Conversion Factor Research Articles

The tight correlation between PAH and CO emission from z ∼ 0 to 4

Aims. The cold molecular gas mass is one of the crucial, yet challenging, parameters in galaxy evolution studies. Here, we introduce a new calibration and a method for estimating molecular gas masses using mid-infrared (MIR) photometry. This topic is timely as the James Webb Space Telescope (JWST) now allows us to detect the MIR emission of typical main-sequence galaxies across a wide range of masses and star formation rates with modest time investments. Additionally, this Letter highlights the strong synergy between ALMA and JWST for studies of dust and gas at cosmic noon. Methods. We combined a sample of 14 main-sequence galaxies at z = 1 − 3 with robust CO detections and multi-band MIR photometry, along with a literature sample at z = 0 − 4 with CO and polycyclic aromatic hydrocarbon (PAH) spectroscopy, to study the relationship between PAH, CO(1–0), and total IR luminosities. PAH luminosities are derived by modelling a wealth of rest-frame UV to sub-millimetre data. The new z = 1 − 3 sample extends previous high-z studies to PAH and CO luminosities that are about an order of magnitude lower, into the regime of local starbursts, for the first time. Results. The PAH-to-CO luminosity ratio remains constant across a wide range of luminosities, for various galaxy types, and throughout the explored redshift range. In contrast, the PAH-to-IR and CO-to-IR luminosity ratios deviate from a constant value at high IR luminosities. The intrinsic scatter in the L(PAH)–L′(CO) relation is 0.21 dex, with a median of 1.40 and a power-law slope of 1.07 ± 0.04. Both the PAH–IR and CO–IR relations are sub-linear. Given the tight and uniform PAH–CO relation over ∼3 orders of magnitude, we provide a recipe for estimating the cold molecular gas mass of galaxies from PAH luminosities, with a PAH-to-molecular gas conversion factor of αPAH7.7 = (3.08 ± 1.08)(4.3/αCO) M⊙/L⊙. This method opens a new window to explore the gas content of galaxies beyond the local Universe using multi-wavelength JWST/MIRI imaging.

Size-specific dose estimates calculated using patient size measurements from scanned projection radiograph in high-resolution chest computed tomography.

Size-specific dose estimates (SSDE) are used to assess patient-specific radiation exposure in Computed Tomography (CT), complementing the volume CT dose index (CTDIvol). This study compared SSDE calculated using patient's lateral size from scan projection radiograph (SPR) with SSDE calculated using water equivalent diameter (Dw) from tomographic images in adult chest high-resolution CT (HRCT). In a single-centre study, the CTDIvol and dose-length product (DLP) were recorded from HRCT dose reports of adult patients. Lateral width (SLat), at the centre of the scan range, from the SPR was measured and the SSDE (SSDER) was calculated using conversion factors related to SLat. Average CT number, area of the slice, and lateral size of the patient (AxLat) were measured on the middle slice. The Dw and SSDE from Dw (SSDEW) were calculated. SSDER and SSDEW were compared using Wilcoxon signed rank test. Correlation between patient size and dosimetry parameters were investigated using Spearman Correlation test with statistical significance at P < 0.05. Bland-Altman plot was also used to test agreement between the two SSDE values. Median CTDIvol, DLP, SSDER and SSDEW were 11.0 mGy, 372 mGy.cm, 11.6 mGy and 12.9 mGy, respectively. Small but statistically significant differences (P < 0.03) were found between SLat and AxLat as well as between SSDER and SSDEW. Bland-Altman analysis resulted in borderline agreement between SSDE values. Moderate correlations were observed between dosimetry quantities and patient size measurements (ρ > 0.640; P < 0.001). SSDEw showed statistically significant correlation (ρ = 0.587 and P < 0.001) with SSDER. SSDER may be used to assess patients' absorbed radiation dose, before the scan, in adult chest HRCT. The median value of SSDER was about 10% lower than the median value SSDEW. However, the SSDEW should be used after the scan to establish effective dose and radiation risk to the patient.

