Amplification Detection Research Articles

The clinical utility of a circulating tumor cell based cerebrospinal fluid assay in the diagnosis and molecular analysis of leptomeningeal disease in patients with metastatic non-small cell lung cancer.

8644 Background: Leptomeningeal disease (LMD) is associated with significant morbidity and mortality for metastatic non-small cell lung cancer (mNSCLC). The standard of care for diagnosing LMD remains magnetic resonance imaging (MRI) and cerebrospinal fluid (CSF) cytology, but these have limited sensitivity. CSF-based liquid biopsy is an emerging strategy for dynamic assessments of CSF-derived tumor cells to monitor intracranial responses and CNS clonal evolution during treatment and at progression. However, data for the feasibility and utility of this approach is limited. We describe our clinical experience to evaluate the use of molecular analysis on CSF-derived circulating tumor cells (CTCs) for mNSCLC. Methods: Patients with mNSCLC who had a lumbar puncture for CSF collection as part of routine clinical care to rule out LMD were included in the study. CSF was evaluated for CTCs and cell-free DNA (cfDNA) with a commercially available assay (CNSide) and subsequent molecular profiling was performed to detect actionable mutations. Patients were analyzed for LMD with CSF cytology and MRI imaging. Molecular testing results from sequencing of tumor tissue and plasma cell tumor DNA were available for all patients. Other than copy number amplification detection for MET, the CSF assay allowed for analysis of MET and HER2 expression via fluorescent in situ hybridization (FISH). Results: The study included 22 patients with mNSCLC (77% female; median age 60 years; 95% adenocarcinoma). Sensitizing EGFR mutations were found in 78% of patients and 18% had an atypical EGFR mutation at initial diagnosis. LMD was diagnosed using the CSF CTC assay in thirteen of the 22 patients (59%) patients. CSF cytology was negative for LMD in five of 13 cases (38%) and furthermore, 2 of these cases (15%) had normal MRI brain imaging. There were sufficient CTCs to perform molecular profiling on seven of the 13 patients (54%). The concordance with tissue NGS was 100% and the driver mutation was identified in all 7 patients with the CSF CTC assay. MET expression and HER2 expression via FISH were noted in 11 patients (50%) and 4 patients (18%) respectively. Conclusions: In this single institution study, we detected a higher sensitivity to diagnose LMD with CNSide. This CSF assay identified 38% of LMD cases which were missed by standard CSF cytology and of note, 15% of the cases found with LMD were missed by both CSF cytology and MRI. In addition, CSF molecular testing using this assay demonstrated high concordance with tissue-based molecular testing. The study illustrates that multigene molecular analysis of CSF CTCs can be a useful tool for diagnosis, monitoring of response to therapy, as well as for the identification of therapeutic targets specific to the CSF especially for patients with oncogene-driven mNSCLC.

Double domain fusion improves the reverse transcriptase activity and inhibitor tolerance of Bst DNA polymerase

To enhance the DNA/RNA amplification efficiency and inhibitor tolerance of Bst DNA polymerase, four chimeric Bst DNA polymerase by fusing with a DNA-binding protein Sto7d and/or a highly hydrophobic protein Hp47 to Bst DNA polymerase large fragment. One of chimeric protein HpStBL exhibited highest inhibitor tolerance, which retained high active under 0.1 U/μL sodium heparin, 0.8 ng/μL humic acid, 2.5× SYBR Green I, 8 % (v/v) whole blood, 20 % (v/v) tissue, and 2.5 % (v/v) stool. Meanwhile, HpStBL showed highest sensitivity (93.75 %) to crude whole blood infected with the African swine fever virus. Moreover, HpStBL showed excellent reverse transcriptase activity in reverse transcription loop-mediated isothermal amplification, which could successfully detect 0.5 pg/μL severe acute respiratory syndrome coronavirus 2 RNA in the presence of 1 % (v/v) stools. The fusion of two domains with different functions to Bst DNA polymerase would be an effective strategy to improve Bst DNA polymerase performance in direct loop-mediated isothermal amplification and reverse transcription loop-mediated isothermal amplification detection, and HpStBL would be a promising DNA polymerase for direct African swine fever virus/severe acute respiratory syndrome coronavirus 2 detection due to simultaneously increased inhibitor tolerance and reverse transcriptase activity.

