Coupling Of Solid-phase Microextraction Research Articles

Perspective on SPME-MS: Green and high-performance methods for rapid screening

The direct coupling of solid-phase microextraction (SPME) with mass spectrometry (MS) offers rapid analysis with high sensitivity and low matrix effects by benefiting from the integration of sampling, high enrichment, and clean-up functions of SPME. Eliminating chromatographic separation reduces the amount of gas/solvent needed for analysis, while direct desorption in SPME-MS consumes none or few microliters of organic solvents per sample, further enhancing the greenness of the SPME technology. Over the past two decades, the rapid evolution of SPME-MS has given rise to numerous novel technologies that employ diverse ionization techniques and interfaces, several of which have already been commercialized. Drawing from an extensive review published earlier this year and our research experience, we provide perspectives on three aspects of these technologies: interface design and automation, integration with state-of-art MS instrumentation, and anticipated future developments.

Coupling of Solid-Phase Microextraction Directly to Mass Spectrometry via an Improved Microfluidic Open Interface to Facilitate High-Throughput Determinations.

Mass spectrometry analysis can be performed by introducing samples directly to mass spectrometry, allowing the increase of the analysis throughput; however, some disadvantages of direct-to-mass spectrometry analysis include susceptibility to matrix effects and risk of instrument contamination from inadequate sample preparation. Solid-phase microextraction is one of the most suitable sample preparation methods for direct-to-mass spectrometry analysis, as it offers matrix-compatible coatings which ensure analyte enrichment with minimal or no interference from matrix. One of the ways solid-phase microextraction can be coupled directly to mass spectrometry is via a microfluidic open interface. This manuscript reports improvements made to the initial microfluidic open interface design, where the system components have been simplified to mostly commercially available materials. In addition, the analysis of samples has been automated by implementing software that fully controls the analysis workflow, where the washing procedure is optimized to completely reduce the carryover. Herein, the extraction and desorption time profiles from thin and thick SPME devices was studied where the overall workflow consisted of high-throughput sample preparation of 1.3 min per 96 samples and <1 min per sample instrumental analysis.

Surface-Coated Acupuncture Needles as Solid-Phase Microextraction Probes for In Vivo Analysis of Bioactive Molecules in Living Plants by Mass Spectrometry.

In this work, we report the coupling of solid-phase microextraction (SPME) enabled by surface-coated acupuncture needles with nano-electrospray mass spectrometry (nanoESI-MS) for the analysis of bioactive molecules in living plants. The needle tip was oxidized by a mixture of nitric acid and hydrogen peroxide solution and then subject to surface coating via carbonization of paraffin. A combination of oxidation and surface coating resulted in a thin coating of carbon film, whereby the significantly increased surface area promoted both analyte enrichment and ionization for MS analysis. The analytical performances were evaluated through the characterization of small molecules, peptides and proteins. Compared with conventional nanoESI, our new strategy of employing surface-coated needles had a high salt tolerance. The streamlined experimental workflow could be completed within one minute. The linear dynamic ranges for L-histidine and L-lysine, as two representatives, were over two orders of magnitude with a limit of detection (LOD) of 3.0~5.0 ng/mL. A mark is made on the needle at 2 mm from the tip, the needle is then kept in the sample for 30 s. In vivo sampling and identification of α-tomatine and organic acids from the stem of a living tomato plant were demonstrated as a practical application, while the physiological activities of the plant were not disrupted due to the minimally invasive sampling. We anticipate that the developed strategy may be of potential use for real-time clinical and other on-site analyses.

Rapid screening of polybrominated diphenyl ethers in water by solid-phase microextraction coupled with ultrahigh-resolution mass spectrometry.

