Critical-sized Calvarial Defect Model Research Articles

Strontium-Doped Whitlockite Scaffolds for Enhanced Bone Regeneration.

Bone graft substitutes to repair critical-sized bone fractures have experienced significant development over the last few decades. Among them, whitlockite (WH)-based bone grafts have proven to be effective in mediating bone healing. In the current study, a next generation, nature-inspired scaffold was developed with strontium-functionalized whitlockite nanoparticles (nSrWH) to enhance the intrinsic properties of WH. A series of nSrWH (with 2.5, 5, 7.5% Sr atomic substitution) were fabricated using a rapid-mixing wet precipitation route. Subsequently, the functionalized whitlockite was integrated into a gelatin-chondroitin sulfate scaffold and subjected to both in vitro and in vivo studies to investigate its osteogenic potential. Results indicated that nSrWH-containing scaffolds promoted osteogenic differentiation while inhibiting osteoclast activity. The positive impact of nSrWH was found to be dose-dependent, with the 7.5% Sr atomic substitution exhibiting the most significant results. Furthermore, the scaffold induced superior de novo bone regeneration compared to its undoped counterpart in the mouse calvarial critical-sized defect model. Collectively, these findings suggest that nSrWH nanoparticles inherit the beneficial properties of whitlockite, coupled by the therapeutic effects of Sr2+, operating in concert for an overall enhanced bone regeneration. As such, they constitute promising candidates to meet the biomedical requirements for bioactive bone graft substitutes.

Biodegradable magnesium and zinc composite microspheres with synergistic osteogenic effect for enhanced bone regeneration

Biodegradable polymer microspheres in bone tissue engineering have become appealing as their non-invasive advantages in irregular damage bone repair. However, current microspheres used in BTE still lack sufficient osteogenic capacity to induce effective bone regeneration. In this study, we developed osteogenic composite microspheres concurrently loaded with magnesium oxide (MgO) and zinc oxide (ZnO), both of which are osteogenic active substances, using a facile and scalable emulsification method. The osteogenic composite microspheres exhibited a sequential yet complementary release profile characterized by a rapid release of Mg2+ and a gradual release of Zn2+ in a physiological environment, thereby maintaining the concentration of bioactive ions at a sustained high level. As a result, the combination of Mg2+ and Zn2+ in the composite microspheres led to a synergistic enhancement in biomimetic mineralization and the upregulation in the expression of osteogenic-related genes and proteins at the cellular level. Through a critical-sized calvarial rate defect model, the osteogenic composite microspheres were demonstrated to have strong osteogenic ability to promote new bone formation via ultrasonic imaging, histological and immunohistochemical evaluations. In sum, these osteogenic composite microspheres as microcarriers of Mg2+ and Zn2+ have great potential in the delivery of therapeutic ions for treating bone defects.

Bioactive polymer composite scaffolds fabricated from 3D printed negative molds enable bone formation and vascularization

Scaffolds for bone defect treatment should ideally support vascularization and promote bone formation, to facilitate the translation into biomedical device applications. This study presents a novel approach utilizing 3D-printed water-dissolvable polyvinyl alcohol (PVA) sacrificial molds to engineer polymerized High Internal Phase Emulsion (polyHIPE) scaffolds with microchannels and distinct multiscale porosity. Two sacrificial mold variants (250 µm and 500 µm) were generated using fused deposition modeling, filled with HIPE, and subsequently dissolved to create polyHIPE scaffolds containing microchannels. In vitro assessments demonstrated significant enhancement in cell infiltration, proliferation, and osteogenic differentiation, underscoring the favorable impact of microchannels on cell behavior. High loading efficiency and controlled release of the osteogenic factor BMP-2 were achieved, with microchannels facilitating release of the growth factor. Evaluation in a mouse critical-size calvarial defect model revealed enhanced vascularization and bone formation in microchanneled scaffolds containing BMP-2. This study not only introduces an accessible method for creating multiscale porosity in polyHIPE scaffolds but also emphasizes its capability to enhance cellular infiltration, controlled growth factor release, and in vivo performance. The findings suggest promising applications in bone tissue engineering and regenerative medicine, and are expected to facilitate the translation of this type of biomaterial scaffold. Statement of significanceThis study holds significance in the realm of biomaterial scaffold design for bone tissue engineering and regeneration. We demonstrate a novel method to introduce controlled multiscale porosity and microchannels into polyHIPE scaffolds, by utilizing 3D-printed water-dissolvable PVA molds. The strategy offers new possibilities for improving cellular infiltration, achieving controlled release of growth factors, and enhancing vascularization and bone formation outcomes. This microchannel approach not only marks a substantial stride in scaffold design but also demonstrates its tangible impact on enhancing osteogenic cell differentiation and fostering robust bone formation in vivo. The findings emphasize the potential of this methodology for bone regeneration applications, showcasing an interesting advancement in the quest for effective and innovative biomaterial scaffolds to regenerate bone defects.

