Transmission Protocol Research Articles

An Overview of the Current Challenges, Trends, and Protocols in the Field of Vehicular Communication

Intelligent transportation systems (ITS) provides a safe and reliable means of transferring data between vehicles. The document describes the transmission systems, protocols, networks, taxonomy, and applications of Intelligent Systems. Detailed analysis of the existing transmission flow systems is required, including classification, standards, coverage, applications, as well as their advantages and disadvantages. The adaptability of transmission networks, such as ad hoc, hybrid, mobile ad hoc networks (MANET), and Vehicular ad hoc networks (VANETs), has a significant advantage. Described protocols for a variety of communication types, including routing techniques, platforms, structures, and the use of information areas as well. The use of intelligent technology can determine reliable, comfortable, safe, and trustworthy vehicular communication. This paper analyzes the current vehicular communication (VC) research flow and their deployments with indicated areas where further development is necessary. This paper examines how emerging technologies in the upcoming markets will enable the development of high-featured VC technologies. The challenges of improving upon existing VC systems in the development of future systems are discussed in this paper, including medium selection, link and service quality, security, channel characteristics, and mobility. The purpose of this study is to identify the need for the development of improved VC technologies, networks, and protocols for a wide range of applications in the future.

AICP: Augmented Informative Cooperative Perception

Connected vehicles, whether equipped with advanced driver-assistance systems or fully autonomous, require human driver supervision and are currently constrained to visual information in their line-of-sight. A cooperative perception system among vehicles increases their situational awareness by extending their perception range. Existing solutions focus on improving perspective transformation and fast information collection. However, such solutions fail to filter out large amounts of less relevant data and thus impose significant network and computation load. Moreover, presenting all this less relevant data can overwhelm the driver and thus actually hinder them. To address such issues, we present Augmented Informative Cooperative Perception (AICP), the first fast-filtering system which optimizes the informativeness of shared data at vehicles to improve the fused presentation. To this end, an informativeness maximization problem is presented for vehicles to select a subset of data to display to their drivers. Specifically, we propose (i) a dedicated system design with custom data structure and lightweight routing protocol for convenient data encapsulation, fast interpretation and transmission, and (ii) a comprehensive problem formulation and efficient fitness-based sorting algorithm to select the most valuable data to display at the application layer. We implement a proof-of-concept prototype of AICP with a bandwidth-hungry, latency-constrained real-life augmented reality application. The prototype adds only 12.6 milliseconds of latency to a current informativeness-unaware system. Next, we test the networking performance of AICP at scale and show that AICP effectively filters out less relevant packets and decreases the channel busy time.

Multiple RISs Assisted Cell-Free Networks With Two-Timescale CSI: Performance Analysis and System Design

Reconfigurable intelligent surface (RIS) can be employed in a cell-free system to create favorable propagation conditions from base stations (BSs) to users via configurable elements. However, prior works on RIS-aided cell-free system designs mainly rely on the instantaneous channel state information (CSI), which may incur substantial overhead due to extremely high dimensions of estimated channels. To mitigate this issue, a low-complexity algorithm via the two-timescale transmission protocol is proposed in this paper, where the joint beamforming at BSs and RISs is facilitated via alternating optimization framework to maximize the average weighted sum-rate. Specifically, the passive beamformers at RISs are optimized through the statistical CSI, and the transmit beamformers at BSs are based on the instantaneous CSI of effective channels. In this manner, a closed-form expression for the achievable weighted sum-rate is derived, which enables the evaluation of the impact of key parameters on system performance. To gain more insights, a special case without line-of-sight (LoS) components is further investigated, where a power gain on the order of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mathcal {O}(M)$ </tex-math></inline-formula> is achieved, with <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$M$ </tex-math></inline-formula> being the BS antennas number. Numerical results validate the tightness of our derived analytical expression and show the fast convergence of the proposed algorithm. Findings illustrate that the performance of the proposed algorithm with two-timescale CSI is comparable to that with instantaneous CSI in low or moderate SNR regime. The impact of key system parameters such as the number of RIS elements, CSI settings and Rician factor is also evaluated. Moreover, the remarkable advantages from the adoption of the cell-free paradigm and the deployment of RISs are demonstrated intuitively.

