Coordination Sphere Research Articles

Modulating Ti coordination environment in Ti-containing materials by sulfation for synergizing with Au sites to facilitate propylene epoxidation

Modulating the coordination environment of Ti sites in Ti-containing materials to synergize with Au sites is a crucial issue to boost the process of propylene epoxidation with H2 and O2 to produce propylene oxide (i.e., HOPO), but still remains a great challenge. Herein, we report a facile strategy to tailor the coordination states and electronic properties of Ti sites. The sulfur-decorated Ti-SiO2 (i.e., Ti sites anchored onto silica) with moderate sulfur loading (Ti-SiO2-S-M) can synergize well with Au sites for the HOPO process with high activity, propylene oxide (PO) selectivity, and H2 efficiency, which are superior to those achieved on the referenced Ti-SiO2 synergizing with Au sites. Multiple characterizations, in-situ diffuse reflectance infrared Fourier transform spectroscopy of propylene and PO, PO conversion experiment, and kinetics behaviors demonstrate that the superior advantages of Ti-SiO2-S-M against Ti-SiO2 result from the increased Ti binding energy, improved hydrophobicity, and weakened acidity, which simultaneously facilitate the adsorption of propylene and promote the desorption of PO. This insight reported here could guide the rational design and optimization of Ti-containing materials to synergize with Au catalysts for propylene epoxidation.

Engineering the Coordination Environment in the Silver(I)- and Ruthenium(II)-N-Heterocyclic Carbene Complexes in Instigating the Electrocatalytic Hydrogen Evolution Reaction.

The quest for cost-efficient and high-performance electrocatalysts towards electrocatalytic water splitting is a key and an interdisciplinary area of study. Considerable progress is being driven by developments in the field of energy research. In a fundamental study, we have synthesized NHC precursors (6 and 7) and corresponding metal-NHC complexes of silver(I)- (8 and 9) and ruthenium(II)- (10 and 11) of a N-heterocyclic carbene-based ligand type incorporating coumarins. These NHC precursors and metal-NHC complexes were characterized through various analytical and spectral techniques. The silver(I)-NHC complexes 8 and 9 displayed a linear coordination geometry with a center of inversion, which is evidenced by the single-crystal X-ray diffraction technique. Both the series of complexes were assessed for their efficacies in the hydrogen evolution reaction (HER). The results demonstrated that attributed to its peculiar coordination geometry, high electrical conductivity the silver(I)- and ruthenium(II)-NHC complexes exhibited exemplary electrocatalytic activity. Activities of the hydrogen evolution reaction on two differently modified electrode substrates with metal-NHC complexes have been studied. To attain the benchmark HER current density of 10 mA cm-2, in 1.0 M KOH, an overpotential of -375 to -527 mV vs RHE was required for the metal-NHC complexes. Based on the analysis of the Tafel slope values, the rate-determining step was the adsorption of hydrogen as investigated in the potential window. The molecular electrocatalyst 10 presented a superior stability and maintained the electrocatalytic activity for a duration of 18 h with complex 8 and 24 h with respect to complex 10 in 1.0 M KOH. Apace with these studies, hydrogen oxidation studies were examined in 0.5 M H2SO4 by a substantial current density at the platinum ring electrode. This research offers feasible guidance for developing organometallic-based molecular electrocatalysts with good electrocatalytic performance.

Structural, Antioxidant, and Protein/DNA-Binding Properties of Sulfate-Coordinated Ni(II) Complex with Pyridoxal-Semicarbazone (PLSC) Ligand

