Purpose – To analyze factors affecting crosstalk and to study the effect of repeater insertion on crosstalk, power dissipation and propagation delay.Design/methodology/approach – Crosstalk is effected by transition time of the signal; length of interconnect; distance between interconnects; size of driver and receiver; pattern of input; direction of flow of signal; and clock skew. This work is based on simulating interconnects with parameters obtained from 0.13 μm process. The types of noise addressed are overshoot; undershoot and oscillatory noise. Further, to study the effect of repeater insertion on crosstalk, repeaters are inserted in one line, i.e. line A only. Uniform repeaters varying in number from 1 to 60 are each of size Wn=3.9 μm and Wp=7.8 μm. Both lines A and B are terminated by a capacitive load of 5 fF. A crosstalk noise effect is measured for line A loaded with repeaters. The number of repeater is varied for four different cases of stimulations to both lines viz. input to line A, i.e. VA sw...