Device Attachment Research Articles

High-temperature reliability of low-temperature and pressureless micron Ag sintered joints for die attachment in high-power device

Micron Ag paste had a more affordable price, feasible large-scale synthesis, and longer storage life compared to nano Ag paste, thus it attracts much industrial interest for die attachment of high-power devices. However, the previous studies of high-temperature reliability were mainly focused on nano Ag joints, the research about reliability of micron Ag joints, especially low-temperature and pressureless, was very limited. Therefore, we evaluated high-temperature stability of low-temperature and pressureless micron Ag joint, involving in the changes of mechanical behaviors, evolution of microstructure and interfacial reliability. The average joint strength of micron Ag joints was independent of aging time and kept approximately 35 MPa after aging for 1000 h. The fracture of the micron joint was dominated by the ductile deformation of Ag grains during the fracture process. On the other hand, the microstructure of porous structure evolved greatly during aging process. Ag grains were oriented randomly before and after aging process, but the Ag grains increased slightly from 827.2 nm initially to 1178.4 nm after 1000 h aging. Meanwhile, the pores size in porous structure increased, the number decreased significantly, and the porosity also decreased slightly. Moreover, the barrier layers at interfaces of micron Ag joint remained stable and reliable during aging at 250 °C. The results would promote the large-scale application of the commercially available micron Ag paste in high-power devices.

Transesophageal echo X-plane view of the mitral valve post MitraClip placement showing a single leaflet device attachment of MitraClip to the anterior mitral leaflet

Transesophageal echo X-plane view of the mitral valve post MitraClip placement showing a single leaflet device attachment of MitraClip to the anterior mitral leaflet

Practical Application and Analysis of Lead-Free Solder on Chip-On-Flip-Chip SiP for Hearing Aids

Abstract Due to rapid growth of the microelectronics industry, packaged devices with small form factors, low costs, high power performance, and increased efficiency have become of high demand in the market. To realize the current market development trend, flip chip interconnection and System-in-Package (SiP) are some of the promising packaging solutions developed. However, a surprising amount of surface mount technology (SMT) defects are associated with the use of lead-free solder paste and methods by which the paste is applied. Two such defects are solder extrusion and tombstoning. Considerable amount of defects associated with solder overflow are found on chip-on-flip-chip (COFC) SiP in hearing aids. Through the use of design of experiments (DOE), lead-free solder defect causes on hearing aids application can be better understood and subsequently reduced or eliminated. This paper will examine the failure modes of solder extrusion and tombstoning that occurred when two different types of lead-free solders, Sn-Ag-Cu (SAC) and BiAgX were used within a SiP for attachment of surface mount devices (SMD) chip components for hearing aid applications. The practical application and analysis of lead-free solder for hearing aids will include the comprehensive failure analysis of the SMD components and compare the modeling and analysis of the two different solder types through the DOE process.

Fourteen Day In Vivo Testing of a Compliant Thoracic Artificial Lung.

The compliant thoracic artificial lung (cTAL) has been studied in acute in vivo and in vitro experiments. The cTAL's long-term function and potential use as a bridge to lung transplantation are assessed presently. The cTAL without anticoagulant coatings was attached to sheep (n = 5) via the pulmonary artery and left atrium for 14 days. Systemic heparin anticoagulation was used. Compliant thoracic artificial lung resistance, cTAL gas exchange, hematologic parameters, and organ function were recorded. Two sheep were euthanized for nondevice-related issues. The cTAL's resistance averaged 1.04 ± 0.05 mmHg/(L/min) with no statistically significant increases. The cTAL transferred 180 ± 8 ml/min of oxygen with 3.18 ± 0.05 L/min of blood flow. Except for transient surgical effects, organ function markers were largely unchanged. Necropsies revealed pulmonary edema and atelectasis but no other derangements. Hemoglobin levels dropped with device attachment but remained steady at 9.0 ± 0.1 g/dl thereafter. In a 14 day experiment, the cTAL without anticoagulant coatings exhibited minimal clot formation. Sheep physiology was largely unchanged except for device attachment-related hemodilution. This suggests that patients treated with the cTAL should not require multiple blood transfusions. Once tested with anticoagulant coatings and plasma resistant gas exchange fiber, the cTAL could serve as a bridge to transplantation.

