Conventional Fertilization Research Articles

Low Nitrogen Availability in Organic Fertilizers Limited Organic Watermelon Transplant Growth

Fertilization guidelines for organic watermelon transplant production are rare. We investigated the effect of four commercial organic fertilizers and seven organic fertilizer blends, along with one conventional fertilizer (Peter’s Professional 20-20-20) on watermelon transplants. The four organic fertilizers were Nature Safe (fertilizer label: 7-7-7), Miracle-Gro (8-8-8), Dr. Earth fertilizer tea (4-4-4), and Drammatic (2-4-1). The seven blended organic fertilizers were created by supplementing Drammatic with nitrogen (N)-rich and/or potassium (K)-rich fertilizers to balance its N:phosphorus (P):K ratios. Watermelon ‘Jubilee’ was sown in organic substrate, and fertilizer treatments were applied weekly with a total of 0.4 g nitrogen/L substrate. Miracle-Gro and Drammatic had the highest N mineralization rate after 21 days and the highest inorganic N concentration, respectively, and resulted in the highest shoot dry weight among organic fertilizers. Miracle-Gro also resulted in the highest root dry weight. Dr. Earth fertilizer tea supplied the lowest N and P, and resulted in stunted transplants. Our results indicated that nitrate concentration was the most important factor influencing both shoot and root growth. Supplementing Drammatic with N-rich and/or K-rich fertilizers to balance its N:P:K ratio did not affect shoot and root dry weight. Combined, we concluded that nitrogen availability rather than nutrient balance is the key factor influencing watermelon transplant growth.

Organic fertilizer integrated with marine waste derived CaCO3 nanocarrier system: A focus on enhanced yield and quality in tomato cultivation

Tomatoes are rich in lycopene, β-carotene, ascorbic acid and other mineral sources including phosphorus, potassium, zinc, magnesium and iron. Major constraints in tomato cultivation were high cost, poor cultivation due to adverse weather conditions, pest attacks, microbial infections and nutritional deficiency complications. Conventional fertilizers, pesticides, fungicides and growth regulators are effective at higher concentration, which induces specific toxic effects on soil fertility, plant yield and also affects the health status of humans, animals and soil associated microbes. The use of organic fertilizers to meet the soil nutrient demand increases the acidity of soil affecting plant growth, which turned the focus of researchers towards nanofertilizer. The present study focuses on synthesis of marine waste derived CaCO3 nanoparticles formulated with azadirachtin and panchakavya emulsion to develop a CaCO3 nanofertilizer. CaCO3 nanofertilizer developed through this study was investigated for its material properties and behavioral traits. Further, the in-vitro antifungal impact of the CaCO3 nanofertilizer was examined, and it was sprayed on tomato plants via foliar spray. CaCO3 nanofertilizer effectively inhibited fusarium wilt causing plant fungal pathogen and also exhibited enhanced growth and yield of tomatoes against pest attack and nutritional deficiency with effect to foliar treatment. Also, CaCO3 nanofertilizer enhanced the total carotenoid level and essential nutritional minerals in fruit yield of tomatoes. Overall, fabricated CaCO3 nanofertilizer exhibits synergistic role of fertilizer, pesticide, fungicide and growth regulator in tomato cultivation. It suggests that, CaCO3 nanofertilizer generated from renewable biowaste will become the innovative platform for sustainable agriculture.

Risk Assessment of Heavy Metal Accumulation in Cucumber Fruits and Soil in a Greenhouse System with Long-Term Application of Organic Fertilizer and Chemical Fertilizer

