Fibril Density Research Articles

Novel cannabis flavonoid, cannflavin A displays both a hormetic and neuroprotective profile against amyloid β-mediated neurotoxicity in PC12 cells: Comparison with geranylated flavonoids, mimulone and diplacone

BackgroundFlavonoids form a diverse class of naturally occurring polyphenols ascribed various biological activities, including inhibition of amyloid β (Aβ) fibrillisation and neurotoxicity of relevance to Alzheimer’s disease. Cannabis contains a unique subset of prenylated flavonoids, the cannflavins. While selected conventional flavonoids have demonstrated anti-amyloid and neuroprotective potential, any neuroprotective bioactivity of prenylated flavonoids has not been determined. We evaluated the in vitro neuroprotective and anti-aggregative properties of the novel geranylated cannabis-derived flavonoid, cannflavin A against Aβ1–42 and compared it to two similarly geranylated flavonoids, mimulone and diplacone, to compare the bioactive properties of these unique flavonoids more broadly. MethodsNeuronal viability were assessed in PC12 cells biochemically using the MTT assay in the presence of each flavonoid (1–200 µM) for 48 h. Sub-toxic threshold test concentrations of each flavonoid were then applied to cells, alone or with concomitant incubation with the lipid peroxidant tert-butyl hyrdroperoxide (t-bhp) or amyloid β (Aβ1–42; 0–2 µM). Fluorescent staining was used to indicate effects of Aβ1–42 on PC12 cellular morphology, while direct effects of each flavonoid on Aβ fibril formation and aggregation were assessed using the Thioflavin T (ThT) fluorometric kinetic assay and transmission electron microscopy (TEM) to visualise fibril and aggregate morphology. ResultsCannflavin A demonstrated intrinsic hormetic effects on cell viability, increasing viability by 40% from 1 to 10 µM but displaying neurotoxicity at higher (>10–100 µM) concentrations. Neither mimulone nor diplacone exhibited such a biphasic effect, instead showing only concentration-dependent neurotoxicity, with diplacone the more potent (from >1 µM). However at the lower concentrations (<10 µM), cannflavin A increased cell viability by up to 40%, while 10 µM cannflavin A inhibited the neurotoxicity elicited by Aβ1–42 (0–2 µM), reducing Aβ aggregate adherence to PC-12 cells and associated neurite loss. The neuroprotective effects of cannflavin A were associated with a direct inhibition of Aβ1–42 fibril and aggregate density, evidenced by attenuated ThT fluorescence kinetics and microscopic evidence of both altered and diminished density of Aβ aggregate and fibril morphology via electron microscopy. ConclusionsThese findings highlight a concentration-dependent hormetic and neuroprotective role of cannflavin A against Aβ-mediated neurotoxicity, associated with an inhibition of Aβ fibrillisation. The efficacy of the cannabis flavone may itself direct further lead development targeting neurodegeneration in Alzheimer’s disease. However, the geranylated flavonoids generally displayed a comparatively potent neurotoxicity not observed with many conventional flavonoids in vitro.

Human Mesenchymal Stromal Cells Engineered to Express Collagen VII Can Restore Anchoring Fibrils in Recessive Dystrophic Epidermolysis Bullosa Skin Graft Chimeras

Recessive dystrophic epidermolysis bullosa (RDEB) is a debilitating genodermatosis caused by loss-of-function mutations in COL7A1 encoding type VII collagen (C7), the main component of anchoring fibrils at the dermal-epidermal junction. With no curative treatments presently available, retrovirally transduced autologous epidermal grafts and intradermal lentivirally engineered fibroblast injections are being investigated. Alternative approaches aim to infuse allogeneic mesenchymal stromal cells (MSCs) to provide a more generalized treatment for RDEB. We investigated whether healthy human MSCs could be engineered to overexpress C7 and correct RDEB in a human:murine chimeric model. Initially, engineered MSCs incorporated exvivo into RDEB grafts, their presence confirmed by fluorescence in situ hybridization, revealed recovery of function of the dermal-epidermal junction with no signs of blister formation. Importantly, the detection of anchoring fibrils by transmission electron microscopy corroborated structural recovery. Next, MSCs cotransduced to express C7 and luciferase were delivered intradermally into grafted RDEB skin, resulting in localized MSC persistence with deposition of de novo C7 at the site. Notably, C7 expression was sufficient to restore anchoring fibril density to normal levels. In contrast, intravenously injected engineered MSCs were undetectable within grafts and lacked anchoring fibril reconstitution. Our data suggest that although localized correction may be achievable using engineered MSCs, strategies for systemic administration require further modeling.