A target-triggered strand displacement-assisted target recycling based on carbon dots-based fluorescent probe and MSNs@PDA nanoparticles for miRNA amplified detection and fluorescence imaging.

A target-triggered strand displacement-assisted target recycling based on carbon dots-based fluorescent probe and mesoporous silica nanoparticles@polydopamine (MSNs@PDA) was established to detect miRNA. The surface of MSNs rich in mesopores was coated with a layer of PDA, which can adsorb and quench the fluorescence of single-stranded Fuel DNA with fluorescent carbon dots (CDs) modified at the end through fluorescence resonance energy transfer (FRET). After adding double-stranded DNA-gold nanoparticles (dsDNA-AuNPs) and target let-7a, it will trigger two toehold-mediated strand displacement reactions (TSDR), leading to the recovery of fluorescence and the recycling of target let-7a (excitation wavelength: 380nm; emission wavelength: 458nm). The recovery value of fluorescence is proportional to the logarithm of the target microRNA let-7a concentration, thus realizing the sensitivity amplification detection of disease markers. The MSNs@PDA@Fuel DNA-CDs/dsDNA-AuNPs nanoplatform based on the strategy of "on-off-on" and TSDR cyclic amplification may hold great potential as an effective and safe nanoprobe for accurate fluorescence imaging of diseases related to miRNA with low abundances.

A Dual and Rapid RPA-CRISPR/Cas12a Method for Simultaneous Detection of Cattle and Soybean-Derived Adulteration in Goat Milk Powder.

The adulteration of goat milk powder occurs frequently; cattle-derived and soybean-derived ingredients are common adulterants in goat milk powder. However, simultaneously and rapidly detecting cattle-derived and soybean-derived components is still a challenge. An efficient, high-throughput screening method for adulteration detection is needed. In this study, a rapid method was developed to detect the adulteration of common cattle-derived and soybean-derived components simultaneously in goat milk powder by combining the CRISPR/Cas12a system with recombinant polymerase amplification (RPA). A dual DNA extraction method was employed. Primers and crRNA for dual detection were designed and screened, and a series of condition optimizations were carried out in this experiment. The optimized assay rapidly detected cattle-derived and soybean-derived components in 40 min. The detection limits of both cattle-derived and soybean-derived components were 1% (w/w) for the mixed adulteration models. The established method was applied to a blind survey of 55 commercially available goat milk powder products. The results revealed that 36.36% of the samples contained cattle-derived or soybean-derived ingredients, which revealed the noticeable adulteration situation in the goat milk powder market. This study realized a fast flow of dual extraction, dual amplification, and dual detection of cattle-derived and soybean-derived components in goat milk powder for the first time. The method developed can be used for high-throughput and high-efficiency on-site primary screening of goat milk powder adulterants, and provides a technical reference for combating food adulteration.

A new simplified sequence-dependent loop-mediated isothermal amplification (LAMP) detection method.

Fluorescence dye-based loop-mediated isothermal amplification (LAMP) is a sensitive nucleic acid detectionmethod, but is limited to single-plex detection and may yield non-specific signals. In this study, we propose a bifunctional probe-based real-time LAMP amplification method for single-plexed or multiplexed detection. The bifunctional probe is derived by modifying the5' endof the fluorophore and an internal quencher on one of the LAMP primers; therefore, it can simultaneously be involved in the LAMP process and signal amplification. The fluorescence intensity undergoes a cumulative exponential increase during the incorporation of the bifunctional probe into double-stranded DNA amplicons. The bifunctional probe-based LAMP method is simplified and cost-effective, as the primer design and experimental operations align entirely with the ordinary LAMP. Different from other current probe-based methods, this method does not require additional enzymes, sequences, or special probe structures. Also, it is 10min faster than several otherprobe-based LAMP methods. The bifunctional probe-based LAMP method allows the simultaneous detection of the target Vibrio parahaemolyticus DNA and the internal amplification control in a one-pot reaction, demonstrating its potential for multiplexed detection.

