Cycling Rate Research Articles

Grouping-maintenance of multi-components production system under ecological background

Purpose: The purpose of this paper is to propose an opportunistic group maintenance model for a multi-component series system considering reducing CO2 emission and increasing system efficiency, which establishes a maintenance policy to minimize the cost rate of the system life cycle.Design/methodology/approach: Structural dependence and economic dependence between the components in a multi-component series system are analyzed to make a condition-based maintenance policy. To minimize the cost rate of the system life cycle, clustering theory and two decision variables, which include the preventative maintenance cycle multiplier and basic preventive maintenance interval of each component, is utilized to make an opportunistic policy for system optimal maintenance under the background of increasing energy efficiency and reducing CO2 emissions.Findings: It can be concluded that the government imposes fines on excessive CO2 emissions and energy consumption indicators, which can influence the maintenance decisions of enterprises, promote enterprises to shorten the cycle of preventive maintenance, and avoid excessive CO2 emissions of various components and exceed the indicators as much as possible, so as to enable enterprises to actively save energy, reduce emissions and control carbon emissions. Furthermore, when the single preparation cost of repair maintenance increases, enterprises need to shorten the maintenance period to avoid frequent component failures. As the cost of a single prep for preventive maintenance rises, organizations need to extend maintenance cycles and avoid frequent parts downtime - minimizing their own repair costs.Practical implications: Considering the high maintenance cost and low energy efficiency of multi-component systems, this model assists production managers to have better maintenance of these systems.Originality/value: 1.Model innovation: comprehensive consideration of two variables in the selection of decision variables for preventive maintenance or opportunistic maintenance; The selection and synthesis of ecological factors when making ecologically conscious maintenance decisions for multi-component systems make up for the gaps of single variables and one-sided indicators in previous studies and models. 2. Methodological innovation: In the identification of opportunity maintenance, the idea of clustering is first combined; In the simulation analysis, genetic algorithm is used to obtain the optimal parameters quickly and accurately. A blend of management, statistics, biology and computer science.

A tartaric acid (TA)-coated iron-based biochar as heterogeneous fenton catalyst for enhanced degradation of dibutyl phthalate

Iron-biochar composite is a promising catalyst in Fenton-like system for removal of organic pollutants. Nevertheless, low cycling rate of Fe(III)/Fe(II), high iron leaching and low H2O2 utilization efficiency impedes its application. Herein, a iron-based biochar (C-Fe) coated with tartaric acid (TA) was synthesized. The specific structure of inherent graphitized carbon and TA coating improved the removal efficiency of dibutyl phthalate (DBP) to 93%, promoted 2-fold increase in HO• production in H2O2 activation, improved the cycling rate of Fe(III)/Fe(II), and mitigated Fe leaching significantly. The developed HO• and 1O2 dominated Fenton-like system had an excellent pH universality and anti-interference to inorganic ions and real water matrixes. Moreover, C-Fe-TA has been shown to efficiently degrade DBP by using the dissolved oxygen in water to generate HO•. This work provided a novel insight for sustainable and efficient HO• and 1O2 generation, which motivated the development of new water treatment technology based on efficient iron-biochar catalyst.

Three-dimensional CNTs boosting the conductive confinement structure of silicon/carbon anodes in lithium-ion batteries

In this study, a surface functionalization strategy was proposed to involve carbon nanotubes and silicon nanoparticles encapsulated within carbon derived from a zeolite imidazole framework (ZIF-67). Multidimensional interconnected carbon nanotubes bolster the structural stability and facilitate ion/electron transfer within silicon/carbon composites. Silicon nanoparticles were successfully encapsulated in ZIF-67-derived carbon shells, with carbon nanotubes effectively transferring interfacial stress between silicon and carbon shell during lithiation, where ZIF-67-derived carbon reduces the volume expansion in silicon anodes. As a consequence, the outstanding cycle life and rate performance were demonstrated in the silicon/carbon composites. The specific capacity was maintained at 660 mAh g-1 over 200 cycles at 1 A g-1. The in-situ construction of this conductive confinement structure based on three-dimensional carbon nanotubes offers a promising design approach for advancing silicon/carbon anode technologies.