Microstructure-based numerical simulation of the mechanical behaviour of ocular tissue

This paper aims to present a novel full-eye biomechanical material model that incorporates the characteristics of ocular tissues at microstructural level, and use the model to analyse the age-related stiffening in tissue behaviour. The collagen content in ocular tissues, as obtained using X-ray scattering measurements, was represented by sets of Zernike polynomials that covered both the cornea and sclera, then used to reconstruct maps of collagen fibril magnitude and orientation on the three-dimensional geometry of the eye globe. Fine-mesh finite-element (FE) models with eye-specific geometry were built and supported by a user-defined material model (UMAT), which considered the regional variation of fibril density and orientation. The models were then used in an iterative inverse modelling study to derive the material parameters that represent the experimental behaviour of ocular tissues from donors aged between 50 and 90 years obtained in earlier ex vivo studies. Sensitivity analysis showed that reducing the number of directions that represented the anisotropy of collagen fibril orientation at each X-ray scattering measurement point from 180 to 16 would have limited and insignificant effect on the FE solution (0.08%). Inverse analysis resulted in material parameters that provided a close match with experimental intraocular pressure-deformation behaviour with a root mean square of error between 3.6% and 4.3%. The results also demonstrated a steady increase in mechanical stiffness in all ocular regions with age. A constitutive material model based on distributions of collagen fibril density and orientation has been developed to enable the accurate representation of the biomechanical behaviour of ocular tissues. The model offers a high level of control of stiffness and anisotropy across ocular globe, and therefore has the potential for use in planning surgical and medical procedures.

Analysis of X-ray scattering microstructure data for implementation in numerical simulations of ocular biomechanical behaviour.

This study aimed to analyse microstructure data on the density and orientation of collagen fibrils in whole eye globes and to propose an effective method for the preparation of data for use in numerical simulations of the eye’s biomechanical performance. Wide-angle X-ray scattering was applied to seven healthy ex-vivo human eyes. Each eye was dissected into an anterior and a posterior cup, and radial incisions were used to flatten the tissue before microstructure characterisation. A method was developed to use the microstructure data obtained for the dissected tissue to build realistic 3D maps of fibril density and orientation covering the whole eye globe. At the central cornea, 61.5±2.3% of fibrils were aligned within 45° sectors surrounding the two orthogonal directions. In contrast, more than one-third of the total fibril content was concentrated along the circumferential direction at the limbus (37.0±2.4%) and around the optic nerve head (34.8±2.1%). The insertion locations of the four recti muscles exhibited a preference in the meridional direction near the equator (38.6±3.9%). There was also a significant difference in fibril density between the limbus and other regions (ratio = 1.91±0.45, p <0.01 at the central cornea and ratio = 0.80±0.21, p <0.01 at the posterior pole). Characterisation of collagen fibril density and orientation across the whole ocular surface has been possible but required the use of a technique that involved tissue dissection and hence caused tissue damage. The method presented in this paper aimed to minimise the effect of dissection on the quality of obtained data and was successful in identifying fibril distribution trends that were compatible with earlier studies, which concentrated on localised areas of the ocular globe.