A Portable, Integrated, Sample-In Result-Out Nucleic Acid Diagnostic Device for Rapid and Sensitive Chikungunya Virus Detection.

Chikungunya virus, a mosquito-borne virus that causes epidemics, is often misdiagnosed due to symptom similarities with other arboviruses. Here, a portable and integrated nucleic acid-based diagnostic device, which combines reverse transcription-loop-mediated isothermal amplification and lateral-flow detection, was developed. The device is simple to use, precise, equipment-free, and highly sensitive, enabling rapid chikungunya virus identification. The result can be obtained by the naked eye within 40 min. The assay can effectively distinguish chikungunya virus from dengue virus, Japanese encephalitis virus, Zika virus, and yellow fever virus with high specificity and sensitivity as low as 598.46 copies mL-1. It has many benefits for the community screening and monitoring of chikungunya virus in resource-limited areas because of its effectiveness and simplicity. The platform has great potential for the rapid nucleic acid detection of other viruses.

Phage-based magnetic capture method as an aid for real-time recombinase polymerase amplification detection of Salmonella spp. in milk

Salmonella is a major cause of foodborne diseases worldwide. Conventional rapid assays for detecting Salmonella in real samples often encounter severe matrix interference or detect a limited number of species of a genus, resulting in inaccurate detection. In this study, we developed a method that combined phage-based magnetic capture with real-time recombinase polymerase amplification (RPA) for the rapid, highly sensitive, and specific detection of Salmonella in milk with an ultra-low detection limit. The Felix O-1 phage-conjugated magnetic beads (O-1 pMBs) synthesized in this method showed excellent capture ability for Salmonella spp. and ideal specificity for non-Salmonella strains. After O-1 pMBs-based magnetic separation, the limit of detection of the real-time RPA assay was 50 cfu/mL in milk samples, which was significantly increased by a magnitude of 3 to 4 orders. The method exhibited a high sensitivity (compatibility) of 100% (14/14) for all tested Salmonella serotype strains and an ideal specificity (exclusivity) of 100% (7/7) for the tested non-Salmonella strains. The entire detection process, including Salmonella capture, DNA extraction, and real-time RPA detection, was completed within 1.5 h. Furthermore, milk samples spiked with 10 cfu/25 mL of Salmonella were detected positive after being cultured in buffered peptone water for only 3 h. Therefore, the proposed method could be an alternative for the rapid and accurate detection of Salmonella.

Value of peripheral blood rare cell EGFR gene amplification detection in the evaluation of benign and malignant pulmonary nodules