The Residual Activity of Fatty Acyl-CoA Reductase Underlies Thermo-Sensitive Genic Male Sterility in Rice.

Photoperiod/thermo-sensitive genic male sterility (P/TGMS) is critical for rice two-line hybrid system. Previous studies showed that slow development of pollen is a general mechanism for sterility-to-fertility conversion of TGMS in Arabidopsis. However, whether this mechanism still exists in rice is unknown. Here, we identified a novel rice TGMS line, ostms16, which exhibits abnormal pollen exine under high temperature and fertility restoration under low temperature. In mutant, a single base mutation of OsTMS16, a fatty acyl-CoA reductase (FAR), reduced its enzyme activity, leading to defective pollen wall. Under high temperature, the mOsTMS16M549I couldn't provide sufficient protection for the microspores. Under low temperature, the enzyme activity of mOsTMS16M549I is closer to that of OsTMS16, so that the imperfect exine could still protect microspore development. These results indicated whether the residual enzyme activity in mutant could meet the requirement in different temperature is a determinant factor for fertility conversion of P/TGMS lines. Additionally, we previously found that res2, the mutant of a polygalacturonase for tetrad pectin wall degradation, restored multiple TGMS lines in Arabidopsis. In this study, we proved that the osres2 in rice restored the fertility of ostms16, indicating the slow development is also suitable for the fertility restoration in rice.

A Review of the Lawrence Livermore Nuclear Accident Dosimeter 1980s-present

A Nuclear Accident Dosimetry program is a federal requirement for all facilities that have the potential to have a criticality accident. Personnel Nuclear Accident Dosimeter (PNAD) theory and analytical procedures are driven by various scientific needs and interacting regulations. A brief history of the status of USA Department of Energy (DOE) nuclear accident dosimetry regulations, recommendations, and performance testing criteria are given. Then, the history of the Lawrence Livermore National Laboratory (LLNL) PNAD is explored, including changes in the physical dosimeter and adjustments of the analysis method through the last four decades. Finally, the performance of LLNL’s PNAD at criticality accident intercomparison training exercises since 2009 is explored. In general, reported neutron doses have been within or close to DOE-STD-1098 performance criteria while reported gamma doses have been outside of DOE-STD-1098 performance criteria. Reported total absorbed doses have varied in meeting ANSI/HPS N13.3 and ANSI/HPS N13.3 (R2019) performance criteria. Dosimetry staff retirement and turnover have left historical knowledge gaps, yet provided opportunities within the NAD program at LLNL. This review paper serves as an overview of the history and status of the NAD program. Brief technical, procedural and programmatic recommendations to improve LLNL’s NAD program are given. Technical recommendations include investigating orientation factors through modeling or empirical experimentation, investigating gamma dosimetry methods for high-dose scenarios, and exploring other dosimetric methods for simpler, quicker NAD analysis. Procedural recommendations include better documentation of conversion factor (activity-to-fluence and fluence-to-dose) derivations and spectrum uses, and updated analysis spreadsheets or simple Graphic User Interfaces for dose calculations. Programmatic recommendations include formalized training for NAD analysts, and having multiple SMEs trained on the NAD program.

Medial Joint Opening in the Operated Knee After Unilateral High Tibial Osteotomy: Risk of Osteoarthritis and Future Surgery in the Operated and Nonoperated Knee

