Controlled Polymerization Techniques Research Articles

Chromatographic Separation: A Versatile Strategy to Prepare Discrete and Well-Defined Polymer Libraries.

ConspectusThe preparation of discrete and well-defined polymers is an emerging strategy for emulating the remarkable precision achieved by macromolecular synthesis in nature. Although modern controlled polymerization techniques have unlocked access to a cornucopia of materials spanning a broad range of monomers, molecular weights, and architectures, the word "controlled" is not to be confused with "perfect". Indeed, even the highest-fidelity polymerization techniques─yielding molar mass dispersities in the vicinity of Đ = 1.05─unavoidably create a considerable degree of structural and/or compositional dispersity due to the statistical nature of chain growth. Such dispersity impacts many of the properties that researchers seek to control in the design of soft materials.The development of strategies to minimize or entirely eliminate dispersity and access molecularly precise polymers therefore remains a key contemporary challenge. While significant advances have been made in the realm of iterative synthetic methods that construct oligomers with an exact molecular weight, head-to-tail connectivity, and even stereochemistry via small-molecule organic chemistry, as the word "iterative" suggests, these techniques involve manually propagating monomers one reaction at a time, often with intervening protection and deprotection steps. As a result, these strategies are time-consuming, difficult to scale, and remain limited to lower molecular weights. The focus of this Account is on an alternative strategy that is more accessible to the general scientific community because of its simplicity, versatility, and affordability: chromatography. Researchers unfamiliar with the intricacies of synthesis may recall being exposed to chromatography in an undergraduate chemistry lab. This operationally simple, yet remarkably powerful, technique is most commonly encountered in the purification of small molecules through their selective (differential) adsorption to a column packed with a low-cost stationary phase, usually silica. Because the requisite equipment is readily available and the actual separation takes little time (on the order of 1 h), chromatography is used extensively in small-molecule chemistry throughout industry and academia alike. It is, therefore, perhaps surprising that similar types of chromatography are not more widely leveraged in the field of polymer science as well.Here, we discuss recent advances in using chromatography to control the structure and properties of polymeric materials. Emphasis is placed on the utility of an adsorption-based mechanism that separates polymers based on polarity and composition at tractable (gram) scales for materials science, in contrast to size exclusion, which is extremely common but typically analyzes very small quantities of a sample (∼1 mg) and is limited to separating by molar mass. Key concepts that are highlighted include (1) the separation of low-molecular-weight homopolymers into discrete oligomers (Đ = 1.0) with precise chain lengths and (2) the efficient fractionation of block copolymers into high-quality and widely varied libraries for accelerating materials discovery. In summary, the authors hope to convey the exciting possibilities in polymer science afforded by chromatography as a scalable, versatile, and even automated technique that unlocks new avenues of exploration into well-defined materials for a diverse assortment of researchers with different training and expertise.

Study of uricase-polynorbornene conjugates derived from grafting-from ring-opening metathesis polymerization.

PEGylation has been the 'gold standard' in bioconjugation due to its ability to improve the pharmacokinetics and pharmacodynamics of native proteins. However, growing clinical evidence of hypersensitivity reactions to PEG due to pre-existing anti-PEG antibodies in healthy humans have raised concerns. Advancements in controlled polymerization techniques and conjugation chemistries have paved the way for the development of protein-polymer conjugates that can circumvent these adverse reactions while retaining the benefits of such modifications. Herein, we show the development of polynorbornene based bioconjugates of therapeutically relevant urate oxidase (UO) enzymes used in the treatment of gout synthesized by grafting-from ring-opening metathesis polymerization (ROMP). Notably, these conjugates exhibit comparable levels of bioactivity to PEGylated UO and demonstrate increased stability across varying temperatures and pH conditions. Immune recognition of conjugates by anti-UO antibodies reveal low protein immunogenicity following the conjugation process. Additionally, UO conjugates employing zwitterionic polynorbornene successfully avoid recognition by anti-PEG antibodies, further highlighting a potential replacement for PEG.

Protein-polymer bioconjugation, immobilization, and encapsulation: a comparative review towards applicability, functionality, activity, and stability.

