Synthesis Of Copper Nanoparticles Research Articles

Green Synthesis of Antibacterial CuO Nanoparticles Based on the Synergy Between Cornu aspersum Snail Mucus and Ascorbic Acid

Many biologically active compounds have been identified in the mucus of the garden snail Cornu aspersum, which are effective in the treatment of several diseases such as cancer, ulcers, wounds, etc. The incorporation of these compounds into the green synthesis of copper nanoparticles (CuONPs-Muc) was demonstrated in our previous study. Based on the synergistic effect of two reducing agents—C. aspersum snail mucus and ascorbic acid (AsA)—on CuSO4.5H2O, which also act as stabilizers of the resulting compound, a new method for the “green” synthesis of CuONPs-Muc is presented. Using two reducing agents has several advantages, such as forming spherical nanoparticles with a diameter of about 150 nm and reducing the formation time of CuONPs-Muc to 3 h. Analyses by ultraviolet–visible spectroscopy (UV-Vis) and Fourier transform infrared spectroscopy (FT-IR) show the formation of CuONPs-Muc, composed of a mixture of copper and copper oxide. This was confirmed by scanning electron microscopy combined with energy-dispersive spectroscopy (SEM/EDS) and X-ray diffraction (XRD). Another important advantage of CuONPs obtained by the new method with two reducing agents is the stronger inhibitory effect on the bacterial growth of some Gram-positive and Gram-negative bacterial strains, compared to CuONPs-Muc prepared with only one reducing agent, i.e., a fraction of mucus with an MW > 20 kDa.

Versatile role of oleylamine in the controlled synthesis of copper nanoparticles with diverse morphologies.

Precise tuning of ligands and a comprehensive understanding of their roles and functionalities are crucial for the design of nanoparticles (NPs) with tailored properties. In this study, we present the synthesis of copper NPs with precise control over their shape and crystallinity, relying on the remarkable versatility of oleylamine (OLA) as both a solvent and a ligand. By adjusting the temperature, OLA enables the formation of cubic NPs under rapid heating, reflecting kinetic control, and octahedral NPs with slow heating, indicating thermodynamic control. XPS analysis of these NPs reveals that OLA's dual chemical functionality allows for the stabilization of cubic NP (100) facets through surface binding via its alkene group, while octahedral and quasi-spherical NPs are stabilized by OLA's attachment to (111) facets through its amine function. Besides, this study highlights how trioctyl phosphine oxide (TOPO) and trioctyl phosphine (TOP) contribute to controlling nucleus crystallinity at early synthesis stages, facilitating the selective formation of single-crystal particles or multiply twinned particles. OLA's dual role, as both solvent and ligand, enhances its ability to stabilize different crystalline facets, making it a powerful tool for synthesizing copper NPs with diverse and controlled morphologies. This versatility opens up possibilities for tailoring their catalytic properties to specific applications.

Pleurotus ostreatus Copper Nanoparticles: In Vitro and In Silico Evaluation of the Antioxidant, Antibacterial, and Antidiabetic Activities.

The rapid growth of nanotechnology has opened new frontiers in biomedical applications, particularly through the use of metal nanoparticles. This study explores the green synthesis of copper nanoparticles (CuNPs) using an aqueous extract of Pleurotus ostreatus (PO-CuNPs) and their characterization through UV-visible spectroscopy, FTIR, SEM, and EDAX. The synthesized PO-CuNPs demonstrated exceptional antioxidant activity, evident in hydrogen peroxide scavenging and phosphomolybdenum assays. Their antibacterial efficacy was significant against Bacillus subtilis (18 ±0.11mm inhibition zone) and moderate against other bacterial strains. The antidiabetic potential of PO-CuNPs was confirmed by α-amylase (82%) and β-glucosidase (86%) inhibition assays. Molecular docking studies revealed kaempferol (-9.0kcal) and quercetin (-9.2kcal) as potent α-amylase inhibitors, while myricetin (-8.4kcal) was most effective against β-glucosidase due to its favorable interactions. Despite high scores, rutin was excluded due to poor drug-likeliness, highlighting kaempferol and myricetin as promising antidiabetic agents. This research highlights the promising biomedical applications of P. ostreatus-based CuNPs, particularly in managing oxidative stress, microbial infections, and diabetes, showcasing their potential as eco-friendly therapeutic agents.

