Delivery Of Peptide Drugs Research Articles

A new opening for orally taken peptide drugs.

Negatively charged nanoparticles of about 50 nm in size permit the oral delivery of insulin and other peptide drugs by temporally enhancing the permeability of the intestinal wall.

BIOAVAILABILITY ENHANCEMENT AND LIPID NANOCARRIER BASED DELIVERY OF PEPTIDES AND PROTEINS

Peptides and proteins are vital biomacromolecules that perform several bodily functions in various physiological and biological processes. Being biocompatible and biodegradable, these macromolecules are considered promising platforms for delivery of drugs and genes. However, peptides and proteins suffer from major limitations including enzymatic degradation, short circulation half-lives, and poor membrane permeability that leads to poor bioavailability, challenging their effective delivery. This article briefly discusses the inherent challenges in peptide and protein delivery along with strategies for bioavailability enhancement and lipid nanocarriers as prospective systems for peptide and protein drug delivery.

Materials for oral delivery of proteins and peptides

Throughout history, oral administration has been regarded as the most convenient mode of drug delivery, as it requires minimal expertise and invasiveness. Although oral delivery works well for small-molecule drugs, oral delivery of macromolecules (particularly proteins and peptides) has been limited by acidic conditions in the stomach and low permeability across the intestinal epithelium. Accordingly, the large numbers of biologic drugs that have become available in the past 10 years typically require administration by injection or infusion. As such, a renewed emphasis has been placed on the development of novel materials that overcome the physiological challenges of oral delivery for macromolecular agents. This Review provides an overview of physiological barriers to the oral delivery of biologics and highlights the advances made in materials across various length scales, from small molecules to macroscopic devices. This Review also describes the current status of materials for oral delivery of protein and peptide drugs. New materials, beyond those that have already obtained regulatory approval, are needed to improve the bioavailability of orally administered proteins. In this Review, barriers to the oral delivery of protein-based therapies are discussed, along with the current translational landscape and state of the art of materials for oral protein delivery.

Electrospining of Nanofibrous Meshes Composed of Hypromellose and Poly(vinyl alcohol) for One-Day Release of Cationic Peptide.

Various biocompatible polymers have been developed using electrospun nanofibers for local drug delivery matrices, but many of them are non-FDA-approved polymers or chemicals. Material safety should be considered in biomedical devices, but the effectiveness of electrospun nanofibers is limited with only the approved chemicals. Therefore, we considered the material in FDA-approved polymers and solvents and developed nanofibers using the general additives in the pharmaceutical industry, such as hypromellose, poly(vinyl alcohol) (PVA), and Gellan. The nanofiber, mainly composed of hypromellose and PVA, was applied to a local peptide drug delivery system. Electrostatically complexed Gellan and peptide were loaded in the nanofiber by co-electrospinning. The morphology of the nanofibers with different PVA blending ratios was visualized by scanning electron microscope. The nanofiber composed of only hydrophilic polymers quickly wetted in water and became a transparent gel-like lump. A drug release test of peptide-loaded nanofiber was performed resulted in 37% of initial burst release suppression with the gellan and peptide loaded nanofiber compared with solely peptide loaded hypromellose nanofiber. In addition, higher PVA blending to hypromellose was slightly effective for sustained release of peptide compared with pure peptide-loaded hypromellose nanofiber. Therefore, we suggest the potential application of hypromellose/PVA nanofiber-loaded Gellan/peptide complex to a mucosal layer drug delivery patch.

Coating of PLA-nanoparticles with cyclic, arginine-rich cell penetrating peptides enables oral delivery of liraglutide

Until today, the oral delivery of peptide drugs is hampered due to their instability in the gastrointestinal tract and low mucosal penetration. To overcome these hurdles, PLA (polylactide acid)-nanoparticles were coated with a cyclic, polyarginine-rich, cell penetrating peptide (cyclic R9-CPP). These surface-modified nanoparticles showed a size and polydispersity index comparable to standard PLA-nanoparticles. The zeta potential showed a significant increase indicating successful CPP-coupling to the surface of the nanoparticles. Cryo-EM micrographs confirmed the appropriate size and morphology of the modified nanoparticles. A high encapsulation efficiency of liraglutide could be achieved. In vitro tests using Caco-2 cells showed high viability indicating the tolerability of this novel formulation. A strongly enhanced mucosal binding and penetration was demonstrated by a Caco-2 binding and uptake assay. In Wistar rats, the novel nanoparticles showed a substantial, 4.5-fold increase in the oral bioavailability of liraglutide revealing great potential for the oral delivery of peptide drugs.