Polymer-based biomaterials have received a lot of attention due to their biomedical, agricultural, and industrial potential. Soluble protein-polymer bioconjugates, immobilized proteins, and encapsulated proteins have been shown to tune enzymatic activity, improved pharmacokinetic ability, increased chemical and thermal stability, stimuli responsiveness, and introduced protein recovery. Controlled polymerization techniques, increased protein-polymer attachment techniques, improved polymer surface grafting techniques, controlled polymersome self-assembly, and sophisticated characterization methods have been utilized for the development of well-defined polymer-based biomaterials. In this review we aim to provide a brief account of the field, compare these methods for engineering biomaterials, provide future directions for the field, and highlight impacts of these forms of bioconjugation.

Fabrication of GSH‐Responsive Poly(Tertiary Amine‐Oxide)‐Based Nanomedicines for Enhanced Anticancer Drug Release

AbstractPoly(tertiary amine‐oxide)‐based polymeric nanocarriers have showed more functionalities than stealthy PEG‐based analogs due to the structure of phospholipid affinitive N‐oxides groups, which has attracted considerable attention to the synthesis of various zwitterionic copolymers with tertiary amine‐oxide grafts for enhanced anticancer drug delivery. However, poly(tertiary amine‐oxide)‐based amphiphilic copolymers with tumor intracellular microenvironment sensitivities, to the knowledge, have been rarely reported likely due to the lack of a controlled synthetic strategy. Herein, a reducible zwitterionic copolymer, poly(ε‐caprolactone)25‐SS‐poly(2‐(N‐oxide‐N,N‐diethylamino)ethyl methacrylate)30 (PCL25‐SS‐OPDEA30) is designed and synthesized successfully via combination of controlled polymerization techniques and post polymerization modification. Specifically, postoxidation of poly(tertiary amine) is confirmed to be a better synthetic strategy toward a well‐defined polymer structure relative to direct polymerization of N,N‐diethylaminoethyl methacrylate (ODEA). The effect of disulfide bridges on the self‐assembly behaviors, in vitro drug loading and drug release properties is investigated in detail. Notablely, the resulting micelles self‐assembled from PCL25‐SS‐OPDEA30 show much greater colloidal stability, higher drug loading content (DLC), and better in vitro tumor cell inhibition than the reduction‐insensitive counterparts. Overall, this study reports a robust strategy toward zwitterionic nanomedicines for on‐demand anticancer drug delivery.

End‐/side‐chain fluorescent polymer conjugates: Stimuli‐responsiveness and biological applications

AbstractSmart fluorescent polymers are an interesting class of advanced materials that find widespread applications in diverse areas ranging from materials chemistry to biology. This review highlights the last 15 years' developments of end‐chain and side‐chain fluorescent polymer conjugates by employing various controlled polymerization techniques, with a major focus on “grafting to” or “grafting from” strategies. The fluorescent polymer conjugates that discussed in this review are limited to some conventional dye molecules such as perylene‐3,4,9,10,‐bis(dicarboximide), 1,8‐naphthalimide, tetraphenylethylene, azo dye, rhodamine, coumarin, fluorescein, pyrene, and a few other selected dyes. Attempts are also made to primarily describe the changes in optical properties of these conjugates in response to various external stimuli. Additionally, this review extensively discusses the formation of nanoassemblies of these fluorescent polymer conjugates, along with their various applications, majorly focusing on their role in bioimaging, drug delivery, and DNA binding.

Diblock and Triblock Copolymers as Nanostructured Precursors to Functional Nanoporous Materials: From Design to Application.

Block copolymers have gained tremendous interest from the scientific community in the last two decades. These macromolecular architectures indeed constitute ideal nanostructured precursors for the generation of nanoporous materials meant for various high added value applications. The parallel emergence of controlled polymerization techniques has notably enabled to finely control their molecular features to confer them with unique structural and physicochemical properties, such as low dispersity values (Đ), well-defined volume fractions, and controlled functionality. The nanostructuration and ordering of diblock or triblock copolymers, which can be achieved through various experimental techniques, including channel die processing, solvent vapor or thermal annealing, nonsolvent-induced phase separation or concomitant self-assembly, and nonsolvent-induced phase separation, allows for the preparation of orientated microphase-separated copolymers whose morphology is dictated by three main factors, i.e., Flory-Huggins interaction parameter between constitutive blocks, volume fraction of the blocks, and polymerization degree. This review article provides an overview of the actual state of the art regarding the preparation of functional nanoporous materials from either diblock or triblock copolymers. It will also highlight the major applications of such peculiar materials.