Polybrominated diphenyl ethers (PBDEs) are considered emerging organic contaminants that attract more attention in the environment. Herein, online coupling of solid-phase microextraction and ultrahigh-resolution mass spectrometry was developed for rapid screening of eight PBDEs in water samples. This procedure was completed in 22min, about 6 times faster than the routine workflow such as solid-phase extraction coupled with gas chromatography-mass spectrometry. Thermal desorption and solvent-assisted atmospheric pressure chemical ionization were developed for the effective coupling of solid-phase microextraction (SPME) with ultrahigh-resolution mass spectrometry (UHRMS), which contributed to the signal enhancement and made the methodology feasible for environmental screening. The limits of detection and quantification were 0.01-0.50ng/mL and 0.05-4.00ng/mL, respectively. The recoveries were 57.2-75.2% for quality control samples at spiking levels of 0.8-10ng/mL (4-50ng/mL for BDE209), with relative standard deviation less than 19.0%. Twelve water samples from different river sites near industrial areas were screened using the developed method. The results showed that BDE-209 was the dominant PBDE (1.02-1.28ng/mL in positive samples), but its amount was lower than the human health ambient water quality criteria. Consequently, the developed method provides a rapid and reliable way of evaluating contamination status and risks of PBDEs in aqueous environment.

Comparison of different approaches for direct coupling of solid-phase microextraction to mass spectrometry for drugs of abuse analysis in plasma

The direct coupling of solid-phase microextraction (SPME) to mass spectrometry (MS) (SPME-MS) has proven to be an effective method for the fast screening and quantitative analysis of compounds in complex matrices such as blood and plasma. In recent years, our lab has developed three novel SPME-MS techniques: SPME-microfluidic open interface-MS (SPME-MOI-MS), coated blade spray-MS (CBS-MS), and SPME-probe electrospray ionization-MS (SPME-PESI-MS). The fast and high-throughput nature of these SPME-MS technologies makes them attractive options for point-of-care analysis and anti-doping testing. However, all these three techniques utilize different SPME geometries and were tested with different MS instruments. Lack of comparative data makes it difficult to determine which of these methodologies is the best option for any given application. This work fills this gap by making a comprehensive comparison of these three technologies with different SPME devices including SPME fibers, CBS blades, and SPME-PESI probes and SPME-liquid chromatography-MS (SPME-LC-MS) for the analysis of drugs of abuse using the same MS instrument. Furthermore, for the first time, we developed different desorption chambers for MOI-MS for coupling with SPME fibers, CBS blades, and SPME-PESI probes, thus illustrating the universality of this approach. In total, eight analytical methods were developed, with the experimental data showing that all the SPME-based methods provided good analytical performance with R2 of linearities larger than 0.9925, accuracies between 81% and 118%, and good precision with an RSD% ≤ 13%.

Enhanced microfluidic open interface for the direct coupling of solid phase microextraction with liquid electron ionization-tandem mass spectrometry

Solid-phase microextraction (SPME) directly coupled to MS is a widespread technique for determining small molecules in different matrices in many application fields. Here we present a modified microfluidic open interface (MOI) connected to a passive-flow-splitter device (PFS) for the direct coupling of SPME to a liquid-electron ionization (LEI) interface in a tandem mass spectrometer for the analysis of complex biological samples. No chromatographic separation is involved. The new MOI-PFS configuration was designed to speed up the sample transfer to MS, improving the signal-to-noise ratio and peak shape and leading to fast and sensitive results. MOI-PFS-LEI-MS/MS experiments were conducted using fentanyl as a model compound in water and blood serum. The method uses a C18 Bio-SPME fiber by direct immersion (3 min) in 300 µL of the sample followed by rapid desorption (1 min) in a flow isolated volume (MOI chamber, 2.5 µL) filled with 100% acetonitrile. The PFS permits the rapid transfer of a fraction of the sample into the MS via the LEI interface. The optimal conditions were obtained at a flow rate of 10 µL·min−1 and a 1:20 split ratio. Altogether, extraction, desorption, and analysis require approximately 5 min. Good interday and intraday precision, excellent linearity and LOQs in the µg·L−1 range were obtained for fentanyl in water and serum. Greenness evaluation demonstrated a limited environmental impact of this technique.