Combining organic and chemical fertilizers is a sustainable strategy for vegetable production. However, there is limited research concerning the risks associated with heavy metals (HMs) in greenhouse systems with long-term location application. A three-year investigation, conducted from 2021 to 2023, explored a fifteen-year field experiment with combinations of chemical fertilizer (CH), corn straw (SW) and pig manure (PM). Five treatments were evaluated: excessive fertilization (high CH and PM), conventional fertilization (normal CH), organic–inorganic fertilization (3/4CN + 1/4PN, 2/4CN + 2/4PN and 2/4CN + 1/4PN + 1/4SN). This study evaluated the risks associated with heavy metals (HMs) by analyzing and quantifying their concentrations in soil and cucumber fruits, as well as by calculating the bioconcentration factors (BCFs), the geo-accumulation index (Igeo), and both the non-carcinogenic and carcinogenic risks. The results indicated that excessive fertilization (CF) increased the concentrations of Cu and Zn in fruits, as well as the Igeo values of Cu, Zn, and Cd, and the non-carcinogenic Cu risk, while decreasing the BCFs of Cu and Zn. Organic–inorganic fertilization also elevated the Igeo values of Cu and Zn. Redundancy analyses confirmed a positive correlation between the soil concentrations of Cu and Zn and higher levels of available phosphorus contents (48.4%), alongside a lower pH (4.9%). The concentrations of Cu, Zn, and Cd in both soil and cucumber fruits increased linearly with the duration of application and amount of input. Although the combined application of CH with PM or SW did not significantly elevate the non-carcinogenic or carcinogenic risks associated with most heavy metals, the carcinogenic risks of Cd and As emerged as potential risk factors after 15 years of organic–inorganic fertilization. Utilizing a combination of CH with PM and SW as a fertilizer management strategy can effectively address both the control of heavy metal inputs in the facility and the safety and quality of cucumbers.

Partial substitution of phosphorus fertilizer with iron-modified biochar improves root morphology and yield of peanut under film mulching

IntroductionPeanut production is being increasingly threatened by water stress with the context of global climate change. Film mulching have been reported to alleviate the adverse impact of drought on peanut. Lower phosphorus use efficiency is another key factor limiting peanut yield. Application of iron-modified and phosphorus-loaded biochar (BIP) has been validated to enhance phosphorus utilization efficiency in crops. However, whether combined effect of film mulching and BIP could increase water use efficiency and enhance peanut production through regulating soil properties and root morphologies needs further investigation.MethodsA two-year (2021-2022) pot experiment using a split-plot design was conducted to investigate the effects of phosphorus fertilizer substitution using BIP on soil properties, root morphology, pod yield, and water use of peanut under film mulching. The main plots were two mulching methods, including no mulching (M0) and film mulching (M1). The subplots were four combined applications of phosphorus fertilizer with BIP, including conventional phosphorus fertilizer rates (PCR) without BIP, P1C0; 3/4 PCR with 7.5 t ha-1 BIP, P2C1; 3/4 PCR with 15 t ha-1 BIP, P2C2; 2/3 PCR with 7.5 t ha-1 BIP, P3C1; 2/3 PCR with 15 t ha-1 BIP, P3C2.Results and discussionThe results indicated that regardless of biochar amendments, compared with M0, M1 increased soil organic matter and root morphology of peanut at different growth stages in both years. In addition, M1 increased peanut yield and water use efficiency (WUE) by 18.8% and 51.6%, respectively, but decreased water consumption by 25.0%, compared to M0 (two-year average). Irrespective of film mulching, P2C1 increased length, surface area, and volume of peanut root at seedling by 16.7%, 17.7%, and 18.6%, at flowering by 6.6%, 19.9%, and 29.5%, at pod setting by 22.9%, 33.8%, and 37.3%, and at pod filling by 48.3%, 9.5%, and 38.2%, respectively (two-year average), increased soil pH and organic matter content during peanut growing season, and increased soil CEC at harvest. In general, the M1P2C1 treatment obtained the optimal root morphology, soil chemical properties, WUE, and peanut yield, which increased peanut yield by 33.2% compared to M0P1C0. In conclusion, the combination of film mulching with 7.5 t ha-1 BIP (M1P2C1) effectively improved soil chemical properties, enhanced root morphology of peanut, and ultimately increased peanut yield and WUE.

