Development Of High Performance Concrete Research Articles

Application of Polycarboxylate Superplasticizer in the Concrete

Compared with the traditional water reducer, polycarboxylicwater-reducing agent exhibits the advantages of high water-reducing rate, cement paste fluidity and low slump loss, etc. The structure of polycarboxylates water reducing agent molecular is comb type. Water reducing agent can be used in the molecular design because it has high water reducing rate, low dosage, good slump stability, and have great potential in increase strength. In recent years, it has attracted many researchers' attention. Water reducing agent can block or destroy cement granular flocculation structure, through the surface function, complexation, electrostatic repulsion force and stereo repulsive force. Research on water reducing agent based on the application of poly carboxylic acid can realize functional design of water reducing agent, so as to promote the development of high-performance concrete.

Development of High Performance Concrete using GGBS and Alccofine

Development of High Performance Concrete using GGBS and Alccofine

Mechanical Properties of Fiberous High Performance Lightweight Aggregate Concrete

Structural lightweight aggregate concrete solves weight and durability problems in buildings and structures. Recent advanced in material technology have accelerated the development of high performance concrete using lightweight aggregate. The main objective of this research is to produce high performance lightweight aggregate concrete reinforced with polypropylene and to study the mechanical properties of this type. The effect of various factors such as type of fiber and volume fraction of fibers also has been investigated. The experimental work included the use of pumice as coarse and fine lightweight aggregate, superplasticizer and silica fume to produce high performance lightweight concrete. Several trial mixes were examined to determine the proper proportion of the concrete constituent. Three types of polypropylene with different volume fraction were used. The procedure also includes studying the compressive strength, splitting tensile strength, flexural strength and static modulus of elasticity. The test results shows that the addition of all types of polypropylene fiber results in significant improvement in most mechanical properties compared with reference concrete specimens at different ages except compressive strength it was improved at Vf =0.25% and decrease at Vf =0.75%.

Effect of Pozzolanic Additives on the Strength Development of High Performance Concrete

The aim of this research is to estimate the effect of pozzolanic substitutes on the temperature generated by the hydration and on the final strength of concrete. Differential thermal analyses (DTA) were conducted. Ternary cementitious systems with different ratios of Portland cement, silica fume and calcined illite clay were investigated. The results showed that the rates of pozzolanic reaction and portlandite consumption in the silica fume-blended cement pastes are higher than in the illite clay-blended cement pastes.

Thermal and strength performance of reinforced self-compacting concrete slabs mixed with basalt and PVA fibers in high intensity fire

Fibers addition to concrete and the innovation of self-compacting concrete technology lead to the development of high-performance concrete. However, high intensity fire may adversely affect the performance of this type of concrete. A series of fire resistance test experiments to evaluate the performance of fiber reinforced self-compacting concrete (FR-SCC) slabs consisting of various mix of basalt and PVA fibers were carried out by subjecting the concrete slabs as an element of construction to high intensity Hydrocarbon fire heating condition. The fire testing condition was in accordance with the standard time-temperature fire curve for 120 minutes up to 1100°C heating temperature. The temperatures on the surface and within the concrete slabs were recorded and the performance of each type of FRSCC slabs were evaluated. The performance of Basalt FR-SCC was found to be more resistant to fire in comparison to PVA FRSCC. There residual compressive strength of core samples were tested and SEM analysis were carried out to determine the effect of high intensity fire on the basalt and PVA FR-SCC slabs.

Development and Mix Design of HPC and UHPFRC

Application of HPC (High performance concrete) is very popular and modern solution in current architecture. Higher mechanical and durability properties allow using of thin-walled cross-sections bringing savings of materials and internal space of buildings. This paper deals with development of HPC and UHPFRC (Ultra high performance fiber reinforced concrete) mix design and impact of composition to final mechanical properties. Mix design is focused first on the influence of various additives such as fly ash, silica fume and quartz flour and then to different dosage of steel fibers.

Experimental Study on Mechanical Properties of Steel Fiber Reinforced High Performance Concrete

A large number of experiments have been carried out in this study to reveal the effect of the steel fiber dosage on the mechanical properties of HPC (high performance concrete). The mechanical property includes compressive strength, elastic modulus and flexural strength. The results indicate that the addition of steel fiber increase the compressive strength, elastic modulus and flexural strength of HPC. When the steel fiber dosage is less than 2%, these mechanical property parameters are increasing gradually with the increase of steel fiber dosage, while these parameters begin to decrease when the steel fiber dosage is more than 2%. With the development of HPC, the application of steel fibers in HPC becomes more and more popular. In the actual construction of steel fiber reinforced HPC, the dosage of steel fiber should be controlled strictly in order to ensure that the steel fibers can perform their best improvement on high performance concrete.

