Cyclic Compounds Research Articles

Type of Tetrahydronaphthalene-Fused 1,5-Dipoles and Their Application in Polycyclic Compounds Synthesis.

Palladium-catalyzed dipolar cycloaddition reactions represent an efficient strategy for the construction of cyclic compounds, with the development of novel dipolar precursors being a key focus. In this study, a new type of dipolar precursor was synthesized through the assembly of the vinylethylene carbonate unit and the tetrahydronaphthalene skeleton. This dipolar precursor can undergo [3 + 2], [5 + 4], and [5 + 2] cycloaddition reactions, leading to the construction of tetrahydronaphthalene-fused oxazolidin-2-ones, 1,5-oxazonines, and tetrahydrooxepines. In general, all of these reactions exhibited good reaction efficiency and functional group tolerance.

Intramolecular lactam cross-linking of short oligoureas.

Oligourea foldamers are known to fold into 2.5-helices, stabilized by three-centered hydrogen bonds, which makes them conformationally more rigid than peptides. Nevertheless, the folding propensity and conformational stability in solution depend on the length of the oligomer, as well as the temperature, solvent, and so forth. In the peptide field, there are many approaches known for constraining the backbone in the folded conformation, including the stapling of side chains by disulfide bridges, lactam formation, ring closing metathesis reaction, and others. In this work, we linked side chains by lactam bridges of short oligoureas (four residues), containing Glu- and Lys-like residues. The designed oligoureas differed in the position of the Glu-like residue. Next, the conformational properties of linear and cyclic compounds were studied in protic solvent (methanol) by nuclear magnetic resonance and circular dichroism. Importantly, it was discovered that larger macrocycles (24-membered) are more tolerated with respect to the helical turn than smaller macrocycles (19-membered) under the studied conditions.

Identification of floral aroma components and molecular regulation mechanism of floral aroma formation in Phalaenopsis.

Most Phalaenopsis cultivars have almost no aroma, with a few exceptions. Phalaenopsis presents significant challenges in fragrance breeding due to its weak aroma and low fertility. It is therefore necessary to identify the aroma components and key regulatory genes in Phalaenopsis cultivars like 'Orange Beauty', 'Brother Sara Gold', 'Purple Martin', 'H026', 'SK16', 'SX098', and 'SH51', to improve the aroma of the common Phalaenopsis. Floral aroma components were tested on nine Phalaenopsis species, using smell identification and headspace gas chromatography-mass spectrometry. The result showed that alcohols, esters, and alkenes were the key specific components in the different species and cultivar aromas and the aroma intensity and component content of cultivars with different colors were different. The main components of the floral aromas in Phalaenopsis were alcohols (including eucalyptol, linalool, citronellol, and 1-hexanol), esters (including hexyl acetate, leaf acetate, and dibutyl phthalate), alkenes (including pinene and sabinene) and arenes (like fluorene). The transcriptome of flowers in the bud stage and bloom stage of P. 'SH51' was sequenced and 5999 differentially expressed genes were obtained. The contributions of the phenylpropionic acid/phenyl ring compound and the terpene compound to the aroma were greater. Sixteen genes related to phalaenopsis aroma were found. TC4M, PAL, CAD6, and HR were related to phenylpropanoid synthesis pathway. SLS, TS10, and P450 were related to the synthesis pathway of terpenes. TS10 and YUCCA 10 were involved in tryptophan metabolism. This is the first report on the floral aroma components and regulatory genes in Phalaenopsis. The proposed method and research data can provide technical support for Phalaenopsis breeding. © 2024 Society of Chemical Industry.

Gram-Scale Synthesis of (±)-Tylophorine

AbstractWe report a practical scalable synthesis of the natural product (±)-tylophorine by using an operationally simple protecting-group-free route from readily accessible starting materials. Synthesis of a cyclic N-acetyl diester compound through cyclization, followed by two key steps (decarboxylation and a Clemmensen reduction), provides access to the target molecule.

