Corrected Density Functionals Research Articles

Hexachlorobenzene (HCB) adsorption onto the surfaces of C60, C59Si, and C59Ge: Insight from DFT, QTAIM, and NCI

Several reports have shown that nanomaterials have been found to be effective for gas sensing application and the adsorption of hazardous organochloride. Herein, dispersion corrected density functionals; D3-B3LYP-D3, ωB97XD, M06-2X and PBE0 all at the 6-311G (d) basis set was used to study the interactions of metal-doped fullerenes (silicon (C59Si) and germanium (C59Ge)) with Hexachlorobenzene (C6Cl6) gas molecule. The adsorption properties of the adsorbents viz; the pure fullerene nanocage (C60) and the doped system; Silicon (C59Si) and Germanium (C59Ge) were all investigated in terms of reactivity, stability, bond order, intermolecular interaction, van der waals, and weak interaction as well as adsorption energy. The reactivity levels of the examined surfaces were observed within the same range at the B3LYP-D3/6-311G (d) level of theory to be 5.996 eV, 5.309 eV, and 5.188 eV for C60, C59Si and C59Ge adsorbents respectively. From our calculation for adsorption energies; the high negative value -1.010 eV of for the C59Ge nanocage suggests that the doped surface adsorbs hexachlorobenzene better in comparison to the other surfaces and adsorption is thermodynamically favored. The results for natural bond orbitals (NBO), quantum theory of atoms in molecules (QTAIM), and non-covalent interaction (NCI) were consistent across all systems and favored physical adsorption.

Synthesis and characterization of a computationally predicted redox and radiation stable deep eutectic solvent

• DFT calculations towards finding suitable HBD and HBA for the formation of redox and radiation stable DES. • Phase diagram to depict the molar ratio of the constituents in the new DES. • Stabilization energy calculation of the predicted new DES. • Experimental synthesis and characterization of the DES predicted from computational calculations. • Radiation stability study and by-product analysis of the as synthesized DES under gamma irradiation. A redox and radiation stable DES has been predicted based on the fundamental electronic properties such as energy gap, ionization potential and electron affinity computed applying suitable density functionals in combination with 6-311++G(d,p) set of atomic basis functions. A selected series of optimized hydrogen bond donors (HBDs) and hydrogen bond acceptors (HBAs) has been screened using density functional theory (DFT). The long range corrected density functionals; ωB97XD and LC-BLYP are found to be cost effective and appropriate towards orbital energy gap calculations of such systems. Choline acetate and malonic acid appeared to be the most appropriate combination among those studied for formation of a chemical and radiation stable DES. Theoretically constructed phase diagram using Gibbs free energy minimization technique is applied to suggest the eutectic point and eutectic composition of the recommended DES. Stabilization energy calculations following electronic structure support the phase diagram data denoting formation of a stable eutectic with 1:2 stoichiometry. Density, viscosity, differential scanning calorimetry (DSC) and Fourier transform infra-red (FTIR) experiments have been carried out with this synthesized DES. Measured glass transition temperature (−75 °C) is observed to be lower than the theoretical eutectic point (−40 °C) indicating strong interspecies interaction within the medium. Experimental FTIR analysis gives an idea of the type and number of H-bonds present within the DES whereas computationally optimized 1:2 geometry identifies the specific H-bonds along with their distances. Irradiation of this new DES has been conducted at a constant dose of 100 kGy to observe the extent of degradation. UV–Vis and FTIR analysis does not denote generation of any new species within the liquid phase upon irradiation, however the yields of the gaseous by-products have been quantified by Gas Chromatography (GC).

Conceptual DFT-Based Computational Peptidology, Pharmacokinetics Study and ADMET Report of the Veraguamides A-G Family of Marine Natural Drugs.

