductance of 1.63 nW/K by a fast SPhP mode comparable to that by classical phonons, with measurements showing apparent conductivity values of up to 2 W/m·K at 515 K. The origin of the enhanced thermal conductivity was exploited by observing the interference of dispersive evanescent waves by double heat channels. Furthermore, our experimental observations of length-dependent thermal conductance by SPhPs are in good agreement with the revisited Landauer formula to illustrate a polaritonic mode of heat conduction, considering the dispersive nature of radiation not limited to the physical boundaries of a solid object yet directionally guided along the surface.

Poly‐DADMAC Functionalized Polyethylene Oxide Composite Nanofibrous Mat as Highly Positive Material for Triboelectric Nanogenerators and Self‐Powered Pressure Sensors

AbstractThe triboelectric nanogenerator (TENG) is a promising technology for self‐powered sensors and vibration‐driven energy harvesting, with its development especially influenced by the characteristics of tribomaterials. However, developing tribopositive materials with a strong cationic effect and high electron‐donating capability remains challenging. In this study, a novel polyethylene oxide@poly(diallyldimethylammonium chloride) (PEO@Poly‐DADMAC) composite nanofiber mat (NFM) is successfully fabricated using the electrospinning technique. It functions as a highly tribopositive material, particularly enhancing the performance of nanofiber‐based TENGs (NF‐TENGs). Through investigation of its physical and triboelectric properties, the study revealed that incorporating cationic Poly‐DADMAC with PEO effectively boosts NF‐TENG output by increasing the dielectric constant (twofold), electron‐donating affinities, and surface charge trapping capability. The fabricated NF‐TENG shows excellent output performance generating 980 V, a maximum power density of 5.6 Wm−2, and an ultrahigh sensitivity of 8.923 V kPa−1 which endows composite reliability for power supply and sensing capability. More importantly, the PEO@Poly‐DADMAC‐based self‐powered motion sensor with an NF‐TENG array is successfully demonstrated in multifunctional applications such as athlete activity tracking, and wireless gaming interface control. This study not only offers new insights into optimizing performance and selecting alternative tribomaterials but also provides valuable guidance for developing high‐output TENGs and highly sensitive self‐powered sensors.

Commercial-Grade Dielectrics Surface Metallization by Direct Laser Deposition from Deep Eutectic Solvents

Commercial-Grade Dielectrics Surface Metallization by Direct Laser Deposition from Deep Eutectic Solvents