Strategy for Peptide Drug Delivery via Nose-to-Brain Transport Pathways: Challenges to Pharmacotherapy for Dementia

Strategy for Peptide Drug Delivery via Nose-to-Brain Transport Pathways: Challenges to Pharmacotherapy for Dementia

Cancer-targeted and intracellular delivery of Bcl-2-converting peptide with functional macroporous silica nanoparticles for biosafe treatment

Therapeutic peptide, NuBCP-9 (N9) as a Bcl-2 functional converter, has been demonstrated to have the remarkable anticancer efficiency in Bcl-2-abundant cancer. However, it faced technical challenges in clinical use, such as the low bioavailability, the easily-destroyed bio-stability, and the insusceptibility to cellular interior. With the potential of mesoporous silica nanoparticles (MSNs) as the promising delivery vehicle of therapeutic macromolecules, we developed a kind of MSNs with the surface coating of folic acid (FA) for cancer cell targeting and with the macropore loading of N9 peptide for cancer therapy. Our results showed that the functional MSNs had the relatively greater biosafety than the naked MSNs in zebrafish models, leading to less than 30% embryo of death at 200 μg/ml, which could further specifically target the folate receptor (FR)-overexpressed cervical cancer HeLa cells instead of FR-negative normal embryonic kidney HEK 293T cells in a FA-competitive manner. N9 peptide with the delivery of functional MSNs could be internalized by HeLa cells, and co-localized with mitochondria in a Bcl-2-dependent manner. Moreover, N9 peptide delivered by FA-modified MSNs displayed the excellent anticancer efficiency with great selectivity, inducing approximately 52% HeLa cells into apoptosis. In summary, our results illustrated the potential of functional MSNs with large pore size as an efficient nanocarrier for the intracellular delivery of peptide drugs with targeting proteins to realize cancer therapy.

Design of a new pH‐activatable cell‐penetrating peptide for drug delivery into tumor cells

Cell-penetrating peptides (CPPs) have been considered as potential drug delivery vectors due to their remarkable membrane translocation capacity. However, lack of specificity and extreme systemic toxicity hamper their successful application for drug delivery. Here, we designed a new pH-activatable CPP, LHHLLHHLHHLLHH-NH2 (LH), by substitution of all lysines and two leucines of LKKLLKLLKKLLKL-NH2 (LK) with histidines. As expected, histidine-rich LH could be activated and penetrate into cells at pH 6.0, whereas its membrane transduction activity could be shielded at pH 7.4. In contrast, LK showed no obviously different cellular uptake at both pH conditions. Importantly, LH was significantly less cytotoxicity compared with LK at both pH values, suggesting a better safety for further application. In addition, after conjugation of camptothecin (CPT) with LH, this conjugate displayed remarkably pH-dependent antitumor activity than free CPT and LK-CPT. This study provides a new tumor pH-responsive CPP with low toxicity for selective anticancer drug delivery.

Development of PLGA nanoparticles for sustained release of a connexin43 mimetic peptide to target glioblastoma cells.

Effective therapeutic delivery of peptide and protein drugs is challenged by short in vivo half-lives due to rapid degradation. Sustained release formulations of αCT1, a 25 amino acid peptide drug, would afford lower dosing frequency in indications that require long term treatment, such as chronic wounds and cancers. In this study, rhodamine B (RhB) was used as a model drug to develop and optimize a double emulsion-solvent evaporation method of poly(lactic-co-glycolic acid) (PLGA) nanoparticle synthesis. Encapsulation of αCT1 in these nanoparticles (NPs) resulted in a sustained in vitro release profile over three weeks, characterized by an initial burst release of approximately 50% of total encapsulated drug over the first three days followed by sustained release over the remaining two and a half weeks. NP uptake by glioblastoma stem cells was through endocytosis and RhB and αCT1 were observed in cells after at least 4 days.

