Conventional Confocal Microscopy Research Articles

Loss of Tight Junction Protein Claudin 18 Promotes Progressive Neoplasia Development in Mouse Stomach

Loss of claudin 18 (CLDN18), a membrane-spanning tight junction protein, occurs during early stages of development of gastric cancer and associates with shorter survival times of patients. We investigated whether loss of CLDN18 occurs in mice that develop intraepithelial neoplasia with invasive glands due to infection with Helicobacter pylori, and whether loss is sufficient to promote the development of similar lesions in mice with or without H pylori infection. We performed immunohistochemical analyses in levels of CLDN18 in archived tissues from B6:129 mice infected with H pylori for 6 to 15 months. We analyzed gastric tissues from B6:129S5-Cldn18tm1Lex/Mmucd mice, in which the CLDN18 gene was disrupted in gastric tissues (CLDN18-knockout mice), or from control mice with a full-length CLDN18 gene (CLDN18+/+; B6:129S5/SvEvBrd) or heterozygous disruption of CLDN18 (CLDN18+/-; B6:129S5/SvEvBrd) that were infected with H pylori SS1 or PMSS1 at 6 weeks of age and tissues collected for analysis at 20 and 30 weeks after infection. Tissues from CLDN18-knockout mice and control mice with full-length CLDN18 gene expression were also analyzed without infection at 7 weeks and 2 years after birth. Tissues from control and CLDN18-knockout mice were analyzed by electron microscopy, stained by conventional methods and analyzed for histopathology, prepared by laser capture microdissection and analyzed by RNAseq, and immunostained for lineage markers, proliferation markers, and stem cell markers and analyzed by super-resolution or conventional confocal microscopy. CLDN18 had a basolateral rather than apical tight junction localization in gastric epithelial cells. B6:129 mice infected with H pylori, which developed intraepithelial neoplasia with invasive glands, had increasing levels of CLDN18 loss over time compared with uninfected mice. In B6:129 mice infected with H pylori compared with uninfected mice, CLDN18 was first lost from most gastric glands followed by disrupted and reduced expression in the gastric neck and in surface cells. Gastric tissues from CLDN18-knockout mice had low levels of inflammation but increased cell proliferation, expressed markers of intestinalized proliferative spasmolytic polypeptide-expressing metaplasia, and had defects in signaltransduction pathways including p53 and STAT signaling by 7 weeks after birth compared with full-length CLDN18 gene control mice. By 20 to 30 weeks after birth, gastric tissues from uninfected CLDN18-knockout mice developed intraepithelial neoplasia that invaded the submucosa; by 2 years, gastric tissues contained large and focally dysplastic polypoid tumors with invasive glands that invaded the serosa. H pylori infection of B6:129 mice reduced the expression of CLDN18 early in gastric cancer progression, similar to previous observations from human gastric tissues. CLDN18 regulates cell lineage differentiation and cellular signaling in mouse stomach; CLDN18-knockout mice develop intraepithelial neoplasia and then large and focally dysplastic polypoid tumors in the absence of H pylori infection.

Chromatic confocal microscopy to rapidly reveal nanoscale surface/interface topography by position-sensitive detection

This paper presents a confocal microscope for the rapid and noninvasive capture of three-dimensional (3D) images showing the surface/interface topography in a far-field configuration. The proposed microscope features a nanoscale optical ruler capable of performing fast depth measurements based on the chromatic aberration of microscope objectives. A diffraction grating and a position-sensitive detector were used to extract the spectral shift, which directly maps the height of the surface with a nanoscale resolution. Because neither the mechanical scanning nor the spectrometer, which limit the speed of 3D imaging, are needed in the axial direction, full 3D surface topography images with nanoscale depth resolution can be acquired rapidly using the nanoscale optical ruler in conjunction with 2D lateral beam scanning. The presented technique overcomes the limitation of the detection speed of conventional chromatic confocal microscopy. In experiments, the 3D static and dynamic nanoscale surface profiles of several representative optoelectronic and electronic devices were demonstrated. This fast and non-invasive approach with nanoscale depth resolution to the measurement of topography images has considerable promise in academic research and industrial applications.

Dual-axis confocal microscopy for point-of-care pathology.

Dual-axis confocal (DAC) microscopy is an optical imaging modality that utilizes simple low-numerical aperture (NA) lenses to achieve effective optical sectioning and superior image contrast in biological tissues. The unique architecture of DAC microscopy also provides some advantages for miniaturization, facilitating the development of endoscopic and handheld DAC systems for in vivo imaging. This article reviews the principles of DAC microscopy, including its differences from conventional confocal microscopy, and surveys several variations of DAC microscopy that have been developed and investigated as non-invasive real-time alternatives to conventional biopsy and histopathology.

