Coupled Plasma Optical Emission Spectrometry Research Articles

Effectiveness of energy dispersive X-ray fluorescence for the quantification of mineral elements in skim milk and whey powders

Milk and whey are subjected to quick deterioration due to bacterial growth. Turning them into powder allows for extended shelf life, easier storage, and more effective transport. Monitoring mineral elements in dairy powders is crucial for both technological and nutritional implications. Current analysis of minerals in food matrices is time consuming and requires high costs and labor. In this view, energy dispersive x-ray fluorescence (ED-XRF) may represent a potential alternative technique to rapidly determine mineral content of food matrices. The present study aimed to investigate the effectiveness of ED-XRF technique for the prediction of Na, Mg, P, S, K, Ca, Cu, and Zn in skim milk and whey powders. Reference analysis for mineral concentration in dairy powders was inductively coupled plasma optical emission spectrometry. The accuracy of ED-XRF for the prediction of mineral elements was assessed on all available samples (global calibration set; n = 23), and after splitting the whole data in a training set (n = 16) and a testing set (n = 7), comprising 70% and 30% of the available samples, respectively. The accuracy of prediction was moderate to low for Na and Mg, whereas robust predictions were obtained for P, S, K, Ca, Cu, and Zn, with coefficients of determination in global calibration from 0.88 to 0.99, and ratios performance to deviation in testing from 2.14 to 24.74. Results suggest that ED-XRF can be considered for accurate prediction of main mineral elements in dairy powders.

Mineral Nutrition In The Leaves of Cocculus hirsutus (L) Under Pathogenesis

The present research paper deals with mineral content in the leaves of Cocculus hirsutus(L) affected by powdery mildew fungus Oidium Sp. (Imperfect stage). The healthy and infected leaves were digested by tri-acid, prescribed by Toth et al., (1948) method. The digested sample was further subjected to Inductive Coupled Plasma Optical Emission spectroscopy. ICP-OES (Agilent 5800ICP-OES FEQ’S), MY 1523001 software version: 7.3.0.8799. Firm ware version: 3354 for analysis of mineral element. The infected leaf shows enhanced content in potassium, iron, manganese, copper, nickel, chromium, and aluminium element. On the Contrary, elements such as magnesium, sodium, calcium, lead, zinc, boron, strontium and thallium were reduced in their contents reflect a high metabolic activity during pathogenesis.

Influence of support properties on the activity of 2Cr-Fe/MgO-MO2 catalysts (M = Ce, Zr, CeZr and Si) for the dehydrogenation of n-octane with CO2

The influence of the support on catalytic activity and stability of supported 2Cr-Fe bimetallic catalysts for the CO2-assisted dehydrogenation (DH) of n-octane has been investigated. Four MgO modified supports viz; MgO-CeO2 (MgCe), MgO-ZrO2 (MgZr), MgO-CeO2-ZrO2 (MgCeZr) and MgO-SiO2 (MgSi) were synthesized by the sol-gel combustion technique. The supported catalysts were in turn prepared by vacuum impregnation and thereafter tested for the CO2-assisted DH of n-octane. The catalysts were characterized by inductively coupled plasma optical emission spectroscopy (ICP-OES), X-ray diffraction (XRD), N2-physisorption, Raman spectroscopy, transmission electron microscopy (TEM), electron dispersive x-ray (EDX), temperature programmed desorption of CO2 (CO2-TPD), temperature programmed reduction and oxidation (H2-TPR and CO2-TPO), electron paramagnetic resonance (EPR) and thermal gravimetric analysis (TGA) techniques. Raman results showed that the CrOx is stabilized as mono- and/or polynuclear Cr(VI) species over the 2Cr-Fe/MgCe catalyst, which are reduced to lower oxidation state species during the DH reaction. The 2Cr-Fe/MgZr, 2Cr-Fe/MgCeZr and 2Cr-Fe/MgSi catalysts stabilized the CrOx as polymerized species, forming the more active Cr-O-Fe polymer units on the catalysts’ surface. XRD, TEM and EDX results showed that the ZrO2-containing supports have smaller particles and stabilized the active metal oxides in a more dispersed amorphous state. The CO2-TPO of the pre-reduced catalysts and EPR of the used catalysts indicated that the 2Cr-Fe/MgCeZr undergoes significant re-oxidation by CO2 during the catalytic process. The 2Cr-Fe/MgCe was the least active, while the 2Cr-Fe/MgZr catalyst showed the best performance and stability over three regeneration cycles. Selectivity to C8 products (octenes and aromatics) was found to strongly depend on the surface basicity of the catalysts. Deactivation of the catalysts was found to follow first order kinetics and coke deposition was identified as the major cause.