Building physiologically‐relevant models of developing cartilage

Perlecan, or heparan sulfate proteoglycan (Hspg2), is an extracellular matrix (ECM) protein localized to the pericellular matrix (PCM). When Hspg2 is knocked down, the phenotype mimics the skeletal defects observed in human Schwartz‐Jampel syndrome. We previously demonstrated, using atomic force microscopy, that perlecan knockdown significantly decreased the stiffness of the ECM and chondrocytes in developing cartilage; however, it is not clear what changes occur in ECM structure and organization to cause this decrease. To address this question, our goal is to develop computational models that incorporate geometries and material properties that will enable us to analyze the mechanical response of cells in situ. Therefore, we created 3D physiologically‐derived geometries that can generate repeatable simulations of cartilage mechanics. In parallel, we are using mass spectrometry (LC‐MS/MS) and transmission electron microscopy (TEM) to define how cartilage composition and organization changes as a function of development and perlecan knockdown.Multi‐cellular geometries from embryonic day (E)16.5 and postnatal day (P)3 murine cartilage were imaged in 3D using confocal microscopy. Image stacks were processed using MATLAB to create multicellular geometries for finite element analysis using ANSYS (Fig 1A,B). Geometries based on confocal images and isolated, single cell models were compressed 5% and cells and ECM strain were compared (Fig 1C,D). Our simulations indicated that cells had similar strains at both time points, even though cell and ECM stiffness at P3 was significantly higher than at E16.5. In addition, the ECM at P3 took on more strain than at E16.5. The isolated, single cell geometries underestimated both cell and ECM strain and were not able to capture the similarity in cell strain observed with physiologically‐derived geometries.A limitation of the current model is that cells and ECM were treated as homogenous materials, whereas native cartilage is a biphasic material comprised of type II collagen fibrils embedded in an amorphous proteoglycan matrix. To identify how ECM composition and organization changes, cartilage from distal humeri or femurs were dissected from E16.5 and P3 wildtype, heterozygous, and homozygous Hspg2 mice for analysis via LC‐MS/MS or TEM. Proteins were extracted with guanidine‐HCl and processed for LC‐MS/MS. Relative increases in the abundance of ECM and associated proteins, including collagen types II &amp; IX and aggrecan highlighted expected developmental changes between E16.5 and P3. Multiple proteins were significantly more abundant in homozygous vs. wildtype P3 mice, including collagens type II &amp; IX, fibronectin and matrilin‐3. Surprisingly, TEM studies indicate that collagen fibril density and diameter decreased between wildtype and homozygous mice, suggesting that perlecan knockdown leads to a decrease in cross‐linking and increased ECM extractability. We aim to integrate these changes in material properties with our simulations to generate a computational model that can describe and predict the mechanics of developing cartilage.Support or Funding InformationThis work was supported by the National Institutes of Health [R21 AR069248, R01 AR071359 and DP2 AT009833 to S.C.].This abstract is from the Experimental Biology 2019 Meeting. There is no full text article associated with this abstract published in The FASEB Journal.

Cryo-EM structure of cardiac amyloid fibrils from an immunoglobulin light chain AL amyloidosis patient

Systemic light chain amyloidosis (AL) is a life-threatening disease caused by aggregation and deposition of monoclonal immunoglobulin light chains (LC) in target organs. Severity of heart involvement is the most important factor determining prognosis. Here, we report the 4.0 Å resolution cryo-electron microscopy map and molecular model of amyloid fibrils extracted from the heart of an AL amyloidosis patient with severe amyloid cardiomyopathy. The helical fibrils are composed of a single protofilament, showing typical 4.9 Å stacking and cross-β architecture. Two distinct polypeptide stretches (total of 77 residues) from the LC variable domain (Vl) fit the fibril density. Despite Vl high sequence variability, residues stabilizing the fibril core are conserved through different cardiotoxic Vl, highlighting structural motifs that may be common to misfolding-prone LCs. Our data shed light on the architecture of LC amyloids, correlate amino acid sequences with fibril assembly, providing the grounds for development of innovative medicines.

Probing the importance of ECM alignment on cell migration

Screening for the influence of size, density and alignment of ECM fibrils in fibrous tissues shows that highly aligned adhesions are correlated with rapid migration.

