Electromagnetic Field Coupling Research Articles

Optical feedback-induced spatiotemporal patterns with power law spectra in a liquid crystal light valve.

Pattern formation can be induced by coupling electromagnetic fields to a polarizable and lossy medium. Increasing energy injection patterns can exhibit aperiodic behaviors. We investigate the self-organization of unidimensional aperiodic patterns. Based on a liquid crystal light valve (LCLV) with optical feedback, we observed aperiodic one-dimensional patterns with power laws in the temporal and spatial spectrum density of the light intensity, and their pseudo envelope and phase characteristic of spatiotemporal complexity. Theoretically, a local model describes the system close to nascent bistability and spatial instability. Numerical simulations of this model show chaotic spatiotemporal patterns whose temporal and spatial spectra have exponents similar to those observed experimentally.

Principle of the electromagnetic testing based on the varied frequency domain and its realization

With the development of modern industry, the types and quantities of industrial equipment are increasing. In the long-term production process, various failure modes such as corrosion and cracks will occur, therefore the workload of inspection will increase dramatically. It is extremely urgent to study the combined non-destructive testing (NDT) technology and develop corresponding multi-functional instruments to achieve rapid inspection. In this paper, an electromagnetic testing principle based on the varied frequency domain is proposed. In the first place, spatial uniformity and spatial periodic static fields are generated by the arrangement of the permanent magnetizers, these static fields are fields with different spatial frequencies. In the second place, dynamic fields with different frequencies are generated by different frequencies excitations. Under the time-space electromagnetic field coupling, a new combined electromagnetic testing principle of magnetic flux leakage (MFL), guided wave (GW) and electromagnetic acoustic transducer (EMAT) is proposed. The MFL testing method can be realized based on the uniform static field, GW based on the interaction of spatial periodic static field and low frequency dynamic field, while EMAT based on the combination of uniform static field and high frequency dynamic field. According to the above principle, a multi-functional instrument is developed, which includes a medium-low frequency excitation unit for GW, a high frequency excitation unit for EMAT, corresponding receiving amplifiers for GW/EMAT/MFL, and USB-based data transmitters. Finally, the relevant performance tests are carried out, which laid the foundation for field application.

Experimental study on preheating and salt circulation performance of a single receiver tube based on induction heating

The design of a light source for a molten salt receiver experimental system has become challenging owing to the complex heating characteristics of the half-circumference surface during operation. Electromagnetic induction heating is an innovative technology that can replicate a half-circle heating scenario. However, its feasibility must be verified. In this study, we constructed a single receiver tube experimental system using induction heaters and developed a 3D numerical model coupling electromagnetic field to analyze the tube temperature distribution and molten salt temperature rise during preheating and salt circulation, considering various parameters. The results indicated that the numerical simulation agreed well with the experimental results, and the induction heater successfully reproduced the half circumference heating scenario. During preheating, a lower heat flux and higher wind speed result in a more uniform temperature distribution along the circumference of the tube wall, facilitating comprehensive preheating. During salt circulation, the heat flux and inlet salt mass flow significantly affected the temperature of the tube wall but had a relatively small effect on the back-side wall. Wind speed had the opposite effect, which was related to the arrangement of the experimental site. A higher heat flux, lower wind speed, and higher inlet salt mass flow led to a higher temperature increase in the molten salt.

One-dimensional SERS nanoprobes based on cellulose nanocrystals and their biomaging performance

Surface enhanced Raman scattering spectroscopy (SERS) technology has received increasing attention in the bioimaging field. Herein, based on the support of cellulose nanocrystal (CNC) with thiol groups, one-dimensional (1D) "hot spot" structure was constructed by the self-assembly of gold nanoparticles (AuNPs) via Au-S bonding. Silica shell was subsequently coated on the CNC loaded with AuNPs to fabricate core-shell SERS nanoprobe, which was further successfully applied for the SERS imaging of Hela cells. Owing to the presence of silica shell, the nanoprobe exhibited excellent water-dispersible stability in phosphate buffer salt solution (PBS). Moreover, the silica shell effectively protected both the "hot spot" structure and the adsorbed Raman reporter of 4-mercaptobenzoic acid from external interference, thereby improving the signal stability of SERS nanoprobe. In addition, the plasma coupling of electromagnetic field between AuNPs and silica significantly enhanced the Raman signal of "hot spots". The SERS nanoprobe possessed good biocompatibility even at relatively high concentrations, and successfully achieved bioimaging of Hela cell using the Raman signal at 1580 cm−1 channel.