Online In-Tube Solid-Phase Microextraction Coupled with Liquid Chromatography-Tandem Mass Spectrometry for Automated Analysis of Four Sulfated Steroid Metabolites in Saliva Samples.

Accurate measurement of sulfated steroid metabolite concentrations can not only enable the elucidation of the mechanisms regulating steroid metabolism, but also lead to the diagnosis of various related diseases. The present study describes a simple and sensitive method for the simultaneous determination of four sulfated steroid metabolites in saliva, pregnenolone sulfate (PREGS), dehydroepiandrosterone sulfate (DHEAS), cortisol sulfate (CRTS), and 17β-estradiol-3-sulfate (E2S), by online coupling of in-tube solid-phase microextraction (IT-SPME) and stable isotope dilution liquid chromatography–tandem mass spectrometry (LC–MS/MS). These compounds were extracted and concentrated on Supel-Q PLOT capillary tubes by IT-SPME and separated and detected within 6 min by LC–MS/MS using an InertSustain swift C18 column and negative ion mode multiple reaction monitoring systems. These operations were fully automated by an online program. Calibration curves using their stable isotope-labeled internal standards showed good linearity in the range of 0.01–2 ng mL−1 for PREGS, DHEAS, and CRTS and of 0.05–10 ng mL−1 for E2S. The limits of detection (S/N = 3) of PREGS, DHEAS, CRTS, and E2S were 0.59, 0.30, 0.80, and 3.20 pg mL−1, respectively. Moreover, intraday and interday variations were lower than 11.1% (n = 5). The recoveries of these compounds from saliva samples were in the range of 86.6–112.9%. The developed method is highly sensitive and specific and can easily measure sulfated steroid metabolite concentrations in 50 μL saliva samples.

Rapid determination of tacrolimus and sirolimus in whole human blood by direct coupling of solid-phase microextraction to mass spectrometry via microfluidic open interface

Immunosuppressive drugs are administered to decrease immune system activity (e.g. of patients undergoing solid organ transplant). Concentrations of immunosuppressive drugs (ISDs) in circulating blood must be closely monitored during the period of immunosuppression therapy due to adverse effects that take place when concentration levels fall outside of the very narrow therapeutic concentration range of these drugs. This study presents the rapid determination of four relevant immunosuppressive drugs (tacrolimus, sirolimus, everolimus, and cyclosporine A) in whole human blood by directly coupling solid-phase microextraction to mass spectrometry via the microfluidic open interface (Bio-SPME-MOI-MS/MS). The BioSPME-MOI-MS/MS method offers ≤ 10% imprecision of in-house prepared quality controls over a 10-day period, ≤ 10% imprecision of ClinCal® Recipe calibrators over a three-day period, and single total turnaround time of ∼ 60 min (4.5 min for high throughput). The limits of quantification were determined to be 0.8 ng mL−1 for tacrolimus, 0.7 ng mL−1 sirolimus, 1.0 ng mL−1 for everolimus, and 0.8 ng mL−1 for cyclosporine. The limits of detection were determined to be 0.3 ng mL−1 for tacrolimus, 0.2 ng mL−1 for sirolimus, 0.3 ng mL−1 for everolimus, and 0.3 ng mL−1 for cyclosporine A. The R2 values for all analytes were above 0.9992 with linear dynamic range from 1.0 mL−1 to 50.0 ng mL−1 for tacrolimus, sirolimus, and everolimus while from 2.5 ng mL−1 to 500.0 ng mL−1 for cyclosporine A. To further evaluate the performance of the present method, 95 residual whole blood samples of tacrolimus and sirolimus from patients undergoing immunosuppression therapy were used to compare the Bio-SPME-MOI-MS/MS method against a clinically validated reference method based on chemiluminescent microparticle immunoassay, showing acceptable results. Our results demonstrated that Bio-SPME-MOI-MS/MS can be considered as a suitable alternative to existing methods for the determination of immunosuppressive drugs in whole blood providing faster analysis, better selectivity and sensitivity, and a wider dynamic range than current existing approaches.