LIKA: Lightweight Identity Based Key Agreement Protocol for Secure Data Transmission in Advanced Metering Infrastructure of Smart Grid

Integration of information communication technology via the Internet of Things devices and sensors can enable an efficient power service for utility providers to consumers in advanced metering infrastructure. Authentication and cryptographic mechanisms protect identity, data security and privacy from unauthorised interception for smart meters to servers. In the last couple of years, many key agreement protocols have been prescribed and deployed to fix those issues. Unfortunately, the deployed protocols did not work inside the same protocols, specifically parameter detection and recognition for session key generation, as they entail high computation time and communication bits overheads. Furthermore, the absence of forward secrecy and user anonymity affects the authentication. Therefore, we have proposed a lightweight identity-based key agreement (LIKA) utilising the Diffie–Hellman cryptography with a trusted authority. It seeks to cover both the security and performance criteria with equal weight. The protocol is evaluated by the Canetti and Krawczyk adversarial model, Avispa and cryptographic analysis released the session keys that were not considered as an adversary during mutual authentication. Moreover, as compared to related work, the proposed protocol took the least amount of time (5.319 ms and 1056 bits) for the entire process of session key generation. Furthermore, comparative analysis has shown that the LIKA adequately encompasses computation, communication, and security assessments. Consequently, it is more convenient for practical implementation for a smart grid.

Impact of resolution, colour, and motion on object identification in digital twins from robot sensor data.

This paper makes a contribution to research on digital twins that are generated from robot sensor data. We present the results of an online user study in which 240 participants were tasked to identify real-world objects from robot point cloud data. In the study we manipulated the render style (point clouds vs voxels), render resolution (i.e., density of point clouds and granularity of voxel grids), colour (monochrome vs coloured points/voxels), and motion (no motion vs rotational motion) of the shown objects to measure the impact of these attributes on object recognition performance. A statistical analysis of the study results suggests that there is a three-way interaction between our independent variables. Further analysis suggests: 1) objects are easier to recognise when rendered as point clouds than when rendered as voxels, particularly lower resolution voxels; 2) the effect of colour and motion is affected by how objects are rendered, e.g., utility of colour decreases with resolution for point clouds; 3) an increased resolution of point clouds only leads to an increased object recognition if points are coloured and static; 4) high resolution voxels outperform medium and low resolution voxels in all conditions, but there is little difference between medium and low resolution voxels; 5) motion is unable to improve the performance of voxels at low and medium resolutions, but is able to improve performance for medium and low resolution point clouds. Our results have implications for the design of robot sensor suites and data gathering and transmission protocols when creating digital twins from robot gathered point cloud data.

Analysis of packet transmission protocols for multimedia applications of WBANs in cognitive behavioral therapy

Analysis of packet transmission protocols for multimedia applications of WBANs in cognitive behavioral therapy

Flying-qubit control via a three-level atom with tunable waveguide couplings

The control of flying qubits is at the core of quantum networks. When the flying qubits are carried by single-photon fields, the control involves not only their logical states but also their shapes. In this paper we explore a variety of flying-qubit control problems using a three-level atom with time-varying tunable couplings to two input-output channels. It is shown that one can tune the couplings of a $\mathrm{\ensuremath{\Lambda}}$-type atom to distribute a single photon into the two channels with arbitrary shapes, or use a $\mathrm{\ensuremath{\Lambda}}$-type atom or a $V$-type atom to catch an arbitrary-shape distributed single photon. The $\mathrm{\ensuremath{\Lambda}}$-type atom can also be designed to transfer a flying qubit from one channel to the other, with both the central frequency and the photon shape being converted. With a $\mathrm{\ensuremath{\Xi}}$-type atom, one can shape a pair of correlated photons via cascaded emission. In all cases, analytical formulas are derived for the coupling functions to fulfill these control tasks. Their correlation properties and physical limitations are discussed as well. These results provide useful control protocols for high-fidelity quantum information transmission over complex quantum networks.