Hmga2 knockdown enhances osteogenic differentiation of adipose-derived mesenchymal stem cells and accelerates bone defect healing in mice

To investigate the role of high-mobility group AT-hook 2 (HMGA2) in osteogenic differentiation of adipose-derived mesenchymal stem cells (ADSCs) and the effect of Hmga2 knockdown for promoting bone defect repair. Bioinformatics studies using the GEO database and Rstudio software identified HMGA2 as a key factor in adipogenic-osteogenic differentiation balance of ADSCs. The protein-protein interaction network of HMGA2 in osteogenic differentiation was mapped using String and visualized with Cytoscape to predict the downstream targets of HMGA2. Primary mouse ADSCs (mADSCs) were transfected with Hmga2 siRNA, and the changes in osteogenic differentiation of the cells were evaluated using alkaline phosphatase staining and Alizarin red S staining. The expressions of osteogenic markers Runt-related transcription factor 2 (RUNX2), osteopontin (OPN), and osteocalcein (OCN) in the transfected cells were detected using RT-qPCR and Western blotting. In a mouse model of critical-sized calvarial defects, mADSCs with Hmga2-knockdown were transplanted into the defect, and bone repair was evaluated 6 weeks later using micro-CT scanning and histological staining. GEO database analysis showed that HMGA2 expression was upregulated during adipogenic differentiation of ADSCs. Protein-protein interaction network analysis suggested that the potential HMGA2 targets in osteogenic differentiation of ADSCs included SMAD7, CDH1, CDH2, SNAI1, SMAD9, IGF2BP3, and ALDH1A1. In mADSCs, Hmga2 knockdown significantly upregulated the expressions of RUNX2, OPN, and OCN and increased cellular alkaline phosphatase activity and calcium deposition. In a critical-sized calvarial defect model, transplantation of mADSCs with Hmga2 knockdown significantly promoted new bone formation. HMGA2 is a crucial regulator of osteogenic differentiation in ADSCs, and Hmga2 knockdown significantly promotes osteogenic differentiation of ADSCs and accelerates ADSCs-mediated bone defect repair in mice.

Potentiating effect of AMD3100 on bone morphogenetic protein-2 induced bone regeneration

BackgroundAMD3100, a CXCR4 antagonist, is currently prescribed for activating the mobilization of hematopoietic stem cells. Recently, AMD3100 was shown to potentiate bone morphogenetic protein-2 (BMP-2)-induced bone formation by stimulating the trafficking of mesenchymal cells. However, optimization of the strategic combination of AMD3100 and BMP-2 has not yet been clearly established. The purpose of this study was to evaluate the effect of AMD3100 on BMP-2-induced bone regeneration in vitro and in a mouse calvarial defect healing model.MethodsIn vitro osteoblastic differentiation and cell migration after sequential treatments with AMD3100 and BMP-2 were analyzed by alkaline phosphatase (ALP) activity, ALP staining, and calcium accumulation. Migration capacity was evaluated after treating mesenchymal cells with AMD3100 and/or BMP-2. A critical-size calvarial defect model was used to evaluate bone formation after sequential or continuous treatment with AMD3100 and BMP-2. The degree of bone formation in the defect was analyzed using micro-computed tomography (micro-CT) and histological staining.ResultsCompared with single treatment using either AMD3100 or BMP-2 alone, sequential treatment with AMD3100 followed by BMP-2 on mesenchymal cells increased osteogenic differentiation. Application of AMD3100 and subsequent BMP-2 significantly activated cell migration on mesenchymal cell than BMP-2 alone or AMD3100 alone.Micro-CT and histomorphometric analysis showed that continuous intraperitoneal (IP) injection of AMD3100 resulted significantly increased new bone formation in BMP-2 loaded scaffold in calvarial defect than control groups without AMD3100 IP injection. Additionally, both single IP injection of AMD3100 and subsequent BMP-2 injection to the scaffold in calvarial defect showed pronounced new bone formation compared to continuous BMP-2 treatment without AMD3100 treatment.ConclusionOur data suggest that single or continuous injection of AMD3100 can potentiate BMP-2-induced osteoblastic differentiation and bone regeneration. This strategic combination of AMD3100 and BMP-2 may be a promising therapy for bone regeneration.

