Cycloaddition Research Articles

The Role of N-Substitution in Regio- and Stereoselective Vinylogous Imidonaphthoquinone (VINAquinone) [2 + 2] Photocycloadditions.

Described in this manuscript are intramolecular [2 + 2] photocycloadditions of readily available vinylogous imidonaphthoquinones whose regio- and diastereoselectivity is dependent on the substitution on the vinylogous imide. When exposed to 419 nm light, 2° vinylogous imidonaphthoquinones give novel bridged tetracyclic aza-anthraquinones from a rare crossed [2 + 2] cycloaddition reaction. In contrast, exposure of the corresponding 3° substrates to white light leads to linear adducts. Also outlined here are auxiliary controlled diastereoselective reactions and cyclobutane fragmentations as a means of generating the spirofused γ-lactam moiety present in the ansalactam family of natural product.

Rapid Construction of 18F-Triazolyl-tetrazines through the Click Reaction.

Due to the fast reaction rate, 18F-labeled tetrazines have been widely applied in positron emission tomography (PET) imaging in cancer research and drug discovery. In this work, several functional 18F-triazolyl-tetrazines were rapidly obtained through an optimized copper-catalyzed alkyene-azide cycloaddition reaction system in >99% radiochemical conversions. Notably, the commonly used 18F-labeled azides were isolated through cartridges and directly used for cycloadditions, which greatly simplified the labeling procedure. The assembled triazolyl-tetrazines demonstrated high in vitro stability and reaction kinetics, exhibiting considerable potential for the development of PET agents.

Theoretical Study of the Mechanism of the Formation of Azomethine Ylide from Isatine and Sarcosine and Its Reactivity in 1,3-Dipolar Cycloaddition Reaction with 7-Oxabenzonorbornadiene.

The reaction mechanism of tthe formation of azomethine ylides from isatins and sarcosine is addressed in the literature in a general manner. This computational study aims to explore the mechanistic steps for this reaction in detail and to assess the reactivity of formed ylide in a 1,3-dipolar cycloaddition reaction with 7-oxabenzonorbornadiene. For this purpose, density functional theory (DFT) calculations at the M06-2X(SMD,EtOH)/6-31G(d,p) level were employed. The results indicate that CO2 elimination is the rate-determining step, the activation barrier for 1,3-dipolar cycloaddition is lower, and the formed ylide will readily react with dipolarophiles. The substitution of isatine with electron-withdrawal groups slightly decreases the activation barrier for ylide formation.

Copper and silver nano-schiff base complexes: Efficient catalysts for triazole synthesis and antimicrobial assessment

1,2,3-Triazoles are one of the most important nitrogen-containing five-membered heterocycles and have a wide range of applications in pharmaceuticals, chemical biology, and industry. Therefore, the development of facile and straightforward methodology for the synthesis of 1,2,3-triazoles is of noteworthy interest. Click chemistry represents the most facile, easy and one pot reaction method to synthesize catalyzed azide–alkyne cycloaddition reaction. Nano-scaled bis(2‑hydroxy-1-naphthylmethylidene) ethane-1,2-diamine copperII [CuSB1] and nano-silver ethane-1,2-diamine bis(2-hydroxy-1-naphthylmethylidene) [AgHSB2] complexes where H2SB= 1,2-diamino ethane-N,N’-bis(2-hydroxy-1-naphthylmethylidene), were synthesized utilizing ultrasonic green method. The catalysts were examined by elemental analyses, molar conductance, and spectrophotometric tests. The optimized geometrical structures of H2SB, [CuSB1], [AgHSB2], and HOMO–LUMO representations were performed by Cluster calculations using DMOL3 program. TEM images showed narrower morphology and regular nanostructures of the catalysts. CuSB1] and [AgHSB2] exhibit efficient catalytic activity to prepare different triazoles (3–8). using single-pot selective cycloaddition reaction within very short time and excellent yield without presence of biproducts. The complexes [CuSB1], [AgHSB2] and the triazoles 3, 4, as representative examples, have efficient antimicrobial activity making them promising drugs for treating the bacterial and fungal infections.