Synergetic benefits of zinc antimony oxide/reduced graphene oxide hybrid anode for enhanced sodium-ion storage

Organic-inorganic hybrid nanocomposites are rapidly evolving as a new generation of materials with attractive properties for electrochemical energy storage. Unfortunately, their practical applications in sodium-ion batteries (SIBs) still require further research due to the unsatisfactory cycling stability and rate performance. This work explores using zinc antimony oxide/reduced graphene oxide (ZSO/rGO) hybrid nanocomposite as an anode material in SIBs. After 150 cycles at 0.05 A g−1, the ZSO/rGO electrode delivers a specific capacity of 357.21 mAh g−1 with a coulombic efficiency of 99.3 %, which is almost 2.5-fold higher than the specific capacity of the pristine ZSO electrode. An in-situ Raman spectroscopy study demonstrates that the sodiation/desodiation mechanism in the ZSO/rGO electrode involves the conversion and alloying reactions in the ZSO nanoparticles. Further electrochemistry analysis reveals that the nanocomposite anode shows synergistic effects by coupling diffusion and surface contribution, in which the latter plays an important role.

Facilitating superior electrochemical efficacy and ultra rapid kinetic in Co/Ni-free layered oxides for sodium-ion batteries with phosphate-growing layer fast ion conductors

Co/Ni-free layered oxides have garnered significant interest due to their environmental friendliness and facile synthesis methodologies, while facing major challenges of inferior cycling stability and rate capability. Addressing these drawbacks necessitates the enhancement of the surface properties of Co/Ni-free layered oxides. This work introduces a Co/Ni-free layered oxide, Na0.67Mn0.65Fe0.3Al0.05O2 (NMFA), which has been subjected to phosphate-based surface engineering. This targeted surface modification aims to augment the specific surface area and establish a protective layer on NMFA. Such improvements are critical for expanding the effective electrochemical reaction zone, broadening sodium ion diffusion pathways, curtailing the P2-OP4 phase transition, and reducing the activation energy for interfacial charge transfer. This multifaceted surface treatment epitomizes the ingenious design and realization of advanced Co/Ni-free layered oxide cathode materials through straightforward processing techniques. Notably, the NMFA subjected to 3%-AlPO4 surface modification demonstrated an initial discharge capacity of 189.1 mAh/g at 0.1C, maintaining its capacity after 500 cycles at 10C. Additionally, DFT calculations corroborate that such surface growth can bolster electrical conductivity, restrain oxygen liberation and foster sodium ion migration. This elucidates that the phosphate growth layer serves as the oxygen reservoir. Accordingly, this investigation propounds a promising avenue to circumvent the challenges confronting Co/Ni-free layered oxides, thus paving the way for the development of high-performance cathode materials.

Effect of estradiol supplementation on luteal support following a significant reduction in serum estradiol levels after hCG triggering: a prospective randomized controlled trial

ObjectiveThis study aimed to evaluate the impact of adding 4 mg estradiol valerate to progesterone for luteal support on pregnancy rates in IVF cycles following a long protocol with reduced luteal serum estradiol levels post-hCG triggering.Design, setting, and participantsThe prospective randomized controlled trial was conducted at a public tertiary hospital reproductive center with 241 patients who experienced a significant decrease in serum estrogen levels post-oocyte retrieval.InterventionsParticipants received either a daily 4 mg dose of estradiol valerate in addition to standard progesterone or standard progesterone alone for luteal support.ResultsThe ongoing pregnancy rate did not show a significant difference between the E2 group and the control group (56.6% vs. 52.2%, with an absolute rate difference (RD) of 4.4%, 95% CI -0.087 to 0.179, P = 0.262). Similarly, the live birth rate, implantation rate, clinical pregnancy rate, early abortion rate, and severe OHSS rate were comparable between the two groups. Notably, the E2 group had no biochemical miscarriages, contrasting significantly with the control group (0.0% vs. 10.7%, RD -10.7%, 95% CI -0.178 to -0.041, P = 0.000). In the blastocyst stage category, the clinical pregnancy rate was notably higher in the E2 group compared to the control group (75.6% vs. 60.8%, RD 14.9%, 95% CI 0.012 to 0.294, P = 0.016).ConclusionAdding 4 mg estradiol valerate to progesterone for luteal support does not affect the ongoing pregnancy rate in embryo transfer cycles using a long protocol with a significant decrease in serum estradiol levels after hCG triggering. However, it may reduce biochemical miscarriages and positively impact clinical pregnancy rates in blastocyst embryo transfer cycles.Trial registrationChiCTR1800020342.

