Core DNA Barcode Research Articles

Differentiation of Centella asiatica (L.) Urb. from Hydrocotyle umbellata L. using the trnH-psbA region, species-specific bands and anisocytic stomata as markers for quality control of raw materials and their products

Centella asiatica (L.) Urb. has been confused with Hydrocotyle umbellata L. in Thailand. The plants grow in the same habitat and look alike, making H. umbellata a potential adulterant species for C. asiatica. This study aimed to (i) establish reference markers of authentic C. asiatica and H. umbellata using DNA barcoding, thin-layer chromatography (TLC) and microscopic methods and (ii) determine whether H. umbellata adulterants are present in C. asiatica products in Thailand. Ribulose-bisphosphate carboxylase (rbcL), maturase K (matK), internal transcribed spacer (ITS) and chloroplast intergenic spacer (trnH-psbA) were identified as core DNA barcode regions that can be used to differentiate C. asiatica and H. umbellata. The trnH-psbA region showed the highest nucleotide variation between C. asiatica and H. umbellata and had distinct amplicon sizes of approximately 506 and 398 bp, respectively. TLC analysis revealed three distinct bands at Rf 0.20, 0.30 and 0.32 that could be used to differentiate C. asiatica and H. umbellata. Anisocytic stomata were present only in C. asiatica and were purposed as a microscopic marker. The trnH-psbA amplicon, TLC species-specific markers and anisocytic stomata were utilized to examine six Bua Bok products traded in Thailand. Agarose gel electrophoresis showed PCR amplicons at approximately 500 bp, TLC showed species-specific bands at Rf 0.20, 0.30 and 0.32, and anisocytic stomata were found in all products, confirming that all tested products were C. asiatica. These markers will benefit the herbal industry and other end users by allowing the detection of the adulterant species H. umbellata in C. asiatica raw materials and products.

Differentiation of Cyanthillium cinereum, a smoking cessation herb, from its adulterant Emilia sonchifolia using macroscopic and microscopic examination, HPTLC profiles and DNA barcodes

Cyanthillium cinereum (L.) H.Rob. is one of the most popular herbal smoking cessation aids currently used in Thailand, and its adulteration with Emilia sonchifolia (L.) DC. is often found in the herbal market. Therefore, the quality of the raw material must be considered. This work aimed to integrate macro- and microscopic, chemical and genetic authentication strategies to differentiate C. cinereum raw material from its adulterant. Different morphological features between C. cinereum and E. sonchifolia were simply recognized at the leaf base. For microscopic characteristics, trichome and pappus features were different between the two plants. HPTLC profiles showed a distinct band that could be used to unambiguously differentiate C. cinereum from E. sonchifolia. Four triterpenoid compounds, β-amyrin, taraxasterol, lupeol, and betulin, were identified from the distinct HPTLC band of C. cinereum. The use of core DNA barcode regions; rbcL, matK, ITS and psbA-trnH provided species-level resolution to differentiate the two plants. Taken together, the integration of macroscopic and microscopic characterization, phytochemical analysis by HPTLC and DNA barcoding distinguished C. cinereum from E. sonchifolia. The signatures of C. cinereum obtained here can help manufacturers to increase the quality control of C. cinereum raw material in commercialized smoking cessation products.

Large scale genome skimming from herbarium material for accurate plant identification and phylogenomics

BackgroundHerbaria are valuable sources of extensive curated plant material that are now accessible to genetic studies because of advances in high-throughput, next-generation sequencing methods. As an applied assessment of large-scale recovery of plastid and ribosomal genome sequences from herbarium material for plant identification and phylogenomics, we sequenced 672 samples covering 21 families, 142 genera and 530 named and proposed named species. We explored the impact of parameters such as sample age, DNA concentration and quality, read depth and fragment length on plastid assembly error. We also tested the efficacy of DNA sequence information for identifying plant samples using 45 specimens recently collected in the Pilbara.ResultsGenome skimming was effective at producing genomic information at large scale. Substantial sequence information on the chloroplast genome was obtained from 96.1% of samples, and complete or near-complete sequences of the nuclear ribosomal RNA gene repeat were obtained from 93.3% of samples. We were able to extract sequences for the core DNA barcode regions rbcL and matK from 96 to 93.3% of samples, respectively. Read quality and DNA fragment length had significant effects on sequencing outcomes and error correction of reads proved essential. Assembly problems were specific to certain taxa with low GC and high repeat content (Goodenia, Scaevola, Cyperus, Bulbostylis, Fimbristylis) suggesting biological rather than technical explanations. The structure of related genomes was needed to guide the assembly of repeats that exceeded the read length. DNA-based matching proved highly effective and showed that the efficacy for species identification declined in the order cpDNA >> rDNA > matK >> rbcL.ConclusionsWe showed that a large-scale approach to genome sequencing using herbarium specimens produces high-quality complete cpDNA and rDNA sequences as a source of data for DNA barcoding and phylogenomics.

