Cratonic Areas Research Articles

Intra‐Craton Faults Characteristics, Development and Its Hydrocarbon Accumulation Significance in Mesozoic Strata at Southwestern Ordos Basin, China

ABSTRACTThe Ordos Basin is among China's largest petroliferous basins, with its southwestern part being a key exploration area. Prior studies indicated that the basin's internal structure was relatively simple, featuring minor developmental faults and primarily stratigraphic–lithologic reservoirs. However, recent research has identified numerous strike‐slip faults in the basin, and their relationship to oil and gas accumulations remains unclear. This study, using integrated interpretations of field outcrops, imaging logging and 3D seismic reflection data, clarifies the characteristics, morphology and formation mechanisms of multi‐period faults in the southwestern Ordos basin. Additionally, the study investigates the relationship between these faults and oil and gas accumulations. Results show that Mesozoic fractures in the southwestern basin are primarily NE‐ and NW‐trending. Seismic profiles reveal that these faults exhibit complex geometries, including upright structures in the Middle to Upper Triassic and floral structures in the Cretaceous. Coherence slices show that Lower Jurassic faults have linear structures NE‐ and NW‐trending, while Cretaceous faults exhibit parallel linear structures ENE‐trending. The study of fault displacement and morphology suggests two evolutionary patterns for Mesozoic faults in the basin: layered development and basement‐activated faulting. The widespread ENE‐ and NW‐trending faults represent a specific mode of tectonic stress transfer in stable cratonic areas with minimal basement fault influence. Conversely, some ENE‐trending faults are significantly influenced by basement activation during various geological periods, penetrating deeply into strata and exhibiting distinct segmentation on a planar scale. This differential fault development results in an uneven distribution of Jurassic oil and gas reservoirs. Significant accumulations of Jurassic oil and gas are found in the ENE‐trending tension–torsional strike‐slip sections, whereas many NW‐trending faults may negatively impact oil and gas reservoirs. This study elucidates the characteristics of Mesozoic faults in the southwestern Ordos Basin, offering valuable guidance for oil and gas exploration and development in the region.

Sedimentary records of liquefaction from central Kerala (southwestern India), as earthquake indicators in a cratonic area

Far from the plate boundaries, the seismogenic zones within the cratonic areas of Indian land mass had remained largely undetected. The moderate earthquakes in such areas have proved to be hugely damaging because of their infrequency and consequent lack of societal preparedness. As the subtle geological expressions of tectonism make identifying hazardous zones in cratonic areas difficult, it is important to develop locally appropriate geological criteria to isolate potential seismic source zones. Although seismically induced liquefaction preserved in the sedimentary sections is useful as an earthquake proxy, its scope remains underestimated in cratonic regions. Here we offer a field-based methodological approach to mapping liquefaction features from such an area, located south of the Bharathapuzha River in the southwestern part of the Indian craton. We used the field data to constrain the near-field earthquake potential. The earthquake-induced soil liquefaction, in the form of sand dikes and sills, was identified within an area of roughly 100 km2, and the available data suggest two episodes of liquefaction – the one between 2.0 ka and 2.5 ka, and a later event around 0.78 ka BP. The spatial distribution and the dimension of the soil liquefaction features, in an area known for the occasional spurt in minor earthquakes in recent times, are suggestive of a potential seismic source in the region that can generate earthquakes of moment magnitudes (Mw) ranging from 5.5 to 6.5.Thus the present observation is a vital input for constraining the region’s seismic hazard and the methodology developed here can be used in other areas of unknown potential.

Evolution of the transtensional Barreirinhas pull-apart system in the Brazilian Equatorial margin and its correlation with the African conjugate counterpart

The Barreirinhas pull-apart system encompasses marginal basins in divergent and transform margin segments in the central sector of the Brazilian Equatorial Margin and its African conjugate counterpart. This ancient pull-apart system evolved through transtensional strike-slip motion within a highly heterogeneous crystalline basement affected by multiple rift phases. The geometry and development of pull-apart structural elements during the final rifting phase before continental breakup and the mechanisms and extent to which they were influenced by preexisting crustal heterogeneities are comprehensively addressed using an extensive database of potential field (magnetic and gravity) and 2D seismic reflection data. We also assess the lithospheric thermomechanical conditions and their influence on transtensional extension throughout Curie Point Depth, Heat Flow, and Moho depth, derived from potential field data and published seismological models. Plate reconstruction of Brazilian and African equatorial margins based on gravity patterns and comparison with sandbox analog models allow a 3D synoptic model to reveal the Barreirinhas pull-apart system evolution during the Equatorial Atlantic opening. During the rift phase I, the location of major grabens was controlled by favorably oriented Neoproterozoic shear zones, while the cooler, stronger, and thicker crust beneath cratonic areas formed the western barrier to strike-slip rift activity during rift phase II. This same geological domain anchored the onset of the pull-apart system in the last rift phase III, whose principal displacement zones developed along the extensive oceanic fracture zones linked by sigmoidal fault systems. Toward the end of the rift phase, a large asymmetric lozangle to a lazy-Z-shaped, pull-apart basin developed above low overlapping ∼90°, releasing stepover in oblique transtensional strike-slip motion.