Identity Management and Authentication of a UAV Swarm Based on a Blockchain

In recent years, with the continuous development of UAV technology, the application of the UAV swarm in the military has been a global focus of research. Although it can bring a series of benefits in autonomous cooperation, the traditional UAV management technology is prone to hacker attacks due to many security issues, such as a single point of failure brought by centralized management and the lack of reliable identity authentication. This paper studies the advantages and the recent advances of the blockchain in UAV swarm, proposes a blockchain-based UAV swarm identity management model (B-UIM-M), and establishes a distributed identity authentication scheme based on the distributed identity identifier (DID) under this model. Moreover, to ensure the safe transmission of UAV communication data, a secure communication architecture based on blockchain and a set of secure transmission protocols were designed, combined with cryptography. In the current military field, there is no similar application case of the UAV swarm identity management model and distributed identity authentication. The feasibility and security of the proposed scheme are proved through experiments and security analyses.

A LoRaWAN IoT System for Smart Agriculture for Vine Water Status Determination

In view of the actual climate change scenario felt across the globe, resource management is crucial, especially with regard to water. In this sense, continuous monitoring of plant water status is essential to optimise not only crop management but also water resources. Currently, monitoring of vine water status is done through expensive and time-consuming methods that do not allow continuous monitoring, which is especially inconvenient in places with difficult access. The aim of the developed work was to install three groups of sensors (Environmental, Plant and Soil) in a vineyard and connect them through LoRaWAN protocol for data transmission. The results demonstrate that the implemented system is capable of continuous data communication without data loss. The reduced cost and superior range of LoRaWAN compared to WiFi or Bluetooth is especially important for applications in remote areas where cellular networks have little coverage. Altogether, this methodology provides a remote, continuous and more effective method to monitor plant water status and is capable of supporting producers in more efficient management of their farms and water resources.

Service Constraint NCBQ trust orient secure transmission with IoT devices for improved data security in cloud using blockchain

Problem of secure transmission in cloud systems has been well studied; there exist number of approaches discussed around the problem. Number of threats has been identified in cloud which targets the services and data behind them. To mitigate the threats, different approaches are discussed in literature. The most approaches uses behavior of user in measuring trust, and some of them uses data level features in measuring trust of user. Also, various data encryption schemes are discussed which suffer with poor performance in security achievement. To handle this issue, an efficient Service Constraint NCBQ (Network Condition and Behavior Quality) Trust orient secure transmission protocol (SCNCQB-TSTP) is presented in this article. The proposed model involves in secure transmission by analyzing various factors of network, user behavior and quality of service. The method discovers set of routes to reach the service point and fetches several information about the transmission route like traffic, transmission frequency, bandwidth, IoT devices, hop count, throughput, and bandwidth utilization. According to the above information fetched about different routes, the method analyzes the trust of each route in three ways like Network Support Analysis, Behavior Support Analysis and QoS-Support Analysis. Based on the result of different analysis, the method estimates the value of Secure Transmission Score (STS). According to the value of STS, an optimal route has been selected to perform data transmission. Similarly, the method adapts Service Constraint Blockchain Model (SCBM) towards data security, which classifies the services in various levels. According to the service claimed by the user, the service data has been encrypted with specific class of scheme and key. Further, encrypted data has been placed is adapted to block chain to perform data transmission. The proposed SCNCQB-TSTP model improves the performance of secure transmission and data security.