Chitosan xerogel embedded with green synthesized cerium oxide nanoparticle: An effective controlled release fertilizer for improved cabbage growth

With the growing awareness on the adverse effects of conventional fertilizers; the use of sustainable and controlled release fertilizers has garnered much significance. In the present study, we report the synthesis of chitosan-benzaldehyde Schiff base xerogel incorporated with green synthesized cerium oxide nanoparticle using Psidium guajava leaves extract as a sustainable fertilizer. Spherical CeO2 NPs having an average particle size of 15.3 nm and zeta potential of – 39.9 mV was obtained. The urea-loaded nanocomposite xerogel (CsB@U/CeO2) was examined for cabbage growth. The water retention capacity extended for >2 weeks. A controlled release profile for urea was accomplished from CsB@U/CeO2 for a period extending for 30 days. The kinetics assay suggested that presence of CeO2 NPs asserted a greater role in urea-controlled release from the CsB@U/CeO2 nanocomposite hydrogel owing to polymer relaxation. The growth parameters of cabbages such as head height, diameter, fresh head weight, head circumference was enhanced in plants fertilized by CsB@U/CeO2 as compared to urea. Furthermore, the phenolic content, free radical scavenging activity, protein content, sugar and flavonoid content were also found higher in CsB@U/CeO2 fertilized plants. This study puts forth CsB@U/CeO2 xerogel can be potentially harnessed as an alternative to urea in sustainable agriculture.

Polymer-Modified Fertilizers for Mitigating Strawberry Root Burn

Polymer-modified fertilizers (PMFs) with prolonged nutrient release present a promising solution to address the challenges associated with conventional fertilization practices, particularly for sensitive crops such as strawberries. This study investigates the effectiveness of biodegradable PMFs in maintaining nutrient availability at optimal levels while minimizing root burn and nutrient losses. In a factorial field experiment, we obtaineda total of 3780 sets of parallel measured time series for soil EC, moisture, and temperature as well as two sets of harvest data to evaluate the impact of varying concentrations of polyvinyl alcohol (PVA) on the nutrient release rates from complex NPK fertilizer and monoammonium phosphate. Results indicate that polymer modifications significantly slow down nutrient release, leading to optimal salt levels and maximizing yield while remaining low enough to prevent the risk of root burn (EC of soil solution below 1 mS/cm). Consequently, the application of PMFs enhances strawberry yield surplus (on average 2.8 times in the second harvest) by ensuring a steady supply of nutrients throughout the growing season without inducing stress, which reduces the yield by nearly half. This research provides valuable insights into the development of more effective fertilization strategies for strawberry cultivation and other sensitive crops using PMFs.

Radish and Spinach Seedling Production and Early Growth in Response to Struvite Use as a Phosphorus Source.

To sustain the increasing needs of a rapidly growing population, agriculture has relied on the use of synthetic fertilizers to intensify its production. However, the economical, environmental and health impacts associated with their use have raised significant concerns, especially given the scarcity of phosphorus. Utilizing nutrient-recovered materials like struvite can enhance circularity in agriculture and reduce its reliance on synthetic fertilizers. The objective of this study was to assess the implementation of struvite as a complete substitute to triple superphosphate, for radish and spinach seedling production and early growth, with or without supplementary fertigation. In addition, two rates of struvite were examined (0.68 and 1.37 g L-1 substrate) to evaluate its solubility. In the germination of radish, struvite had similar performance with conventional fertilization, while in spinach, the use of struvite decreased mean germination times. Both plants maintained comparable growth, chlorophyll content and antioxidant capacity when struvite was used, in comparison to conventional fertilizers. However, higher struvite rates under un-fertigated conditions significantly increased the chlorophyll b and total chlorophylls in the spinach, while phenolics and flavonoids decreased, contingent on the fertigation applications. In the radish, struvite maintained similar MDA and H2O2 levels to conventional fertilization, while decreases occurred in the spinach, with the application of ST1 under un-fertigated conditions, compared with conventional fertilization. The P and N contents of the plants were also affected, though these effects varied depending on the plant species, fertigation applications and struvite rates. This variance can be attributed to the characteristics of struvite, the plant species and the cultivation practices. The results of this study suggest that struvite can be successfully implemented in seedling production, establishing significant prospects for its commercialization and use in nurseries.

The impact of combined application of biochar and fertilizer on the biochemical properties of soil in soybean fields.