Dynamic characteristics testing and modeling in electromagnetic-thermal-force coupling of electromagnetic devices using parallel finite element simulation

Electromagnetic systems of Electromagnetic devices involve multiphysics coupling of electromagnetic fields, electrical circuits, mechanical motion, and temperature fields. When the digital prototype model has a large number of meshes, the commercial finite element software also has the disadvantage of long computation time in the simulation of dynamic characteristics of electrical apparatus. This paper proposes a transmission line method (TLM) based digital modeling method for the electromagnetic-thermal-force coupling to test and evaluate the static and dynamic characteristics of electromagnetic devices more accurately and efficiently. The case study is developed on a direct current (DC) contactor, and the dynamic characteristics testing and modeling in the electromagnetic-thermal-force coupling of the contactor are investigated. The numerical results of the finite element method (FEM) model for the electromagnetic system of the contactor are compared with the commercial FEM software Altair Flux and the experimental results, which demonstrate the exceptional accuracy of the proposed digital modeling method for the multiphysics coupling of the DC contactor. Meanwhile, the dynamic characteristics of the DC contactor at different ambient temperatures are measured and evaluated, and the comparison with the experimental measurements shows the applicability of the proposed digital prototype model at different ambient temperatures. Compared with the conventional Newton-Raphson (NR) iteration, when dividing fine mesh and extremely fine mesh, the TLM parallel computing significantly improves the efficiency of solving the dynamic characteristics of multiphysics coupling by about 35 % and 44 % with the same computational accuracy, respectively. The dynamic characteristics evaluation method combined with digital modeling technology and experimental measurements proposed in this paper demonstrates high accuracy and solving efficiency, making a notable contribution to the field of design and optimization of electromagnetic devices.

Ag Nanoparticles@Au Nanograting Array as a 3D Flexible and Effective Surface-Enhanced Raman Scattering Substrate.

Surface-enhanced Raman scattering (SERS) is a powerful analytical technique for chemical identification, but it remains a great challenge to realize the large-scale and well-controlled fabrication of sensitive and repeatable SERS substrates. Here, we report a facile strategy to fabricate centimeter-sized periodic Au nanograting (Au-NG) decorated with well-arranged Ag nanoparticles (Ag-NPs) (denoted as Ag-NPs@Au-NG) as a three-dimensional (3D) flexible hybrid SERS substrate with high sensitivity and good reproducibility. The Au-NG patterns with periodic ridges and grooves are fabricated through nanoimprint lithography by employing a low-cost digital versatile disc (DVD) as a master mold, and the Ag-NPs are assembled by a well-controlled interface self-assembly method without any coupling agents. Multiple coupling electromagnetic field effects are created at the nanogaps between the Ag-NPs and Au-NG patterns, leading to high-density and uniform hot spots throughout the substrate. As a result, the Ag-NPs@Au-NG arrays demonstrate an ultrahigh SERS sensitivity as low as 10-13 M for rhodamine 6G with a high average enhancement factor (EF) of 1.85 × 108 and good signal reproducibility. For practical applications, toxic organic pollutants including crystal violet, thiram, and melamine have been successfully detected with high sensitivity at a low detection limit, showing a good perspective in the rapid detection of toxic organic pollutants.

Construction of the Au Nanoparticle/Graphene Oxide/Au Nanotube (AuNP/GO/AuNT) Sandwich Membrane for Surface-Enhanced Raman Scattering Sensing.

Au nanotube-based composite membrane served as surface-enhanced Raman scattering (SERS) substrate with an ultralarge aspect ratio possesses an excellent flexibility and widely tunable surface plasmon resonance, and by introducing graphene oxide (GO) as a spacer layer, the SERS enhancement of the composite membrane is obviously better than those from the individual blocks of the Au nanotubes (AuNTS) membrane and the Au nanoparticle/graphene oxide (AuNP/GO) membrane. Such a "sandwich" (AuNP/GO/AuNT) structured membrane has a high SERS sensitivity and a wide tunability by controlling the size of Au nanoparticles and the thickness of graphene oxide, and the detection limits of the AuNP/GO/AuNT substrate for R6G and NBA are as low as 10-12 and 10-7 M, respectively; the large enhancement is attributed to the adsorption and chemical mechanism of graphene oxide and the physical mechanism of the Au nanoparticles and nanotubes (the electromagnetic field coupling between them).