Synergistic Enhancement of Biaxial Stretching and Multilayer Composites in All-Solid-State Polymer Electrolytes.

As an important component of lithium-ion batteries, all-solid-state electrolytes should possess high ionic conductivity, excellent flexibility, and relatively high mechanical strength. All-solid-state polymer electrolytes (ASSPEs) based on polymers seem to be able to meet these requirements. However, pure ASSPEs have relatively low ionic conductivity, and the addition of inorganic fillers such as lithium salts will reduce their flexibility and mechanical strength. To address the above issues, in this paper, the solvent-free method was used to prepare a poly(vinylidenefluoride-co-hexafluoropropylene)/lithium bis(trifluoromethanesulfonyl) imide/poly(ethylene oxide) all-solid-state polymer electrolyte, which was then subjected to 4 × 4 magnification synchronous bidirectional stretching. Subsequently, it was multilayered with PEO-based composite polymer electrolytes to obtain multilayered composite polymer electrolytes (MCPEs). Bidirectional stretching provides superior in-plane and out-of-plane mechanical properties to MCPEs by inducing molecular chain orientation, which suppresses the growth of lithium dendrites. Concurrently, it facilitates the formation of the β-crystal form of PVDF-HFP, thereby weakening the ion solvation effect and reducing the lithium-ion migration energy barrier. Multilayered compounding improves the interfacial contact between MCPEs and electrodes, thereby reducing the interfacial impedance. Experiments have demonstrated that the MCPEs prepared in this paper exhibit high ionic conductivity at room temperature (1.83 × 10-4 S cm-1), low interfacial resistance (547 Ω cm-2), excellent mechanical properties (26 MPa), and excellent cycling rate performance (a capacity retention rate of 90% after 110 cycles at 0.1 C), which can meet the performance requirements of lithium-ion batteries for ASSPEs.

Comparison of ultra-long gonadotropin releasing hormone agonist versus standard downregulation in women with adenomyosis undergoing frozen-thawed embryo transfer: a randomized clinical trial

BackgroundAdenomyosis can lead to infertility and failure of in vitro fertilization. Limited evidence suggests that the use of long-term treatment with gonadotropin-releasing hormone (GnRH) agonists followed by frozen-thawed embryo transfer (FET) may be the preferred approach for women with adenomyosis.ObjectiveThe aim of this randomized controlled trial is to compare the efficacy of an ultra-long GnRH agonist with standard downregulation in women with adenomyosis undergoing FET.Materials and methodsThis randomized controlled trial enrolled 72 women with adenomyosis diagnosed by sonographic criteria who underwent FET cycles at the Avicenna Infertility Center. These women were randomly assigned to two equal groups: one received GnRH agonist treatment for three months before the FET cycle and the other served as the standard downregulation group. Results were reported as chemical and clinical pregnancy rates.ResultsThe two groups were similar in age, body mass index, anti-Müllerian hormone levels, number of previous pregnancies and miscarriages, presence of uterine myomas, and endometriosis. However, the total dose of estradiol used until embryo transfer was significantly higher in the ultra-long GnRH agonist group than in the standard group (96.14 mg vs. 80.52 mg, p-value = 0.004). Nevertheless, chemical and clinical pregnancy rates did not differ significantly between the two groups.ConclusionsUltra-long GnRH agonist downregulation did not improve the chemical and clinical pregnancy rate in the FET cycle in women with adenomyosis compared with standard GnRH agonist downregulation in the other words, ultra-long GnRH agonist downregulation is not superior to standard protocol. In women with adenomyosis (without history of endometriosis), downregulation of standard GnRH agonists prior to frozen-thawed embryo transfer may be the preferred embryo transfer protocol to gain higher clinical/chemical pregnancy rate.Trial registrationClinical trial registry: IRCT20160717028967N9, available at: https://irct.behdasht.gov.ir/trial/36103.