As a continuation of our research on the chemical reactivity, pharmacokinetics and ADMET properties of cyclopeptides of marine origin with potential therapeutic abilities, in this work our already presented integrated molecular modeling protocol has been used for the study of the chemical reactivity and bioactivity properties of the Veraguamides A–G family of marine natural drugs. This protocol results from the estimation of the conceptual density functional theory (CDFT) chemical reactivity descriptors together with several chemoinformatics tools commonly considered within the process of development of new therapeutic drugs. CP-CDFT is a branch of computational chemistry and molecular modeling dedicated to the study of peptides, and it is a protocol that allows the estimation with great accuracy of the CDFT-based reactivity descriptors and the associated physical and chemical properties, which can aid in determining the ability of the studied peptides to behave as potential useful drugs. Moreover, the superiority of the MN12SX density functional over other long-range corrected density functionals for the prediction of chemical and physical properties in the presence of water as the solvent is clearly demonstrated. The research was supplemented with an investigation of the bioactivity of the molecular systems and their ADMET (absorption, distribution, metabolism, excretion, and toxicity) parameters, as is customary in medicinal chemistry. Some instances of the CDFT-based chemical reactivity descriptors’ capacity to predict the pKas of peptides as well as their potential as AGE inhibitors are also shown.

Charge-Separation and Charge-Recombination Rate Constants in a Donor-Acceptor Buckybowl-Based Supramolecular Complex: Multistate and Solvent Effects.

The kinetics of the nonradiative photoinduced processes (charge-separation and charge-recombination) experimented in solution by a supramolecular complex formed by an electron-donating bowl-shaped truxene-tetrathiafulvalene (truxTTF) derivative and an electron-accepting fullerene fragment (hemifullerene, C30H12) has been theoretically investigated. The truxTTF·C30H12 heterodimer shows a complex decay mechanism after photoexcitation with the participation of several low-lying excited states of different nature (local and charge-transfer excitations) all close in energy. In this scenario, the absolute rate constants for all of the plausible charge-separation (CS) and charge-recombination (CR) channels have been successfully estimated using the Marcus–Levich–Jortner (MLJ) rate expression, electronic structure calculations, and a multistate diabatization method. The outcomes suggest that for a reasonable estimate of the CS and CR rate constants, it is necessary to include the following: (i) optimally tuned long-range (LC) corrected density functionals, to predict a correct energy ordering of the low-lying excited states; (ii) multistate effects, to account for the electronic couplings; and (iii) environmental solvent effects, to provide a proper stabilization of the charge-transfer excited states and accurate external reorganization energies. The predicted rate constants have been incorporated in a simple but insightful kinetic model that allows estimating global CS and CR rate constants in line with the most generalized three-state model used for the CS and CR processes. The values computed for the global CS and CR rates of the donor–acceptor truxTTF·C30H12 supramolecular complex are found to be in good agreement with the experimental values.

Simplified tuning of long-range corrected density functionals for use in symmetry-adapted perturbation theory

Long considered a failure, second-order symmetry-adapted perturbation theory (SAPT) based on Kohn-Sham orbitals, or SAPT0(KS), can be resurrected for semiquantitative purposes using long-range corrected density functionals whose asymptotic behavior is adjusted separately for each monomer. As in other contexts, correct asymptotic behavior can be enforced via "optimal tuning" based on the ionization energy theorem of density functional theory, but the tuning procedure is tedious, expensive for large systems, and comes with a troubling dependence on system size. Here, we show that essentially identical results are obtained using a fast, convenient, and automated tuning procedure based on the size of the exchange hole. In conjunction with "extended" (X)SAPT methods that improve the description of dispersion, this procedure achieves benchmark-quality interaction energies, along with the usual SAPT energy decomposition, without the hassle of system-specific tuning.

Embedded equation-of-motion coupled-cluster theory for electronic excitation, ionisation, electron attachment, and electronic resonances

The projection-based quantum embedding method is applied to a comprehensive set of electronic states. We embed different variants of equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) theory in density functional theory and investigate electronically excited states of valence, Rydberg, and charge-transfer character, valence- and core-ionised states, as well as bound and temporary radical anions. The latter states, which are unstable towards electron loss, are treated by means of a complex-absorbing potential. Besides transition energies, we present Dyson orbitals and natural transition orbitals for embedded EOM-CCSD. We benchmark the performance of the embedded EOM-CCSD methods against full EOM-CCSD using small organic molecules microsolvated by a varying number of water molecules as test cases. Our results illustrate that embedded EOM-CCSD describes ionisation and valence excitation very well and that these transitions are quite insensitive towards technical details of the embedding procedure. On the contrary, more care is required when dealing with Rydberg excitations or electron attachment. For the latter type of transition in particular, the use of long-range corrected density functionals is mandatory and truncation of the virtual orbital space proves to be difficult.

