Corel Draw Research Articles

Results of Response Analysis Against the Use of Multimedia Comic Media Man Nusantara (MANTRA) for Civics Learning in Senior High Schools

With the lack of learning media, monotonous learning and misuse of cellphones during learning are the reasons for researchers to develop learning media based on PPKn multimedia in high school. The purpose of developing MANTRA media. To see the response of teachers and students to the MANTRA multimedia comic media.
 The research design used is research and development design. While the approach used is a quantitative approach, where in calculating the data using numbers. This study aims to determine the feasibility of the product developed by the researcher in the form of a multimedia comic insight into the archipelago (mantra). It is hoped that this research can provide benefits towards the development and advancement of science and information technology to support Civics learning in high school.
 The results in this study are in the form of multimedia comic videos (software) designed using the Corel Draw application in the form of MANTRA learning videos. To assess the feasibility of the product, three experts were validated, namely material, media and language experts who obtained an average score of 74% with a fairly valid category. Meanwhile, product trials to determine student and teacher responses to the developed media scored an average of 87.7% and 78.2% with a very high response to media category.

The shrinking toe sign in gout

ObjectiveTo describe the frequency, clinical presentation and understand the pathophysiology of toe shortenings during urate-lowering treatment (ULT) of gout, a feature we called the shrinking toe sign. MethodsSequential foot photographs and radiographs of 1141 consecutive gouty patients followed-up for at least 6 months under ULT were retrospectively scrutinized. Features from patients with toe shortenings were extracted from anonymized files. Tophi adjacent to the shortening sites were semi quantified on foot photographs and toe shortenings were measured on radiographs with the Corel draw software (Corel corporation, Canada). Measurement concordance was assessed by concordance correlation coefficients (CCC) and correlation between tophus scores and toe shortenings was analyzed by using linear model with a patient random effect. 97 patients who did not develop toe shortening during ULT were analyzed as controls. ResultsShrinking toes were observed in 10 patients (0.9%) with tophaceous gout at joints with baseline destructive arthropathy. The first and second toes and metatarsophalangeal joints were predominantly involved. The sign was observed after serum urate had been lowered below the 300 and 360 µmol/l targets, in 8 and 2 patients, respectively. Measured shortenings (CCC: 0.99) correlated (p < 10−4) with decreases in tophus score (CCC: 0.91). Sequential radiograph analysis revealed that toe shortening was mainly due to lytic bone collapse during articular tophus dissolution. Comparison with controls showed that the sign developed in severe gout and in joints with more severe erosion score at baseline. ConclusionThe shrinking toe appears as rare feature of severe tophaceous gout, triggered by dissolution of bone-replacing tophi. Our findings reinforce the need to treat gout early, before destruction of bone scaffold by extensive tophi, as MSU crystal dissolution by ULT may further weaken these areas and induce their collapse.

Pengembangan Keterampilan Santri melalui Pelatihan Desain Grafis di Syarif Hidayatullah Cyber Pesantren

Pesantren is a place to learn about religious knowledge, in the modern era students not only master religious knowledge but other skills must be mastered such as graphic design. These skills and abilities will be needed by students in the future, therefore one solution in helping these problems is the holding of graphic design training aimed at new students of Syarif Hidayatullah Cyber ​​Islamic Boarding School. The graphic design training activities carried out were focused on twibbon design training using Corel Draw X7. The implementation stage is the delivery of material, practice, and the last evaluation. The results achieved during the training can be seen from the enthusiasm of the students in participating in the training.

DESIGNING VISUAL COMMUNICATION MEDIA AS SUPPORTING CULINARY PROMOTION

Purwodadi City, Grobogan Regency has many interesting culinary tourism potentials to visit and try the uniqueness of its exotic culinary taste, but the lack of promotional media so that there are very few tourists who come, only at certain times culinary tourist attractions have many visitors. Based on these conditions, the author has the idea to create one of the media that can be used as promotional media, namely brochures, X-banners, and posters, with the hope of encouraging the public to promote culinary tourism in Purwodadi City, Grobogan Regency. The creation of this study project aims to host and develop ideas and ideas about the potential of culinary tourism in Purwodadi in printed visual communication media works in the form of brochures, X-banners, and posters as one of the promotional media for Purwodadi culinary tourism, Grobogan Regency. In his work, the author uses photography techniques combined with computer graphics. The images from the photos are then processed using the Adobe Photoshop and Corel Draw programs to be used as a printed visual communication media design in the form of brochures, X-banners, and posters