The pyridoxal-semicarbazone (PLSC) ligand and its transition metal complexes have shown significant biological activity. In this contribution, a novel nickel(II)-PLSC complex, [Ni(PLSC)(SO4)(H2O)2], was obtained, and its structure was determined by X-ray crystallographic analysis, FTIR, and UV-VIS spectroscopy. The sulfate ion is directly coordinated to the central metal ion. The intermolecular stabilization interactions were examined using Hirshfeld surface analysis. The crystal structure was optimized by a B3LYP functional using two pseudopotentials for nickel(II) (LanL2DZ and def2-TZVP) together with a 6-311++G(d,p) basis set for non-metallic atoms. The experimental and theoretical bond lengths and angles were compared, and the appropriate level of theory was determined. The stabilization interactions within the coordination sphere were investigated by the Quantum Theory of Atoms in Molecules (QTAIM). The antioxidant activity towards hydroxyl and ascorbyl radicals was measured by EPR spectroscopy. The interactions between Human Serum Albumin (HSA) and the complex were examined by spectrofluorimetric titration and a molecular docking study. The mechanism of binding to DNA was analyzed by complex fluorescence quenching, potassium iodide quenching, and ethidium bromide displacement studies in conjunction with molecular docking simulations.

Designing V Single Atom Embedded Carbon Moiety for the Electrocatalytic Nitrogen Reduction Reaction by First Principles Study.

Development of an efficient electrocatalyst for the nitrogen reduction reaction (NRR) to serve as a sustainable alternative to the Haber-Bosch process has proven highly challenging. Single atom catalysts (SACs), which have the maximum atom utilization efficiency, are among the most promising candidates. Single atoms can be incorporated to a catalytic system by doping or substitution or by attaching a molecular coordination complex to a substrate and the different insertion modes allow the chemical environment to be varied. We have used DFT to investigate vanadium SACS for NRR activity with a focus on varying the coordination environment of the V atom. Phthalocyanine, porphyrin and graphene like coordination environments with varying N-coordination have been studied. Vanadium phthalocyanine (VphN4) is the most promising of the investigated systems. It features high selectivity relative the HER reaction and relatively strong binding of N2 relatively H, which prevents poisoning of the surface by hydrogen. VphN4 also has the lowest overpotential among the studied systems. The electrocatalytic properties of VphN4 deposited as a monolayer on the Ag (111) surface have been investigated. This system, which already has been prepared, shows promising properties for use as a catalytic electrode for the NRR reaction.

Monodentate Ligands in X-Cu(I)-Y Complexes—Structural Aspects

This structural study examines over 102 coordinate Cu(I) complexes with compositions such as C-Cu-Y (Y=HL, OL, NL, SL, SiL, BL, PL, Cl, Br, I, AlL, or SnL), N-Cu-Y (Y=OL, Cl), S-Cu-Y (Y=Cl, Br, I), P-Cu-Y (Y=Cl, I), and Se-Cu-Y (Y=Br, I). These complexes crystallize into three different crystal classes: monoclinic (seventy-two instances), triclinic (twenty-eight instances), and orthorhombic (eight instances). The Cu-L bond length increases with the covalent radius of the ligating atom. There are two possible geometries for coordination number two: linear and bent. A total of 21 varieties of inner coordination spheres exist, categorized into two hetero-types (C-Cu-Y, i.e., organometallic compounds and X-Cu-Y, i.e., coordination compounds). The structural parameters of hetero Cu(I) complexes were compared with trans-X-Cu (I)-X (homo) complexes and analyzed. The maximum deviations from linearity (180.0°) are, on average, 10.3° for Br-Cu(I)-Br, 16.6° for C-Cu(I)-Sn, and 35.5° for P-Cu(I)-I. These results indicate that ligand properties influence deviation from linearity, increasing in the order of hard < borderline < soft.

Hydrogen Bond Donors in the Catalytic Pocket: The Case of the Ring-Opening Polymerization of Cyclic Esters Catalyzed by an Amino-Propoxide Aluminum Complex