Van der Waals corrected density functionals for cylindrical surfaces: Ammonia and nitrogen dioxide adsorbed on a single-walled carbon nanotube

We extend the damped Zaremba-Kohn model (dZK) for long-range dispersion interaction between a molecule and a planar surface [J. Tao, H. Tang, A. Patra, P. Bhattarai, and J. P. Perdew, Phys. Rev. B 97, 165403 (2018)] to molecules adsorbed on a curved cylindrical surface, and employ this extended model as an additive correction to the semilocal density functionals PBE (Perdew-Burke-Ernzerhof) and SCAN (strongly constrained and appropriately normed). The resulting PBE+vdW (van der Waals)-dZK and SCAN+vdW-dZK are applied to two systems, $\mathrm{N}{\mathrm{H}}_{3}$ and $\mathrm{N}{\mathrm{O}}_{2}$ molecules adsorbed on a single-wall carbon nanotube (CNT), for calculations of binding energies and equilibrium distances. For comparison, the results from vdW nonlocal functionals, such as SCAN+rVV10 and PBE+rVV10, are also presented. The binding energies from PBE+rVV10 (Vydrov and Van Voorhis), SCAN+rVV10, PBE+vdW-dZK, and SCAN+vdW-dZK are about 70--115 meV for the system of $\mathrm{CNT}+\mathrm{N}{\mathrm{H}}_{3}$ and 300--500 meV for the system of $\mathrm{CNT}+\mathrm{N}{\mathrm{O}}_{2}$. The results from PBE+vdW-dZK and SCAN+vdW-dZK are closer to each other than those from PBE+rVV10 and SCAN+rVV10 are. The relatively closer results from PBE+vdW-dZK and SCAN+vdW-dZK indicate the consistency of our developed vdW\ensuremath{-}dZK model for cylindrical surfaces. All methods, including PBE, SCAN, PBE+rVV10, SCAN+rVV10, PBE+vdW-dZK, and SCAN+vdW-dZK, give approximately the same binding energy differences between two adsorption configurations (types I and II) for the two systems. This implies that the two adsorption sites have approximately the same adsorption stability. The exponent of the vdW interaction power law from our vdW-dZK model for the two systems is about 0 at short distance, largely due to the damping factor, and tends slowly to \ensuremath{-}4 to \ensuremath{-}4.5 at distances $D$ about 20--50 \AA{}. At even larger distances, the vdW power-law exponent approaches \ensuremath{-}5. This feature is very similar to the one calculated with random-phase approximation and renormalization group approaches, supporting the applicability of our methods. Our developed vdW-dZK method provides a highly efficient and reliable method for large systems with cylindrical surfaces, such as vdW interactions with nanotubes.

Non long-range corrected density functionals incorrectly describe the intensity of the CH stretching band in polycyclic aromatic hydrocarbons.

We present a comprehensive study of the most relevant numerical aspects influencing frequencies and intensities in the infrared spectrum of isolated polycyclic aromatic hydrocarbons (PAHs) regarding the overestimate of the IR CH-stretching bands. We use naphthalene as benchmark and show the validity of our results to different members of the PAH family. Our analysis relies on widely employed density functional theory methods and second-order vibrational perturbational theory for the computation of vibrational eigenstates. We have focused on the elucidation of the origin of the systematic overestimate of the intensities in the CH-stretching region. To rule out nonfundamental numerical errors, we have initially considered the influence of the electronic basis set and various other parameters on the different stages of the vibrational analysis. In a second stage, we have benchmarked the results of different density functional theory functionals with respect to the aforementioned overestimate taken as the ratio between the most prominent features of the spectrum, the CH-bending and the CH-stretching bands. Our results unambiguously indicate that the long-range correction plays a major role in this spurious numerical issue. More specifically, this phenomenon is due to an incorrect description of the charge distribution (and hence dipole) within the symmetrically relevant CH bonds. Long-range correction specifically remedies this issue. It improves the description of the intensities in the stretching region while at the same time it does not perturb significantly the rest of the spectrum. With respect to the frequencies, we have observed an overall improvement when compared to noncorrected functionals.

Efficient hierarchical models for reactivity of organic layers on semiconductor surfaces.