Background: High tibial osteotomy (HTO) modifies the mechanics of the affected knee but can also affect the nonoperated knee. However, no research has reported on the prognosis and risk factors related to the nonoperated knee after unilateral HTO. Purpose: To assess the radiological parameters associated with osteoarthritis (OA) progression and the need for surgery in the nonoperated knee after unilateral HTO, with concurrent assessment of the operated knee. Study Design: Case series; Level of evidence, 4. Methods: The medical charts of 197 patients with knee OA who underwent unilateral HTO between March 2007 and December 2020 were retrospectively investigated. Radiological parameters such as the Kellgren-Lawrence grade, weightbearing line ratio, joint line convergence angle (JLCA), and joint line obliquity angle were assessed preoperatively and 1 year postoperatively. Results: The mean follow-up length for the 197 patients was 5.9 ± 3.2 years for the operated knee and 5.5 ± 3.2 years for the nonoperated knee. A smaller postoperative JLCA in the operated knee was a significant risk factor for OA progression (P = .027) and undergoing surgery (P = .006) in the nonoperated knee. Conversely, a larger postoperative JLCA in the operated knee was a significant risk factor for OA progression (P = .014) and conversion to arthroplasty (P = .027) in the operated knee. A postoperative JLCA >1.5° (P < .001) and <3.9° (P < .001) was needed to reduce the risk of undergoing surgery in the nonoperated knee and OA progression in the operated knee, respectively. Additionally, a pre- to postoperative change in the JLCA (ΔJLCA) between −5.6° and −1.7° (P = .021 and P = .004, respectively) was needed to reduce the risk of OA progression in both knees. Conclusion: A large medial joint opening (a small postoperative JLCA) in the operated knee after unilateral HTO was associated with a higher risk of OA progression and surgery in the nonoperated knee. Conversely, a small medial joint opening (a large postoperative JLCA) was associated with a higher risk of OA progression and conversion to arthroplasty in the operated knee. For a balanced medial joint opening, if the postoperative JLCA was between 1.5° and 3.9° or the ΔJLCA was between −5.6° and −1.7°, a favorable prognosis in both knees could be anticipated.

Qualification of an enzyme-linked immunosorbent assay for quantification of anti-Vi IgG in human sera.

Effective vaccines against Salmonella Typhi, targeting the Vi capsular polysaccharide, have been developed and are being introduced into routine immunization in endemic countries. Vi conjugated vaccines are also being tested in new multi-component vaccine formulations. Simple, high-throughput and cost-effective assays to quantify Vi-specific IgG in clinical sera are needed. In this study we present the development and qualification of a new anti-Vi ELISA with continuous readout, which expresses results as ELISA Unit/mL (EU/mL). We have qualified the assay in terms of precision, linearity and specificity, demonstrating performance in line with a commercially available anti-Vi ELISA. We have also calibrated the assay against the 16/138 anti-Vi international standard and established conversion factor between EU/mL and international units/mL, to allow comparability of results across studies. In summary, this new assay met all the suitability criteria and is being used to evaluate anti-Vi responses in clinical studies.

Direct measurements of firn-density evolution from 2016 to 2022 at Wolverine Glacier, Alaska

Abstract Knowledge of snow and firn-density change is needed to use elevation-change measurements to estimate glacier mass change. Additionally, firn-density evolution on glaciers is closely connected to meltwater percolation, refreezing and runoff, which are key processes for glacier mass balance and hydrology. Since 2016, the U.S. Geological Survey Benchmark Glacier Project has recovered firn cores from a site on Wolverine Glacier in Alaska's Kenai Mountains. We use annual horizons in repeat cores to track firn densification and meltwater retention over seasonal and interannual timescales, and we use density measurements to quantify how the firn air content (FAC) changes through time. The results suggest the firn is densifying due primarily to compaction rather than refreezing. Liquid-water retention in the firn is transient, likely due to gravity-fed drainage and irreducible-water-content decreases that accompany decreasing porosity. We show that the uncertainty (±60 kg m−3) in the commonly used volume-to-mass conversion factor of 850 kg m−3 is an underestimation when glacier-wide FAC variability exceeds 12% of the glacier-averaged height change. Our results demonstrate how direct measurements of firn properties on mountain glaciers can be used to better quantify the uncertainty in geodetic volume-to-mass conversions.