Injectable thermo-responsive Poloxamer hydrogel/methacrylate gelatin microgels stimulates bone regeneration through biomimetic programmed release of SDF-1a and IGF-1

Injectable hydrogels, offering adaptable drug delivery of growth factors (GFs), hold promise for treating bone defects. To optimize osteogenic efficacy, the release of GFs should mirror the natural bone healing. We developed an injectable thermo-responsive hydrogel/microgels platform for dual GF delivery for bone regeneration. Stromal cell-derived factor-1 alpha (SDF-1a) and the Methacrylate Gelatin (GelMA) microgels which encapsulated insulin-like growth factor-1 (IGF-1) loaded liposomes (Ls) were introduced into Poloxamer 407 (P407) hydrogel matrix. This system achieved the biomimetic release profile of SDF-1a and IGF-1, which covered the early stage from day 1 to 7 and the continuous stage from day 5 to 21, respectively. In vitro study confirmed the enhanced migration, osteogenic biomarker expression, and matrix mineralization of the bone marrow mesenchymal stem cells (BMSCs) co-cultivated with the dual GFs delivering hydrogel/microgels. Transcriptome sequencing revealed that the potential mechanism was associated with mitogen-activated protein kinase (MAPK) signaling activation and its downstream ribosomal protein S6 kinase 2 (RSK2) upregulation. In a critical-sized calvarial defect model in Sprague-Dawley (SD) rats, the injectable hydrogel/microgels system promoted significant bone regeneration. Collectively, our study suggested the current hydrogel/microgels system with the biomimetic release of SDF-1a and IGF-1 efficiently promoted bone regeneration, informing the future development of GF delivery systems intended for bone regeneration therapies.

Mussel-inspired antimicrobial hydrogel with cellulose nanocrystals/tannic acid modified silver nanoparticles for enhanced calvarial bone regeneration

Bacterial infection is a serious challenge in the treatment of open bone defects, and reliance on antibiotic therapy may contribute to the emergence of drug-resistant bacteria. To solve this problem, this study developed a mineralized hydrogel (PVA-Ag-PHA) with excellent antibacterial properties and osteogenic capabilities. Silver nanoparticles (CNC/TA@AgNPs) were greenly synthesized using natural macromolecular cellulose nanocrystals (CNC) and plant polyphenolic tannins (TA) as stabilizers and reducing agents respectively, and then introduced into polyvinyl alcohol (PVA) and polydopamine-modified hydroxyapatite (PDA@HAP) hydrogel. The experimental results indicate that the PVA-Ag-PHA hydrogel, benefiting from the excellent antibacterial properties of CNC/TA@AgNPs, can not only eliminate Staphylococcus aureus and Escherichia coli, but also maintain a sustained sterile environment. At the same time, the HAP modified by PDA is uniformly dispersed within the hydrogel, thus releasing and maintaining stable concentrations of Ca2+ and PO43− ions in the local environment. The porous structure of the hydrogel with excellent biocompatibility creates a suitable bioactive environment that facilitates cell adhesion and bone regeneration. The experimental results in the rat critical-sized calvarial defect model indicate that the PVA-Ag-PHA hydrogel can effectively accelerate the bone healing process. Thus, this mussel-inspired hydrogel with antibacterial properties provides a feasible solution for the repair of open bone defects, demonstrating the considerable potential for diverse applications in bone repair.