Relay-Assisted Uplink Transmission Design of URLLC Packets

With the emergence and development of mission-critical applications, the design of uplink URLLC transmission has become one of the issues of concern. In this article, we consider the ultrareliable uplink transmission design between multiple robots and a central controller in a smart factory with stringent delay requirements while multiple relays are deployed for cooperative transmission. Subject to the throughput and reliability requirements, a relay-assisted two-phase transmission protocol is proposed aiming at total transmit power minimization by jointly optimizing the decoding error probability, relay selection, resource block (RB) assignment, and transmit power allocation. To support the mission-critical applications in Internet of Things (IoT) with diverse throughput targets and make full use of RBs, we investigate the optimization problem under the single-RB allocation and multi-RB allocation schemes. The problems in these two cases have an analogous structure and can be solved with a unified framework. In the solution framework, we present the optimal design solved by the nonconvex penalty (NCP)- and quadratic penalty (QP)-based successive convex approximation (SCA) algorithms and the corresponding low-complexity design with near-optimal settings of decoding error probabilities. Numerical results demonstrate the effectiveness of the proposed penalty-based iterative algorithms and confirm that the near-optimal design only causes minor power performance loss compared to the optimal design. The power performance gap under these two allocation schemes and the impact of system parameters are revealed and analyzed.

Intelligent Reflecting Surface-Aided LEO Satellite Communication: Cooperative Passive Beamforming and Distributed Channel Estimation

Low-earth orbit (LEO) satellite communication plays an important role in assisting/complementing terrestrial communications by providing worldwide coverage, especially in harsh environments such as high seas, mountains, and deserts which are uncovered by terrestrial networks. Traditionally, the passive reflect-array with fixed phase shifts has been applied in satellite communications to compensate for the high path loss due to long propagation distance with low-cost directional beamforming; however, it is unable to flexibly adapt the beamforming direction to dynamic channel conditions. In view of this, we consider in this paper a new intelligent reflecting surface (IRS)-aided LEO satellite communication system, by utilizing the controllable phase shifts of massive passive reflecting elements to achieve flexible beamforming, which copes with the time-varying channel between the high-mobility satellite (SAT) and ground node (GN) cost-effectively. In particular, we propose a new architecture for IRS-aided LEO satellite communication where IRSs are deployed at both sides of the SAT and GN, and study their cooperative passive beamforming (CPB) design over line-of-sight (LoS)-dominant single-reflection and double-reflection channels. Specifically, we jointly optimize the active transmit/receive beamforming at the SAT/GN as well as the CPB at two-sided IRSs to maximize the overall channel gain from the SAT to each GN. Interestingly, we show that under LoS channel conditions, the high-dimensional SAT-GN channel can be decomposed into the outer product of two low-dimensional vectors. By exploiting the decomposed SAT-GN channel, we decouple the original beamforming optimization problem into two simpler subproblems corresponding to the SAT and GN sides, respectively, which are both solved in closed-form. Furthermore, we propose an efficient transmission protocol to conduct channel estimation and beam tracking, which only requires independent processing of the SAT and GN in a distributed manner, thus substantially reducing the implementation complexity. Simulation results validate the performance advantages of the proposed IRS-aided LEO satellite communication system with two-sided cooperative IRSs, as compared to various baseline schemes such as the conventional reflect-array and one-sided IRS.

Robust Beamforming for Active Reconfigurable Intelligent Omni-Surface in Vehicular Communications

Two key impediments to reconfigurable intelligent surface (RIS)-aided vehicular communications are, respectively, the double fading experienced by the signal on RIS-aided cascaded links and the high-mobility-induced intractability of acquiring channel state information (CSI). To overcome these challenges, a novel kind of RIS is presented in this paper, namely active reconfigurable intelligent omni-surface (RIOS), each element of which is supported by active loads, that concurrently transmits and reflects the incident signal amplified rather than just reflecting it as compared to the case of a passive reflecting-only RIS. We consider the use of an active RIOS to a vehicular communication system for mitigating double fading effect. Specifically, the active RIOS is mounted on the vehicle window to enhance transmission for users in the vehicle and for adjacent vehicles. We aim to jointly optimize the transmit precoding matrix at the base station (BS) and RIOS coefficient matrices to minimize the BS’s transmit power relying exclusively upon the imperfect knowledge of the large-scale CSI. To significantly relax the frequency of channel information updates, initially an efficient transmission protocol is put forward to reap the high active RIOS beamforming gain with low channel training overhead by appropriately tailoring the time-scale of CSI acquisition. Then, two algorithms, namely an alternating optimization (AO)-based algorithm and a constrained stochastic successive convex approximation (CSSCA)-based algorithm, are developed to tackle with the investigated resource allocation problem, whose pros and cons are elaborated, respectively. Simulation results substantiate the significant performance improvement of active RIOS as well as determine the validity and robustness of our proposed algorithms over various benchmark schemes.

