Cr Concentration Research Articles

Pre-oxidation of porous ferritic Fe22Cr alloys for lifespan extension at high-temperature

Pre-oxidation of porous ferritic Fe22Cr alloys was extensively studied in this paper. Weight gain measurements and SEM analysis revealed that pre-oxidation performed at 900°C for 40 min increased the lifespan of the alloy. A Cr evaporation study did not disclose any significant influence of the pre-oxidation process on the Cr content in the alloy. For a more detailed assessment, TEM imaging and X-ray tomography measurements of pre-oxidized samples were performed. These analyses showed that alteration in the grain and grain boundary diffusion fluxes might be the key for explaining the corrosion prevention role of pre-oxidation.

The competition of heavy metals between hyporheic sediments and microplastics of driving factors in the Beiluo River Basin

Both sediments and microplastics (MPs) are medias of heavy metals (HMs) in river ecosystems. This study investigated HMs (Mn, Cr, V, As, Cu, Co, Cd, Pb, and Ni) concentration and driving factors for competitive enrichment between hyporheic sediments versus MPs. The medias basic characteristics indicated that the sediments were mostly sand and rich in Fe2O3; three polymer types were identified, with blue, fragment, less than 500 µm being the main types of MPs. The results have shown that the average content of extracted HMs in MPs was much higher than that of the same metals accumulated in sediments. HMs in sediments and MPs reached heavily polluted at some points, among which As and Cd were ecological risks. Electrostatic adsorption and surface complexation, and biofilm-mediated and organic matter complexation were the interaction mechanism of HMs with sediments and MPs. Further, the driving factors affecting the distribution of HMs in the two carriers were analyzed by multivariate statistical analysis. The results demonstrated that carrier characteristics, hydrochemical factors, and the inherent metal load of MPs were the main causes of the high HMs content. These findings improved our understanding of HMs fate and environmental risks across multiple medias.

Restoration of the soil fertility under Cr(VI) and artificial drought condition by the utilization of plant growth-promoting Bacillus spp. SSAU2.

The study explores the potential of an indigenous halo-tolerant microbe identified as Bacillus spp. SSAU-2 in enhancing soil fertility and promoting plant growth for sustainable agricultural practices under the influence of multiple abiotic stresses such as Cr(VI), high salinity, and artificial drought condition. The study investigated various factors influencing IAA synthesis by SSAU-2, such as pH (5 to 11), salinity (10 to 50g/L), tryptophan concentration (0.5 to 1%), carbon (mannitol mand lactose), and nitrogen sources (peptone and tryptone). The highest IAA concentration was observed at pH 10 (1.695mg/ml) and pH 11 (0.782mg/ml). IAA synthesis was optimized at a salinity level of 30g/l, with lower and higher salinity levels resulting in decreased IAA concentrations. Notably, the presence of mannitol and lactose significantly augmented IAA synthesis, while glucose and sucrose had inhibitory effects. Furthermore, peptone and tryptone played a pivotal role in enhancing IAA synthesis, while ammonium chloride exerted an inhibitory influence. SSAU-2 showed a diverse array of capabilities, including the synthesis of gibberellins, extracellular polymeric substances, siderophores, and hydrogen cyanide along with nitrogen fixation and ammonia production. The microbe could efficiently tolerate 45% PEG-6000 concentration and effectively produce IAA in 15% PEG concentration. It could also tolerate high concentration of Cr(VI) and synthesize IAA even in 50ppm Cr(VI). The findings of this study provide valuable insights into harnessing the potential of indigenous microorganisms to promote plant growth, enhance soil fertility, and establish sustainable agricultural practices essential for restoring the health of ecosystems.

A Deep Learning Approach for Chromium Detection and Characterization from Soil Hyperspectral Data.