Sistem Informasi Penjualan Motor Bekas Berbasis Android Untuk Meningkatkan Penjualan di Mokascirebon.Com

Mokascirebon.com is a trusted showroom in Cirebon for buying and selling second hand motorcycle, where in the business of buying and selling second hand motorcycle, it requires a large amount of capital and must be able to turn in and out of the motorcycle quickly considering that the longer the motorcycle is sold, the price will be decreased, and also if the tax of motorcycle stocks are in due date, it will increase the capital costs which is needed. The length of time a motorcycle has been sold has many factors, including tight business competition, where all of them are competing to increase sales of their second hand motorcycle and also have a system that makes working faster and more precise. From those problems, an idea is emerged to increase the motorcycle sales by increasing the reach of promotional media on the Android platform and creating an Android based computerized system that is able to accelerate the internal work of the company. In designing this application using the waterfall method, where the stages are gathering needs, building and evaluating waterfall, coding, testing, evaluating the system until finally the system can be used. The programming language used is Java and also uses the Android Studio application to create the Android application. The database used is MySQL. The supporting tools used are Photoshop, Corel Draw and the Android Emulator. With this android based second hand motorcycle sales information system to Increase Sales at Mokascirebon.com, it is hoped that it will be able to increase sales of second hand motorcycle and to simplify and accelerate the company's internal work

Media Pembelajaran HUBANSUKA (Hubungan Antar Sudut Matematika) Berbasis Android

This research took place at SMP Negeri 5 Lawang One Roof regarding the android-based HUBANSUKA learning media (MATHEMATIC RELATIONSHIP). The purpose of this study was to determine the validity and feasibility of the android-based HUBANSUKA learning media (relationships between corners of mathematics). This study uses the ADDIE development model ( Analysis , Design , Development , and Evaluation ) and the sample of this research is the seventh grade students of SMP Negeri 5 Lawang, totaling 20 students. Data collection techniques in this study were media expert validation sheets, material expert validation sheets and mathematics teacher validation sheets. This adroid-based HUBANSUKA (relationships between Mathematical Angle) learning media uses Construc 2 Software with several supporting software such as Corel Draw and Ms Powerpoint . The selection of Software Construct 2 is based on its ease of use and no programming language. The results of this study were produced by the three validators, namely material experts 98%, media experts 88%, and mathematics teachers 83%, so the average percentage of the three validators was 89.67% with a very valid category. The results of the questionnaire responses of class VII students of SMP Negeri 5 Lawang Satu Atap obtained a percentage of 98.5% in the very good category. So it can be concluded that the adroid-based HUBANSUKA (Relationships between Mathematical Angles) learning media is very valid and suitable for use in SMP Negeri 5 Lawang Satu Atap.

T-shirt Design Training for the Young Generation in Banua Anyar by using Corel Draw

kreativitas dan peningkatkan softskill untuk pemuda, karena pada era milenial dan digital pada saat ini pemuda sangat membutuhkan softskill yang dapat membantu dalam mendapatkan pekerjaan atau membuka usaha. Pelatihan desain grafis untuk generasi muda yang perlu diberikan pelatihan desain grafis menggunakan aplikasi desain CorelDraw yang sering digunakan untuk mendesain pamplet, poster, kaos dan lain-lain sehingga mudah untuk diajarkan kepada para pemula. Perkembangan teknologi dan informasi semakin maju, dengan adanya perkembangan yang sangat cepat memberikan dampak yang besar terhadap semua aspek kehidupan. Untuk memanfaatkan kondisi perkembangan teknologi dan informasi saat ini dengan mengasah dan meningkatkan softskill generasi muda agar tidak ketinggalan dalam peluang-peluang kemajuan teknologi. Melalui desain ini juga mengajak generasi mud untuk mempromosikan Kota Banjarmasin yang menjadi daya Tarik dalam meningkatkan kebudayaan dan keunikan Kota Banjarmasin serta menumbuhkan rasa cinta generasi muda terhadap kebudayaan yang dimiliki Kota Banjarmasin.