The use of DNA barcodes to estimate phylogenetic diversity in forest communities of southern China.

To elucidate potential ecological and evolutionary processes associated with the assembly of plant communities, there is now widespread use of estimates of phylogenetic diversity that are based on a variety of DNA barcode regions and phylogenetic construction methods. However, relatively few studies consider how estimates of phylogenetic diversity may be influenced by single DNA barcodes incorporated into a sequence matrix (conservative regions vs. hypervariable regions) and the use of a backbone family‐level phylogeny. Here, we use general linear mixed‐effects models to examine the influence of different combinations of core DNA barcodes (rbcL, matK, ITS, and ITS2) and phylogeny construction methods on a series of estimates of community phylogenetic diversity for two subtropical forest plots in Guangdong, southern China. We ask: (a) What are the relative influences of single DNA barcodes on estimates phylogenetic diversity metrics? and (b) What is the effect of using a backbone family‐level phylogeny to estimate topology‐based phylogenetic diversity metrics? The combination of more than one barcode (i.e., rbcL + matK + ITS) and the use of a backbone family‐level phylogeny provided the most parsimonious explanation of variation in estimates of phylogenetic diversity. The use of a backbone family‐level phylogeny showed a stronger effect on phylogenetic diversity metrics that are based on tree topology compared to those that are based on branch lengths. In addition, the variation in the estimates of phylogenetic diversity that was explained by the top‐rank models ranged from 0.1% to 31% and was dependent on the type of phylogenetic community structure metric. Our study underscores the importance of incorporating a multilocus DNA barcode and the use of a backbone family‐level phylogeny to infer phylogenetic diversity, where the type of DNA barcode employed and the phylogenetic construction method used can serve as a significant source of variation in estimates of phylogenetic community structure.

Plant core DNA barcode performance at a local scale: identification of the conifers of the state of Hidalgo, Mexico

DNA barcoding constitutes a fundamental tool for species identification, especially for highly diverse geographic regions. Here, we characterize and evaluate the plant core barcoding regions matK and rbcL to identify the 25 conifer species from the state of Hidalgo, Mexico, including 10 species in various threat categories. Sequence quality, linguistic complexity, and the presence of the barcode gap were estimated. Two methods were compared for successful species identification: BRONX (Barcode Recognition Obtained with Nucleotide eXposés) and the least inclusive clade. We generated 77 sequences for matK and 88 for rbcL. The matK region had higher haplotype diversity and nucleotide diversity (Π), including six indels. The analysis of 77 specimens with complete sequences (matK + rbcL) resulted in 21 nonspecies-specific unique haplotypes for the 25 conifer species. Higher sequence quality and linguistic complexity were observed in rbcL than in matK. Every diagnosable species had a barcode gap. Ninety-seven specimens were assigned unambiguously to family and genus, regardless of the marker or method employed. The analysis of matK with BRONX produced the highest species level identification success (44%). Despite the low specimen identification success at the specific level, it will be possible to establish local management, conservation, and monitoring projects for at least half of the threatened species even when specimens do not exhibit diagnostic morphological characters. The low divergence between closely related species may result from the slow rate of molecular evolution of the core barcoding markers or from hybridization or incomplete lineage sorting. Similar identification success is expected for groups with comparable life history traits under similar conditions as this study. A reduction in the geographic area will not necessarily translate into higher identification success, especially for high-diversity regions and centres of diversification.