Modifications of surgical techniques in laparoscopic percutaneous extraperitoneal closure of inguinal ring for childhood inguinal hernia to achieve zero recurrence and zero subcutaneous stitch granuloma.

To present our technical modifications of single incision laparoscopic percutaneous extraperitoneal closure (SILPEC) of the internal inguinal ring (IIR) for pediatric inguinal hernia (PIH). The prospectively collected data of all children diagnosed with PIH undergoing SILPEC at our center from 2016 to 2023 were reviewed and divided into two groups for result comparison: Group A: before and Group B: after the implementation of full modifications. Our modifications included using a nonabsorbable monofilament suture, creating a peritoneal thermal injury at the internal inguinal ring (IIR), employing a cannula to ensure the suture at the IIR ligates only the peritoneum, and double ligation of the IIR in selected cases. 1755 patients in group A and in group B (1 month to 14 years old) were enrolled. There were no significant differences regarding baseline patient characteristics between the two groups. At a median follow-up of 40 months, the rate of recurrent CIH and subcutaneous stitch granuloma (SSG) was 2.3% and 1.5% in group A vs. 0% and 0% in group B (p < 0.001). There were no hydroceles, no ascended or atrophic testis. Our SILPEC technical modifications can achieve zero recurrence and zero SSG for PIH.

Synthesis and Properties of Cyclic π-Conjugated Molecules and Their Dication and Monoradical Cation.

We synthesized cyclic π-conjugated molecules by double Friedel-Crafts reaction of amino group-substituted 1,2-bis(2-phenylethynyl)benzene with Meldrum's acid derivative. The structures of the cyclic π-conjugated molecules were determined by single-crystal X-ray structure analysis. The oxidation of the dimethylamino group-substituted π-conjugated molecule with NOBF4 gave a closed-shell dication that is stable at >210 °C. The monoradical cation of the di(4-methoxyphenyl)amino group-substituted π-conjugated molecule is stable in dichloromethane solution (half-life of nearly 15 days) and shows near-infrared absorption.

Dispersion of Single-Walled Carbon Nanotubes by Aromatic Cyclic Schiff Bases via Non-Covalent Interactions.

One of the challenging issues that hinders the application of single-walled carbon nanotubes (SWCNTs) is the poor solubility and the inevitable formation of bundles. Efforts still need to be made towards solving the problem. Herein, we report a non-covalent strategy to disperse aggregated SWCNTs by aromatic cyclic Schiff bases assisted by ultrasonic techniques. The aromatic cyclic Schiff base (OMM) was synthesized via Schiff base reactions, and the molecular structure was determined by ATR-FT-IR, solid-state 13C-NMR, and HRMS. Although the yielded product showed poor solubility in aqueous solution and organic solvents, it could interact with and disperse the aggregated SWCNTs in dimethyl formamide (DMF) under the condition of ultrasound. UV-vis-NIR, FL, Raman spectra, AFM, and TEM, along with computer simulations, provide evidence for the interactions between OMM molecules and SWCNTs and the dispersion thereof. The semiconductive (7,5), (8,6), (12,1), and (9,7)-SWCNTs expressed a preference for dissolution. The capability of dispersion is contributed by π-π, C-H·π, and lone pair (lp)·π interactions between OMM and SWCNTs based on the simulated results. The present non-covalent strategy could provide inspiration for preparing organic cyclic compounds as dispersants for SWCNTs and then facilitate their further utilization.

Supercritical Water Liquefaction of Mixed Waste Polystyrene, Polypropylene, and Polyethylene for Production of High Yield Oils.