Enhancing Low-Temperature and Pressureless Sintering of Micron Silver Paste Based on an Ether-Type Solvent

Micron silver paste enables a low-temperature and pressureless sintering process by using an ether-type solvent CELTOL-IA (C x H y O z , x > 10, boiling point of approximately 200°C) for the die attachment of high-powered devices. The conductive patterns formed by the silver paste had a low electrical resistivity of 8.45 μΩ cm at 180°C. The paste also achieved a high bonding strength above 30 MPa at 180°C without the assistance of pressures. These superior performance indicators result from the favorable removal of the solvent, its thermal behavior, and its good wetting on the silver layer. The results suggest that the micron silver paste with a suitable␣solvent can promote the further spreading of next-generation power devices owing to its marked cost advantage and excellent performance.

Development and assessment of a hand assist device: GRIPIT

BackgroundAlthough various hand assist devices have been commercialized for people with paralysis, they are somewhat limited in terms of tool fixation and device attachment method. Hand exoskeleton robots allow users to grasp a wider range of tools but are heavy, complicated, and bulky owing to the presence of numerous actuators and controllers. The GRIPIT hand assist device overcomes the limitations of both conventional devices and exoskeleton robots by providing improved tool fixation and device attachment in a lightweight and compact device. GRIPIT has been designed to assist tripod grasp for people with spinal cord injury because this grasp posture is frequently used in school and offices for such activities as writing and grasping small objects.MethodsThe main development objective of GRIPIT is to assist users to grasp tools with their own hand using a lightweight, compact assistive device that is manually operated via a single wire. GRIPIT consists of only a glove, a wire, and a small structure that maintains tendon tension to permit a stable grasp. The tendon routing points are designed to apply force to the thumb, index finger, and middle finger to form a tripod grasp. A tension-maintenance structure sustains the grasp posture with appropriate tension. Following device development, four people with spinal cord injury were recruited to verify the writing performance of GRIPIT compared to the performance of a conventional penholder and handwriting. Writing was chosen as the assessment task because it requires a tripod grasp, which is one of the main performance objectives of GRIPIT.ResultsNew assessment, which includes six different writing tasks, was devised to measure writing ability from various viewpoints including both qualitative and quantitative methods, while most conventional assessments include only qualitative methods or simple time measuring assessments. Appearance, portability, difficulty of wearing, difficulty of grasping the subject, writing sensation, fatigability, and legibility were measured to assess qualitative performance while writing various words and sentences. Results showed that GRIPIT is relatively complicated to wear and use compared to a conventional assist device but has advantages for writing sensation, fatigability, and legibility because it affords sufficient grasp force during writing. Two quantitative performance factors were assessed, accuracy of writing and solidity of writing. To assess accuracy of writing, we asked subjects to draw various figures under given conditions. To assess solidity of writing, pen tip force and the angle variation of the pen were measured. Quantitative evaluation results showed that GRIPIT helps users to write accurately without pen shakes even high force is applied on the pen.ConclusionsQualitative and quantitative results were better when subjects used GRIPIT than when they used the conventional penholder, mainly because GRIPIT allowed them to exert a higher grasp force. Grasp force is important because disabled people cannot control their fingers and thus need to move their entire arm to write, while non-disabled people only need to move their fingers to write. The tension-maintenance structure developed for GRIPIT provides appropriate grasp force and moment balance on the user’s hand, but the other writing method only fixes the pen using friction force or requires the user’s arm to generate a grasp force.

Self-contained optical enhancement film for printed photovoltaics

Printed photovoltaics promise lightweight and flexible light harvesting devices for conformal integration into buildings, portable electronics or vehicles. This is enabled by employing thin photoactive layers, which can reduce the use of sometimes costly and scarce absorber materials. Since this in turn comes along with an incomplete light absorption and hence restrains the power conversion efficiency of printed photovoltaics, their development was since long accompanied by integrated light management. However, besides a mere efficiency enhancement, new strategies should consider both functionality and additional costs of the light management. Optical enhancement strategies should consequently avoid complications with the delicate printing of the photovoltaic layers and therefore structures on the light incident surface of the device have been proposed. However, these air-faced approaches are prone to the impacts and stress of operating conditions and hence a protected solution is desired. Here we introduce a carefully designed photonic nanostructure embedded in a self-contained transparent film, which offers a conformal device attachment. An efficiency enhancement of 11% is demonstrated on an organic photovoltaic device. Angle dependent measurements moreover suggest a yearly increase of 13%, exploiting the seasonal asymmetry of the incident solar power by a built-in asymmetric diffraction.