Describing, Step by Step, the Shroud Body Image Formation

In the recent past, we introduced a natural mechanism (stochastic) in the literature to explain the image formation on the Linen of Turin by taking into account the yellowed linen fibrils distribution of the Shroud. In our opinion, a weak energy source like the thermal radiation produced by the enveloped corpse yielded on the linen a latent image, ruled by a stochastic process, and made by small bundles of yellowed fibrils. The image on the Shroud is unique and it appeared later than the blood image with its 2D and 3D characteristics. Moreover, a correlation between the density of yellowed fibrils and the cloth-body distance is present, again proving the action of a stochastic process. In this paper, we would like to discuss, step by step, the whole natural process that occurred in the formation of the Shroud body image. In every case, to confirm our hypothesis of Shroud body image formation, it is necessary to perform experimental investigations in the Forensic Medicine area.

Small molecule diketone flavorants diacetyl and 2,3-pentanedione promote neurotoxicity but inhibit amyloid β aggregation

We investigated the effects of the small molecule flavorants diacetyl, 2,3-pentanedione and acetoin on neuronal cell viability and β amyloid aggregation and morphology. Two neuroblastoma cell lines, SH-SY5Y and Neuro 2a (N2a) were exposed to diacetyl, 2,3-pentanedione and acetoin, while Thioflavin T fluorescence kinetics and transmission electron microscopy were used to assess effects on Aβ1–42 fibril and aggregate formation and morphology respectively. Diacetyl was intrinsically toxic to both SH-SY5Y and N2a cells, with time and concentration-dependent reductions in cell viability occurring over 24 h and 48 h incubation periods. 2.3-Pentanedione evoked a similar concentration-dependent loss of cell viability in N2a cells at 48 h, but exhibited lessened toxicity in SH-SY5Y cells over 24 h, and minimal loss of cell viability by 48 h. Diacetyl inhibited Aβ1–42 aggregation kinetics, reduced aggregate and fibril density and rendered Aβ1–42 into amorphous small aggregates. 2,3-Pentanedione also reduced overall aggregate formation, but to a lesser extent than diacetyl and retaining the presence of a meshwork of Aβ1–42 aggregates and fibrils. Acetoin was innocuous to neuronal cells and did not alter Aβ1–42 fibril density or morphology. These findings highlight the intrinsic neurotoxicity of small molecule diketone flavorants. While providing further insight into their molecular interactions with amyloidogenic proteins, the neurotoxicity of such flavorants is a significant finding and warrants further investigation.

Characterization of a Cell-Assembled extracellular Matrix and the effect of the devitalization process

We have previously shown that the Cell-Assembled extracellular Matrix (CAM) synthesized by normal, human, skin fibroblasts in vitro can be assembled in a completely biological vascular graft that was successfully tested in the clinic. The goal of this study was to perform a detailed analysis of the composition and the organization of this truly bio-material. In addition, we investigated whether the devitalization process (dehydration) used to store the CAM, and thus, make the material available “off-the-shelf,” could negatively affect its organization and mechanical properties. We demonstrated that neither the thickness nor the mechanical strength of CAM sheets were significantly changed by the dehydration/freezing/rehydration cycle. The identification of over 50 extracellular matrix proteins highlighted the complex composition of the CAM. Histology showed intense collagen and glycosaminoglycan staining throughout the CAM sheet. The distribution of collagen I, collagen VI, thrombospondin-1, fibronectin-1, fibrillin-1, biglycan, decorin, lumican and versican showed various patterns that were not affected by the devitalization process. Transmission electron microscopy analysis revealed that the remarkably dense collagen network was oriented in the plane of the sheet and that neither fibril density nor diameter was changed by devitalization. Second harmonic generation microscopy revealed an intricate, multi-scale, native-like collagen fiber orientation. In conclusion, this bio-material displayed many tissue-like properties that could support normal cell-ECM interactions and allow implantation without triggering degradative responses from the host's innate immune system. This is consistent with its success in vivo. In addition, the CAM can be devitalized without affecting its mechanical or unique biological architecture. Statement of SignificanceThe extracellular matrix (ECM) defines biological function and mechanical properties of tissues and organs. A number of promising tissue engineering approaches have used processed ECM from cadaver/animal tissues or cell-assembled ECM in vitro combined with scaffolds. We have shown the clinical potential of a scaffold-free approach based on an entirely biological material produced by human cells in culture without chemical processing. Here, we perform a comprehensive analysis of the properties of what can truly be called a bio-material. We also demonstrate that this material can be stored dried without losing its remarkable biological architecture.