Repair of Rat Calvarial Critical-Sized Defects Using Heparin-Conjugated Fibrin Hydrogel Containing BMP-2 and Adipose-Derived Pericytes.

The repair of critical-sized calvarial defects is a challenging problem for orthopedic surgery. One of the promising strategies of bone bioengineering to enhance the efficacy of large bone defect regeneration is the combined delivery of stem cells with osteoinductive factors within polymer carriers. The purpose of the research was to study the regenerative effects of heparin-conjugated fibrin (HCF) hydrogel containing bone morphogenetic protein 2 (BMP-2) and adipose-derived pericytes (ADPs) in a rat critical-sized calvarial defect model. In vitro analysis revealed that the HCF hydrogel was able to control the BMP-2 release and induce alkaline phosphatase (ALP) activity in neonatal rat osteoblasts. In addition, it was found that eluted BMP-2 significantly induced the osteogenic differentiation of ADPs. It was characterized by the increased ALP activity, osteocalcin expression and calcium deposits in ADPs. In vivo studies have shown that both HCF hydrogel with BMP-2 and HCF hydrogel with pericytes are able to significantly increase the regeneration of critical-sized calvarial defects in comparison with the control group. Nevertheless, the greatest regenerative effect was found after the co-delivery of ADPs and BMP-2 into a critical-sized calvarial defect. Thus, our findings suggest that the combined delivery of ADPs and BMP-2 in HCF hydrogel holds promise to be applied as an alternative biopolymer for the critical-sized bone defect restoration.

A facile and smart strategy to enhance bone regeneration with efficient vitamin D3 delivery through sterosome technology

The spontaneous healing of critical-sized bone defects is often limited, posing an increased risk of complications and suboptimal outcomes. Osteogenesis, a complex process central to bone formation, relies significantly on the pivotal role of osteoblasts. Despite the well-established osteogenic properties of vitamin D3 (VD3), its lipophilic nature confines administration to oral or muscle injection routes. Therefore, a strategic therapeutic approach involves designing a multifunctional carrier to enhance efficacy, potentially incorporating it into the delivery system. Here, we introduce an innovative sterosome-based delivery system, utilizing palmitic acid (PA) and VD3, aimed at promoting osteogenic differentiation and facilitating post-defect bone regeneration. The delivery system exhibited robust physical characteristics, including excellent stability, loading efficiency, sustained drug release and high cellular uptake efficiency. Furthermore, comprehensive investigations demonstrated outstanding biocompatibility and osteogenic potential in both 2D and 3D in vitro settings. A critical-sized calvarial defect model in mice recapitulated the notable osteogenic effects of the sterosomes in vivo. Collectively, our research proposes a clinically applicable strategy for bone healing, leveraging PA/VD3 sterosomes as an efficient carrier to deliver VD3 and enhance bone regenerative effects.

Clinical potential of plasma-functionalized graphene oxide ultrathin sheets for bone and blood vessel regeneration: Insights from cellular and animal models

Graphene and graphene oxide (GO), due to their unique chemical and physical properties, possess biochemical characteristics that can trigger intercellular signals promoting tissue regeneration. Clinical applications of thin GO-derived sheets have inspired the development of various tissue regeneration and repair approaches. In this study, we demonstrate that ultrathin sheets of plasma-functionalized and reduced GO, with the oxygen content ranging from 3.2 % to 22 % and the nitrogen content from 0 % to 8.3 %, retain their essential mechanical and molecular integrity, and exhibit robust potential for regenerating bone tissue and blood vessels across multiple cellular and animal models. Initially, we observed the growth of blood vessels and bone tissue in vitro using these functionalized GO sheets on human adipose-derived mesenchymal stem cells and umbilical vein endothelial cells. Remarkably, our study indicates a 2.5-fold increase in mineralization and two-fold increase in tubule formation even in media lacking osteogenic and angiogenic supplements. Subsequently, we observed the initiation, conduction, and formation of bone and blood vessels in a rat tibial osteotomy model, evident from a marked 4-fold increase in the volume of low radio-opacity bone tissue and a significant elevation in connectivity density, all without the use of stem cells or growth factors. Finally, we validated these findings in a mouse critical-size calvarial defect model (33 % higher healing rate) and a rat skin lesion model (up to 2.5-fold increase in the number of blood vessels, and 35 % increase in blood vessels diameter). This study elucidates the pro-osteogenic and pro-angiogenic properties of both pristine and plasma-treated GO ultrathin films. These properties suggest their significant potential for clinical applications, and as valuable biomaterials for investigating fundamental aspects of bone and blood vessel regeneration.