Biomimetic Soft Robotic Jellyfish for Lentic Ecosystem Monitoring

Environmental monitoring of lentic ecosystems is well suited for swarm robotics applications since they can operate autonomously and cover large regions. For such a task, a locomotion mechanism is necessary for traversal. Due to the challenging nature of underwater environments, researchers often draw inspiration from nature to improve robot mechanical performance. A box jellyfish in a good inspiration due to their efficient jet propulsion. Soft and smart materials are helpful in mimicking their propulsion because they can perform flexible and complex movement. Shape memory alloy (SMA) springs have been used for this purpose, but their slow actuation rate is a well-known disadvantage. This project aims to improve cycle rate and thus swim speed by implementing a bistable spring configuration into a soft robotic jellyfish. The bistable mechanism stores energy slowly in the expansion of the elastic silicone bell, then releases it suddenly in a contraction which propels the robot forwards with a higher force than would be possible with direct SMA actuation. Additionally, the antagonistic arrangement of SMA springs reset each other and produce the same outward expansion on both up and down stroke, improving cycles speeds by removing the need for a dedicated reset stroke which is typically required before using the springs again. Also, increasing the number of spring pairs does not interfere with the actuation, meaning cycle rates can be further improved by cycling which pair of springs is active. The proof-of-concept device operates at a frequency of 0.4 Hz, and produces enough thrust while tethered to swim through a tank. Future work involves performing fluid visualization tests to validate a simple mathematical model of flow through the bell, as well as optimize the design, integrate onboard environment sensors and implement autonomy to allow operation in a larger swarm.

Internal Space Modulation of Yolk-Shell FeSe2@Carbon Anode with Peanut-Shaped Morphology Enabling Ultra-Stable and Fast Potassium-Ion Storage.

The poor cycling stability and rate performance of transition metal selenides (TMSs) are caused by their intrinsic low conductivity and poor structural stability, which hinders their application in potassium-ion batteries (PIBs). To address this issue, encapsulating TMSs within carbon nanoshells is considered a viable strategy. However, due to the lack and uncontrollability of internal void space, this structure cannot effectively mitigate the volume expansion induced by large K+, resulting in unsatisfactory electrochemical performance. Herein, peanut-shaped FeSe2@carbon yolk-shell capsules are prepared by modulation of the internal space. The active FeSe2 is encapsulated within a robust carbon shell and an optimal void space is retained between them. The outer carbon shell promotes electronic conductivity and avoids FeSe2 aggregation, while the internal void mitigates volume expansion and effectively ensures the structural integrity of the electrode. Consequently, the FeSe2@carbon anode demonstrates exceptional rate performance (242 mAh g-1 at 10 A g-1) and long cycling stability (350 mAh g-1 after 500 cycles at 1 A g-1). Furthermore, the effect of internal space modulation on electrochemical properties is elucidated. Meanwhile, ex situ characterizations elucidate the K+ storage mechanism. This work provides effective guidance for the design and the internal space modulation of advanced TMSs yolk-shell structures.