Objective: To explore the value of detection of epidermal growth factor receptor (EGFR) gene amplification in peripheral blood rare cells in the assessment of benign and malignant pulmonary nodules. Methods: A total of 262 patients with pulmonary nodules were selected as the retrospectively study subjects from the Second Affiliated Hospital of Army Military Medical University and Peking Union Medical College Hospital from July 2022 to August 2023. There were 98 males and 164 females, with the age range from 16 to 79 (52.1±12.1) years. The EGFR gene amplification testing was performed on the rare cells enriched from patients' peripheral blood, and the clinical manifestations, CT imaging features, histopathological and/or pathological cytological confirmed results of patients were collected. The receiver operating characteristic (ROC) curve was used to determine the optimal cut-off value of the method of detection of EGFR gene amplification in peripheral blood rare cells, and its diagnostic efficacy was evaluated. Results: Among the 262 patients, 143 were malignant pulmonary nodules and 119 were benign pulmonary nodules. The differences between malignant pulmonary nodules and benign pulmonary nodules in nodule diameter and nodule density were statistically significant (both P<0.001), while the differences in age, gender and nodule number were not statistically significant (all P>0.05). The number [M (Q1, Q3)] of EGFR gene amplification positive rare cells in patients with malignant pulmonary nodule was 8 (6, 11), which was higher than that in patients with benign pulmonary nodule [2 (1, 4), P<0.001]. The ROC curve results showed that when the optimal cut-off value was 5 (that was, the number of EGFR gene amplification positive rare cells was>5), the area under the curve (AUC) of the detection of EGFR gene amplification in peripheral blood rare cells for discrimination of benign and malignant pulmonary lesions was 0.816 (95%CI: 0.761-0.870), with a sensitivity of 83.2%, a specificity of 80.7%, and an accuracy of 82.1%. Based on the analysis of the diameter of the nodules, the AUC for distinguishing between benign and malignant pulmonary nodules with diameter 5-9 mm and 10-30 mm was 0.797 (95%CI: 0.707-0.887) and 0.809 (95%CI: 0.669-0.949), respectively, with sensitivity, specificity and accuracy reached 75% or above. Based on the analysis of nodule density, the AUC for distinguishing between benign and malignant solid nodule and subsolid nodule was 0.845 (95%CI: 0.751-0.939) and 0.790 (95%CI: 0.701-0.880), respectively, with sensitivity, specificity and accuracy reached 75% or above. Based on the analysis of nodule number, the AUC for distinguishing between benign and malignant solitary pulmonary nodule and multiple pulmonary nodule was 0.830 (95%CI: 0.696-0.965) and 0.817 (95%CI: 0.758-0.877), respectively, with sensitivity, specificity and accuracy reached 80% or above. Conclusion: The detection of EGFR gene amplification in peripheral blood rare cells contributes to the evaluation of benign and malignant pulmonary nodules, and can be used in the auxiliary diagnosis of benign and malignant pulmonary nodules.

Rapid and highly sensitive colorimetric LAMP assay and integrated device for visual detection of monkeypox virus

BackgroundThe monkeypox virus (MPXV) is a linear double-stranded DNA virus with a large genome that causes tens of thousands of infections and hundreds of deaths in at least 40 countries and regions worldwide. Therefore, timely and accurate diagnostic testing could be an important measure to prevent the ongoing spread of MPXV and widespread epidemics. ResultsHere, we designed multiple sets of primers for the target region of MPXV for loop-mediated isothermal amplification (LAMP) detection and identified the optimal primer set. Then, the specificity in fluorescent LAMP detection was verified using the plasmids containing the target gene, pseudovirus and other DNA/RNA viruses. We also evaluated the sensitivity of the colorimetric LAMP detection system using the plasmid and pseudovirus samples, respectively. Besides, we used monkeypox pseudovirus to simulate real samples for detection. Subsequent to the establishment and introduction of a magnetic beads (MBs)-based nucleic acid extraction technique, an integrated device was developed, characterized by rapidity, high sensitivity, and remarkable specificity. This portable system demonstrated a visual detection limit of 137 copies/mL, achieving sample-to-answer detection within 1 h. SignificanceThe device has the advantages of integration, simplicity, miniaturization, and visualization, which help promote the realization of accurate, rapid, portable, and low-cost testing. Meanwhile, this platform could facilitate efficient, cost-effective and easy-operable point-of-care testing (POCT) in diverse resource-limited settings in addition to the laboratory.

Development of advanced control material for reverse transcription-mediated bacterial nucleic acid amplification tests.