Biogenic Synthesis of Copper Nanoparticles from Curcuma caesia Leaves and its Characterisation for Potential Application Towards Agriculture

Biogenic Synthesis of Copper Nanoparticles from Curcuma caesia Leaves and its Characterisation for Potential Application Towards Agriculture

Enhancing Selectivity and Efficiency in Carbon Dioxide Reduction to C2 Products through Spatial Confinement of Copper Species

Carbon dioxide reduction reaction (CO2RR) into multi-carbon products such as ethylene and ethanol offers a promising avenue for both mitigating CO2 levels in the atmosphere and producing valuable chemicals. Techno-economic assessments indicate that achieving a current density of 300 mA/cm2 in CO2RR to C2+ products is crucial. Recently, we have made strides in enhancing both current density and selectivity through the utilization of flow systems and the implementation of spatial confinement strategies.Our approach involves synthesizing copper nanoparticles within carbon nanotubes (CNTs) to mitigate overpotential and enhance the selectivity of multi-carbon product formation. The confined environment within the CNTs serves to concentrate CO2RR intermediates, thereby promoting the activity and selectivity of the carbon dioxide reduction reaction. As a result, our composite catalyst demonstrates a Faradaic efficiency of 73.96% and a current density of 591.68 mA/cm2for C2 products at 800 mA/cm2.Further enhancing the activity of copper species, we design a tubular metal-organic-framework (MOF)-derived copper catalyst that generates copper nanoclusters within its structure, leveraging the spatial confinement effect to boost the activity and selectivity of CO2RR. This catalyst achieves a Faradaic efficiency of 71% and a current density of 710 mA/cm2 for C2 products at 1000 mA/cm2.Analysis of operando Raman spectra, reveals crucial intermediates generated during CO2RR, shedding light on mechanisms underlying overall catalytic activity improvements. Through these spatial confinement strategies, we aim to significantly reduce carbon dioxide, advance towards achieving net-zero emissions, and pave the way for the industrialization of CO2RR.

Antiviral potential of copper and titanium dioxide nanoparticles against H1N1, Adenovirus 40 and herpes simplex virus type-II

The rising incidence of viral illnesses like influenza (H1N1), human adenovirus (AdV) 40, and herpes simplex virus type 2 (HSV-II) seriously threatens public health, necessitating the development of potent antiviral medications. The main objective of this study was to evaluate the antiviral activity of synthesized copper nanoparticles (Cu-NPs) and titanium dioxide nanoparticles (TiO2-NPs) against the three mentioned viruses. Characterization of these compounds was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM) and UV–Vis spectroscopy techniques. The cytotoxicity and antiviral activity of viruses were investigated using the crystal violet technique. The main findings reveal that Cu-NPs had significant antiviral activity, especially against HSV-II, with an IC50 value of 20.449 μg/mL. However, this activity may be accompanied by marked cytotoxicity, indicated by a CC50 of 123.492 µg/mL, raising concerns about its safety for therapeutic use and its negative impact on human health. In contrast, TiO2-NPs show a more favorable safety profile, with a CC50 of 264.10 μg/mL, maintaining moderate antiviral activity against H1N1 and HSV-II, albeit with higher IC50 values compared to Cu-NPs. Based on these results, Cu-NPs and TiO2-NPs are both attractive candidates for the creation of new antiviral treatments, and more research into their mechanisms of action and their therapeutic uses is necessary.