Layered 3d Transition Metal‐Based Oxides for Sodium‐Ion and Lithium‐Ion Batteries: Differences, Links and Beyond

AbstractDue to their stable crystal framework, promising energy density, and structural versatility, layered 3d transition metal oxides have emerged as the preferred cathodes for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs). While extensive research has individually addressed the lithium and sodium 3d transition metal layered oxides, the differences and interconnections between the two types of materials have largely been overlooked. Effectively utilizing these summaries is essential for driving innovative structural designs and inspiring new insights into the structure‐property relationships. This review comprehensively bridges this gap by meticulously examining the disparities and links in the behavior of the layered oxides upon Li+ and Na+ storage and transfer. Key aspects, including atomic and electronic structure, phase transition mechanisms, charge compensation mechanisms and electrochemical kinetics, are carefully summarized. The implications of these aspects on the battery cycle life, energy density, and rate capability are thoroughly discussed. Additionally, by leveraging the unique characteristics of each oxide structure, this review explores the interconnection between lithium and sodium layered oxides in depth. Finally, a concise perspective on future targets and direction of 3d layered oxides is deduced and proposed.

Co‐Based Metal–Organic Frameworks With Dual Redox Active Centers for Lithium‐Ion Batteries With High Capacity and Excellent Rate Capability

AbstractSmall molecule organic materials are widely used as anode materials for lithium‐ion batteries (LIBs) due to their high reversible capacity, designable structure, and environmental friendliness. However, they suffer from poor intrinsic electronic conductivity, severe dissolution, and low initial coulombic efficiency. Recently, metal–organic frameworks (MOFs) have demonstrated in metal‐ion batteries, outperforming some small molecule organic materials in terms of both cycling stability and rate capability. Herein, the first rational design and synthesis of a new cobalt‐based MOF (CoBPDCA), are reported employing cobalt(II) nitrate as the metal source and small organic molecules (2,2‐bipyridyl‐4,4‐dicarboxylic acid, BPDCA) as the ligands, which shows exceptional chemical stability and impressive electron conductivity. Most importantly, CoBPDCA electrodes deliver a high reversible capacity of 1112.9 mAh g−1 at 0.05 C (1 C = 1000 mA g−1) and outstanding high‐rate durability (166.3 mAh g−1 after 2500 cycles at 10 C). Employing a series of spectroscopic and morphological characterizations and density functional theory (DFT) calculations, it is revealed that these impressively electrochemical performances are contributed to the dual active redox centers of Co cations and BPDCA ligands (CN and CO groups), and the superb electron conductivity. This work might provide a new strategy and a deeper understanding of the other MOFs' development for LIBs.

The Hox Gene, abdominal A controls timely mitotic entry of neural stem cell and their growth during CNS development in Drosophila.

The size of a cell is important for its function and physiology. Interestingly, size variation can be easily observed in clonally derived embryonic and hematopoietic stem cells. Here, we investigated the regulation of stem cell growth and its association with cell fate. We observed heterogeneous sizes of neuroblasts or neural stem cells (NSCs) in the Drosophila ventral nerve cord (VNC). Specifically, thoracic NSCs were larger than those in the abdominal region of the VNC. Our research uncovered a significant role of the Hox gene abdominal A (abdA) in the regulation of abdominal NSC growth. Developmental expression of AbdA retards their growth and delays mitotic entry compared to thoracic NSCs. The targeted loss of abdA enhanced their growth and caused an earlier entry into mitosis with a faster cycling rate. Furthermore, ectopic expression of abdA reduced the size of thoracic NSCs and delayed their entry into mitosis. We suggest that abdA plays an instructive role in regulating NSC size and exit from quiescence. This study demonstrates for the first time the involvement of abdA in NSC fate determination by regulating their growth, entry into mitosis and proliferation rate, and thus their potential to make appropriate number of progeny for CNS patterning.

Angiogenic factor-driven improvement of refractory thin endometrium with autologous platelet-rich plasma intrauterine infusion in frozen embryo transfer cycles.