Calibration-free In Vitro Quantification of Protein Homo-oligomerization Using Commercial Instrumentation and Free, Open Source Brightness Analysis Software.

Number and brightness is a calibration-free fluorescence fluctuation spectroscopy (FFS) technique for detecting protein homo-oligomerization. It can be employed using a conventional confocal microscope equipped with digital detectors. A protocol for the use of the technique in vitro is shown by means of a use case where number and brightness can be seen to accurately quantify the oligomeric state of mVenus-labelled FKBP12F36V before and after the addition of the dimerizing drug AP20187. The importance of using the correct microscope acquisition parameters and the correct data preprocessing and analysis methods are discussed. In particular, the importance of the choice of photobleaching correction is stressed. This inexpensive method can be employed to study protein-protein interactions in many biological contexts.

Geometry Measurement of Submerged Metallic Micro-Parts Using Confocal Fluorescence Microscopy

The in situ geometry measurement of microstructures in the laser chemical machining (LCM) manufacturing process places high demands on measurement systems because the specimen is submerged in a closed fluid circuit. The steep slopes of the manufactured micro-components and the general lack of accessibility hinder the use of standard techniques such as tactile measurement or conventional confocal microscopy. A technique based on confocal fluorescence microscopy shows promise for increasing the measurability on metallic surfaces with large curvatures. By applying an intensely scattering fluorescent coating to the specimen, the surface position can be determined by the change in fluorescence signal at the boundary between specimen and coating. In contrast to the currently tested thin coatings ( $$< 100\, \upmu \hbox {m}$$ ) the measurements in layers thicker than $$ 1\, \hbox {mm}$$ , as required for in situ application at the LCM process, show distinct dependencies on the fluorescent medium in terms of concentration and index of refraction. Hence, a fundamentally different signal evaluation approach based on a physical model of the fluorescence signal is needed to extract the surface position information from the detected fluorescence intensity signal. For the purpose of validation, the measurement of a step geometry is performed under the condition of a thick fluid layer and referenced with a tactile measurement. As a result, the model-based approach is shown to be suitable to detect the geometry parameter step height with an uncertainty of $$ 8.8\, \upmu \hbox {m}$$ for a step submerged in a fluid layer with a thickness of $$2.3\, \hbox {mm}$$ .

Background suppression in confocal scanning fluorescence microscopy with superoscillations

In this paper, we propose a simple, novel method to suppress background noise in confocal scanning fluorescence microscopy images with superoscillations. The proposed method retains high resolution, while completely removing superoscillation sidebands. Simulations of images from conventional confocal scanning microscopy, superoscillations, and the proposed method are presented, demonstrating its effectiveness.

2507 A novel multi-photon microscopy method for neuronavigation in deep brain stimulation surgery

OBJECTIVES/SPECIFIC AIMS: The goal for this project is to determine the feasibility of using a novel multi-photon fiber-coupled microscope to aid surgeons in localizing STN during surgeries. In order to accomplish this goal, we needed to identify the source of a strong autofluorescent signal in the STN and determine whether we could use image classification methods to automatically distinguish STN from surrounding brain regions. METHODS/STUDY POPULATION: We acquired 3 cadaveric brains from the University of Colorado Anschutz Medical Campus, Department of Pathology. Two of these brains were non-PD controls whereas 1 was diagnosed with PD. We dissected a 10 square centimeter region of midbrain surrounding STN, then prepared this tissue for slicing on a vibratome or cryostat. Samples were immuno-labeled for various cellular markers for identification, or left unlabeled in order to observe the autofluorescence for image classification. RESULTS/ANTICIPATED RESULTS: The border of STN is clearly visible based on the density of a strong autofluorescent signal. The autofluorescent signal is visible using 2-photon (850–1040 nm excitation) and conventional confocal microscopy (488–647 nm excitation). We were also able to visualize blood vessels with second harmonic generation. The autofluorescent signal is quenched by high concentrations of Sudan-black B (0.5%–5%), and is primarily localized in microtubule-associated protein-2 (MAP2)+ cells, indicating that it is likely lipofuscin accumulation in neurons. Smaller lipofuscin particles also accumulate in microglia, identified based on ionized calcium binding adopter 1 (Iba1)+ labeling. We anticipate that colocalization analysis will confirm these qualitative observations. Using 2-photon images of the endogenous autofluorescent signal in these samples, we trained a logistic regression-based image classifier using features derived from gray-level co-occurrence matrices. Preliminary testing indicates that our classifier performed well, with a mean accuracy of 0.89 (standard deviation of 0.11) and a Cohen’s Kappa value of 0.76 (standard deviation of 0.24). We are currently using coherent anti-Stokes Raman scattering and third harmonic imaging to identify different features of myelin that can be used to distinguish between these regions and expect similar results. DISCUSSION/SIGNIFICANCE OF IMPACT: Traditional methods for localizing STN during DBS surgery include the use of stereotactic coordinates and multi-electrode recording (MER) during implantation. MERs are incredibly useful in DBS surgeries, but require penetration of brain structures in order to infer location. Using multi-photon microscopy techniques to aid identification of STN during DBS surgeries offers a number of advantages over traditional methods. For example, blood vessels can be clearly identified with second harmonic generation, something that is not possible with MER. Multi-photon microscopy also allows visualization deep into tissue without actually penetrating it. This ability to look within a depth of field is useful for detection of STN borders based on autofluorescent cell density. When combined with traditional stereotactic information, our preliminary image classification methods are a fast, reliable way to provide surgeons with extra information concerning their location in the midbrain. We anticipate that future advancements and refinements to our image classifier will only increase accuracy and the potential applications and value. In summary, these preliminary data support the feasibility of multi-photon microscopy to aid in the identification of target brain regions during DBS surgeries. The techniques described here complement and enhance current stereotactic and electrophysiological methods for DBS surgeries.