Investigation Of Vitamin B12-Modified Amphiphilic Sodium Alginate Derivatives For Enhancing The Oral Delivery Efficacy Of Peptide Drugs.

PurposePeptide drugs have been used in therapy various diseases. However, the poor bioavailability of peptide drugs for oral administration has limited their clinical applications, on account of the acidic environment and digestive enzymes inside the human gastrointestinal tract. To enhance stability in the human gastrointestinal tract, bioavailability, and targeted drug delivery of peptide drugs through oral administration, a vitamin B12-modified amphiphilic sodium alginate derivative (CSAD-VB12) was synthesized.Materials and methodsA vitamin B12-modified amphiphilic sodium alginate derivative (CSAD-VB12) was synthesized via the N,N’-dicyclohexylcarbodiimide active method at room temperature, and then characterized using FTIR and 1H NMR spectroscopy. Insulin was used as a model peptide drug and the insulin-loaded CSAD-VB12 (CSAD-VB12/insulin) nanoparticles with negative zeta potentials were prepared in PBS (pH=7.4). Scanning electron microscopy was used to observe CSAD-VB12/insulin as spherical nanoparticles. The CSAD-VB12 derivatives and CSAD-VB12/insulin nanoparticles displayed nontoxicity towards the human colon adenocarcinoma (Caco-2) cells by CCK-8 test. Caco-2 cell model was used to measure the apparent permeability (Papp) of insulin, CSAD/insulin and CSAD-VB12/insulin. Furthermore, confocal was used to confirm the endocytosis of intestinal enterocytes. Type 1 diabetes mice were used to evaluate the intestinal absorption and retention effect of test nanoparticles.ResultsThey were observed as spherical nanoparticles in the size of 30–50 nm. The CSAD-VB12 derivatives and CSAD-VB12/insulin nanoparticles displayed nontoxicity towards the human colon adenocarcinoma (Caco-2) cells. Comparing with insulin and the CSAD/insulin nanoparticles, the CSAD-VB12/insulin nanoparticles exhibited higher permeation ability through intestinal enterocytes in the Caco-2 cell model. Oral administration of the CSAD-VB12/insulin nanoparticles to Type 1 diabetic mice yields higher intestinal retention effect, targeted absorption, and outstanding efficacy.ConclusionCSAD-VB12 derivatives enhance the small intestinal absorption efficacy and retention of peptide by oral administration, which indicated that it could be a promising candidate for oral peptide delivery in the prospective clinical application.

In vivo evaluation of solid lipid microparticles and hybrid polymer-lipid microparticles for sustained delivery of leuprolide

This study aims to investigate the potential of solid lipid microparticles (MP) and hybrid polymer-lipid MPs for sustained delivery of a peptide drug, leuprolide. A peptide-phospholipid complex was prepared to increase the compatibility of the peptide with triglyceride (TG) and poly (lactide-co-glycolide) (PLGA). Peptide loaded solid lipid MPs, PLGA MPs, and hybrid MPs were prepared using a spray drying method and characterized in terms of particle size, morphology and encapsulation efficiency. The pharmacokinetics and pharmacodynamics of leuprolide after subcutaneous injection of spray-dried MPs were evaluated in rats. Spray-dried MPs were spherical ranging in size from 4 μm to 10 μm, which are suitable for injection. After subcutaneous administration of reconstituted MPs, leuprolide could be detected in plasma samples of rats for one to two months, depending on the formulation and dose. Sustained release of leuprolide from PLGA MPs and glyceryl tristearate (TG18) MPs was observed over one month, with a chemical castration effect of 25 and 30 days, respectively. The bioavailability of leuprolide from PLGA-TG18 hybrid MPs was approximately four times higher than that from TG18 MP and PLGA MP alone using the same dose of leuprolide (6 mg/kg). Chemical castration in rats was observed over 30 and 60 days after injection of the PLGA-TG18 hybrid MP with a dose of 3 mg/kg and 6 mg/kg leuprolide, respectively. Additionally, a much lower Cmax was observed for the hybrid MP group. In conclusion, spray-dried PLGA-triglyceride hybrid MPs can be used as better carriers than other MPs for subcutaneous delivery of peptide drugs due to the synergetic effect of lipids and PLGA for sustained drug release from the spray-dried MP.