A beneficial effect on endometrial thickness (EMT) and improvement of pregnancy outcome after intrauterine infusion of platelet-rich plasma (PRP) has been suggested. This study assessed the effect of intrauterine PRP infusion on live birth rate and obstetrical outcomes and analyzed cytokines that can potentially improve pregnancy outcomes through PRP. This study was a prospective cohort study conducted in a university hospital fertility center. The study included ninety-one patients who had a history of two or more failed in vitro fertilization (IVF) attempts and refractory thin endometrium that remained unresponsive after at least two conventional treatments for thin endometrium. Patients were treated with an intrauterine infusion of autologous PRP between days 7 and 14 of their hormone replacement therapy-frozen embryo transfer (HRT-FET) cycle. PRP was administered at 3-day intervals until their EMT reached 7mm. After a maximum of three PRP administrations, embryo transfer (ET) was performed. The primary outcome was the live birth rate. Secondary outcomes included the implantation rate and increase in EMT compared to the previous cycle. We compared the cytokines related to angiogenesis in a patient's whole blood (WB) and PRP by utilizing a commercial screening kit. The live birth rate in the PRP treatment cycle was 20.9% (19 of 91 patients), significantly superior to the previous cycle without PRP infusion (p < 0.001). The implantation rate was also significantly higher during the PRP treatment cycle (16.4%) compared to the previous cycle (3.1%) (p < 0.001). The mean EMT post-PRP treatment was 6.1 mm, showing a significant increase of 0.8 mm (p < 0.001). Nonetheless, an increase in EMT was also observed in the non-pregnancy group. No adverse effects were reported by patients treated with autologous PRP. Cytokine array analysis confirmed marked increases in well-known pro-angiogenic factors such as Ang-1, EGF, LAP (TGF-b1), MMP-8, PDGF-AA, and PDGF-AB/PDGF-BB. Intrauterine PRP infusion offers a safe and effective treatment for patients with refractory thin endometrium and implantation failures. The angiogenic cytokines present in PRP are the primary drivers of this improvement.

Nutrient Dynamics in Integrated Crop–Livestock Systems: Effects of Stocking Rates and Nitrogen System Fertilization on Litter Decomposition and Release

Current fertilizer recommendations often neglect nutrient cycling across crop rotations. This study aimed to assess the decay rate and nutrient (N, P, K) release patterns of sorghum, black oat, and corn residues (omitido) in an integrated crop–livestock system. The experiment used factorial treatments based on two sward heights (high and low) and two nitrogen fertilization levels (N-pasture at 200 kg N ha−1 and N-corn at 0 kg N ha−1). Litter bags were collected at various intervals from each crop to measure nutrient release patterns and decomposition rates. The results showed that pasture height and nitrogen fertilization significantly influenced decomposition and nutrient release, affecting the subsequent grain crop phase. Potassium was released rapidly and in high amounts. Nitrogen fertilization during the pasture phase prevented nitrogen and phosphorus immobilization in black oat residue and reduced immobilization in corn residue. These findings highlight the importance of accounting for nutrient cycling and decomposition rates in fertilization strategies to enhance the sustainability of integrated crop–livestock systems.

Rescue ICSI Improved Cumulative Live Birth Rate for Cycles with Second Polar Body Extrusion Rate

ObjectiveTo determine the indications for early rescue intracytoplasmic sperm injection (ICSI) application. DesignA retrospective cohort study SubjectsThe study included 19,808 patients who underwent conventional in vitro fertilization (IVF) or rescue ICSI for their first cycles between February 2017 and December 2021. ExposureRescue ICSI cycles constituted the study group, where oocytes that had not extruded the second polar body 4-6 hours after insemination were rescued by ICSI. The control group consisted of conventional IVF cycles with no interventions to rescue oocytes without the second polar body. Generalized additive models (GAMs) were constructed to describe the relationship between the second polar body extrusion rate and cumulative live birth rate in conventional IVF and rescue ICSI cycles, respectively. The cutoff value of the second polar body extrusion rate guiding rescue ICSI application was determined from the intersection point of GAMs. Maternal age range applicable to rescue ICSI was further analyzed using the same method. Clinical outcomes were compared between conventional IVF and rescue ICSI cycles across different second polar body extrusion rate and maternal age subgroups. Main outcome measuresThe second polar body extrusion rate and maternal age range for rescue ICSI application, normal fertilization rate, and cumulative live birth rate. ResultsGAMs showed that the cutoff value for the second polar body extrusion rate about rescue ICSI application was 50%. When the rate <50%, normal fertilization rate and cumulative live birth rate (63.7% vs. 46.1%, OR: 1.609, 95% CI: 1.276-2.030) were significantly higher in rescue ICSI cycles than conventional IVF cycles. When the rate ≥50%, rescue ICSI cycles had similar normal fertilization rate and cumulative live birth rate compared to conventional IVF cycles. Further analysis on maternal age in cycles with second polar body extrusion rate <50% released that rescue ICSI cycles showed a higher cumulative live birth rate (67.7% vs. 48.3%, OR: 1.732, 95% CI: 1.361-2.202) than conventional IVF cycles for women aged < 38 years. ConclusionIVF cycles with second polar body extrusion rate <50% in women aged < 38 years was applicable to early rescue ICSI.