Tailoring the Architecture of Molecular Bottlebrushes via Click Grafting-Onto Strategy.

Molecular bottlebrush (MBB) refer to a synthetic macromolecule, in which a mass of polymeric side chains (SCs) are covalently connected to a macromolecular backbone densely, representing an important type of unimolecular nanomaterial. The chemical composition, size, shape, and surface property of MBB can be precisely tailored by varying the backbones and SCs as well as the grafting density (Gdst ). Meanwhile, the topological structure of backbones and SCs can also significantly affect the chemical and physical properties of MBBs. For the past few years, by combining the structure features of MBB, the polymers with diverse architectures using MBB as building block are synthesized, including linear, branched, and cyclic MBB etc. These promising architectural features will bring MBBs with diverse architectures and lots of applications in advanced materials. For this reason, this work is interested in giving a briefly summary of the recent progress on tailor of well-defined MBBs with diverse architectures using grafting-onto strategy combined with controlled polymerization technique.

Kinetic Modeling of the Synthesis of Poly(4-vinylpyridine) Macro-Reversible Addition-Fragmentation Chain Transfer Agents for the Preparation of Block Copolymers

Reversible addition-fragmentation chain transfer (RAFT) polymerization is one of the most common controlled polymerization techniques to prepare well-defined, rather narrow dispersed polymers due to reduced demands in reactant preparation. Despite these advantages, RAFT polymerization was so far primarily utilized on small laboratory scales. This study presents a first step to a scaled-up RAFT polymerization by developing and experimentally validating a kinetic model on the example of the polymerization of 4-vinylpyridine (4VP), which to date is not described in the literature. With the implementation of the results from modeling, the synthesis process was extended to a medium scale (from 6 to 36 g), while the same high conversions, molar mass, and low dispersity as in the smaller scale were achieved. The process is also optimized regarding the high degree of livingness necessary for using the 4VP polymers as a macro-RAFT agent in the subsequent reaction step for the synthesis of poly(4-vinylpyridine)-b-polystyrene diblock copolymers by RAFT dispersion polymerization.

Poly(2-oxazoline)-derived star-shaped polymers as potential materials for biomedical applications: A review

Poly(2-oxazoline)s (POx) are a unique class of polymers with an enormous potential for the preparation of functional materials. Their synthesis via the cationic ring-opening polymerisation (CROP) of 2-oxazolines enables the design of tailored polymers with reactive sites at their α- or ω-end (telechelic POx), or in the side chain. Due to their biocompatibility and low-fouling properties, hydrophilic POx have shown promise as novel stealth-polymers for applications in the biomedical area. In this context, the development of defined high molar mass POx to reduce renal clearance and improve blood circulation times beyond linear polymers has drawn attention. In this contribution, different strategies for the design of star-shaped POx will be summarised. The CROP of 2-oxazolines is presented as a manifold tool to obtain cross-linked or branched star-like materials. In addition, strategies which combine CROP with other controlled polymerisation techniques will be discussed. Star-shaped POx are showcased a versatile platform to create high molar mass POx in a controlled manner and tune the properties of the resulting polymers.

Polymerization-Induced Self-Assembly for Efficient Fabrication of Biomedical Nanoplatforms.

Amphiphilic copolymers can self-assemble into nano-objects in aqueous solution. However, the self-assembly process is usually performed in a diluted solution (<1 wt%), which greatly limits scale-up production and further biomedical applications. With recent development of controlled polymerization techniques, polymerization-induced self-assembly (PISA) has emerged as an efficient approach for facile fabrication of nano-sized structures with a high concentration as high as 50 wt%. In this review, after the introduction, various polymerization method-mediated PISAs that include nitroxide-mediated polymerization-mediated PISA (NMP-PISA), reversible addition-fragmentation chain transfer polymerization-mediated PISA (RAFT-PISA), atom transfer radical polymerization-mediated PISA (ATRP-PISA), and ring-opening polymerization-mediated PISA (ROP-PISA) are discussed carefully. Afterward, recent biomedical applications of PISA are illustrated from the following aspects, i.e., bioimaging, disease treatment, biocatalysis, and antimicrobial. In the end, current achievements and future perspectives of PISA are given. It is envisioned that PISA strategy can bring great chance for future design and construction of functional nano-vehicles.