Assessing <i>Clivia</i> taxonomy using the core DNA barcode regions, <i>matK</i> and <i>rbcLa</i>

Background: Clivia is a genus of the family Amaryllidaceae endemic to South Africa and Swaziland. Six species and one natural hybrid have been described. Some morphological traits overlap between some species, thus causing taxonomic confusion.Objectives: The discriminatory power of the core DNA barcodes (matK and rbcLa) was evaluated, and the current taxonomy of Clivia was assessed.Method: Seventy-four two-locus DNA barcodes from 4 to 18 specimens per species were generated.Results: The matK region had a higher mean intraspecific variation of 0.21 compared with the 0.02 of rbcLa. The two-locus barcodes have an aligned length of 1335 base pairs. Three species, Clivia mirabilis, Clivia nobilis and Clivia caulescens, are monophyletic in the Bayesian Inference (BI) cladogram. The remaining Clivia species (Clivia miniata, Clivia gardenii, Clivia robusta and their affinities) are paraphyletic. Clivia is divided into 17 haplogroups with those of C. mirabilis and C. nobilis being unique. Clivia caulescens has three haplotypes. The Clivia species from the north-eastern distribution range of the Eastern Cape and KwaZulu-Natal provinces have 11 haplogroups and no species-specific DNA barcodes. These groups have no correlation with the current taxonomy or geographical distribution.Conclusions: Only 37.33% of the species can be correctly identified with the ‘best match’ option in SpeciesIdentifier. Clivia mirabilis, C. nobilis and C. caulescens have unique DNA barcodes to identify them. Specimens from the Ngome area in KwaZulu-Natal have a unique DNA barcode, separating them from the rest of C. gardenii. A taxonomic revision is suggested.

Replacing Sanger with Next Generation Sequencing to improve coverage and quality of reference DNA barcodes for plants

We estimate the global BOLD Systems database holds core DNA barcodes (rbcL + matK) for about 15% of land plant species and that comprehensive species coverage is still many decades away. Interim performance of the resource is compromised by variable sequence overlap and modest information content within each barcode. Our model predicts that the proportion of species-unique barcodes reduces as the database grows and that ‘false’ species-unique barcodes remain >5% until the database is almost complete. We conclude the current rbcL + matK barcode is unfit for purpose. Genome skimming and supplementary barcodes could improve diagnostic power but would slow new barcode acquisition. We therefore present two novel Next Generation Sequencing protocols (with freeware) capable of accurate, massively parallel de novo assembly of high quality DNA barcodes of >1400 bp. We explore how these capabilities could enhance species diagnosis in the coming decades.

Ten years of barcoding at the African Centre for DNA Barcoding.

The African Centre for DNA Barcoding (ACDB) was established in 2005 as part of a global initiative to accurately and rapidly survey biodiversity using short DNA sequences. The mitochondrial cytochrome c oxidase 1 gene (CO1) was rapidly adopted as the de facto barcode for animals. Following the evaluation of several candidate loci for plants, the Plant Working Group of the Consortium for the Barcoding of Life in 2009 recommended that two plastid genes, rbcLa and matK, be adopted as core DNA barcodes for terrestrial plants. To date, numerous studies continue to test the discriminatory power of these markers across various plant lineages. Over the past decade, we at the ACDB have used these core DNA barcodes to generate a barcode library for southern Africa. To date, the ACDB has contributed more than 21 000 plant barcodes and over 3000 CO1 barcodes for animals to the Barcode of Life Database (BOLD). Building upon this effort, we at the ACDB have addressed questions related to community assembly, biogeography, phylogenetic diversification, and invasion biology. Collectively, our work demonstrates the diverse applications of DNA barcoding in ecology, systematics, evolutionary biology, and conservation.

Assessment of mangroves from Goa, west coast India using DNA barcode.