Media Pembelajaran Video Animasi Organ Tubuh Manusia

Interactive video is a technology for sending electronic signals from a moving image that can describe information which in the process occurs 2-way communication between multimedia and users. This research started from the problems encountered, namely the number of elementary school students who still do not know and do not understand the human organs. The method used is the ADDIE method (Analysis, Design, Development, Implementation, Evaluation). The use of interactive video based on 2D animation is expected to attract students so they don't get bored while learning using video. The applications used to create these interactive learning videos are Corel Draw X7 for creating digital sketches and Adobe After Effects for editing digital sketches into a video. The results in this study are interactive learning videos about human organs. Learning videos can be used by students so that they can increase student interest in learning because there are 2D animations and interactions with users and can be used anytime and anywhere. So it can be concluded that this learning video received a very good response from students because it is effectively used when studying at school and at home. Respondents were taken as many as 50 students. The results of this study obtained an increase in student understanding from 40% of students or as many as 20 students to 76% or as many as 38 students. There was an increase of 36%.

The mapping of potential ground water using geoelectrical measurement of Schlumberger configuration method in Malata Village, Tana Righu Sub-District, West Sumba District, East Nusa Tenggara Province

This study aims to analyze rock units containing aquifers in the location of investigation using geoelectrical measurements with Schlumberger configuration method of the MC OHM 2115 Resistivity Meter. The estimation was carried out in 12 measurement points with the length of each path was 150 m. The data analysis of the measurement was implemented using IP2WIN software and Corel Draw X6 software. The results of the interpretation of the 12 measurement points indicated that there were 5 rock units, namely the resistivity 0 ≤ 2 Ohm m which is interpreted as clay. Resistivity 2, 5 ≤ 10 Ohm m as marl. Species resistivity 10.5 ≤ 20 Ohm m as marl limestone, while resistivity ≥ 20.5 Ohm m as reef limestone. The aquifer belongs in the reef limestone unit with a specific resistance of 20.5 ≤ 100 Ohm m which ends with an impermeable layer such as clay or semi impermeable such as marl. Based on the interpretation, it is concluded that along the measurement area there are aquifers with varying depths which can be optimized by means of drilling at points 01, 03, 04, 06, and 09. The location that has the thickest aquifer is point 04 (± 29.3 m) and 09 (± 38 m).

Floral Morphology and Chromosome Characteristics of Bamboo Orchid from Menoreh Hills, Kulonprogo

Purpose: One of the most common orchids in Menoreh Hills, Kulonprogo is bamboo orchids (Arundina). This genus has only one species but has a wide variety of flower phenotypic that spreads around the world. The aims of this research were to characterize the flower morphology and chromosome content of bamboo orchids from Menoreh, related to their taxonomic status. Research Method: Observation of morphological characters was carried out to assist the identification process of the bamboo orchid species. The squashing method is used in the preparation of bamboo orchid chromosomes. The results were analyzed with Image Raster 3.0, Corel Draw 11 and Ms. Excel 2010. Findings: Bamboo orchid from Menoreh, Kulonprogo is a flower with white sepals and petals, the tips of sepals are yellowish brown. Labellum is white, with a thin purple stripe on the edges, and the base is yellow. Chromosomes number 2n = 20, with the formula karyotype 2n = 2x = 20 = 16m + 4sm. Chromosomes’ absolute length is 0.55-1.64 μm and relative lengths 0.57-1.615 μm. Based on morphological characters, Menoreh's bamboo orchid has similarities with A. graminifolia, whereas based on chromosomes number and karyotype formula, it is different. Limitations: There are bamboo orchids with a wide variety of flowers around world. However, the sample collection is only limited to bamboo orchid in Purwosari village, Kulonprogo. Value: Menoreh's bamboo orchid has a potential to be a new variant from the A. graminifolia population, based on the differences in morphological and chromosomal characters.