High levels of chromium (Cr) in soil pose a significant threat to both humans and the environment. Laboratory-based chemical analysis methods for Cr are time consuming and expensive; thus, there is an urgent need for a more efficient method for detecting Cr in soil. In this study, a deep neural network (DNN) approach was applied to the Land Use and Cover Area frame Survey (LUCAS) dataset to develop a hyperspectral soil Cr content prediction model with good generalizability and accuracy. The optimal DNN model was constructed by optimizing the spectral preprocessing methods and DNN hyperparameters, which achieved good predictive performance for Cr detection, with a correlation coefficient value of 0.79 on the testing set. Four important hyperspectral bands with strong Cr sensitivity (400-439, 1364-1422, 1862-1934, and 2158-2499 nm) were identified by permutation importance and local interpretable model-agnostic explanations. Soil iron oxide and clay mineral content were found to be important factors influencing soil Cr content. The findings of this study provide a feasible method for rapidly determining soil Cr content from hyperspectral data, which can be further refined and applied to large-scale Cr detection in the future.

Assessment of health risks from potassium bromate and trace metals in bread consumption in Ado Ekiti, Southwest, Nigeria

IntroductionBread, a staple food consumed by a large portion of the population worldwide, including Nigeria, has emerged as one of the most popular quick meal options. The excessive intake of potassium bromate and trace metals in bread has been identified as detrimental to human health due to its heightened propensity to induce cancer in human. ObjectiveThe current study assessed the exposure to potassium bromate (KBrO3) and trace metals through bread consumption, as well as the associated risks to dietary habits among Ado Ekiti, Southwest Nigeria residents. Bread varieties commonly consumed in Ado Ekiti were randomly chosen from local bakeries. These bread samples were then analyzed in the laboratory using an Atomic Absorption Spectrophotometer to determine the levels of trace metals, including lead (Pb), manganese (Mn), nickel (Ni), chromium (Cr), zinc (Zn), cadmium (Cd), and cobalt (Co), as well as potassium bromate concentrations. ResultsThe findings revealed that cobalt (Co) had the highest mean concentration (29.35±3.59 mg.kg−1), whereas lead (Pb) exhibited the lowest mean concentration (0.06±0.02 mg.kg−1). The sequence of trace metal levels was Co > Cd > Zn > Ni > Mn > Cr > Pb. All trace metal concentrations exceeded the standards set by FAO/WHO. Regarding potassium bromate content, it ranged from 0.01 mg.kg−1 to 0.06 mg.kg−1, surpassing the maximum permissible limits of 0.02 mg.kg−1 set by the Food and Drug Administration.Although the chronic hazard quotient among adults and children was low, the hazard ratio ranged from 11 to 9 among adults and from 14 to 9 among children, suggesting the potential for carcinogenic effects with repeated consumption. Based on the hazard ratios, the estimated chances of developing cancer from daily consumption of bread samples were approximately 14 in 1,000,000, 86 in 1,000,000, 71 in 1,000,000, and 40 in 1,000,000, respectively, for the adult population, and about 20 in 1,000,000, 11 in 1,000,000, 90 in 1,000,000, and 56 in 1,000,000 for the children population. ConclusionThe study showed that trace metals Pb, Mn, Ni, Cr, Zn, Cd and Co concentrations were higher than the FAO/WHO permissible limits. The concentration of potassium bromate in all the sorted bread samples exceeded the maximum acceptable limits except one. Though chronic hazard quotient among adults and children was low, the hazard ratio among the adult and children population was high, signifying possible cancer risks when continually consumed. These findings underscore the importance of stringent oversight by Nigerian regulatory authorities over using potassium bromate as an ingredient in bakeries.

Spatial variability and source analysis of soil heavy metals: A case study of the key planting area of special agricultural products in Cangxi County, China.

Heavy metal pollution in farmland soil represents a considerable risk to ecosystems and human health, constituting a global concern. Focusing on a key area for the cultivation of special agricultural products in Cangxi County, we collected 228 surface soil samples. We analyzed the concentration, spatial distribution, and pollution levels of six heavy metals (Cr, Cu, Pb, Ni, Zn, and Hg) in the soil. Moreover, we investigated the sources and contribution rates of these heavy metals using Principal Component Analysis/Absolute Principal Component Scores (PCA/APCS) and Positive Matrix Factorization (PMF) models. Our findings indicate that none of the six metals exceeded the pollution thresholds for farmland soils. However, the mean concentrations of Cr and Ni surpassed the background levels of Sichuan Province. A moderate spatial correlation existed between Pb and Ni, attributable to both natural and anthropogenic factors, whereas Zn, Cu, Hg, and Cr displayed a strong spatial correlation, mainly due to natural factors. The spatial patterns of Cr, Cu, Zn, Pb, and Ni were similar, with higher concentrations in the northern and eastern regions and lower concentrations centrally. Hg's spatial distribution differed, exhibiting a broader range of lower values. The single pollution index evaluation showed that Cr and Ni were low pollution, and the other elements were no pollution. The average value of comprehensive pollution index is 0.994, and the degree of pollution is close to light pollution. Predominantly, higher pollution levels in the northern and eastern regions, lower around reservoirs. The PCA/APCS model identified two main pollution sources: agricultural traffic mixed source (65.2%) and natural parent source (17.2%). The PMF model delineated three sources: agricultural activities (32.59%), transportation (30.64%), and natural parent sources (36.77%). Comparatively, the PMF model proved more accurate and reliable, yielding findings more aligned with the study area's actual conditions.

