Organic Degradation Research Articles

Prepared copper oxide nanoparticle colloidal solution by different laser ablation energy in liquid for enhanced organic dye degradation efficiency

Prepared copper oxide nanoparticle colloidal solution by different laser ablation energy in liquid for enhanced organic dye degradation efficiency

Bioelectricity drives transformation of nitrogen and perfluorooctanoic acid in constructed wetlands: Performances and mechanisms

In this study, constructed wetland-microbial fuel cell (CW-MFC) filled with modified basalt fiber (MBF) via iron modification was utilized for treating perfluorooctanoic acid (PFOA) containing sewage. Results showed the significant promotion by bioelectricity on ammonium and total nitrogen by 7.80–8.14 %. Although such enhancement was suppressed by PFOA, higher removal was still observed with closed circuit, and PFOA removal also increased by 9.05 %. Bioelectricity contributed to enrichment of bacteria involved in nitrifying (Nitrospira and Ellin6067), denitrifying (like Thauera and Dechloromonas), iron redox (Geobacter), and sulfate-reducing (Desulfobacter), aligned with up-regulated of functional genes, including amoA, narG , napA, narK, narS, nrfA, sulp and sqr. Enrichment of autohydrogenotrophic and sulfide-oxidizing autotrophic denitrifiers, and nitrate dependent iron oxidation bacteria by bioelectricity all promoted denitrification. Moreover, bioelectricity boosted relative abundance of organic compounds degradation enzymes, such as dehydrogenase, decarboxylase, and dehalogenase, supporting the enhancement on PFOA removal. Generally, PFOA was converted to short-chain perfluorocarboxylic acids (PFCAs) via decarboxylation, hydroxylation, HF elimination, hydrolysis, F- elimination, C-C bond scission, and dehydration in CW-MFC. The final PFCAs-products determined was perfluorobutyric acid. This work estimated feasibility of treating PFOA containing sewage by CM-MFC, and offered new insights on enhancing mechanisms of nitrogen and PFOA conversion.

BiOCl-PVDF nanofibrous membrane for synergic oil-water separation and degradation of dye

Polymeric membranes have garnered remarkable attention, attributed to the significant breakthrough in the filtration of oily wastewater. However, the major setbacks of pristine polymeric membranes include susceptibility to fouling and chemical instability. Addressing such issues, this work focusses in the modification of polymer membranes using a metal oxyhalide, such as Bismuth oxychloride (BiOCl). This modification not only enhances water purification capabilities but also strengthens the membrane, protecting it from environmental deterioration and extending its lifespan. BiOCl was integrated into an electrospun pristine nanofibrous polymeric membrane using hydrothermal technique. The synthesized membrane matrix displayed superhydrophilicity and underwater superoleophobicity, effectively separating oil-in-water mixtures and emulsions. Moreover, BiOCl was effectively utilized to assess organic pollutant adsorption and degradation through photocatalysis. In addition, the membrane exhibited exceptional recyclability and withstood harsh conditions, contributing to its mechanical stability. The numerous advantages, enhance the effectiveness of BiOCl modified membrane in water pollution remediation.

Captivating 2H-MoS2 nanoflowers for efficient NH3 detection and photocatalytic dye degradation

This research unveils the gas sensing and photocatalytic potential of 2H-MoS2 nanoflowers, offering a promising solution for ammonia sensing and wastewater remediation. The 2H phase of MoS2 nanoflowers is synthesized via a simple one-step hydrothermal method using ammonium heptamolybdate and thiourea. The elemental and morphological study confirms the formation of the 2H phase of MoS2 nanoflowers with an average sheet thickness of 14 nm. The XRD and HR-TEM analysis findings are in good accordance with the interlayer spacing of MoS2, calculated to be 0.64 nm. The 2H-MoS2 nanomaterial based chemiresistive sensor is tested for six different targets (NH3, C2H5OH, C3H6O, C3H7OH, HCHO, and C6H5CH3) and shows good selectivity towards ammonia (NH3) with the highest response of 81 %. The response-recovery time, repeatability, concentration, and humidity-based analysis are conducted for the analysis of the sensor. The fabricated 2H-MoS2 based sensor shows a response time of 8.5 s and a recovery time of 4.3 s. Furthermore, three model water contaminated dyes, MB, MO, and RB, are chosen for the photocatalytic experiment under visible light irradiation. The reusability, relative degradation, and pseudo-first-order analysis are used to evaluate the photocatalytic dye degradation properties of 2H-MoS2 nanoflowers. The reaction rate constant of 2H-MoS2 nanomaterials for MB, MO, and RB dyes is calculated to be (0.05010) min−1, (0.03458) min−1, and (0.02516) min−1, respectively. The maximum degradation efficiency of 2H-MoS2 nanoflowers towards MB, MO, and RB dye is 95 %, 86 %, and 76 %, respectively, under visible light irradiation. These findings suggest that the hydrothermally synthesized 2H-MoS2 nanoflowers have multifunctional applications such as effective NH3 sensors as well as photocatalysts for organic dye degradation, paving the way for more efficient and sustainable gas sensing and wastewater treatment technologies.