Crustal and upper mantle structure beneath South America from Rayleigh wave analysis

A review of the S‐velocity structure beneath South America, for the crust and upper mantle, is performed using a recent methodology based on Rayleigh wave analysis, and a new 3D S‐velocity model (from 0 to 400 km depth) is achieved for this study area. The precise location and structure of the asthenosphere have been both determined from this new model, which have not been obtained in other previous studies, allowing to know how the different geological units that compose South America are delimited in terms of S‐velocity and lithosphere thickness. For example, the highest S‐velocities and the thickest lithosphere of the cratonic areas, are determined at the east of the Amazonian Craton and the São Francisco Craton. The lithosphere beneath the Guyana Shield is thinner than beneath the Central Brazil Shield, and the lithospheric root of the Amazonian Craton is determined deeper than the São Francisco Craton. The lithosphere at the east of the Central Brazil Shield is the thickest (~200‐km thick). Another interesting feature depicted in terms of S‐velocity and lithosphere thickness is the Transbrasiliano Lineament, which is determined in the crust and the upper mantle, confirming that it is not just a surface feature but a deep feature.

Geophysical insights into basement faults influencing basin evolution: A case study from Tennant Creek Block, North Australian Craton

Geophysical interpretation and modelling of the poorly exposed Proterozoic basement rocks of the Tennant Creek Block in the North Australian Craton elucidated the distribution, location, connectivity, and overprinting relationships of regional faults. The prominent structural grain within the basement comprises west-northwest-striking faults that commonly bound geophysically defined domains of the Warramunga Formation and felsic plutons of the Tennant Creek Supersuite. Constrained by seismic reflection data, forward models of gravity and magnetic data identified several faults as major structures that link into a shallow south-dipping structure at approximately 20 km depth. The modelling also reveals a 20 km wide and 14 km southward deepening half-graben bounded by a northeast dipping normal fault. The half-graben forms a sub-basin filled with the Ooradidgee Group at the top of the basement stratigraphy. The west-northwest-trending structural grain of the basement is not reflected in the Tomkinson Creek Group in the overlying younger basin. The younger basin has dominant north-oriented faults and basement highs. This suggests basement structures had limited influence in controlling the evolution of younger basins in this region. Our approach has wider relevance, addressing similar challenges encountered in other cratonic areas globally, such as India and Africa, where sedimentary cover obscures critical aspects of basement architecture and tectonic evolution. This underscores the broader significance of our methodology in advancing the understanding of Precambrian terranes.

A Continental Model of Curie Point Depth for China and Surroundings Based on Equivalent Source Method

AbstractThe Curie Point Depth (CPD) marks a significant temperature boundary (∼580°C) within the Earth's lithosphere. However, there has been ongoing debate regarding its spatial distribution. In this research, we utilized the Equivalent Source Method (ESM) based on Gauss‐Legendre integration and data obtained from the EMM2017 model, along with a five‐layer susceptibility model, to generate a 0.5° × 0.5° grid of continental CPD distribution for China and surroundings. The average CPD in the study area is 30.4 km, which is slightly shallower than the average depth of global continental Moho (∼33 km). Notably, stable and cold cratonic basins, such as the Tarim Basin and the Sichuan Basin, exhibit deep CPD of ∼45 km. In contrast, the North China Craton, which has experienced significant tectono‐thermal activity since the Late Mesozoic, shows moderate CPD of ∼30 km and a gradual uplift from west to east. The Tuva‐Mongol orocline within the Central Asian Orogenic Belt, the Deccan Volcanic Province in the Indian subcontinent and the Eastern Yangtze Craton have shallow CPD of ∼20 km. We estimate the surface heat flow by CPD, and the result is consistent with measurements within a RMSE of 18.1 mW/m2. When comparing the CPD with Moho, we find that the CPD may lie below Moho in stable and cold cratonic areas. In comparison to two recent global CPD models, our regional model demonstrates better alignment with tectonic features.

