Delayed Drug Release Research Articles

Design and Evaluation of Paeonol-Loaded Liposomes in Thermoreversible Gels for Atopic Dermatitis.

Paeonol (PAE) is a hydrophobic drug. In this study, we encapsulated paeonol in a lipid bilayer of liposomes (PAE-L), which delayed drug release and increased drug solubility. When PAE-L was dispersed in gels (PAE-L-G) based on a poloxamer matrix material for local transdermal delivery, we observed amphiphilicity, reversible thermal responsiveness, and micellar self-assembly behavior. These gels can be used for atopic dermatitis (AD), an inflammatory skin disease, to change the surface temperature of the skin. In this study, we prepared PAE-L-G at an appropriate temperature for the treatment of AD. We then assessed the gel's relevant physicochemical properties, in vitro cumulative drug release, and antioxidant properties. We found that PAE-loaded liposomes could be designed to increase the drug effect of thermoreversible gels. At 32 °C, PAE-L-G could change from solution state to gelatinous state at 31.70 ± 0.42 s, while the viscosity was 136.98 ± 0.78 MPa.S and the free radical scavenging rates on DPPH and H2O2 were 92.24 ± 5.57% and 92.12 ± 2.71%, respectively. Drug release across the extracorporeal dialysis membrane reached 41.76 ± 3.78%. In AD-like mice, PAE-L-G could also relieve skin damage by the 12th day. In summary, PAE-L-G could play an antioxidant role and relieve inflammation caused by oxidative stress in AD.

PH-Responsive Super-Porous Hybrid Hydrogels for Gastroretentive Controlled-Release Drug Delivery

Super-porous hydrogels are considered a potential drug delivery network for the sedation of gastric mechanisms with retention windows in the abdomen and upper part of the gastrointestinal tract (GIT). In this study, a novel pH-responsive super-porous hybrid hydrogels (SPHHs) was synthesized from pectin, poly 2-hydroxyethyl methacrylate (2HEMA), and N, N methylene-bis-acrylamide (BIS) via the gas-blowing technique, and then loaded with a selected drug (amoxicillin trihydrate, AT) at pH 5 via an aqueous loading method. The drug-loaded SPHHs-AT carrier demonstrated outstanding (in vitro) gastroretentive drug delivery capability. The study attributed excellent swelling and delayed drug release to acidic conditions at pH 1.2. Moreover, in vitro controlled-release drug delivery systems at different pH values, namely, 1.2 (97.99%) and 7.4 (88%), were studied. These exceptional features of SPHHs-improved elasticity, pH responsivity, and high swelling performance-should be investigated for broader drug delivery applications in the future.

Preparation and tumor-targeting evaluation of BS-CyP albumin nanoparticles modified with hyaluronic acid based on boron neutron capture therapy.

Radiation therapy has been widely used in the clinical treatment of tumors. Due to the low radiation absorption of tumors, a high dose of ionizing radiation is often required during radiotherapy, which causes serious damage to normal tissues near tumors. Boron neutron capture therapy (BNCT) is more targeted than conventional radiotherapy. To improve the therapeutic effect of cancer, albumin was selected as the drug carrier to wrap the fluorescent tracer boron drug BS-CyP and prepare the nanoparticles. Then, we developed a novel tumor-targeting nano-boron drug by using hyaluronic acid to modify the nanoparticles. We found that BS-CyP albumin nanoparticles modified with hyaluronic acid effectively delayed drug release and enhanced the aggregation, in tumors, showing good safety with no obvious toxicity to cells and mice. This study confirmed the advantages of boron drugs modified with hyaluronic acid targeting tumors and may provide a reference for BNCT.

Multiple stimulus-response berberine plus baicalin micelles with particle size-charge-release triple variable properties for breast cancer therapy