Development of Titanium Dioxide Coating for Self-Cleaning Photovoltaic Panels

Amid escalating global energy demands and environmental concerns, the transition to renewable sources like solar power is imperative. Despite the advancements in photovoltaic (PV) technology promising increased efficiency, soiling on PV panels—composed of dust, bird droppings, and contaminants—poses a significant challenge, obstructing sunlight and reducing energy conversion efficiency. Building upon existing research on titanium dioxide (TiO2) nanoparticle coatings, our study investigates their super-hydrophilic and anti-soiling characteristics to enhance self-cleaning capabilities in solar applications. Furthermore, our research investigates the application of (3-aminopropyl)trimethoxy silane as an interlayer to reinforce the adherence of the TiO2 coating to PV panel glass, thereby enhancing its durability. Preliminary results highlight the coating’s exceptional super-hydrophilic properties, with water contact angle measurements less than 10°, indicative of TiO2’s strong water affinity. Spectrophotometer measurements show that the developed coating maintains high optical transmittances for the wavelength range from 350 to 800 nm, which is the most crucial factor for energy conversion in solar panels. Our contributions aim to advance solar energy technologies and support the shift towards more sustainable energy solutions, highlighting the role of innovative materials science in addressing solar power’s operational challenges.

Gauge-invariant renormalization of four-quark operators

We study the renormalization of four-quark operators in one-loop perturbation theory. We employ a coordinate-space gauge-invariant renormalization scheme (GIRS), which can be advantageous compared to other schemes, especially in nonperturbative lattice investigations. From our perturbative calculations, we extract the conversion factors between GIRS and the modified minimal subtraction scheme (MS¯) at the next-to-leading order. As a by-product, we also obtain the relevant anomalous dimensions in the GIRS scheme. A formidable issue in the study of the four-quark operators is that operators with different Dirac matrices mix among themselves upon renormalization. We focus on both parity-conserving and parity-violating four-quark operators, which change flavor numbers by two units (ΔF=2). The extraction of the conversion factors entails the calculation of two-point Green’s functions involving products of two four-quark operators, as well as three-point Green’s functions with one four-quark and two bilinear operators. The significance of our results lies in their potential to refine our understanding of QCD phenomena, offering insights into the precision of Cabibbo-Kobayashi-Maskawa (CKM) matrix elements and shedding light on the nonperturbative treatment of complex mixing patterns associated with four-quark operators. Published by the American Physical Society 2024

A new approach for optimal design of intensive care unit

Planning and budgeting for healthcare facilities necessitate precise estimation and a thoughtful analysis of the required area for each department, as well as extensive knowledge of the most important elements that can influence the design and provide an appropriate environment for staff and patients. A gross conversion factor is influential in calculating the entire area of a department. However, there is no precise standard indicating how this factor should be calculated. To address this problem, quality function deployment (QFD) has been implemented. The intensive care unit (ICU) is one of the highly equipped departments that should be properly planned; therefore, it was selected for application. The five steps of the QFD are used to identify and rank the most important and efficient design features. Only the top factors are considered in calculating the required area for the ICU department. This approach presents a unique method for estimating the gross square area based on calculating the gross conversion factor. To demonstrate the proposed approach’s efficacy, it was applied to two Egyptian public hospitals. The results reveal that 15–16% of the total space of both hospitals can be reduced from the total department space. Moreover, an outstanding reduction in ICU design and preparation expenses has been achieved. The design reduces the required budget for a project while maintaining the same construction material quality and accommodating extra beds. Additionally, the QFD proves its ability to redesign the ICU department while reducing costs.

Adjusting dialysis dose (Kt) scaled to Body Surface Area (BSA) could be a more logical approach.