Heilongjiang Province is a major soybean production area in China. To improve soil structure and increase soybean yield, this study examined the effects of combined biochar and chemical fertilizer application on the biochemical properties of soil in a maize-soybean rotation system. The research were conducted from 2021 to 2022 at Heshan Farm Science Park in Heilongjiang Province, this field plot experiment utilized two soybean varieties, Heihe 43 (a high-protein variety) and Keshan 1 (a high-oil variety). In 2021, two plots with similar fertility levels were selected for planting soybeans and maize. In 2022, a maize-soybean rotation was implemented with five treatments: conventional fertilization (CK), increased biochar+reduced fertilizer 1 (F1+B), reduced fertilizer 1 (F1), increased biochar+reduced fertilizer 2 (F2+B), and reduced fertilizer 2 (F2). The study systematically analyzed the effects of combined biochar and chemical fertilizer application on soil chemical properties and microbial characteristics. Over 2 years, results showed that combined application effectively improved soil chemical traits. Compared to conventional fertilization (CK) and reduced fertilization (F1, F2), t he combined application of biochar and chemical fertilizer (F1+B, F2+B) increased soil pH, EC and the absolute value of zeta potential of soil surface, the CEC of soil significantly increased by 15.6-44.3%, the soil surface charge density and the soil surface charge quantity significantly increased by 16.4-73.5%. The combined application of biochar and chemical fertilizer also effectively enhanced the abundance and diversity of soil microbes. Dominant bacterial groups in soybean field soils under different treatments included Actinobacteria, Acidobacteria, Chloroflexi, and Proteobacteria; while dominant fungal groups were Ascomycota, Basidiomycota, and Mortierellomycota. Alpha and Beta diversity analyses revealed that the F1+B treatment significantly enhanced the species richness and diversity of bacteria and fungi in the soil, increasing the proportion and evenness of dominant and beneficial genera.

Technical and Economic Assessment of Tomato Cultivation Through a Macro-Tunnel Production System with the Application of Gluconacetobacter diazotrophicus

Bacterial inoculants hold promise for enhancing the sustainability and profitability of tomato cultivation in macro-tunnel systems. This study aimed to evaluate the technical and economic viability of applying Gluconacetobacter diazotrophicus to tomato production. The separate addition of native G. diazotrophicus GIBI025 and GIBI029 isolates and a commercial inoculant containing Azotobacter chrococcum and Azospirillium sp. was evaluated at a rate of 1 × 108 CFU·mL−1 without nitrogen addition. Conventional fertilization treatment with no bacteria added and 100%-nitrogen fertilization relative to crop requirements (added as MAP and urea) was also assessed. The treatments were evaluated within the macro-tunnel production system. The experiment utilized a completely randomized block design with four replications per treatment, and each experimental unit consisted of 20 plants. The yield (kg·ha−1) was calculated and economic assessment was performed. The results show that native G. diazotrophicus isolates in tomato cultivation under the macro-tunnel production system improved its economic viability, achieving yields up to 95,501 kg·ha−1 without the addition of nitrogenous fertilizers. This research reveals benefit–cost ratios achieving 1.57 and net incomes reaching 16,707 US dollars per hectare. This work demonstrated that the native isolates assessed may be used in the pursuit of more integrated, sustainable, and competitive cultural practices.

Nutrient Use Efficiency and Cucumber Productivity as a Function of the Nitrogen Fertilization Rate and the Wood Fiber Content in Growing Media.

A peat substrate is made from peat from drained peatlands, which is a limited resource. A realistic estimate is that 50% of the world's wetlands have been lost. Peat is used in horticulture, especially for the cultivation of vegetables in greenhouses. The consequences of peatland exploitation are an increase in the greenhouse effect and a decrease in carbon stocks. Wood fiber can be used as an alternative to peat. The chemical properties of growing media interact and change continuously due to the small volume of growing media, which is limited by the growing container. This study aims to gain new knowledge on the impact of nutrient changes in the microbial degradation of carbon compounds in wood fiber and mixtures with a peat substrate on the content and uptake of nutrients required by plants. The cucumber (Cucumis sativus L.) variety 'Dirigent H' developed in the Netherlands was cultivated in growing media of a peat substrate and wood fiber: (1) peat substrate (PS); (2) wood fiber (WF); (3) wood fiber and peat substrate 50/50 v/v (WF/PS 50/50); (4) wood fiber and peat substrate 25/75 v/v (WF/PS 25/75). The rates of fertilization were the following: (1) conventional fertilization (CF); (2) 13 g N per plant (N13); (3) 23 g N per plant (N23); (4) 30 g N per plant (N30). The experiment was carried out with three replications. As the amount of wood fiber increased, the humidity and pH of the growing media increased. The fertilization of the cucumbers with different quantities of nitrogen influenced the nutrient uptake. The plants grown in the 50/50 and 25/75 growing media had the best Cu uptake when fertilized with N23. When the plants grown in the wood fiber media and the 50/50 media were fertilized with N13, N23, and N30, the Mn content in the growing media at the end of the growing season was significantly lower than the Mn content in the media with conventional fertilization. Thus, nitrogen improved the uptake of Mn by the plants grown not only in the wood fiber, but also in the combinations with a peat substrate. Growing plants in wood fiber and fertilizing them with N13 can result in the optimum uptake of micronutrients. The number and biomass of cucumber fruits per plant were influenced by the amount of wood fiber in the growing media and the application of nitrogen fertilizer. The highest number of fruits and biomass of fruits per plant obtained were significantly higher when the cucumbers were grown in WF/PS 50/50 growing media with additional N13 fertilization.