Assessing the effect of below-benchmark vitrified/warmed donor-oocyte survival rates in subsequent laboratory and clinical outcomes

To assess the impact of below-benchmark (95-100%) donor oocyte survival rates to vitrification/warming in the laboratory and clinical outcomes of recipient cycles. Retrospective cohort study. We analyzed 12690 vitrified-warmed donor oocyte recipient cycles carried out in a network of European private IVF units from 2018-2022. All cycles analyzed used exclusively vitrified/warmed donor oocytes. The cycles were grouped according to the survival rate experienced: benchmark 95-100%; competence 85-95%; below-competence 70-85%; poor 50-70%; very poor <50%. The primary endpoint of the study was the total usable blastocyst rate per 2PN zygote. Secondary endpoints were the fertilization rate, the live birth rate after the first single blastocyst transfer, and the cumulative live birth rate. The mean number of warmed oocytes per ICSI cycle was 11.4±3.2 with a mean survival rate of 89.1%. More oocytes per cycle were consumed in the lower survival groups, yet the total oocytes available for ICSI was smaller in the below-competence, poor and very-poor survival groups. The total usable blastocyst rate was lower in the lower survival groups (benchmark: 48.9%; competence: 47.0%, below-competence: 46.0%; poor: 43.6%; very-poor:43.6%, p<0.001), as well as the fertilization rates (benchmark: 76.8%; competence: 76.6%, below-competence: 75.6%; poor: 74.7%; very-poor:75.5%, p<0.001). The adjusted relative risk of live-birth rate of the first embryo transferred was equal to the benchmark survival group in all the lower survival groups (Benchmark: 40.9%; Competence: RR=0.986, 95%CI:0.931-1.045; below-competence: RR=0.992, 95%CI:0.929-1.059; poor: RR=1.103, 95%CI:1.009-1.207; and very-poor: RR=1.169, 95%CI:0.963-1.419). The cumulative live-birth rate decreased in lower survival groups compared to benchmark survival (Benchmark: 79.2%; Competence: RR=0.988, 95%CI:0.961-1.015; below-competence: RR=0.911, 95%CI:0.880-0.944; poor: RR=0.802, 95%CI: 0.757-0.851; and very-poor: RR=0.793, 95%CI: 0.693-0.907). The lower cumulative rates maintained in a sub-analysis with equal M-II available for ICSI (Benchmark: 69.5%; Competence: RR=0.909, 95%CI:0.827-1.000; below-competence: RR=0.942, 95%CI:0.848-1.046; poor: RR=0.833, 95%CI:0.7386-0.941; and very-poor: RR=0.873, 95%CI:0.695-1.097). Lower donor-oocyte cryo-survival rates have a moderate negative impact on the blastocyst utilization rate per 2PN zygote, fertilization rate and the cumulative live-birth rates of a donation cycle, even after adjusting for equal M-II oocytes available for ICSI. Nonetheless, the surviving oocytes of a cohort seem to maintain a high competence level, with very similar laboratory outcomes, irrespectively of the cohort's survival rates, as well as equal implantation potential of the resulting blastocysts.

Homogeneous Fluorine Doping toward Highly Conductive and Stable Li10GeP2S12 Solid Electrolyte for All-Solid-State Lithium Batteries.