The dialysis dose, quantified as Kt, is conventionally scaled to the urea distribution volume (V) to calculate the Kt/V ratio as an indicator of dialysis adequacy. However, the body surface area (BSA) is recognized as a more accurate reflection of metabolic activity compared to V. This study presents evidence supporting the enhanced efficacy of the Kt/BSA ratio as an indicator of hemodialysis adequacy. The study population comprised 211 individuals undergoing hemodialysis, all of whom had Kt/V values determined. Body composition was assessed using bioimpedance techniques, and BSA was calculated employing the DuBois and DuBois formula. The ratio of V/BSA served as the conversion factor to derive Kt/BSA from the standard Kt/V. Participants were categorized by gender, and a comparative analysis was performed on dialysis-related parameters alongside body composition indicators. Concurrently, linear regression analysis was applied to Kt/V and Kt/BSA, as well as to pairs of V and BSA, to elucidate the relationships among these variables. The average Kt/V ratio was 1.50 with a standard deviation of 0.28. The Kt/V ratio was significantly higher in women (P < 0.01). Conversely, the Kt value, when not adjusted for body size, was significantly lower in women (P < 0.01). Upon scaling Kt to BSA to calculate Kt/BSA, the gender difference in dialysis dose adequacy was no longer statistically significant (P = 0.06). Men exhibited a significantly higher mean V/BSA ratio. Additionally, women had a slightly higher mean percentage of fat mass (P < 0.01). In contrast, women had a lower mean percentage of muscle mass (P < 0.01). Our findings suggest that the Kt/V ratio may underestimate the required hemodialysis dose for women. There was no gender difference when Kt scaling to BSA. Consequently, the Kt/BSA ratio, which accounts for body surface area, may play a significant role in more accurately scaling the hemodialysis dose.

Comparison of Lab vs. Backcalculated Moduli of Virgin Aggregate and Recycled Aggregate Base Layers

The resilient modulus (MR) and the backcalculated modulus from the FWD testing (EFWD) of the unbound layers are critical inputs in the analysis/design of pavements. Several studies have tried to develop a conversion factor between these two parameters, while the nonlinear stress dependency of unbound materials and the pavement strain response are mostly missing from the literature. This study aims to compare the laboratory-measured MR of recycled aggregate base (RAB) materials and a virgin aggregate base using field-based EFWD and tries to establish pavement’s responses to loading using vertical strains from both the MR and EFWD values of the respective materials as comparability parameters between the two. For this purpose, a control virgin aggregate (VA, limestone) and three types of RAB materials were selected to construct four test sections. The test sections were modeled in layered elastic- and finite-element-based pavement response models to calculate the vertical strains at the mid-depth of the base and top of the subgrade layers. A comparison of the lab-calculated vertical strains using MR with actual vertical strains in the field from EFWD showed that there was no relationship between the two stiffness parameters in all tested RABs. The vertical strains, based on the lab MR, undermined the stiffness of the recycled aggregates in the field. In contrast, the values of EFWD based on the vertical strains remained close to the MR strains of limestone (VA) throughout the testing period, establishing an EFWD vs. MR relationship (MR = 0.87 EFWD). The results also show that fine RCA was a better-performing material over three years. This research not only explores how the hydration process in RABs limits the development of MR-EFWD correlations but also underscores the need to consider real-world conditions when assessing their performance.