Comparing the individual and combined effects of nano zinc and conventional zinc fertilization on growth, yield, phytochemical properties, antioxidant activity, and secoisolariciresinol diglucoside content in linseed

Zinc sulfate (ZnSO4), a conventional Zn fertilizer, is widely used due to its high solubility and ease of application. In contrast, nano Zn represents an innovative approach, utilizing nanoscale particles to enhance Zn bioavailability and uptake efficiency. This study compares these two Zn fertilizers regarding their impact on plant growth, yield, Zn uptake, and overall crop quality. In our study, we explored the potential of nano Zn and ZnSO4 by applying two different doses of each (100, 1000 ppm ZnO NP and 30, 50 kg ha−1 ZnSO4) both individually and in combination, to linseed accession. The results obtained showed the potential of nano Zn over conventional Zn fertilizer in terms of enhanced linseed growth and yield together with greater antioxidants enzyme, oil content, protein content, Zn accumulation, secoisolariciresinol diglucoside (SDG) content, and the accumulation of bioactive metabolites. Nanoscale ZnO (with particle size less than 100 nm) at a 1000 ppm concentration sped up growth, yield, increased SDG content, and antioxidant activity. However, when nano Zn (1000 ppm) was applied in combination with ZnSO4 (30 kg ha−1), it maximally enhanced plant fresh and dry weight, photosynthesis, and yield compared to their individual treatment. The combined application increased seed yield by 4.55 folds compared to the control. The treated plants were assessed for SDG content using liquid chromatography-mass spectrometry analysis (LC-MS), which showed maximum increase with 1000 ppm ZnO NP. SDG is a type of lignan known for their antioxidant properties and potential health benefits paving way for its pharmaceutical importance.

Effect of Nano Urea and Nano DAP on Growth, Yield and Nutrient Uptake of Transplanted Rice (Oryza sativa L.)

Foliar nutrition is aimed to eliminate the problems of fixation and immobilization of nutrients. Hence, foliar nutrition is being recognized as a significant way of fertilizing modern agriculture, especially under rainfed conditions. Nano fertilizers because of smaller size and higher surface area are efficient as compared to conventional and produce better results when used in combined form. The experiment was laid out in Randomized complete block design with three replications. A field experiment was conducted in black clayey at Agricultural Research Station, Dhadesugur, during Kharif 2023. There were eight treatment combinations, consisting of different levels of conventional and nano fertilizers. RDF - 150:75:75 kg N:P2O5:K2O ha-1 and 50 % of N, entire P and K were applied as basal and remaining 50 % of N was top dressed at tillering and panicle initiation stage. RNR- 15048 variety of transplanted rice. Application of 50 % Rec. N with soil application + 50 % Rec. N through nano urea with two applications (at tillering and panicle initiation stage) + Rec. P & K with soil application recorded significantly higher number of green leaves, leaf area and leaf area index at harvest (52.7, 954.8 cm2 plant-1 and 4.77, respectively). It also produced higher panicle length (20.1 cm), number of grains panicle-1 (242.3), panicle weight (3.73 g plant-1), test weight (19.1 g) and grain yield (5578 kg ha-1). Nutrient content and uptake also showed higher values for the same treatment. Combined application of conventional and nano fertilizers helped to increase growth, growth attributes like number of leaves, leaf area, leaf area index, yield attributes, yield, nutrient content and nutrient uptake of transplanted rice.