Supercritical water liquefaction of different plastic wastes has been investigated under high-temperature and high-pressure conditions. The supercritical water liquefaction of commonly used plastic types, comprising polystyrene (PS), polypropylene (PP), and low-density polyethylene (LDPE) as well as their mixtures, is reported. The experiments were carried out at varying feedstock-to-water ratios with a residence time of 60 min under supercritical water reaction conditions. The process produced high oil yields of over 97 wt %, with the highest yields obtained at a plastic:water ratio of 1:3; at higher levels of input water, the yield of oil decreased slightly. The gas phase mainly consisted of light hydrocarbons such as methane, ethane, propane, and butane, with propane found to be the most abundant gas component. Aromatic hydrocarbons and alicyclic hydrocarbons were the major products in the product oil from the supercritical water liquefaction of polystyrene and polypropylene, whereas alkanes were predominant in the oil obtained from LDPE. Analysis of the oil obtained from binary (1:1) and ternary (1:1:1) plastic mixtures showed it exhibited aromatic hydrocarbons as the major constituent, indicating synergistic interaction. It was found that the incorporation of PP in the mixture facilitated the production of cyclic compounds and suppressed the production of alkanes. Supercritical water liquefaction offers an effective solution to plastic pollution, producing valuable products without the need for catalysts.

Synthesis of cyclic organosilicon compounds by palladium-catalyzed reactions of 2-silylaryl triflates

Abstract 2-Silylaryl triflates are widely employed as effective aryne precursors in organic synthesis, but their use as substrates for the synthesis of organosilicon compounds by retaining their silicon substituents is another attractive usage of these reagents. In particular, cyclic compounds with a silicon atom in the ring are promising candidates for various biologically active substances and optoelectronic functional materials. In this context, new synthetic methods for silicon-containing cyclic compounds have been actively investigated through the development of palladium-catalyzed reactions of 2-silylaryl triflates without generating aryne intermediates. As a result, selective synthesis of various silacyclic compounds has been achieved via C–H and/or C–Si bond activations as well as intramolecular exchange between these bonds and C–Pd bonds that are formed as reaction intermediates. An overview of this topic is described, including the mechanistic insights.

A π-Stacked Highly Stable, Insensitive, Energy-Containing Material with a Useful Planar Structure

Abstractπ-Stacking is common in materials, but different π–π stacking modes remarkably affect the properties and performances of materials. In particular, weak interactions, π-stacking and hydrogen bonding often have a significant impact on the stability and sensitivity of high-energetic compounds. A fused [5,7,5]-tricyclic energetic compound with a conjugated structure has been designed and synthesized. 4H-[1,2,5]Oxadiazolo[3,4-e][1,2,4]triazolo[3,4-g][1,2,4]triazepin-8-amine is obtained in 48% yield from 3-amino-4-carboxy-1,2,5-oxadiazole through an efficient two-step reaction. Owing to its layered planar structure and weak π interactions between layers, 4H-[1,2,5]oxadiazolo[3,4-e][1,2,4]triazolo[3,4-g][1,2,4]triazepin-8-amine exhibits high thermal stability (T d = 318 °C), low sensitivity (IS = 40 J, FS = 360 N), and relatively excellent detonation performance (D = 7059 ms–1, P = 20.2 GPa). This detonation performance is superior to that of the conventional explosive TNT. The developed procedure provides a new method for the synthesis of fused ring compounds.

Influence of Some Heterocyclic, Cyclic, and Nitrogen-Containing Compounds on Oxidative Deamination of Polyamines in a Cell-Free Test System.

We studied the effects of some nitrogen-containing, heterocyclic, and cyclic compounds on the rate of oxidative deamination of polyamines and putrescine in tissues with a high proliferation rate. For this purpose, the specific activities of the main enzymes of polyamine oxidative degradation - spermine oxidase (SMO), polyamine oxidase (PAO), and diamine oxidase (DAO) were determined using a cell-free test system from regenerating rat liver. The compounds methyl 2-(5-formylfuran-2-yl)benzoate and 2,7-bis-[2-(diethylamino)ethoxy]-9H-fluoren-9-one (and in the form of dihydrochloride) showed mainly activating effect on oxidative degradation of putrescine, spermidine, and spermine, which indirectly indicates their antiproliferative effect. Nitrogen-free compounds inhibited this process, thus exhibiting potentially carcinogenic properties. Correlations were calculated for activity of DAO, PAO, and SMO with 5 topological indices: Wiener (W), Rouvray (R), Balaban (J) in the Trinaistich modification, detour (Ip), and electropy (Ie). The highest dependence was noted for DAO and the Balaban index (R=-0.55), for PAO and the detour index (R=0.78), and for SMO and the electropy index (R=0.53). The remaining dependencies showed insignificant correlation strength.