A guide to functionalisation and bioconjugation strategies to surface-initiated polymer brushes.

Since the first introduction of their concept in the 1980s and 90s, polymer brushes have been the focus of intense research efforts to identify novel physico-chemical properties and responsiveness, and optimise the properties of associated interfaces for an ever growing range of applications. To a large extent, this effort has been enabled by progress in surface initiated controlled polymerisation techniques, allowing a huge diversity of monomers and macromolecular architectures to be harnessed and achieved. However, polymer functionalisation through chemical coupling of various moieties and molecular structures has also played an important role in expanding the molecular design toolbox of the field of polymer brush science. This perspective article reviews recent progress in polymer brush functionalisation, discussing a broad range of strategies for the side chain and end chain chemical modification of these polymer coatings. The impact of the brush architecture on associated coupling is also examined. In turn, the role that such functionalisation approaches play in the patterning and structuring of brushes, as well as their conjugation with biomacromolecules for the design of biofunctional interfaces is then reviewed and discussed.

Cationic bottlebrush brush polymers via sequential SI‐ROMP and SI‐ARGET‐ATRP

AbstractHere we describe a facile approach to preparing cationic bottlebrush brush polymers via sequential surface‐initiated (SI) ring‐opening metathesis polymerization and SI activators regenerated by electron transfer atom transfer radical polymerization. These techniques afforded both bottlebrush polymer brushes and their linear polymer brush analogues with cationic triphenylphosphonium pendant groups. Utilization of two controlled polymerization techniques with orthogonal requirements for monomers and additives allowed the polymerization of the backbone and the pendant side chains to be controlled independently. Grafting polymer side chains to a polymer brush backbone resulted in a thickness increase of ca 70%, indicating that the polymers are forced into a stretched conformation with greater surface coverage than was afforded by the linear brush polymers. As a result of the stretched conformation, greater ionic conductivity in the bottlebrush brush architectures was observed. © 2022 Society of Industrial Chemistry.

Strong Anionic/Charge-Neutral Block Copolymers from Cu(0)-Mediated Reversible Deactivation Radical Polymerization.

Despite recent developments in controlled polymerization techniques, the straightforward synthesis of block copolymers that feature both strong anionic and charge-neutral segments remains a difficult endeavor. In particular, solubility issues may arise during the direct synthesis of strong amphiphiles and typical postpolymerization deprotection often requires harsh conditions. To overcome these challenges, we employed Cu(0)-mediated reversible deactivation radical polymerization (Cu(0)-RDRP) on a hydrophobic isobutoxy-protected 3-sulfopropyl acrylate. Cu(0)-RDRP enables the rapid synthesis of the polymer, reaching high conversions and low dispersities while using a single solvent system and low amounts of copper species. These macromolecules are straightforward to characterize and can subsequently be deprotected in a mild yet highly efficient fashion to expose their strongly charged nature. Furthermore, a protected sulfonate segment could be grown from a variety of charge-neutral macroinitiators to produce, after the use of the same deprotection chemistry, a library of amphiphilic, double-hydrophilic as well as thermoresponsive block copolymers (BCPs). The ability of these various BCPs to self-assemble in aqueous media was further studied by dynamic light scattering, ζ-potential measurements as well as atomic force and electron microscopy.

One‐For‐All Polyolefin Functionalization: Active Ester as Gateway to Combine Insertion Polymerization with ROP, NMP, and RAFT

This work develops the Polyolefin Active-Ester Exchange (PACE) process to afford well-defined polyolefin-polyvinyl block copolymers. α -Diimine Pd(II)-catalyzed olefin polymerizations were investigated through in-depth kinetic studies in comparison to an analog to establish the critical design that facilitates catalyst activation. Simple transformations lead to a diversity of functional groups forming polyolefin macroinitiators or macro-mediators for various subsequent controlled polymerization techniques. Preparation of block copolymers with different architectures, molecular weights, and compositions was demonstrated with ring-opening polymerization (ROP), nitroxide-mediated polymerization (NMP), and photoiniferter reversible addition-fragmentation chain transfer (PI-RAFT). The significant difference in the properties of polyolefin-polyacrylamide block copolymers was harnessed to carry out polymerization-induced self-assembly (PISA) and study the nanostructure behaviors.