Effect of Fertigation of Water-Soluble Fertilizers on Growth, Yield of Cowpea and Nutrients Availability in Soil under Rice-cowpea Cropping Sequence

A investigation was carried out to study the Growth and yield of cowpea and primary nutrients availability in soil as influenced by fertigation of water-soluble fertilizers under rice-cowpea cropping sequence. Hybrid rice was tested under aerobic condition during Kharif 2015-16 and 2016-17 with 16 treatments replicated thrice in randomized block design. The results indicated that, the treatment, 100% RDF through water soluble fertilizer at 8 DI was recorded significantly higher growth and yield determinants, higher seed yield (12.94 q ha-1) and haulm yield (26.17 q ha-1) of cowpea. Significant higher organic carbon (0.57 %) was recorded with the application 100% STCR dose with WSF through fertigation at 8 DI and higher available N (146.38 kg N ha-1 ), P2O5 (122.67 kg P2O5 ha-1 ) and K2O (130.17 kg K2O ha-1 ) content in soil recorded 100% water soluble fertilizers (WSF) applied at 4 DI. However, exchangeable calcium [3.51 cmol (p+) kg-1], magnesium [2.55 cmol (p+) kg-1], available sulphur [12.50 ppm] in soil were recorded with 100% conventional fertilizers applied plots through PoP. Significantly higher DTPA extractable Fe (18.45 mg kg-1) noticed with 100% STCR of WSF at 8 DI. However, significantly higher DTPA extractable Zn (1.44 mg kg-1) and Cu (0.57 mg kg-1) was recorded with the application of 100% RDF with WSF at 4 DI. Significantly higher DTPA extractable Mn (22.78 mg kg-1) noticed with 100% STCR of WSF at 4 DI.

Efficacy of Green and Chemically Synthesized Nano Boron Nitride on Sunflower Germination

ABSTRACTThis study explores the eco‐friendly synthesis of nanoparticles using natural sources, specifically employing Cassia fistula leaf extract for the production of boron nitride nanoparticles. Characterization of the synthesized nanoparticles was performed using Raman spectroscopy and UV‐visible spectroscopy to identify functional groups. Ab initio studies were conducted to investigate the electronic properties of the boron nitride nanostructures. The structural analysis through powder x‐ray diffraction confirmed a hexagonal configuration of the nanoparticles. Scanning electron microscopy and transmission electron microscopy revealed particle sizes below 100 nm. Laboratory experiments demonstrated that sunflower seeds treated with 1500 ppm of green‐synthesized nano boron nitride achieved the highest germination rate of 98.2%, surpassing other concentrations and chemically synthesized nanoparticles, which reached 93.9% at 2000 ppm. The control treatment yielded a germination rate of 76.2%. The eco‐friendly synthesized nanoparticles exhibited superior efficacy compared to both chemically synthesized nanoparticles and conventional fertilizers.

Exploring the use of POLY4 for the improvement of productivity, peanut quality, and soil properties in Southern India.

Polyhalite-based POLY4, a multi-nutrient source containing potassium, calcium, magnesium, and sulphur, is increasingly recognised for its potential to improve crop yields and soil health in agricultural systems. It is also been considered as a feasible approach for addressing the deficiency in potassium, calcium, and sulphur within a single application source. The present study aimed to investigate the impact of polyhalite-based POLY4 application, either as a complete or partial substitute for traditional potassium fertiliser and gypsum supplement, on the improvement of peanut (Arachis hypogaea) growth and soil quality. An extensive field study was conducted from 2021 and 2022, employing ten distinct nutrient management treatments with three replications in a randomised complete block design. The findings of the study indicated that the application of polyhalite (POLY4) in conjunction with only NP fertilisers resulted in a higher yield advantage (approximately 150-200 kg ha-1) than in plots treated with NPK + gypsum (at 500 kg ha-1) and control plots. The application of polyhalite-based fertiliser (POLY4) at a rate that was 100% equivalent to K along with NP fertilisers resulted in a significant increase in pod yield (5.3-12.8%) over NPK + gypsum and control plots. Thus, the increased crop yield led to an increase in gross returns of 4.88% and in net returns of 4.28% with the application of POLY4 (100%) + NP fertilisers over other treatments. Likewise, variable rates of conventional fertilisers along with POLY4 (100% recommended) + NP + gypsum at 310 kg/ha significantly increased the linoleic acid content (38.5%), oleic acid content, and oil content (48.1%) by reducing palmitic acid (11.96%) content in the groundnut seed. Interestingly, POLY4 use at the 50% recommended rate also resulted in yields that were comparable with those obtained with 100% NPK. Therefore, applying POLY4, a polyhalite fertiliser, in either a 100% or 50% equivalent of essential K can be an effective way of increasing the production of peanut crops and promoting agricultural sustainability.