Objective The aim was to develop a nanoscale drug delivery system with enzyme responsive and acid sensitive particle size and intelligent degradation aiming to research the inhibitory effect on breast cancer. Significance The delivery system addressed the problems of tissue targeting, cellular internalization, and slow drug release at the target site, which could improve the efficiency of drug delivery and provide a feasible therapeutic approach for breast cancer. Methods The acid sensitive functional material DSPE-PEG2000-dyn-PEG-R9 was synthesized by Michael addition reaction. Then, the berberine plus baicalin intelligent micelles were prepared by thin-film hydration. Subsequently, we characterized the physical and chemical properties of berberine plus baicalin intelligent micelles, evaluated its anti-tumor effects in vivo and in vitro. Results The target molecule was successfully synthesized, and the intelligent micelles showed excellent chemical and physical properties, delayed drug release and high encapsulation efficiency. In vitro and in vivo experiments also confirmed that the intelligent micelles could effectively target tumor sites, penetrate tumor tissues, enrich in tumor cells, inhibit tumor cell proliferation, inhibit tumor cell invasion and migration, and induce tumor cell apoptosis. Conclusion Berberine plus baicalin intelligent micelles have excellent anti-tumor effects and no toxicity to normal tissues, which provides a new potential drug delivery strategy for the treatment of breast cancer.

Enhanced anti-biofilm activity of the minocycline-and-gallium-nitrate using niosome wrapping against Acinetobacter baumannii in C57/BL6 mouse pneumonia model.

Acinetobacter baumannii is a worldwide health issue in terms of its high antibiotic resistance and ability to form biofilms. Nanoparticles (NPs) with high biocompatibility, high penetrating ability, and low medication dose can successfully treat the antibiotic-resistant infections. In this research, the anti-biofilm activity of niosomes containing minocycline and gallium nitrate (GaN) against A. baumannii biofilm was determined. In order to improve their anti-biofilm properties, minocycline and GaN were encapsulated in niosomes as biocompatible drug carriers. The niosomes' size, zeta potential, shape, stability, drug entrapment efficacy, drug release pattern and antibacterial activity were assessed. Several clinical samples were isolated from the lungs of patients hospitalized at Loghman hospital, Tehran, Iran. The biofilm formation of most lethal clinical isolates of A. baumannii was analyzed. The pneumonia model was generated by intranasally administering A. baumannii suspension to anesthetized mice whose immune systems was compromised twice by cyclophosphamide. Lung infection of the mouse with A. baumannii was confirmed using PCR. After treatment, the lungs were excised under sterile conditions and stained with hematoxylin and eosin (H&E) to determine histological symptoms, inflammation and intercellular secretions. The niosomes contained minocycline and GaN had an average size of 230nm and a zeta potential of -40mV, respectively. The percentage of drug entrapment and delayed drug release was both high in niosomal formulations. Niosomes containing minocycline and GaN dispersed 1, 3 and 5day old biofilms. The mice given the combination of two compounds required less time to be treated than the animals given the single medication (minocycline). The minocycline& GaN-loaded niosomes could be considered as promising candidates to treat the infections caused by A. baumannii biofilm.

TARTESSUS: A Customized Electrospun Drug Delivery System Loaded with Irinotecan for Local and Sustained Chemotherapy Release in Pancreatic Cancer.

Post-surgical chemotherapy in pancreatic cancer has notorious side effects due to the high dose required. Multiple devices have been designed to tackle this aspect and achieve a delayed drug release. This study aimed to explore the controlled and sustained local delivery of a reduced drug dose from an irinotecan-loaded electrospun nanofiber membrane (named TARTESSUS) that can be placed on the patients' tissue after tumor resection surgery. The drug delivery system formulation was made of polycaprolactone (PCL). The mechanical properties and the release kinetics of the drug were adjusted by the electrospinning parameters and by the polymer ratio between 10 w.t.% and 14 w.t.% of PCL in formic acid:acetic acid:chloroform (47.5:47.5:5). The irinotecan release analysis was performed and three different release periods were obtained, depending on the concentration of the polymer in the dissolution. The TARTESSUS device was tested in 2D and 3D cell cultures and it demonstrated a decrease in cell viability in 2D culture between 72 h and day 7 from the start of treatment. In 3D culture, a decrease in viability was seen between 72 h, day 7 (p < 0.001), day 10 (p < 0.001), 14 (p < 0.001), and day 17 (p = 0.003) as well as a decrease in proliferation between 72 h and day 10 (p = 0.030) and a reduction in spheroid size during days 10 (p = 0.001), 14 (p < 0.001), and 17 (p < 0.001). In conclusion, TARTESSUS showed a successful encapsulation of a chemotherapeutic drug and a sustained and delayed release with an adjustable releasing period to optimize the therapeutic effect in pancreatic cancer treatment.