Periostin promotes liver fibrogenesis by activating lysyl oxidase in hepatic stellate cells

Liver fibrosis arises from dysregulated wound healing due to persistent inflammatory hepatic injury. Periostin is a nonstructural extracellular matrix protein that promotes organ fibrosis in adults. Here, we sought to identify the molecular mechanisms in periostin-mediated hepatic fibrosis. Hepatic fibrosis in periostin-/- mice was attenuated as evidenced by significantly reduced collagen fibril density and liver stiffness compared with those in WT controls. A single dose of carbon tetrachloride caused similar acute liver injury in periostin-/- and WT littermates, and we did not detect significant differences in transaminases and major fibrosis-related hepatic gene expression between these two genotypes. Activated hepatic stellate cells (HSCs) are the major periostin-producing liver cell type. We found that in primary rat HSCs in vitro, periostin significantly increases the expression levels and activities of lysyl oxidase (LOX) and lysyl oxidase-like (LOXL) isoforms 1-3. Periostin also induced expression of intra- and extracellular collagen type 1 and fibronectin in HSCs. Interestingly, periostin stimulated phosphorylation of SMAD2/3, which was sustained despite short hairpin RNA-mediated knockdown of transforming growth factor β (TGFβ) receptor I and II, indicating that periostin-mediated SMAD2/3 phosphorylation is independent of TGFβ receptors. Moreover, periostin induced the phosphorylation of focal adhesion kinase (FAK) and AKT in HSCs. Notably, siRNA-mediated FAK knockdown failed to block periostin-induced SMAD2/3 phosphorylation. These results suggest that periostin promotes enhanced matrix stiffness in chronic liver disease by activating LOX and LOXL, independently of TGFβ receptors. Hence, targeting periostin may be of therapeutic benefit in combating hepatic fibrosis.

An Agent-Based Discrete Collagen Fiber Network Model of Dynamic Traction Force-Induced Remodeling.

Microstructural properties of extracellular matrix (ECM) promote cell and tissue homeostasis as well as contribute to the formation and progression of disease. In order to understand how microstructural properties influence the mechanical properties and traction force-induced remodeling of ECM, we developed an agent-based model that incorporates repetitively applied traction force within a discrete fiber network. An important difference between our model and similar finite element models is that by implementing more biologically realistic dynamic traction, we can explore a greater range of matrix remodeling. Here, we validated our model by reproducing qualitative trends observed in three sets of experimental data reported by others: tensile and shear testing of cell-free collagen gels, collagen remodeling around a single isolated cell, and collagen remodeling between pairs of cells. In response to tensile and shear strain, simulated acellular networks with straight fibrils exhibited biphasic stress-strain curves indicative of strain-stiffening. When fibril curvature was introduced, stress-strain curves shifted to the right, delaying the onset of strain-stiffening. Our data support the notion that strain-stiffening might occur as individual fibrils successively align along the axis of strain and become engaged in tension. In simulations with a single, contractile cell, peak collagen displacement occurred closest to the cell and decreased with increasing distance. In simulations with two cells, compaction of collagen between cells appeared inversely related to the initial distance between cells. These results for cell-populated collagen networks match in vitro findings. A demonstrable benefit of modeling is that it allows for further analysis not feasible with experimentation. Within two-cell simulations, strain energy within the collagen network measured from the final state was relatively uniform around the outer surface of cells separated by 250 μm, but became increasingly nonuniform as the distance between cells decreased. For cells separated by 75 and 100 μm, strain energy peaked in the direction toward the other cell in the region in which fibrils become highly aligned and reached a minimum adjacent to this region, not on the opposite side of the cell as might be expected. This pattern of strain energy was partly attributable to the pattern of collagen compaction, but was still present when mapping strain energy divided by collagen density. Findings like these are of interest because fibril alignment, density, and strain energy may each contribute to contact guidance during tissue morphogenesis.