Tectono-stratigraphic and sedimentological analysis of the Early to Middle Devonian Floresta Formation: Insights from the Floresta Massif, Northern Andes, Colombia

A comprehensive tectono-stratigraphic and sedimentological investigation of Early to Middle Devonian rocks was conducted in the southern Floresta Massif and adjacent regions in the Northern Andes of Colombia. A substantially reduced thickness of the Floresta Formation compared to prior studies is suggested here, attributable to pronounced stratal deformation and the prevalence of recumbent folds throughout the area. The deformation in the Floresta Formation manifests as atypical recumbent folds, diverging from the structural behavior observed in the underlying and overlying strata of the El Tibet and Cuche formations respectively, which exhibit minimal deformation. Our findings also reveal that the Floresta Formation accumulated under shallow-water platform conditions, subject to eustatic sea-level fluctuations. This resulted in distinct episodes of carbonate and siliciclastic deposition, with terrigenous sediments sourced from continental origins, potentially encompassing a combination of cratonic areas and uplifted blocks. The identification of a plausible stage of carbonate silicification signifies a post-diagenetic transformation. The sedimentary rocks of the Floresta Formation reached the upper epizone conditions, in proximity to the transition between the epizone and the upper anchizone, which suggests a maximum depth and temperature of ~5-7 km and ~300 °C, respectively. This contribution provides new insights into the geological history of the region, emphasizing the importance of scrutinizing Early to Middle Devonian rocks within the broader geological context of the Northern Andes.

Zirconium/hafnium fractionation and rare earth element systematics in sub-cratonic garnet pyroxenites, Norway

Ten previously studied garnet pyroxenites and one eclogite from orogenic peridotites in the Western Gneiss Region of Norway were analysed for whole-rock major and trace and mineral trace elements to characterise the evolutionary stages of the East Greenland sub-cratonic mantle. A continuous range of whole-rock MgO contents (17–30 wt.%) correlates inversely with hbox {Na}_2hbox {O}, hbox {Al}_2hbox {O}_3, and CaO contents. In contrast, rare earth element (REE) compositions allow the samples to be devided into two types. Type I samples have relatively flat primitive mantle (PM) normalised REE patterns (0.4-6.8 times PM values) with minor fractionation of middle–heavy REEs. Type II samples are simlar to type I samples but have higher light REE contents (6.1–57 times PM values) that reflect metasomatic enrichment. Whole-rock Zr contents (1–27,upmu hbox {g},hbox {g}^{-1}) and Zr/Hf ratios (17–39) are positively correlated. Type I samples have low Zr/Hf ratios that mostly differ from type II samples, indicating that metasomatism modified the initially sub-chondritic Zr/Hf ratios. Garnet Zr–Zr/Hf–Y–Ti systematics suggest that metasomatic enrichment transformed the type I samples into type II samples, consistent with processes observed in other cratonic areas (e.g., the northern East European Platform and the Kaapvaal Craton). The formation of type I pyroxenite in dunite from a melt at sim 100,text {km} depth implies the sub-chondritic Zr/Hf ratios were inherited from that melt. Such melts are thought to form by melting of garnet-bearing, melt-depleted mantle, which is consistent with models for recycling of Archaean palaeo-oceanic crust throughout the mantle prior to the formation of the sub-cratonic lithosphere beneath East Greenland.

Geochemistry as a Clue for Paleoweathering and Provenance of Southern Apennines Shales (Italy): A Review

The southern Apennines (Italy) chain is a fold-and-thrust belt mainly derived from the deformation of the African–Apulian passive margin where shallow-water, basinal, and shelf-margin facies successions, including fine-grained sediments, occur. Here, we provide a review of the geochemistry of Meso–Cenozoic shales from the Lagonegro basin to elucidate provenance and paleoweathering. The different suites of these shales are dominated by 2:1 clay minerals and are Fe shales and shales. An R-mode factor analysis suggests Ti, Al, and LREE (F1) and K2O-MgO (F2) covariance, likely related to the illite → smectite → kaolinite evolution during weathering. HREE and Y are distributed by phosphate minerals, suggesting LREE/HREE fractionation. The CIA paleoweathering proxy rules out non-steady-state weathering conditions and indicates that the source area was affected by moderate to intense weathering. The paleoprecipitation values derived from the CIA-K and CALMAG indices show median values in the 1214–1610 mm/y range. The Eu/Eu*, Sm/Nd, and Ti/Al provenance ratios point toward a UCC-like source excluding any mafic supply and suggest that the Lagonegro basin was connected, through a southern area, with the African cratonic area. However, the Eu/Eu* median value of the southern Apennine shales is quite similar to the value of the Archean shales, possibly indicating a less differentiated component. This is consistent, in many samples, with the value of the (Gd/Yb)ch ratio, suggesting that the shales likely incorporated ancient sediments derived from African Archean terranes through a cannibalistic process.