Recent Advance in Polymer Based Microspheric Systems for Controlled Protein and Peptide Delivery.

Sustained-release systems made by biodegradable polymers for protein and peptide drug delivery have received considerable attention by academic researchers and major pharmaceutical companies around the world. Various types of biodegradable materials, including natural and synthetic polymers, have been applied to form protein and peptide drug carriers. Among these material candidates, poly lactic acid (PLA) and poly lactic-co-glycolic acid (PLGA) are the most commonly used biodegradable materials in the development of protein and peptide microspheres. In addition, many microsphere preparation technologies, including spray drying, coacervation, multiple emulsion solvent evaporation method and microporous membrane emulsification have been developed for microspheres preparation. In this review, we particularly summarize and briefly introduce the materials and methods that are used to fabricate microspheres as protein delivery systems. The existing opportunities and challenges for successful protein delivery are also discussed.

Dissolving microneedle based transdermal delivery of therapeutic peptide analogues

Microneedle technology offers a viable means of delivering biologically active pharmaceutical agents across the skin in a minimally invasive and virtually pain free manner. Previous work detailed the first successful transdermal delivery of a model peptide drug, polymyxin b, utilising a dissolving polymer-based microneedle system. The focus of this study was to examine the ability of a dissolving microneedle system to deliver a range of peptides of different sizes and properties. Analogue versions of 2 existing therapeutic peptides; pentagastrin and sincalide, were synthesised utilising Fmoc based solid phase peptide synthesis (SPPS) chemistry techniques and once successfully synthesised and purified, the peptide analogues were characterised using LC-MS. The peptide analogues were then incorporated into PVP/trehalose microneedle formulations. Skin permeation testing, in addition to skin penetration testing, was carried out to determine the effectiveness of the microneedle system to deliver the peptide analogues through porcine skin. The results obtained from these studies were then compared with the permeation results obtained utilising polymyxin B as the peptide drug cargo to evaluate the PVP/trehalose microneedle system's suitability to successfully deliver therapeutic peptides. Results indicated that the microneedle system successfully systemically delivered a higher overall percentage of the encapsulated peptides at an initially faster rate than peptide loaded control discs and in therapeutically relevant concentrations.

A lanthanide-peptide-derived bacterium-like nanotheranostic with high tumor-targeting, -imaging and -killing properties

Nanostructures formed with bioactive peptides offer an exciting prospect in clinical oncology as a novel class of therapeutic agents for human cancers. Despite their therapeutic potential, however, peptide-based nanomedicines are often inefficacious in vivo due to low cargo-loading efficiency, poor tumor cell-targeting specificity and limited drug accumulation in tumor tissues. Here, we describe the design, via assembly of a p53-activating peptide termed PMI, functionalized PEG and fluorescent lanthanide oxyfluoride nanocrystals, of a novel nanotheranostic shaped in flexible rods. This lanthanide-peptide nanorod or LProd of bionic nature exhibited significantly enhanced tumor-targeting and -imaging properties compared to its spherical counterpart. Importantly, LProd potently inhibited tumor growth in a mouse model of human colon cancer through activating tumor suppressor protein p53 via MDM2/MDMX antagonism, while maintaining a highly favorable biosafety profile. Our data demonstrate that LProd as a multifunctional theranostic platform is ideally suited for tumor-specific peptide drug delivery with real-time disease tracking, thereby broadly impacting clinical development of antitumor peptides.

Preparation, intestinal segment stability, and mucoadhesion properties of novel thymopentin-loaded chitosan derivatives coated with poly (n-butyl) cyanoacrylate nanoparticles.