Sustainable treatment of combined industrial wastewater: synergistic phytoremediation with Eichhornia crassipes, Pistia stratiotes, and Arundo donax in biofilm wetlands

This study investigates the treatment of combined wastewater from Hattar Industrial Estate using Biofilm Wetlands (BW) planted with monoculture species: Eichhornia crassipes (EAC), Pistia stratiotes (WL), and Arundo donax (GR). Each species showed distinct capabilities in organic degradation, metal uptake, and pH stabilization. BW2, planted with EAC, achieved the highest total solids (TS) and total suspended solids (TSS) removal efficiencies of 66% and 65%, respectively. GR effectively reduced initial COD concentrations from 232 mg/L to 58.67 mg/L, while EAC and WL reached reductions to 72.78 mg/L and 70.67 mg/L, respectively. Overall, the plant efficiency ranking was EAC > GR > WL. These findings underscore the potential of these plant species in synergistic BW systems, highlighting their role as natural solutions for remediating complex industrial effluents. This research contributes to advancing eco-friendly wastewater treatment approaches, suggesting promising applications for sustainable practices in industrial contexts. RESEARCH HIGHLIGHTS This research assessed the effectiveness of phytoremediation using Eichhornia crassipes, Pistia stratiotes, and Arundo donax for removing pollutants i.e. heavy metals (Cd, Pb, Ni, K, Ca, Mg, Na, Fe, Hg) nitrates, phosphates and sulfates from combined industrial wastewater of Hattar Industrial Estate Pakistan. It highlighted the potential of selected plant species’ as natural treatment systems, providing crucial insights into their efficiency. Findings contribute to understanding nature-based solutions for complex industrial effluents.

Cobalt-doped graphitic carbon nitride: A multifunctional material for humidity sensing, electrochemical water splitting and environmental remediation applications

Graphitic carbon nitride (g-C3N4) has emerged as a promising eco-friendly material for catalysis and sensing applications due to their unique properties. However, limitations like low specific surface area, insufficient light absorption, and poor conductivity hinder their broader usability. Elemental doping has been established as an effective approach to modify the electronic structure and bandgap of g-C3N4 thus significantly expanding its light-responsive range for enhanced charge separation. This work reports on the fabrication of cost-effective and stable g-C3N4 and cobalt-doped g-C3N4 (Co@g-C3N4) via a simple one-step calcination process. The humidity sensing performance of both g-C3N4 and Co@g-C3N4 was evaluated across a broad humidity range (7 % - 94 % RH) at various testing frequencies. The results demonstrated good reversibility with Co@g-C3N4 exhibiting superior performance compared to pristine g-C3N4. Furthermore, the synthesized materials were assessed for their suitability as photoelectrochemical water splitting catalysts for hydrogen production, representing a step towards energy-efficient fuel cells. Notably, Co@g-C3N4 displayed enhanced performance with a lower onset potential (420 mV) and a lower Tafel slope (65.4 mV dec-1) for the hydrogen evolution reaction (HER) compared to undoped counterparts. Additionally, Co@g-C3N4 nanorods exhibited remarkable performance for the oxygen evolution reaction (OER), showcasing a lower onset potential (1.505 V) and a considerably low overpotential (270 mV), surpassing numerous reported electrocatalysts and even rivaling precious-metal-based ones. Finally, enhanced photocatalytic activities for organic dyes degradation were recorded for the mentioned materials. Therefore, g-C3N4 and related materials have great potential for their industrial electrochemcial applications.

