Copper Oxide Particles Research Articles

Copper oxide/biopolymer nanocomposites: synthesis and applications, a comprehensive review

Copper oxide particles have a significant role in various fields due to their many properties like special shape, size, and high surface area. Due to their rarity and unique characteristics, such as their large surface area, paramagnetic nature, and ease of separation, Copper oxide nanoparticles have received the greatest attention. Chitosan, Guar Gum, Tamarind, Alginate, starch, cellulose, polysaccharide, etc. are examples of natural biopolymers that have proven to be excellent hosts for the creation of CuO nanoparticles. Long-established fabrication techniques for biopolymer-based CuO nanocomposites include co-precipitations, green synthesis, Solvent Casting Method, Alco thermal method, and Sol-Gel methods. Excellent biological characteristics of Copper oxide/biopolymer nanocomposites include their potent antibacterial activity against a variety of diseases as well as bacteria that are resistant to antibiotics. These characteristics have sparked the creation of numerous strategies with direct biological applications, including customized surfaces with antimicrobial effects, wound dressings, and modified textiles. This study aims to provide the very first biopolymer CuO nanoparticles to be reported in the previous ten years as well as its appealing methodology in diverse applications.

Integrating Cu+/Cu0 sites on porous nitrogen-doped carbon nanofibers for stable and efficient CO2 electroreduction to multicarbon products

The Cu+/Cu0 sites of copper-based catalysts are crucial for enhancing the production of multicarbon (C2+) products from electrochemical CO2 reduction reaction (eCO2RR). However, the unstable Cu+ and insufficient Cu+/Cu0 active sites lead to their limited selectivity and stability for C2+ production. Herein, we embedded copper oxide (CuOx) particles into porous nitrogen-doped carbon nanofibers (CuOx@PCNF) by pyrolysis of the electrospun fiber film containing ZIF-8 and Cu2O particles. The porous nitrogen-doped carbon nanofibers protected and dispersed Cu+ species, and its microporous structure enhanced the interaction between CuOx and reactants during eCO2RR. The obtained CuOx@PCNF created more effective and stable Cu+/Cu0 active sites. It showed a high Faradaic efficiency of 62.5% for C2+ products in H-cell, which was 2 times higher than that of bare CuOx (∼31.1%). Furthermore, it achieved a maximum Faradaic efficiency of 80.7% for C2+ products in flow cell. In situ characterization and density functional theory (DFT) calculation confirmed that the N-doped carbon layer protected Cu+ from electrochemical reduction and lowered the energy barrier for the dimerization of *CO. Stable and exposed Cu+/Cu0 active sites enhanced the enrichment of *CO and promoted the C–C coupling reaction on the catalyst surface, which facilitated the formation of C2+ products.

Study of the structural and optical properties of pure copper oxide and doped with zinc at fixed weight percentages

Through this research, the effect of doping with zinc ions on the structural and optical properties of copper oxide particles doped with zinc at certain weight percentages was study using Radiofrequency plasma deposition technology. X-ray diffraction (XRD) analyses and field emission scanning electron microscopy were used to ascertain the materials' characteristics. Ultraviolet and visible spectroscopy of pure and doped thin films was also perform to calculate the band gap and electrical conductivity It was discovered using the XRD readings that the pure copper particles saturated with zinc had a crystalline size. It changes as Zn concentration rises and is influenced by the CuO lattice's strain and dislocation density. The thin film samples have structures resembling irregular and cubic grains, as demonstrated by the FE-SEM pictures. After doping with Zn, their homogeneity increases and adopts a regular granular nature. The band gap was also calculated for pure CuO particles as well as those doped with certain percentages of Zn. It was note that the addition of Zn worked to reduce Band gap for CuO

Fabrication of temperature-regulated sorbitol/mannitol-doped copper oxides derived from a Cu complex and their photocatalytic properties

In this study, a series of composites containing copper oxide (CuxO) particles doped with sorbitol/mannitol, namely Cu/CuxO@C (x = 1 or 2), was successfully derived from a novel copper complex ([Cu(IPZ)2Cl2] (Cu-Complex), where IPZ = 4-Iodopyrazole) by pyrolysis method and exploiting the stability and modulation of the coordination sites of sorbitol/mannitol, which exhibited excellent photocatalytic properties. The results showed that Cu/CuxO@C possessed high efficiency in degrading rhodamine B (RhB), gentian violet (GV), methyl orange (MO) and Congo red (CR) dyes under UV irradiation, and the degradation effect was gradually enhanced with the increase of calcination temperature. The structural and chemical states of the materials were characterised in detail. Furthermore, the effects of experimental factors such as catalyst dose, solution pH, and inorganic anions on dye degradation efficiency were investigated. The photocatalytic mechanism study demonstrated that the primary oxygen-active substance was superoxide radical (·O2-). The electron transport hypothesis explains the effective separation of electrons and holes within a substance. The Cu/CuxO@C composite was regarded as a potential photocatalyst for dye wastewater treatment due to its high photocatalytic efficiency, reusability, and universality, offering a novel solution to environmental and energy issues.