8141 A Rare Case of Follicular Adenoma with Osseous Metaplasia and Mature Bone Formation- Is Surveillance Important?

Abstract Disclosure: K. Madani: None. Y. Al-Khazraji: None. D.H. Sacoto: None. G.K. Rai: None. R. Belokovskaya: None. A.A. Franco-Akel, MD: None. Osseous metaplasia and mature bone formation (MBF) are common in malignant thyroid and parathyroid tumors. It is very unusual to have MBF in a benign tumor-like follicular adenoma, as in the case we describe. We found only twelve such cases reported in the literature, and none addressed the cancer risk or need for surveillance for the development of potential malignancy. Thus, further studies are required to investigate the need for surveillance in patients not undergoing excision and in those with remnant thyroid tissue post-removal of the adenoma for recurrence. A 43-year-old female with history of hyperlipidemia and hypothyroidism had an incidental finding of midline neck mass during the evaluation of a left upper extremity lipoma. Ultrasound of the neck showed two nodules in the Left (L) thyroid lobe: a complex nodule measured 2.2 x 1.2 x 2.1 cm and a calcified nodule measuring 1.5 x 0.8 x 0.6 cm. MRI of the neck revealed a 1.9 cm heterogeneously enhancing nodule in the mid to lower pole of the L thyroid lobe. The patient had symptoms suggestive of compression, such as dysphagia, odynophagia, and hoarseness; thus, left hemothyroidectomy was performed. Tissue biopsy was notable for follicular adenoma with osseous metaplasia and mature bone formation. The patient remained clinically and biochemically euthyroid, with only mildly elevated thyrotropin level, and treatment with levothyroxine 25 mcg once daily was initiated. On post-surgical follow-up, there was a lack of data to support close monitoring modality and strategy for the remnant thyroid lobe and neck nodal compartments. We concluded with the patient to follow up in a clinical visit for a physical exam of the neck and to obtain a follow-up sonogram at an interval of six months, in addition to monitoring TSH levels to guide hypothyroidism therapy. Osseous metaplasia has not been established as a premalignant condition, but in certain tissues like the esophagus, metaplasia is a risk factor for malignant conversion, for instance, in Barrett’s esophagus leading to esophageal adenocarcinoma. Moreover, MBF in thyroid tissue has been attributed to the activity of basic fibroblast growth factor (bFGF) and bone morphogenetic protein-2 (BMP-2), which are linked with mitogenesis and tumorigenesis. Thus, the question arises if post-excision surveillance is required in patients with a history of osseous metaplasia in remnant thyroid tissue post-lobectomy or partial thyroidectomy. At this point, more epidemiological data on similar cases may help us understand the true risk of this clinical scenario, in order to develop a reasonable approach for surveillance. Presentation: 6/3/2024

Prediction of fetal growth restriction in obese women

Objective. To develop a way of prediction of fetal growth restriction in the first trimester of pregnancy in obese women. Materials and methods. 85 obese pregnant women at 6–9 weeks of gestation took part in the study. Obesity was determined by body mass index, as squared height (m)-to-weight (kg) ratio, with a BMI 30 kg/m2. In the blood serum of all patients the level of total copper (Cuvol.) was determined by the colorimetric method, and ceruloplasmin (CP) by of V.S. Kamyshnikov`s method and the percentage of free copper (Cufree) was calculated. The free copper index was calculated using the formula: Cufree = (Cuvol. – (ceruloplasmin · 3)) / Cuvol. · 100, where Cufree is the percentage of free copper in the blood serum, %; Cuob. – content of total copper in blood serum, µmol/l; CP – content of ceruloplasmin in blood serum, mg/l; 3 – conversion factor. All pregnant women were divided into two groups depending on the percentage of free copper: group A – pregnant women with obesity and free copper content 25 % (n = 26); group B – obese pregnant women with a percentage of free copper 25 %, (n = 59). The control group consisted of 20 pregnant women with normal body weight. Results. Among the studied groups, in pregnant women with obesity statistically significant differences in the content of total copper (p = 0.013), and the percentage of free copper (p = 0.041) were revealed. In the group of pregnant women with a free copper content 25 % chronic placental insufficiency occurred 1.5 times more frequently and fetal growth restriction syndrome was 6.4 times more frequent than in the group of patients with a free copper content of 25 %. Conclusion. The free copper level, determined in the first trimester of pregnancy equal to 25% or more, can be considered as a predictor of fetal growth restriction in obese pregnant women.

Test of the relation between temporal and spatial [formula omitted] by Knopoff et al.