Phanerozoic Tectonic and Sedimentation History of the Arctic: Constraints From Deep‐Time Low‐Temperature Thermochronology Data of Ellesmere Island and Northwest Greenland

AbstractRocks exposed along both sides of the Smith Sound in Ellesmere Island and NW Greenland record the tectono‐sedimentary evolution of the whole Phanerozoic, including two periods of mountain building—the Palaeozoic Ellesmerian Orogeny and the Palaeogene Eurekan Orogeny—and the formation of two major sedimentary basins, the Franklinian and the Sverdrup Basins. We used geo‐ and thermochronology and apatite chemistry data to unravel this evolution. Apatite fission track and (U‐Th)/He dates vary strongly from >600 to <100 Ma. We present internally consistent thermal history models, which allow to explain the data variations by a unitized exhumation and burial history. Our models suggest that the cratonic areas were buried beneath a several km‐thick succession of Franklinian Basin deposits. During the Ellesmerian Orogeny, the craton acted as sediment source, as also suggested by the composition of apatite and by U‐Pb ages of zircon contained in Devonian foreland sediments. The Ellesmerian foreland was buried by up to 4–5 km thick strata on top of the preserved sedimentary rocks. During the Triassic, the Sverdrup Basin strongly widened and extended at least ∼370 km further toward the east, as compared with previous reconstructions of the basin based on the preservation of Triassic deposits. Thermal history modeling suggests Late Cretaceous to early Cenozoic reheating, which may be caused by deposition associated with the Eurekan Orogeny and/or enhanced heat flow associated with continental breakup. Our data also show that low‐temperature thermochronology is not suitable for resolving potential strike‐slip movements along the Wegener Fault.

The Thermal Regime of NW Canada and Alaska, and Tectonic and Seismicity Consequences

AbstractNW Canada and Alaska are the continuation of the North American Cordillera through Mexico, western USA and western Canada. I show that they have similar thermal regimes and thermal control of tectonics and seismicity. I first summarize the multiple constraints to crust and upper mantle temperatures and then discuss some consequences. There are bimodal crust and upper mantle temperatures characteristic of most subduction zones: cool forearc, uniformly hot backarc (Yukon Composite Terrane to Southern Brooks Range, and Mackenzie Mountains), and stable cratonic backstops (Arctic Alaska Terrane and Canadian Shield). The main constraints are as follows: (a) Heat flow measurements, (b) Temperature‐dependent upper mantle velocities and seismic attenuation, (c) Temperature‐dependent topographic elevations; thermal isostasy, (d) Depth and temperature of the seismic lithosphere‐asthenosphere boundary (LAB), (e) Origin temperature and depth of craton kimberlite xenoliths, (f) Geochemically inferred source temperature and depth of recent volcanic rocks. (g) Depth to the magnetic Curie temperature, (h) Depth extent of seismicity. The backarc lithosphere is thin, LAB at 50–85 km and ∼1,350°C ± 25°C. Moho temperatures at 35 km are 850°C ± 100°C compared to cool cratonic areas of 400°C–500°C. The consequences include the following: (a) Thin and weak backarc lithosphere that accommodates pervasive tectonic deformation indicated by wide‐spread seismicity and GPS‐defined motions, in contrast to the stable cratonic regions; (b) Weak backarc lower crust that flattens the Moho and allows detachment and thrusting of the upper crust over the cold strong Arctic Alaska Terrane and Canadian Shield. This article provides a model for how to estimate deep temperatures from multiple constraints.