Transmission Control Over Satellite Network for Marine Environmental Monitoring System

The transmission of huge amounts of data generated from various sensors is the basis and prerequisite for the analysis and prediction of the marine ecosystem. The special geographical conditions of the ocean determine that its data transmission is different from the common terrestrial data transmission. In this study, a marine environmental monitoring network architecture is proposed to collect environmental data from marine ecosystems using a heterogeneous network constructed by a multi-hop network and a satellite network. Considering the characteristics of satellite networks, such as high bandwidth delay product (BDP), long latency and high bit error rate, this work proposes a transmission scheme that improves the transmission performance of Transmission Control Protocol/Internet Protocol (TCP/IP)-based Internet networks over satellite networks. The improved scheme increases the monitoring data transmission rate, distinguishes between random data loss and congested data loss, rationalizes the threshold in fast recovery, and improves the overall transmission performance of the marine environmental monitoring network. The experimental results show that the proposed scheme can greatly improve the transmission performance of the monitoring network compared with traditional transmission protocols. The network model proposed in this study makes full use of current advanced network technologies, including multi-hop networks, wireless sensor networks, and satellite networks to expand the monitoring area at sea. This study provides a useful reference for the network model and data transmission for ocean monitoring.

Experimental evaluation of multi-PHY 6TiSCH networks

The architectural design of Wireless Sensor Networks (WSNs) for the Industrial Internet of Things (IIoT) applications requires the careful planning and selection of an appropriate operational strategy. Harmonization of standards is crucial to ensure easier certification and commercialization of IIoT solutions. The ongoing research activities are directed toward designing agile, reliable, and secure transmission technologies and protocols. Recently, Time Slotted Channel Hopping (TSCH) standardization bodies have started to consider support for multiple physical layers thus accommodating a wide range of applications. This paper presents the results of the extensive experimental measurement campaign to study the performance of the 6TiSCH (IPv6 over the TSCH mode of IEEE 802.15.4e) network while supporting multiple physical layers (PHYs). For measurement purposes, all experiments were performed on OpenMote-B hardware. These devices are equipped with an Atmel AT86RF215 dual radio transceiver implementing IEEE 802.15.4g. The performance evaluation is provided for the following metrics: network formation time, Packet Delivery Ratio (PDR), latency, and duty cycle. Results are encouraging, particularly in terms of high PDR for all tested PHYs. Performance evaluation indicates the importance of proper node positioning, link quality estimation and careful selection of network parameters. Moreover, collected experimental results create a dataset that provides insights into the tested PHYs' performance and their potential for indoor 6TiSCH networking.

LTE and NB-IoT Performance Estimation Based on Indicators Measured by the Radio Module

Monitoring the operating parameters of power grids is extremely important for their proper functioning as well as for ensuring the security of the entire infrastructure. As the idea of the Internet of Things becomes more ubiquitous, there are tools for monitoring the state of the complex electrical grid and means to control it. There are also developed new measuring devices and transmission technologies allowing for the transfer of performed measurements from many places to the network management center. However, there are still no devices that act as data concentrators, which would integrate many transmission technologies and protocols in one device, supporting the communication between those different transmission technologies and which would realize edge computing to assist the management center by prioritizing and combining transmitted data. In this article, the authors present a device that meets the above-mentioned requirements. There are presented research results leading to the development of a decision algorithm, called Multilink—ML, dedicated to the presented device. This algorithm enables the selection between LTE and NB-IoT interfaces for packet transmission without the need to burden the communication system with additional transmissions.

