Summary Loading up of liquids in wellbore has been recognized as one of the severe problems in gas production for many years. Accurate prediction of the problem is vitally important for taking timely measures to solve the problem. Although previous investigators have suggested several methods to predict the problem, results from these methods often show discrepancies. Also, these methods are not easy to use because of the difficulties with prediction of bottomhole pressure in multiphase flow. An accurate and easy-to-use method is highly desirable. This paper fills the gap. Starting from Turner's analysis for prediction of the minimum gas velocity for liquid removal, the minimum kinetic energy of gas that is required to lift liquid droplets was determined in this study. In order to compare gas kinetic energy with the minimum required kinetic energy, a four-phase (gas, oil, water, and solid particles) flow model was developed for mist flow. Applying the minimum kinetic energy criterion to the four-phase flow model resulted in a closed-form analytical equation for predicting the minimum gas-flow rate. The kinetic energy theory indicates that the controlling conditions for liquid drop removal in gas wells are bottomhole conditions rather than tophole conditions. Our case studies show that Turner's method with 20% adjustment still underestimates the minimum gas velocity for liquid removal, and the newly developed equation is more accurate than Turner's method. The new method is easier to use than other existing methods. This paper provides production engineers with a systematic approach to predicting the minimum gas-production rate for the continuous removal of water and oil from gas wells. Engineering charts are provided for two typical tubing sizes and wellhead pressures.