Tectonic setting of Kaladgi-Badami basin and its possible connection with adjacent Proterozoic basins, Karnataka, India

Sedimentary rock types and basin geometries are interrelated with characteristic tectonic settings. In fact, sedimentation pattern at central stable cratonic areas are not same as that on continental margins. Kaladgi-Badami (KB) basinal feldspathic arenite (i.e., arkose) dominated rocks contain more plagioclase than potassium feldspar unlike the opposite scenario of Phanerozoic sandstones. Tectonic history of the KB basin has been interpreted since basin development, sedimentation through interrupting hiatus, tectonic reworking, redeposition at later developed depocenters and later exhumation, erosion, tectonism till Deccan volcanism and finally latest configuration. As per the International commission of Stratigraphy (ICS), principles of stratigraphic classification and usages of terminology of fundamental lithostratigraphic unit ‘Formation’ is reexamined in this paper. The definition of Formation as “smallest mappable rock unit with a definite lithologic characteristic that allow it to be distinguished from other such units” is improperly used because without mentioning a specific scale every unit is mappable or traceable. Therefore, the minimum mappable unit means the unit which can be at least visible in a scale in which entire basin can be seen. Based on this slight modification is proposed in the stratigraphy of KB basin. Geochronology based radiometric stratigraphy is best tool for determination of time sequence of geological events. However, it is always a matter of concern that dating methods and materials are often not suitable in sedimentary geology. In case of passive rifted sedimentary basins like Kaladgi, Badami and Bhima of the Dharwar Craton, there is negligible igneous events and indirect dating methods are mostly available. Detrital zircon dating can give maximum age or provenance age, which cannot be of much use. However, there are other indirect tools, which are already utilized by several workers earlier and based on the reviews and present observation and mapping compilation it is proposed that KB and Bhima basins used to be a single basin, and later tectonism followed by Deccan volcanism affected the present geographic continuity. Since the distance between westernmost Bhima basinal rocks and easternmost KB basinal rocks near Mudhebihal is nearly around 15km, it is logical to consider that these were geographically connected, because there is an intense faulting near to these basin margins.

Gold source and ore-forming process of the Linglong gold deposit, Jiaodong gold province, China: Evidence from textures, mineral chemical compositions and sulfur isotopes of pyrite

The Linglong gold orefield is located northwest of the Jiaodong gold province, in the eastern North China Craton (NCC) area. It consists of over 10 gold mines with a total gold resource of approximately 1000 t, and gold mineralization occurs in gold-quartz veins. The Linglong gold deposit underwent four stages of ore-forming processes namely: Pyrite-quartz (stage I) – milky-white quartz vein with euhedral pyrites, Quartz-pyrite (stage II) – smoky quartz veins with euhedral-subhedral pyrites, Polymetallic sulfides (stage III) – quartz veins with large amounts of polymetallic sulfides (pyrite, pyrrhotite, sphalerite, galena), hematite, and native gold, and the Quartz–carbonate (stage IV) – calcite-quartz veins. This study focuses on the investigation of pyrites from three main mineralization stages (I-III), exploring their textures, in-situ major and trace element concentrations, and in-situ sulfur isotopic compositions.The study examined pyrite through various methods including BSE and EMPA major element, LA-ICP-MS trace element, and LA-MC-ICP-MS sulfur isotope analyses. Pyrite from three distinct stages of ore-forming processes were analyzed. Pyrites from stage I (Py-I) exhibited euhedral crystals with homogeneous brightness in the BSE, lacked mineral inclusions, porous microtextures, and oscillatory zones. Py-I possessed low contents of Au, Ag, As, Bi, Cu, Sb, Zn, Co, and Ni. Pyrites from stage II (Py-II) showed fine-coarse grains and euhedral-subhedral features with slight fractures, similar to Py-I, however, had the higher concentrations of As and Sb. Pyrites from stage III (Py-III) were found in the quartz-polymetallic sulfide veins and exhibited subhedral to anhedral features and more significant concentrations of metallic elements, particularly Au and As. The δ34S values of Py-I, Py-II and Py-III were in the ranges of 6.76‰–7.47‰, 6.11‰–7.27‰ and 6.07‰–8.33 ‰, respectively. Analysis of the texture and geochemical composition of pyrite suggested that invisible gold was primarily present in pyrite in the form of solid solution (Au+), accompanied by a small amount of nano-form gold. The ore-forming fluids that led to this mineralization were mostly derived from mantle-derived mafic magma mixed with some minor metamorphic sedimentary material. A decrease in fluids temperature, water–rock interactions and fluid boiling led to the depositions of sulfides and gold. In the Late Mesozoic, lithospheric delamination of the eastern block of the NCC triggered decompression and melting of the upwelling asthenospheric mantle resulting in partial melting of the lithospheric mantle. This lithospheric mantle-derived mafic magma provided the ore-forming fluids for large-scale gold mineralization in the Jiaodong gold province.