Computational modeling of organic interface formation on semiconductors poses a challenge to a density functional theory-based description due to structural and chemical complexity. A hierarchical approach is presented, where parts of the interface are successively removed in order to increase computational efficiency while maintaining the necessary accuracy. First, a benchmark is performed to probe the validity of this approach for three model reactions and five dispersion corrected density functionals. Reaction energies are generally well reproduced by generalized gradient approximation-type functionals but accurate reaction barriers require the use of hybrid functionals. Best performance is found for the model system that does not explicitly consider the substrate but includes its templating effects. Finally, this efficient model is used to provide coverage dependent reaction energies and suggest synthetic principles for the prevention of unwanted growth termination reactions for organic layers on semiconductor surfaces.

Assessing the Tamm-Dancoff approximation, singlet-singlet, and singlet-triplet excitations with the latest long-range corrected double-hybrid density functionals.

We continue our work on the long-range corrected double-hybrid density functionals (LC-DHDFs) ωB2PLYP and ωB2GP-PLYP that we developed in the context of time-dependent (TD) Density Functional Theory (DFT) to enable the robust description of singlet-singlet excitations [M. Casanova-Páez, M. B. Dardis, and L. Goerigk, J. Chem. Theory Comput. 15, 4735 (2019)]. In our initial study, we only assessed the impact of a LC on BLYP-based DHDFs, and herein, we extend our understanding by providing the first test of PBE-based LC-DHDFs within the established TD-DHDF scheme. Moreover, this study is one of few that provides a direct comparison between TD-DHDFs and their faster Tamm-Dancoff-approximation variants (TDA-DHDFs). Most importantly, this is the first TDA-DHDF study since Grimme and Neese's TDA-B2PLYP [J. Chem. Phys. 127, 154116 (2007)] and the first work on TD-DHDFs that addresses singlet-triplet excitations. We show how the difference between TD-DHDFs and TDA-DHDFs is often negligible for singlet-singlet excitations, but how one has to apply TDA-DHDFs for triplet excitations. For both excitation types, the LC is beneficial to the BLYP-based DHDFs, but detrimental to the PBE-based ones. For local-valence and Rydberg excitations, ωB2PLYP and ωB2GP-PLYP as well as the global DHDF PBE-QIDH can be recommended. If a transition exhibits charge-transfer character, ωB2PLYP and ωB2GP-PLYP should be applied. An analysis of the gaps between the first singlet and triplet excited states of our systems revealed that there is room for further improvements to reach better robustness. Until that goal has been achieved, we recommend ωB2PLYP and ωB2GP-PLYP as some of the currently best TDA-DFT methods.

Noncovalent Quantum Machine Learning Corrections to Density Functionals.

We present noncovalent quantum machine learning corrections to six physically motivated density functionals with systematic errors. We demonstrate that the missing massively nonlocal and nonadditive physical effects can be recovered by quantum machine learning models. The models seamlessly account for various types of noncovalent interactions and enable accurate predictions of dissociation curves. The correction improves the description of molecular two- and three-body interactions crucial in large water clusters and provides a reasonable atomic-resolution picture about the interaction energy errors of approximate density functionals that can be useful information in the development of more accurate density functionals. We show that given sufficient training instances the correction is more flexible than standard molecular mechanical dispersion corrections, and thus it can be applied for cases where many dispersion corrected density functionals fail, such as hydrogen bonding.

The influence of driving force on intramolecular electron transfer: A theoretical study of subphthalocyanine‐AzaBODIPY‐C60 supramolecular triad

AbstractThe driving force of electron transfer is one of important factors for initializing inter‐ and intramolecular charge separation. In this work, the main goal is to understand how driving force determines electron transfer pathway in subphthalocyanine‐AzaBODIPY‐C60 supramolecular triad. Experimental observations have suggested that there are only two intramolecular charge transfer states (subPC+‐AzaBODIPY−‐C60 and subPC+‐AzaBODIPY‐C60−) after photon absorption, where subPC is the donor. Through the calculations by using tuned long range corrected density functionals with polarizable continuum model, we find two more new intramolecular charge transfer states: subPC−‐AzaBODIPY+‐C60 and subPC‐AzaBODIPY+‐C60−, where AzaBODIPY is the donor. We compare the HOMO/LUMO energy of subPC, AzaBODIPY, and C60 monomers to their corresponding orbital energy in the triad. The results indicate that the driving force (HOMO/LUMO energy offsets) is not enough for electron transfer from AzaBODIPY to subPC or C60, which can explain why subPC−‐AzaBODIPY+‐C60 and subPC‐AzaBODIPY+‐C60− intramolecular charge transfer states cannot be observed in the experiment. In addition, this work may provide a simple and practical method to find the intramolecular charge transport pathway of a supramolecule.