BackgroundIn order to develop a promising carrier for the oral delivery of proteins and peptide drugs, a novel bioadhesive nanocarrier of chitosan (CTS) derivatives coated with poly (n-butyl) cyanoacrylate nanoparticles (PBCA-NPs) was prepared in this study.MethodsThree different thymopentin (TP5)-loaded nanoparticles were prepared in the present study. TP5-PBCA-NPs were developed by modifying an emulsion polymerization method, and CTS and chitosan–glutathione (CG) derivative-coated PBCA nanoparticles were obtained from the electrostatic interactions between CTS or CG with negatively charged PBCA nanoparticles.ResultsThe particle sizes of TP5-PBCA-NPs, TP5-CTS-PBCA-NPs, and TP5-CG-PBCA-NPs were 212.3±6.9, 274.6±8.2, and 310.4±7.5 nm, respectively, while the respective zeta potentials were −22.6±0.76, 23.3±1.2, and 34.6±1.6 mV with encapsulation efficiencies of 79.37%±2.15%, 74.21%±2.13%, and 72.65%±1.48%, respectively. An everted intestinal ring method indicated that drug stability was remarkably improved after incorporation into the nanoparticles, especially the CG-coated nanoparticles. The mucus layer retention rates for CTS- and CG-coated nanoparticles were 1.43 and 1.83 times that of the uncoated nanoparticles, respectively, using ex vivo mucosa. The in vivo mucoadhesion study illustrated that the transfer of uncoated PBCA-NPs from the stomach to the intestine was faster than that of CTS-PBCA-NPs and CG-PBCA-NPs, while the CG-PBCA-NPs presented the best intestinal retentive characteristic.ConclusionIn summary, this study demonstrated the feasibility and benefit of orally delivering peptide drugs using novel CTS derivative-coated nanoparticles with optimal stability and bioadhesive properties.

Sequential Delivery and Cascade Targeting of Peptide Therapeutics for Triplexed Synergistic Therapy with Real-Time Monitoring Shuttled by Magnetic Gold Nanostars.

Due to the outstanding synergistic effects and low-toxicity, combination therapy exhibits more considerable potential in antitumor activity than monotherapy. Herein, a core-shell magnetic gold nanostar (Fe3O4@GNS, MGNS)-based system for codelivery of a mitochondrial targeting amphipathic tail-anchoring peptide (ATAP) and a membrane-associated cytokine (tumor-necrosis-factor-related apoptosis-inducing ligand (TRAIL) was constructed. The magnetic core can facilitate delivery of the drug vehicle by external magnetic field, which results in accurate accumulation and enhances tumor cellular uptake for preliminary targeting. TRAIL and ATAP could sequentially target and be released toward the plasma membrane and mitochondria, initiating the extrinsic and intrinsic apoptosis pathways, respectively. The gold shell of MGNS can cause local tumor hyperthermia due to broad-band plasmon resonances in the near-infrared region, which can act as a complement with the peptide drug to further enhance apoptosis. Both in vitro and in vivo experiments revealed that rationally integrating extrinsic apoptosis, intrinsic apoptosis and hyperthermia for triplexed synergistic therapy, enabled the smart drug vehicle with pinpoint peptide drug delivery capabilities, and minimized side effects, enhancing the antitumor efficiency.

SEDDS for intestinal absorption of insulin: Application of Caco-2 and Caco-2/HT29 co-culture monolayers and intra-jejunal instillation in rats