Unsupervised and interpretable discrimination of lithium-bearing minerals with Raman spectroscopy imaging

As lithium-bearing minerals become critical raw materials for the field of energy storage and advanced technologies, the development of tools to accurately identify and differentiate these minerals is becoming essential for efficient resource exploration, mining, and processing. Conventional methods for identifying ore minerals often depend on the subjective observation skills of experts, which can lead to errors, or on expensive and time-consuming techniques such as Inductively Coupled Plasma Mass Spectrometry (ICP-MS) or Optical Emission Spectroscopy (ICP-OES). More recently, Raman Spectroscopy (RS) has emerged as a powerful tool for characterizing and identifying minerals due to its ability to provide detailed molecular information. This technique excels in scenarios where minerals have similar elemental content, such as petalite and spodumene, by offering distinct vibrational information that allows for clear differentiation between such minerals. Considering this case study and its particular relevance to the lithium-mining industry, this manuscript reports the development of an unsupervised methodology for lithium-mineral identification based on Raman Imaging. The deployed machine-learning solution provides accurate and interpretable results using the specific bands expected for each mineral. Furthermore, its robustness is tested with additional blind samples, providing insights into the unique spectral signatures and analytical features that enable reliable mineral identification.

The Application of Atomic Spectroscopy Techniques in the Recovery of Critical Raw Materials from Industrial Waste Streams, Part II

This month’s column is Part 2 of a contribution from my daughter Glenna, who recently completed her PhD studies in Environmental Science from the University of Copenhagen in Denmark. Her article explores the current landscape of global critical raw materials (CRM) trends in research and the applications of atomic spectroscopy (AS), including inductively coupled plasma–mass spectrometry (ICP-MS), inductively coupled plasma–optical emission spectrometry (ICP-OES), and X-ray analytical techniques in their identification of diverse industrial and environmental media, which have been essential in method validation and quantification of CRMs in complex matrices presenting high risks of interference. Some important examples to be presented include rare earth elements (REEs) in water leaching purification (WLP) residues that co-occur with radioactive materials; REEs and other metals in acid mine drainage (AMD) environments; REEs in coal combustion (fly ash) residues; arsenic (As) from groundwater treatment sediment; and platinum-group elements (PGEs) from sewage sludge. The article also classifies the different techniques in use at each stage of the CRM recovery train, investigates present challenges to each analytical method, and discusses the problem-solving tools used.

Regulated Inductively Coupled Plasma–Optical Emission Spectrometry Detectible Elements in Utah Lake: Characterization and Discussion