Response of Bacterial Community Structure and Function in Rhizosphere Soil on the Photosynthesis of Selected Plant Types C3 and C4 under Bis(2,4,6-tribromophenoxy) Ethane Exposure

This study investigated the response of a bacterial community’s structure and function in the rhizosphere soil of C3 and C4 plants under bis(2,4,6-tribromophenoxy) ethane (BTBPE) exposure. The bacterial community composition was determined using 16S rRNA sequencing, while FAPROTAX and PICRUSt 2 were employed for functional predictions. Results showed significant differences between C3 and C4 plants in terms of bacterial community structure. C3 plants exhibited higher abundances of Proteobacteria, Bacteroidetes at the phylum level and Sphingomicrobium at the genus level, compared to C4 plants. Conversely, C4 plants had higher abundances of Actinobacteria and Patescibacteria at the phylum level and Nocardioides at the genus level. LEfSe and function prediction analyses revealed that the rhizosphere soil bacteria in C3 plants exhibited significantly higher enrichment in nitrogen fixation functions (p < 0.05), whereas C4 plants showed a significantly higher relative abundance of bacteria and functions related to organic pollutant degradation (p < 0.05). These findings suggest that the rhizosphere soil bacteria of C3 plants exhibit a stronger response to BTBPE exposure in nitrogen metabolism-related processes, while C4 plants possess superior biodegradation ability compared to C3 plants.

Photoactivation of sulfite by FeTiO3 for organic pollutant degradation: Performance and mechanism

In recent years, the exploration of sulfite (S(IV))-based advanced oxidation processes has attracted increasing attention due to its high performance in the degradation of aqueous organic contaminants. In this study, we investigated the activation of S(IV) by ilmenite (FeTiO3) under photo irradiation using phenol as a substrate. The FeTiO3/S(IV)/photo system demonstrated a remarkable phenol removal rate, achieving 81.4 % degradation within 30 min under optimal conditions. The photocatalytic mechanism involves the generation of electron-hole pairs in FeTiO3, with photogenerated holes activating the adsorbed S(IV) on the catalyst’s surface to produce various free radicals, among which SO4− is identified as the primary active species. Density functional theory calculations further suggest that electron transfer between ilmenite and S(IV) may occur via a Fe-O-S bridge. Additionally, the approach demonstrates satisfactory reusability of the photocatalyst and consistent effectiveness in real-water matrices. This study contributes to the development of more efficient, cost-effective, and environmentally friendly water treatment strategies by providing a deeper understanding of the proposed FeTiO3/S(IV)/photo system.

Efficient generation of 1O2 by activating peroxymonosulfate on graphitic carbon nanoribbons for water remediation

Few-layer graphitic carbon nanoribbons (GCN) with rich defective sites were prepared by pyrolysis at 800 oC in N2 of in situ-chelated Fe-polyaniline complexes synthesized via one-pot homogeneous Fenton-like oxidative polymerization of an acidic aniline solution. A minimal amount of iron (0.47 wt%) made a pivotal role in the nanoribbon growth and graphitization of GCN, and deposited highly dispersed iron species on GCN without post-synthesis acid leaching, which greatly simplified the synthesis procedure of GCN with improved yield. GCN exhibited high activity and stability for catalytic degradation of organic pollutants with peroxymonosulfate (PMS) mainly via non-radical pathways. The influences of various operating parameters on the catalytic performance of GCN were investigated. Scavenging tests, spin-trapping electron paramagnetic resonance spectra, electrochemical analyses, and theoretical calculations unveiled that 1O2 was the main reactive oxygen species generated from synergistic activation of PMS on GCN while GCN-mediated electron transfer made a minor contribution to organic degradation.