3D collagen fibrillar microstructure guides pancreatic cancer cell phenotype and serves as a critical design parameter for phenotypic models of EMT.

Pancreatic cancer, one of the deadliest cancers, is characterized by high rates of metastasis and intense desmoplasia, both of which are associated with changes in fibrillar type I collagen composition and microstructure. Epithelial to mesenchymal transition (EMT), a critical step of metastasis, also involves a change in extracellular matrix (ECM) context as cells detach from basement membrane (BM) and engage interstitial matrix (IM). The objective of this work was to develop and apply an in-vitro three-dimensional (3D) tumor-ECM model to define how ECM composition and biophysical properties modulate pancreatic cancer EMT. Three established pancreatic ductal adenocarcinoma (PDAC) lines were embedded within 3D matrices prepared with type I collagen Oligomer (IM) at various fibril densities to control matrix stiffness or Oligomer and Matrigel combined at various ratios while maintaining constant matrix stiffness. Evaluation of cell morphology and protein expression at both the cellular- and population-levels revealed a spectrum of matrix-driven EMT phenotypes that were dependent on ECM composition and architecture as well as initial PDAC phenotype. In general, exposure to fibrillar IM was sufficient to drive EMT, with cells displaying spindle-shaped morphology and mesenchymal markers, and non-fibrillar BM promoted more epithelial behavior. When cultured within low density Oligomer, only a subpopulation of epithelial BxPC-3 cells displayed EMT while mesenchymal MiaPaCa-2 cells displayed more uniform spindle-shaped morphologies and mesenchymal marker expression. Interestingly, as IM fibril density increased, associated changes in spatial constraints and matrix stiffness resulted in all PDAC lines growing as tight clusters; however mesenchymal marker expression was maintained. Collectively, the comparison of these results to other in-vitro tumor models highlights the role of IM fibril microstructure in guiding EMT heterogeneity and showcases the potential of standardized 3D matrices such as Oligomer to serve as robust platforms for mechanistic study of metastasis and creation of predictive drug screening models.

Development and mechanical characterisation of self-compressed collagen gels

Collagen gels are considered a promising biomaterial for the manufacturing of tissue engineering scaffolds, however, their mechanical properties often need to be improved to enable them to provide enough mechanical support during the course of tissue regeneration process. In this paper, we present a simple self-compression technique for the improvement of the mechanical properties of collagen gels, identified by the fitting of bespoke biphasic finite element models. Radially-confined highly hydrated gels were allowed to self-compress for 18h, expelling fluid, and which were subsequently subjected to unconfined ramp-hold compression. Gels, initially of 0.2%, 0.3% and 0.4% (w/v) collagen and 13mm thickness, transformed to 2.9±0.2%, 3.2±0.3% and 3.6±0.1% (w/w) collagen and 0.45±0.06mm, 0.69±0.04mm and 0.99±0.07mm thickness. Young's moduli of the compressed gels did not increase with increasing collagen fibril density, whilst zero-strain hydraulic permeability significantly decreased from 51 to 21mm4/Ns. The work demonstrates that biphasic theory, applied to unconfined compression, is a highly appropriate paradigm to mechanically characterise concentrated collagen gels and that confined compression of highly hydrated gels should be further investigated to enhance gel mechanical performance.

Collagen vitrigels with low-fibril density enhance human embryonic stem cell-derived retinal pigment epithelial cell maturation.