A CuSO4/Bicinchoninic acid/Reducing sugar based stable and non-ROS catalyst system for the CuAAC reaction in bioanalysis

The limitations of commonly used sodium ascorbate-based catalyst system for copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction include excess production of reactive oxygen species and rapid catalyst deactivation. In this study instead of using a highly active reducing agent, such as, sodium ascorbate, we chose reducing sugar as a mild reducing agent to build up the catalyst system for CuAAC reaction. Interestingly, the bicinchoninic acid (BCA) assay system containing reducing sugar satisfies the essential elements of the catalyst system for CuAAC reaction. We found that CuSO4/BCA/Reducing sugar system can catalyze the CuAAC reaction but with low yield. Rational analyses of various parameters in CuSO4/BCA/Glucose catalyst system suggested storage at room temperature might enhance the catalytic activity, which was proven to be the case. Importantly, the system remains stable at room temperature and minimal H2O2 was detected. Notably, our study showed that the coordination between the slow reduction of Cu(I) by reducing sugar and the selective chelation of Cu(I) by BCA is key to developing this system. The CuSO4/BCA/Reducing sugar catalyst system was successfully applied to various CuAAC reaction based bioanalyses, and it is suitable for the CuAAC reaction based bioanalyses that are sensitive to ROS or request long reaction time.

Heterogenization of [Ru(bpy)3]Cl2 on Ordered Mesoporous Silica Materials for Photocatalytic Applications

AbstractHerein, the preparation and characterization of three Ru-based heterogeneous photocatalysts supported on ordered mesoporous silica materials are reported. The photocatalytic activity of these catalysts was evaluated through oxidation, reduction, cycloaddition, and carboxylation reactions and their efficiencies are comparable to the parent [Ru(bpy)3]Cl2 under homogeneous conditions. These photocatalysts are efficiently recovered even after five reaction cycles offering new opportunities in sustainable chemistry.

2+1] Cycloadditions Modulate the Hydrophobicity of Ni‐N4 Single‐Atom Catalysts for Efficient CO2 Electroreduction

AbstractMicroenvironment regulation of M‐N4 single‐atom catalysts (SACs) is a promising way to tune their catalytic properties toward the electrochemical CO2 reduction reaction. However, strategies that can effectively introduce functional groups around the M‐N4 sites through strong covalent bonding and under mild reaction conditions are highly desired. Taking the hydrophilic Ni‐N4 SAC as a representative, we report herein a [2+1] cycloaddition reaction between Ni‐N4 and in situ generated difluorocarbene (F2C:), and enable the surface fluorocarbonation of Ni‐N4, resulting in the formation of a super‐hydrophobic Ni‐N4‐CF2 catalyst. Meanwhile, the mild reaction conditions allow Ni‐N4‐CF2 to inherit both the electronic and structural configuration of the Ni‐N4 sites from Ni‐N4. Enhanced electrochemical CO2‐to‐CO Faradaic efficiency above 98 % is achieved in a wide operating potential window from −0.7 V to −1.3 V over Ni‐N4‐CF2. In situ spectroelectrochemical studies reveal that a highly hydrophobic microenvironment formed by the −CF2− group repels asymmetric H‐bonded water at the electrified interface, inhibiting the hydrogen evolution reaction and promoting CO production. This work highlights the advantages of [2+1] cycloaddition reactions on the covalent modification of N‐doped carbon‐supported catalysts.

2+1] Cycloadditions Modulate the Hydrophobicity of Ni-N4 Single-Atom Catalysts for Efficient CO2 Electroreduction.

Microenvironment regulation of M-N4 single-atom catalysts (SACs) is a promising way to tune their catalytic properties toward the electrochemical CO2 reduction reaction. However, strategies that can effectively introduce functional groups around the M-N4 sites through strong covalent bonding and under mild reaction conditions are highly desired. Taking the hydrophilic Ni-N4 SAC as a representative, we report herein a [2+1] cycloaddition reaction between Ni-N4 and in situ generated difluorocarbene (F2C:), and enable the surface fluorocarbonation of Ni-N4, resulting in the formation of a super-hydrophobic Ni-N4-CF2 catalyst. Meanwhile, the mild reaction conditions allow Ni-N4-CF2 to inherit both the electronic and structural configuration of the Ni-N4 sites from Ni-N4. Enhanced electrochemical CO2-to-CO Faradaic efficiency above 98 % is achieved in a wide operating potential window from -0.7 V to -1.3 V over Ni-N4-CF2. In situ spectroelectrochemical studies reveal that a highly hydrophobic microenvironment formed by the -CF2- group repels asymmetric H-bonded water at the electrified interface, inhibiting the hydrogen evolution reaction and promoting CO production. This work highlights the advantages of [2+1] cycloaddition reactions on the covalent modification of N-doped carbon-supported catalysts.