Mechanical Properties of a Composition Based on Polyester Resin with Copper(I) Oxide Particles

Mechanical Properties of a Composition Based on Polyester Resin with Copper(I) Oxide Particles

The Potential of Wire Explosion in Nanoparticle Production in Terms of Reproducibility.

Aquasols produced by exploding copper wires represent complex systems in which identifying individual colloidal components poses challenges due to broad and multimodal size distributions and varying shares among oxidation states. To evaluate the reproducibility of copper wire explosion, the size distribution of metallic and oxidized colloidal components within the 10-300 nm diameter range was assessed. Classification of each individual particle into bins according to size and chemical composition was accomplished by reconstructing the recorded optical extinction spectra of three sols produced under identical conditions as the weighted sum of the extinction spectra of individual copper and copper-oxide particles, computed using Mie theory. Our spectrophotometry-based component analysis revealed differences in particle number concentrations of the mainly oxidized nanoparticles, corresponding to deviations observed in the ultraviolet portion of the extinction spectra. Notable uniformity was observed, however, in the number of metallic fine particles, consistent with agreement in spectral features in the visible range. Regarding mass concentration, practically no differences were observed among the three samples, with nano-to-fine ratios of copper particles agreeing within 0.45%. Despite the complex processes during explosion leading to limited reproducibility in the ratio of different copper oxidation states, very good reproducibility (54.2 ± 0.7%) was found when comparing the total copper content of the samples to the mass of the exploded copper wire.

Enhanced Fenton-like catalysis via interfacial regulation of g-C3N4 for efficient aromatic organic pollutant degradation

For the efficient degradation of organic pollutants with the goal of reducing the water environment pollution, we employed an alkaline hydrothermal treatment on primeval g-C3N4 to synthesize a hydroxyl-grafted g-C3N4 (CN-0.5) material, from which we engineered a novel Fenton-like catalyst, known as Cu–CN-0.5. The introduction of numerous hydroxyl functional groups allowed the CN-0.5 substrate to stably fix active copper oxide particles through surface complexation, resulting in a low Cu leaching rate during a Cu–CN-0.5 Fenton-like process. A sequence of characterization techniques and theoretical calculations uncovered that interfacial complexation induced charge redistribution on the Cu–CN-0.5 surface. Specifically, some of the π electrons in the tris-s-triazine units were transferred to the copper oxide particles along the newly formed chemical bonds (C(π)-O-Cu), forming a π-deficient area on the tris-s-triazine plane near the complexation site. In a typical Cu–CN-0.5 Fenton-like process, a stable π-π interaction was established due to the favorable positive-negative match of electrostatic potential between the aromatic pollutants and π-deficient areas, leading to a significant improvement in Cu–CN-0.5's adsorption capacity for aromatic pollutants. Furthermore, pollutants also delivered electrons to the Cu–CN-0.5 Fenton-like system via a “through-space” approach, which suppressed the futile oxidation of H2O2 in reducing the high-valent Cu2+ and significantly improved the generation efficiency of •OH with high oxidative capacity. As expected, Cu–CN-0.5 not only exhibited an efficient Fenton degradation for several typical aromatic organic pollutants, but also demonstrated both a low metal leaching rate (0.12 mg/L) and a H2O2 utilization rate exceeding 80%. The distinctive Fenton degradation mechanism substantiated the potential of the as-prepared material for effective wastewater treatment applications.

Biodegradation of a Polymer Composition Surface Based on ED-20 Epoxy Resin with Encapsulated Copper(I) Oxide Particles

Biodegradation of a Polymer Composition Surface Based on ED-20 Epoxy Resin with Encapsulated Copper(I) Oxide Particles

Enhanced inactivation of Escherichia coli through hydrogen peroxide decomposition assisted by nanoscale cupric oxide-decorated activated carbon