Composition of Sodium Alginate Films Containing Copper Oxide Nanoparticles Synthesized Using Aqueous Extract of Turnera subulata Sm and Evaluation of Their Healing Potential In Vivo

ABSTRACTSodium alginate is used in wound care because of its hydrogel‐forming properties and ability to protect the wound. Copper nanoparticles have properties that inhibit the growth of microorganisms and mediate the production of essential biomolecules for the healing process, making them an excellent choice for constructing nanocomposites for wound treatment. This work aimed to synthesize copper nanoparticles using an aqueous extract of Turnera subulata Sm. and incorporate them into sodium alginate to obtain films with healing potential. The proposed system was characterized by ultraviolet–visible spectroscopy (UV–vis), Fourier‐transform infrared (FTIR), dynamic light scattering (DLS), atomic force microscopy (AFM), x‐ray crystallography, and biocompatibility verified by hemolysis test. The UV–vis analysis showed that CuO NPs absorb at 280 and 404 nm. The FTIR spectra revealed stretching and folding modes of the functional groups present in the aqueous extract of T. subulata responsible for the reduction/stabilization of the copper ion, as well as signals at 780 and 618 cm−1 originating from the CuO bond. Size estimation using DLS revealed 564.5 and 394.2 nm. AFM data showed that adding copper oxide nanoparticles (CuO NPs) changed alginate roughness, and surface imaging revealed a material with a uniform appearance. The hemolysis test showed hemocompatibility of CuO NPs at all tested concentrations. Histology showed that CuONP‐loaded alginate films accelerated the healing process.

A Review on Bioflocculant-Synthesized Copper Nanoparticles: Characterization and Application in Wastewater Treatment.

Copper nanoparticles (CuNPs) are tiny materials with special features such as high electric conductivity, catalytic activity, antimicrobial activity, and optical activity. Published reports demonstrate their utilization in various fields, including biomedical, agricultural, environmental, wastewater treatment, and sensor fields. CuNPs can be produced utilizing traditional procedures; nevertheless, such procedures have restrictions like excessive consumption of energy, low production yields, and the utilization of detrimental substances. Thus, the adoption of environmentally approachable "green" approaches for copper nanoparticle synthesis is gaining popularity. These approaches involve employing plants, bacteria, and fungi. Nonetheless, there is a scarcity of data regarding the application of microbial bioflocculants in the synthesis of copper NPs. Therefore, this review emphasizes copper NP production using microbial flocculants, which offer economic benefits and are sustainable and harmless. The review also provides a characterization of the synthesized copper nanoparticles, employing numerous analytical tools to determine their compositional, morphological, and topographical features. It focuses on scientific advances from January 2015 to December 2023 and emphasizes the use of synthesized copper NPs in wastewater treatment.

Copper Nanoparticles: Characterization, Synthesis, and Biological Activity - A Review.

Copper and copper-based nanoparticles, derived from the abundant and cost-effective copper metal, have garnered significant attention due to their unique properties and potential for various applications. Copper is a biogenic metal that is found in all kingdoms of life and has a variety of essential biological activities. Among the earliest metals that humanity has harvested and exploited, copper has played a crucial role in maintaining and advancing civilization since the beginning of time. The article provided sources that shed light on the synthesis, characteristics, and applications of copper and copper nanoparticles, highlighting their historical significance and diverse range of uses.

Copper nanoparticles biosynthesis by Priestia megaterium and its application as antibacterial and antitumor agents