Insights into the evolution of the southeastern Dom Feliciano Belt and its connection to the Pan-African Orogeny based on new U-Pb and Lu-Hf zircon data

The Neoproterozoic supracrustal units of the Dom Feliciano Belt in southern Brazil and eastern Uruguay provide a record of the tectonic evolution of the Brasiliano/Pan-African cycle in terms of sedimentation, deformation, and metamorphism during the western Gondwana supercontinent assembly. From the northern Punta del Este Terrane (Jaguarão Domain) and neighboring Herval Complex were acquired new LA-ICPMS U-Pb and Lu-Hf zircon data from significant samples of metasedimentary rocks and intrusive granites. The central units of the domain are the Arroio Telho and Arroio Grande metasedimentary complexes, which have detrital zircon data ranging in age from 3.2 to 0.7 Ga, with prominent age peaks at 2.2–1.7 Ga, 1.5–1.0 Ga, and 1.0–0.7 Ga. The Herval Complex samples revealed a similar provenance of detrital zircon ages, with two main intervals of 1.5–1.1 Ga and 1.0–0.7 Ga, and also minor Paleoproterozoic (2.0–1.7 Ga) and Archean (2.8–2.4 Ga) ages. The maximum depositional age of the supracrustal complexes is constrained to age populations between 700 and 650 Ma. The mylonitic intrusive peraluminous granites yielded crystallization ages of ca. ∼570 Ma. The Neoproterozoic metamorphic zircon overgrowths range from 680 to 570 Ma. The Lu-Hf data from the meso- to Paleoproterozoic zircons have εHf(t) values ranging from −10 to +10, with the dominance of slightly positive results, and Hf(t) model ages from Paleoproterozoic to Archean. The εHf(t) values in Neoproterozoic zircons are dominantly negative (−15 to +5) with meso- to Paleoproterozoic Hf(t) model ages. These results demonstrate that sedimentary deposition ceased and underwent metamorphism during the development of the Cryogenian/Ediacaran arc-related magmatism of the Dom Feliciano belt. Given the scarcity of Mesoproterozoic rocks in the Mantiqueira Province and nearby cratonic areas, the obtained data suggest that these detrital populations originated in southwestern African rocks. The Congo/Kalahari cratons (Africa) are the most likely source area for Paleoproterozoic and Archean detrital zircons. The geological context and isotopic results of the investigated supracrustal complexes point to a prior extensional tectonic setting during the Tonian (∼800 Ma), with regional deformation and metamorphism linked with the Dom Feliciano Belt accretionary and collisional stages (660–570 Ma).

Establishing Provenance from Highly Impoverished Heavy Mineral Suites: Detrital Apatite and Zircon Geochronology of Central North Sea Triassic Sandstones

A study of Triassic sandstones in the central North Sea, UK, has shown that combined detrital zircon and apatite geochronology and apatite trace element analysis is a powerful tool for reconstructing provenance for sandstones with diagenetically impoverished heavy mineral suites. Sandstones in the earlier part of the succession (Bunter Sandstone Member and Judy Sandstone Member) have characteristics that indicate derivation from Moinian–Dalradian metasediments affected by Caledonian tectonothermal events, in conjunction with a Palaeoproterozoic-Archaean source unaffected by Caledonian metamorphism. Palaeogeographic reconstructions indicate that the sediment cannot have been input directly from either of these cratonic areas. This, in conjunction with the presence of common rounded apatite, indicates that recycling is the most likely possibility. The zircon-apatite association in the younger Joanne Sandstone Member sandstones indicates derivation from lithologies with mid-Proterozoic zircons (either crystalline basement or metasediments in the Caledonian Nappes), subjected to Caledonian metamorphism to generate early Palaeozoic apatites. This combination is compatible with a source region in southern and western Norway. The low degree of textural maturity associated with the detrital apatite, together with the unimodal Caledonian age grouping, indicates the Joanne sandstones have a strong first-cycle component.

Sediments from Purana basins, India: Where were they derived from?