Structural and biochemical cues of extracellular matrix can substantially influence the differentiation and maturation of cultured retinal pigment epithelial (RPE) cells. In this study, thin collagen vitrigels were engineered to create collagen nanofibrillar structures of different fibril densities in an effort to evaluate the maturation of human embryonic stem cell-derived retinal pigment epithelial (hESC-RPE) cells. The ultrastructure of the different collagen vitrigels was characterized by transmission electron microscopy, and the mechanical properties were evaluated by tensile testing. The pigmentation and polarization of cells, in addition to key RPE marker gene and protein expression levels, were analyzed to determine the differentiation of hESCs on the gels. The hESC-RPE differentiation was most significant in collagen vitrigels with low fibril density with mature collagen fibrils with diameter of around 60nm and Young's modulus of 2.41±0.13MPa. This study provides insight into the influence of collagen nanofibrillar structures on hESC-RPE maturation and presents a potential bioengineered substratum for hESC-RPE for future preclinical and clinical applications.

In situ fibrillizing amyloid-beta 1-42 induces neurite degeneration and apoptosis of differentiated SH-SY5Y cells

The progression of Alzheimer’s disease is causatively linked to the accumulation of amyloid-β aggregates in the brain, however, it is not clear how the amyloid aggregates initiate the death of neuronal cells. The in vitro toxic effects of amyloid peptides are most commonly examined using the human neuroblastoma derived SH-SY5Y cell line and here we show that differentiated neuron-like SH-SY5Y cells are more sensitive to amyloid peptides than non-differentiated cells, because the latter lack long neurites. Exogenous soluble amyloid-β 1–42 covered cell bodies and whole neurites in differentiated cells with dense fibrils, causing neurite beading and fragmentation, whereas preformed amyloid-β 1–42 fibrils had no toxic effects. Importantly, spontaneously fibrillizing amyloid-β 1–42 peptide exhibited substantially higher cellular toxicity than amyloid-β 1–40, which did not form fibrils under the experimental conditions. These results support the hypothesis that peptide toxicity is related to the active fibrillization process in the incubation mixture.

A viscoelastic anisotropic hyperelastic constitutive model of the human cornea

A constitutive model based on the continuum mechanics theory has been developed which represents interlamellar cohesion, regional variation of collagen fibril density, 3D anisotropy and both age-related viscoelastic and hyperelastic stiffening behaviour of the human cornea. Experimental data gathered from a number of previous studies on 48 ex vivo human cornea (inflation and shear tests) enabled calibration of the constitutive model by numerical analysis. Wide-angle X-ray scattering and electron microscopy provided measured data which quantify microstructural arrangements associated with stiffness. The present study measures stiffness parallel to the lamellae of the cornea which approximately doubles with an increase in strain rate from 0.5 to 5%/min, while the underlying stromal matrix provides a stiffness 2–3 orders of magnitude lower than the lamellae. The model has been simultaneously calibrated to within 3% error across three age groups ranging from 50 to 95 years and three strain rates across the two loading scenarios. Age and strain-rate-dependent material coefficients allow numerical simulation under varying loading scenarios for an individual patient with material stiffness approximated by their age. This present study addresses a significant gap in numerical representation of the cornea and has great potential in daily clinical practice for the planning and optimisation of corrective procedures and in preclinical optimisation of diagnostic procedures.

Chondroitin Sulfate–Based Biocompatible Crosslinker Restores Corneal Mechanics and Collagen Alignment