In this study, nanoscale cupric oxide-decorated activated carbon (nCuO@AC) was synthesized by impregnation-calcination and employed to assist the decomposition of H2O2 for effective sterilization with Escherichia coli as target bacteria. Characteristic technologies demonstrated that copper oxide particles of 50–100 nm were uniformly distributed on AC surface. Owing to electron transfer from hydroxyl and aldehyde to CuO on AC, surface-bonded Cu(II) was partially reduced to Cu(I) in the nCuO matrix. The resultant Cu(I) expedited the decomposition of H2O2 and converted it into ·OH radicals which were identified by quenching experiment and electron paramagnetic resonance test. Due to oxidation attack of generated ·OH, the nCuO@AC-H2O2 system achieved a much higher inactivation rate of 6.0 log within 30 min as compared to those of 2.1 and 1.3 log in the nCuO@AC and nCuO-H2O2 systems. It also exhibited excellent pH adaptability and high inactivation efficiency under neutral conditions. After four cycles, the nCuO@AC-H2O2 system could still inactivate 5.5 log bacteria, indicating excellent stability and reusability of nCuO@AC. Spent nCuO@AC could be regenerated by eluting surficial copper oxides with hydrochloric acid, and re-coating nCuO particles through impregnation-calcination with a regeneration rate of 96.6%. Our results demonstrated that nCuO@AC was an efficient and prospective catalyst to assist the decomposition of H2O2 for effective inactivation of bacteria in water.

Apatite-Forming Ability and Visible Light-Enhanced Antibacterial Activity of CuO-Supported TiO2 Formed on Titanium by Chemical and Thermal Treatments.

Titanium with apatite-forming ability as well as antibacterial activity is useful as a component of antibacterial dental implants. When Ti was subjected to hydrogen peroxide (H2O2), copper acetate (Cu(OAc)2), and heat (H2O2-Cu(OAc)2-heat) treatments, a network structure of anatase and rutile titanium dioxide (TiO2) and fine copper oxide (CuO) particles was formed on the Ti surface. The resulting samples accumulated a dense and uniform apatite layer on the surface when incubated in simulated body fluid and showed enhanced antibacterial activity against Escherichia coli and Staphylococcus aureus under visible-light irradiation. Electron spin resonance spectra of H2O2-Cu(OAc)2-heat-treated samples showed that hydroxyl radicals (·OH) were generated from the samples, and the concentration of ·OH increased with increasing Cu concentration of the Cu(OAc)2 solution. The enhanced antibacterial activity of these samples under visible-light irradiation may be attributable to the generation of ·OH from samples. These results suggest that Ti implants obtained using H2O2-Cu(OAc)2-heat treatments and subjected to regular or on-demand visible-light irradiation may provide a decreased risk of peri-implantitis.

Механические свойства композиции на основе полиэфирной смолы с частицами оксида меди (I)

The mechanical properties of polyester resin composition with copper (I) oxide dispersed filler particles (non capsulated, capsulated by polylactide, and dissolved by the resin components) are considered in that paper. It was showing that a capsulated filler particle has better interaction with polymer matrix than non capsulated particles. So, the tensile strength and hardness of PCM are increasing, but ultimate deformation is decreasing. The strength characteristics of PCM with partial dissolution of copper (I) oxide particles by the components of the polyester resin was decrease. The density of the polymer binder network due to the loss of styrene, as well as the formation of complexes of copper salts are the cause of strength characteristics decrease.

The Influence of Copper Oxide Particle Size on the Properties of Epoxy Resin

This study examines the relationship between the size of copper particles and the properties of epoxy resin. Epoxy resin is a type of thermosetting resin commonly used as a matrix in polymer matrix composite materials reinforced with glass or carbon fibers. As part of this study, three microscale and two nanoscale composite samples modified with copper oxide particles of varying sizes were produced. This study included mechanical property tests such as static tensile tests, static bending tests, and impact tests. The results of the strength tests were compared to modeling results. Additionally, an accelerated thermal aging process was conducted to determine the impact of external conditions on the behavior of the produced composites. This study concluded with an analysis of thermal conductivity. The test results revealed that the size of the copper particles significantly impacted the tested properties. The composites with copper oxide particles on the nanoscale demonstrated the best results. These composites have promising applications in the automotive and aviation industries due to their strength, resistance to external factors, and increased thermal conductivity, suggesting their potential for producing materials that effectively dissipate heat.