A new aluminum complex (NSO)AlMe2 featuring a hydrogen bond donor on the ligand backbone has been synthesized via the reaction of AlMe3 with 1-((2-(isopropylamino)phenyl)thio)propan-2-ol (NSO-H) and spectroscopically characterized. In the complex, the aluminum atom is in a distorted tetrahedral coordination sphere determined by the anionic oxygen and neutral nitrogen atoms of the ligand and by the two carbon atoms of the alkyl groups. After proper activation, the complex (NSO)AlMe2 was able to promote the ring-opening polymerization of L-, rac-lactide, ε-caprolactone and rac-β-butyrolactone. The polymerization of rac-lactide was faster than that of L-lactide: in a toluene solution at 80 °C, the high monomer conversion of 100 equivalents was achieved in 1.5 h, reaching a turnover frequency of 63 molLA·molAl–1·h–1. The experimental molecular weights of the obtained polymers were close to those calculated, assuming the growth of one polymer chain for one added alcohol equivalent and the polydispersity indexes were monomodal and narrow. The kinetic investigation of the polymerization led to the determination of the apparent propagation constants and the Gibbs free energies of activation for the reaction; the terminal groups of the polymers were also identified. The complex (NSO)AlMe2 was active in harsh conditions such as at a very low concentration or in the melt using technical-grade rac-lactide. A relatively high level of activity was observed in the ring-opening polymerization of ε-caprolactone and rac-β-butyrolactone. DFT calculations were performed and revealed the central role of the NH function of the coordinated ligand. Acting as a hydrogen bond donor, it docks the monomer in the proximity of the metal center and activates it toward the nucleophilic attack of the growing polymer chain.

Synthesis, Characterization, and Biological Investigation of Antimony(III) Halide Complexes With Different Coordination Architectures Constructed From Thiophene Thiosemicarbazones

ABSTRACTIn this study, we report the synthesis, characterization, and biological investigation of antimony(III) halide complexes with various coordination architectures constructed from thiophene thiosemicarbazones. Antimony(III) thiophene‐2‐carbaldehyde thiosemicarbazone complexes (1, 2, 4, and 5) exhibit a square pyramidal geometry, with ligands coordinated to the central antimony atom in two distinct binding modes. In contrast, antimony(III) 2‐acetylthiophene thiosemicarbazone complexes (3, 6, and 7) adopt a seesaw geometry. These complexes (1–7) represent the first reported examples of antimony(III) halide thiosemicarbazone compounds. The unique coordination environments observed in these complexes are of significant importance within the realm of antimony chemistry. These synthesized complexes exhibit different coordination geometries as well as potential biological activities. The antiproliferative activity against the human breast adenocarcinoma (MCF‐7) cell line and antimicrobial activity against Gram‐positive and Gram‐negative bacteria were assessed. Antimony(III) thiophene‐2‐carbaldehyde thiosemicarbazone complexes (1, 2, 4, and 5) showed significant antiproliferative activity with IC50 values ranging from 8.5 to 19.1 μM, while antimony(III) 2‐acetylthiophene thiosemicarbazone complexes (3, 6, and 7) had higher IC50 values. Additionally, the antimony complexes demonstrated selective antimicrobial activity against Gram‐negative bacteria.

Assembly of a Heterobimetallic Fe/Mn Cofactor in the para-Aminobenzoate Synthase Chlamydia Protein Associating with Death Domains (CADD) Initiates Long-Range Radical Hole-Hopping.

Chlamydia protein associating with death domains (CtCADD) is involved in the biosynthesis of p-aminobenzoic acid (pABA) for integration into folate, a critical cofactor that is required for pathogenic survival. CADD activates dioxygen and utilizes its own tyrosine and lysine as synthons to furnish the carboxylate, carbon backbone, and amine group of pABA in a complex multistep mechanism. Unlike other members of the heme oxygenase-like dimetal oxidase (HDO) superfamily that typically house an Fe2 cofactor, previous activity studies have shown that CtCADD likely uses a heterobimetallic Fe/Mn center. The structure of the Fe2+/Mn2+ cofactor and how the conserved HDO scaffold mediates metal selectivity have remained enigmatic. Adopting an in crystallo metalation approach, CtCADD was solved in the apo, Fe2+2, Mn2+2, and catalytically active Fe2+/Mn2+ forms to identify the probable site for Mn binding. The analysis of CtCADD active-site variants further reinforces the importance of the secondary coordination sphere on cofactor preference for competent pABA formation. Rapid kinetic optical and electron paramagnetic resonance (EPR) studies show that the heterobimetallic cofactor selectively reacts with dioxygen and likely initiates pABA assembly through the formation of a transient tyrosine radical intermediate and a resultant heterobimetallic Mn3+/Fe3+ cluster.