Recognition of screening out hierarchical toxic contaminants tuned by quantified pseudo-components from complex engineering co-combustion

Co-combustion of industrial and municipal solid wastes has emerged as the most promising disposal technology, yet its effect on unknown contaminants generation remains rarely revealed due to waste complexity. Hence, six batches of large-scale engineering experiments were designed in an incinerator of 650 t/d, which overcame the inauthenticity and deviation of laboratory tests. 953–1772 non-targeted compounds were screened in fly ash. Targeting the impact of co-combustion, a pseudo-component matrix model was innovatively integrated to quantitatively extract nine components from complex wastes grouped into biomass and plastic. Thus, the influence was evaluated across eight dimensions, covering molecular characteristics and toxicity. The effect of co-combustion with biomass pseudo-components was insignificant. However, co-combustion with high ratios of plastic pseudo-components induced higher potential risks, significantly promoting the formation of unsaturated hydrocarbons, highly unsaturated compounds (DBE≥15), and cyclic compounds by 19 %− 49 %, 17 %− 31 %, and 7 %− 27 %, respectively. Especially, blending with high ratios of PET plastic pseudo-components produced more species of contaminants. Unique 2 Level I toxicants, bromomethyl benzene and benzofuran-2-carbaldehyde, as well as 4 Level II toxicants, were locked, receiving no concern in previous combustion. The results highlighted risks during high proportion plastics co-combustion, which can help pollution reduction by tuning source wastes to enable healthy co-combustion.

Unveiling the influence of end-capped acceptors modification on photovoltaic properties of non-fullerene fused ring compounds: a DFT/TD-DFT study.

Herein, unique A-D-A configuration-based molecules (NBD1-NBD7) were designed from the reference compound (NBR) by utilizing the end-capped acceptor modification approach. Various electron-withdrawing units -F, -Cl, -CN, -NO2, -CF3, -HSO3, and -COOCH3, were incorporated into terminals of reference compound to designed NBD1-NBD7, respectively. A theoretical investigation employing the density functional theory (DFT) and time-dependent DFT (TD-DFT) was performed at B3LYP/6-311G(d,p) level. To reveal diverse opto-electronic and photovoltaic properties, the frontier molecular orbitals (FMOs), absorption maxima (λ max), density of states (DOS), exciton binding energy (E b), open-circuit voltage (V oc) and transition density matrix (TDM) analyses were executed at the same functional. Moreover, the global reactivity parameters (GRPs) were calculated using the HOMO-LUMO energy gaps from the FMOs. Significant results were obtained for the designed molecules (NBD1-NBD7) as compared to NBR. They showed lesser energy band gaps (2.024-2.157 eV) as compared to the NBR reference (2.147 eV). The tailored molecules also demonstrated bathochromic shifts in the chloroform (671.087-717.164 nm) and gas phases (623.251-653.404 nm) as compared to NBR compound (674.189 and 626.178 nm, respectively). From the photovoltaic perspectives, they showed promising results (2.024-2.157 V). Furthermore, the existence of intramolecular charge transfer (ICT) in the designed compounds was depicted via their DOS and TDM graphical plots. Among all the investigated molecules, NBD4 was disclosed as the excellent candidate for solar cell applications owing to its favorable properties such as the least band gap (2.024 eV), red-shifted λ max in the chloroform (717.164 nm) and gas (653.404 nm) phases as well as the minimal E b (0.126 eV). This is due to the presence of highly electronegative -NO2 unit at the terminal of electron withdrawing acceptor moiety, which leads to increased conjugation and enhanced the intramolecular charge transfer (ICT) rate. The obtained insights suggested that the designed molecules could be considered as promising materials for potential applications in the realm of OSCs.