Study Mechanical Properties for Polymer Composite Reinforced by Carbon Fibers and Copper Oxide Particles (CuO) Used in Make Prosthetic Limb

Study Mechanical Properties for Polymer Composite Reinforced by Carbon Fibers and Copper Oxide Particles (CuO) Used in Make Prosthetic Limb

Epoxy resin mechanical properties in composition with copper (I) oxide particles, encapsulated by polylactide with variable thickness

The required functional and mechanical properties are necessary for design the polymer compositions with dispersed fillers. The mechanical properties of such polymer composition can be changed by encapsulated filler particles shell thickness varying. The paper shows that the presence of polylactide polymer shell and its thickness on the surfaces of copper (I) oxide particles significantly affect the strength of polymer composite material based on ED-20 epoxy resin. That is due to the interaction between encapsulated particles and the matrix polymer, in contrast to noncapsulated particles. In addition, a change in particle size due to increasing shell thickness also affects the strength properties of the composition. It is shown that the elastic modulus of the filled epoxy composite does not depend on the shell thickness on the particle surfaces.

Green Synthesis of CuO Nanoparticles from Blackberry Leaves Extract (Rubus fruticosus) and Experimental Research of Its Effects on Emissions Analysis for IC Engines

As an additive for diesel engines, copper oxide nanoparticles (CuONPs) are thought to offer a lot of promise. In this work, an experimental investigation was conducted to ascertain the impact on a diesel engine of adding copper oxide (CuO) particles made from a Rubus fruticosus leaf extract product using a novel green synthesis approach. The presence and morphology of the CuO were analyzed by different characterization studies. Subsequently, was investigated the effects of the addition of CuONPs at two concentrations (15 and 20 ppm) on diesel engine performance, brake‐specific fuel consumption (BSFC), carbon monoxide (CO), hydrocarbon (HC), nitrogen oxide (NOX), and smoke emissions. From the experimental outcomes, the D100 + 20 ppm CuO blend shows a significant reduction in CO, HC, and smoke emissions by 58.19%, 25.15%, and 26.67%, respectively, when compared with standard diesel. Also, it was found that the D100 + 20 ppm CuO blend showed better engine performance with enhanced combustion characteristics. The experimental results provided a reduction of around 1.10% in BSFC. This study demonstrates how changes in fuel composition through the addition of nanoparticles to commonly used diesel fuel can provide meaningful improvements in engine performance and emissions.

Effect of Nystatin Coated Copper Oxide (CuO) Particles on Mechanical, Thermal, and Antifungal Properties of Polymethyl Methacrylate (PMMA)–Based Denture Materials

Polymethyl methacrylate (PMMA) has garnered significant attention in the field of dentistry due to its wide applications. This paper proposes the incorporation of the nystatin coated copper oxide (CuO) particles having desirable conductivity and antifungal properties, as a filler in the PMMA denture to address their low thermal conductivity, low impact strength, low fatigue resistance, and microbial adhesion. The prepared nystatin coated CuO particles were characterized with several analytical techniques. The nystatin coated CuO particles were mixed in different ratios (0%, 1%, 2%, and 4%) in PMMA corresponding to groups C, E1, E2, and E3, respectively. The prepared samples of composite PMMA with nystatin coated CuO were evaluated to determine their transverse strength, impact strength, Vickers hardness (HV), and thermal conductivity. Furthermore, antifungal properties of CuO particles, nystatin coated CuO particles, and their acrylic composites were evaluated against Candida albicans. Scanning electron microscopy (SEM) analysis confirmed the particles’ spherical and irregular shapes. The particle sizes range from nano to micron level. Fourier‐transform infrared spectroscopy (FTIR) and energy dispersive X‐ray spectroscopy (EDX) analysis confirmed the coating of nystatin on CuO. X‐ray diffraction (XRD) analysis showed the diffraction patterns and planes of CuO monoclinic shape structure. The composite prepared to have higher values of HV (19.53 ± 0.65, 20.16 ± 0.37, and 21.11 ± 0.75, respectively) as compared to the control. The impact strength values were measured high at 14.12 ± 5.55 kJ/m2 for 2% containing nystatin coated CuO acrylic resins compared to control and other groups. The conductivity increased linearly with the addition of CuO particles. The addition of CuO particles causes a reduction in flexural strength as compared to the control group. As the concentration of nystatin coated CuO (1%, 2%, and 4%) in acrylic samples increased, the antifungal properties were improved. Thus, the incorporation of optimized concentrations of nystatin coated CuO particles in acrylic resin resulted in the improved mechanical, thermal, and antifungal properties.