Detection of bacterial RNA by nucleic acid amplification tests (NAATs), such as reverse transcription PCR (RT-PCR) and reverse transcription loop-mediated isothermal amplification (RT-LAMP), offers distinct advantages over DNA-based methods. However, such assays also present challenges in ascertaining positive and internal control material that can reliably monitor success over all phases of testing (bacterial lysis, nucleic acid recovery, reverse transcription, amplification, and signal detection): since they are unable to distinguish between amplification of bacterial RNA transcripts and the DNA templates that encode them, using intact organisms as controls can inform cell lysis but not successful detection of RNA. We developed a control strategy for RNA-based bacterial NAATs that allows ready discrimination of RNA from DNA templates using self-splicing bacterial introns, such that those nucleic acids ultimately encode different sequences. We engineered two vectors encoding synthetic transgenes based on this principle, one that is active in the Gram-negative bacterium Escherichia coli and one that functions in both E. coli and the Gram-positive organism Staphylococcus aureus. We subsequently designed RT-LAMP assays that either target RNA and DNA from transgenic organisms or target RNA exclusively and demonstrated the specificity of amplification using purified nucleic acids. Using multiplex fluorescent RT-LAMP of heat-lysed specimens, we showed the practicality of deploying such transgenic organisms as an internal control to ascertain sample integrity and assay performance during clinical diagnostic testing. Our approach has broad utility for RNA-based bacterial NAATs, especially point-of-care assays and other applications where nucleic acids are nonspecifically liberated for testing.

Sensitive and visual detection of SARS-CoV-2 using RPA-Cas12a one-step assay with ssDNA-modified crRNA

BackgroundCRISPR-Cas12a based one-step assays are widely used for nucleic acid detection, particularly for pathogen detection. However, the detection capability of the one-step assay is reduced because the Cas12a protein competes with the isothermal amplification enzymes for the target DNA and cleaves it. Therefore, the key to improving the sensitivity of the one-step assay is to address the imbalance between isothermal amplification and CRISPR detection. In previous study, we developed a Cas12a one-step assay using single-stranded DNA (ssDNA)-modified crRNA (mD-crRNA) and applied this method for the detection of pathogenic DNA. ResultsHere, we utilized mD-crRNA to establish a sensitive one-step assay that enables the visual detection of SARS-CoV-2 under ultraviolet light, achieving a detection limit of 5 aM without cross-reactivity. The sensitivity of mD-crRNA in the one-step assay was 100-fold higher than that of wild-type crRNA. Mechanistic studies revealed that the addition of ssDNA at the 3′ end of mD-crRNA attenuates the binding affinity between the Cas12a-mD-crRNA complex and the target DNA. Consequently, this reduction in binding affinity decreases the cis-cleavage activity of Cas12a, mitigating its cleavage of the target DNA in the one-step assay. As a result, there is an augmentation in the amplification and accumulation of target DNA, thereby enhancing detection sensitivity. In the clinical testing of 40 SARS-CoV-2 RNA samples, the concordance between the results of the one-step assay and known qPCR results was 97.5 %. SignificanceThe one-step assay using mD-crRNA proves to be highly sensitive and specificity and visually effective for the detection of SARS-CoV-2. Our study delves into the application of the mD-crRNA-mediated one-step assay in nucleic acid detection and its associated reaction mechanism. This holds great significance in addressing the inherent incompatibility issues between isothermal amplification and CRISPR detection.

Detection of sgRNA via SHERLOCK as Potential CRISPR Related Gene Doping Control Strategy.

Apprehensions about gene doping have grown consistently due to advancements in gene engineering techniques, particularly with the emergence of clustered regularly interspaced short palindromic repeats/CRISPR-associated (CRISPR/Cas)-based tools. These tools not only provide unprecedented possibilities for illicit performance enhancement by athletes but also offer new avenues for the detection of gene doping through biosensing of nucleic acids. Hence, pursuing on a previous study, an analytical method based on reverse transcriptase-recombinase polymerase amplification (RT-RPA) and subsequent qualitative nucleic acid detection by means of Specific High Sensitive Enzymatic Reporter UnLOCKing (SHERLOCK) was optimized for the direct detection of sgRNA associated with Streptococcus pyogenes in serum. Detection device, assay parameters, and sample handling were adjusted, to overcome previously determined assay limitations. The conducted method characterization confirmed the methods' specificity and increased detection sensitivity from 100 pM to 1 fM sgRNA in 100 μL of serum. Furthermore, reanalysis of in vivo mouse administration samples collected in a previous proof-of-concept study was conducted with successful identification of sgRNA in all anticipated postadministration samples within the 24-h collection period. Those findings support the applicability of the refined analytical procedure for the detection of illegal doping attempts via ribonucleoprotein-based CRISPR/Cas application through sgRNA identification, offering a new potential doping control strategy for CRISPR related gene doping.