Nitrogen source regulates soil nitrification and nitrogen losses more than nitrification inhibitor and herbicide: A laboratory evaluation

AbstractIncreased environmental nitrogen (N) losses have prompted the use of enhanced efficiency nitrogen fertilizers, including nitrification inhibitors. However, the comparative effects of nitrification inhibitors with conventional nitrogen fertilizers and herbicides on soil nitrification and nitrogen losses remain poorly understood. This study evaluated the impact of a nitrification inhibitor (Instinct NXTGEN), two nitrogen sources (broadcast urea vs. injected aqueous ammonia), and a preemergence herbicide (Acuron) on (1) soil nitrification through a 25‐day soil incubation experiment and (2) NH3 volatilization, NO3‐N leaching, and N2O‐N emissions through a 31‐day soil column study in loamy sand soil. In both experiments, treatments included combinations of nitrification inhibitor versus no inhibitor, two nitrogen sources, and preemergence herbicide versus no herbicide. Results revealed that nitrogen source significantly influenced nitrification, with injected aqueous ammonia reducing nitrification by 33% compared to surface broadcast urea. Nitrification inhibitors and herbicide had no effect on soil nitrification. Injected aqueous ammonia reduced NH3 volatilization by 87% compared to surface broadcast urea, but the effect of the nitrification inhibitor on NH3 volatilization was inconsistent across both nitrogen sources. Injected aqueous ammonia led to 39% higher cumulative nitrogen (NO3‐N + NH4‐N) leaching than urea, while the nitrification inhibitor had an inconsistent effect on NO3‐N leaching across both nitrogen sources. No significant differences in N2O‐N emissions were observed among treatments, and the herbicide had no effect on any measured parameters. These findings suggest that nitrogen source plays a more critical role in regulating soil nitrogen losses than nitrification inhibitors or herbicides.

Biochar-boron composites: synthesis, properties and agronomic effectiveness for eucalyptus seedlings

IntroductionBoron (B) is critical for plant growth, yet its movement in soil is often hindered by leaching and adsorption, leading to deficiencies. Tackling these issues is essential for boosting agricultural productivity, especially in plants like Eucalyptus with high B needs. This paper aims to address these challenges by evaluating B-doped biochar composites (biochar-B) that enhance B distribution and stability in the soil, focusing on Eucalyptus grandis cultivation in two distinct oxisol types.Materials and methodsBiochar-B composites were created using shrimp carcass (FSC), chicken manure (FCM) and sewage sludge (FSS), combined with boric acid (BA) and borax (BX), and pyrolyzed at 300 °C and 550 °C. The experimental design was a completely randomized design (CRD) with three replicates.ResultsFourier transform infrared spectroscopy (FTIR) analysis confirmed successful B integration and interaction with organic matrices, highlighting functional groups responsible for composite properties. This facilitated the development of highly predictive partial least squares (PLS) regression models (R2pred ~ 0.8). The FSC-BA composite at 300 °C showed notable thermal stability, B retention and availability, enhancing B release kinetics.DiscussionThese findings emphasize the importance of considering the soluble B rate in composite applications for Eucalyptus cultivation. The use of these composites provides a sustainable method for gradual B release, potentially outperforming conventional fertilization techniques. This approach may lead to improved plant growth and productivity. Further field investigations are recommended in order to validate these findings and refine sustainable fertilization strategies; thus, benefiting a range of crops.Graphical abstract

LCCO2 Assessment and Fertilizer Production from Absorbed-CO2 Solid Matter in a Small-Scale DACCU Plant