ECM-based Ca2+/l-arginine/NO periosteum nourishes bone defect microenvironment, directs macrophage polarity, and accelerates osteogenesis and angiogenesis

The natural periosteum is responsible for supporting bone homeostasis and initiating repair, but is often damaged during bone fracture, causing acute inflammation and loss of a functioning substratum for induction of new bone formation. Here, we propose an ECM-based Ca2+/l-arginine/nitric oxide (NO) electrospun periosteum to reinitiate bone regeneration. The multifaceted action of NO could promote osteoblastic differentiation, angiogenesis and polarization of macrophages, while accelerating new bone formation, enhancing bone quality and reducing inflammation in a rat critical size calvarial defect model, acting as a mainspring that drives the rest of the PI3K-AKT pathway including the downstream action of VEGF, MAPK and mTOR signalling. The modulation of NO cycle by periosteum scaffold is envisioned to be highly efficient at supporting bone grafting surgeries, with simple and clean clinical translation and implications for anti-inflammatory healing.

Nano-laponite encapsulated coaxial fiber scaffold promotes endochondral osteogenesis.

Osteoinductive supplements without side effects stand out from the growth factors and drugs widely used in bone tissue engineering. Lithium magnesium sodium silicate hydrate (laponite) nanoflake is a promising bioactive component for bone regeneration, attributed to its inherent biosafety and effective osteoinductivity. Up to now, the in vivo osteogenic potential and mechanisms of laponite-encapsulated fibrous membranes remain largely unexplored. This study presents a unique method for homogeneously integrating high concentrations of laponite RDS into a polycaprolactone (PCL) matrix by dispersing laponite RDS sol into the polymer solution. Subsequently, a core-shell fibrous membrane (10RP-PG), embedding laponite-loaded PCL in its core, was crafted using coaxial electrospinning. The PCL core's slow degradation and the shell's gradient degradation enabled the sustained release of bioactive ions (Si and Mg) from laponite. In vivo studies on a critical-sized calvarial bone defect model demonstrated that the 10RP-PG membrane markedly enhanced bone formation and remodeling by accelerating the process of endochondral ossification. Further transcriptome analysis suggested that osteogenesis in the 10RP-PG membrane is driven by Mg and Si from endocytosed laponite, activating pathways related to ossification and endochondral ossification, including Hippo, Wnt and Notch. The fabricated nanocomposite fibrous membranes hold great promise in the fields of critical-sized bone defect repair.

A new hydroxyapatite-alginate-gelatin biocomposite favor bone regeneration in a critical-sized calvarial defect model.

This study aimed to evaluate the osteogenic potential of hydroxyapatite (HA), Alginate (Alg), and Gelatine (Gel) composite in a critical-size defect model in rats. Twenty-four male rats were divided into three groups: a negative control with no treatment (Control group), a positive control treated with deproteinized bovine bone mineral (DBBM group), and the experimental group treated with the new HA-Alg-Gel composite (HA-Alg-Gel group). A critical size defect (8.5mm) was made in the rat's calvaria, and the bone formation was evaluated by in vivo microcomputed tomography analysis (µCT) after 1, 15, 45, and 90 days. After 90 days, the animals were euthanized and histological and histomorphometric analyses were performed. A higher proportion of mineralized tissue/biomaterial was observed in the DBBM group when compared to the HA-Alg-Gel and Control groups in the µCT analysis during all analysis periods. However, no differences were observed in the mineralized tissue/biomaterial proportion observed on day 1 (immediate postoperative) in comparison to later periods of analysis in all groups. In the histomorphometric analysis, the HA-Alg-Gel and Control groups showed higher bone formation than the DBBM group. Moreover, in histological analysis, five samples of the HA-Alg-Gal group exhibited formed bone spicules adjacent to the graft granules against only two of eight samples in the DBBM group. Both graft materials ensured the maintenance of defect bone thickness, while a tissue thickness reduction was observed in the control group. In conclusion, this study demonstrated the osteoconductive potential of HA-Alg-Gel bone graft by supporting new bone formation around its particles.

