Arc discharge synthesis has industrial relevance due to its low cost and scale-up potential. The production of titanium nitride nanoparticles was achieved by direct current arc discharge in an atmospheric-pressured ambient composed of N2 and Ar. We systematically investigated the effect of the synthesis parameters, including quench gas velocity, quench gas composition, and applied arc current, on the particle quality, yield, and size. It is found that increasing quench gas velocity enables to produce particles with a primary size of 10–15 nm, while titanium nitride particles of 20–50 nm are produced at low quench gas velocity based on scanning electron microscope (SEM) analysis. X-ray diffraction (XRD) results indicated that titanium nitride particles produced at various nitrogen compositions are almost stoichiometric, while the crystallite size increases almost 20 nm when increasing nitrogen contents in the quench gas. Quench gas composition also has a significant impact on the arc voltage as well as particle production rate. When increasing the nitrogen concentration from 20% to 100%, the production rate can be enhanced by a factor of three. Besides, raising the applied arc current from 12A to 50 A leads to a yield enhancement of factor 10. According to the Brunauer-Emmett-Teller (BET) measurement, the increase of applied arc current has a limited impact on primary particle size. The enhancement in particle production rate is mainly reflected by the larger agglomerate sizes and agglomerate number concentration. Additionally, based on experimental observations and previous studies, a mechanism is presented to explain the growth of deposits on the cathode tip.