Design and Analysis of Micro Signal Detection Circuit for Magnetic Field Detection Utilizing Coil Sensors

Eddy current inspection has been extensively employed in non-destructive testing of various conductive materials. The coil probe, as a mainstream sensor in the eddy current detection system, inevitably encounters interference from external signals while transmitting its own signal. Therefore, developing techniques to extract valuable signals from noisy ones is crucial for ensuring accurate detection. Carbon fiber composites not only possess significantly lower electrical conductivity compared to conventional metallic materials but also exhibit notable anisotropy. To address this issue, we designed an ‘8’ coil probe set where the excitation coil does not electromagnetically interfere with the detection coil. However, practical applications that require portability and miniaturization pose challenges when utilizing this coil probe set to identify carbon content or defects due to the typically weak output signal. To address this issue, this paper proposes a design that combines the ‘8’ structure of the planar coil probe with the principle of phase-locked amplification to create a dual-phase sensitive phase-locked amplification detection circuit. These specific design ideas were tested using a weak signal, which passed through the preamplifier, secondary amplifier, and band-pass filter comprising the target channel for signal amplification and noise filtering. The effective signal amplitude is proportional to the inverse phase difference between the direct current (DC) signal and inversely proportional to the amplitude of the signal. Finally, the DC signal was passed through an analog-to-digital converter (ADC). The analog-to-digital converter (A/D) is used to collect and calculate the DC signal, enabling the detection of weak electrical signals. Simulation experiments demonstrated that the signal detection circuit has an amplitude error below 0.2% and a phase error below 0.5%. The phase-locked amplification circuit designed in this paper can effectively extract the tiny impedance change signals of the planar coil sensor probe with high sensitivity and good robustness.

Precision miRNA profiling: Electrochemiluminescence powered by CRISPR-Cas13a and hybridization chain reaction

The article details a groundbreaking platform for detecting microRNAs (miRNAs), crucial biomolecules involved in gene regulation and linked to various diseases. This innovative platform combines the CRISPR-Cas13a system's precise ability to specifically target and cleave RNA molecules with the amplification capabilities of the hybridization chain reaction (HCR). HCR aids in signal enhancement by creating branched DNA structures. Additionally, the platform employs electrochemiluminescence (ECL) for detection, noted for its high sensitivity and low background noise, making it particularly effective. A key application of this technology is in the detection of miR-17, a biomarker associated with multiple cancer types. It exhibits remarkable detection capabilities, characterized by low detection limits (14.38 aM) and high specificity. Furthermore, the platform's ability to distinguish between similar miRNA sequences and accurately quantify miR-17 in cell lysates underscores its significant potential in clinical and biomedical fields. This combination of precise targeting, signal amplification, and sensitive detection positions the platform as a powerful tool for miRNA analysis in medical diagnostics and research.

Microsphere-Enhanced Fluorescence-Lightened Solid-Phase Hybridization Assay: The Strategy to Highly Selective Detection of Micro Ribonucleic Acids.

The detection of low-abundance microribonucleic acid (miRNA) frequently adopted nucleic acid sequence-based amplification detection, which was found to have poor selectivity for the nonspecific amplification of template-dependent ligation in enzyme-mediated cascade reactions. Here, a highly selective detection of miRNAs was developed that combined microsphere-enhanced fluorescence (MSEF) and solid-phase base-paired hybridization. The target miRNA could be accurately and quantitatively identified through the solid-phase hybridization assay on the surface of an optical microsphere, while the detected fluorescence signal could be physically amplified by MSEF. Hereinto, the optical microsphere acted as the fluorescence amplifier and whose surface supplied the space to carry out base-paired hybridization to recognize the target miRNA via the immobilized capture DNA sequence. The detected fluorescence signal of the single-base mismatched miRNA-21 sequence was just around 12% of that of the target miRNA-21 sequence in the measurement of model miRNA-21, while the limit of detection of miRNA-21 could be 1.0 fM. The developed detection of miRNA on an optical microsphere was demonstrated to be an excellent physically amplified method to selectively and sensitively detect the target miRNA and magnificently avoid the nonspecific amplification and false-positive results, which is expected to have wide applications in pathematology, pharmacology, clinic diagnosis, and on-site screening fields as well.