Performance Analysis and Optimization in Two-Way Cooperative NOMA Under Two-Phase Transmission Protocol

In this article, a novel two-phase transmission protocol is proposed to help the bidirectional transmission in a user-aid two-way cooperative nonorthogonal multiple access system, where superposition coding, bit-level Exclusive-Or operation, and successive interference cancellation (SIC) techniques are employed for improving the spectrum efficiency and throughput. Considering the residual interference generated in the practice process of decoding, both the perfect SIC and the imperfect SIC scenarios are discussed. Besides, the power allocation factor <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\alpha _{1}$</tex-math></inline-formula> and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\alpha _{2}$</tex-math></inline-formula> are optimized under the perfect SIC to reduce the total outage probability, whose closed-form expression is derived and verified by simulations. Also, the approximated outage performance is derived in imperfect SIC scenario. Furthermore, two other conventional two-phase protocols and one three-phase protocol are provided as the benchmark to compare the outage probability and throughput with the proposed protocol, which shows the superiority of the proposed two-phase protocol and power allocation.

Mechanical Vibration Test Based on the Wireless Vibration Monitoring System

In order to apply wireless sensor networks to mechanical vibration monitoring, the author proposes a wireless network topology with multiple data collection points for mechanical vibration monitoring. This structure reduces the transmission load of the data collection point, increases the data transmission rate of the network, balances the energy dissipation in the network, and utilizes the general wireless sensor network hardware platform. The network transmission protocol and related auxiliary mechanisms are designed and implemented, and a wireless vibration monitoring test platform is constructed. The transmission performance of the network structure with multiple data collection points is evaluated through the actual test. The experimental results show that by using the wireless sensor network topology with multiple data collection points, it can meet the requirements of continuous transmission of vibration data obtained by 1 kHz sampling. Conclusion. The system performance of the wireless sensor network based on this network structure has been improved under the condition of general hardware, and the network structure of multiple data collection points shows good performance in the process of high-speed data transmission.

A network business availability modeling method based on Markov chain

Military tactical networks (MTNs) have grown in size and complexity as the volume of battlefield communications business has increased dramatically. There is a critical need for a quantitative evaluation method to assess the performance of MTNs. Based on the transmission characters of battlefield communication business and the availability of communication equipment, this paper proposed a Markov chain-based network steady-state availability model. Using this model and the analysis of the CSMA/CA transmission protocol as preconditions, a delay-based quantitative evaluation model of network business availability is proposed based on statistical principles. The relationship between network business availability and crucial metrics such as node size and node failure/repair ratio is investigated in simulation experiments to ensure the validity and correctness of the proposed model. The work done in this paper contributes to effectively evaluating the overall availability of MTNs in a complex environment.

DB-CMT: A New Concurrent Multi-path Stream Control Transport Protocol

Stream Control Transmission Protocol (SCTP) exploits multiple network interfaces to provide multi-streaming and data chunk ordering in a stream. An extended feature of SCTP, i.e., Concurrent Multi-path Transfer (CMT), bids concurrent data transmission in a multi-path data transfer environment and guarantees bandwidth aggregation, load sharing, robustness, and reliability. In such an environment, the paths usually have distinct characteristics (i.e., delay, Packet Loss Rate (PLR), and bandwidth). Thus, data chunks are received out-of-ordered at the destination. As a result, CMT causes excessive receiver buffer blocking and unnecessary congestion window (cwnd) reductions. Also, during the selection of the retransmission destination path (to resend a lost data chunk), CMT does not take into account vital Quality of Service (QoS) parameters such as the PLR of a path under consideration. This paper introduces a new Delay-Based Concurrent Multi-path Transfer (DB-CMT) approach that transmits data on multiple paths according to their delay. In this scheme, we present a Delay-Based Data chunk Scheduling Policy (DB-DSP), a Retransmission Path Selection Policy (RTX-CL), and a new Delay-Based Fast Retransmission Policy (DB-FRP). The simulation results show that the DB-CMT’s RTX-CL policy performs better than the well-known RTX-CWND and RTX-LOSSRATE retransmission schemes. Also, the overall performance of DB-CMT witnesses improved throughput, fewer timeouts, and reduced File Transfer Time (FTT) performances.