Exploitation of capsule system for colon targeted drug delivery of biopolymer-based microparticles: in vivo and in vitro applications

The current study was to improve and control aceclofenac delivery prepared as biopolymer-based microparticles for effective colon-targeted drug delivery using modified gelatin capsules (MGCs) at different time intervals developed in two batches (C1 and C2). Microparticles were formulated with extracted mucuna gum using liquid paraffin oil (AC.LPO) and soybean oil (AC.SO) and evaluated in vitro for physicochemical performance and in vivo in rats. Encapsulation efficiency ranges from 54.48 ± 0.21% to 82.83 ± 0.22% for AC.LPO and 52.64 ± 0.11% to 80.36 ± 0.22% for AC.SO. SEM showed oblong and irregular shapes with porous and cracked surfaces. DSC showed low enthalpy and a very broad endothermic peak depicting high amorphous property. Delayed drug release was observed in the upper gastrointestinal tract with sustained release depicted in the lower gastrointestinal tract (GIT) using 3 and 9-h batch C1 of MGCs. AC.SO exhibited significantly (p < 0.05) higher anti-inflammatory activity (86%) than AC.LPO (77%). Hence, aceclofenac colon delivery could be improved and controlled using biopolymer-based colon-targeted microparticles delivered with MGCs.

Tumor-Specific Monomethyl Auristatin E (MMAE) Prodrug Nanoparticles for Safe and Effective Chemotherapy.

A prodrug is bioreversible medication that is specifically converted to the active drugs by enzymes overexpressed in the tumor microenvironment, which can considerably reduce the chemotherapy-induced side effects. However, prodrug strategies usually have low antitumor efficacy compared to free drugs by delayed drug release. This is because they need time to be activated by enzymatic cleavage and they also cannot be fully recovered to the active drugs. Therefore, highly potent anticancer drug should be considered to expect a sufficient antitumor efficacy. Herein, we propose tumor-specific monomethyl auristatin E (MMAE) prodrug nanoparticles for safe and effective chemotherapy. The cathepsin B-specific cleavable FRRG peptide and MMAE are chemically conjugated via one-step simple synthetic chemistry. The resulting FRRG-MMAE molecules form stable nanoparticles without any additional carrier materials by hydrophobic interaction-derived aggregations. The FRRG-MMAE nanoparticles efficiently accumulate within the tumor tissues owing to the enhanced permeability and retention (EPR) effect and inhibit the tubulin polymerization by releasing free MMAE in the cathepsin B-overexpressed tumor cells. In contrast, FRRG-MMAE nanoparticles maintain a non-toxic inactive state in the normal tissues owing to innately low cathepsin B expression, thereby reducing MMAE-related severe toxicity. Collectively, this study provides a promising approach for safe and effective chemotherapy via MMAE-based prodrug nanoparticles, which may open new avenues for advanced drug design for translational nanomedicine.

Formulation, optimization, and in-vitro-ex-vivo evaluation of dual-crosslinked zinc pectinate-neem gum-interpenetrating polymer network mediated lansoprazole loaded floating microbeads

Low methoxy pectin (LM pectin) suffers from burst release owing to its high swellability and solubility in water. Consequently, in ways to design an ideal drug delivery system, these obstacles must be surmounted. Therefore, the work aimed to design dual crosslinked LM pectin -neem gum (NG) mediated interpenetrating polymer network (IPN) floating mucoadhesive microbeads for lansoprazole (LNZ) gastro-retentive delivery. In short, LNZ-loaded floating microbeads were achieved by using the ionic gelation method wherein zinc acetate was preferred as a crosslinking agent. The optimization of IPN microbeads was performed employing a 32factorial design wherein concentration of pectin and NG was considered as independent factors whereas dependant factors are entrapment efficiency and drug release. Importantly, carboxylic functionality of low methoxy (LM) pectin and hydroxylic functionality NG cross-linked with Zn+2 forms a 3D network. Diffractogram and thermogram revealed that conversion of drug from crystalline to amorphous form because of entrapment of drug within polymeric network. Anticipated floating microbeads showed that polymer concentration had considerable effect on drug encapsulation efficiency and drug release. Briefly, optimizing floating microbeads (Batch B:5) showed maximum drug entrapment (87.47 %) with a delayed drug release (69.20 %, at 8 h) due to formation of strong IPN. Moreover, it showed good mucoadhesive aptitude with goat stomach mucosa because of entanglement between gum and mucus layer. In addition, use of calcium silicate assists to modulate floating profile of IPN microbeads. Therefore, designing dual crosslinked zinc-pectinate-NG mediated IPN floating mucoadhesive microbeads will offer a new substitute for floating delivery.

