Developing design correlation for the prediction of critical power in rod bundles is indispensable for R&D of Reduced-Moderation Water Reactor (RMWR) which adopts a triangular tight-lattice fuel rod configuration and axially double-humped-heated profile. In this research, critical power correlation for tight-lattice rod bundles is newly proposed using 7-rod axially uniform-heated data, 7-rod and 37-rod axially double-humped-heated data at Japan Atomic Energy Research Institute (JAERI). For comparatively high mass velocity region, the correlation is written in local critical heat flux-critical quality type. For low mass velocity region, it is written in critical quality-annular flow length type. The standard deviation of ECPR (Experimental Critical Power Ratio) to the whole JAERI data (694 data points) is 6%. The correlation is verified by Bettis Atomic Power Laboratory data (177 points, standard deviation: 7.7%). The correlation is confirmed being able to give good prediction for the effects of mass velocity, inlet temperature, pressure and heated equivalent diameter on critical power. The applicable range of the correlation is: Rod number lower than 37, rod gap from 1.0 to 2.29 mm, heated length from 1.26 to 1.8 m, mass velocity from 150 to 2,000 kg/m2·s and pressure from 2 to 11 MPa.