Resolution enhancement of confocal scanning microscopy using low-intensity imaging part of point spread function

We introduce a phase mask with a left-handed azimuthal polarization to generate a special shape of point spread function. The proposed point spread function has low-intensity and small size in the central lobe. This central lobe of the point spread function is used to obtain an image on the detector, and therefore the lateral resolution is improved. The proposed method can achieve a remarkable improvement in the lateral resolution and the depth of field compared with conventional confocal scanning microscopy. The image simulation demonstrated that the images obtained by this proposed method have better imaging quality.

Improved axial point spread function in a two-frequency laser scanning confocal fluorescence microscope.

A two-frequency laser scanning confocal fluorescence microscope (TF-LSCFM) based on intensity modulated fluorescence signal detection was proposed. The specimen-induced spherical aberration and scattering effect were suppressed intrinsically, and high image contrast was presented due to heterodyne interference. An improved axial point spread function in a TF-LSCFM compared with a conventional laser scanning confocal fluorescence microscope was demonstrated and discussed.

The Use of Intravital Two-Photon and Thick Section Confocal Imaging to Analyze B Lymphocyte Trafficking in Lymph Nodes and Spleen.

Intravital two-photon laser scanning microscopy (TP-LSM) has allowed the direct observation of immune cells in intact organs of living animals. In the B cell biology field TP-LSM has detailed the movement of B cells in high endothelial venules and during their transmigration into lymph organs; described the movement and positioning of B cells within lymphoid organs; outlined the mechanisms by which antigen is delivered to B cells; observed B cell interacting with T cells, other cell types, and even with pathogens; and delineated the egress of B cells from the lymph node (LN) parenchyma into the efferent lymphatics. As the quality of TP-LSM improves and as new fluorescent probes become available additional insights into B cell behavior and function await new investigations. Yet intravital TP-LSM has some disadvantages including a lower resolution than standard confocal microscopy, a narrow imaging window, and a shallow depth of imaging. We have found that supplementing intravital TP-LSM with conventional confocal microscopy using thick LN sections helps to overcome some of these shortcomings. Here, we describe procedures for visualizing the behavior and trafficking of fluorescently labeled, adoptively transferred antigen-activated B cells within the inguinal LN of live mice using two-photon microscopy. Also, we introduce procedures for fixed thick section imaging using standard confocal microscopy, which allows imaging of fluorescently labeled cells deep in the LN cortex and in the spleen with high resolution.

Multipoint scanning dual-detection confocal microscopy for fast 3D volumetric measurement.

We propose a multipoint scanning dual-detection confocal microscopy (MS-DDCM) system for fast 3D volumetric measurements. Unlike conventional confocal microscopy, MS-DDCM can accomplish surface profiling without axial scanning. Also, to rapidly obtain 2D images, the MS-DDCM employs a multipoint scanning technique, with a digital micromirror device used to produce arrays of effective pinholes, which are then scanned. The MS-DDCM is composed of two CCDs: one collects the conjugate images and the other collects nonconjugate images. The ratio of the axial response curves, measured by the two detectors, provides a linear relationship between the height of the sample surface and the ratio of the intensity signals. Furthermore, the difference between the two images results in enhanced contrast. The normalising effect of the MS-DDCM provides accurate sample heights, even when the reflectance distribution of the surface varies. Experimental results confirmed that the MS-DDCM achieved high-speed surface profiling with improved image contrast capability.