The unique structure and exceptionally high lithium ion conductivity over 10mScm-1 of Li10GeP2S12 have gained extensive attention in all-solid-state lithium batteries. However, its poor resistivity to moisture and chemical/electrochemical incompatibility with lithium metal severely impede its practical application. Herein, a fluorine functionalized Li10GeP2S12 is synthesized by stannous fluoride doping and employed as a monolayer solid electrolyte to realize stable all-solid-state lithium batteries. The atomic-scale mechanism underlying the impact of fluorine doping on both moisture and electrochemical stability of Li10GeP2S12 is revealed by density functional theory calculations. Fluorine surface doping significantly reduces surface hydrophilicity by electronic regulation, thereby retarding the hydrolysis reaction of Li10GeP2S12. After exposed to a relative humidity of 35%-40% for 20min, the ionic conductivity of Li9.98Ge0.99Sn0.01P2S11.98F0.02 maintains as high as 2.21mScm-1, nearly one order of magnitude higher than that of Li10GeP2S12 with 0.31mScm-1. Meanwhile, bulk doping of highly electronegative fluorine promotes the formation of lithium vacancies in the Li10GeP2S12 system, thus allowing stable lithium plating/stripping in Li | Li symmetric batteries, boosting a critical current density reaching 2.1mAcm-2. The LiCoO2 | lithium all-solid-state batteries display improved cycling stability and rate capability, showing 80.1% retention after 600 cycles at 1C.

Zein protein-functionalized separator through a viable method for trapping polysulfides and regulating ion transport in Li[sbnd]S batteries

Commercialization of lithium‑sulfur (LiS) batteries as a promising energy storage system, is primarily impeded by polysulfide shuttling and uncontrollable lithium dendrite growth. To address the issues for improving the performance of LiS batteries, we decorate the separator with zein (corn protein) via a simple soaking process. Owing to strong zein–polysulfide interactions, the zein-soaked separator effectively enhances the polysulfide-trapping capability. Moreover, abundant functional groups of zein also stabilize Li-ion deposition, and thus suppresses the growth of Li dendrites. As a result, the resulting LiS batteries exhibited enhanced electrochemical performance in terms of cycling stability, capacity retention, and rate capability. The soaking method used for coating zein on pristine separator offers a scalable solution for generating multifunctional separators toward commercialization.

Nanotechnology-Enabled PCR with Tunable Energy Dynamics.

This Perspective elucidates the transformative impacts of advanced nanotechnology and dynamic energy systems on the polymer chain reaction (PCR), a cornerstone technique in biomedical research and diagnostic applications. Since its invention, the optimization of PCR-specifically its efficiency, specificity, cycling rate, and detection sensitivity-has been a focal point of scientific exploration. Our analysis spans the modulation of PCR from both material and energetic perspectives, emphasizing the intricate interplay between PCR components and externally added entities such as molecules, nanoparticles (NPs), and optical microcavities. We begin with a foundational overview of PCR, detailing the basic principles of PCR modulation through molecular additives to highlight material-level interactions. Then, we delve into how NPs, with their diverse material and surface properties, influence PCR through interface interactions and hydrothermal conduction, drawing parallels to molecular behaviors. Additionally, this Perspective ventures into the energetic regulation of PCR, examining the roles of electromagnetic radiation and optical resonators. We underscore the advanced capabilities of optical technologies in PCR regulation, characterized by their ultrafast, residue-free, and noninvasive nature, alongside label-free detection methods. Notably, optical resonators present a pioneering approach to control PCR processes even in the absence of light, targeting the often-overlooked water component in PCR. By integrating discussions on photocaging and vibrational strong coupling, this review presents innovative methods for the precise regulation of PCR processes, envisioning a new era of PCR technology that enhances both research and clinical diagnostics. The synergy between nanotechnological enhancements and energy dynamics not only enriches our understanding of PCR but also opens new avenues for developing rapid, accurate, and efficient PCR systems. We hope that this Perspective will inspire further innovations in PCR technology and guide the development of next-generation clinical detection instruments.