Mangroves are salt-tolerant forest ecosystems of tropical and subtropical intertidal regions. They are among most productive, diverse, biologically important ecosystem and inclined toward threatened system. Identification of mangrove species is of critical importance in conserving and utilizing biodiversity, which apparently hindered by a lack of taxonomic expertise. In recent years, DNA barcoding using plastid markers rbcL and matK has been suggested as an effective method to enrich traditional taxonomic expertise for rapid species identification and biodiversity inventories. In the present study, we performed assessment of available 14 mangrove species of Goa, west coast India based on core DNA barcode markers, rbcL and matK. PCR amplification success rate, intra- and inter-specific genetic distance variation and the correct identification percentage were taken into account to assess candidate barcode regions. PCR and sequence success rate were high in rbcL (97.7 %) and matK (95.5 %) region. The two candidate chloroplast barcoding regions (rbcL, matK) yielded barcode gaps. Our results clearly demonstrated that matK locus assigned highest correct identification rates (72.09 %) based on TaxonDNA Best Match criteria. The concatenated rbcL + matK loci were able to adequately discriminate all mangrove genera and species to some extent except those in Rhizophora, Sonneratia and Avicennia. Our study provides the first endorsement of the species resolution among mangroves using plastid genes with few exceptions. Our future work will be focused on evaluation of other barcode markers to delineate complete resolution of mangrove species and identification of putative hybrids.Electronic supplementary materialThe online version of this article (doi:10.1186/s40064-016-3191-4) contains supplementary material, which is available to authorized users.

Exposing the illegal trade in cycad species (Cycadophyta: Encephalartos) at two traditional medicine markets in South Africa using DNA barcoding.

Species in the cycad genus Encephalartos are listed in CITES Appendix I and as Threatened or Protected Species in terms of South Africa's National Environmental Management: Biodiversity Act (NEM:BA) of 2004. Despite regulations, illegal plant harvesting for medicinal trade has continued in South Africa and resulted in declines in cycad populations and even complete loss of sub-populations. Encephalartos is traded at traditional medicine markets in South Africa in the form of bark strips and stem sections; thus, determining the species traded presents a major challenge due to a lack of characteristic plant parts. Here, a case study is presented on the use of DNA barcoding to identify cycads sold at the Faraday and Warwick traditional medicine markets in Johannesburg and Durban, respectively. Market samples were sequenced for the core DNA barcodes (rbcLa and matK) as well as two additional regions: nrITS and trnH-psbA. The barcoding database for cycads at the University of Johannesburg was utilized to assign query samples to known species. Three approaches were followed: tree-based, similarity-based, and character-based (BRONX) methods. Market samples identified were Encephalartos ferox (Near Threatened), Encephalartos lebomboensis (Endangered), Encephalartos natalensis (Near Threatened), Encephalartos senticosus (Vulnerable), and Encephalartos villosus (Least Concern). Results from this study are crucial for making appropriate assessments and decisions on how to manage these markets.

Evaluation of the DNA barcodes in Dendrobium (Orchidaceae) from mainland Asia.

DNA barcoding has been proposed to be one of the most promising tools for accurate and rapid identification of taxa. However, few publications have evaluated the efficiency of DNA barcoding for the large genera of flowering plants. Dendrobium, one of the largest genera of flowering plants, contains many species that are important in horticulture, medicine and biodiversity conservation. Besides, Dendrobium is a notoriously difficult group to identify. DNA barcoding was expected to be a supplementary means for species identification, conservation and future studies in Dendrobium. We assessed the power of 11 candidate barcodes on the basis of 1,698 accessions of 184 Dendrobium species obtained primarily from mainland Asia. Our results indicated that five single barcodes, i.e., ITS, ITS2, matK, rbcL and trnH-psbA, can be easily amplified and sequenced with the currently established primers. Four barcodes, ITS, ITS2, ITS+matK, and ITS2+matK, have distinct barcoding gaps. ITS+matK was the optimal barcode based on all evaluation methods. Furthermore, the efficiency of ITS+matK was verified in four other large genera including Ficus, Lysimachia, Paphiopedilum, and Pedicularis in this study. Therefore, we tentatively recommend the combination of ITS+matK as a core DNA barcode for large flowering plant genera.

DNA barcoding for plants.

DNA barcoding uses specific regions of DNA in order to identify species. Initiatives are taking place around the world to generate DNA barcodes for all groups of living organisms and to make these data publically available in order to help understand, conserve, and utilize the world's biodiversity. For land plants the core DNA barcode markers are two sections of coding regions within the chloroplast, part of the genes, rbcL and matK. In order to create high quality databases, each plant that is DNA barcoded needs to have a herbarium voucher that accompanies the rbcL and matK DNA sequences. The quality of the DNA sequences, the primers used, and trace files should also be accessible to users of the data. Multiple individuals should be DNA barcoded for each species in order to check for errors and allow for intraspecific variation. The world's herbaria provide a rich resource of already preserved and identified material and these can be used for DNA barcoding as well as by collecting fresh samples from the wild. These protocols describe the whole DNA barcoding process, from the collection of plant material from the wild or from the herbarium, how to extract and amplify the DNA, and how to check the quality of the data after sequencing.