During the 2021 (n = 15) and 2022 (n = 13) summers, we measured the total and dissolved (<0.45 μm) concentration of 25 elements in Utah Lake using Inductively Coupled Plasma–Optical Emission Spectrometry (ICP-OES) with detection limits in the order of a few parts-per-billion (ppb). This resulted in 1400 measurements, which is a unique dataset in terms of sensitivity and temporal resolution. Regulated elements are not commonly measured at the ppb-level; thus, these data provide insight into both the behavior and existence of these elements in an aquatic environment and have implications for both the management and regulation of the lake. Utah regulates twelve of these elements. While ICP-OES has ppb-level sensitivity, it is not the approved regulatory analysis method for these elements. All regulations are for dissolved concentrations, except aluminum (Al) and phosphorus (P), which are for total recovery. We found total Al above the allowable concentration, but dissolved concentrations were well below allowable concentrations. We attribute high total concentrations to suspended clays. This suggests that regulatory methods should be reviewed for lakes with a high suspended-solid content. Dissolved copper (Cu) concentrations were below regulatory levels in 2021, but some samples were above regulatory levels in 2022. This could be related to the use of Cu-based algaecide treatments, or from other sources. Lead (Pb) data were inconclusive; dissolved Pb concentrations were well below the acute (1 h average) limit, but the chronic concentration limit (4 h average) was below the ICP-OES minimal detection limit. Arsenic (As) concentrations exhibited a seasonal trend that we attribute to groundwater inflows—they were below regulatory levels for aquatic environments but around the levels for drinking water. This ppb-level study with high temporal resolution provides insight into regulated elements in Utah Lake previously not available due to the high sensitivity of the method and measurements of both total and dissolved concentrations.

In vitro effect of Lenzites betulinus mushroom against therapy-induced DNA damage in peripheral blood lymphocytes of patients with acute coronary syndrome

Ethnopharmacological relevanceAcute coronary syndrome (ACS) represents a group of diseases that are the result of reduced blood flow to the heart. There are natural products, based on mushrooms, used traditionally in the treatment of cardiovascular diseases. Aim of the studyAssessment of the potential protective effect of L. betulinus mushroom against therapy-induced DNA damage in lymphocytes of patients with ACS in relation to the phytochemical properties of the mushroom. Materials and methodsThe study included 30 ACS patients and 30 healthy controls. The genotoxic potential of acetone and ethanol extract of L. betulinus was evaluated using the comet assay. The contents of minerals were determined by inductively coupled plasma optical emission spectrometry. Determination of sugars and organic acids was performed using a DIONEX ICS 3000 DP liquid chromatography system. Analysis of fatty acids was performed at Focus GC coupled with PolarisQ mass spectrometer. The total phenolic and flavonoid contents in the mushroom extracts were measured using spectrophotometric methods. The qualitative and quantitative content of polyphenolic compounds was investigated by the UHPLC-DADMS/MS method. ResultsThe comet assay showed that both mushroom extracts did not increase the level of DNA damage in the lymphocytes of healthy individuals, while they significantly decreased the %DNA damage and genetic damage index (p < 0.0005) in the therapy-induced lymphocytes of patients. The mushroom was very rich in phytochemical composition. The results showed that the most abundant components in the mushroom were phosphorus, potassium, sodium, sulfur, and calcium among minerals and glucose, fructose, galactose, sorbitol, and turanose among carbohydrates. Among organic acids were present in higher concentrations malic, citric, and maleic acids, while among fatty acids, the most abundant were trans-linoleic, cis-oleic, palmitic, docosahexaenoic and eicosadienoic acids. The results showed that the highest amount of total phenols and flavonoids in the mushroom extracts were obtained in the acetone extract. The most abundant polyphenolic compounds were chlorogenic acid and quercetin in both extracts of mushroom. ConclusionsThis study indicates that L. betulinus can be considered a mushroom with a high nutritional and functional value. Extracts of the mushroom were not genotoxic in tested concentrations in cultured human lymphocytes of healthy individuals, while in ACS patients they manifested a protective effect against therapy-induced DNA damage. The acetone extract showed a stronger protective effect against therapy-induced DNA damage, which is consistent with its phytochemical composition.

Harnessing phosphate limestone waste as a cost-effective solution for acid mine drainage treatment