Rapid formation of Ni3Sn4 joints for die attachment of SiC-based high temperature power devices using ultrasound-induced transient liquid phase bonding process

High melting point Ni3Sn4 joints for the die attachment of SiC-based high temperature power devices was successfully achieved using an ultrasound-induced transient liquid phase (TLP) bonding process within a remarkably short bonding time of 8s. The formed intermetallic joints, which are completely composed of the refined equiaxial Ni3Sn4 grains with the average diameter of 2μm, perform the average shear strength of 26.7MPa. The sonochemical effects of ultrasonic waves dominate the mechanism and kinetics of the rapid formation of Ni3Sn4 joints.

The method of attachment influences accelerometer-based activity data in dogs.

BackgroundAccelerometer-based activity monitoring is a promising new tool in veterinary medicine used to objectively assess activity levels in dogs. To date, it is unknown how device orientation, attachment method, and attachment of a leash to the collar holding an accelerometer affect canine activity data. It was our goal to evaluate whether attachment methods of accelerometers affect activity counts. Eight healthy, client-owned dogs were fitted with two identical neck collars to which two identical activity monitors were attached using six different methods of attachment. These methods of attachment evaluated the use of a protective case, positioning of the activity monitor and the tightness of attachment of the accelerometer. Lastly, the effect of leash attachment to the collar was evaluated. For trials where the effect of leash attachment to the collar was not being studied, the leash was attached to a harness. Activity data obtained from separate monitors within a given experiment were compared using Pearson correlation coefficients and across all experiments using the Kruskal-Wallis Test.ResultsThere was excellent correlation and low variability between activity monitors on separate collars when the leash was attached to a harness, regardless of their relative positions. There was good correlation when activity monitors were placed on the same collar regardless of orientation. There were poor correlations between activity monitors in three experiments: when the leash was fastened to the collar that held an activity monitor, when one activity monitor was housed in the protective casing, and when one activity monitor was loosely zip-tied to the collar rather than threaded on using the provided metal loop. Follow-up, pair-wise comparisons identified the correlation associated with these three methods of attachment to be statistically different from the level of correlation when monitors were placed on separate collars.ConclusionsWhile accelerometer-based activity monitors are useful tools to objectively assess physical activity in dogs, care must be taken when choosing a method to attach the device. The attachment of the activity monitor to the collar should utilize a second, dedicated collar that is not used for leash attachment and the attachment method should remain consistent throughout a study period.

Comparative Modeling and Analysis of Lead-Free Solder Extrusion for the Design of Reliability

Abstract Due to rapid growth of the microelectronics industry, packaged devices with small form factors, low costs, high power performance, and increased efficiency have become of high demand in the market. To realize the current market development trend, flip chip interconnection and System-in-Package (SiP) are some of the promising packaging solutions developed. However, a surprising amount of surface mount technology (SMT) defects are associated with the use of lead-free solder paste and methods by which the paste is applied. Two such defects are solder extrusion and tombstoning. Through the use of design of experiments (DOE), lead-free solder defect causes can be better understood and subsequently reduced or eliminated. This paper will examine the failure modes of solder extrusion and tombstoning that occurred when two different types of lead-free solders, Sn-Ag-Cu (SAC) and BiAgX were used within a SiP for attachment of surface mount devices (SMD) chip components. The systematic investigation will include the comprehensive failure analysis of the SMD components and compare the modeling and analysis of the two different solder types utilizing the design of experiments methods.

A minimum‐impact, flexible tool to study vocal communication of small animals with precise individual‐level resolution

Summary To understand both proximate and ultimate factors shaping vocal communication, it is fundamental to obtain reliable information of participating individuals on different levels: First, it is necessary to separate and assign the individuals' vocalisations. Secondly, the precise timing of vocal events needs to be retained. Thirdly, vocal behaviour should be recorded from undisturbed animals in meaningful settings. A growing number of studies used animal‐attached microphones to tackle these issues, but the implications for the study species and the research question often receded into the background. Here, we aim to initiate a discussion about the limitations, possible applications and the broader potential of such methods. Using lightweight wireless microphone backpacks (0·75 g including customised leg‐loop harness) combined with multi‐channel recording equipment, we captured vocal behaviour of small songbirds. We evaluated the effect of the devices at various levels, including an assessment of how vocal and locomotor activities were affected by initial device attachment and battery exchange. We compared our approach to existing studies and identified suitable research examples. We acquired continuous vocalisation recordings of zebra finches, and unequivocally assigned them to interacting individuals, with system‐based synchrony, irrespective of background noise. We found effects of initial backpack attachment and of battery replacement on vocal and locomotor activity, but they were minimised through the extended recording duration (ca. 16 days) that outlasted habituation effects (ca. 3 days). This method provides the tools to integrate individual vocal communications into a group setting, while enabling animals to behave freely in undisturbed, structured and acoustically complex environments. By minimising the effects on the animals, the behaviour under study, and ultimately on the research question, this approach will revolutionise the ability to capture individual‐level vocalisations in a variety of communication contexts, opening up many new opportunities to address novel research questions.