Incorporating trnH-psbA to the core DNA barcodes improves significantly species discrimination withinsouthern African Combretaceae.

Recent studies indicate that the discriminatory power of the core DNA barcodes (rbcLa + matK) for land plants may have been overestimated since their performance have been tested only on few closely related species. In this study we focused mainly on how the addition of complementary barcodes (nrITS and trnH-psbA) to the core barcodes will affect the performance of the core barcodes in discriminating closely related species from family to section levels. In general, we found that the core barcodes performed poorly compared to the various combinations tested. Using multiple criteria, we finally advocated for the use of the core + trnH-psbA as potential DNA barcode for the family Combretaceae at least in southern Africa. Our results also indicate that the success of DNA barcoding in discriminating closely related species may be related to evolutionary and possibly the biogeographic histories of the taxonomic group tested.

Efficacy of the core DNA barcodes in identifying processed and poorly conserved plant materials commonly used in South African traditional medicine.

Medicinal plants cover a broad range of taxa, which may be phylogenetically less related but morphologically very similar. Such morphological similarity between species may lead to misidentification and inappropriate use. Also the substitution of a medicinal plant by a cheaper alternative (e.g. other non-medicinal plant species), either due to misidentification, or deliberately to cheat consumers, is an issue of growing concern. In this study, we used DNA barcoding to identify commonly used medicinal plants in South Africa. Using the core plant barcodes, matK and rbcLa, obtained from processed and poorly conserved materials sold at the muthi traditional medicine market, we tested efficacy of the barcodes in species discrimination. Based on genetic divergence, PCR amplification efficiency and BLAST algorithm, we revealed varied discriminatory potentials for the DNA barcodes. In general, the barcodes exhibited high discriminatory power, indicating their effectiveness in verifying the identity of the most common plant species traded in South African medicinal markets. BLAST algorithm successfully matched 61% of the queries against a reference database, suggesting that most of the information supplied by sellers at traditional medicinal markets in South Africa is correct. Our findings reinforce the utility of DNA barcoding technique in limiting false identification that can harm public health.

A phylogenetic approach towards understanding the drivers of plant invasiveness on Robben Island, South Africa

Invasive plant species are a considerable threat to ecosystems globally and on islands in particular where species diversity can be relatively low. In this study, we examined the phylogenetic basis of invasion success on Robben Island in South Africa. The flora of the island was sampled extensively and the phylogeny of the local community was reconstructed using the two core DNA barcode regions, rbcLa and matK. By analysing the phylogenetic patterns of native and invasive floras at two different scales, we found that invasive alien species are more distantly related to native species, a confirmation of Darwin's naturalization hypothesis. However, this pattern also holds even for randomly generated communities, therefore discounting the explanatory power of Darwin's naturalization hypothesis as the unique driver of invasion success on the island. These findings suggest that the drivers of invasion success on the island may be linked to species traits rather than their evolutionary history alone, or to the combination thereof. This result also has implications for the invasion management programmes currently being implemented to rehabilitate the native diversity on Robben Island. © 2013 The Linnean Society of London, Botanical Journal of the Linnean Society, 2013, 172, 142–152.

Counterintuitive performance of core DNA barcodes within clades of southern African Combretaceae

Counterintuitive performance of core DNA barcodes within clades of southern African Combretaceae

Identification of ethnomedicinal plants (Rauvolfioideae: Apocynaceae) through DNA barcoding from northeast India.