Chiral Brønsted Base Activation of Donor-Acceptor Cyclopropanes toward Diastereo- and Enantioselective [3 + 2] Cycloaddition with Isatin-Derived Ketimines.

Organocatalyzed diastereo- and enantioselective [3 + 2] cycloaddition reactions of donor-acceptor (D-A) cyclopropanes with isatin-derived ketimines are presented. Different from well-developed Lewis acid activation protocols which promote the reactivity of D-A cyclopropanes through coordinating to the acceptor group, in this reaction, dicyanocyclopropylmethyl ketones can be activated through nucleophilic activation of the donor group by using dihydroquinine-derived squaramide as Brønsted base catalyst. The reaction affords functionalized spiro[oxindole-3,2'-pyrrolidines] with two nonadjacent tetra- and tri-substituted stereocenters in 83-99% yields, moderate to excellent diastereoselectivities (up to >20:1 diastereomeric ratio (dr)), and excellent enantioselectivities (up to >99% enantiomeric excess (ee)) under mild conditions.

Enhancing the Lewis acidity of single atom Tb via introduction of boron to achieve efficient photothermal synergistic CO2 cycloaddition

Nowadays, it is becoming increasingly urgent to lower the escalating carbon dioxide (CO2) to reduce greenhouse effect. Fortunately, it is an ideal strategy by using the inexhaustible solar energy as the driving force to manipulate the cycloaddition reaction, the atomic efficiency of which is 100 %. This work represents the first attempt on utilization of rare-earth metal Tb with atomic dispersion, and the structure of Tb coordinated with 4 N-atoms and 2B-atoms was constructed on interconnected carbon hollow spheres. The introduction of electron-deficient B reduces the electron density of Tb, thereby boosting Lewis acidity and promoting the occurrence of ring-opening reaction. The mechanism exploration enunciates that TbN4B2/C is a photothermal synergistic catalyst, the combined action of photogenerated electrons and strong Lewis acidic site of Tb reduces the free energy of the rate-determining step, and then improving the yield of cyclic carbonate up to 739 mmol g-1h−1.

Spectral Assignment in the [3 + 2] Cycloadditions of Methyl (2E)-3-(Acridin-4-yl)-prop-2-enoate and 4-[(E)-2-Phenylethenyl]acridin with Unstable Nitrile N-Oxides

The investigation of cycloaddition reactions involving acridine-based dipolarophiles revealed distinct regioselectivity patterns influenced mainly by the electronic factor. Specifically, the reactions of methyl-(2E)-3-(acridin-4-yl)-prop-2-enoate and 4-[(1E)-2-phenylethenyl]acridine with unstable benzonitrile N-oxides were studied. For methyl-(2E)-3-(acridin-4-yl)-prop-2-enoate, the formation of two regioisomers favoured the 5-(acridin-4-yl)-4,5-dihydro-1,2-oxazole-4-carboxylates, with remarkable exclusivity in the case of 4-methoxybenzonitrile oxide. Conversely, 4-[(1E)-2-phenylethenyl]acridine displayed reversed regioselectivity, favouring products 4-[3-(substituted phenyl)-5-phenyl-4,5-dihydro-1,2-oxazol-4-yl]acridine. Subsequent hydrolysis of isolated methyl 5-(acridin-4-yl)-3-phenyl-4,5-dihydro-1,2-oxazole-4-carboxylates resulted in the production of carboxylic acids, with nearly complete conversion. During NMR measurements of carboxylic acids in CDCl3, decarboxylation was observed, indicating the formation of a new prochiral carbon centre C-4, further confirmed by a noticeable colour change. Overall, this investigation provides valuable insights into regioselectivity in cycloaddition reactions and subsequent transformations, suggesting potential applications across diverse scientific domains.

An Overview of the Synthesis of 3,4-Fused Pyrrolocoumarins of Biological Interest.

3,4-Fused pyrrolocoumarins, synthetically prepared or naturally occurring, possess interesting biological properties. In this review, the synthetic strategies for the synthesis of the title compounds are presented along with their biological activities. Two routes are followed for that synthesis. In one, the pyrrole ring is formed from coumarin derivatives, such as aminocoumarins or other coumarins. In the other approach, the pyranone moiety is built from an existing pyrrole derivative or through the simultaneous formation of coumarin and pyrrole frameworks. The above syntheses are achieved via 1,3-dipolar cycloaddition reactions, Michael reaction, aza-Claisen rearrangement reactions, multi-component reactions (MCR), as well as metal-catalyzed reactions. Pyrrolocoumarins present cytotoxic, antifungal, antibacterial, α-glucosidase inhibition, antioxidant, lipoxygenase (LOX) inhibition, and fluorescent activities, as well as benzodiazepine receptor ability.