Formulation and Evaluation for Solid Lipid Microparticles of Efonidipine

Design a dosing frequency level for efonidipine and examine its pharmacokinetics and dynamics. Solid Lipid Microparticles were made using efonidipine. ATR-FTIR research 4000 to 400cm-1, SEM analysis, Diffrantional Scanning Calorimetry, Power X-ray diffraction. The current state of in vitro drug release research is discussed. Then we’ll look at the ingredients and procedures for making solid lipid microparticles. It is possible to prepare and use microparticles in many ways. Hypotensive solid lipid microparticles with efonidipine showed promise. They all survived three months at 4°C. Oral administration is the most usual technique. Many pharmacological dosage forms are intended to delay drug release. Its systemic circulation and plasma profile are prolonged.

Characterization Formulation and in Vitro Assesment of Pulsatile Drug Delivery of Montelukast Sodium

The Montelukast pulsatile delivery system was created with the goal of delivering the drug to the colon for successful treatment of nocturnal asthma. The microspheres were sealed within the insoluble hard gelatin capsule body with an erodible hydrogel plug to create a time delayed capsule. Emulsion solvent evaporation was used to make the microspheres. Based on dissolving tests, optimised microsphere formulations were designed. The entire device was enteric coated in order to overcome the variability in gastric emptying time and achieve colon-specific delivery. The hydrogel plug (HPMC K100 and lactose in a 1:1 ratio) with a hardness of 4.5kg/cm2 and a weight of 100 mg was placed in the capsule opening and found to be effective in delaying release of the drug in small intestinal fluid, ejecting the plug into colonic fluid, and releasing the microspheres into colonic fluid after a 5-hour lag time. Three dissolving medium with pH 1.2, 7.4, and 6.8 were employed consecutively to imitate pH fluctuations along the GI tract. The medication and polymer had no interaction, according to the FTIR analysis. Montelukast microspheres 1:4 ratio had the longest release time of all the formulations, lasting 12 hours. The results showed that the device is capable of delaying drug release for a programmable period of time and treating asthma. Keywords: Montelukast, hydrogel plugs, pulsatile delivery, nocturnal asthma, microspheres.

Passive and iontophoretic delivery of bifonazole loaded Liposomal formulation: A comparative study

Fungal infections are one of the most common dermatological conditions worldwide. The goal of this study was to create and test a liposomal version of the antifungal medication Bifonazole. The thin film approach was used to make nine batches of Bifonazole liposomal gel, each with a different ratio of cholesterol, soya lecithin, and stearyl amine. It was investigated how formulation variables affected entrapment efficiency, particle size, surface charge, and drug release behaviour. The addition of a positively charged surfactant like stearyl amine improves the entrapment effectiveness of Bifonazole into liposomes considerably. When compared to the other formulations, the LFG8 formulation had the highest drug-loading capacity (83.210.69%). After 24 hours, the total amount of medication released from the Bifonazole liposomal gel ranged from 51.520.67% to 83.210.69%. The molar ratio of soya lecithin in the formulation rose, delaying drug release. This may be due to Bifonazole's interaction with the vast surface area of the liposome's lipid bilayer membrane and the thickness and fluidity of the soya lecithin layer. In an ex-vivo skin permeation investigation, it was discovered that iontophoretic administration had superior penetration than passive diffusion. Iontophoresis dramatically enhances the amount of medication that is absorbed through the skin.

An Investigation for Skin Tissue Regeneration Enhancement/Augmentation by Curcumin-Loaded Self-Emulsifying Drug Delivery System (SEDDS).