Mining mineral ores like pyrrhotite often generates positive and negative outcomes for the community. On the one hand these valuable minerals are explored to provide economic opportunities. On the other, mining pyrrhotite presents adverse environmental and health effects that relates to acid mine drainage (AMD) formation in abandoned mines. This suggest that the sustainable mining of valuable minerals in Pyrrhotite requires cost and environmentally friendly approaches. In this research, we simulate in-situ neutralisation effect of phosphate limestone waste (PLW) on AMD from two mining sites in Morocco under continuous oxic conditions. To this end, we conducted batch tests to assess the effectiveness of PLW in mitigating AMD and releasing contaminants. These tests involved reacting limestone particles (at two sizes: <2 cm and < 4 cm) with AMD leachates over a five-day period The results indicated that the AMD is characterised by a pH of 2.5 and an electrical conductivity of 11.8 mS/cm. The inductively coupled plasma optical emission spectroscopy (ICP-OES) analyses showed a high sulfate concentration of 3668.83 mg/L and the presence of some metals, notably copper, aluminium, and iron. The neutralisation process of the AMD using PLW under oxic conditions was highlighted by the variation in pH while the water was in contact with the PLW. The pH rose from 2.5 to 5.25 while the electrical conductivity decreased from 11.8 to 7.03 mS/cm. During the treatment of the AMD with PLW, the percentage of sulfate removal from the effluent was 35 %. In addition, iron and aluminium were significantly removed from the AMD with a percentage of 99 % in the leachate. Therefore, these results indicate that neutralising AMD using this passive treatment approach is effective and may serve as a cost-effective mitigation for AMD, since no excessive grinding is required for the PLW.

Assessment of potential human health, radiological and ecological risks around mining areas in northeastern Brazil.

Mining is responsible for the release of metallic pollutants and radioactive materials into the environment, which have the potential to disrupt ecosystems and pose significant risks to human health. Significant mining activity is concentrated in the municipality of Caetité (northeastern Brazil), where Latin America's only active uranium mine and significant iron ore deposits are located. Although previous studies have shown that the regional soil and water resources are highly contaminated by various toxic elements and that exposure to these elements is known to have adverse effects on human health, the health risks in this mining region have never been assessed. The aim of this unprecedented comprehensive investigation was to assess the health, radiological and ecological risks in this mining region, which is home to nearly 100,000 people. To achieve our goal, soil and water samples were collected in the vicinity of the mines and in the main settlements in the region. Fifteen metallic toxic elements were determined using Instrumental Neutron Activation Analysis and Inductively Coupled Plasma Optical Emission Spectrometry. The HERisk code, which follows the main methodological guidelines for risk assessment, was used to quantify human health, radiological and ecological indices. The average values of the total risk and cancer risk indices indicated that region falls into the moderate risk category (1.0 ≤ HItot < 4.0). However, 63% of the sites had high risk values, with Fe, Co and As being the metals contributing most to total and cancer risk, respectively. Near the mining areas, the potential ecological risk can be considered extreme (PERI ≥ 600). The values of the calculated radiological indices correspond to typical values ​​in natural uranium areas. However, in the communities near the mine, the dose values are slightly above the permissible limit (1 mSv y-1), so they must be continuously monitored, and risk mitigation measures must be taken.

Investigation of the Complexation Activity of 2,4-Dithiouracil with Au(III) and Cu(II) and Biological Activity of the Newly Formed Complexes

The goal of this study is to synthesize, determine the structure, and examine the antimicrobial properties of novel Cu(II) and Au(III) complexes of 2,4-dithiouracil and its derivatives. These complexes were obtained by mixing aqueous solutions of the corresponding metal salts with the ligand dissolved in DMSO and aqueous NaOH, using a metal-to-ligand ratio of 1:4:2. The structures of the new compounds were analyzed by melting point determination, microwave plasma atomic emission spectrometry (MP-AES) for Cu and Au, inductively coupled plasma optical emission spectrometry (ICP-OES) for S, attenuated total reflection (ATR), solution and solid-state NMR, and Raman spectroscopy. The data for 2,4-dithiouracil obtained from the 1H NMR, 13C NMR, distortionless enhancement by polarization transfer spectrum (DEPT-135), proton–proton homonuclear correlation spectrum (1H-1H COSY), long-range 1H-13C heteronuclear multiple bond correlation experiment (HMBC), and heteronuclear single quantum coherence spectra (HSQC) aided the interpretation of the NMR data for the gold and copper complexes. Furthermore, the antimicrobial effect of the free ligands and their complexes was assessed against Gram-positive and Gram-negative bacteria, as well as yeasts.