Enhanced sonophoto-catalytic and adsorption capabilities of Fe3O4@MC/MWCNT-CuO/Ag for petrochemical organic pollutants degradation from industrial process streams

To address the problem of petrochemical organic pollutants in water, specifically monoethylene glycol (MEG) present in industrial process streams, in this research, we synthesized and evaluated a multifunctional nanocomposite, Fe3O4@MC/MWCNT-CuO/Ag. The nanocomposite was produced by combining magnetic Fe3O4 nanoparticles, methylcellulose (MC), multi-walled carbon nanotubes (MWCNTs), and CuO/Ag nanoparticles by an integrated synthesis process. A consistent dispersion of nanoparticles, with diameters ranging from 30-40 nm, was discovered by FESEM analysis, showing effective integration without aggregation. Effective synthesis was demonstrated by well-doped and evenly dispersed CuO and Ag nanoparticles. Functional groups that improve electrostatic interactions with contaminants hence enhancing catalytic performance and adsorption efficiency, were validated by FTIR analysis. XRD indicated an unchanged crystal structure with an average crystallite size of 8.67 nm. The anticipated elemental composition was verified by EDS & mapping. A VSM study revealed magnetic characteristics (9.33 emu/g) that simplify nanocomposite separation and reuse. TGA proved thermal stability to be up to 600 °C. A BET study showed a highly specific surface area of 67.661 m2/g, enhancing adsorption. According to DRS and PL studies, the bandgap was lowered by 1.31 eV, which led to better optical absorption. The nanocomposite exhibited notable MEG removal efficiency, with 72 % in adsorption, 65 % in photocatalysis, and 56 % in sonocatalysis. This makes it a promising alternative for the remediation of organic pollutants in water treatment.

Enhanced photocatalytic degradation of Reactive Green 19 dye using earthworms like T-ZnO-CuO nano-composite material as a S-scheme heterojunction photocatalyst

Due to increasing organic dye pollution in the water environment, green and efficient photocatalyst are urgently needed to solve this problem. This study hypothesizes that green-synthesized nanocomposites, using plant leaf extracts, will significantly enhance the efficiency of organic dye degradation without the environmental drawbacks associated with traditional methods. Herein, enhanced degradation of Reactive Green 19 (RG 19) dye using earthworm like T-ZnO-CuO (TZC) nano-composite was reported. T-ZnO (TZ) and TZC nano-composite were synthesized using leaves extract of Thevetia peruviana plant. In the synthesis process, Thevetia peruviana leaves extract acts as a capping, stabilising and reducing agent, and additionally create a unique surface morphology of TZC nano-composite. The establishment of TZ and TZC nano-composite samples were investigated using FT-IR, XRD, FE-SEM with EDX, HR-TEM and UV–VIS DRS spectroscopy. Furthermore, band gap energy of TZ and TZC nano-composites were calculated using Tauc’s plot. The band gap energy of TZC2 nano-composite was determined to be 2.80 eV. The nano-composite photocatalyst (TZC) was utilised in the degradation of RG 19 dye with 96.89 % efficiency in 150 min at 20 mg/L dye concentration, pH=7.5, and 0.6 g/L catalyst dose. In order to investigate the tentative photocatalytic mechanism, scavenging study, recyclability experiment, and stability were also investigated. The findings show that O2− and OH radical species have higher degree of involvement in the degradation process. The kinetics of the degradation of RG 19 dye follows pseudo-first-order kinetics.

Recent progress on non-metallic carbon nitride for the photosynthesis of H2O2: Mechanism, modification and in-situ applications

Photocatalytic hydrogen peroxide (H2O2) production has been considered as a promising strategy for H2O2 synthesis due to its environmentally friendly. Among various photocatalysts, carbon nitride-based materials are excellent candidates for H2O2 production because of their excellent visible-light response, low cost and high stability. In this review, we summarize in detail the research progress on the photocatalytic production of H2O2 by carbon nitride. First, we summarize the basic principles of photocatalysis and photocatalytic H2O2 production. Second, the classification and modification methods of carbon-nitride-based materials are discussed, including morphology modulation, noble metal loading, defect control, heterojunction regulation, molecular structure engineering and elemental doping. Finally, the different in-situ applications of H2O2via photosynthesis were discussed, including disinfection and antibiotic resistant genes degradation, organic pollutants degradation, medical applications and fine chemical synthesis. This review brings great promise for in-situ H2O2 photosynthesis, which is expected to serve as a key component in future applications.