Corrolato(oxo)antimony(V) Dimer with Hydrogen-Bond Donor Groups in Secondary Coordination Sphere as a Catalyst for Hydrogen Evolution Reaction.

The focus is on developing alternative molecular catalysts using main-group elements and implementing strategic improvements for sustainable hydrogen production. For this purpose, a FB corrole with a (2-(2-((4-methylphenyl)sulfonamido)ethoxy)phenyl) group inserted into the meso position (C-10) of the corrole, along with its high-valent (corrolato)(oxo)antimony(V) dimer, was synthesized. In the crystal structure analysis of the FB corrole and the (corrolato)(oxo)antimony(V) dimer complex, it was noted that the sulfonamido group in the ligand periphery sits atop the corrole ring. The electrochemical hydrogen evolution reaction (HER) of the (corrolato)(oxo)antimony(V) dimer was studied and compared with a previously reported (corrolato)(oxo)antimony(V) complex, which lacks hydrogen-bond donor groups in the secondary coordination sphere. The newly designed molecules, featuring hydrogen-bond donor groups in the secondary coordination sphere, demonstrated clear superiority in the electrochemical HER. Controlled potential electrolysis was employed to evaluate the charge accumulation associated with hydrogen generation in a homogeneous three-electrode system in the presence of 50 mM TFA. The produced hydrogen exhibits a Faradaic efficiency of approximately 80.96%, a turnover frequency (TOF) of 0.44 h-1, and a production rate of 52.83 μL h-1, highlighting the effective catalytic activity of the (corrolato)(oxo)antimony(V) dimer in hydrogen evolution.

CO2 Reduction by Transition‐Metal Complex Systems: Effect of Hydrogen Bonding on the Second Coordination Sphere

AbstractHomogeneous electrocatalysts typified by transition‐metal complex show transcendent potency in efficient energy catalysis through molecular design. For example, metal complexes with elaborate design performed wonderful activity and selectivity for electrocatalytic CO2 reduction. Primary coordination sphere of metal complexes plays a key role in regulating its intrinsic redox properties and catalytic activity. However, the overall reduction efficiency of CO2 is also bound up with the substrate activation process. Transition‐metal complexes are hoped to exhibit reasonable redox potential, reactive activity, and stability, while binding and activating CO2 molecules to achieve efficient CO2 reduction. Construction of second coordination sphere, especially hydrogen‐bonding network of transition‐metal complexes, is reported to be the “kill two birds with one stone” strategy to realize efficient CO2 reduction catalysis via systematic catalyst properties modulation and substrate activation. Herein, we present recent progress on the construction of hydrogen‐bonding network in the second coordination sphere of metal complexes by ligand modification or the introduction of exogenous organic ligand, and the resulted productive enhancement of the catalytic performance of metal complexes by the improvement of adsorption capacity and activation of CO2, proton transfer rate, and stability of reaction intermediates, and so forth.

Precise Synthesis of Single Atom Catalysts for Boosting Next‐Generation Advanced Oxidation and Reduction Processes in Sustainable Energy Applications

Single‐atom catalysts (SACs) demonstrate high selectivity, maximal atom utilization, and unique active site configurations, establishing them as a rapidly expanding research field. Understanding the intrinsic relationship between structure and catalytic performance is crucial for the effective use of SACs in catalysis. However, providing a clear explanation of the coordination environment and intrinsic structural regulation of SACs remains a significant challenge for next‐generation renewable energy materials, especially in advanced oxidation and reduction processes critical for sustainable energy applications. This comprehensive review offers an in‐depth overview of the current progress and design of SACs, with a specific focus on precise synthesis, structural control, and the relationship between structure and performance. Furthermore, we elucidate the reaction mechanisms of various catalytic systems and the selective methods used to precisely synthesize and enhance catalytic reactions in the sustainable energy sector. Finally, this review explores the complex challenges in investigating and developing SACs and offers a perspective on solutions in advanced oxidation and reduction technologies for future research to overcome these challenges and achieve practical applications.