Characterisation of a novel light activated adhesive scaffold: Potential for device attachment

The most common methods for attaching a device to the internal tissues of the human body are via sutures, clips or staples. These attachment techniques require penetration and manipulation of the tissue. Tears and leaks can often be a complication post-attachment, and scarring usually occurs around the attachment sites. To resolve these issues, it is proposed to develop a soft tissue scaffold impregnated with Rose Bengal/Chitosan solution (RBC-scaffold, 0.01% w/v Rose Bengal, 1.7% w/v Medium Molecular Weight Chitosan). This scaffold will initially attach to the tissue via a light activation method. The light activates the dye in the scaffold which causes cross-links to form between the scaffold and tissue, thus adhering them together. This is done without mechanically manipulating the surrounding tissue, thus avoiding the issues associated with current techniques. Eventually, the scaffold will be resorbed and tissue will integrate for long-term attachment.A variety of tests were performed to characterise the RBC-scaffold. Porosity, interconnectivity, and mechanical strength were measured. Light activation was performed with a broad spectrum (380–780nm) 10W LED lamp exposed to various time lengths (2–15min, Fluence range 0.4–3J/cm2 ). Adhesive strength of the light-activated bond was measured with lap-shear tests performed on porcine stomach tissue. Cell culture viability was also assessed to confirm tissue integration potential. These properties were compared to Variotis™, an aliphatic polyester soft tissue scaffold which has proven to be viable for soft tissue regeneration.The RBC-scaffolds were found to have high porosity (86.46±2.95%) and connectivity, showing rapid fluid movement. The elastic modulus of the RBC-scaffolds (3.55±1.28MPa) was found to be significantly higher than the controls (0.15±0.058MPa, p<0.01) and approached reported values for human gastrointestinal tissue (2.3MPa). The maximum adhesion strength achieved of the RBC-scaffolds was 8.61±2.81kPa after 15min of light activation, this is comparable to the adhesion strength of fibrin glue on scaffolds. Cell attachment was seen to be similar to the controls, but cells appeared to have better cell survivability.In conclusion, the RBC-scaffolds show promise for use as a novel light activated attachment device with potential applications in attaching an anti-reflux valve in the lower oesophagus and also in wound healing applications for stomach ulcers.

A Study of Device Attachment to Mobile Application Perception Characteristics and Acceptance Attitude

A Study of Device Attachment to Mobile Application Perception Characteristics and Acceptance Attitude

Contrasting effects of GPS device and harness attachment on adult survival of Lesser Black‐backed Gulls Larus fuscus and Great Skuas Stercorarius skua

Telemetry has become an important method for studying the biology and ecology of animals. However, the impact of tracking devices and their method of attachment on different species across multiple temporal scales has seldom been assessed. We compared the behavioural and demographic responses of two species of seabird, Lesser Black‐backed Gull Larus fuscus and Great Skua Stercorarius skua, to a GPS device attached using a crossover wing harness. We used telemetry information and monitoring of breeding colonies to compare birds equipped with a device and harness, and control birds without an attachment. We assessed whether tagged birds have lower short‐term breeding productivity or lower longer term overwinter return rates (indicative of overwinter survival) than controls. For Great Skua, we also assessed whether territory attendance within the breeding season differed between tagged and control birds. As with previous studies on Lesser Black‐backed Gull, we found no short‐term impacts on breeding productivity or long‐term impacts on overwinter return rates. For Great Skua, there was no evidence for impacts of the device and harness on territory attendance or breeding productivity. However, as found by a previous study of Great Skuas using a different (body) harness design, there was strong evidence of reduced overwinter return rates. Consequently, a device attached using a wing harness was considered suitable for long‐term deployment on Lesser Black‐backed Gulls, but not on Great Skuas. These findings will inform the planning of future tracking studies.

A Head-Mounted Spectacle Frame for the Study of Mouse Lens-Induced Myopia.