Synthesis and crystal structure of new Mn (III) complex; a target catalyst for direct conversion of thiols after heterogenization

In this study, we are interested in the synthesizing of a new water-soluble complex of Mn (III) formulated as [Mn(pzo)(dipic)(H2O)2]2·3H2O; hereafter referred to as complex 1 where pzo− = pyrazonate and dipic2− = pyridine-2,6-dicarboxylate, under hydrothermal conditions. The molecular structure of complex 1 is primarily determined by single crystal X-ray diffraction (SC-XRD) which shows two mono-nuclear complexes of Mn (III) with three lattice water molecules. According to SC-XRD, complex 1 crystallizes in space group P1¯ of a triclinic system. The center of Mn (III) is seven-coordinated with a distorted pentagonal-bipyramidal geometry with three oxygen atoms and two nitrogen atoms in the equatorial plane. Two oxygen atoms of two water molecules are coordinated in the axial positions. In addition, the structure of complex 1 has been studied by elemental analysis (CHN), Fourier-transform infrared spectroscopy (FT-IR (, thermogravimetric analysis/differential thermal analysis/differential thermogravimetry (TGA/DTA/DTG). Complex 1 has been immobilized on the silica-coated Fe3O4 nanoparticles to produce an efficient and recyclable heterogeneous catalyst formulated as Fe3O4@SiO2@1; hereafter referred to as catalyst 1. Catalyst 1 was characterized by inductively coupled plasma optical emission spectrometry (ICP-OES), energy-dispersive X-ray spectrometer (EDS), FT-IR, scanning electron micrograph (SEM), powder X-ray diffraction pattern (PXRD), and Brunner-Emmet-Teller (BET). 1 was used as a new heterogeneous catalyst for the oxidative coupling of thiols to their corresponding disulfides using 30 % H2O2. Under optimum reaction conditions, catalyst 1 exhibited high catalytic activity. 1 can be recovered by a magnet and reused for at least 7 consecutive cycles without significant loss of catalytic performance.

Vaginal Ovule Loaded with Bismuth Lipophilic Nanoparticles and Cetylpyridinium Chloride Inhibits Human Cervical Carcinoma and Candida albicans Growth.

Bismuth lipophilic nanoparticles (BisBAL NPs) and cetylpyridinium chloride (CPC) are antineoplastic and antimicrobial in vitro. As a next pre-clinical step, a clinically viable dosage form for vaginal application was developed. Compendial pharmacopeial tests (mass uniformity, disintegration, and compressive mechanics) and inductively coupled plasma optical emission spectroscopy were conducted on in-house developed glycerinated gelatin (60:15 v/w) vaginal ovules containing BisBAL NP-CPC. The antimycotic activity of BisBAL NP-CPC vaginal ovules was analyzed using disk diffusion and cell viability XTT assays. The antitumor properties of BisBAL NP-CPC vaginal ovules were assessed by cell viability MTT tests. BisBAL NP-CPC and drug-free vaginal ovules deposited into ex vivo porcine vaginas disaggregated without signs of adverse cytotoxicity within the timespan of clinical efficacy. BisBAL NP-CPC vaginal ovules demonstrated antifungal efficacy comparable to miconazole: C. albicans growth inhibition haloes in diffusion tests were 23 ± 0.968 mm (n = 3) for BisBAL NP-CPC and 20.35 ± 0.899 mm (n = 3) for miconazole. Likewise, BisBAL NP-CPC vaginal ovules reduced HeLa cell growth by 81%, outperforming the clinical reference of 500 μM 5-fluouracil, which induced a 70% growth inhibition. BisBAL NP-CPC incorporated into glycerinated gelatin vaginal ovules constitute an innovative drug delivery system for topical antimycotic and anti-cervical carcinoma treatments.