Diabetes, one of the global metabolic disorders, is often associated with delayed wound healing due to the elevated level of free radicals at the wound site, which hampers skin regeneration. This study aimed at developing a curcumin-loaded self-emulsifying drug delivery system (SEDDS) for diabetic wound healing and skin tissue regeneration. For this purpose, various curcumin-loaded SEDDS formulations were prepared and optimized. Then, the SEDDS formulations were characterized by the emulsion droplet size, surface charge, drug content/entrapment efficiency, drug release, and stability. In vitro, the formulations were assessed for the cellular uptake, cytotoxicity, cell migration, and inhibition of the intracellular ROS production in the NIH3T3 fibroblasts. In vivo, the formulations’ wound healing and skin regeneration potential were evaluated on the induced diabetic rats. The results indicated that, after being dispersed in the aqueous medium, the optimized SEDDS formulation was readily emulsified and formed a homogenous dispersion with a droplet size of 37.29 ± 3.47 nm, surface charge of −20.75 ± 0.07 mV, and PDI value of less than 0.3. The drug content in the optimized formulation was found to be 70.51% ± 2.31%, with an encapsulation efficiency of 87.36% ± 0.61%. The SEDDS showed a delayed drug release pattern compared to the pure drug solution, and the drug release rate followed the Fickian diffusion kinetically. In the cell culture, the formulations showed lower cytotoxicity, higher cellular uptake, and increased ROS production inhibition, and promoted the cell migration in the scratch assay compared to the pure drug. The in vivo data indicated that the curcumin-loaded SEDDS-treated diabetic rats had significantly faster-wound healing and re-epithelialization compared with the untreated and pure drug-treated groups. Our findings in this work suggest that the curcumin-loaded SEDDS might have great potential in facilitating diabetic wound healing and skin tissue regeneration.

Enteric-Coated Polymers Past and Present - A Review

Abstract: Tablet coating has evolved over the years, and today, there are various types of coating for the delayed release of a drug. Drugs can be enteric-coated to provide delayed release, protect the active pharmaceutical ingredients, minimize undesirable effects, and modify the pharmacokinetic properties of a drug, which will have clinical impacts. Certain types of drugs need to be enteric-coated for various reasons, such as gastric irritants or acid-liable drugs. This article will review ethylcellulose and polymethacrylate, their role in an enteric coating, and their process coating pa-rameters. Ethylcellulose can provide a short delayed release; it can be modified by adding pH-dependent polymers such as sodium alginate and hydroxypropyl methylcellulose phthalate for a long delayed release. On the other hand, polymethacrylate can also be employed to enteric coat drugs without additional polymers. Polymethacrylate, such as Eudragit®, comes in different grades with varying proportions of polymer ratio, allowing for targeted delayed drug release. These will impact which polymer to be employed. Upon choosing the coating material, modeling can also pre-dict in vitro and in vivo correlation as enteric-coated products can have unpredictable in vivo phar-macokinetic profiles. Today, the trend is moving away from the traditional coating, and towards new polymers, and with digitalization, there is a focus to start using data from laboratory experi-ments to be integrated with computational modeling, artificial intelligence, and machine learning to accurately predict key process parameters and film properties for high-quality products.

Therapeutic implementation in arterial thrombosis with pulmonary administration of fucoidan microparticles containing acetylsalicylic acid

Several antithrombotic drugs are available to treat cardiovascular diseases due to its high mortality and morbidity worldwide. Despite these, severe adverse effects that can lead to treatment withdrawal have been described, highlighting the importance of new therapies. Thus, this work describes the development of fucoidan microparticles containing acetylsalicylic acid (MP/F4M) for pulmonary delivery and in vitro, ex vivo, and in vivo evaluation. Microparticles were prepared via spray-drying and characterized in vitro (mucoadhesive properties, coagulation time, platelet aggregation, adhesion, and hemolysis) followed by ex vivo platelet aggregation, in vivo arterial thrombosis, and hemorrhagic profile. The formulation physicochemical characterization showed suitable characteristics along with delayed drug release, increased breathable particle fraction, and high washability resistance as well as antiplatelet activity and enhanced platelet adhesion in vitro. In in vivo assays, MP/F4M protected against arterial thrombosis, without changes in the hemorrhagic profile. Finally, no lung changes were observed after prolonged pulmonary administration, whereas isolated ASA led to an inflammatory response. In conclusion, pulmonary administration of fucoidan microparticles with an antiplatelet drug may be an alternative therapy to treat cardiovascular diseases, opening the field for different formulations.