To face the challenges of oral delivery of peptide and protein (P/P) drugs, self-emulsifying drug delivery systems (SEDDSs) containing monoacyl phosphatidylcholine (MAPC), Labrasol (LAB) and medium-chain (MC) monoglycerides as permeation enhancers (PEs) were evaluated for their effect on intestinal absorption of insulin.In this study, insulin was complexed with phosphatidylcholine (SPC) to form an insulin-SPC complex (ins-SPC) with increased lipophilicity. The following three SEDDSs: MCT(MAPC) (MC triglycerides and MAPC included), MCT(RH40) (MC triglycerides and Kolliphor® RH40 included) and LCT(MAPC) (long-chain triglycerides and MAPC included) were loading with ins-SPC (4% or 8% w/w of SPC). Three SEDDSs generated emulsions with droplet sizes between 50 and 470 nm and with zeta potentials between −5 to −25 mV in a simulated intestinal medium. Mucus-secreting Caco-2/HT29-MTX-E12 co-culture and Caco-2 monolayers were used as in vitro cell transport models to investigate insulin permeability. In comparison to insulin HBSS solution, MCT(MAPC) significantly increased the insulin permeability across co-culture and Caco-2 monolayers (2.0–2.5 × 10–7 cm/s). In an intra-jejunal (i.j.) instillation model in rats, MCT(RH40) significantly decreased the rat blood glucose after 0.5 h by 17.0 ± 2.5% and for MCT(MAPC), it was 23.6 ± 10.6%. Furthermore, a lipase inhibitor orlistat was incorporated into MCT(MAPC) to evaluate the effect of lipid digestion on insulin absorption. Results indicated that the incorporation of orlistat did not significantly alter the in vivo insulin absorption. Overall, the SEDDS MCT(MAPC) composed of natural PEs (MAPC and MC glycerides) and synthetic PE (LAB) significantly increased the intestinal absorption of insulin upon i.j. instillation. Although it is not possible to conclude if a single PE is dominating the intestinal absorption of insulin, MCT(MAPC) seems to have the potential for oral insulin delivery.

Molecular and Materials Engineering for Delivery of Peptide Drugs to Treat Type 2 Diabetes

Type 2 diabetes is exploding globally. Despite numerous treatment options, nearly half of type 2 diabetics are unsuccessful at properly managing the disease, primarily due to a lack of patient compliance, driven by adverse side effects as well as complicated and frequent dosing schedules. Improving the delivery of type 2 diabetes drugs has the potential to increase patient compliance and thus, greatly enhance health outcomes and quality of life. This review focuses on molecular and materials engineering strategies that have been implemented to improve the delivery of peptide drugs to treat type 2 diabetes. Peptide drugs benefit from high potency and specificity but suffer from instability and short half-lives that limit their utility as therapeutics and pose a significant delivery challenge. Several approaches have been developed to improve the availability and efficacy of antidiabetic peptides and proteins in vivo. These methods are reviewed herein and include devices, which sustain the release of peptides in long term, and molecular engineering strategies, which prolong circulation time and slow the release of therapeutic peptides. By optimizing the delivery of these peptides and proteins using these approaches, long-term glucose control can be achieved in type 2 diabetes patients.

Preparation of hollow porous silica nanospheres and their potential for glucagon-like peptide-1 delivery

To enable the use of hollow porous silica nanospheres (HPSNs) as drug delivery carriers, it is necessary to control their pore size according to the molecular weight of drugs encapsulated by HPSNs. Therefore, a method for the control of the number and size of pores distributed over shell structure of HPSNs was suggested in this study. Specifically, HPSNs were synthesized with different amounts of tetraethyl silicate (TES) and various pH conditions using polystyrene-methyl acrylic acid (PSA) latex particles as the templates, and the morphology of the obtained HPSNs, particularly, the number and size of the pores, and the shell thickness, was characterized by field emission scanning electron microscopy (FESEM). Additionally, the potential use of HPSNs as carriers for the delivery of the Glp-1 peptide drug was examined. Specifically, the internal storage of Glp-1 in HPSNs and the release of Glp-1 from HPSNs as a function of time were investigated. HPSNs had very high loading capacities for Glp-1 and a steady release of Glp-1 from HPSNs of approximately 10% was observed. These results indicate that HPSNs demonstrate great potential as materials for both protection of Glp-1 from external attack and its long-term release.

Protein and Peptide Drug Delivery-A Brief Review

Peptides and proteins are complex architecture therapeutics useful in several diseases. Several pharmaceutical and biopharmaceutical challenges limit their clinical applications. Continuous efforts are focussed for formulation of this therapeutics into safe and effective delivery systems. The present review briefly describes the possible methods for the delivery of protein and peptide drugs through various routes.