Carcinogenic and non-carcinogenic health risk assessment of heavy metals in the offal of animals from Felele Abattoir, Lokoja, Nigeria

The consumption of metal-contaminated offal of animals will affect the health of humans. Thus, the research determined the concentrations of heavy metals in the offal and muscle tissues of cows, goats, and ram slaughtered at the main abattoir in Lokoja, northcentral Nigeria. Furthermore, an evaluation was carried out to assess the potential health hazards faced by the indigenous population due to the consumption of heavy metals from these animals. The mean concentrations of metals (Al, Cd, Cr, Ni, and Pb) in the kidney, liver, and muscle of cows, goats, and rams were determined using Inductively Coupled Plasma Optical Emission Spectrometry. Estimated daily intake of the metals, hazard quotient, hazard index, and cancer risk were calculated. All internal organs had Ni levels above the regulatory threshold limit. The average concentration of Pb in the muscle tissue and liver of the tested animals exceeded the permissible limits by the WHO. Similarly, the concentration of Cd in the muscle tissues was above the Maximum Permissible Limit (MPL) of 0.05 mg kg−1. Except for cow kidneys, all internal organs contain Cr levels below the MPL (1.0) limit. The THQ value for the metals was < 1 except Cd. It indicates potential health risks due to Cd. The calculated HI values were > 1. The percentage contribution of Cd to the HI value was the highest. The observed sequence is Cd > Ni > Cr > Pb > Al. The results show that eating the offal and muscle under investigation has a carcinogenic effect.

Nickel and cobalt incorporated mesoporous HZSM-5 catalysts for biofuel production from bio-oil model compounds

Bio-oil obtained through the gasification or pyrolysis of biomass is a renewable energy source with the potential to be used in motor vehicles. However, when the properties of bio-oil are compared to crude oil, bio-oil is observed to have high oxygen content and acidity. The aim of this study is to enhance the physical properties of bio-oil and produce new alternative fuels to crude oil. For this purpose, nickel and cobalt-incorporated mesoporous HZSM-5 catalysts have been synthesized. The synthesized catalysts were characterized by X-ray diffraction, N2 adsorption–desorption, Scanning electron microscopy energy dispersive spectroscopy, Inductively coupled plasma optical emission spectroscopy, Fourier-transformed infrared spectroscopy, and thermogravimetric/differential thermal analysis. In the study, formic acid, furfural, and hydroxypropanone were used as model components. To enhance catalyst activity, nickel was loaded onto the HZSM-5 catalyst. However, during biofuel production, a significant amount of coke was formed as a by-product. Therefore, cobalt was impregnated to reduce coke formation. In the activity test studies, a conversion in the range of 77–84% was achieved with HZSM-5 catalysts. Nickel addition increased the paraffin and olefin content in the biofuel along with bio-oil conversion. The maximum paraffin selectivity (97%) was provided with the 5Ni@HZSM-5 catalyst. However, the highest biofuel selectivity (77.5%) with the minimum coke formation (4%) was observed with the 5Co-5Ni@HZSM-5. In the study, the regeneration and long-term catalytic activity were also investigated, and the results showed that 5Co-5Ni@HZSM is an attractive catalyst for biofuel production from bio-oil.

Physicochemical characterization of experimental resin-based materials containing calcium orthophosphates or calcium silicate

ObjectiveTo evaluate experimental dimethacrylate-based materials containing calcium orthophosphates or calcium silicate particles in terms of their optical, mechanical and Ca2+ release behaviour. MethodsDicalcium phosphate dihydrate (DCPD), hydroxyapatite (HAp), beta-tricalcium phosphate (β-TCP) or calcium silicate (CaSi) particles were added to a photocurable BisGMA/TEGDMA resin (1:1 in mols) at a 30 vol% fraction. Materials containing silanized or non-silanized barium glass particles were used as controls. Degree of conversion (DC) at the top and base of 2-mm thick specimens was determined by ATR-FTIR spectroscopy (n = 5). Translucency parameter (TP) and transmittance (%T) were determined using a spectrophotometer (n = 3). Biaxial flexural strength (BFS) and flexural modulus (FM) were determined by biaxial flexural testing after 24 h storage in water (n = 10). Ca2+ release in water was determined during 28 days by inductively coupled plasma optical emission spectrometry (n = 3). Statistical analysis was performed using ANOVA/Tukey test (DC: two-way; TP, %T; BFS and FM: one-way; Ca2+ release: repeated measures two-way, α = 5 %). Results: CaSi and β-TCP particles drastically reduced DC at 2 mm, TP and %T (p < 0.001). Compared to both controls, all Ca2+-releasing materials presented lower BFS (p < 0.001) and only the material with DCPD showed significantly lower FM (p < 0.05). The material containing CaSi presented the highest Ca2+ release, while among materials formulated with calcium orthophosphates the use of DCPD resulted in the highest release (p < 0.001). SignificanceCaSi particles allowed the highest Ca2+ release. Notwithstanding, the use of DCPD resulted in a material with the best compromise between optical behaviour, DC, strength and Ca2+ release.