The Key Role of Proton‐Responsive Groups in Electrochemical Hydrogen Evolution Reaction

AbstractThe much‐needed global shift from fossil fuels to sustainable energy is driving significant attention towards hydrogen (H2) as a promising alternative. Proton reduction, a process central to H2 production, is a key area of research for this transition. Naturally‐occurring [FeFe] and [NiFe]‐hydrogenase enzymes play vital roles in the reversible production and oxidation of H2. These enzymes feature a proton‐relay unit comprising of pendant amine and thiol groups in the secondary coordination sphere at the active site. This unit accelerates the rate of H2 production/oxidation, making it a focal point for scientific exploration. Efforts are concentrated on mimicking the active sites of these enzymes both structurally and functionally. In this pursuit, many synthetic transition metal complexes with proton‐responsive units at the secondary coordination sphere of the active site mimic the enzyme's behavior. These units facilitate intramolecular metal‐hydride (M−H) generation and H2‐elimination via H+/H−s coupling, leveraging the proton from the pendant functional group and the hydride from the M−H intermediate. This review delves into electrocatalysts featuring pendant proton‐responsive units and their roles in the electrochemical hydrogen evolution reaction (eHER).

Mechanistic Study of Highly Active Bifunctional Double-Atom Electrocatalysts for Oxygen Reduction and Oxygen Evolution Reactions.

Dual-atom catalysts (DACs) can be very effective for catalyzing both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, we present theoretical evidence of a new class of highly active DACs, namely, the double-atom embedded in nitrogen-doped graphene sheet 2M-N-C (M = Mn, Fe) on the basis of density functional theory calculations. Importantly, we find that the double active sites of 2M-N-C DACs entail an unconventional catalytic reaction pathway for ORR and OER. We also show that the local coordination environment of the active sites can significantly affect the stability and oxygen catalytic activity of 2M-N-C DACs. In particular, MnFe-N-C DAC not only exhibits good stability but also possesses outstanding bifunctional ORR/OER catalytic activity with the potential difference (ΔE) between the OER and ORR as low as 0.34 V, notably lower than most bifunctional electrocatalysts reported in the literature. This finding suggests a new strategy toward the design of stable and highly active bifunctional electrocatalysts for both ORR/OER.

Hydrogen Evolution Catalysis by Cobalt Complexes of an Aza‐Bridged Bis‐1,10‐Phenanthroline Ligand Bearing Pendant Basic Sites

AbstractA novel series of molecular Co(II) complexes with aza‐bridged bis‐1,10‐phenanthroline (bpa) ligands have been synthesized and reported for the catalytic hydrogen evolution reaction (HER). Various nitrogen donor substituents are introduced at the aza‐bridge of the bis‐phenanthroline moieties render intramolecular basic sites in the complexes’ second‐coordination sphere. Modifying the pendant nitrogen donor significantly influences the catalytic HER performance. Among these, the cobalt complex with the (2‐pyridyl)methyl substituted bis‐phenanthroline ligand (L3) exhibits the most photocatalytic HER efficiency in both organic and aqueous media. Under optimized conditions with [Ru(bpy)3]2+ as a sensitizer and ascorbic acid as an electron donor, [CoII(L3)(TfO−)2] achieves an initial turnover frequency (TOF) of 1882±65 h−1 per catalyst and a turnover number (TON) of 4842±122 in a 3 hour reaction period under the irradiation of visible light. Combined experimental and theoretical evidences illustrate that phenanthroline moieties of the bpa ligands act as electron mediators during the HER catalysis, while the pendant nitrogen donor substituents mediate proton transfer. This work provides a unique example for understanding the activity‐structure relationship of homogeneous HER catalyst concerning the redox‐active properties and second coordination sphere basic sites of organic ligand platforms.