Efecto de la adición mineral cal- zeolita sobre la resistencia a la compresión y la durabilidad de un hormigón

The international construction practice reports a remarkable use and development of high performance concretes, with excellent results in the durability properties, associated with a very dense cement matrix, defined from the use of high volumes of very fine minerals additions, such as, fly ash, silica fume, metakaolin and other fine powders. For the developing countries, among others Cuba, the use of these pozzolanic additions are relatively expensive, given for the high import prices of these pozzolanic materials, thus, the utility of using the national available pozzolanic sources with proven reactivity, as a partial substitute of the Ordinary Portland Cement (OPC) contents in the concrete mixtures without its properties are affected. The present paper shows the results of the study on the influence of substitution level of Ordinary Portland Cement contents by lime – pozzolan binder in combination with chemical admixture, in the behavior of the compression strength and the durability properties of a concrete. Several levels of OPC substitution are evaluated, using zeolite as pozzolan. The results obtained prove the possibility to carry out the partial replacement of high volumes of OPC by lime – zeolite binder, without affecting the values of compression strength required and their behavior before action of the chloride ion penetration and the carbonation.

Characteristics of high performance reinforced concrete barriers that resist non-deforming projectile impact

Current research and development of high performance concrete, together with study of phenomena that are pertinent to impact resistance, have lead to a new generation of barriers with improved properties to resist impact loads. The paper reviews major properties and mechanisms that affect impact resistance of concrete barriers as per criteria that characterize the resistance. These criteria are the perforation limit, penetration depth and the amount of front and rear face damage. From the long-known, single strength parameter that used to represent the barriers' impact resistance, more of the concrete mix ingredients are now considered to be effective in determining it. It is shown that the size and hardness of the aggregates, use of steel fibers and micro-silica have different effects on performance under impact and on the resistance. Additional pertinent phenomena, such as the rate and size effects, confinement and local versus global response, are pointed out with their reference to possible future developments in the design of impact resisting concrete barriers.

Boundary Element Analysis of Multiple Scattering Waves in High Performance Concretes

Advances in computing have allowed for the development of high performance concretes mathematically. We develop a method which combines the generalized self consistent model together with the boundary element method and the statistical averaging procedure to study the multiple scattering of plane elastic waves in concrete containing randomly distributed parallel fibers. In analysis, the concrete matrix is modeled by dispersed aggregate structure. The physical properties for a fiber-reinforced concrete are obtained numerically and shown in graphs for various microstructures at designated frequencies.

Effect of fly ash and slag on the fracture characteristics of high performance concrete

The premature deterioration of concrete structures in aggressive environments has necessitated the development of high performance concrete (HPC). The major difference between conventional concrete and HPC is essentially the use of chemical and mineral admixtures. The improved pore structure of HPC achieved by the use of chemical and mineral admixtures causes densification of paste-aggregate transition zone, which in turn affects the fracture characteristics. Hence, studies were taken up to investigate the effect of fly ash and slag on the fracture characteristics of HPC. Beam specimens (geometrically similar and single size variable notch) with locally available fly ash (25%) and slag (50%) as cement replacement materials were prepared and tested in a servo-controlled Universal Testing Machine (UTM) under displacement control. From the value of the peak load for each beam, various fracture parameters were calculated. The results show that there is a reduction in the fracture energy due to addition of fly ash or slag, which can be attributed to the presence of unhydrated particles of size larger than that of normal flaws in concrete. Also due to densification, the post peak behaviour is steeper for the fly ash or slag based HPC mixes. The results of the investigation are presented in this paper.

Application of High-Performance Concrete to High-Rise Building in Taiwan

The research and development of high-performance concrete (HPC) that can give both high flow characteristics and high strength have attracted wide interest in Taiwan. The construction of the 101-storey Taipei Financial Center and the 85-storey Tungtxt & Chingtai (T&C) Tower requires the slump to be in the range of 230 – 270 mm, the initial slump flow in the range of 580 – 620 mm and slump more than 230 mm after 45 minutes, as well as a 56-day compressive strength of over 56 MPa. The HPC mix is designed using a densified mixture design algorithm which aims to achieve the lowest cement content. With the addition of pozzolanic materials such as fly ash, the workability is much improved because the shape of fly ash is spherical. After one-year of strict quality control, the HPC achieve consistent workability and excellent strength. This indicates that the appropriate use of local industrial by-product materials can produce HPC of the required design strength.

Development of high performance concrete using silica fume at relatively high water–binder ratios

The aim of this study was to investigate the possibility of developing high performance concrete (HPC) using silica fume (SF) at relatively high water–binder ratios. For this purpose, water–binder ratios of 0.45 and 0.50 were considered. Test specimens were air and water cured and exposed to a medium temperature range of 20°C to 50°C. The compressive strength, modulus of elasticity and initial surface absorption (ISA) of hardened concrete were determined in the laboratory. Test results indicated that concrete under water curing offers the best results. The highest level of compressive strength and modulus of elasticity and the lowest level of ISA were produced by SF concrete under water curing and at temperature of 35°C. Data collected also revealed that, under controlled curing conditions, it is possible to produce HPC at relatively high water–binder ratios.