Crystallization Pathways Research Articles

Chloride-Based Additive Engineering for Efficient and Stable Wide-Bandgap Perovskite Solar Cells.

Metal halide perovskite based tandem solar cells are promising to achieve power conversion efficiency beyond the theoretical limit of their single-junction counterparts. However, overcoming the significant open-circuit voltage deficit present in wide-bandgap perovskite solar cells remains a major hurdle for realizing efficient and stable perovskite tandem cells. Here, a holistic approach to overcoming challenges in 1.8eV perovskite solar cells is reported by engineering the perovskite crystallization pathway by means of chloride additives. In conjunction with employing a self-assembled monolayer as the hole-transport layer, an open-circuit voltage of 1.25V and a power conversion efficiency of 17.0% are achieved. The key role of methylammonium chloride addition is elucidated in facilitating the growth of a chloride-rich intermediate phase that directs crystallization of the desired cubic perovskite phase and induces more effective halide homogenization. The as-formed 1.8eV perovskite demonstrates suppressed halide segregation and improved optoelectronic properties.

Evaluation of the non-isothermal crystallization kinetics of the (Zr55Cu30Al10Ni5)99Nb1 bulk metallic glass

Non-isothermal crystallization kinetics of (Zr55Cu30Al10Ni5)99Nb1 bulk metallic glass (BMG) was studied by differential thermal analysis and differential scanning calorimetry. The crystallization pathway was changed by increasing the heating rate. The apparent activation energy at characteristic temperatures was calculated using Kissinger method. Local activation energy variations by crystallized volume fraction (α) (a.u. Ec(α)) was extracted using Ozawa-Flynn-Wall (OFW) method. Crystallization reaction function (f(α)) at different heating rates was extracted by means of Šesták-Berggren (SB) model.

Compact sample environment for in situ X-ray scattering during spin-coating.

We demonstrate a compact sample environment for the in situ study of crystallization kinetics of thin films on synchrotron beamlines, featuring atmospheric control, automated deposition, spin-coating, and annealing stages. The setup is suitable for studying thin film growth in real time using grazing-incidence X-ray diffraction techniques. Humidity and oxygen levels are being detected by sensors. The spinning stage exhibits low vertical oscillation amplitude (∼3μm at speeds up to 10 000 rpm) and can optionally be employed for antisolvent application or gas quenching to investigate the impact of these techniques, which are often used to assist thin film growth. Differential reflectance spectroscopy is implemented in the spin-coater environment for inspecting thin film thickness and optical properties. The infrared radiation-based annealing system consists of a halogen lamp and a holder with an adjustable lamp-to-sample distance, while the sample surface temperature is monitored by a pyrometer. All features of the sample environment can be controlled remotely by the control software at synchrotron beamlines. In order to test and demonstrate the performance, the crystallization pathway of the antisolvent-assisted MAPbI3 (MA = methylammonium) perovskite thin film during the spinning and annealing stages is monitored and discussed.

Lithium crystallization at solid interfaces

Understanding the electrochemical deposition of metal anodes is critical for high-energy rechargeable batteries, among which solid-state lithium metal batteries have attracted extensive interest. A long-standing open question is how electrochemically deposited lithium-ions at the interfaces with the solid-electrolytes crystalize into lithium metal. Here, using large-scale molecular dynamics simulations, we study and reveal the atomistic pathways and energy barriers of lithium crystallization at the solid interfaces. In contrast to the conventional understanding, lithium crystallization takes multi-step pathways mediated by interfacial lithium atoms with disordered and random-closed-packed configurations as intermediate steps, which give rise to the energy barrier of crystallization. This understanding of multi-step crystallization pathways extends the applicability of Ostwald’s step rule to interfacial atom states, and enables a rational strategy for lower-barrier crystallization by promoting favorable interfacial atom states as intermediate steps through interfacial engineering. Our findings open rationally guided avenues of interfacial engineering for facilitating the crystallization in metal electrodes for solid-state batteries and can be generally applicable for fast crystal growth.