Magnetic curcumin–copper graphene oxide as facile and recyclable heterogeneous nanocatalyst for preparation of polyhydroquinolines and sulfoxides

In this research project, a versatile procedure has been designed for the preparation of supported copper@curcumin on magnetic graphene oxide nanoparticles (GO@Fe3O4@Cur–Cu). The structure of prepared nanocatalyst was characterized by several techniques including; Fourier transform infrared, powder X-ray diffraction, thermal gravimetric analysis, energy dispersive X-ray analysis, inductively coupled plasma optical emission spectroscopy, vibrating sample magnetometer, transmission electron microscopy, and scanning electron microscopy analyses. The catalytic properties of GO@Fe3O4@Cur–Cu were examined for the efficient synthesis of polyhydroquinolines as well as the preparation of sulfoxides through selective oxidation of sulfides in the presence of hydrogen peroxide.

Profiling and health risk assessment of trace metal contents in bovine tissues: A case study in Gondar City, Ethiopia

This study aimed to determine six trace metal (Cu, Mn, Zn, Cd, Cr, and Pb) concentrations in three bovine tissues (kidney, liver and muscle) from Gondar City abattoir, Ethiopia, and assess associated health risks. Samples were digested with HNO3/HClO4, and metal concentrations were analyzed by Inductively Coupled Plasma Optical Emission Spectroscopy. Zn exhibited the highest concentration in muscle (52.1 mg/kg), whereas Cd was below the LOD (0.6 µg/kg) in all muscle samples. The levels of Cd, Cr, and Mn in liver and kidney tissues, as well as Zn in muscle, exceeded FAO/WHO safety thresholds. Principal component analysis revealed distinct metal accumulation patterns among the tissues where liver is the target organ for accumulation of Pb, Mn and Cu, while kidney appears to be the organ of preference for Cd and Cr accumulation. Zn had the highest chronic daily intake for both children and adults, followed by Cu. Hazard index values for both age groups were below one, indicating no non-carcinogenic risks. However, the incremental lifetime cancer risks and cumulative carcinogenic risks of Cr exceeded the tolerable limit for adults and children, indicating a high cancer likelihood from this trace metal. In contrast, the incremental lifetime cancer risks of Pb for both adults and children were within acceptable limits. In conclusion, cumulative carcinogenic risk values indicate that consuming muscle tissue poses health risks for both adults and children, highlighting the need for stricter cattle feed regulations in the study area to safeguard public health.

Elemental Profiling of Common Anti-diabetic Medicinal Plants of Swat and Peshawar Districts of Khyber Pakhtunkhwa (KPK) Province of Pakistan: An Investigation Using PIXE and ICP-OES.