The quality factor is a dimensionless measure of the energy loss per cycle of wave modes in an attenuation medium. Accurate measurement is important in various fields, from seismological studies to detect zones of partial melting to the geophysics of reservoirs to study rock properties such as porosity, fluid properties and saturation and permeability. In seismology, the quality factors measured for normal (standing) modes and propagating waves differ, as well those of equivalent experiments based on resonant rods and ultrasonic pulses performed in the laboratory. These measurements result in temporal and spatial quality factors respectively. A relationship between these two different quality factors and between the corresponding attenuation factors was proposed by Knopoff et al. sixty years ago. The conversion factor is basically the ratio between the phase velocity and the group velocity, while for the attenuation factor is the group velocity. We test these relations, which hold for low-loss solids, for body waves, using a Kelvin-Voigt rheology and a constant Q model, which provide explicit expressions of the temporal and spatial quality factors and velocities involved in these relations. The proposed theory provides the basis for a complete characterization of temporal and spatial quality factors and velocity dispersion based on arbitrary stress–strain relationships.

Mechanical Robustness Analysis of Semiconductors with a Single Needle Probe Card Using Acoustic Emissions

The combination of indentation testing and acoustic emission (AE) is widely used to analyze the fracture toughness of test substrates. In the manufacturing of semiconductor devices this material parameter also plays an important role. During the so-called wafer testing inside a wafer prober small probe tips are pressed onto the chip surface to check its performance. To prevent damaging the chip by that, the fracture toughness and load limit of it has to be defined in a prequalification step. This paper presents a test system that imitates the wafer testing process as close as possible and uses acoustic emission to detect appearing cracks and thereby also the load limit. The frontend of the test setup consists of a modular single needle probe card which can be placed in a wafer prober. Also, the indenter properties (tip diameter, stiffness, etc.) can be adjusted to the probe used later on during productive wafer testing to ensure realistic probing conditions. A piezoelectric sensor and a full strain gauge Wheatstone bridge are implemented close to the single indenter to measure the AEs and the applied contact force respectively. The signal-to-noise-ratios (SNRs) of both sensors are improved with an own analog amplifier module before recording them with an USB oscilloscope. A developed measurement software (LabVIEW) is used to adjust measurement parameters (trigger limit, record length, conversion factors, etc.) and automatically store and separate measurement data from different acoustic events and imprints. To evaluate the result files a second software tool (MATLAB) reads the files out and clusters the recorded events to separate crack signals from electrical and mechanical disturbances. With a prototype first test results are generated and the functionality and accuracy of the measurement concept is proven.

Recommendations on bioacoustical metrics relevant for regulating exposure to anthropogenic underwater sounda).

Metrics to be used in noise impact assessment must integrate the physical acoustic characteristics of the sound field with relevant biology of animals. Several metrics have been established to determine and regulate underwater noise exposure to aquatic fauna. However, recent advances in understanding cause-effect relationships indicate that additional metrics are needed to fully describe and quantify the impact of sound fields on aquatic fauna. Existing regulations have primarily focused on marine mammals and are based on the dichotomy of sound types as being either impulsive or non-impulsive. This classification of sound types, however, is overly simplistic and insufficient for adequate impact assessments of sound on animals. It is recommended that the definition of impulsiveness be refined by incorporating kurtosis as an additional parameter and applying an appropriate conversion factor. Auditory frequency weighting functions, which scale the importance of particular sound frequencies to account for an animal's sensitivity to those frequencies, should be applied. Minimum phase filters are recommended for calculating weighted sound pressure. Temporal observation windows should be reported as signal duration influences its detectability by animals. Acknowledging that auditory integration time differs across species and is frequency dependent, standardized temporal integration windows are proposed for various signal types.