New Normal After Education Game Design Pandemic Uses Approaches Agile Scrum Application of Finite State Machine (FSM) Method

Game is an application that infers human behavior into software, and players who play the game feel they are entering the game world. Games can be used as a medium for information and education. The current rise of Covid-19 requires every individual to implement health protocols in their daily life. This term is called new normal. New normal is a change in behavior to continue carrying out normal activities but with the addition of implementing health protocols to prevent Covid-19 transmission. Unfortunately, in everyday life, the application of the new normal is less effective so that in one area, new cases have emerged and the PSBB must be re-applied. The new normal themed educational game can be a fun information medium for the community, with the New Normal After Pandemic educational game, it is hoped that it can educate the public in implementing health protocol rules. This game was created using Construct 2 software because it is based on HTML 5 which is specifically for 2D platforms. 2D designs are created using Corel Draw X7, Easy Paint Tools SAI and Adobe Photoshop. The final result of this study is a game application that applies the FSM (Finite State Machine) control system design method in each level rule and uses the Agile Scrum system development method with a process of 2x sprint iterations

Analysis of soft tissue facial profiles of Chinese students at W.R. Supratman 1 and 2 high schools in Medan using linear and angular measurements

Background: Soft tissue analysis is essential in treatment planning to ensure proportional, balanced, and harmonious soft tissue at the end of treatment. Several factors influence the variations, such as age and gender. Soft tissue profile analysis is usually studied from a lateral view. Purpose: The study aimed to determine whether there were differences in the average values of linear and angular measurement of the soft tissue profiles of the middle and lower third of the face between Chinese males and females high school students using lateral photometry. Methods: The samples were 100 lateral photographs (50 male and 50 female) of Chinese high school students at W.R. Supratman 1 and 2 in Medan. All samples were collected based on the inclusion and exclusion criteria obtained from secondary data. The linear and angular measurements were measured using Software Corel Draw 2019 and analysed statistically using an independent t-test and the Mann-Whitney test. Results: The inferior facial third, length of the lower lip, and prominence of the upper lip were, on average, greater in males, whereas in the prominence of pogonion, nasolabial angles, and nasofrontal angles were greater, on average, for females. Conclusion: There were significant gender differences in Chinese high school students in the inferior facial third, length of the lower lip, prominence of the upper lip, nasolabial angle, and nasofrontal angle, whereas there is no significant difference between genders in the prominence of the pogonion.

Development of Learning Media for Acehnese Culture Picture Books to Get to Know Local Culture in Early Childhood

Indonesia has so much cultural diversity. Culture is Indonesia’s national identity. Every culture cannot be separated from the cultural values of society in ancient times. This study intends to look at the development of picture book learning media with the theme of Acehnese culture to stimulate children to get to know the local culture. This study is commonly referred to as Research and Development (R&amp;D). The type of data in this research and development consists of two types of data, qualitative data, and quantitative data. Researchers took qualitative data by conducting observation, interviews, and documentation for the quantitative data obtained from research respondents, including material experts, media experts, cultural experts, and users of learning media. The results of this study are: (1) The development of picture book media is designed using Corel Draw to design layouts, depict illustrations, smoothing using snape, printing and giving to content/material experts, media experts, and cultural experts to determine the feasibility of the designed media. (2) The results from the content experts get a percentage of 100%, media experts get a percentage of 96%, cultural experts get a percentage of 96%, small-scale trials are 3.9%, and large-scale trials are 4.6%. Finally, this research contributes to in-depth knowledge that picture book learning media with the theme of Acehnese culture can stimulate children to get to know the local culture.

Assessment of Information and Communications Technology Skills Possessed by Teachers in Technical Colleges of Kano State, Nigeria

Purpose: The main purpose of this study is to assess of information and communications technology skills possessed by technical teachers in technical colleges of Kano State, Nigeria. Approach/Methodology/Design: A descriptive survey research design was adopted for the study. The population of the study was 157 which consisted of 86 experienced and 71 inexperienced technical teachers of Technical Colleges in Kano State. The instrument used for data collection was a structured questionnaire titled: Assessment of Information and Communications Technology Skills Possession Question (AICTSPQ) developed by the researchers. The instrument was validated by three experts and a reliability coefficient of 0.78 was obtained using Cronbach Alpha reliability method. Mean and standard deviation was used to answer the research questions while z-test was used to test the null hypotheses at 0.05 level of significance. Findings: The finding of the study revealed that Technical teachers are unskillful in ICT operation such as MS excel, Photoshop, database, animation, forum and Corel draw; and have a low level of ICT utilization. Practical Implications: The findings of the study have implications for concerned authorities. The Government should provide ICT infrastructure in the State’s Technical Colleges in order to have conducive environment for teaching of the trade subjects and enforce integration by regular supervision among others. Originality/value: The technical teachers were unskilful in the following; MS excel, Photoshop, database, animation, forum and Corel draw, video conferencing, instructional game, interactive whiteboard and online teaching as the utilization of ICT facilities was low among technical teachers in Technical Colleges of Kano State.