Automated needle-sleeve based online hyphenation of solid-phase microextraction and liquid chromatography

A novel approach for the online coupling of solid-phase microextraction (SPME) and liquid chromatography (LC) is introduced. An innovative Si@GO@βCD coated needle-sleeve extractant device was developed and then employed in the automated online SPME-LC-UV determination of estrogen-like isoflavones from human urine samples. The extractant SPME device is easily attachable at the endpoint of an analytical syringe needle and operated by a lab-made autosampler. Fully automated online SPME-LC is accomplished by proper autosampler programming to perform the following steps: i) the analytes extraction by direct immersion of the extractant device into the stirred sample, ii) a rinsing step iii) the analytes desorption/enrichment, iv) the online transference of the extract to the LC injection valve. Besides allowing the online SPME hyphenation, this extraction modality efficiently addressed the drawbacks associated with the clogging and dispersion of graphene-based microextraction techniques performed in packed-bed and dispersive formats. The main extraction parameters and the performance of the automated online SPME-LC method developed were carefully studied. The results show a good sensitivity, reliability, and straightforward analytical strategy for the determination of organic compounds in complex samples. The detection limit of the method was 20 μg L1 for DAI and 10 μg L−1 for GEN, FOR and BIO. The intra-day RSD was below 10% and inter-day RSD was below 13%. The total analysis time was less than 17 min per sample.

Analysis of volatile compound change in tuna oil during storage using a laser irradiation based HS-SPME-GC/MS

Tuna oil (TO) is susceptible to oxidation thus induce unpleasant flavor during storage. Herein, a novel and efficient laser irradiation desorption headspace solid-phase microextraction coupling gas chromatography-mass spectrometry method was developed for fast analysis of flavor change in TO at different storage periods. The data were statistically analyzed by multivariate statistical analyses, including principle component analysis (PCA) and orthogonal partial least-square analysis (OPLS-DA), which showed superb classification accuracy and validation (R2(X) = 0.915, Q2 = 0.834) and was further verified by permutation test. The variation of volatile compounds in TOs along with the extension of storage time was statistically analyzed to be significant (p < 0.05). Nonanal, heptanal, 2-octanone, and hexadecanoic acid, ethyl ester were regarded as the dominant indicators with significant effect on the data matrix. The LID-HS-SPME GC/MS technique could be employed as a front-line fast detect method to ensure the lipid quality.

Solid phase microextraction as a powerful alternative for screening of secondary metabolites in actinomycetes.

Actinobacteria are one of the most promising producers of medically and industrially relevant secondary metabolites. However, screening of such compounds in actinobacteria growth demands simple, fast, and efficient extraction procedures that enable detection and precise quantification of biologically active compounds. In this regard, solid phase microextraction (SPME) emerges as an ideal extraction technique for screening of secondary metabolites in bacteria culture due to its non-exhaustive, minimally invasive, and non-destructive nature: its integrated sample preparation workflow; balanced coverage feature; metabolism quenching capabilities; and superior cleanup, as well as its versatility in configuration, which enables automation and high throughput applications. The current work provides a comparison of micro-scale and direct immersion SPME (DI-SPME) for screening of secondary metabolites, describes the optimization of the developed DI-SPME method, and introduces the developed technique for mapping of target secondary metabolites as well as its direct coupling to mass spectrometry for such applications. The optimized DI-SPME method provided higher amounts of extracted ions and intensity signals, yielding superior extraction and desorption efficiency as compared with micro-scale extraction. Studied compounds presented stability on the coating for 24 h at room temperature. The DI-SPME mapping approach revealed that lysolipin I and the lienomycin analog are distributed along the center and edges of the colony, respectively. Direct coupling of SPME to MS provided a similar ions profile as SPME-LC-MS while enabling a significant decrease in analysis time, demonstrating its suitability for such applications. DI-SPME is herein presented as an alternative to micro-scale extraction for screening of secondary metabolites in actinobacteria solid medium, as well as a feasible alternative to DESI-IMS for mapping of biologic radial distribution of secondary metabolites and cell life cycle studies. Lastly, the direct coupling of DI-SPME to MS is presented as a fast, powerful technique for high throughput analysis of secondary metabolites in this medium.