Phosphorus heteroatom doped BiOCl as efficient catalyst for photo-piezocatalytic degradation of organic pollutant and unveiling the mechanism: Experiment and DFT calculation

A novel phosphorus heteroatom doped bismuth oxychloride (P-BiOCl) catalyst was synthesized and the photo-piezocatalytic degradation of rhodamine B dye performances were explored under the ultrasound vibration and light illumination. The P-BiOCl exhibited excellent photo-piezocatalytic degradation activity, such as an ultra-high reaction kinetic rate constant of 0.3961 min−1, efficient degradation efficiency (94.7 % within 8 min) and excellent stability compared to solely piezocatalysis and photocatalysis. More impressively, these outstanding performances of P-BiOCl exceeded pure BiOCl and most other catalytic materials systems. The relevant experimental and density functional theory (DFT) calculation results were exhibited to clarify enhanced photo-piezocatalytic mechanism. The introduction of P heteroatom could reduce the bandgap of BiOCl, modulate electronic structure and charge redistribution, provide novel electron channel to promote electron transfer and restrain charge carriers recombination. Additionally, P-doped could also enhance the adsorption of oxygen and water molecules, promote intrinsic catalytic activity, leading to the increased production of active free radicals ·O2– and ·OH, thus significantly boosting the efficiency of organic pollutant degradation. This work provides a comprehensive understanding of heteroatom doping enhancing photo-piezocatalytic activity and presents a potential new strategy for designing highly efficient catalysts for wastewater treatment.

Assessment of photocatalytic activities of layered double hydroxide@petrochemical sludge biochar for sulfamethoxazole degradation

Layered double hydroxides (LDHs) as one of the popular photocatalysts have the drawbacks of compact structural arrangement and pronounced nano-particle clustering, which affect their photocatalytic performance for the degradation of organic pollutants from water or wastewater. Using biochar as a substrate matrix to support LDHs may be a good way to improve the photocatalytic performance of LDHs by avoiding agglomeration effect, promoting the separation of photogenerated electrons from holes for organics degradation. In this study, the composite of CoFe-LDH and petrochemical sludge biochar (CoFe-LDH@PBC) was fabricated and applied for the first time as photocatalyst for catalytic degradation of sulfamethoxazole (SMX). Results showed CoFe-LDH@PBC800/UV system exhibited excellent photocatalytic activity on SMX degradation than single CoFe-LDH/UV, PBC800/UV, or PBC105/UV system under various reaction conditions (photocatalyst dosage, pH, system speed, and SMX concentration). 100 % of SMX degradation efficiency and 88.98 % mineralization efficiency could be achieved in CoFe-LDH@PBC800/UV system within 100 min. The corresponded pseudo-first-order kinetic rate constant (kobs) of SMX degradation in CoFe-LDH@PBC800/UV system was 0.032 min−1, which was 3.20, 8.00, and 2.46 times higher than that of CoFe-LDH/UV, PBC800/UV, and PBC105/UV, respectively. In photocatalytic process, OH, O2−, and h+ participated in SMX degradation, among which h+ or OH played a major role. The good photocatalytic performance of CoFe-LDH@PBC800 composite was related to its excellent physiochemical properties, such as lower band gap (2.39 eV), high graphitization degree, and high conductivity, enabling efficient e−/h+ separation of photocatalyst for SMX degradation. Four distinct pathways of SMX degradation were proposed based on DFT theoretical calculations and byproducts of SMX degradation identified by LC-MS. Additionally, results from recycling tests suggested CoFe-LDH@PBC800 composite possessed a favorable reusability and could be applied for photocatalytic degradation of SMX at least 3 times. Over all, CoFe-LDH@PBC800 composite was proved to be an efficient photocatalyst for antibiotic degradation in water or wastewater and the reuse of petrochemical wastewater sludge was expected to realize the concept of resourceful and high-value utilization of waste biomass.