Polyoxometalate Functionalized Cyclic Trinuclear Copper Compounds for Bifunctional Electrochemical Detection and Photocatalytic Reduction of Cr(VI).

The design and intentional construction of crystalline materials containing two clusters with redox properties in one framework still remains challenging. Linking oxidative polyoxometalate (POM) clusters and a reductive cyclic trinuclear copper complex (Cu-CTC) to prepare stable catalysts is rarely reported. Herein, we successfully obtained two new polyoxometalate-based metal-organic compounds (POMOCs) [CuII3(PyCA)3(μ3-OH)(β-Mo8O26)0.5(H2O)2]·5H2O (1), [CuII3(PyCA)3(μ3-OH)]2(CuIIW12O40)[CuII(H2O)6] (2) (PyCA = 1H-pyrazole-4-carbaldehyde) by enabling precursors of Cu-CTC and POM cocrystallization in one pot via hydrothermal method. The [β-Mo8O26]4- cluster in compound 1 combined with Cu-CTC units to form a 1D structure, and the [CuW12O40]6- unit in compound 2 linked two Cu-CTC units to form a sandwich-like 0D structure. Also, Cu-CTC CuI3(PyCA)3·H2O (Cu3) was synthesized for performance comparison. A series of characterizations indicate that compound 1 is more conducive to electron transfer than compound 2. In addition, compounds 1 and 2 can act as bifunctional catalysts for the electrochemical detection and photocatalytic reduction of Cr(VI). Particularly, the photoreduction rates of Cr(VI) by compounds 1 and 2 are 96.7% and 96.3% for only 10 and 14 min under visible light, respectively, and it is better than that of Cu3 and most other reported photocatalysts. Furthermore, the active sites and mechanisms for electrochemical detection and photocatalytic reduction of Cr(VI) were discussed.

Kinetics of direct and water‐mediated tautomerization reactions of four‐membered cyclic lactims to amides or lactams

AbstractAs part of a series of studies of hydrogen‐atom transfer or tautomerization reactions of imidic acid‐amide species, ──═─ ═──, we report the rate constants for a set of 16 four‐membered cyclic compounds at low, 50–300 K, and high, 500–1500 K, temperatures. The compounds are labeled according to the two ring groups X and Y, which can be , NH, CH, N, O, or C(O) and which are at some remove from the reactive site. These rate constants are for both the direct reaction and for that mediated by an additional water molecule, which facilitates the hydrogen transfer reaction. In the latter case, we show that the rate of reaction from a pre‐reaction complex is rapid at temperatures down to 50 K and dominated by quantum mechanical effects as evaluated by small‐curvature and quantized‐reaction‐states tunneling. In addition, we present thermochemical data such as enthalpies of formation, entropies, isobaric heat capacities, and enthalpy functions for these largely unknown species, which span a range of compounds from ‐propiolactone to 1,3‐diazetidine‐2,4‐dione.

An Intramolecular-Lock Facilitates Planar Tricyclic Fused Energetic Compounds.

Exploiting novel fused cyclic frameworks through simple and efficient methods has provided a blueprint for developing advanced explosives. In this study, six new [5,6,5]-tricyclic fused energetic compounds (I-VI) were synthesized through an intramolecular cyclization strategy involving a C-NH2 directed cyclization reaction. The work not only boosts the development of fused cyclic energetic compounds but also highlights their potential applications as secondary or heat-resistant explosives.

Density Function Theory Study on the Energy and Circular Dichroism Spectrum for Methylene-Linked Triazole Diads Depending on the Substitution Position and Conformation.

Since the discovery of metal-catalyzed azide-alkyne cycloadditions, 1,2,3-triazoles have been widely used as linkers for various residues. 1,2,3-Triazole is an aromatic five-membered cyclic compound consisting of three nitrogen and two carbon atoms with large dipoles that absorb UV light. In the past decade, we have been working on the synthesis of dense triazole polymers possessing many 1,2,3-triazole residues linked through a carbon atom in their backbone as a new type of functional polymer. Recently, we reported that stereoregular dense triazole uniform oligomers exhibit a circular dichroism signal based on the chiral arrangement of two neighboring 1,2,3-triazole residues. In this study, to investigate the chiral conformation of two neighboring 1,2,3-triazole residues in stereoregular dense triazole uniform oligomers, density functional theory (DFT) calculations were performed using 1,2,3-triazole diads with different substitution positions and conformations as model compounds and compared with our previous results.