Background:DNA barcode-based molecular characterization is in practice for plants, but yet lacks total agreement considering the selection of marker. Plant species of subfamily Rauvolfioideae have long been used as herbal medicine by the majority of tribal people in Northeast (NE) India and at present holds mass effect on the society. Hence, there is an urgent need of correct taxonomic inventorization vis-à-vis species level molecular characterization of important medicinal plants.Objective:To test the efficiency of matK in species delineation like DNA barcoding in Rauvolfiadae (Apocynaceae).Materials and Methods:In this study, the core DNA barcode matK and trnH-psbA sequences are examined for differentiation of selected ethnomedicinal plants of Apocynaceae. DNA from young leaves of selected species was isolated, and matK gene (~800 bp) and trnH-psbA spacer (~450 bp) of Chloroplast DNA was amplified for species level identification.Results:The ~758 bp matK sequence in comparison to the trnH-psbA showed easy amplification, alignment, and high level of discrimination value among the medicinal Rauvolfioidae species. Intergenic spacer trnH-psbA is also exhibited persistent problem in obtaining constant bidirectional sequences. Partial matK sequences exhibited 3 indels in multiple of 3 at 5 end. Evidently, generated matK sequences are clustered cohesively, with their conspecific Genbank sequences. However, repeat structures with AT-rich regions, possessing indels in multiple of 3, could be utilized as qualitative molecular markers in further studies both at the intra-specific and shallow inter-specific levels like the intergenic spacers of CpDNA.Conclusion:matK sequence information could help in correct species identification for medicinal plants of Rauvolfioideae.

Sampling Strategy and Potential Utility of Indels for DNA Barcoding of Closely Related Plant Species: A Case Study in Taxus

Although DNA barcoding has become a useful tool for species identification and biodiversity surveys in plant sciences, there remains little consensus concerning appropriate sampling strategies and the treatment of indels. To address these two issues, we sampled 39 populations for nine Taxus species across their entire ranges, with two to three individuals per population randomly sampled. We sequenced one core DNA barcode (matK) and three supplementary regions (trnH-psbA, trnL-trnF and ITS) for all samples to test the effects of sampling design and the utility of indels. Our results suggested that increasing sampling within-population did not change the clustering of individuals, and that meant within-population P-distances were zero for most populations in all regions. Based on the markers tested here, comparison of methods either including or excluding indels indicated that discrimination and nodal support of monophyletic groups were significantly increased when indels were included. Thus we concluded that one individual per population was adequate to represent the within-population variation in these species for DNA barcoding, and that intra-specific sampling was best focused on representing the entire ranges of certain taxa. We also found that indels occurring in the chloroplast trnL-trnF and trnH-psbA regions were informative to differentiate among for closely related taxa barcoding, and we proposed that indel-coding methods should be considered for use in future for closed related plant species DNA barcoding projects on or below generic level.

RbcL and matK earn two thumbs up as the core DNA barcode for ferns.

BackgroundDNA barcoding will revolutionize our understanding of fern ecology, most especially because the accurate identification of the independent but cryptic gametophyte phase of the fern's life history—an endeavor previously impossible—will finally be feasible. In this study, we assess the discriminatory power of the core plant DNA barcode (rbcL and matK), as well as alternatively proposed fern barcodes (trnH-psbA and trnL-F), across all major fern lineages. We also present plastid barcode data for two genera in the hyperdiverse polypod clade—Deparia (Woodsiaceae) and the Cheilanthes marginata group (currently being segregated as a new genus of Pteridaceae)—to further evaluate the resolving power of these loci.Principal FindingsOur results clearly demonstrate the value of matK data, previously unavailable in ferns because of difficulties in amplification due to a major rearrangement of the plastid genome. With its high sequence variation, matK complements rbcL to provide a two-locus barcode with strong resolving power. With sequence variation comparable to matK, trnL-F appears to be a suitable alternative barcode region in ferns, and perhaps should be added to the core barcode region if universal primer development for matK fails. In contrast, trnH-psbA shows dramatically reduced sequence variation for the majority of ferns. This is likely due to the translocation of this segment of the plastid genome into the inverted repeat regions, which are known to have a highly constrained substitution rate.ConclusionsOur study provides the first endorsement of the two-locus barcode (rbcL+matK) in ferns, and favors trnL-F over trnH-psbA as a potential back-up locus. Future work should focus on gathering more fern matK sequence data to facilitate universal primer development.

Identification of Fabaceae Plants Using the DNA BarcodematK

In this study, we tested the applicability of the core DNA barcode MATK for identifying species within the Fabaceae family. Based on an evaluation of genetic variation, DNA barcoding gaps, and species discrimination power, MATK is a useful barcode for Fabaceae species. Of 1355 plant samples collected from 1079 species belonging to 409 diverse genera, MATK precisely identified approximately 80 % and 96 % of them at the species and genus levels, respectively. Therefore, our research indicates that the MATK region is a valuable marker for plant species within Fabaceae.