Axially-confined invivo single-cell labeling by primed conversion using blue and red lasers with conventional confocal microscopes.

Green-to-red photoconvertible fluorescent proteins have been found to undergo efficient photoconversion by a new method termed primed conversion that uses dual wave-length illumination with blue and red/near-infrared light. By modifying a confocal laser-scanning microscope (CLSM) such that two laser beams only meet at the focal plane, confined photoconversion at the axial dimension has been achieved. The necessity of this custom modification to the CLSM, however, has precluded the wide-spread use of this method. Here, we investigated whether spatially-restricted primed conversion could be achieved with CLSM without any hardware modification. We found that the primed conversion of Dendra2 using a conventional CLSM with two visible lasers (473nm and 635nm) and a high NA objective lens (NA, 1.30) resulted in dramatic restriction of photoconversion volume: half-width half-maximum for the axial dimension was below 5μm, which is comparable to the outcome of the original method that used the microscope modification. As a proof of this method's effectiveness, we used this technique in living zebrafish embryos and succeeded in revealing the complex anatomy of individual neurons packed between neighboring cells. Because unmodified CLSMs are widely available, this method can be widely applicable for labeling cells with single-cell resolution.

Validation of an easily applicable three-dimensional immunohistochemical imaging method for a mouse brain using conventional confocal microscopy.

Histological analysis has been largely confined to two-dimensional analysis of thin tissue sections, hampering detailed understanding of three-dimensional cellular distribution in biological tissues. Tissue optical clearing methods enable three-dimensional histological analysis by rendering tissues transparent and suitable for microscopic detection of the fluorescent signals inside. Despite their great potential in histological research, the tissue clearing methods are not readily accessible to many researchers because of hazardous chemicals, complicated protocols and advanced microscopy. Furthermore, poor antibody penetration represents an additional major obstacle when performing three-dimensional immunohistochemical studies. Here, we have examined tissue optical clearing of a mouse brain slice by a non-hazardous aqueous solution, ScaleA2. We modified the ScaleA2 solution by increasing the concentration of detergent. A simple immersion in the modified ScaleA2 solution alone enabled highly intense and uniform immunolabeling into deep tissues in three-dimensional immunostaining. Conventional confocal microscopy could image three-dimensional immunostaining of vasculature and astrocytes with fine processes to 1mm imaging depth. Collectively, our technically straightforward clearing method will facilitate the common application of three-dimensional immunohistochemical analysis in many research fields including neuroscience, expanding our understanding of the detailed spatial cellular distribution underlying the physiology and pathology.

High resolution, high speed, long working distance, large field of view confocal fluorescence microscope

Confocal fluorescence microscopy is often used in brain imaging experiments, however conventional confocal microscopes are limited in their field of view, working distance, and speed for high resolution imaging. We report here the development of a novel high resolution, high speed, long working distance, and large field of view confocal fluorescence microscope (H2L2-CFM) with the capability of multi-region and multifocal imaging. To demonstrate the concept, a 0.5 numerical aperture (NA) confocal fluorescence microscope is prototyped with a 3 mm × 3 mm field of view and 12 mm working distance, an array of 9 beams is scanned over the field of view in 9 different regions to speed up the acquisition time by a factor of 9. We test this custom designed confocal fluorescence microscope for future use with brain clarification methods to image large volumes of the brain at subcellular resolution. This multi-region and multi-spot imaging method can be used in other imaging modalities, such as multiphoton microscopes, and the field of view can be extended well beyond 12 mm × 12 mm.

Rapid nonlinear image scanning microscopy

Image scanning microscopy (ISM) doubles the resolution of a conventional confocal microscope for super-resolution imaging. Here, we describe an all-optical ISM design based on rescanning microscopy for two-photon-excited fluorescence and second-harmonic generation that allows straightforward implementation into existing microscopes. The design offers improved sensitivity and high frame rates relative to those of existing systems. We demonstrate its utility using fixed and living specimens as well as collagen hydrogels.