To evaluate the crosslinking effect of functionalized chondroitin sulfate (CS) in an ex vivo rabbit cornea model. Chondroitin sulfate molecules were chemically modified with the N-hydroxysuccinimide (NHS) group. Enucleated rabbit eyes were crosslinked with 2, 5, or 10 mg/mL CS-NHS solution for 30 or 60 minutes. The CS-NHS penetration, corneal swelling ratio, Young's modulus, and ultrastructure of the crosslinked corneas were characterized. In addition, rabbit corneas were further treated with a collagenase-chondroitinase solution to create an ex vivo keratoconus (KC)-like model. The KC model corneas were crosslinked with a standard riboflavin-ultraviolet (UV) method or alternatively with CS-NHS. Corneal mechanics, ultrastructure, and keratocyte gene expression were evaluated after UV and CS-NHS crosslinking. CS-NHS effectively penetrated into the corneal stroma within 60 minutes of treatment initiation. CS-NHS crosslinking reduced the swelling ratio by 35%, increased Young's modulus by 20%, and increased collagen fibril diameter and density. CS-NHS crosslinking improved corneal mechanics of KC model corneas to levels comparable to those with UV crosslinking. Moreover, CS-NHS crosslinking demonstrated significant downregulation of proinflammatory gene expression of keratocytes, indicating a potential protective effect imparted by CS-NHS during crosslinking. Our results demonstrated that CS-NHS can reinforce normal and KC model corneal mechanics, and restore collagen density and alignment in KC model corneas without causing extensive keratocyte apoptosis and proinflammatory gene upregulation. Therefore, CS-NHS crosslinking can potentially provide an effective, safe, and biocompatible means of corneal reinforcement.

A metabolite of leucine (β-hydroxy-β-methylbutyrate) given to sows during pregnancy alters bone development of their newborn offspring by hormonal modulation.

The effects of dietary β-hydroxy-β-methylbutyrate (HMB) supplementation during gestation on bone, growth plate, and articular cartilage in newborns were determined. Thermal analysis of articular cartilage was performed to examine the structural changes in collagen. At day 70 of gestation, a total of 12 sows (Large White Polish breed, at the second parity) were randomly assigned to two groups, with each group receiving either a basal diet or the same diet supplemented with 0.2 g/day HMB until the 90th day. Maternal HMB supplementation enhanced body weight, bone length, and diameter in males. It also improved geometric and mechanical properties contributing to increased bone morphology and endurance. In turn, alteration of the length was only observed in females. The positive effects were mediated by increased serum concentrations of insulin-like growth factor-1 and leptin. HMB-treatment enhanced the concentration of FSH, LH, estradiol, and testosterone. Serum TAP was enhanced by the HMB-treatment by 34% in females and 138% in males. Beneficial effects of the HMB-treatment on trabecular bone and content of proteoglycans in articular cartilage were shown. The HMB-treatment significantly changed the collagen structure in cartilages, especially in the females, which was demonstrated by the PSR analysis. Differences between the HMB-supplemented and the control females in the calorimetric peak temperatures were presumably related to different collagen fibril density in the articular cartilage structure. In summary, maternal HMB supplementation in the mid-gestation period significantly improved general growth and mechanical endurance of long bones by the influence on the somatotropic and pituitary-gonadal axes in the offspring.

Mechanobiological modelling of tendons: Review and future opportunities.

Tendons are adapted to carry large, repeated loads and are clinically important for the maintenance of musculoskeletal health in an increasing, actively ageing population, as well as in elite athletes. Tendons are known to adapt to mechanical loading. Also, their healing and disease processes are highly sensitive to mechanical load. Computational modelling approaches developed to capture this mechanobiological adaptation in tendons and other tissues have successfully addressed many important scientific and clinical issues. The aim of this review is to identify techniques and approaches that could be further developed to address tendon-related problems. Biomechanical models are identified that capture the multi-level aspects of tendon mechanics. Continuum whole tendon models, both phenomenological and microstructurally motivated, are important to estimate forces during locomotion activities. Fibril-level microstructural models are documented that can use these estimated forces to detail local mechanical parameters relevant to cell mechanotransduction. Cell-level models able to predict the response to such parameters are also described. A selection of updatable mechanobiological models is presented. These use mechanical signals, often continuum tissue level, along with rules for tissue change and have been applied successfully in many tissues to predict in vivo and in vitro outcomes. Signals may include scalars derived from the stress or strain tensors, or in poroelasticity also fluid velocity, while adaptation may be represented by changes to elastic modulus, permeability, fibril density or orientation. So far, only simple analytical approaches have been applied to tendon mechanobiology. With the development of sophisticated computational mechanobiological models in parallel with reporting more quantitative data from in vivo or clinical mechanobiological studies, for example, appropriate imaging, biochemical and histological data, this field offers huge potential for future development towards clinical applications.