Theoretical Prediction and Comprehensive Characterization of an All-Nitrogenatomic Ring, Cyclo[18]Nitrogen (N18).

The cyclic molecule cyclo[18]carbon composed of 18 carbon atoms has been observed in condensed phase experiment in recent years and has attracted great attention. Through state-of-art quantum chemistry calculation, this study found that 18 nitrogen atoms can also form a macrocyclic system, cyclo[18]nitrogen (N18), though its lifetime is very short at room temperature and can only exist for a relatively long time at very low temperatures. We comprehensively theoretically studied properties of N18, including geometric configurations, thermal decomposition mechanism and rate, molecular dynamics behavior, energetic properties, vibrational and electronic spectra. We also discussed in depth the electronic structure of N18, including nature of the N-N bonds, lone-pairs, charge distribution characteristics, electronic delocalization, and aromaticity. This work is not only the first exploration of the macrocyclic N18 molecule, but also the first time to systematically examine a very long-chain substance fully composed of nitrogen atoms in isolated state.

Comparison of volatile compound profiles derived from various livestock protein alternatives including edible-insect, and plant-based proteins

In this study, the distinctive chemical fingerprints that contribute to the flavor characteristics of various protein materials, such as insects, plant-based protein, and livestock, were investigated. In edible-insects (Tenebrio molitor and Protaetia brevitarsis), aldehydes and cyclic volatile compounds were the predominant volatile components and had distinct flavor characteristics such as cheesy, sharp, green, floral, and sweet. In contrast, the relatively high levels of pyrazines and furans in plant-based protein materials, such as textured vegetable and pea protein. They included unique flavor properties characterized by sweet, fatty, grassy, creamy, and roasted. The primary volatile chemical group detected in livestock protein materials, such as a pork and a beef, was ketones. The pork sample showed specific flavors, such as alcoholic, green, and fruity, while a beef presented distinctive flavor, including creamy, fruity, and alcoholic. Based on the results, this research provided the understanding of the flavor aspects of diverse protein materials.

Avellanin A Has an Antiproliferative Effect on TP-Induced RWPE-1 Cells via the PI3K-Akt Signalling Pathway.

Cyclic pentapeptide compounds have garnered much attention as a drug discovery resource. This study focused on the characterization and anti-benign prostatic hyperplasia (BPH) properties of avellanin A from Aspergillus fumigatus fungus in marine sediment samples collected in the Beibu Gulf of Guangxi Province in China. The antiproliferative effect and molecular mechanism of avellanin A were explored in testosterone propionate (TP)-induced RWPE-1 cells. The transcriptome results showed that avellanin A significantly blocked the ECM-receptor interaction and suppressed the downstream PI3K-Akt signalling pathway. Molecular docking revealed that avellanin A has a good affinity for the cathepsin L protein, which is involved in the terminal degradation of extracellular matrix components. Subsequently, qRT-PCR analysis revealed that the expression of the genes COL1A1, COL1A2, COL5A2, COL6A3, MMP2, MMP9, ITGA2, and ITGB3 was significantly downregulated after avellanin A intervention. The Western blot results also confirmed that it not only reduced ITGB3 and FAK/p-FAK protein expression but also inhibited PI3K/p-PI3K and Akt/p-Akt protein expression in the PI3K-Akt signalling pathway. Furthermore, avellanin A downregulated Cyclin D1 protein expression and upregulated Bax, p21WAF1/Cip1, and p53 proapoptotic protein expression in TP-induced RWPE-1 cells, leading to cell cycle arrest and inhibition of cell proliferation. The results of this study support the use of avellanin A as a potential new drug for the treatment of BPH.