A power-law distribution of infectious quanta for the top 30% of SARS-CoV-2-infected individuals

Minimising airborne infection with respiratory viruses, such as SARS-CoV-2, requires knowledge of the infectious quanta generation rate for determining the minimum dilution requirement. The two existing methods for estimating quanta generation rates are the viral load method and outbreak method. The former method is challenged by significant uncertainty in input data, including dose-response parameters and infectious viral loads. The latter method, based on the Wells–Riley equation, is challenged by significant individual heterogeneity in quanta generation rates and lack of outbreak data. In this study, the two methods are integrated for studying the quanta generation profile of all individuals infected with an ancestral SARS-CoV-2 strain, based on four reported outbreaks of infection. The airborne transmission droplet size ranges in the four outbreaks, which were determined in previous studies, are used to estimate the hourly volume of expired droplets for the viral load method. Various viral load datasets and conversion factors from RNA copies to infectious quanta are tested. Two criteria are used to identify the probable quanta generation profile, i.e. 70% of infected individuals do not infect others, and the estimated quanta generation rates estimated using the outbreak method should be within the top 80%–99% of infected individuals. The predicted quanta generation profile of all individuals infected with SARS-CoV-2 follows a log-normal distribution, whereas that of the top 30% of infected individuals approximately follows a power-law distribution.Practical significance: A major obstacle in defining dilution requirements for minimising airborne infection is the lack of infectious quanta generation rates for the general population. Our approach integrates two existing quanta estimation methods and paves the way to obtaining reliable quanta generation rate profiles at the population level.

Tire and road wear particles in infiltration pond sediments: Occurrence, spatial distribution, size fractionation and correlation with metals

Stormwater systems, such as infiltration ponds or basins, play a critical role in managing runoff water and reducing particulate pollution loads in downstream environments through decantation. Road runoff carries several pollutants, including trace metals and tire and road wear particles (TRWP). To improve our understanding of infiltration ponds as regards TRWP and their capacity to reduce TRWP loads, we have studied the occurrence, spatial distribution and size distribution of TRWP, as well as their relationship with metals, in considering the input of metals as tire additives, in the sediments of an infiltration pond located along the Nantes urban ring road (Western France), which happens to be a high-traffic roadway site. The sediment was analyzed using pyrolysis coupled with gas chromatography–mass spectrometry to determine the polymeric content of tires, specifically in quantifying the styrene-butadiene rubber (SBR) and butadiene rubber (BR) pyrolytic markers. By applying an SBR + BR-to-TRWP conversion factor, the results showed significant TRWP contamination, up to 65 mg/g, with a spatial enrichment from the entrance to the overflow section of the pond. Size fractionation revealed a bimodal distribution, indicating two distinct types of TRWP. The first type is characterized by small diameters (63–160 μm), suggesting the presence of TRWP less integrated with mineral and organic particles. The second type, characterized by larger diameters (200–500 μm), suggests a more pronounced integration with these same mineral and organic particles. A significant positive correlation between TRWP and metals (As, Cd, Cr, Cu, Li, Mo, Ni, Sb, V, Zn) was found (r > 0.739, p < 0.05). This correlation implies that TRWP and/or their associated phases may act as an indicator of metal contamination in the pond sediments. Lastly, a mass balance between TRWP inputs and the amount retained in the sediments underscores the role of infiltration ponds as “sinks” for TRWP.

Decomposition and decoupling: A case study of Colombia's energy consumption and economic growth

Nowadays, nobody can deny the relationship between economic growth and sustainability; however, the tendency to un-match a linear relationship between those two has acquired the name of “decoupling” economy, which means that the consumption of energy not necessarily has to rise at the same rate of gross domestic product, in order to reduce carbon emissions in a country or certain area. Then this document aims to study the Colombian decoupling, analyzing the economic structure and energy consumption between 1975 and 2021, applying the TAPIO model and the logarithmic mean Divisa index (LMDI) using the KAYA identity as a conversion factor (TAPIO + KAYA + LMDI) to analyze the trends per economical sector. Finding that, the Colombian economy has a predominant status of weak decoupling with randomly switches to strong decoupling, positioning it as a sustainable economy; although this condition is environmentally favorable, under a comprehensive public policy, energy consumption by economic sector can be increased to improve economic productivity and achieve better production levels on the sectors of agriculture, mines, and commerce whose energy consumption according to the data is substantially low.