Predicting the coupling of HPEM waveform with a power amplifier in perforated conductive enclosure using FDDM/VF

AbstractOne of the most common methods to protect electronic and telecommunication systems in a high‐power electromagnetic (HPEM) environment is using a conductive enclosure. Amplifiers are the vital parts in transmitter and receiver systems as the main components of a telecommunication system, so investigating the effects of HPEM waveform on their performance is very important. The Presence of apertures in the body of the conductive enclosure, as well as non‐linear elements such as transistors in amplifiers, adds to the complexity of examining the coupling of electromagnetic fields on the performance of amplifiers. Considering the importance of the topic, in this study, the impact of the HPEM waveform on the power amplifier inside the conductive enclosure has been investigated. By using the finite difference delay modelling (FDDM) numerical method as a stable method followed by the vector fitting (VF) method, the electromagnetic problem has become a circuit problem, which allows examining the response of the power amplifier and any circuit, including non‐linear elements against the interference field. Responses of bipolar linear and non‐linear components in the perforated conductive enclosure by the proposed method have been compared with the results obtained by computer simulation technology microwave studio (CST‐MWS) for verification.

Multiphysics modelling of constant power microwave heating of model juice

Constant power microwave heating (CPMH) based on solid-state generators, a new microwave heating system, shows better repeatability than traditional microwave heating (TMH) powered by magnetron when performing experiments, while its detailed heating patterns and field distribution are still not fully understood. In this study, numerical simulations for model juice (about 1–5 mL) heated by CPMH and TMH systems were carried out to compare the heating performance. The simulation was performed through coupling electromagnetic, thermal and fluid fields, using a laminar flow model to simulate the flow behaviour of the model juice during the heating operation. Both surface temperature distributions and inner point temperatures were investigated for model validation, and the simulated data agreed well with the experimental ones, indicating that the modelling was rational and correct. Results showed that CPMH gave higher heating efficiency and better temperature uniformity, which was verified by determining both inner point temperature and surface temperature distribution. Besides, influences of sample volume and microwave input power on the heating performance of the CPMH system were studied, suggesting that greater sample volume could cause worse temperature uniformity, although a faster temperature increase was observed. When fixing total microwave input energy to 3 kJ, different input powers were found to achieve similar final average volumetric temperatures (50.46 °C–51.22 °C) but significantly different heating uniformity (final coefficient of temperature variance: 0.065–0.115), indicating that smaller microwave input power could contribute to better heating uniformity. It is hoped that this study could provide references to further understand the heating effects of CPMH systems, leading to better design and upgrade for microwave heating systems.

High-Frequency Electromagnetic Field Coupling to Transmission Line With Discontinuity Above a Lossy Ground

High-Frequency Electromagnetic Field Coupling to Transmission Line With Discontinuity Above a Lossy Ground

Electromagnetic field-mediated chitosan/gelatin/nano-hydroxyapatite and bone-derived scaffolds regulate the osteoblastic and chondrogenic phenotypes of adipose-derived stem cells to construct osteochondral tissue engineering niche in vitro

It is critical to explore the effects of electromagnetic field (EMF) on the construction of functional osteochondral tissue, which has shown certain clinical significance for the treatment of osteochondral injury. At present, there are few studies on the effect of the direction of EMF on cells. This study aimed to investigate the effects of EMF coupling on different parameters to control adipose-derived stem cells (ADSCs) proliferation and specific chondrogenic and osteogenic differentiation at 2D level and 3D level. The proliferation and differentiation of EMF-induced ADSCs are jointly regulated by EMF and space structure. In this study, Cs7/Gel3/nHAP scaffolds were prepared with good degradation rate (86.75 ± 4.96 %) and absorb water (1100 %), and the pore size was 195.63 ± 54.72 μm. The bone-derived scaffold with a pore size of 267.17 ± 129.18 μm was obtained and its main component was hydroxyapatite. Cs7/Gel3/nHAP scaffolds and bone-derived scaffolds are suitable as 3D level materials. The optimal EMF intensity was 2 mT for chondrogenic differentiation and proliferation and 1 mT for osteogenic differentiation and proliferation. It is noteworthy that EMF has a negative correlation with ADSCs proliferation in the vertical direction at 2D level, while it has a positive correlation with ADSCs proliferation at 3D level. EMF mediated 3D osteochondral scaffold provide good strategy for osteochondral tissue engineering construction.