The growth of material science and technology places high importance on creating better processes for synthesizing copper nanoparticles. Thus, an easy, ecological, and benign process for producing copper nanoparticles (CuNPs) has been developed using Priestia sp. bacteria utilizing a variety of low-cost agro-industrial wastes and byproducts. The biosynthesis of CuNPs was conducted using glucose medium and copper ions salt solution, then it was replaced by utilizing low-cost agro-industrial wastes. UV–visible spectroscopy, dynamic light scattering (DLS), X-ray diffraction (XRD), High-resolution transmission electron microscope (HR-TEM), Attenuated Total Reflectance and Fourier transform infrared (ATR-FTIR), and zeta potential were used to characterize the biosynthesized CuNPs. The cytotoxicity of CuNPs using Vero -CCL-81 cell lines, and antibacterial and antitumor properties using human colon epithelial colorectal adenocarcinoma Caco-2-HTB-37 cell lines were assessed. The UV–visible and DLS studies revealed CuNPs formation, with a maximum concentration of 6.19 ppm after 48 h, as indicated by a 0.58 Surface plasmon resonance (SPR) within 450 nm and 57.73 nm particle size. The 16S rRNA gene analysis revealed that Priestia sp. isolate is closely related to Priestia megaterium and has been deposited in the NCBI GenBank with accession number AMD 2024. The biosynthesis with various agro-industrial wastes indicated blackstrap sugar cane molasses being the most effective for reducing CuNPs size to 3.12 nm owing to various reducing and stabilizing active compounds. The CuNPs were free of contaminants, with a sphere-shaped structure and a cytotoxicity assessment with an IC50 of 367.27 μg/mL. The antibacterial activity exhibited by the most susceptible bacteria were Bacillus cereus ATCC 11788 and Staphylococcus aureus ATCC 6538 with inhibition zones of 26.0 mm and 28.0 mm, respectively. The antitumor effect showed an IC50 dose of 175.36 μg/mL. Based on the findings, the current work sought to lower product costs and provide a practical solution to the environmental contamination issues brought on by the buildup of agricultural wastes. In addition, the obtained CuNPs could be applied in many fields such as pharmaceuticals, water purification, and agricultural applications as future aspects.

Therapeutic Prospective of Synthesized Copper Nanoparticles using Hemidesmus indicus (R.Br.) on Lung Cancer cell Lines (A549) and its Antibacterial Effect against the Clinical Isolates

Therapeutic Prospective of Synthesized Copper Nanoparticles using Hemidesmus indicus (R.Br.) on Lung Cancer cell Lines (A549) and its Antibacterial Effect against the Clinical Isolates

Green Synthesis of Silver and Copper Nanoparticles Using Parthenium hysterophorus: Antibacterial, Antioxidant, and Anticancer Properties

AbstractNanoparticles (NPs) have gained attention for their unique properties and potential applications, particularly in medicine. This study aim to investigate the green synthesis of silver and copper nanoparticles (NPs) using Parthenium hestephorus extract and evaluate their biological activities. The synthesized NPs were characterized using various analytical techniques, such as UV‐Vis spectroscopy, which confirmed the successful synthesis of silver and copper nanoparticles, with characteristic absorption peaks observed at 450 nm and 580 nm, respectively. Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), scanning electron microscopy (SEM), and energy‐dispersive X‐ray spectroscopy (EDX) were also conducted. In antimicrobial evaluations, the silver and copper nanoparticles exhibited notable inhibitory zones ranging from 12–18 mm against Staphylococcus aureus and 27–30 mm against Escherichia coli bacteria. Furthermore, the nanoparticles’ potential as anticancer agents were tested on HepG2 human cancer cells using the MTT assay. The silver, copper nanoparticles, and control exhibited dose‐dependent cytotoxicity, with IC50 values of 35 μg/mL, 50 μg/ml, and 30 μg/ml, respectively, suggesting their promise in cancer treatment. Antioxidant activity was demonstrated through free radical scavenging assays, with silver and copper nanoparticles showing significant potential, inhibiting free radicals by 80 %, 70 %, and 90 %, respectively. It is concluded that the green synthesis of silver and copper nanoparticles using extract of Parthenium hestephorus presents an efficient and sustainable method for generating NPs with potent antibacterial, anticancer, and antioxidant capabilities.