A New Modified Carbon Paste Electrode for Selective Determination of Chromium(III) in Pharmaceutical Drugs and Food Samples

Background and Objective: This study presents a novel potentiometric method for the precise, accurate, selective, and rapid determination of Cr(III) ion concentration in different samples. Methods: A new ionophore, namely macrocyclic tetramide ionophore (MCTA), was synthesized through an inexpensive and straightforward approach, yielding a high-quality product. The (MCTA) ionophore was utilized as the active center in the preparation of modified carbon paste electrodes (MCPEs) to quantify the Cr(III) ion. The paste was made by adding graphite, MCTA, and plasticizer and mixing them in varying weight percent ratios. Results: The proposed electrodes, I and II, exhibited a trivalent Nernstian response of 20.029 ±0.57 and 20.3±0.56 mV decade-1 , respectively, with linearity of 1.0x10-7 – 1.0x10-2 and 1.0x10-5 – 1.0x10- 2 mol L-1 . Electrodes I and II were examined for their pH, response time, and thermal stability. In comparison to other mono-, bi-, and trivalent cations, starch, and sugars, the electrodes demonstrated a high degree of selectivity for Cr(III). The modified electrodes were used to determine the concentration of Cr(III) in various real samples, including drug tablets, juice extractions, and tap water, with acceptable recovery values. Conclusion: The results were compared with those obtained using the previously reported method, with no significant difference observed between them, as indicated by the F and t-test values. The data showed good accuracy and precision, as well as a high percentage of recovery. The adsorption capacity of the MCTA ionophore towards Cr(III) ions was also examined.

Nickel-cobalt-chromium ternary transition metal hydroxide for supercapacitors

Metal hydroxide is a promising electrode material for supercapacitors. And third metal introduction can improve its electrochemical performance. In this paper, the Cr was introducing into NiCo-LDH by one-step hydrothermal method. In addition, the influence of Cr content on the electrochemical performance was investigated. The results show that maximum specific capacitance of 2712 F g−1 with the ratio of Ni: Co: Cr of 1:1:0.05, higher than pure NiCo-LDH of 1676 F g−1. In addition, the assembled NiCoCr-0.05//YP50 supercapacitor devices can reach an energy density of 27.38 Wh kg−1 with a good cycle life.

Concentrations of Bioelements (Zn, Cu, Fe, Cr, Mg, Mn) in Serum and Bone Tissue of Aging Men Undergoing Hip Arthroplasty: Implications for Erectile Dysfunction.