Mechanical-vibration-driven piezocatalytic degradation of organic pollutants over microcrystalline SnSe with selenium vacancies

Two-dimensional piezoelectric materials are attractive candidates to trigger piezoelectric catalytic reactions for organics degradation. Microcrystalline structures can endow them with enhanced piezocatalytic activity due totheir large surface area and abundant defect structures. In this work, microcrystalline SnSe with selenium vacancies (mc-SeVs SnSe) was synthesized and employed for piezocatalytic degradation of aqueous organics for the first time. Various instrumental testing results demonstrated that this unique microcrystalline SnSe has strong piezoelectric responses, abundant selenium vacancy defects and large active edges. Compared with crystalline SnSe, mc-SeVs SnSe showed superior piezocatalytic activity for the degradation of various organics in water. More importantly, mc-SeVs SnSe could induce the piezoelectric effect through mild mechanical energy to facilitate the efficient degradation of organic pollutants. The degradation efficiency of Crystal violet, p-nitrophenol, Malachite green, Congo red and Rhodamine B approached 100 % within 60 min reaction time. Superoxide and hydroxyl radicals were detected as the main reactive oxygen species generated in the piezocatalytic process. The degradation pathways of Rhodamine B were proposed based on high performance liquid chromatography-quadrupole-time of flight mass spectrum. The impact of strain on the alterations of dipole moment and electronic structure was investigated using density functional theory. The change in electron band structure induced by the polarized electric field was the underlying reason for the generation of hydroxyl radicals. This work will enrich the piezoelectric materials for organics degradation and provide fresh light on the mechanism of mechanically driven piezoelectric catalytic reactions.

Enhanced photocatalytic performance of (Mg, Cu) Dual-Doped ZnS nanosheets for Solar-Driven water treatment and embedded with PVA polymer membrane for reusability

Photocatalysis uses semiconductor materials to solar energy effectively purify to water by eliminating pollutants. Organic Dye degradation serves as a standard to assess the photocatalytic effects of the materials. In this study Mg, Cu dual-doped ZnS nanosheets were synthesized using the coprecipitation method. The impact of the concentration on the structural, morphology, optical, and degradation efficiency was investigated with XRD, XPS, TEM with EDAX, and UV spectroscopy. The pure ZnS and Zn0.98-xCu0.02MgxS (x = 0, 0.01, 0.02) (ZCM1, ZCM2, ZCM3, and ZCM4) nanosheets, exhibited cubic structure with high phase purity. The average crystalline size was calculated as 1.66, 1.60, 1.45, and 1.47 nm for the ZCM1, ZCM2, ZCM3, and ZCM4 nanosheets, respectively. TEM analysis revealed the presence of crumpled nanosheets. The bandgap of the ZCM1, ZCM2, ZCM3, and ZCM4 nanosheets were 3.99, 3.78, 4.03, and 4.09 eV respectively. This study investigated the photocatalytic activity of crystal violet dye when exposed to natural sunlight irradiation. Notably, ZCM3 nanosheets exhibited a high degradation rate of 99 % over 120 min under sunlight. Furthermore, the proposed dye degradation mechanism, effect of dosage, effect of dye variation, reusability, scavenging activity, and hemolytic activity were comprehensively discussed. The nanosheets embedded with the Polyvinyl alcohol (PVA) polymer membrane for reusability.

Oxidation of vegetable waste and organic pollutant degradation to generate energy through microbial fuel cell

Oxidation of vegetable waste and organic pollutant degradation to generate energy through microbial fuel cell

Chloride-mediated transformation of sulfate radicals to hydroxyl radicals for enhanced contaminant degradation in high-temperature wastewater

Using the excess heat in high-temperature industrial wastewater to activate oxidant precursors for organic contaminant degradation would make advanced oxidation processes more sustainable in the context of carbon neutrality, while the salt-mediated radical transformation chemistry in such wastewater is poorly understood. We herein demonstrate that chloride (Cl–) in the range of 0.28–56.34 mM accelerates the degradation of organic contaminants in the heat activated persulfate process in both synthetic and authentic wastewater. We use laser flash photolysis technique together with kinetic modeling to directly determine the bimolecular rate constants of radical–radical (e.g., kSO4·--SO4·- = 2.50 × 109 M−1 s−1), Cl–-radical (e.g., kSO4·--Cl- = 3.75 × 108 M−1 s−1), and radical-contaminant (e.g., kHO·-BA = 1.02 × 1010 M−1 s−1) reactions at 55 °C, which are substantially higher than those at ambient water temperature (25 °C). We also combine experimental and modelling results to calculate the contribution of different radicals to contaminant removal at 55 °C. The results clearly demonstrate that Cl– in the range of 0.28–56.34 mM promotes the transformation of SO4– to HO at 55 °C, with reactive chlorine species involved as the intermediates. The findings improve fundamental understanding of Cl–-mediated radical chemistry in high-temperature water and provide an engineering strategy to recycle the heat in wastewater to enhance contaminant remediation.