Cu‐Catalyzed Synthesis of Coumarin‐1,2,3‐Triazole Hybrids connected with Quinoline or Pyridine Framework**

AbstractCoumarin‐1,2,3‐triazole hybrids connected to quinoline or pyridine framework have been synthesized in good to excellent yield by the 1,3‐dipolar azide alkyne cycloaddition reaction (CuACC) of 4‐azidocoumarin with propargyl quinoline or propargyl pyridine derivatives in the presence of CuSO4.5H2O or CuI as catalyst. Similar reaction of 4‐azidocoumarin or tetrazolo[1,5‐a]pyridine with 4‐propargyloxycoumarin and 4‐propargylaminocoumarin resulted in the synthesis of the corresponding coumarin‐1,2,3‐triazole hybrids. Some preliminary screening test for some biological activities of new compounds have been performed.

Photo- and Stress-Induced Bending of (E)-1,2-Bis(pyridinium-4-yl)ethene Dinitrate Crystals.

We report on the elastic and photodynamic properties of (E)-1,2-bis(pyridinium-4-yl)ethene dinitrate [H2Ebpe](NO3)2, whose needle-like crystals can be reversibly deformed by applying external mechanical stress. The macro-scale mechanical properties of [H2Ebpe](NO3)2 crystals were quantified by a three-point bending test, which gave a stress-strain curve with an elastic modulus of 1.18 GPa, and its values are lower than those of other flexible elastic organic crystals. It can also be reversibly bent through the [2+2] cycloaddition reaction of the olefin moiety, depending on the direction of UV irradiation.

Advances in the Synthesis of Heterocycles with Two and Three Heteroatoms using Hydrazonoyl Halides

AbstractThe review covers the results of studies published in the literature on the use of hydrazonoyl halides in the synthesis of five‐ (pyrazoles, thiazoles, triazoles, oxa‐ and thiadiazoles), six‐ (oxa‐ and thiadiazines, indazoles, pyridazines, pyrazines, tetrazines) or seven‐membered (benzotriazepine) heterocycles. In the formation of these heterocycles, the main intermediate stage of the reaction is the in situ generation of nitrilimine, which enters into a cycloaddition reaction with substituted acetylenes (including in situ generated benzynes, naphthynes), allenes, activated olefins, anthranilic acid derivatives, organosulfur compounds (mercaptoaldehydes, mercaptocarboxylic acids) or with fused heterocycles. Examples are given of the formation of heterocycles by replacing the halogen atom from a hydrazonoyl halide molecule with a nucleophilic group, followed by exhaustive intramolecular cyclization into the target compound. There are discussions of reactions in which the cycloaddition of the nitrilimine to the in situ synthesized Knoevenagel condensation product (from CH‐acid compounds, such as di‐ and monocarbonyl compounds, dinitrile malonic acid) occurs, leading to spiro‐linked or conventional pyrazoles. Some syntheses of biologically active representatives are shown.

Understanding the Impact of Group 14 Elements on the Reactivity of [1 + 2] Cycloaddition Reaction between a Cyclic (Alkyl)(amino)carbene Analogue with a Group 14 Element and a Heavy Acetylene Molecule.

Computational exploration using the density functional theory framework (M06-2X-D3/def2-TZVP) was undertaken to investigate the [1 + 2] cycloaddition reaction between a five-membered-ring heterocyclic carbene analogue (G14-Rea; G14 = group 14 element) and a heavy acetylene molecule (G14G14-Rea). It was theoretically observed that exclusively Si-Rea, Ge-Rea, and Sn-Rea demonstrate the capacity to participate in the [1 + 2] cycloaddition reaction with the triply bonded SiSi-Rea. In addition, only three heavy acetylenes (SiSi-Rea, GeGe-Rea, and SnSn-Rea) can catalyze the [1 + 2] cycloaddition reaction with Si-Rea. Our theoretical findings elucidated that the reactivity trend observed in these [1 + 2] cycloaddition reactions primarily arise from the deformation energies of the distorted G14G14-Rea. Also, our study reveals that the bonding characteristics of their respective transition states are controlled by the singlet-singlet interaction (donor-acceptor interaction), rather than the triplet-triplet interaction (electron-sharing interaction). Additionally, our work demonstrates that the bonding behavior between G14-Rea and G14G14-Rea is predominantly determined by the filled p-π orbital of G14G14-Rea (HOMO) → the empty perpendicular p-π orbital of G14-Rea (LUMO), rather than the vacant p-π* orbital of G14G14-Rea (LUMO) ← the filled sp2 orbital of G14-Rea (HOMO).