Background: Erectile dysfunction (ED) stands out as one of the most prevalent sexual disorders in men, with its incidence progressively escalating with age. As delineated by the International Consultation Committee for Sexual Medicine on Definitions/Epidemiology/Risk Factors for Sexual Dysfunction, the prevalence of ED among men under 40 years is estimated to be within the range of 1-10%. The aim of this study was to determine the relationship between the concentration of bioelements (Zn, Cu, Fe, Cr, Mg, and Mn) in the serum and bone tissue and the concentration of selected hormones in men with and without erectile dysfunction. Materials and methods: The retrospective cohort study included 152 men who underwent total hip arthroplasty for hip osteoarthritis at the Department of Orthopaedic Traumatology and Musculoskeletal Oncology at the Pomeranian Medical University in Szczecin. Certain exclusion criteria were applied to ensure the integrity of the study. These included individuals with diabetes, a history of cancer, alcohol abuse, liver or kidney failure, New York Heart Association (NYHA) class III or IV heart failure, and those taking medications that affect bone metabolism, such as mineral supplements, neuroleptics, chemotherapeutic agents, immunosuppressants, corticosteroids, or antidepressants. Patients with hypogonadism or infertility were excluded from the study. Results: The study showed an association between bioT concentrations and Cu concentrations in both patients with and without erectile dysfunction. A correlation between bioactive testosterone and Cr concentrations was also observed in both groups. Patients with erectile dysfunction showed a relationship between bioT concentration and Zn concentration, TT concentration and Mn concentration, FT concentration and Zn concentration, and E2 concentration and Cr concentration. An analysis of elemental concentrations in bone tissue showed an association between FT and Mg and Mn concentrations, but only in patients with erectile dysfunction. In patients without erectile dysfunction, a correlation was observed between FT and Cu concentrations. A correlation was also observed between bioT concentrations and Mg, Mn, and Zn concentrations, but only in patients with erectile dysfunction. In patients without erectile dysfunction, a correlation was observed between bioT and Cu concentrations. Conclusions: Studying the relationship between the concentration of bioelements (Zn, Cu, Fe, Cr, Mg, and Mn) in the serum and bone tissue and the concentration of selected hormones in men may be important in explaining the etiology of the problem. The study of the concentration of Zn and Cu in bone tissue and serum showed that these two elements, regardless of the place of accumulation, may be related to the concentration of androgens in men.

Si,N co-doped carbon quantum dots in mesoporous molecular sieves: A fluorescence sensing platform for Cr(VI) detection

Carbon quantum dots (CQDs) are highly efficient fluorescent probes for metal ion detection; however, they are limited by non-uniform particle size, aggregation, and the inability to facilitate quantitative analysis. Herein, a smart host–guest strategy is utilized, wherein CQDs are immobilized in mesoporous molecular sieves, proving to be an effective method to minimize these drawbacks. Si,N-CQDs@SBA-15 is successfully synthesized by the one-step hydrothermal route using Si,N-CQDs precursor materials as guests and the mesoporous molecular sieve SBA-15 as the host. A good linear relationship between the concentration of Cr(VI) ions and fluorescent intensity is observed from 0 μM to 100 μM (R2 = 0.9986). Thelimitofdetection(LOD) is 0.213 μM, approximately three times lower than that of pristine Si,N-CQDs (0.677 μM). Additionally, Si,N-CQDs@SBA-15 exhibit good detection selectivity for Cr(VI) detection over other metal ions. Moreover, a smartphone-based laboratory device and RGB analysis app are employed to capture and analyze fluorescence images, revealing a LOD for Cr(VI) of 0.201 μM. Förster Resonance Energy Transfer (FRET) is identified as the possible mechanism for the fluorescence quenching of Si,N-CQDs@SBA-15 by Cr(VI) through UV–vis and fluorescence experiments. The practicability of the synthesized fluorescent probes is further validated in river water, yielding satisfactory spiked recoveries ranging from 99.24 % to 106.21 %.

Evaluation of heavy metal concentration in black tea and coffee marketed in Erbil, Iraq: a consumer health risk assessment

ABSTRACT Black tea and coffee are popular and widely consumed beverages worldwide. However, the potential accumulation of heavy metals in food products raises concerns regarding their toxicity. In this study, we investigated the concentrations of arsenic (As), cadmium (Cd), copper (Cu), chromium (Cr), lead (Pb), manganese (Mn), zinc (Zn), and iron (Fe) in 102 samples of black tea and coffee purchased from Erbil city market in Iraq. Additionally, we determined the Hazard Quotient (HQ) and Hazard Index (HI) levels of heavy metal intake to evaluate the non-carcinogenic health risks for adult consumers. The mean concentrations of As, Cd, Cu, Cr, Pb, Mn, Zn, and Fe in black tea and coffee were found to be 0.023, 0.11, 10.29, 0.60, 1.69, 294.99, 25.59, and 39.80 mg/kg, respectively. In the case of black tea, the highest mean concentration observed was 607.28 mg/kg for Mn, while the lowest was 0.035 mg/kg for Cd in coffee. Arsenic was below the detection limit in coffee. Our results revealed that, except for Cd content in some tea samples, the concentrations of the studied metals were within the standard levels. The HQ and HI values for all elements were found to be less than one, indicating no adverse health effects associated with consuming these beverages. However, continuous monitoring is essential to ensure the ongoing safety of black tea and coffee.