Copper nanoparticles synthesis from Andrographis paniculata leaf extract– characterization and its application

Copper nanoparticle synthesis and characterization are now being done widely due to its broad nanotechnology research interest, especially in medical applications. The current work set out to produce copper nanoparticles(CuNPs) by employing the herb Andrographis paniculata for medicinal purposes. Andrographis paniculata leaf extract was used to make CuNPs using copper sulphate (CuSO4). For monitoring the synthesis of CuNPs, the UV-vis absorption spectra were obtained and Surface Plasmon resonance (SPR) peaks at 500nm. The X-ray diffraction (XRD) pattern reveals the average size of the crystallites is 5.876 nm. This environmentally friendly approach yields homogenous, spherical particles, as demonstrated by images of Scanning and Transmission electron microscopy (TEM and SEM). The outcomes demonstrated that leaf extract is most suited for producing CuNPs. It shows a greater zone of inhibition and inhibitory action against tested bacteria such as Bacillus cereus, Escherichia Coli, Klebsiella pneumoniae and Staphylococcus aureus, and it can be used for the inhibition of several harmful microbes. Because the synthesized CuNPs are non-toxic, environmentally benign, and suitable for usage in pharmaceutical and other fields, they can be applied in a variety of ways in future.

Effortless green synthesis of zero-valent copper nanoparticles

Effortless green synthesis of zero-valent copper nanoparticles

Synthesis of Luminescent Copper Nanoparticles Using Couroupita guianensis Flower Extract: Evaluation of Antibacterial and Anticancer Activities.

The biosynthesis of nanoparticles is a crucial research area aimed at developing innovative, cost-effective, and eco-friendly synthesis techniques for various applications. Herein, we synthesized copper oxide nanoparticles (CuNPs) using Couroupita guianensis flower extract via a simple green synthesis method. These green CuNPs demonstrate promising antimicrobial activity and anticancer activity against A549 nonsmall cell lung cancer (NSCLC) cells. We comprehensively characterized the CuNPs using UV spectrum, XRD, FTIR, SEM, and EDS analyses. The antibacterial and anticancerous performance is attributed to their spherical-like morphology, which enhances effective interaction with bacterial and cancer cells. Moreover, CuNPs proved effective in inactivating Escherichia coli, achieving 2%, 52%, and 99% inactivation at 0, 30, and 60 min, respectively, and Listeria monocytogenes, achieving 1%, 48%, and 98% inactivation at 0, 30, and 60 min, respectively, under visible light. Furthermore, the CuNPs exhibited significant anticancer activity against A549 NSCLC cells, achieving cell viability reductions of 10%, 30%, 50%, 70%, 83%, and 91% at concentrations of 25, 50, 100, 150, 200, and 250 μg/mL, respectively. The green synthesized CuNPs demonstrate their potential in biomedical applications.

Synthesis, Characterization and Influence of Copper Nanoparticles on Growth of Vigna mungo L. Hepper CO-7 Variety

The copper nanoparticle was synthesized by employing Cnidoscolus aconitifolius (Mill) leaf extract. The nanoparticles were characterized by UV, FTIR and SEM studies. The SEM image showed a spherical structure. The bio-stimulant effect of green synthesized copper nanoparticles on Vigna mungo L. Hepper was investigated. Seed germination, biochemical, antioxidant, and enzyme activities of the copper nanoparticles were studied. The germination and morphological characteristics were superior at 100 mg/L copper nanoparticle-treated seeds. The biochemical parameters such as chlorophyll (0.701±0.107 mg/g), carbohydrate (4.657±0.090 mg/g), protein (4.396±0.335 mg/g), amino acid (18.557±0.638 mg/g), phenol (10.824±0.53 mg/g), flavonoid (3.644±0.171 mg/g), alkaloid (6.529±0.45 mg/g), and tannin (12.159±0.218 mg/g) were higher at a nanoparticle concentration of 100 mg/L. As far as the enzymatic activities, the maximum activity of nitrate reductase (4.505±0.203 mg/g) and α-amylase (13.195±0.285 mg/g) were observed with 100 mg/L copper nanoparticle-treated seedlings. The in vitro antioxidant activities were also studied.