Palm-Sized Lab-In-A-Magnetofluidic Tube Platform for Rapid and Sensitive Virus Detection.

Simple, sensitive, and accurate molecular diagnostics are critical for preventing rapid spread of infection and initiating early treatment of diseases. However, current molecular detection methods typically rely on extensive nucleic acid sample preparation and expensive instrumentation. Here, a simple, fully integrated, lab-in-a-magnetofluidic tube (LIAMT) platform is presented for "sample-to-result" molecular detection of virus. By leveraging magnetofluidic transport of micro/nano magnetic beads, the LIAMT device integrates viral lysis, nucleic acid extraction, isothermal amplification, and CRISPR detection within a single engineered microcentrifuge tube. To enable point-of-care molecular diagnostics, a palm-sized processor is developed for magnetofluidic separation, nucleic acid amplification, and visual fluorescence detection. The LIAMT platform is applied to detect SARS-CoV-2 and HIV viruses, achieving a detection sensitivity of 73.4 and 63.9 copiesµL-1, respectively. Its clinical utility is further demonstrated by detecting SARS-CoV-2 and HIV in clinical samples. This simple, affordable, and portable LIAMT platform holds promise for rapid and sensitive molecular diagnostics of infectious diseases at the point-of-care.

Development of a Rapid Detection Method to Prorocentrum lima by Loop-Mediated Isothermal Amplification with Hydroxy Naphthol Blue.

Prorocentrum lima, a widely distributed dinoflagellate known for its production of harmful biotoxins, poses a significant threat to humans, aquaculture, and marine ecosystems. As a result, the detection of this toxic alga in coastal waters has become an urgent research focus. In this study, a rapid, sensitive, and cost-effective detection method based on loop-mediated isothermal amplification (LAMP) was developed to identify P. lima. In this method, cell extracts of P. lima were diluted and used directly as templates for amplification, eliminating the need for nucleic acid purification and simplifying the detection process. Hydroxy naphthol blue (HNB) was incorporated into the reaction mix to facilitate result interpretation, enabling visual determination of the amplification outcome with the naked eye. The entire detection process, from DNA extraction to template amplification and product detection, could be completed within 80min using a simple constant temperature-control device. This LAMP-based detection method demonstrated excellent reliability, specificity, and a low detection limit of 5.87 cells/mL for DNA crude extract. The assay offered an efficient alternative to PCR for rapid detection of P. lima. By streamlining the detection process and offering a visual readout, this technique holds promise for efficient and routine monitoring of harmful algal species, benefitting both research efforts and environmental management strategies.

Comparison of targeted next-generation sequencing and the Xpert MTB/RIF assay for detection of Mycobacterium tuberculosis in clinical isolates and sputum specimens.