Chemically accurate excitation energies with small basis sets.

By combining extrapolated selected configuration interaction (sCI) energies obtained with the Configuration Interaction using a Perturbative Selection made Iteratively algorithm with the recently proposed short-range density-functional correction for basis-set incompleteness [E. Giner et al., J. Chem. Phys. 149, 194301 (2018)], we show that one can get chemically accurate vertical and adiabatic excitation energies with, typically, augmented double-ζ basis sets. We illustrate the present approach on various types of excited states (valence, Rydberg, and double excitations) in several small organic molecules (methylene, water, ammonia, carbon dimer, and ethylene). The present study clearly evidences that special care has to be taken with very diffuse excited states where the present correction does not catch the radial incompleteness of the one-electron basis set.

Data-driven distributionally robust optimization approach for reliable travel-time-information-gain-oriented traffic sensor location model

Travel time is one of the most intuitive pieces of traffic information to help decision makers to control real-time traffic conditions and to guide travelers to choose a reasonable route. An optimal sensor location scheme can obtain reliable route travel time information. Most current travel-time-oriented sensor location models are deterministic and assume a given and correct travel time probability density function. Nevertheless, due to widespread observational and systematic errors, prior travel time information is not accurate or reliable. In our study, a novel data-driven link-based network sensor location method is proposed to maximize travel time information gain. The effect of route differentiation is considered, and the sensors are located at links rather than at nodes. In addition, to account for the uncertainty in the prior travel time distribution, the distributionally robust travel time information gain sensor location (DRTTIGSL) model is presented. The prior distribution information is taken into account based on a statistical measure called ϕ-divergence. The ϕ-divergence is used to construct the uncertainty set. The reformulation of DRTTIGSL is dependent on the choice of ϕ-divergence and is tractable. Extensive numerical experiments are conducted to verify the effectiveness of the DRTTIGSL model. Compared with the optimal solutions for the deterministic model, the optimal solutions for the DRTTIGSL model can reduce the worst-case situation with a small price of the average objective value, especially when the total budget is not large.

Valence and charge-transfer optical properties for some SinCm (m, n ≤ 12) clusters: Comparing TD-DFT, complete-basis-limit EOMCC, and benchmarks from spectroscopy.

Accurate optical characterization of the closo-Si12C12 molecule is important to guide experimental efforts toward the synthesis of nano-wires, cyclic nano-arrays, and related array structures, which are anticipated to be robust and efficient exciton materials for opto-electronic devices. Working toward calibrated methods for the description of closo-Si12C12 oligomers, various electronic structure approaches are evaluated for their ability to reproduce measured optical transitions of the SiC2, Si2Cn (n = 1-3), and Si3Cn (n = 1, 2) clusters reported earlier by Steglich and Maier [Astrophys. J. 801, 119 (2015)]. Complete-basis-limit equation-of-motion coupled-cluster (EOMCC) results are presented and a comparison is made between perturbative and renormalized non-iterative triples corrections. The effect of adding a renormalized correction for quadruples is also tested. Benchmark test sets derived from both measurement and high-level EOMCC calculations are then used to evaluate the performance of a variety of density functionals within the time-dependent density functional theory (TD-DFT) framework. The best-performing functionals are subsequently applied to predict valence TD-DFT excitation energies for the lowest-energy isomers of SinC and Sin-1C7-n (n = 4-6). TD-DFT approaches are then applied to the SinCn (n = 4-12) clusters and unique spectroscopic signatures of closo-Si12C12 are discussed. Finally, various long-range corrected density functionals, including those from the CAM-QTP family, are applied to a charge-transfer excitation in a cyclic (Si4C4)4 oligomer. Approaches for gauging the extent of charge-transfer character are also tested and EOMCC results are used to benchmark functionals and make recommendations.

On the hydrogen activation by frustrated Lewis pairs in the solid state: benchmark studies and theoretical insights.