Identification of spatial clusters of potentially toxic elements in different soil types using unsupervised machine learning and compositional data analysis

Soil health is important, with soil chemical composition data, including potentially toxic elements (PTEs) being one of its conceptual components. This study aims to reveal the spatial distribution patterns of soil PTEs contents, identify their potential sources, and unveil their geochemical associations in Aragatsotn region, Armenia. For that purpose, the contents of Cr, V, Ti, As, Zn, Cu, Co, Fe, Mn, Ba, and Pb were determined using an X-ray fluorescence spectrometer. The mean contents of Cr and As exceeded their upper continental crust by 1.5 and 3.1 times and their maximum acceptable values by 1.5 and 1.5 times. The analysis demonstrated the presence of sites where all these elements displayed comparatively higher values. The combined application of compositional data analysis and geospatial mapping revealed multivariate outliers, which were located in structural-metallogenic zones with active ore exploitation . The application of unsupervised machine learning algorithm unveiled three groups within the main dataset and the clr-biplot identified the source-specific elements. Particularly, Group I included Cu and displayed the highest mean value among the identified groups. The soil samples included in Group I were in areas where Calcisols were developed and comparatively high Cu contents were attributed to agricultural activities and vehicle emissions. Group II is represented by the geochemical association of Fe, Co, Cr, Mn, Zn, and As. The formation of this group is conditioned by volcanic rocks of the local geological origin. However, no spatial pattern was identified in Group II distribution aligned with soil types. Group III included Ti, V, Pb, and Ba, which may have a mixed origin as it is spatially distributed in areas where regional highways pass through and where Group II elements also exhibit their higher values.

Effect of Cr content on microstructure, mechanical, and corrosion properties of CoCrxFeMnNi high-entropy alloys fabricated by selective laser melting

The method of using mixed powder for SLM in-situ alloying to prepare high entropy alloys has been verified to be feasible. In this investigation, the effect of Cr addition on microstructure uniformity, mechanical properties, and corrosion resistance of CoCrxFeMnNi High-entropy alloy (with x = 0.4, 0.7, 1.0, 1.3 at. %) prepared by the SLM in-situ alloying technique has been thoroughly investigated. X-ray diffraction and scanning electron microscopy suggest that all CoCrxFeMnNi HEAs samples are composed of a FCC matrix and little residual Cr particles, and all elements of the FCC matrix are evenly distributed, accompanied by a very small amount of Mn evaporation. Electrochemical corrosion tests have shown that with an increase in Cr content, the corrosion resistance of the alloy is significantly improved. The CoCr1.3FeMnNi HEAs possess the best corrosion resistance against the attack of the Cl ion, with a corrosion rate 0.671 × 10−3 mm / year. Furthermore, the Cr element can significantly improve the microhardness, tensile strength, and plasticity of CoCrxFeMnNi HEAs. The CoCr1.3FeMnNi HEAs possess the best mechanical properties, with microhardness 217.8 HV0.5, tensile strength 691 MPa and elongation rate 18.9%, respectively.

Cellular absorption and cytotoxic mitigation of heavy metals in mining vegetables in southwest China: Mechanistic insights and health implications