Temperature mapping model of cables considering the coupling of electromagnetic and thermal field

Background During cable operation, its internal temperature reflects the actual working condition of the cable. Once overload occurs, its conductor temperature will rise rapidly. Under high temperature conditions, the insulation material is very prone to breakdown accidents, which seriously threatens the safety of the power system. The traditional method of calculating the internal temperature of cables suffers from low accuracy and time-consuming problems. Methods To quickly and accurately calculate the cable’s internal temperature, a cable temperature mapping model is proposed with the coupling of electromagnetic and thermal field taken into consideration. Firstly, a finite element model is formulated based on the cable structure and material parameters. Secondly, the coupling between electromagnetic and thermal field is analyzed, and multiple coupling calculations are performed iteratively according to the operating conditions. Finally, the mapping between temperature and current is established using the exponential function. The cable surface temperatures under five operating conditions are measured online and compared with the calculated results of the temperature mapping model. Results Under five operating conditions, the average absolute error of the proposed model is 0.628 °C, and the average calculation time is 0.005 s. The average absolute error of the traditional model is 0.635 °C, and the average calculation time is 201.86 s. Conclusions The temperature mapping model developed in this paper can quickly and accurately calculate the cable’s internal temperature and forms an important part of the digital twin model of the cable.

Analysis of pressure drop and response characteristics of an enhanced radial magnetorheological valve based on magneto-fluidic coupling

To analyze the pressure drop characteristics of MR valves more realistically, a simulation method of coupling electromagnetic field and flow field was proposed in this paper. An enhanced radial MR valve with radial and annular compound paths was proposed, and its structure and working principle were also elaborated. Next, the mathematical equation of pressure drop was established using the non-Newtonian constitutive model of MR fluid Bingham-Papanastasiou. The dual physical model was completed by the sequential coupling way based on Maxwell equation and Naiver stokes equation. The distribution law of electromagnetic field and flow field in the process of mutual coupling was numerically simulated by COMSOL software. Furthermore, a series of pressure drop and response characteristics tests were performed for the proposed MR valve. Through the experimental analysis, it could be seen that the pressure drop and response time of the MR valve hardly change with the applied load and flow rate, while the pressure drop increases significantly and the dynamic response time basically decreases with the augment of the applied current. At an excitation current of 1.6 A, the maximum pressure drop of the experiment and simulation was 4.46 MPa and 4.84 MPa, respectively. Consequently, all the maximum relative errors were less than 7.9 %.

Pulsed electromagnetic field coupling to a transmission line with arbitrary loads—A unified methodology based on reciprocity

A unified description of the time-domain (TD) electromagnetic (EM) field coupling to a transmission line (TL) that is terminated by arbitrary linear time-invariant loads is presented. Closed-form expressions for the electric current induced in the loads are derived with the aid of the EM reciprocity theorem of the time-convolution type. The validity of the solution is demonstrated via illustrative numerical examples.

Hybrid Integration of Au Nanoplates and Ag Nanoparticles with Controlled Nanogaps via Cu2O‐mediated Galvanic Replacement Reaction: Plasmonic Catalysis and Photothermal Conversion

AbstractRational assembling of different noble metal nanocrystals with controlled nanogaps in one entity allows the efficient coupling of electromagnetic fields of each component and versatile manipulation over the overall physiochemical properties. In the present study, we report a stepwise synthetic strategy to hybridlike assemble Au nanoplate and Ag nanoparticles without direct physical contact. Particularly, the success of current work relies on the conformal coating of Cu2O over the Au nanoplate as an intermediate layer, followed by the in situ formation of Ag nanoparticles via the galvanic replacement reaction between Cu2O and Ag+. With the anchoring of Ag nanoparticles over the Cu2O‐wrapped Au nanoplate, the resulting hybrid nanostructures exhibit noticeable multiple plasmonic absorptions across the UV‐vis‐NIR region. The potential use as the plasmonic catalyst for current Au@Cu2O‐Ag hybrid products is validated using reduction of 4‐nitrophenol as the model reaction, where the catalytic performance is greatly improved by the UV‐vis light irradiation. They also exhibit satisfactory photothermal conversion performance under the irradiation of Xe lamp. The current work provides a niche strategy to create noble‐metal hybrid nanostructures with controlled interparticle distance and tunable plasmonic properties, could be extended to other noble metal or alloys.

Thermal error modelling for linear motor feed drive system considering multi-field coupling of electromagnetic-thermal-flow

Thermal error is a crucial factor affecting the accuracy of linear motor feed drive systems (LMFDS). To improve the prediction accuracy, a thermal error model for LMFDS considering the multi-field coupling of electromagnetic-thermal-flow (EM-TF) is proposed. Firstly, the thermal error mechanism is analyzed and the temperature control equation of LMFDS is deduced under multi-field coupling of electromagnetic, thermal, and flow fields. Then, aiming at the difficulty to solve the control equation directly, an indirect solution method is proposed. According to the simplification conditions of the actual process, the control equation is divided into three stages and then recoupled together. Finally, a prediction model for LMFDS thermal error is established based on the temperature equation and thermal expansion theory. Compared with traditional models, the proposed model has a good physical meaning and prediction accuracy. In addition, experiments have proven that the model can automatically adjust the linear and nonlinear intervals, fully reflecting the entire changing process of thermal error in LMFDS.