The mouse model has been widely employed to explore the mysteries of myopia. For now, existing techniques for induction of experimental myopia in mice can be classified into three types: (1) devices directly glued to the fur; (2) devices attached using a combination of glue and sutures; (3) devices attached using a skull-mounted apparatus. These techniques each have its advantages, disadvantages when considering the devices stability, safety, complexity, effectiveness, and so forth. Thus, techniques for myopia induction in mice have yet to be further refined to popularize the applications. In this pilot study, we introduce a new head fixation device named the head-mounted spectacle frame apparatus for the study of mouse lens-induced myopia. Surgical procedures for device attachment were relatively simple and easy to learn in our study. Effective myopia induction was validated by retinoscopy refraction and axial length measurement using optical coherence tomography. In addition, it showed improved compliance and reliable safety when compared to the published methods. The head-mounted spectacle frame apparatus provides a new choice for the study of lens-induced myopia in mouse. It also allows for the use of form deprivation, making it attractive for future experimental mouse myopia trials.

A High Performance Power Module with &amp;gt;10kV capability to Characterize and Test In Situ SiC Devices at &amp;gt;200°C Ambient

Abstract This paper presents design, fabrication and characterization details of a 10kV power module package for &amp;gt;200°C ambient temperature applications. Electrical simulations were performed to confirm the module design, and that the electric field distribution throughout the module did not exceed dielectric capabilities of components and materials. A suitable copper etching process was demonstrated for DBC layout, and a high melting point Sn/Pb/Ag solder reflow process was developed for device and component attachment. To monitor the operational temperature of the module, a thermistor was integrated onto the substrate. A new silicone gel, having a working temperature up to 210°C, was evaluated and selected for encapsulation and, of great importance, for passivation of high voltage (10kV) SiC dies. An additive manufacturing ‘Design Process’ was developed and applied to printing the housings, molds, and test fixtures. Also, cleaning processes were evaluated for every step in the fabrication process. To verify performance of the modules, mechanical dies were mounted on the substrates, and a high temperature testing setup built to characterize the modules at high temperature. Measurements indicated that the module can operate up to 12kV within 25°C to 225°C, with less than 0.1 μA leakage current. The packaging was used for full-power characterization of developmental 10kV SiC diodes, and proved that the power module packaging satisfied all requirements for high voltage and high temperature applications. This work successfully validated the processes for creating high voltage (&amp;gt;10 kV) and high temperature (&amp;gt;200°C) power modules.

An Evaluation of the Use of Predicted Harness Spans for Correctly Fitting Leg-Loop Harnesses in Seabird Research

Abstract. Leg-loop harnesses for the attachment of telemetry devices have been used for over two decades in terrestrial bird research. Recently, the technique has been extended to waterbird applications. An equation exists for predicting the dimensions of correctly fitting leg-loop harnesses in terrestrial bird research. This equation appears robust to the varied life histories of terrestrial birds. Yet, the applicability of this equation for waterbird research has not been tested. Here, we present the dimensions of leg-loop harnesses fitted to Lesser Frigatebirds (Fregata ariel), a sexually dimorphic seabird species. For both sexes, measured harness spans were shorter than those predicted by the terrestrial bird equation. Additionally, leg-loop harnesses trialed on Brown (Sula leucogaster) and Masked (S. dactylatra) boobies were unsuitable and hence unsuccessful. Morphological and behavioral features of species suited to leg-loop harness attachment are identified.

Two methods of radio transmitter attachment and their effects on the behavior and energetics of captive long-tailed ducks (Clangula hyemalis) during winter