The existing health risk assessment models often rely on total concentrations of contaminants, neglecting cellular absorption, leading to an overestimation of risks due to a lack of toxicological verification. In this study, the content, bioaccessibility, and health risk evaluation of Cr, Ni, Cu, and As in vegetables from mining areas in Southwest China were examined. The cytotoxicity and gastric absorption of heavy metals and underlying mechanisms as well as the toxic mitigation approach after consumption of risky vegetables were explored. Our results showed that the heavy metals in cabbage, celery, and garlic seedlings were within the safety limit, even though grown in contaminated soils. The bioaccessibility of As, Cu, Ni, and Cr in vegetables in the gastric phase is from 6.92% to 81.15%, with mint having the highest bioaccessible concentrations of Cr (32.7 μg/kg), Cu (540.1 μg/kg), and As (103.9 μg/kg). The Hazard Quotient and Hazard Index values of the bioaccessible metals suggested an unacceptable cancer risk. Besides, the vegetable extracts increased cell apoptosis and tight junction disruption. Unexpectedly, the high-risk mint extract with the greatest bioaccessibility didn't cause cytotoxicity but inhibited cell apoptosis and enhanced cellular tight junction, evidenced by the upregulation of Zonula Occludens-1, Occludin, and Claudin 3, and a decrease in cellular heavy metal uptake. Furthermore, the mint extract could alleviate garlic seedling extract-induced cytotoxicity, indicating that the special substance in mint has protective effects. Taken together, special components in vegetables, cellular uptake, and toxicity of heavy metals should be considered in the accurate assessment of health risks.

Stabilization and Release Characteristics of Heavy Metals in Desulfurization Sludge from Coal-Fired Power Plants

ABSTRACT The leaching risk of heavy metals from flue gas desulfurization (FGD) by-product sludge of coal-fired power plants is high, and there is an urgent need for effective treatment using solidification. In this paper, dithiocarbonates (DTC), 2,4,6-tri-mercapto-S-triazine trisodium salt (TMT-15) curing agent, fly ash and cement were used to cure the desulfurization sludge and study the environmental release characteristics of heavy metals before and after curing. The results show that all four curing agents had a good curing effect. The best chelating agent was DTC, and the best curing conditions were achieved at a liquid-to-solid ratio of 3:1 and a mass fraction of 8%. The leaching concentrations of As, Pb, Cd, Cr, Ni, Cu, Zn, and Hg were reduced by 87.95%, 100%, 85.29%, 86.17%, 70.11%, 95.06%, 90.28%, and 98.44%, respectively, after curing. In the environmental release characteristics test, the leaching concentrations of heavy metals in the cured sludge were lower than those of the original samples at different pH values and temperatures, indicating better stability. The mass fraction had the greatest effect on the leaching concentration of heavy metals, followed by the pH value and temperature.

Screening for Antibiotic Resistance Genes in Bacteria and the Presence of Heavy Metals in the Upstream and Downstream Areas of the Wadi Hanifah Valley in Riyadh, Saudi Arabia.

Valley surface water is considered a focal public health concern owing to the presence of multi-drug-resistant bacteria. The distribution of antimicrobial resistance (AMR) bacteria in the surface water is affected by the presence of multiple factors, including antibiotics coming from wastewater discharge or other contaminant sources such as pharmaceuticals, biocides, and heavy metals. Furthermore, there is evidence suggesting that high levels of antibiotic resistance genes (ARGs) can be transferred within bacterial communities under the influence of heavy metal stress. Hence, the primary aim of this study is to investigate the presence of heavy metals and bacterial ARGs in upstream as well as downstream locations of Wadi Hanifah Valley in Riyadh, Saudi Arabia. Sample collection was conducted at eighteen surface water sites within the valley in total. The selection of ARGs was associated with the most common antibiotics, including β-lactam, tetracycline, erythromycin, gentamicin, sulphonamide, chloramphenicol, vancomycin, trimethoprim, and colistin antibiotics, which were detected qualitatively using polymerase chain reaction (PCR) technology. The tested antibiotic resistance genes (ARGs) included (blaNDM-1 (for the antibiotic class Beta-lactamases), mecA (methicillin-resistant Staphylococcus aureus), tet(M) and tet(B) (for the antibiotic class Tetracycline), ampC (for the antibiotic class Beta-lactamases), vanA (for the antibiotic class vancomycin), mcr-1 (for the antibiotic class colistin), erm(B) (for the antibiotic class erythromycin), aac6'-Ie-aph2-Ia (for the antibiotic class Gentamicin), sulII (for the antibiotic class sulphonamide), catII (for the antibiotic class Chlorophincol), and dfrA1 (for the antibiotic class trimethoprim). Moreover, an assessment of the levels of heavy metals such as lithium (Li), beryllium (Be), chromium (Cr), cobalt (Co), arsenic (As), cadmium (Cd), tin (Sn), mercury (Hg), and lead (Pb) was conducted by using inductively coupled plasma mass spectrometry (ICPMS). According to our findings, the concentrations of sulphonamide, erythromycin, and chloramphenicol ARGs (erm(B), sulII, and catII) were observed to be the most elevated. Conversely, two ARGs, namely mecA and mcr-1, were not detected in the samples. Moreover, our data illustrated a significant rise in ARGs in the bacteria of water samples from the upstream sites as compared with the water samples from the downstream sites of Wadi Hanifah Valley. The mean concentration of Li, Be, Cr, Co, As, Cd, Sn, Hg, and Pb in the water samples was estimated to be 37.25 µg/L, 0.02 µg/L, 0.56 µg/L,0.32 µg/L, 0.93 µg/L, 0.01 µg/L, 200.4 µg/L, 0.027 µg/L, and 0.26 µg/L, respectively, for the selected 18 sites. Furthermore, it was revealed that the concentrations of the screened heavy metals in the water samples collected from various sites did not surpass the maximum limits set by the World Health Organization (WHO). In conclusion, this study offers a concise overview of the presence of heavy metals and ARGs in water samples obtained from the Wadi Hanifah Valley in Riyadh, KSA. Such findings will contribute to the ongoing monitoring and future risk assessment of ARGs spread in surface water.