Silk fibroin protein and graphene synergistically boosting the reactive oxygen species generation of PU/AgI photocatalytic membrane for tetracycline sustained removal

Solar-light driven organic pollutants degradation by the recyclable photocatalytic membrane materials emerges as a promising technology for sewage purification. However, low generation of reactive oxygen species severely constraints their photocatalytic activity. Herein, we introduce a novel hydrophilic PU/SF/GO/AgI composite photocatalytic membrane fabricated via adding silk fibroin (SF) and graphene oxide (GO) for TC removal. By visible light irradiation, the PU/SF/GO/AgI membrane with 66.7 wt% SF and 0.05 wt% GO degrades TC with 7-fold increase in comparison with the PU/AgI membrane. The enhance photocatalytic activity is primarily attributed to its efficient generation of reactive oxygen species facilitated by the improved hydrophilicity and boosted charge separation. FTIR and electrochemical results demonstrate that the SF and GO with rich surface oxygen-containing groups contribute to the formation of Ag-O bonds for accelerating charge migration and separation. Significantly, the improved hydrophilicity of PU/SF/GO membrane can not only provide rich binging sites for AgI loading, but also be benefitted to attract small molecules for facilitating to reactive oxygen species generation. As a result, •O2−, •OH and H2O2 concentrations produced in PU/SF/GO/AgI membrane system reaches up to 53.20 μmol g−1 h−1, 7.89 μmol g−1 h−1 and 16.52 μmol, respectively, 6.7, 15.4 and 5.1-times higher than PU/AgI membrane system. Meanwhile, under LED irradiation of 12 h, TC degradation efficiency by the dynamic membrane reactor equipped with PU/SF/GO/AgI can reach up to 53 % and achieve 41 % TOC removal, exceeding the pure PU/AgI and those of reported membrane materials. This work proves that tuning hydrophilicity and charge migration of PU membrane can enhance their photocatalytic activity and recyclability, which offers an effective strategy for constructing sustained solar-light driven photocatalytic membrane system.

Effective hydrogen production and coupling degradation of organics (4-nitrophenol, methylene blue, and Rhodamine B) in wastewater by electrospun PAN@Fe0 composite nanofibers

The pursuit of clean energy generation and environmental preservation is of utmost importance for societal progress. However, couple clean energy production and pollution control is still a difficulty. In this study, a novel electrospun composite mat, with nano zero valent iron (Fe0, nZVI) encapsulated into polyacrylonitrile (PAN) nanofibers was acted as a catalyst. The activation energy (Ea) for the hydrolysis of NaBH4 to produce hydrogen is 22 kJ·mol−1, hydrogen atom utilization efficiency (HGE) of NaBH4 is 60.80%. Three kinds of organic dyes 4-nitrophenol (4-NP), methylene blue (MB), and Rhodamine B (RhB) were served as the model pollutant, to construct NaBH4-organic system for energy production and pollution reduction. The NaBH4-organic system demonstrates a collaborative capability to simultaneously remove organic pollutants and generate hydrogen, with a coupling equilibrium point between the two processes. The hydrogen generation rate (HGR) and HGE increased with the concentration of pollutants increased. The degradation of 4-NP, MB, and RhB followed pseudo-first-order kinetics, with RhB degrading dosage 20 and 44 times higher than 4-NP and MB, respectively. H2 and H· contributed to the organic degradation. nZVI directly participated in the formation H2 and H·. PAN@Fe0 possessed good recyclability and moderate cost. The degradation process adhered to the classical surface reaction controlled Langmuir-Hinshelwood (L-H) model. The integration of synergistic production capacity and pollutant degradation aligns well with the principles of green chemistry and sustainable development. This study demonstrates a novel approach to no precursor loss catalysts preparation, efficient production clean H2, advanced treatment of dye-containing wastewater, carbon neutral operation of sewage treatment plant.