The use of medicinal plants is integral to addressing liver, heart, lung, and other metabolic issues. These plants are rich in vitamins, minerals, flavonoids, and alkaloids, which collectively help in lowering intestinal glucose absorption and increasing insulin secretion by pancreatic tissues. Elemental analysis, encompassing major, minor, and trace elements, was performed on various parts (leaves, roots, and seeds) of 16 anti-diabetic medicinal plants collected from different regions of Swat and Peshawar in Khyber Pakhtunkhwa (KPK), Pakistan. This analysis utilized proton-induced X-ray emission (PIXE) and inductively coupled plasma optical emission spectroscopy (ICP-OES) techniques. Our PIXE and ICP-OES analysis revealed the presence of major (Ca, K, S, P), minor (Si, Cl), and trace (Al, Mn, Fe, Ni, Cu, Zn, Se, Cr, and Sc) elements in various parts (leaves, roots, and seeds) of the 16 anti-diabetic medicinal plants studied. Specifically, elements such as Ca, K, Cr, Cu, Mn, Zn, and Se were detected, all of which are known to contribute in maintaining normal glucose metabolism. Notably, Zn and Se are crucial trace elements for the synthesis, secretion, and action of insulin. Significant Zn concentrations were observed in ten anti-diabetic medicinal plants: Albizia lebbeck (AL), Atropa acuminata (AA), Avena fatua (AF), Citrus medica (CM), Commiphora wightii (CW), Cymbopogon citratus (CC), Daucus carota (DC), Ziziphus mauritiana (FM), Hyoscyamus niger (HN), and Martynia annua (MA), and significant Se concentrations were observed in twelve medicinal plants, i.e., Albizia lebbeck (AL), Allium sativum (AS), Atropa acuminata (AA), Avena fatua (AF), Cannabis sativa (CS), Capparis spinosa (CaS), Commiphora wightii (CW), Cymbopogon citratus (CC), Datura alba (DA), Daucus carota (DC), Ziziphus mauritiana (FM), and Hyoscyamus niger (HN). Our study's elemental analysis using PIXE and ICP-OES on various parts of 16 medicinal plants identified a significant number of useful elements. Elements such as Ca, K, S, P, Al, Si, Cl, Mn, Fe, Ni, Cu, Zn, Se, and Cr were identified and quantified. These findings support the potential use of these plants in managing diabetes and highlight the importance of elemental profiling in understanding their therapeutic properties.

Plant-Based Alternatives to Mold-Ripened Cheeses as an Innovation among Dairy Analogues.

There is a growing demand for vegan products and plant-based food when dealing with the impact of livestock on the climate crisis. The aim of this study was to develop a formulation for a plant-based analogue of mold-ripened cheese. Were investigated the following plant materials: cashews, pistachios, soy flour, chickpea flour, pea protein, pumpkin protein, hemp protein, and spirulina powder. Plant matrices were fermented with lactic acid bacteria (LAB) starter cultures and cheese starter cultures of mold species Geotrichum candidum and Penicillium camemberti. All microorganisms' growth were tested in a vegan-type culture medium. Calcium supplementation was applied and followed by an in-depth analysis of the elemental composition of selected analogues with inductively coupled plasma optical emission spectroscopy. The physicochemical and organoleptic analyses of plant-based alternatives of Camembert were conducted. This is the first paper describing novel formulations for plant-based alternatives for Camembert cheese prepared with techniques mimicking the original milk product.

A novel magnetized bio-solid phase extractor for the preconcentrations of Hg(II), Ni(II) and Zn(II) from foods

Herein, Agaricus augustus, a mushroom, loaded on γ-Fe2O3 magnetic nanoparticles was developed as a biosorbent for the simultaneous preconcentrations of trace levels of Hg(II), Ni(II), and Zn(II)) in tap water, beverages, and some food samples prior to their determination by inductively coupled plasma optical emission spectrometry (ICP-OES). The experimental factors affecting the extraction performance were carefully examined throughout the investigation. The best experimental conditions were determined as pH 4.0, 3 mL/min of sample flow rate, 75 mg of biosorbent, 100 mg of γ-Fe2O3 magnetic nanoparticles, and 500 mL of sample volume. LOD values were determined as 0.016, 0.011, and 0.023 ng/mL, respectively for Hg(II), Ni(II), and Zn(II). The biosorption capacities were determined as 47.2 mg/g for Hg(II), 51.5 mg/g for Ni(II), and 49.0 mg/g for Zn(II). The effectiveness of the recommended method was assessed using certified reference material.