The present exposures of the (Mesoproterozoic to Neoproterozoic) Purana basins of Peninsular India occupy nearly 1.5 × 105 km2 area in the Indian subcontinent, with an equal area being concealed under younger cover or lost to ensuing erosion. These extensional basins evolved on the margins (& with basement) of the existing cratonic blocks during the ‘boring billion years’ of Earth history. They host nearly 0.8 million km3 of epicratonic compacted and lithified sediments derived by weathering and erosion of the adjoining cratonic blocks and deposited on their fringes. The volumetric contents of these basins and their temporal distribution are compiled. The relative distribution and secular variations of sediment contents from these basins appear to synchronise with global Proterozoic supercontinental assembly and dispersal cycles. A comparison of mass-transfer by the erosion of the provenance area and sedimentation in continent margin basins shows that the volumes preserved in the Purana basins are at least 2 magnitudes larger than what can be derived from adjoining cratonic areas within the Indian Subcontinent. Much wider continental masses as well as exhumation (aided by uplift) of km-scale magnitudes of the provenance areas are required to reconcile their volume. Possible linkages with other cratonic blocks within the contemporary supercontinental assemblies are required to resolve this discrepancy.

Episodic mafic dike swarms (2.0 and 1.7 Ga) in the Quadrilátero Ferrífero Province, Brazil: Implications for the refinement of the São Francisco Craton magmatic barcode and the North China link

Late Archean to Paleoproterozoic dike swarms crosscut the basement and supracrustal sequences of the São Francisco Craton. Their spatial distribution and orientation patterns, as paleomagnetic signature, provide key evidence to the positioning of the cratonic area in ancient paleocontinental reconstructions through the refinement of the “magmatic barcode”. Zircon U–Pb data from dikes in the cratonic domain of the Quadrilátero Ferrífero Mineral Province, in the southern of São Francisco Craton, allowed the recognition of two magmatic stages: a Rhyacian-Orosirian pulse, belonging to the Paraopeba swarm, and a Statherian pulse that belongs to the Pará de Minas II swarm. The Ediacaran Brasiliano Orogeny later affected dikes from both swarms.The Paraopeba swarm consists of pulses related to the Rhyacian-Orosirian orogenic cycle, with dikes providing U–Pb zircon ages of 2019 + 23–11, 1944 ± 29 and 1918 ± 12 Ma. The zircon εHf values from these dikes are predominantly negative, suggesting reworking of preexisting crust, whereas the TDM ages vary from 4000 to 2500 Ma, which can be interpreted as a long period of crustal residence. The Statherian Pará de Minas II swarm, with a U–Pb zircon age of 1717 ± 9 Ma, is chronocorrelated to the lower stratigraphic sequence of the Espinhaço rift basin. Zircon grains from this dike have predominantly positive εHf values and TDM model ages between 3050 and 1950 Ma. Unlike the Paraopeba swarm, the Pará de Minas magmatism is marked by a striking input of juvenile mantle material with minor crustal contamination. The Ediacaran Brasiliano tectono-thermal event caused isotopic disturbance in both Paraopeba and Pará de Minas II swarms, resulting in lower intercepts at 595 ± 65 and 584 ± 27 Ma, respectively.Our data pinpoint dike emplacement related to tectonic events described in the southern of São Francisco. In the final stages of Rhyacian orogenic cycle, at ca. 2019–1918 Ma, data suggests an important crustal contamination. Thereafter, a crustal rifting event at ca. 1717 Ma involved dike swarm emplacement with magmatic source from a mantle plume. The Rhyacian-Orosirian ages obtained here are the first zircon U–Pb geochronological data presented for the Paraopeba dike swarm and allow for a refinement of the São Francisco Craton barcode, reinforcing previous suggestions of proximity with the North China Craton crosscut by the similarly aged Hengshan and Xiwangshan/Xuwujia dike swarms, whether or not those two cratonic pieces were part of the Columbia supercontinent.

Stable Carbon Isotopic Composition of Selected Alkylnaphthalenes and Alkylphenanthrenes from the Tarim Oilfields, NW China

The present study aimed firstly to use a set of crude oil samples and a dataset to provide new evidence for source input contribution in selected aromatic isomers for discrimination of oils from three oilfields from Tarim Basin and identify the key factor (s) controlling the isotope composition. Thus, the present research showed that the δ13C values of alkylnaphthalenes and alkylphenanthrenes plotted against P/DBT and Ga/C30H ratios is a reliable and convenient tool for discrimination of organic matter variations in different oilfields. More importantly, molecular ratios and different diagram plots revealed that the selected oil samples would be derived from a mixing of indigenous organic matter from the terrestrial (in Kuqa area) and marine (in the cratonic area) depositional environments prior the apparition of the Yakela Faulted Uplift. Thus, Daolaoba, Yakela, and Tahe oils were made up of organic materials from both marine and terrestrial sources. Furthermore, marine organic matter input dominates oils from the Tahe and Yakela, with a minor input from terrestrial sources. The oils from Daolaoba were assigned to be from a mixing of marine and terrestrial material inputs. The controlling factors assessment revealed that biodegradation has an insignificant effect on the set of oils; however, the source input and the thermal maturity together control the isotopic compositions of individual aromatic isomers from these three oilfields.