This study investigates a novel method of utilizing Direct Air Capture (DAC) technology for fertilizer production. Unlike traditional Direct Air Carbon Capture and Utilization (DACCU) technologies, Direct Air Carbon Capture for Fertilizers (FDAC) has the potential to produce fertilizers directly. This study aims to assess the feasibility of FDAC-based fertilizer production by examining the current state of traditional DAC technologies, evaluating the CO2 fixation potential of FDAC, and analyzing the decarbonization effect of producing fertilizers using FDAC. Our evaluation results indicate that CO2 emissions from producing 1 ton of conventional chemical fertilizer, FDAC fertilizer (current status), FDAC fertilizer with ingredient adjustment (sodium hydroxide), and FDAC fertilizer with ingredient adjustment (magnesium hydroxide) are 1.69, 1.12, 1.04, and 1.06 tons of CO2, respectively. The FDAC fertilizer (current status) emits 0.57 tons of CO2 per ton less than commercial fertilizers. FDAC fertilizers also have the potential to reduce CO2 emissions further when the fertilizer composition is adjusted, offering a promising solution for lowering the environmental impact of fertilizer production. Significant CO2 reduction can be expected by replacing conventional low-intensity chemical fertilizers with FDAC-produced fertilizers.

Biochar-based fertilizers from co-pyrolysis of algae and hazelnut shell with triple superphosphate: Physicochemical properties and slow release performance.

Phosphorus (P) is a vital nutrient for plant growth and food production. Excessive amounts of P fertilizers to a greater extent of crop P offtake are inevitably applied due to low utilization efficiency, causing environmental pollution. This study aimed to evaluate biochar-based fertilizers (BBFs) produced by co-pyrolyzing algae (A) and hazelnut shell (H) biomasses with triple superphosphate (TSP) at a ratio of 4:1 (w/w). The potential of the slow-release performance of BBFs was studied during kinetics experiments. The co-pyrolysis of biomasses with TSP yielded BBFs with significantly different properties, including electrical conductivity, pH, elemental ratios, functional groups, specific surface area and pore size characteristics. Phosphorus release from all biochars and BBFs followed the Elovich model, except for TSP and H+TSP. Kinetic studies revealed prolonged P-release times and slower release rates for BBFs compared to conventional TSP. So that, TSP released 100% of the total P, whereas H+TSP and A+TSP biochars released only 3.14% and 5.14% of the total P, respectively, during a 240-hour experiment. The slow-release performance of BBFs suggests their potential as promising alternatives to conventional phosphate fertilizers. BBFs have the potential to enhance P utilization efficiency, increase crop yield and mitigate the environmental impact of P fertilizer runoff.

Irrigation Regime Optimization Plays a Critically Important Role in Plastic-Shed Vegetable Production to Mitigate Short-Term and Future N Leaching Pollution

In northern China, plastic-shed vegetable production significantly contributes to nitrogen (N)-induced groundwater eutrophication due to excessive fertilization and irrigation. However, the impact of optimized farming practices on N leaching has seldom been systematically examined. We conducted a four-season field study to evaluate the impacts of optimal farming measures on tomato yield, water percolation, N concentration in leachate, and total N (TN) leaching. The treatments included conventional fertilization and flood irrigation (CON), fertilization decreased by 20% and flood irrigation (OPT1) or drip fertigation (OPT2), fertilization decreased by 30% and drip fertigation (OPT3), and no fertilization with flood irrigation (CK). Compared with the CON treatment, the optimal treatments significantly reduced annual TN leaching by 9.92–50.7% without affecting tomato yield (57.1–98.2 t ha−1 for CON and 48.1–106 t ha−1 for three optimal treatments). Drip irrigation contributed 73.8–79.0% to the mitigation of TN leaching. The N originating from soil and irrigation water exhibited a similar contribution to TN leaching (45.4–58.6%) to that of fertilizer N. The daily TN leaching at the basal fertilization stage was much greater than that at the top-dressing stage, due to over-fertilization. Optimizing fertilization, particularly basal fertilization, in combination with drip irrigation could substantially reduce N leaching in plastic-shed vegetable production. Other optimal practices, such as decision support systems (DSSs) and fertilizer amendments, could also be investigated to further mitigate the N leaching.