Direct coupling of solid phase microextraction with electrospray ionization mass spectrometry: A Case study for detection of ketamine in urine

Electrospray ionization mass spectrometry (ESI-MS) is a commonly used technique for analysis of various samples. Solid phase microextraction (SPME) is a simple and efficient technique that combines both sampling and sample preparation into one consolidated step, preconcentrating extracted analytes for ultra-sensitive analysis. Historically, SPME has been coupled with chromatography-based techniques for sample separation prior to analysis, however more recently, the chromatographic step has been omitted, with the SPME device directly coupled with the mass spectrometer. In this study, direct coupling of SPME with ESI-MS was developed, and extensively validated to quantitate ketamine from human urine, employing a practical experimental workflow and no extensive hardware modification to the equipment. Among the different fibers evaluated, SPME device coated with C18/benzenesulfonic acid particles was selected for the analysis due to its good selectivity and signal response. Different approaches, including desorption spray, dripping, desorption ESI and nano-ESI were attempted for elution and ionization of the analytes extracted using the SPME fibers. The results showed that the desorption spray and nano-ESI methods offered better signal response and signal duration than the others that were evaluated. The analytical performance of the SPME-nano-ESI-MS setup was excellent, including limit of detection (LOD) of 0.027 ng/mL, limit of quantitation (LOQ) of 0.1 ng/mL, linear range of 0.1–500.0 ng/mL (R2 = 0.9995) and recoveries of 90.8–109.4% with RSD 3.4–10.6% for three validation points at 4.0, 40.0 and 400.0 ng/mL, far better than the performance of conventional methods. The results herein presented, demonstrated that the direct coupling of SPME fibers with ESI-MS-based systems allowed for the simple and ultra-sensitive determination of analytes from raw samples such as human urine.

Applications of solid-phase micro-extraction with mass spectrometry in pesticide analysis.

Pesticides, widely applied in agriculture, can produce a variety of transformation products and their continuous use causes deleterious effects to ecosystem. Efficient and sensitive analytical techniques for enrichment and analysis of pesticides samples are highly required. Compared with other extraction methods, solid-phase micro extraction is a solvent free, cost effective, robust, versatile, and high throughput sample preparation technique, especially for the analysis of pesticides from complicated matrices. Coupling of solid-phase micro extraction with gas chromatography and mass spectrometry and liquid chromatography-mass spectrometry has been extensively applied in pesticide analysis. On the other hand, in recent years, combination of fast separation using solid-phase micro extraction and rapid detection using ambient mass spectrometry is providing highly efficient pesticide screening. This article summarizes the applications of solid-phase micro extraction coupled to mass spectrometry for pesticides analysis.

The capillary gap sampler, a new microfluidic platform for direct coupling of automated solid-phase microextraction with ESI-MS.

A new technology for rapid, automated coupling of solid-phase microextraction and mass spectrometry is introduced. Use of a so-called capillary gap sampler for automated solid-phase microextraction and direct delivery of the extracted analytes to a mass spectrometer provides certain advantages over existing technologies: coupling of the capillary gap sampler to a mass spectrometer offers quick, automated, and site-specific extraction from very low volume samples. High stability, reusability, and repeatability were achieved through systematic optimization. Diazepam, oxazepam, and nordiazepam were used as test compounds in all experiments. The ability of the sampler to extract benzodiazepines from human plasma (limit of detection 0.3 μg/mL) in the therapeutic range was confirmed. A linear dynamic range from 1 to 1000 ng/mL for all three analytes was found. The relative standard deviation of 20 extractions was between 11% and 17%, for oxazepam, nordiazepam, and diazepam, indicating acceptable repeatability of the method. Graphical Abstract Schematic of the desorption step inside the liquid bridge formed between two capillaries in thecapillary gap sampler.