Development of a rapid-shaping and user-friendly membrane with long-lasting space maintenance for guided bone regeneration.

The success of guided bone regeneration (GBR) surgery depends largely on the use of GBR membranes to maintain space for bone regeneration and prevent soft tissue ingrowth. However, currently available commercial degradable GBR membranes are often limited by poor space maintenance ability and require additional suture or nail for fixation. To overcome these limitations, we developed a rapid-shaping, adhesive, and user-friendly GBR membrane (PLGA film-PGN) with long-lasting space maintenance by immersing an electrospun poly(lactide-co-glycolic acid) film in a photo-crosslinkable hydrogel composed of polyethylene glycol diacrylate, gelatin methacryloyl, and nanosilicate (PGN). The PGN hydrogel significantly improved the mechanical strength of the PLGA film-PGN and endowed it with plasticity and adhesive properties, making it more maneuverable. The maximum bending force that the PLGA film-PGN could withstand was over 55 times higher than that of the HEAL ALL film (a commonly used commercial GBR membrane). PLGA film-PGN also promoted the proliferation and osteogenic differentiation of rBMSCs. According to a critical-size rat calvarial defect model, PLGA film-PGN maintained the space within the defect area and significantly enhanced bone formation 4 weeks after the surgery. To conclude, the study provided a novel perspective on GBR membrane design and the multifunctional PLGA film-PGN membrane demonstrated great potential for bone defect reconstruction.

Bone Regeneration Potential of Periodontal Ligament Stem Cells in Combination with Cold Atmospheric Plasma-Pretreated Beta-Tricalcium Phosphate: An In Vivo Assessment

In regenerative bone tissue medicine, combining artificial bone substitutes with progenitor cells is a prospective approach. Surface modification via cold atmospheric plasma (CAP) enhances biomaterial–cell interactions, which are crucial for successful bone regeneration. Using a rabbit calvarial critical-size defect model, we assessed the use of CAP-pretreated beta-tricalcium phosphate (β-TCP), alone or with periodontal ligament stem cells (PDLSCs), for bone regeneration. Histological and histomorphometric analyses at two and four weeks revealed significantly improved bone regeneration and reduced inflammation in the CAP-treated β-TCP with PDLSCs compared to β-TCP alone. Immunohistochemical analysis also showed an increase in the bone healing markers, including bone morphogenic proteins 2 and 4, runt-related transcription factor 2, collagen-1, and osteonectin, after two and four weeks in the CAP-treated β-TCP implants with PDLSC. This in vivo study demonstrates for the first time the superior bone regenerative capacity of CAP-pretreated β-TCP seeded with PDLSCs, highlighting the therapeutic potential of this combined approach in osteoregeneration.

Alkaline shear-thinning micro-nanocomposite hydrogels initiate endogenous TGFβ signaling for in situ bone regeneration

Recruiting endogenous stem cells to bone defects without stem cell transplantation and exogenous factor delivery represents a promising strategy for bone regeneration. Herein, we develop an alkaline shear-thinning micro-nanocomposite hydrogel (10-MmN), aiming to alkaline-activate endogenous TGFβ1 and achieve in situ bone regeneration. It contains polyethyleneimine (PEI)-modified gelatin, laponite nanoplatelets (LAP), a bicarbonate buffer with a pH of 10, and gelatin microspheres (MSs). PEI-modified gelatin plays a pivotal role in hydrogel fabrication. It endows the system with sufficient positive charges, and forms a shear-thinning nanocomposite matrix in the pH 10 buffer (10-mN) with negatively charged LAP via electrostatic gelation. For biological functions, the pH 10 buffer dominates alkaline activation of endogenous serum TGFβ1 to recruit rat bone marrow stem cells through the Smad pathway, followed by improved osteogenic differentiation. In addition, MSs are incorporated into 10-mN to form 10-MmN, and function as substrates to provide good attachment sites for the recruited stem cells and facilitate further their osteogenic differentiation. In a rat critical-sized calvarial defect model, 10-MmN exhibits excellent biocompatibility, biodegradability, hydrogel infusion and retention in bone defects with flexible shapes and active bleeding. Importantly, it repairs ~95% of the defect areas in 3 months by recruiting TGFβR2+ and CD90+CD146+ stem cells, and promoting cell proliferation, osteogenic differentiation and bone formation. The present study provides a biomaterial-based strategy to regulate alkalinity in bone defects for the initiation of endogenous TGFβ signaling, which can be extended to treat other diseases.