A hierarchical In2O3@ZIF-67 architecture with upgraded CO2 photoreduction performances

CO2 photoreduction is warmly embraced as a promising strategy to attain carbon neutrality, with natural photosynthesis constituting a valuable source of inspiration for catalyst design. Herein, an In2O3@ZIF-67 artificial photosynthetic nanoreactor was constructed by growing ZIF-67 on the interior and exterior of MIL-68(In)-derived hollow In2O3 prisms via potential nonclassical crystallization pathway(s), forming an efficient double heterostructure with separated reaction centers and prompt electron transfers. With the introduction of [Ru(bpy)3]2+ photosensitizer, the nanoreactor possesses two antennae to harvest visible light. Additionally, the macroscopic architecture permits enhanced light and photosensitizer utilization, while ZIF-67 facilitates the capture of CO2. Collectively, the developed nanoreactor exhibits a remarkable CO production rate of 33420 µmol g−1h−1 with the diminished quantity of the photosensitizer. Moreover, the hydrophobicity of the nanoreactor is found to suppress the side product of H2 and elevate CO selectivity to 94%, further demonstrating the superiority of its exquisite design.

Roles of Hydrogen Bonds and Alignment in Oriented Attachment of Gibbsite Nanoparticles: Insights from Molecular Dynamics

Oriented attachment (OA) of nanoparticles is an important crystal growth pathway in the synthesis of hierarchical structures. Although a significant understanding of OA has been made, the effect of atomistic misalignment and the roles of solvent/particle and particle/particle interactions on the structure–energy relationship during an OA remain elusive. In this study, we perform molecular dynamics simulations to calculate the potential of mean force (PMF) profile for gibbsite particle translation on a gibbsite slab with 1 or 2 intervening water layers (1W or 2W). The structures of the gibbsite surfaces and the confined water are analyzed to determine how the number and type of hydrogen bonds (H-bonds) influence the free energy profile during the translation. The PMF profile exhibits a periodicity of length 5.078 Å, consistent with the gibbsite unit cell size along the translation direction. The changes in the surface–water and water–water hydrogen bond network and water and surface OH groups’ orientations during the translation are strongly coupled with the changes in the PMF profile in the 1W case. However, when increasing the number of intervening water layers from 1W to 2W, the particle/slab misalignment becomes a dominant factor controlling the behavior of the PMF profile. We also establish a method to quantify misalignment between the particle and the slab, which exhibits a strong correlation with the free energy for the 2W case. These results shed more light into the roles of particle/slab misalignment and hydrogen bond network in the OA of mineral particles in aqueous solution.

Kinetic Control of Solvate Intermediate Evolution for High-Performance Perovskite Solar Cells by the Facial Mask Incubation Technique

The growth of high-quality perovskite films is complicated by the fact of uncontrollable crystallization pathways from perovskite precursors. During solution processing, extensive undesired nonperovskite products including residual solvate intermediates are produced due to quick solvent evaporation, which will adversely affect the efficiency and stability of perovskite solar cells (PSCs). Herein, we developed a highly efficient phase-transition pathway using a polydimethylsiloxane (PDMS)-based facial mask (FM) incubation technique, which enables significant reduction of the perovskite crystallization rate and depression of perovskite aggregation behavior. A surprising finding reveals that this technique induces complete phase transition from solvate intermediates to the perovskite phase, thereby obtaining phase-pure perovskite film. Meanwhile, a high-quality perovskite film with a shiny smooth surface, decreased defect states, and alleviated lattice strain is achieved after utilizing the FM strategy. Consequently, the target-inverted PSCs deliver a respectable efficiency of ∼21% and superior stability in both shelf storage (over 3700 h with 90% of initial efficiency) and light soaking (over 1000 h with 80% of initial efficiency) conditions. Our work highlights the importance of eliminating residual solvate intermediates to construct high-quality perovskites with excellent phase purity for ongoing production of high-performance perovskite-based optoelectronic devices.

Growth dynamics and amorphous-to-crystalline phase transformation in natural nacre

Biominerals, such as nacreous bivalve shells, are important archives of environmental information. Most marine calcifiers form their shells from amorphous calcium carbonate, hypothesised to occur via particle attachment and stepwise crystallisation of metastable precursor phases. However, the mechanism of this transformation, including the incorporation of trace elements used for environmental reconstructions, are poorly constrained. Here, using shells of the Mediterranean mussel, we explore the formation of nacre from the meso- to the atomic scale. We use a combination of strontium pulse-chase labelling experiments in aquaculture and correlated micro- to sub-nanoscale analysis to show that nacre grows in a dynamic two-step process with extensional and space-filling growth components. Furthermore, we show that nacre crystallizes via localised dissolution and reprecipitation within nanogranules. Our findings elucidate how stepwise crystallization pathways affect trace element incorporation in natural biominerals, while preserving their intricate hierarchical ultrastructure.

Nanoscale Pathway of Modern Dolomite Formation in a Shallow, Alkaline Lake.