Spiral-Concave Prussian Blue Crystals with Rich Steps: Growth Mechanism and Coordination Regulation.

Investigating the formation and transformation mechanisms of spiral-concave crystals holds significant potential for advancing innovative material design and comprehension. We examined the kinetics-controlled nucleation and growth mechanisms of Prussian Blue crystals with spiral concave structures, and constructed a detailed crystal growth phase diagram. The spiral-concave hexacyanoferrate (SC-HCF) crystals, characterized by high-density surface steps and a low stress-strain architecture, exhibit enhanced activity due to their facile interaction with reactants. Notably, the coordination environment of SC-HCF can be precisely modulated by the introduction of diverse metals. Utilizing X-ray absorption fine structure spectroscopy and in situ ultraviolet-visible spectroscopy, we elucidated the formation mechanism of SC-HCF to Co-HCF facilitated by oriented adsorption-ion exchange (OA-IE) process. Both experimental data, and density functional theory confirm that Co-HCF possesses an optimized energy band structure, capable of adjusting the local electronic environment and enhancing the performance of the oxygen evolution reaction. This work not only elucidates the formation mechanism and coordination regulation for rich steps HCF, but also offers a novel perspective for constructing nanocrystals with intricate spiral-concave structures.

Spiral‐Concave Prussian Blue Crystals with Rich Steps: Growth Mechanism and Coordination Regulation

AbstractInvestigating the formation and transformation mechanisms of spiral‐concave crystals holds significant potential for advancing innovative material design and comprehension. We examined the kinetics‐controlled nucleation and growth mechanisms of Prussian Blue crystals with spiral concave structures, and constructed a detailed crystal growth phase diagram. The spiral‐concave hexacyanoferrate (SC‐HCF) crystals, characterized by high‐density surface steps and a low stress‐strain architecture, exhibit enhanced activity due to their facile interaction with reactants. Notably, the coordination environment of SC‐HCF can be precisely modulated by the introduction of diverse metals. Utilizing X‐ray absorption fine structure spectroscopy and in situ ultraviolet‐visible spectroscopy, we elucidated the formation mechanism of SC‐HCF to Co‐HCF facilitated by oriented adsorption‐ion exchange (OA‐IE) process. Both experimental data, and density functional theory confirm that Co‐HCF possesses an optimized energy band structure, capable of adjusting the local electronic environment and enhancing the performance of the oxygen evolution reaction. This work not only elucidates the formation mechanism and coordination regulation for rich steps HCF, but also offers a novel perspective for constructing nanocrystals with intricate spiral‐concave structures.

Synthetic Control of Water-Stable Hybrid Perovskitoid Semiconductors.

Hybrid metal-halide perovskites and their derived materials have emerged as the next-generation semiconductors with a wide range of applications, including photovoltaics, light-emitting devices, and other optoelectronics. Over the past decade, numerous single-crystalline perovskite derivatives have been synthesized and developed. However, the synthetic methods for these derivatives mainly rely on acidic crystallization conditions. This approach leads to crystals comprising metal halide building blocks, which show problematic stability when directly exposed to water. In this study, a methodology is developed for synthesizing hybrid metal-halide compounds using lead iodide and the zwitterionic bifunctional molecule cysteamine (CYS), to form various perovskitoid structures under a broad pH range. Interestingly, the different pH conditions alter the coordination environment of lead halides, leading to lead-sulfide and lead-nitride covalent bond formation. This modification significantly enhances their stability when in direct contact with water, lasting for months. Photoluminescence measurements and first principal density functional theory (DFT) calculations reveal that the perovskitoids synthesized under basic and acidic pH conditions exhibit a direct bandgap nature, while those synthesized under neutral conditions display an indirect bandgap. This approach opens new avenues for manipulating synthetic methods to develop water-stable hybrid semiconductors suitable for a wide range of applications, such as solid-state light emitters.

Speciation Controls the Kinetics of Iron Hydroxide Precipitation and Transformation at Alkaline pH.