Eyelid skin as a potential site for drug delivery to conjunctiva and ocular tissues

The feasibility of topical application onto the (lower) eyelid skin to deliver hydrophilic and lipophilic compounds into the conjunctiva and ocular tissues was evaluated by comparing with conventional eye drop application. Skin permeation and the concentration of several model compounds, and skin impedance were determined utilizing eyelid skin from hairless rats, as well as abdominal skin in the same animals for comparison. In vitro static diffusion cells were used to assess the skin permeation in order to provide key insights into the relationship between the skin sites and drugs. The obtained results revealed that drug permeation through the eyelid skin was much higher than that through abdominal skin regardless of the drug lipophilicity. Specifically, diclofenac sodium salt and tranilast exhibited approximately 6-fold and 11-fold higher permeability coefficients, respectively, through eyelid skin compared with abdominal skin. Histomorphological evaluation and in vivo distribution of model fluorescent dyes were also examined in the conjunctiva and skin after eyelid administration by conventional microscope and confocal laser scanning microscope analyses. The result revealed that eyelid skin has a thinner stratum corneum, thereby showing lower impedance, which could be the reason for the higher drug permeation through eyelid skin. Comparative evaluation of lipophilic and hydrophilic model compounds administered via the eyelid skin over 8h revealed stronger fluorescence intensity in the skin and surrounding tissues compared with eye drop administration. These results suggested that the (lower) eyelid skin is valuable as a prospective site for ophthalmic medicines.

Optimized processing and analysis of conventional confocal microscopy generated scanning FCS data.

Scanning Fluorescence Correlation Spectroscopy (scanning FCS) is a variant of conventional point FCS that allows molecular diffusion at multiple locations to be measured simultaneously. It enables disclosure of potential spatial heterogeneity in molecular diffusion dynamics and also the acquisition of a large amount of FCS data at the same time, providing large statistical accuracy. Here, we optimize the processing and analysis of these large-scale acquired sets of FCS data. On one hand we present FoCuS-scan, scanning FCS software that provides an end-to-end solution for processing and analysing scanning data acquired on commercial turnkey confocal systems. On the other hand, we provide a thorough characterisation of large-scale scanning FCS data over its intended time-scales and applications and propose a unique solution for the bias and variance observed when studying slowly diffusing species. Our manuscript enables researchers to straightforwardly utilise scanning FCS as a powerful technique for measuring diffusion across a broad range of physiologically relevant length scales without specialised hardware or expensive software.

Three-dimensional measurement of chloroplast with degenerate four-wave mixing nonlinear confocal microscope

ABSTRACTWe report new confocal microscopy using degenerate four-wave mixing (DFWM) geometry for three-dimensional measurement of biological samples. DFWM nonlinear confocal microscope that applies phase conjugate (PC) wave to the conventional confocal microscope obtains optical resonant properties of the focal region. As a result, the microscope provides three-dimensional image of biological samples with high spatial resolution.

Quantitative Localization of a Golgi Protein by Imaging Its Center of Fluorescence Mass.

The Golgi complex consists of serially stacked membrane cisternae which can be further categorized into sub-Golgi regions, including the cis-Golgi, medial-Golgi, trans-Golgi and trans-Golgi network. Cellular functions of the Golgi are determined by the characteristic distribution of its resident proteins. The spatial resolution of conventional light microscopy is too low to resolve sub-Golgi structure or cisternae. Thus, the immuno-gold electron microscopy is a method of choice to localize a protein at the sub-Golgi level. However, the technique and instrument are beyond the capability of most cell biology labs. We describe here our recently developed super-resolution method called Golgi protein localization by imaging centers of mass (GLIM) to systematically and quantitatively localize a Golgi protein. GLIM is based on standard fluorescence labeling protocols and conventional wide-field or confocal microscopes. It involves the calibration of chromatic-shift aberration of the microscopic system, the image acquisition and the post-acquisition analysis. The sub-Golgi localization of a test protein is quantitatively expressed as the localization quotient. There are four main advantages of GLIM; it is rapid, based on conventional methods and tools, the localization result is quantitative, and it affords ~ 30 nm practical resolution along the Golgi axis. Here we describe the detailed protocol of GLIM to localize a test Golgi protein.

Super-resolved linear fluorescence localization microscopy using photostable fluorophores: A virtual microscopy study

Current approaches to overcome the conventional limit of the resolution potential of light microscopy (of about 200 nm for visible light), often suffer from non-linear effects, which render the quantification of the image intensities in the reconstructions difficult, and also affect the quantification of the biological structure under investigation. As an attempt to face these difficulties, we discuss a particular method of localization microscopy which is based on photostable fluorescent dyes. The proposed method can potentially be implemented as a fast alternative for quantitative localization microscopy, circumventing the need for the acquisition of thousands of image frames and complex, highly dye-specific imaging buffers. Although the need for calibration remains in order to extract quantitative data (such as the number of emitters), multispectral approaches are largely facilitated due to the much less stringent requirements on imaging buffers. Furthermore, multispectral acquisitions can be readily obtained using commercial instrumentation such as e.g. the conventional confocal laser scanning microscope.