Effects of multi-extensional tectonics in a cratonic area: 3D numerical modeling and implications for the Congo basin

Different hypotheses have attempted to explain the long-lasting subsidence of the intracratonic basins, characterized by prolonged intervals of low rate subsidence, alternating with episodic accelerations in subsidence rates. Among them, the Congo Basin (CB) occupies a large part of the Congo Craton, derived from the amalgamation of different cratons. Previous studies demonstrated that the CB formed from a rift phase, during the late Mesoproterozoic. This extensional phase could have been the effect of the action of a slow multi-directional extension on a cratonic lithosphere, which has induced the initial subsidence of the CB. We investigated this tectonic scenario with 3D numerical thermomechanical models, using bi-directional N-S/E-W intra-cratonic extension with uniform velocity applied for up to 200 Myr. We assumed that the amalgamation of several cratonic blocks left a rectangular region with warm and more fertile lithosphere in the model centre, having a size of 10 % or 20 % of the total model area. Numerical results show the formation of an almost circular subsided area in the central part of the model, due to the crustal and lithospheric thinning above the asthenosphere upwelling. We also observe series of topographic highs and lows inside the subsided area and significant uplift at the transition zones towards the almost undeformed cratonic parts. At a later stage (>100 Myr), the topographic depression becomes intersected by two nearly orthogonal, elongated rift structures (quadruple junction), which tend to raise their surface topography. These features well represent the first order heterogeneity characterizing the CB basement, considering that its depth has been further modified by tectonic and climatic events. The formed structures are input for static and dynamic forward gravity models and the outputs compared with the present-day gravity field. In this way, the consistency between the modelled and observed main structures of the CB is demonstrated.

Petrogenetic and textural classification of kimberlites and lamproites of the Brauna Kimberlitic Field: Implications for potassic/ultrapotassic magmatism in the São Francisco Craton

Kimberlitic rocks are known in the São Francisco Craton, Brazil, since the 1980s when the De Beers started a prospective work in the Itapicuru River Greenstone Belt. However, 40 years later, the scientific knowledge about these occurrences is still very restricted. This paper presents new geological and petrographical data for the pipes of the “Brauna Kimberlitic Field”. These rocks are exposed in a strongly eroded cratonic area of Northeastern São Francisco Craton and as expected, represent the deepest parts of these bodies, showing textural aspects and components typical of coherent volcanic rocks emplaced at deep crustal levels.The kimberlitic magmatic event resulted not only in the emplacement of macrocrystalline hypabyssal olivine archetypal kimberlites, here represented by the B3 (678–682 Ma) and B4 pipes (s.s. Former type 1 kimberlites), but also in hypabyssal macrocrystalline pyroxene-phlogopite- lamproite intrusions, as exposed in the B7 (641 Ma) pipe of the Brauna Field. Both magmas are rich in mantle-xenoliths and have potential for diamond ores. The observed features suggest the presence of multiple magmatic pulses – which acted as deep samplers, recorded in the diversity of xenoliths and xenocrysts – thus demonstrating the potential of these rocks for the comprehension of the first stages of evolution of the Early Earth as well as for understanding the formation of the metasomatized lithospheric mantle below the São Francisco Craton.The new data for these hypabyssal facies, macrocrystic pulse of kimberlitic rocks in the Brauna Field, São Francisco Craton, Brazil, can be used to characterize the petrographic and mineralogical heterogeneities of a Neoproterozoic alkaline-ultrapotassic magmatic event that shows a kimberlite-lamproite transitional nature. The petrogenetic knowledge presented for the São Francisco Craton kimberlites and lamproites – accordingly to the most recent classifications for these rocks – include textural-genetic data, geotectonic environment, and intrusive-spatial context, setting these rocks at the stage 5 of present-day kimberlite classification scheme. Moreover, the integration of such data and the close spatial associations of kimberlites, lamproites, lamprophyres, syenites and shoshonites allowed to create a solid interpretation of the rock formation processes that correlates these Neoproterozoic alkaline ultrapotassic magmas to the reactivation of ancient mantle conduits in a thick lithosphere that overlies a previously metasomatized mantle and intrude a metal-rich craton environment.