Characterization and optimization of co-delivery Farnesol-Gingerol Niosomal formulation to enhance anticancer activities against breast cancer cells

The current investigation is designed to formulate and characterize an optimized Farnesol-Gingerol-loaded (N-Far/Gin) niosomal drug delivery system as a therapeutic approach for breast cancer. The formulation was optimized by altering the surfactant:cholesterol ratio, Span 60:Tween 60 ratio and lipid content, resulting in niosomes with acceptable encapsulation and a controlled release profile. The optimized niosomal formulation demonstrated excellent stability for up to two months with only slight alterations in size and drug encapsulation quality during the storage period. Furthermore, the results demonstrated a pH-dependent release pattern, with delayed drug release under physiological conditions (pH 7.4) and substantial drug release under acidic conditions (pH 5.4), meaning these niosomes display a potent therapeutic potential for breast cancer. Cytotoxicity assays showed a biocompatibility of N-Far/Gin with normal cells while exhibiting inhibitory activity on MCF7 and SKBR3 breast cancer cell lines. The N-Far/Gin down-regulated gene expression levels of BCL2, HER2, CDK4, CCND1, and CCNE while up-regulating gene expression levels of P21, BAX, CASP3, and CASP9 in breast cancer cell lines. Apoptosis assays indicated that N-Far/Gin induces apoptosis in both MCF7 and SKBR3 cell lines, which can be attributed to the synergic efficacy of the two agents. The ROS assay revealed high antioxidant activity of the N-Far/Gin formulation. The experimental findings from this study highlight the importance of highly biocompatible niosomal formulations to the future of nanomedicine; the co-delivery of two phytochemical compounds into cancer cells could enhance therapy effectiveness due to the synergistic impact.

Design and Comparative Evaluation of Vancomycin HCl-Loaded Rosin-Based In Situ Forming Gel and Microparticles.

Vancomycin hydrochloride (HCl) is a glycopeptide antibiotic used to treat serious or life-threatening infections, and it reduces plaque scores and gingivitis in periodontal patients. In this study, vancomycin HCl was incorporated into rosin in situ forming gel (ISG) and rosin in situ forming microparticles (ISM) to generate a local drug delivery system to treat periodontal disease. The physical properties of the ISG and ISM were measured, including pH, viscosity, injectability, adhesion properties, in-vitro transformation, and drug release. Moreover, the effectiveness of antimicrobial activity was tested using the agar-cup diffusion method against Staphylococcus aureus, Streptococcus mutans, Porphyromonas gingivalis, and Escherichia coli. Vancomycin HCl-loaded rosin-based ISG and ISM had a pH value in the range of 5.02–6.48 and exhibited the ease of injection with an injection force of less than 20 N. Additionally, the lubricity effect of the external oil phase of ISM promoted less work of injection than ISG and 40–60% rosin-based ISM showed good emulsion stability. The droplet size of emulsions containing 40%, 50%, and 60% rosin was 98.48 ± 16.11, 125.55 ± 4.75, and 137.80 ± 16.8 µm, respectively. Their obtained microparticles were significantly smaller in diameter, 78.63 ± 12.97, 93.81 ± 10.53, and 118.32 ± 15.61 µm, respectively, because the particles shrank due to the solvent loss from solvent exchange. Moreover, increasing the concentration of rosin increased the size of microparticles. After phase transformation, all formulations had better plasticity properties than elasticity; therefore, they could easily adapt to the specific shape of a patient’s gum cavity. Both developed ISG and ISM presented inhibition zones against S. mutans and P. gingivalis, with ISG presenting significantly more effectively against these two microbes (p < 0.05). The vancomycin HCl-loaded rosin ISG and ISM delayed drug release for 7 days with efficient antimicrobial activities; thus, they exhibit potential as the drug delivery systems for periodontitis treatment.

PEGylated aceclofenac solid lipid microparticles homolipid-based solidified reverse micellar solutions for drug delivery

Aceclofenac is a non-steroidal anti-inflammatory drug with poor aqueous solubility and a short half-life resulting in low bioavailability. Aceclofenac-loaded solid lipid microparticles based solidified reverse micellar solution (SLMs-SRMS) for oral drug delivery was investigated to improve the bioavailability and control drug release. Hot homogenization method was adopted to prepare the SLMs using a homolipid irvingia fat and Phospholipon® 90H with or without propylene glycol 6000 (PEGylation) in different ratios and characterized in vitro. The in vivo anti-inflammatory activity of the drug was determined on mice inflamed with carrageenan as phlogistic agent. Results showed that the morphology and particle sizes of the SLMs were spherical and smooth and ranged between 5.24 ± 0.01–97.44 ± 0.18 μm. EE % ranged between 67 - 81 %. A significant (p < 0.05) viscosity of 490 mPasec-1 was obtained. FTIR spectra indicated compatibility amongst the constituents. DSC showed a broad peak which depicted an imperfect matrix resulting in a deformation of crystal arrangement creating many spaces for drug entrapment. Delayed drug release was observed in almost all the formulations in SIF (pH, 6.8). Anti-inflammatory activity showed a significant inhibitory effect (p < 0.05, up to 90 %). Hence, the aceclofenac-loaded SLMs-SRMS showed desirable characteristics and could be used for controlled delivery of aceclofenac and thus alternative to conventional aceclofenac oral formulation.