Selective metasomatism of ultramafic cumulates within Archean supracrustal sequences

The Neoarchean Storø Supracrustal Belt in SW Greenland comprises a sequence of mature quartzite, metapelite, amphibolite, and ultramafic rocks that underwent amphibolite facies metamorphism during the amalgamation of the Mesoarchean Akia Terrane and the Eoarchean Færingehavn Terrane. In this belt, tourmaline is found in a transition zone between ultramafic and metapelitic rocks, but also occurs as orbicules within the ultramafic rocks. These tourmaline orbicules hosted by ultramafic rocks are reported for the first time in the North Atlantic craton, thus indicating a unique formation mechanism. We conducted a comprehensive examination of the petrology, whole-rock and mineral chemistry, and oxygen isotope compositions from borehole samples in the Storø Supracrustal Belt, to elucidate the metasomatic events associated with the formation of the orbicular tourmalines. The Storø ultramafic rocks have high MgO, Cr, and Ni contents, with low abundances of REE and HFSE, and preserve a typical cumulate texture. These features are similar to those of ultramafic cumulates found in other Archean supracrustal belts, suggesting a cumulate origin for the Storø ultramafic rocks. Furthermore, the morphology and composition of the tourmaline orbicules within these cumulates indicate that they originated from melts with high boron and high water concentrations that infiltrated the ultramafic rocks. The main factor influencing the morphology of the tourmaline orbicules is the silicification of the ultramafic rocks, driven by their lower chemical potential of SiO2 compared to the surrounding rocks. This silicification process, in combination with compositional variations of cumulates during fractional crystallization, has contributed to the geochemical diversity observed in Archean ultramafic rocks. Thus, it is crucial to understand the effects of such selective metasomatism on Archean ultramafic rocks, as this will facilitate the extraction of original information preserved in the early rock record.

An innovative ionic liquid-aqueous biphasic system for simultaneously highly efficient dechroming and collagen recovery from chrome-tanned leather shavings at room temperature

Chrome-tanned leather shavings (CTLS) with abundant collagen of 70–90 wt% but high Cr content of 2–4 wt% are considered as hazardous wastes. Due to the stable covalent bond between Cr and collagen, current processes for collagen recovery from CTLS face challenges including low dechroming efficiency, collagen disruption, high energy and chemical consumption and secondary pollution. In this paper, an innovative IL-targeted homogeneous isolation (IL-THI) process based on the reusable ionic liquid-aqueous biphasic system (IL-ABS) was established for the simultaneous resource recovery and complete dechroming of CTLS at room temperature, with the recovery rate of collagen reached 72.4 % while Cr content in collagen is reduced from 35.65 × 103 mg/kg to 1.78 mg/kg. This IL-ABS enriched TBAH in the upper phase and potassium tartrate in the lower phase. Moreover, TBAH demonstrated excellent reproducibility across five cycles, achieving consistently low Cr content of 2.65 mg/kg in collagen, far below the 50 mg/kg limit in national standards. The triple helix conformation and the molecular weight of the collagen product were confirmed via Fourier-transform infrared spectroscopy, X-ray diffraction analyses, circular dichroism spectra analysis and SDS-PAGE. Moreover, economic calculations demonstrated the suitability of this novel process for sustainable CTLS recovery. The superior dechroming ability of IL-ABS is attributed to the formation of Cr(III)-Tartrate complexes, which preferentially migrate to the lower phase due to the solvophobic effect, while dissolved collagen is recovered from the upper phase, as disclosed by UV–Vis spectra, ICP-OES, and all-atom molecular dynamics simulations. Additionally, IL-THI process demonstrates considerable potential for the isolation of Cr(III) and collagen in solid waste, with low energy consumption, improved separation efficiency, and increased design flexibility.