Funkcionalizacija tekstilnih materijala korišćenjem premaza i pigmenata koji sadrže bakar

Copper is one of the most used industrial metals. Also, copper containing compounds have high importance in everyday life. The use of copper and its compounds for textile treatment and functionalization is possible by using a broad range of different methods; as e.g. electrodeposition, plasma deposition, spin-doping with copper containing pigment or dye applications using copper salts as mordants or complexing agents. This actual report focusses especially on the use of copper containing pigments applied as part of a coating or a print onto textile surfaces. A general introduction into different types of copper compounds is given. Examples are given for the application of coatings containing copper effect pigments, gold bronze, elemental copper pigments and copper oxide particles. Related to effect pigments, especially silver coated copper pigments are introduced. According to sol-gel applications for textile functionalization, the in-situ preparation of copper oxide nanoparticles on textile surfaces is discussed. Following an overview on possible functionalization as result of the copper application is given. Antimicrobial and antistatic properties are discussed and presented with examples. The determined effects in this field are significant but less compared to analogous functionalization using silver as functional compound. A view on optical modifications and realized UV-protective properties is given. Finally, it can be stated that copper containing materials can be helpful tools to functionalize textile materials and surfaces in a broad range.

Study on the effect of CuO influenced kenaf fiber reinforced epoxy composite – A novel material for secondary structural applications

This study investigates the effects of copper oxide (CuO) particles on the mechanical and thermal properties of kenaf fibre reinforced epoxy composites, suggesting a new material suitable for structural applications. Comprehensive tests, including Thermogravimetric Investigation (TGA), weakness testing, and Checking Electron Microscopy (SEM), were conducted to evaluate the performance enhancements provided by the incorporation of CuO. The TGA has revealed that CuO particles significantly enhance the thermal stability of the composites. Among the many tests, sample C (6g of CuO) has the highest thermal resistance, retaining 17% of its weight at 500°C, which is higher than the other tests. The fatigue testing demonstrated that the composites exhibited remarkable fatigue resistance, particularly Test C, which maintained a fatigue stress of 14 MPa even after 15,000 cycles, indicating superior durability under cyclic loading circumstances. The SEM study revealed detailed microstructural observations, showing a consistent distribution of CuO particles and strong bonding between the fibres and matrix, which enhance the mechanical performance and resistance to failure.

Salting-out/sacrificial template strategy for the preparation of hydrogels as efficient solar evaporators

Hydrogels have recently emerged as promising solar evaporators due to their exceptional high evaporation rates. However, the high costs and complexity associated with the conventional freezing-thawing processes pose challenges that hinder their widespread application in large-scale solar evaporation systems. Herein, we present the successful attempt to prepare hydrogel-based solar evaporators using a salting-out/sacrificial template strategy, where salt particles serve as both salting-out agents and sacrificial templates. Without the need for freezing processes, we successfully synthesized polyvinyl alcohol (PVA) hydrogels, incorporating copper oxide and antimony-doped tin oxide particles as solar absorbers. It is demonstrated that the salting-out (Hofmeister) effect enables the cross-linking of PVA polymeric chains, imparting significant mechanical strength and durability to the hydrogels. Meanwhile, the use of salt particles as sacrificial templates creates well-developed microchannels of 100–300 μm within the hydrogels, enabling rapid water delivery. These hydrogels exhibited a solar-weighted absorptivity of 93.4 % and achieved solar evaporation rates exceeding 3.0 kg m-2h−1 under one-sun illumination. Notably, their performance is comparable to that of state-of-the-art hydrogels prepared using freezing-thawing methods. As such, this proposed strategy holds great promise for the large-scale and cost-effective production of hydrogels as high-performance solar evaporators.

User-friendly platform for analysis of high mass intact proteins and glycopeptides by laser desorption/ionization-mass spectrometry based on copper oxide particles

Matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) based on micro/nanostructured materials with different natures has received increasing attention for the analysis of a wide variety of analytes. However, up to now, only a few studies have shown the application of simple platforms in MALDI-MS for the identification of intact proteins. The present work reports on the application of copper oxide particles (Cu2O PS), obtained by a greener route, in combination with low amounts of 2,5-dihydroxybenzoic acid (DHB) as a novel hybrid platform. The combined Cu2O PS@DHB matrix, containing only 2.5 mg mL−1 of particles and 10 mg mL−1 of DHB, was easily applicable in MALDI-MS without surface modification of target plates. Under optimal conditions, the analysis of intact proteins up to 150,000 Da was possible, including immunoglobulin G, bovine serum albumin, and cytochrome C with adequate spot-to-spot signal reproducibility (RSD < 10%). In addition, the analysis of glycopeptides from IgG digests was carried out to prove the multipurpose application of the Cu2O PS@DHB platform in the low m/z range (2500–3000 Da). From the obtained results, it can be concluded that the optical and surface properties of as-synthesized Cu2O PS are likely to be responsible for the superior performance of Cu2O PS@DHB in comparison with conventional matrices. In this sense, the proposed user-friendly methodology opens up the prospect for possible implementation in bioanalysis and diagnostic research.Graphical