An ultrabroadband metamaterial absorber based on remarkable magnetic coupling via constructing conductive composite resonators and magnetic gradient gyroid structure

ABSTRACT Broadband electromagnetic absorbing is still a challenge due to the huge difference of waves properties in different frequency bands. Herein, based on the transmission-line theory, we propose an in-plane hybrid metamaterial absorber using coupled resonators and gradient gyroid structure to realise the ultrabroadband absorbing. The coupled resonators based on Ag–Cu alloy/ABS conductive composite serve as transmission lines to orient the dipolar magnetic field, while the gradient gyroid structure fabricated by FCI/PEEK composite boosts the strong induced magnetic field. The unique hybrid strategy contributes to the remarkable magnetic coupling interaction, which not only realises good bandwidth extending effect, but also demonstrates the enhancement of absorbing efficiency. Finally, the 3D-printed hybrid metamaterial absorber achieves the high-efficiency absorbing in 2.2–40 GHz due to the electromagnetic field coupling resonance and synergistic loss effect. This absorber shows promising potential in real-life application by reasons of the low-frequency broadband absorption and convenient manufacturing.

Analysis and Optimization of Contact Material Ablation under the Cumulative Effect of the Number of Breakings of OLTC.

Vacuum on-load tap-changers (OLTC) for converter transformers have a much higher number of breakings than conventional circuit breakers. Contact ablation after several breakings will affect the stability and life of the device. This paper establishes the electromagnetic thermal multi-physical field coupling model of the vacuum interrupter for OLTC based on the finite element analysis method. The thermal field distribution of normal and ablative contact materials during the breaking process was analyzed. The key parameters affecting the contact temperature under the cumulative number of breakings are analyzed and the optimized design is completed. The simulation results show that the contact surface reaches a maximum temperature of 1390 K at 8 ms. There is a significant increase in the area of the high-temperature area on the contact surface. The possibility of re-ignition of the interrupter is increased. Based on the judgment matrix method, the key influencing parameters of the contact temperature rise are analyzed. The final parameters are selected as follows: contact material-CuCr8 alloy, contact seat thickness-2 mm, contact thickness-10 mm, and contact diameter-40 mm.

Characterization of magneto-thermo-hydrodynamic lubrication of metal liquid film at armature/rail interface

Utilizing the magneto-thermo-hydrodynamic lubrication theory, this study investigates the armature/rail(A/R) interface under high-intensity currents and transient high-temperature conditions. A magneto-thermo-hydrodynamic lubrication model is established using the finite difference method, coupling electromagnetic field, temperature field, and hydrodynamic lubrication theory, to depict the lubrication mechanism of the A/R interface under the influence of electromagnetic and thermal interactions. The characteristics of magneto-thermal diffusion for the armature/ rail, and the dynamic lubrication properties of the metal liquid film at the interface, are analyzed, to investigate how to improve the contact state of the A/R interface and enhance the stability of the electromagnetic rail launch. The findings are of significant importance for predicting frictional and thermal losses at the A/R interface and enhancing its performance.

Deep anharmonicity on the relativistic spin-0 particles within the spherical regime

We present an oscillator model of relativistic spin-0 charges moving in quantum states with minimal electromagnetic field coupling. Rather than using a perturbative approach, we implemented anharmonicity directly under the integer-dependent levels. In this way, the rest mass energy is kept at 280[Formula: see text]MeV. Within the extended Pekeris approximation, we have also improved the deep approximation to the third and fourth orders near equilibrium at 7.5[Formula: see text]fm with a width range of [Formula: see text]. By taking into account the Morse potential energy, the improved approximation provides a model for the relativistic quantum states of the spatially independent rest mass without an external magnetic field. We considered an extra-energy addition that results in shifted Morse potentials in the depth range of 80–100[Formula: see text]MeV, yielding positive and negative values for particles and antiparticles, respectively. As a result of the shift, it has been concluded that the potential depth of the charged particle affects the relativistic energy levels, where we have found about 200[Formula: see text]MeV for particles and nearly [Formula: see text]10[Formula: see text]MeV for antiparticles. In addition to the negative energy states, the wave functions ([Formula: see text], [Formula: see text]) and ([Formula: see text], [Formula: see text]), which correspond to the energy levels, have been followed by the typical probability form, which shows charge distribution.