Pharmacological Effects of Cisplatin Combination with Natural Products in Cancer Chemotherapy.

Cisplatin and other platinum-based drugs, such as carboplatin, ormaplatin, and oxaliplatin, have been widely used to treat a multitude of human cancers. However, a considerable proportion of patients often relapse due to drug resistance and/or toxicity to multiple organs including the liver, kidneys, gastrointestinal tract, and the cardiovascular, hematologic, and nervous systems. In this study, we sought to provide a comprehensive review of the current state of the science highlighting the use of cisplatin in cancer therapy, with a special emphasis on its molecular mechanisms of action, and treatment modalities including the combination therapy with natural products. Hence, we searched the literature using various scientific databases., such as MEDLINE, PubMed, Google Scholar, and relevant sources, to collect and review relevant publications on cisplatin, natural products, combination therapy, uses in cancer treatment, modes of action, and therapeutic strategies. Our search results revealed that new strategic approaches for cancer treatment, including the combination therapy of cisplatin and natural products, have been evaluated with some degree of success. Scientific evidence from both in vitro and in vivo studies demonstrates that many medicinal plants contain bioactive compounds that are promising candidates for the treatment of human diseases, and therefore represent an excellent source for drug discovery. In preclinical studies, it has been demonstrated that natural products not only enhance the therapeutic activity of cisplatin but also attenuate its chemotherapy-induced toxicity. Many experimental studies have also reported that natural products exert their therapeutic action by triggering apoptosis through modulation of mitogen-activated protein kinase (MAPK) and p53 signal transduction pathways and enhancement of cisplatin chemosensitivity. Furthermore, natural products protect against cisplatin-induced organ toxicity by modulating several gene transcription factors and inducing cell death through apoptosis and/or necrosis. In addition, formulations of cisplatin with polymeric, lipid, inorganic, and carbon-based nano-drug delivery systems have been found to delay drug release, prolong half-life, and reduce systemic toxicity while other formulations, such as nanocapsules, nanogels, and hydrogels, have been reported to enhance cell penetration, target cancer cells, and inhibit tumor progression.

Construction of calcium carbonate-liposome dual-film coated mesoporous silica as a delayed drug release system for antitumor therapy

As is well known to all, delivering drug precisely to the tumor site is beneficial to improve antitumor effect. In this study, we reported mesoporous silica nanoparticles (MSNs) coated with dual-film of calcium carbonate (CaCO3) and lipid bilayer (denoted as MSNs@CaCO3@liposomes) innovatively which achieve sustained drug release anchored at tumor microenvironment and enhanced biocompatibility. The pH-sensitive CaCO3 film acted as a guide to cap the pore channels of MSNs allowed pH-triggered drug release when transporting into cancer cells. Furthermore, MSNs@CaCO3 was capsuled by lipid bilayer to improve cellular uptake efficiency and biocompatibility in blood circulation. Morphology of nanoparticles was characterized by transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM) to confirm that double films were coated successfully. Doxorubicin hydrochloride (DOX) was efficaciously loaded into mesoporous pores as a model drug with a high drug loading content of 28%, forming DOX-loaded MSNs@CaCO3@liposomes (DOX/MSNs@CaCO3@liposomes). Non-specific protein adsorption and hemolysis test revealed enhanced biocompatibility. Drug release study in vitro showed DOX/MSNs@CaCO3@liposomes could delay to release DOX at pH 5.0 and avoid releasing at pH 7.4. In vitro and in vivo antitumor efficiency evaluation showed that DOX/MSNs@CaCO3@liposomes have a desirable inhibitory activity on tumor growth. Therefore, dual-film coated MSNs could be a good candidate for an antitumor drug delivery system.