The formation of energetically favorable and metastable mineral phases within the Fe-H2O system controls the long-term mobility of iron complexes in natural aquifers and other environmentally and industrially relevant systems. The fundamental mechanism controlling the formation of these phases has remained enigmatic. We develop a general partial equilibrium model, leveraging recent synchrotron-based data on the time evolution of solid Fe(III) hydroxides along with aqueous complexes. We combine thermodynamic considerations and particle-morphology-dependent kinetic rate equations under full consideration of the aqueous phase in disequilibrium with one or more of the forming minerals. The new model predicts the rate of amorphous 2-line ferrihydrite precipitation, dissolution, and overall transformation to crystalline goethite. It is found that the precipitation of goethite (i) occurs from solution and (ii) is limited by the comparatively slow dissolution of the first forming amorphous phase 2-line ferrihydrite. A generalized transformation mechanism further illustrates that differences in the kinetics of Fe(III) precipitation are controlled by the coordination environment of the predominant Fe(III) hydrolysis product. The framework allows modeling of other iron(bearing) phases across a broad range of aqueous phase compositions.

Comparative analysis of tetravalent actinide Schiff base complexes: influence of donor and ligand backbone on molecular geometry and metal binding.

A series of isostructural early actinide AnIV complexes was synthesized in order to investigate the influence of a conjugated framework in the ligand backbone on An bonding. Therefore, the AnIV complexes [An(pyrophen)2] (An = Th, U, Np, and Pu) with the pure N-donor ligand bis(2-pyrrolecarbonylaldehyde)-o-phenylenediamine referred to as pyrophen, were synthesized and characterized. Solid state analysis via single-crystal X-ray diffraction (SC-XRD) reveals two sets of ligands binding in an almost orthogonal arrangement to the actinide center. For the larger actinides Th and U, the coordination sphere allows for additional coordination by a solvent molecule. Nuclear magnetic resonance spectroscopy (NMR) studies show the presence of highly symmetrical complexes in solution in good agreement with the solvent-free solid structures. While SC-XRD suggests mainly ionic binding, an analysis of paramagnetic NMR contributions and quantum chemical bond analysis hint towards significant covalency in the U, Np, and Pu compounds. This series of An complexes allowed for a thorough structural and theoretical comparison of a conjugated system to a closely related N-donor ligand (pyren)[1], as well as to the mixed N,O Schiff base ligands salophen (conjugated) and salen (non-conjugated).

Bimetallic Uranium Complexes with 2,6-Dipicolinoylbis(N,N-Dialkylthioureas)

2,6-Dipicolinoylbis(N,N-dialkylthioureas), H2LR, readily react with uranyl salts under formation of monomeric or dimeric complexes of the compositions [UO2(LR)(solv)] (solv = donor solvents such as H2O, MeOH or DMF) or [{UO2(LR)(µ-OMe)}2]2− (1). In such complexes, the uranyl ions are exclusively coordinated by the “hard” O,N,O or N,N,N donor atom sets of the central ligand unit and the lateral sulfur donor atoms do not participate in the coordination. Different conformations have been found for the dimeric anions. The bridging methanolato ligands and the four uncoordinated sulfur atoms can adopt different orientations with respect to the equatorial coordination spheres of the uranyl units. The presence of non-coordinated sulfur atoms offers the opportunity for the coordination of additional, preferably “soft” metal ions. Thus, reactions with [AuCl(PPh3)], lead acetate or acetates of transition metal ions such as Ni2+, Co2+, Fe2+, Mn2+, Zn2+, or Cd2+, were considered for the syntheses of bimetallic complexes. Various oligometallic complexes with uranyl units were prepared: [{UO2(LR)(μ-OMe)(Au(PPh3)}2] (2), [(UO2)3Pb2(LR)4(MeOH)2(μ-OMe)2] (3), [M{UO2(LR)(OAc)}2] (M= Zn, Ni, Co, Fe, Mn or Cd) (R = Et: 5, RR = morph: 6), or [(UO2)(NiI)2(LR)2] (7). The products were extensively studied spectroscopically and by X-ray diffraction.