Synthesis and characterization of copper nanoparticle of Solanum Virginianum and Coccinia Grandis extract: A comparative study of thermal behavior

Synthesis and characterization of copper nanoparticle of Solanum Virginianum and Coccinia Grandis extract: A comparative study of thermal behavior

Carbon dioxide mixed air promoting plasma-driven nitrogen oxidation conversion

Utilization of plasma-driven direct nitrogen oxidation for the production of nitrates presents a promising strategy for realizing artificial nitrogen fixation while minimizing carbon emissions. However, the conventional plasma-driven synthesis method employing air as the feed gas exhibits unsatisfactory nitrogen conversion efficiency due to insufficient oxygen. In this study, we introduced carbon dioxide as an additional source of oxygen and mixed it with air, utilizing electrochemically synthesized copper nanoparticles as a catalyst, which significantly improved the efficiency of plasma-driven nitrogen oxidation. The introduction of carbon dioxide not only provides sufficient O* for the nitrogen oxidation process, but also facilitates the high-value conversion of carbon dioxide with 99.99% selectivity in the synthesis of carbon monoxide. Additionally, we also designed a cyclic reaction device to further enhance the nitrogen oxidation efficiency. As a result, this plasma-driven cycle reaction system achieved a maximum nitrogen conversion rate of up to 11.4%.

One‐Step Laser Synthesis of Copper Nanoparticles and Laser‐Induced Graphene in a Paper Substrate for Non‐Enzymatic Glucose Sensing

AbstractThe synergy resulting from the high conductivity of graphene and catalytic properties of metal nanoparticle has been a resource to improve the activity and functionality of electrochemical sensors. This work focuses on the simultaneous synthesis of copper nanoparticles (CuNPs) and laser‐induced graphene (LIG) derived from paper, through a one‐step laser processing approach. A chromatography paper substrate with drop‐casted copper sulfate is used for the fabrication of this hybrid material, characterized in terms of its morphological, chemical, and conductive properties. Appealing conductive properties are achieved, with sheet resistance of 170 Ω sq−1 being reached, while chemical characterization confirms the simultaneous synthesis of the conductive carbon electrode material and metallic copper nanostructures. Using optimized laser synthesis and patterning conditions, LIG/CuNPs‐based working electrodes are fabricated within a three‐electrode planar cell, and their electrochemical performance is assessed against pristine LIG electrodes, demonstrating good electron transfer kinetics appropriate for electrochemical sensing. The sensor's ability to detect glucose through a non‐enzymatic route is optimized, to assure good sensing performance in standard samples and in artificial sweat complex matrix.

Green synthesis of copper nanoparticles from Terminalia arjuna (L.) bark extract: Characterization and potential for mercury degradation

The focus of this study is on synthesizing copper nanoparticles through a green approach, utilizing Terminalia arjuna bark extract. The ultra violet (UV) spectral analysis of copper nanoparticles synthesized through environmentally friendly methods revealed distinct absorption peaks at 287 nm, 575 nm, and 898 nm, indicative of significant light absorption. These peaks elucidate the nanoparticles' optical characteristics, shedding light on electronic transitions and surface plasmon resonance phenomena. Fourier transform infrared spectroscopy (FTIR) analysis displayed various peaks, suggesting vibrations associated with copper nanoparticles and functional groups in T. arjuna bark extract. The X-ray diffraction analysis (XRD) data exhibited characteristic peaks corresponding to metallic copper's crystallographic planes, confirming the formation of highly crystalline copper nanoparticles. Atomic force microscopy results depicted surface morphology and particle size distribution. Copper nanoparticles show promise in mercury degradation due to their high surface area and catalytic activity. They interact effectively with mercury ions through adsorption, reduction, and oxidation processes, leading to sequestration or transformation into less toxic forms. Functionalization enhances their affinity towards mercury, while synergies with other nanomaterials boost efficiency. Green synthesized copper nanoparticles offer an eco-friendly solution for effective mercury remediation, promising advancements in sustainable nanotechnological approaches for global environmental sustainability. KEY WORDS: Mercury, Copper, Terminalia arjuna, Remediation Bull. Chem. Soc. Ethiop. 2024, 38(6), 1703-1713. DOI: https://dx.doi.org/10.4314/bcse.v38i6.16