Collagen type I-based recombinant peptide promotes bone regeneration in rat critical-size calvarial defects by enhancing osteoclast activity at late stages of healing

IntroductionWe recently demonstrated the bone-forming potential of medium-cross-linked recombinant collagen peptide (mRCP) in animal models of bone defects. However, these studies were limited to a 4-week observation period; therefore, in the present study, we aimed to further evaluate mRCP as a suitable bone graft material for the alveolar cleft by analyzing its bone-forming potential, osteogenic-inducing ability, and biodegradation over an extended period of 12 weeks, using a rat critical-size calvarial defect model. MethodsUsing Sprague-Dawley rats, we created critical-size calvarial defects through a surgical procedure. The defects were then filled with 3 mg of mRCP (mRCP group) or 18 mg of Cytrans® (CA) granules, which has a carbonate apatite-based composition resembling natural bone, was used as a reference material (CA group). For negative control, the defects were left untreated. Bone volume, total bone volume (bone volume including CA granules), and bone mineral density (BMD) in the defect were assessed using micro-computed tomography (μ-CT) at 0, 4, 8, and 12 weeks after implantation. Using histomorphometric analyses of hematoxylin and eosin (H&E)-stained sections, we measured the amount of newly formed bone and total newly formed bone (new bone including CA granules) in the entire defect site, as well as the amount of newly formed bone in the central side, two peripheral sides (left and right), periosteal (top) side, and dura mater (bottom) side. In addition, we measured the amount of residual bone graft material in the defect. Osteoclasts and osteoblasts in the newly formed bone were detected using tartrate-resistant acid phosphatase (TRAP) and alkaline phosphatase (ALP) staining, respectively. ResultsBone volume in the mRCP group increased over time and was significantly larger at 8 and 12 weeks after surgery than at 4 weeks. The bone volume in the mRCP group was greater than that of the CA and control groups at 4, 8, and 12 weeks after implantation, and while the total bone volume was greater in the CA group after 4 and 8 weeks, the mRCP group had comparable levels of total bone volume to that of the CA group at 12 weeks after implantation. The BMD of the mRCP group reached similar levels to native calvaria bone at the same time point. H&E-stained sections revealed a larger amount of newly formed bone 12 weeks after implantation in the mRCP group compared to that of the CA and control groups. The total newly formed bone at 12 weeks after implantation was on par with that in the CA group. Furthermore, at the defect site, the area of newly formed bone was larger on the peripheral and dura mater sides. Notably, the number of osteoclasts in the mRCP group was higher than in the CA and control groups and peaked 8 weeks after implantation, which coincided with the timing of the greatest resorption of mRCP. Although the ALP-positive area was greater in the mRCP group compared to other groups, we did not detect any significant changes in the number of osteoblasts over time. ConclusionThis study demonstrated the bone-forming potential of mRCP over an extended period of 12 weeks, suggesting that mRCP sufficiently resists resorption to promote bone formation through induction of osteoclast activation in the late stages of the healing period.

In vivo evaluation of bone regeneration using ZIF8-modified polypropylene membrane in rat calvarium defects.