Dolomite [CaMg(CO3)2] formation under Earth surface conditions is considered largely inhibited, yet protodolomite (with a composition similar to dolomite but lacking cation ordering), and in some cases also dolomite, was documented in modern shallow marine and lacustrine, evaporative environments. Authigenic carbonate mud from Lake Neusiedl, a shallow, episodically evaporative lake in Austria consists mainly of Mg-calcite with zoning of Mg-rich and Mg-poor regions in μm-sized crystals. Within the Mg-rich regions, high-resolution transmission electron microscopy revealed < 5-nm-sized domains with dolomitic ordering, i.e., alternating lattice planes of Ca and Mg, in coherent orientation with the surrounding protodolomite. The calcite with less abundant Mg does not show such domains but is characterized by pitted surfaces and voids as a sign of dissolution. These observations suggest that protodolomite may overgrow Mg-calcite as a result of the changing chemistry of the lake water. During this process, oscillating concentrations (in particular of Mg and Ca) at the recrystallization front may have induced dissolution of Mg-calcite and growth of nanoscale domains of dolomite, which subsequently became incorporated as ordered domains in coherent orientation within less ordered regions. It is suggested that this crystallization pathway is capable of overcoming, at least at the nanoscale, the kinetic barrier to dolomite formation.

Microstructural diversity, nucleation paths, and phase behavior in binary mixtures of charged colloidal spheres.

We study low-salt, binary aqueous suspensions of charged colloidal spheres of size ratio Γ = 0.57, number densities below the eutectic number density nE, and number fractions of p = 1.00-0.40. The typical phase obtained by solidification from a homogeneous shear-melt is a substitutional alloy with a body centered cubic structure. In strictly gas-tight vials, the polycrystalline solid is stable against melting and further phase transformation for extended times. For comparison, we also prepare the same samples by slow, mechanically undisturbed deionization in commercial slit cells. These cells feature a complex but well reproducible sequence of global and local gradients in salt concentration, number density, and composition as induced by successive deionization, phoretic transport, and differential settling of the components, respectively. Moreover, they provide an extended bottom surface suitable for heterogeneous nucleation of the β-phase. We give a detailed qualitative characterization of the crystallization processes using imaging and optical microscopy. By contrast to the bulk samples, the initial alloy formation is not volume-filling, and we now observe also α- and β-phases with low solubility of the odd component. In addition to the initial homogeneous nucleation route, the interplay of gradients opens various further crystallization and transformation pathways leading to a great diversity of microstructures. Upon a subsequent increase in salt concentration, the crystals melt again. Wall-based, pebble-shaped β-phase crystals and facetted α-crystals melt last. Our observations suggest that the substitutional alloys formed in bulk experiments by homogeneous nucleation and subsequent growth are mechanically stable in the absence of solid-fluid interfaces but thermodynamically metastable.

Exploring the Role of Miniemulsion Nanodroplet Confinement on the Crystallization of MoO3: Morphology Control and Insight on Crystal Formation by In Situ Time-Resolved SAXS/WAXS

Enclosed nanoscale volumes, i.e., confined spaces, represent a fascinating playground for the controlled synthesis of inorganic materials, albeit their role in determining the synthetic outcome is currently not fully understood. Herein, we address the synthesis of MoO3 nano- and microrods with hexagonal section in inverse miniemulsion droplets and batch conditions, evaluating the effects of spatial confinement offered by miniemulsion droplets on their crystallization. Several synthetic parameters were systematically screened and their effect on the crystal structure of h-MoO3, as well as on its size, size distribution and morphology, were investigated. Moreover, a direct insight on the crystallization pathway of MoO3 in both synthetic conditions and as a function of synthetic parameters was provided by an in situ time-resolved SAXS/WAXS study, that confirmed the role of miniemulsion confined space in altering the stepwise process of the formation of h-MoO3.

Direct Imaging of the Kinetic Crystallization Pathway: Simulation and Liquid-Phase Transmission Electron Microscopy Observations.