Influencing Factors, Risk Assessment, and Source Identification of Heavy Metals in Purple Soil in the Eastern Region of Guang’an City, Sichuan Province, China

Soil heavy metal contamination poses a significant threat to both environmental health and ecological safety. To investigate the influencing factors, ecological hazards, and sources analysis of heavy metals in purple soil, 27 sets of soil samples were collected from varying genetic horizons within Guang’an City, and the contents of As, Cd, Cu, Cr, Hg, Ni, Pb, and Zn were analyzed. The results indicated higher concentrations of heavy metals in soil A horizon, compared to that of C horizon. The relevance analysis indicated that the soil’s heavy metals were strongly correlated with the soil’s physicochemical properties. The enrichment factor, pollution load index, and potential risk index highlighted slightly to severely polluted levels of soil Cd and Hg, which significantly contribute to the ecological hazards posed by soil heavy metals. The potential source of heavy metals analyzed using the APCS-MLR model identified both anthropogenic inputs and natural sources as primary contributors to heavy metal presence in soils. The Cu, Cr, Ni, Pb, and Zn contents in the samples from different genetic horizons were chiefly influenced by natural sources, such as soil matrix erosion and weathering, while the concentrations of Cd and Hg were largely affected by anthropogenic activities, specifically coal combustion and agriculture. Conversely, the As content was found to be influenced by a combination of both factors. Anthropogenic activities greatly impacted soil heavy metals at various depths within the study area, thereby underscoring the importance of monitoring these heavy metals. The findings gained from this research can give a scientific basis for the potential utilization of purple soil.

Characterization of heavy metal contamination in wetland sediments of Bosten lake and evaluation of potential ecological risk, China

In November 2023, twenty-two sediment samples were collected from the Bosten Lake wetland in Xinjiang to determine the concentrations of eight heavy metals: arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb), and zinc (Zn). This data was used to assess heavy metal contamination and potential ecological risks in the sediments using the Pollution Load Index (PLI) and the Potential Ecological Risk Index (RI). Additionally, multivariate statistical analysis and Positive Matrix Factorization (PMF) were employed to elucidate potential sources and their contributions to contamination. The following are the main conclusions: (1) average concentrations of Zn, Cd, Cr, Pb, and Hg in the sediments surpassed Xinjiang soil background levels by factors of 1.01, 3.58, 1.32, 1.94, and 1.53, respectively. (2) Sediments demonstrated severe pollution with Cd, slight pollution with Zn, Cr, Pb, and Hg, while Cu and Ni indicated mild pollution and As showed non-polluted levels. The overall PLI average (1.01) suggested slight contamination. (3) The descending order of average single ecological risk values were Cd, Hg, Pb, Cu, Ni, Cr, As, and Zn, with a comprehensive RI averaging at 184.07, signaling a moderate ecological risk. (4) Source apportionment revealed that Zn, Cu, Pb, and Ni were influenced by transportation and household waste emissions, while Cr and As were dictated by natural background levels. Hg predominately originated from fossil fuel combustion and Cd from agricultural activities. (5) Mixed sources accounted for the following percentage contributions to sediment heavy metal content: transportation and domestic waste (30.41%), natural background (25.88%), fossil fuel combustion (22.40%), and agricultural activities (21.31%). With anthropogenic inputs exceeding those of natural origins, it is imperative to prioritize the management of Cd, Hg, and Pb as primary pollutants within the region.