Dearomative Intramolecular meta-Thermocycloadditions of Benzene Rings via Wheland Intermediates.

Dearomative cycloadditions are powerful synthetic transformations utilizing aromatic compounds for cycloaddition reactions. They have been extensively applied to the synthesis of biologically relevant compounds not only because of the complexity generated from simplicity but also the atom- and step-economy. For the most studied yet challenging benzene ring systems, ortho- and para-cycloadditions have been realized both photochemically and thermally, while the meta-cycloadditions are still limited to the photochemical processes tracing back to the 1960s. Herein, we for the first time realized the thermal cycloadditions of benzene rings with alkenes in a meta fashion via Wheland intermediates. A broad spectrum of readily available C(sp2)-rich aniline-tethered enynes were transformed into C(sp3)-rich 3D complex polycyclic architectures simply by stirring in TFA. Moreover, the reaction could be performed in gram-scales and the products could be diversely elaborated.

BF3·OEt2-Mediated (3+2) Cycloaddition Reactions of Donor-Acceptor Cyclopropanes (DACs) with Cyanamides: Access to Cyclic Amidines

AbstractA BF3·OEt2-promoted facile synthesis of cyclic amidines (2-amino-1-pyrrolines) has been developed via the (3+2)-cycloaddition of cyanamides with donor-acceptor cyclopropanes (DACs). In addition to this, the protocol has been successfully extended to construct a dimerized amidine derivative and gram-scale synthesis with great efficiency.

Dearomative Intramolecular meta‐Thermocycloadditions of Benzene Rings via Wheland Intermediates

Dearomative cycloadditions are powerful synthetic transformations utilizing aromatic compounds for cycloaddition reactions. They have been extensively applied to the synthesis of biologically relevant compounds not only because of the complexity generated from simplicity but also the atom‐ and step‐economy. For the most studied yet challenging benzene ring systems, ortho‐ and para‐cycloadditions have been realized both photochemically and thermally, while the meta‐cycloadditions are still limited to the photochemical processes tracing back to the 1960s. Herein, we for the first time realized the thermal cycloadditions of benzene rings with alkenes in a meta fashion via Wheland intermediates. A broad spectrum of readily available C(sp2)‐rich aniline‐tethered enynes were transformed into C(sp3)‐rich 3D complex polycyclic architectures simply by stirring in TFA. Moreover, the reaction could be performed in gram‐scales and the products could be diversely elaborated.

Copper catalyzed cycloaddition for the synthesis of non isomerisable 2′ and 3′-regioisomers of arg-tRNAarg

In this report, non-isomerisable analogs of arginine tRNA (Arg-triazole-tRNA) have been synthesized as tools to study tRNA-dependent aminoacyl-transferases. The synthesis involves the incorporation of 1,4 substituted-1,2,3 triazole ring to mimic the ester bond that connects the amino acid to the terminal adenosine in the natural substrate. The synthetic procedure includes (i) a coupling between 2′- or 3′-azido-adenosine derivatives and a cytidine phosphoramidite to access dinucleotide molecules, (ii) Cu-catalyzed cycloaddition reactions between 2′- or 3′-azido dinucleotide in the presence of an alkyne molecule mimicking the arginine, providing the corresponding Arg-triazole-dinucleotides, (iii) enzymatic phosphorylation of the 5′-end extremity of the Arg-triazole-dinucleotides with a polynucleotide kinase, and (iv) enzymatic ligation of the 5′-phosphorylated dinucleotides with a 23-nt RNA micro helix that mimics the acceptor arm of arg-tRNA or with a full tRNAarg. Characterization of nucleoside and nucleotide compounds involved MS spectrometry, 1H, 13C and 31P NMR analysis. This strategy allows to obtain the pair of the two stable regioisomers of arg-tRNA analogs (2′ and 3′) which are instrumental to explore the regiospecificity of arginyl transferases enzyme. In our study, a first binding assay of the arg-tRNA micro helix with the Arginyl-tRNA-protein transferase 1 (ATE1) was performed by gel shift assays.