MORPHOLOGICAL AND CHROMOSOMAL CHARACTERIZATION OF ORCHID Peristylus goodyeroides Lindl. FROM CURUG SETAWING, KULONPROGO

Peristylus goodyeroides is a terestrial orchid that scattered around Southeast Asia. Morphological characters of P. goodyeroides can vary, depending on the ecological factors and habitat. Cytological characters in the form of chromosome configurations can be used as a taxonomic tool for the process of identifying and understanding variations in taxa. The purpose of this study was to determine the morphological characters and chromosome configuration of the P. goodyeroides from Curug Setawing, Kulonprogo. The method used was morphological characterization and plant chromosome preparation by squash method with the main steps of fixation, maceration, staining and observation. Data were analyzed with the help of Image raster 3, Corel Draw X7, and Microsoft Excel 2013. P. goodyeroides from Curug Setawing has the morphological characters of root tubers, cylindrical stems, ovate leaf shape, convolutive leaf arrangement and creamy white flowers. The orchid has a number of chromosomes 2n = 10 with a karyotype formula of 2n = 2x = 8m + 2t. Metacentric chromosomes are found on chromosomes 1-8 and telocentric chromosomes 9-10. The absolute arm length of the chromosomes has a range of 2.03-3.44 μm, the relative arm length of the chromosomes is 2.21-3.32 μm, the length of the p arm is 1.13-1.58 μm and the q arm is 1.23-2.12 μm.

Pembekalan Kompetensi Siswa Mengikuti Uji Kompetensi Bidang Multimedia bagi Siswa SMKN 1 Payung

Technological developments are increasingly developing. This requires students to improve skills in the field of multimedia to assist in dealing with school competency tests. All students are expected to be able to take the test and are required to pass as one of the graduation requirements. In this pandemic era, learning activities were a little disrupted so that it demanded that the school provide maximum provision for students. SMKN 1 Payung students still do not understand how to apply multimedia. Based on the above problems, it is necessary to provide provision on multimedia so that students are ready to face school competency exams. Some applications that can be used as a tool for creating multimedia are the Corel Draw X7 application specifically for designing multimedia and Adobe Illustrator for creating animations. The method used in this provision is direct multimedia design practice. It is hoped that this debriefing activity can improve the abilities of all students in facing competency tests so that they can graduate on time.

The Correlation between Hypertropia and Head Tilt in Congenital Unilateral Superior Oblique Muscle Palsy.

Purpose:To evaluate the correlation between the angle of deviation in different gazes and the amount of head tilt in patients with congenital unilateral superior oblique muscle palsy (SOP).Methods:This case series study was performed on 20 consecutive SOP patients with head tilt. Based on the Bielschowsky three-step test, the angle of deviation was measured in different gazes. Furthermore, the hypertropia difference between the two lateral gazes (gaze difference) and the two head tilt sides (bilateral head tilt difference) was calculated. For measuring head tilt, close-up pictures from 40 cm with a habitual abnormal head position were captured and analyzed by the Corel Draw X7 software.Results:The mean age of patients was 13 ± 9 years (range, 2.5–31 years). The mean angle of hypertropia in ipsilateral and contralateral head tilt was 24.5 Δ ± 7.1 Δ and 6.5 Δ ± 4.2 Δ, respectively (P < 0.001), and in ipsilateral and contralateral lateral gaze positions, it was 8.2 Δ ± 5.5 Δ and 22.5 Δ ± 6.1 Δ, respectively (P < 0.001). The mean of bilateral head tilt hypertropia difference was 18 Δ ± 5.3 Δ and gaze hypertropia difference was 14.3 Δ ± 6.16 Δ. There was a positive correlation between bilateral head tilt hypertropia difference and the amount of head tilt (R = 0.609, R2 = 0.371, P = 0.004, the amount of head tilt = 0.39 × [Bilateral head tilt hypertropia difference] +1.77). The amount of head tilt also had a positive correlation with the gaze hypertropia difference (R = 0.492, R2 = 0.242, P = 0.028, the amount of head tilt = 0.27 × [gaze hypertropia difference] +4.81).Conclusion:In SOP patients, the amount of head tilt had a positive correlation with bilateral head tilt hypertropia difference and also gaze hypertropia difference.