Attachment of external devices can have negative consequences for the health and fitness of subjects, but these effects are often overlooked. In preparation for a field study with small sea ducks, we investigated the effects of two types of external radio transmitter attachments on activity budgets and energetics of captive long-tailed ducks (Clangula hyemalis) during winter. We conducted behavioral observations on 15 ducks over 3 months and measured oxygen consumption rates while resting on water and during preening. Ducks were either sham handled (‘Control’) or had transmitters attached with subcutaneous anchors (‘Prongs’) or Tesa tape/sutures (‘Tesa’). Following transmitter attachment, the activity budgets of Prong and Tesa birds changed significantly, while Controls remained largely unchanged. Prong and Tesa birds reduced locomotor activity (−58 and −54 %, respectively) and the proportion of time spent in water (−48 and −35 %, respectively), while they concomitantly increased time allocated to maintenance behavior (+98 and +151 %, respectively). Tesa birds recovered from these changes over time, at least partially, but Prong birds did not. Also, two of the five Prong birds developed a bacterial infection that spread from the attachment site. Retention time of transmitters was significantly greater for the Prong attachments (4 of 5 tags were retained for the entire 59-day study) than the Tesa technique (26.0 ± 3.2 days). Energy metabolism of ducks resting on water did not change significantly after transmitter attachment. Preening, the primary maintenance behavior, increased oxygen consumption rates by ~70 % over resting. The greater allocation of time to maintenance behavior after transmitter attachment most likely increased daily energy expenditure in these ducks, although the concurrent reduction in locomotor activity might have mitigated this effect. Ducks in our study had food ad libitum and were able to reduce locomotion after transmitter attachment without compromising food intake and, hence, energy balance. In the wild, this strategy might not be viable. Given the short retention time, the tape-based attachment technique we applied is not suitable if monitoring periods greater than ~2 to 3 weeks are desired. Both methods resulted in significant behavioral changes with energetic consequences that should be considered when planning to attach external transmitters to small sea ducks in the wild.

SDN‐based 5G mobile networks: architecture, functions, procedures and backward compatibility

ABSTRACTIn this paper, we describe an SDN‐based plastic architecture for 5G networks, designed to fulfill functional and performance requirements of new generation services and devices. The 5G logical architecture is presented in detail, and key procedures for dynamic control plane instantiation, device attachment, and service request and mobility management are specified. Key feature of the proposed architecture is flexibility, needed to support efficiently a heterogeneous set of services, including Machine Type Communication, Vehicle to X and Internet of Things traffic. These applications are imposing challenging targets, in terms of end‐to‐end latency, dependability, reliability and scalability. Additionally, backward compatibility with legacy systems is guaranteed by the proposed solution, and Control Plane and Data Plane are fully decoupled. The three levels of unified signaling unify Access, Non‐access and Management strata, and a clean‐slate forwarding layer, designed according to the software defined networking principle, replaces tunneling protocols for carrier grade mobility. Copyright © 2014 John Wiley &amp; Sons, Ltd.

Abstract 9480: Persistent MR Reduction With Stabilization of LV Remodeling and Following Chronic Polymer-Mesh Device on Infarcted Myocardium in a Chronic Ischemic MR Model

Background: Mitral valve repair with ring annuloplasty for ischemic mitral regurgitation (IMR) is associated with significant recurrent IMR due to continued left ventricular (LV) remodeling as it does not directly address LV and mitral valve tethering. We aimed to assess chronic implantation of novel polymer based mesh device to reduce IMR reduction and reverse LV remodeling. Methods: Five Dorset sheep underwent ligation of second and third circumflex obtuse marginal branches to produce chronic IMR after 8 weeks. Poly-mesh was attached to the infarcted myocardium underlying the papillary muscle with a further 8 weeks follow-up. In addition, chronic IMR was produced in 5 untreated control sheep. IMR severity was assessed by 2D vena contracta width (VCW) and 3D vena contracta area (VCA). LV end-diastolic volume (EDV), end-systolic volume (ESV), ejection fraction (EF) by 2D echo and hemodynamic data were also obtained at each baseline, chronic MR, and chronic poly-mesh stages. Results: In all sheep, after poly-mesh attachment, IMR decreased and this reduction persisted over 8 weeks (VCW 0.42±0.09 to 0.08±0.12cm; VCA 0.13±0.08 to 0.05±0.08cmsq, p&lt;0.01) with significant increase in Emax (1.1±0.5 to 2.9±0.7mmHg/ml, p&lt;0.05). There were no significant changes in LVEF (45.4±6.7 vs 42.6±3.5%, p=NS). Importantly, LV EDV and ESV at chronic poly-mesh stage were reduced compared to the chronic MR stage (EDV 110±15 to 88±18ml, p&lt;0.05; ESV 61±14 to 51±12ml, p=NS) and % increases of both EDV and ESV from chronic MR to chronic poly-mesh stage were significantly lower than those of untreated control sheep (%EDV change -22±11 vs 11±10%, p&lt;0.01; %ESV change -10±14 vs 9±10%, p&lt;0.05) (FIGURE). Conclusions: Chronic follow up after polymer-mesh device attachment shows the stabilization of mitral-LV complex in a chronic IMR model, causing persistent reduction of IMR and preventing continued LV remodeling.