The crystallization of materials from a suspension determines the structure and function of the final product, and numerous pieces of evidence have pointed out that the classical crystallization pathway may not capture the whole picture of the crystallization pathways. However, visualizing the initial nucleation and further growth of a crystal at the nanoscale has been challenging due to the difficulties of imaging individual atoms or nanoparticles during the crystallization process in solution. Recent progress in nanoscale microscopy had tackled this problem by monitoring the dynamic structural evolution of crystallization in a liquid environment. In this review, we summarized several crystallization pathways captured by the liquid-phase transmission electron microscopy technique and compared the observations with computer simulation. Apart from the classical nucleation pathway, we highlight three nonclassical pathways that are both observed in experiments and computer simulations: formation of an amorphous cluster below the critical nucleus size, nucleation of the crystalline phase from an amorphous intermediate, and transition between multiple crystalline structures before achieving the final product. Among these pathways, we also highlight the similarities and differences between the experimental results of the crystallization of single nanocrystals from atoms and the assembly of a colloidal superlattice from a large number of colloidal nanoparticles. By comparing the experimental results with computer simulations, we point out the importance of theory and simulation in developing a mechanistic approach to facilitate the understanding of the crystallization pathway in experimental systems. We also discuss the challenges and future perspectives for investigating the crystallization pathways at the nanoscale with the development of in situ nanoscale imaging techniques and potential applications to the understanding of biomineralization and protein self-assembly.

Accelerated Crystallization of LTA Zeolite Using a Combination of High-Silica FAU Zeolite with Low Crystallinity and Additional Al Sources

Synthesis methods and crystallization mechanisms of LTA zeolites have been studied by various approaches such as using alkali metal hydroxides, organic structure-directing agent cations, or fluoride anions, so that the understanding of the crystallization pathway is one of particular interest. As a fundamental research, we succeeded in synthesizing a highly crystalline LTA zeolite by combining dealuminated FAU with low crystallinity and an additional aluminum source (Al(OH)3). The crystallization rate of the LTA zeolite was higher than that from conventional colloidal silica (Ludox HS-40) and Al(OH)3. In addition, there was a large difference in the particle size distribution of the as-made LTA zeolites. Furthermore, when using dealuminated FAU and Al(OH)3, Al-rich aluminosilicate species with four-ring structures were observed in the initial induction period, after which the gradual incorporation of TMA+ cations into sod cages of the LTA zeolite was found. Based on the obtained results, a crystallization scheme for LTA zeolites synthesized using zeolitic sources of dealuminated FAU as starting materials is proposed, which deepens the understanding of the crystallization pathway of LTA zeolite.

Engineering the Thermodynamic Stability and Metastability of Mesophases of Colloidal Bipyramids through Shape Entropy.

We report several types of entropy-driven phase transition behaviors in hard bipyramid systems using Monte Carlo simulations. Bipyramidal nanoparticle shapes are synthesizable from gold and silver, with sizes ranging from tens to hundreds of nanometers. We report numerous colloidal crystalline phases with varying symmetries and complexities as the bipyramid aspect ratio and base polygon are varied. Some bipyramids are mesogenic and undergo either monotropic or enantiotropic phase transitions. We show that such mesophase behavior can be modulated by tuning the bipyramid aspect ratio. In addition, we report stepwise kinetic crystallization and melting pathways that occur via an intermediate mesophase as the system gains or loses order in successive stages. Our results demonstrate that complex phase transition behavior involving mesophases can be driven by entropy alone. Importantly, our results can guide the synthesis of bipyramid shapes able to assemble target structures and can be used to engineer the kinetic pathways to and from those structures to involve or avoid mesophases.

Solvent-free Synthesis of Multi-Module Pore-Space-Partitioned Metal-Organic Frameworks for Gas Separation.

Multi-module design of framework materials with multiple distinct building blocks has attracted much attention because such materials are more amenable to compositional and geometrical tuning and thus offer more opportunities for property optimization. Few examples are known that use environmentally friendly and cost-effective solvent-free method to synthesize such materials. Here, we report the use of solvent-free method (also modulator-free) to synthesize a series of multi-module MOFs with high stability and separation property for C2 H2 /CO2 . The synthesis only requires simple mixing of reactants and short reaction time (2 h). Highly porous and stable materials can be made without any post-synthetic activation. The success of solvent-free synthesis of multi-module MOFs reflects the synergy between different modules, resulting in stable pore-partitioned materials, despite the fact that other competitive crystallization pathways with simpler framework compositions also exist.

Solvent‐free Synthesis of Multi‐Module Pore‐Space‐Partitioned Metal‐Organic Frameworks for Gas Separation

AbstractMulti‐module design of framework materials with multiple distinct building blocks has attracted much attention because such materials are more amenable to compositional and geometrical tuning and thus offer more opportunities for property optimization. Few examples are known that use environmentally friendly and cost‐effective solvent‐free method to synthesize such materials. Here, we report the use of solvent‐free method (also modulator‐free) to synthesize a series of multi‐module MOFs with high stability and separation property for C2H2/CO2. The synthesis only requires simple mixing of reactants and short reaction time (2 h). Highly porous and stable materials can be made without any post‐synthetic activation. The success of solvent‐free synthesis of multi‐module MOFs reflects the synergy between different modules, resulting in stable pore‐partitioned materials, despite the fact that other competitive crystallization pathways with simpler framework compositions also exist.