The profound potential of zeolitic imidazolate framework 8 (ZIF8) thin film for inducing osteogenesis has been previously established under in vitro conditions. As the next step towards the clinical application of ZIF8-modified substrates in periodontology, this in vivo study aimed to evaluate the ability of the ZIF8 crystalline layer to induce bone regeneration in an animal model defect. Following the mechanical characterization of the membranes and analysing the in vitro degradation of the ZIF8 layer, in vivo bone regeneration was evaluated in a critical-sized (5-mm) rat calvarial bone defect model. For each animal, one defect was randomly covered with either a polypropylene (PP) or a ZIF8-modified membrane (n = 7 per group), while the other defect was left untreated as a control. Eight weeks post surgery, bone formation was assessed by microcomputed tomography scanning, haematoxylin and eosin staining and immunohistochemical analysis. The ZIF8-modified membrane outperformed the PP membrane in terms of mechanical properties and revealed a trace Zn+2 release. Results of in vivo evaluation verified the superior barrier function of the ZIF8-coated membrane compared with pristine PP membrane. Compared with the limited marginal bone formation in the control and PP groups, the defect area was almost filled with mature bone in the ZIF8-coated membrane group. Our results support the effectiveness of the ZIF8-coated membrane as a promising material for improving clinical outcomes of guided bone regeneration procedures, without using biological components.

LncRNA HOTAIRM1 promotes dental follicle stem cell-mediated bone regeneration by regulating HIF-1α/KDM6/EZH2/H3K27me3 axis.

Large bone defect reconstruction undergoes hypoxia and remains a major practical challenge. Bone tissue engineering with a more promising stem cell source facilitates the development of better therapeutic outcomes. Human dental follicle stem cells (hDFSCs) with superior multipotency, osteogenic capacity, and accessibility have been proven a promising cell source for bone regeneration. We previously identified a novel long noncoding RNA (lncRNA), HOTAIRM1, to be highly expressed in hDFSCs. Here we found that HOTAIRM1 overexpressed hDFSCs promoted bone regeneration in rat critical-size calvarial defect model. Mechanically, HOTAIRM1 was induced in hDFSCs under hypoxic conditions and activated HIF-1α. RNA-sequencing analysis indicated that HOTAIRM1 upregulated oxygen-sensing histone demethylases KDM6A/B and suppressed methyltransferase EZH2 via targeting HIF-1α. The osteogenic differentiation of hDFSCs was accompanied with demethylation of H3K27, and HOTAIRM1 overexpression decreased the distribution of H3K27me3 in osteogenic genes, including ALP, M-CSF, Wnt-3a, Wnt-5a, Wnt-7a, and β-catenin, thus promoted their transcription. Our study provided evidence that HOTAIRM1 upregulated KDM6A/B and inhibited EZH2 in a HIF-1α dependent manner to enhance the osteogenesis of hDFSCs. HOTAIRM1-mediated hDFSCs may serve as a promising therapeutic approach to promote bone regeneration in clinical practice.

Effect of lipoxin A4 on the osteogenic differentiation of periodontal ligament stem cells under lipopolysaccharide-induced inflammatory conditions.

Lipoxin A4 (LXA4) has been identified as the braking signal of inflammation, but the specific role of LXA4 in regulating the regenerative potential of periodontal ligament stem cells (PDLSCs) remains unclear. The aim of this study was to investigate whether and, if so, how LXA4 improves the osteogenic differentiation of PDLSCs in a lipopolysaccharide (LPS)-induced inflammatory environment. We detected the effects of LXA4 on the osteogenic differentiation of PDLSCs in vitro and explored the bone regenerative potential of LXA4-treated inflammatory PDLSCs in vivo using a calvarial critical sized defect model in male rats. RNA sequencing, real-time PCR and western blot were performed to elucidate the relevant potential mechanisms. Results showed that LXA4 promoted the proliferation, migration and osteogenic differentiation of PDLSCs in vitro, and effectively improved the impaired osteogenic capacity of PDLSCs induced by LPS both in vitro and in vivo. Mechanistically, LXA4 significantly promoted the PI3K/AKT phosphorylation under inflammatory conditions. Additionally, LY294002 (a PI3K inhibitor) blocked the effect of LXA4, suggesting that the PI3K/AKT pathway is a key signaling pathway that mediates the effect of LXA4 on the osteogenesis of inflammatory PDLSCs. These findings indicate LXA4 may be a promising strategy for periodontal regeneration using inflammatory PDLSCs.