Implementation of Scrum Methodology in the construction of the intelligent system Acerkte of Academic tutorials

This paper describes the automation of processes tutorials based on a feasibility study on the HEIs, just as agile SCRUM methodologies are implemented in the construction of Acerkte system that will strengthen the support of the student during his tutorial session, as well as manage and manage activities to optimize time and resources in the school, tutor-tutored for it, the web system is made up of 10 well defined in the Sprint Backlog and assigned priorities Sprints. For agile methodology which will allow deliveries to functional and developed with cutting-edge technologies applied to development as PHP 5.5 [6] [7], HTML 5, CSS3, jQuery Mobile, Phonegap, Corel Draw, Arrowchat, Bootstrap, Senchatouch.

МЕТОДИКА СОЗДАНИЯ АРТ-ОБЪЕКТА С ПРИМЕНЕНИЕМ ПРОГРАММНЫХ ПАКЕТОВ

Vector graphics and 3D modeling have opened up a wide range of perspectives for designers to create various art objects. The use of computer graphics greatly simplified the process of sketch creating, as it provided the ability to change, add colors, and edit entire groups of objects. 3D modeling made it possible to recreate products, taking into account the smallest details in a virtual environment, compose an interior, and perform animation of various processes. The research object is the computer programs Corel Draw and 3D max and their importance for the methodology of development and creation of art objects. As a result of the study, it was found that vector graphics and 3D modeling programs not only made it easier for designers to create art objects, but also made it possible to improve the level of design by changing the usual perception. According to the authors, software products influenced the development of design, which made it possible to create any objects in a virtual environment.

UPAYA PENANGGULANGAN TINDAK PIDANA PEMALSUAN PASPOR OLEH KEPOLISIAN DAERAH SUMATERA UTARA

The crime of falsification of the immigration documents, namely passports, is a crime that is detrimental to the state. Investigative actions to the decision to apply criminal sanctions are a series of results of immigration control activities. To maintain and ensure that all people who enter/leave from and to a country comply with all immigration provisions. The problems in this thesis are what are the forms and the modus operandi of the criminal act of passport forgery, how is the process of investigating of the perpetrators of the crime of passport forgery by the Regional Police of Sumatera Utara, how are the obstacles and the efforts to overcome the criminal act of passport forgery by the Regional Police of Sumatera Utara. What is the form and the modus operandi of the criminal act of passport forgery, How is the process of investigating the perpetrators of the criminal act of passport forgery by the Regional Police of Sumatera Utara, How are the obstacles and efforts to overcome the criminal act of counterfeiting passports by the Regional Police of Sumatera Utara. Based on the discussion, it can be concluded that the form and the modus operandi of the crime of passport forgery is by utilizing technological sophistication, namely the suspect uses Photoshop and Corel Draw programs to create images, which resemble the images in the original document. Criminal sanctions for perpetrators of the crime of passport counterfeiting are not only regulated in the Criminal Code. Criminal sanctions are also regulated in Article 126 of Law Number 6 of 2011 concerning Immigration. Efforts to overcome the crime of passport forgery are divided into two ways, namely preventive and repressive countermeasures. In terms of prevention, this is very closely related to the supervision of both tourists entering Indonesia or leaving the territory of Indonesia, and carrying out activities in the territory of Indonesia. Preventive countermeasures are countermeasures carried out in an effort to prevent or maintain the possibility of immigration crime in this case, namely the criminal act of misuse of immigration permits. Meanwhile, in this repressive response, it can be done by means of punishment and deportation. Keywords : Countermeasures, Criminal Act, Passport Forgery