Targeted next-generation sequencing (tNGS) can be used to perform Mycobacterium tuberculosis (MTB) complex-specific amplification or target capture directly from sputum samples, yielding simultaneous coverage of many genes and DNA regions associated with antimicrobial resistance (AMR). Performance comparisons of tNGS and another molecular testing tool, Xpert MTB/rifampicin (RIF), have been empirical. Here, using a dilution series of a RIF-resistant clinical isolate of MTB, we found that tNGS had a slightly lower limit of bacterial detection (102 CFU/mL) compared with Xpert MTB/RIF (103 CFU/mL) in culture medium. However, the minimum detection limit of the rpoB S450L mutation in this isolate was significantly lower with tNGS (102 CFU/mL) than with Xpert MTB/RIF (106 CFU/mL). Sputum samples collected from 129 suspected pulmonary tuberculosis patients were also prospectively studied with the clinical diagnosis as a reference, revealing that the sensitivity of tNGS (48.6%) was higher than those of culture (46.8%), Xpert MTB/RIF (39.4%), and smear microscopy (34.9%) testing. Notably, AMR analysis of 56 MTB-positive samples as determined by tNGS revealed high mutation frequencies of 96.4%, 35.7%, 26.8%, and 19.6% in the following AMR-associated genes: rrs, rpoB, katG, and pncA, respectively. The findings of this study provide theoretical support for the differential clinical application of tNGS and Xpert MTB/RIF and suggest that tNGS has greater application value in tuberculosis drug resistance monitoring and prevention.IMPORTANCETargeted next-generation sequencing (tNGS) can be used to perform Mycobacterium tuberculosis (MTB) complex-specific amplification or target capture directly from sputum samples, yielding simultaneous coverage of genes and DNA regions associated with antimicrobial resistance (AMR). Performance comparisons of tNGS and Xpert MTB/rifampicin (RIF) have been empirical. The Xpert MTB/RIF assay is a commercial system that uses the nucleic acid amplification detection method for rapid (2 hours) diagnosis of tuberculosis (TB). The cost of the tNGS and Xpert MTB/RIF assays in this study was similar, at USD 98 and USD 70-104 per sample, respectively, but the time required for tNGS (3 days) was much longer than that required for the Xpert MTB/RIF assay. However, tNGS yielded more accurate results and a larger number of AMR-associated gene mutations, which compensated for the extra time and highlighted the greater application value of tNGS in TB drug resistance monitoring and prevention.

Iso‐E‐Codelock: A Rebuilding‐free Electrochemical Chip with a Customizable Decoding Probe for Real‐Time and Portable Pathogen Diagnostics

AbstractIn order to realize portable pathogen diagnostics with easier quantitation, digitization and integration, we develop a ready‐to‐use electrochemical sensing strategy (Iso‐E‐Codelock) for real‐time detection of isothermal nucleic acid amplification. Bridged by a branched DNA as codelock, the isothermal amplicon is transduced into increased current of an electrochemical probe, holding multiple advantages of high sensitivity, high selectivity, signal‐on response, “zero” background and one‐pot operation. Through a self‐designed portable instrument (BioAlex PHE−T), the detection can be implemented on a multichannel microchip and output real‐time amplification curves just like an expensive commercial PCR machine. The microchip is a rebuilding‐free and disposable component. The branch codelock probe can be customized for different targets and designs. Such high performance and flexibility have been demonstrated utilizing four virus (SARS‐CoV‐2, African swine fever, FluA and FluB) genes as targets, and two branch (3‐way and 4‐way) DNAs as codelock probes.

Iso-E-Codelock: A Rebuilding-free Electrochemical Chip with a Customizable Decoding Probe for Real-Time and Portable Pathogen Diagnostics.

In order to realize portable pathogen diagnostics with easier quantitation, digitization and integration, we develop a ready-to-use electrochemical sensing strategy (Iso-E-Codelock) for real-time detection of isothermal nucleic acid amplification. Bridged by a branched DNA as codelock, the isothermal amplicon is transduced into increased current of an electrochemical probe, holding multiple advantages of high sensitivity, high selectivity, signal-on response, "zero" background and one-pot operation. Through a self-designed portable instrument (BioAlex PHE-T), the detection can be implemented on a multichannel microchip and output real-time amplification curves just like an expensive commercial PCR machine. The microchip is a rebuilding-free and disposable component. The branch codelock probe can be customized for different targets and designs. Such high performance and flexibility have been demonstrated utilizing four virus (SARS-CoV-2, African swine fever, FluA and FluB) genes as targets, and two branch (3-way and 4-way) DNAs as codelock probes.