Evidence of Multiple Crystallization Pathways in Lithium Disilicate: A Metadynamics Investigation.

Metadynamics simulations driven by using two X-ray diffraction peaks identified three alternative crystallization pathways of the lithium disilicate crystal from the melt. The most favorable one passes through the formation of disordered layered structures undergoing internal ordering in a second step. The second pathway involves the formation of phase-separated structures composed of nuclei of β-cristobalite crystals surrounded by lithium-rich phases in which metasilicate chains are formed. The conversion of these structures to the stable lithium disilicate crystal involves an intermediate structure whose silicate layers are connected by silicate rings with the energy barrier of 2.5 kJ/mol per formula unit (f.u.). The third pathway is highly unlikely because of the huge energy barrier involved (20 kJ/mol per f.u.). This path also involves the passage through a phase-separated structure of an indefinite silica region surrounded mainly by amorphous lithium oxide.

Intermediate phase assisted sequential deposition of reverse‐graded quasi‐2D alternating cation perovskites for MA‐free perovskite solar cells

AbstractOne‐step deposition approaches have been widely applied and developed in the fabrication of quasi‐2D perovskites. However, the regulation of quantum wells (QWs) and crystalline orientation is difficult and complicated when using this methodology. Sequential deposition is another widespread synthetic approach for preparing perovskite films and perovskite dimension engineering. In this article, δ‐CsPbI3 intermediate phase assisted sequential (IPAS) deposition is successfully carried out to fabricate MA‐free quasi‐2D ACI perovskites. The amount of the δ‐CsPbI3 intermediate phase in the PbI2 layer and the concentration of GAI molecule in the IPA solution both play important roles in the production of MA‐free quasi‐2D ACI perovskite films. The n value of the MA‐free quasi‐2D ACI perovskites can be adjusted, which affects the photovoltaic performance and device stability. Compared with one‐step deposition, the MA‐free quasi‐2D ACI perovskites prepared via IPAS deposition have opposite reverse‐graded QW distribution and improved vertical orientation, leading to a remarkable PEC of up to 18.86% and allowing the preparation of unpackaged devices with prominent working stability (80%, ~400 h). The underlying mechanism and crystallization pathway of IPAS deposition confirm that sequential deposition has unique superiority in regulating the QW distribution and crystalline orientation of quasi‐2D perovskites.image

Investigation of magnetite particle characteristics in relation to crystallization pathways

Investigation of magnetite particle characteristics in relation to crystallization pathways

Effects of Biliary Phospholipids on Cholesterol Crystallization and Growth in Gallstone Formation.

The prevalence of cholesterol gallstone disease is increasing, primarily due to the global epidemic of obesity associated with insulin resistance, and this trend leads to a considerable healthcare, financial, and social burden worldwide. Although phospholipids play an essential role in maintaining cholesterol solubility in bile through both mixed micelles and vesicles, little attention has been paid to the impact of biliary phospholipids on the pathogenesis of cholesterol gallstone formation. A reduction or deficiency of biliary phospholipids results in a distinctly abnormal metastable physical-chemical state of bile predisposing to supersaturation with cholesterol. Changes in biliary phospholipid concentrations influence cholesterol crystallization by yielding both liquid crystalline and "anhydrous" crystalline metastable intermediates, evolving into classical parallelogram-shaped cholesterol monohydrate crystals in supersaturated bile. As a result, five distinct crystallization pathways, A-E, have been defined, mainly based on the prime habits of liquid and solid crystals in the physiological or pathophysiological cholesterol saturation of gallbladder and hepatic bile. This review concisely summarizes the chemical structures and physical-chemical properties of biliary phospholipids and their physiological functions in bile formation and cholesterol solubility in bile, as well as comprehensively discusses the latest advances in the role of biliary phospholipids in cholesterol crystallization and growth in gallstone formation, largely based on the findings from clinical and animal studies and in vitro experiments. The insights gleaned from uncovering the cholelithogenic mechanisms are expected to form a fundamental framework for investigating the hitherto elusive events in the earliest stage of cholesterol nucleation and crystallization. This may help to identify better measures for early diagnosis and prevention in susceptible subjects and effective treatment of patients with gallstones.