Fast quantitation of opioid isomers in human plasma by differential mobility spectrometry/mass spectrometry via SPME/open-port probe sampling interface

Mass spectrometry (MS) based quantitative approaches typically require a thorough sample clean-up and a decent chromatographic step in order to achieve needed figures of merit. However, in most cases, such processes are not optimal for urgent assessments and high-throughput determinations. The direct coupling of solid phase microextraction (SPME) to MS has shown great potential to shorten the total sample analysis time of complex matrices, as well as to diminish potential matrix effects and instrument contamination. In this study, we demonstrate the use of the open-port probe (OPP) as a direct and robust sampling interface to couple biocompatible-SPME (Bio-SPME) fibres to MS for the rapid quantitation of opioid isomers (i.e. codeine and hydrocodone) in human plasma. In place of chromatography, a differential mobility spectrometry (DMS) device was implemented to provide the essential selectivity required to quantify these constitutional isomers. Taking advantage of the simplified sample preparation process based on Bio-SPME and the fast separation with DMS-MS coupling via OPP, a high-throughput assay (10–15 s per sample) with limits of detection in the sub-ng/mL range was developed. Succinctly, we demonstrated that by tuning adequate ion mobility separation conditions, SPME-OPP-MS can be employed to quantify non-resolved compounds or those otherwise hindered by co-extracted isobaric interferences without further need of coupling to other separation platforms.

Open Port Probe Sampling Interface for the Direct Coupling of Biocompatible Solid-Phase Microextraction to Atmospheric Pressure Ionization Mass Spectrometry.

In recent years, the direct coupling of solid phase microextraction (SPME) and mass spectrometry (MS) has shown its great potential to improve limits of quantitation, accelerate analysis throughput, and diminish potential matrix effects when compared to direct injection to MS. In this study, we introduce the open port probe (OPP) as a robust interface to couple biocompatible SPME (Bio-SPME) fibers to MS systems for direct electrospray ionization. The presented design consisted of minimal alterations to the front-end of the instrument and provided better sensitivity, simplicity, speed, wider compound coverage, and high-throughput in comparison to the LC-MS based approach. Quantitative determination of clenbuterol, fentanyl, and buprenorphine was successfully achieved in human urine. Despite the use of short extraction/desorption times (5 min/5 s), limits of quantitation below the minimum required performance levels (MRPL) set by the world antidoping agency (WADA) were obtained with good accuracy (≥90%) and linearity (R2 > 0.99) over the range evaluated for all analytes using sample volumes of 300 μL. In-line technologies such as multiple reaction monitoring with multistage fragmentation (MRM3) and differential mobility spectrometry (DMS) were used to enhance the selectivity of the method without compromising analysis speed. On the basis of calculations, once coupled to high throughput, this method can potentially yield preparation times as low as 15 s per sample based on the 96-well plate format. Our results demonstrated that Bio-SPME-OPP-MS efficiently integrates sampling/sample cleanup and atmospheric pressure ionization, making it an advantageous configuration for several bioanalytical applications, including doping in sports, in vivo tissue sampling, and therapeutic drug monitoring.

Direct Coupling of Solid-Phase Microextraction with Mass Spectrometry: Sub-pg/g Sensitivity Achieved Using a Dielectric Barrier Discharge Ionization Source.