Recently, the concept of small molecule activation by frustrated Lewis pairs (FLPs) has been expanded to the solid state showing a variety of interesting reactivities. Therefore, there is a need to establish a computational protocol to investigate such systems theoretically. In the present study, we selected several FLPs and applied multiple levels of theory, ranging from a semi-empirical tight-binding Hamiltonian to dispersion corrected hybrid density functionals. Their performance is benchmarked for the computation of crystal geometries, thermostatistical contributions, and reaction energies. We show that the computationally efficient HF-3c method gives accurate crystal structures and is numerically stable and sufficiently fast for routine applications. This method also gives reliable values for the thermostatistical contributions to Gibbs free energies. The meta-generalized gradient approximated TPSS-D3 evaluated in a projector augmented plane wave basis set is able to produce sufficiently accurate reaction electronic energies. The established protocol is intended to support experimental studies and to predict new reactions in the emerging field of solid-state FLPs.This article is part of the themed issue 'Frustrated Lewis pair chemistry'.

Gauging the performance of some density functionals including dispersion and nonlocal corrections for relative energies of water 20-mers

Currently, development of density functional theory approximations and their benchmarking for accurately modeling different types of molecular interactions become a very active field of research. In this report, performance of the dispersion (D3) and nonlocal (NL) corrected density functionals has been compared with generalized energy-based fragmentation approach at the complete basis set limit for predicting the relative energies of 10 low-energy isomers of water nanoclusters (H2O)20 as an illustrative example of hydrogen bonded systems. Considering a variety of exchange-correlation density functionals in combination with D3 and NL corrections we find that the D3 based approximations outperform the functionals incorporating NL correction. It is also shown that the LC-ωPBE-D3 and rPW86PBE-NL functionals have the best trend from the viewpoint of the order of stabilities in water nanoclusters under study.

First Principle Modelling of Materials and Processes in Dye-Sensitized Photoanodes for Solar Energy and Solar Fuels

In the context of solar energy exploitation, dye-sensitized solar cells and dye-sensitized photoelectrosynthetic cells offer the promise of low-cost sunlight conversion and storage, respectively. In this perspective we discuss the main successes and limitations of modern computational methodologies, ranging from hybrid and long-range corrected density functionals, GW approaches and multi-reference perturbation theories, in describing the electronic and optical properties of isolated components and complex interfaces relevant to these devices. While computational modelling has had a crucial role in the development of the dye-sensitized solar cells technology, the theoretical characterization of the interface structure and interfacial processes in water splitting devices is still at its infancy, especially concerning the electron and hole transfer phenomena. Quantitative analysis of interfacial charge separation and recombination reactions in multiple metal-oxide/dye/catalyst heterointerfaces, thus, undoubtedly represents the compelling challenge in the field of modern computational material science.

Optimized Long-Range Corrected Density Functionals for Electronic and Optical Properties of Bare and Ligated CdSe Quantum Dots.

The reliable prediction of optical and fundamental gaps of finite size systems using density functional theory requires to account for the potential self-interaction error, which is notorious for degrading the description of charge transfer transitions. One solution is provided by parametrized long-range corrected functionals such as LC-BLYP, which can be tuned such as to describe certain properties of the particular system at hand. Here, bare and 3-mercaptoprotionic acid covered Cd33Se33 quantum dots are investigated using the optimally tuned LC-BLYP functional. The range separation parameter, which determines the switching on of the exact exchange contribution, is found to be 0.12 bohr-1 and 0.09 bohr-1 for the bare and covered quantum dot, respectively. It is shown that density functional optimization indeed yields optical and fundamental gaps and thus exciton binding energies, considerably different compared with standard functionals such as the popular PBE and B3LYP ones. This holds true, despite the well established fact that the leading transitions are localized on the quantum dot and do not show pronounced long-range charge transfer character.

Short- and long-range corrected hybrid density functionals with the D3 dispersion corrections.

We propose a short- and long-range corrected (SLC) hybrid scheme employing 100% Hartree-Fock exchange at both zero and infinite interelectronic distances, wherein three SLC hybrid density functionals with the D3 dispersion corrections (SLC-LDA-D3, SLC-PBE-D3, and SLC-B97-D3) are developed. SLC-PBE-D3 and SLC-B97-D3 are shown to be accurate for a very diverse range of applications, such as core ionization and excitation energies, thermochemistry, kinetics, noncovalent interactions, dissociation of symmetric radical cations, vertical ionization potentials, vertical electron affinities, fundamental gaps, and valence, Rydberg, and long-range charge-transfer excitation energies. Relative to ωB97X-D, SLC-B97-D3 provides significant improvement for core ionization and excitation energies and noticeable improvement for the self-interaction, asymptote, energy-gap, and charge-transfer problems, while performing similarly for thermochemistry, kinetics, and noncovalent interactions.