We report a new strategy for the direct coupling of Solid-Phase Microextraction (SPME) with mass spectrometry, based on thermal desorption of analytes extracted on the fibers, followed by ionization by a dielectric barrier discharge ionization (DBDI) source. Limits of detection as low as 0.3 pg/mL and a linear dynamic range of ≥3 orders of magnitude were achieved, with a very simple and reproducible approach. Different from direct analysis in real time (DART), desorption electrospray ionization (DESI), or low-temperature plasma (LTP), the desorption of the analytes from the SPME devices in our setup is completely separated from the ionization event. This enhances the reproducibility of the method and minimizes ion suppression phenomena. The analytes were quantitatively transferred from the SPME to the DBDI source, and the use of an active capillary ionization embodiment of the DBDI source greatly enhanced the ion transmission to the MS. This, together with the extraordinary sensitivity of DBDI, allowed subpg/mL sensitivities to be reached and to skip conventional and time-consuming chromatographic separation.

Coupling of solid phase microextraction with electrospray ionization ion mobility spectrometry and direct analysis of venlafaxine in human urine and plasma

The capability of electrospray ionization-conventional ion mobility spectrometry (ESI–IMS) for direct analysis of the samples extracted by solid phase microextraction (SPME) was investigated and evaluated for the first time. To that end, an appropriate new desorption chamber was designed and constructed, resulting in the possibility of direct exposure of the SPME fiber to the electrospray solvent flow. Two different elution methods in dynamic and static modes were exhaustively investigated. The results indicated that the interface could help us to have an accurate and sensitive analysis without disturbing the electrospray process, in static elution method. Venlafaxine as a test compound was extracted from human urine and plasma by a convenient headspace SPME method. The positive ion mobility spectrum of the extracted drug was obtained and the analyte responses were calculated. The coupled method of SPME–ESI–IMS was comprehensively validated in terms of sensitivity, dynamic range, and recovery percentage. Finally, various real samples of human urine and plasma were analyzed, all verifying the feasibility and success of the proposed method for the easy routine analysis.

Solid phase microextraction coupled to liquid chromatography. Analysis of organosulphur compounds avoiding artifacts formation

This work proposes the novel application of a microextraction technique, solid phase microextraction (SPME), coupled to liquid chromatography with UV detection (HPLC–UV) for the analysis of organosulfur compounds (OSCs) in garlic samples. Additionally, a comparative study of OSCs profiles obtained by SPME coupled to HPLC–UV and gas chromatography with flame photometric detector (GC–FPD), respectively; was carried out. This study provided complementary evidence about OSCs’s lability and “artifacts” formation during the analytical process. Raw, cooked and distilled garlic samples were considered. The target analytes were diallyl disulphide (DADS), diallyl sulphide (DAS), diallyl trisulphide (DATS), allicin, 3-vinyl-4H-1,3-dithiin (3-VD), 2-vinyl-4H-1,2-dithiin (2-VD) and (E)- and (Z)-ajoene, which are the most important OSCs with biological activities present in raw and processed garlic. The coupling of SPME and HPLC showed to be reliable, fast, sensible and selective methodology for OSCs analysis.

Sol–gel microextraction phases for sample preconcentration in chromatographic analysis

Sol-gel technology provides a simple and reliable method for solid-phase microextraction (SPME) fiber preparation through in situ creation of surface-bonded organic-inorganic hybrid coatings characterized by enhanced thermal stability and solvent-resistance properties that are important for the coupling of SPME with GC and HPLC, respectively. The sol-gel coating technology has led to the development of an extensive array of sol-gel sorbent coatings for SPME. In this article, sol-gel microextraction coatings are reviewed, with particular attention on their synthesis, characterization, and applications in conjunction with GC and HPLC analyses. In addition, the development of sol-gel-coated stir bars, their inherent advantages, and applications are discussed. Next, the development and applications of sol-gel capillary microextraction (CME) in hyphenation with GC and HPLC is extensively reviewed. The newly emerging germania- and titania-based sol-gel microextraction phases look promising, especially in terms of pH and hot solvent stability. Finally, sol-gel monolithic beds for CME are reviewed. Such monolithic beds are in a position to greatly improve the extracting capabilities and enhanced sensitivity in CME.