One-For-All Polyolefin Functionalization: Active Ester as Gateway to Combine Insertion Polymerization with ROP, NMP, and RAFT.

This work develops the Polyolefin Active-Ester Exchange (PACE) process to afford well-defined polyolefin-polyvinyl block copolymers. α-Diimine PdII -catalyzed olefin polymerizations were investigated through in-depth kinetic studies in comparison to an analog to establish the critical design that facilitates catalyst activation. Simple transformations lead to a diversity of functional groups forming polyolefin macroinitiators or macro-mediators for various subsequent controlled polymerization techniques. Preparation of block copolymers with different architectures, molecular weights, and compositions was demonstrated with ring-opening polymerization (ROP), nitroxide-mediated polymerization (NMP), and photoiniferter reversible addition-fragmentation chain transfer (PI-RAFT). The significant difference in the properties of polyolefin-polyacrylamide block copolymers was harnessed to carry out polymerization-induced self-assembly (PISA) and study the nanostructure behaviors.

Thiol-Lactam Initiated Radical Polymerization (TLIRP): Scope and Application for the Surface Functionalization of Nanoparticles

: Controlled polymerization techniques make the possible fabrication of polymers with desired molecular weights, narrow dispersity, and tailor-making of advanced hybrid materials. Thiol- Lactam Initiated Radical Polymerization (TLIRP) was introduced in 2002 and developed during the last two decades. The thiol/lactam combination enables one to generate radicals that can initiate the polymerization of vinyl-based monomers. The study of the mechanism and kinetics of TLIRP revealed the characteristics of living polymerization for TLIRP. Moreover, TLIRP has been used successfully for the synthesis of homopolymers, block copolymers, and statistical copolymers with polydispersity below 2.0. Especially, TLIRP provides a very straightforward method for grafting polymer brushes on the surface of nanoparticles. We review herein the systems developed for TLIRP and their applications for macromolecular engineering, emphasizing the surface functionalization of nanoparticles via the grafting-from approach.

Sidechain Metallopolymers with Precisely Controlled Structures: Synthesis and Application in Catalysis.

Inspired by the cooperative multi-metallic activation in metalloenzyme catalysis, artificial enzymes as multi-metallic catalysts have been developed for improved kinetics and higher selectivity. Previous models about multi-metallic catalysts, such as cross-linked polymer-supported catalysts, failed to precisely control the number and location of their active sites, leading to low activity and selectivity. In recent years, metallopolymers with metals in the sidechain, also named as sidechain metallopolymers (SMPs), have attracted much attention because of their combination of the catalytic, magnetic, and electronic properties of metals with desirable mechanical and processing properties of polymeric backbones. Living and controlled polymerization techniques provide access to SMPs with precisely controlled structures, for example, controlled degree of polymerization (DP) and molecular weight dispersity (Đ), which may have excellent performance as multi-metallic catalysts in a variety of catalytic reactions. This review will cover the recent advances about SMPs, especially on their synthesis and application in catalysis. These tailor-made SMPs with metallic catalytic centers can precisely control the number and location of their active sites, exhibiting high catalytic efficiency.

Triblock Copolymer Micelles with Tunable Surface Charge as Drug Nanocarriers: Synthesis and Physico-Chemical Characterization.

Polymeric micelles have gained increasing interest as efficient drug delivery systems for cancer treatment and diagnosis. The aim of the present study was to construct and to evaluate novel polymeric nanosized drug carriers with tunable surface charges. Initially, amphiphilic triblock copolymers with predetermined molar mass characteristics were synthesized by applying controlled polymerization techniques. The copolymers self-assembled in aqueous media into core–shell spherical micelles, comprising a biodegradable hydrophobic poly(D,L-lactide) core, positively charged middle layer of poly((2-dimethylamino)ethyl methacrylate), and an outer shell of neutral hydrophilic poly(oligo(ethylene glycol) methyl ether methacrylate), with various densities of the short polyether side chains. The block copolymer micelles with average diameters of about 70 nm and surface charges varying from strongly positive to neutral were characterized and loaded with the model, natural, hydrophobic drug curcumin. Characteristics such as drug loading efficiency, in-vitro drug release profiles, and stability under physiological conditions were evaluated and discussed in terms of nanocarriers’ composition. As a result, the most promising candidates for potential application in nanomedicine were identified.

Click Chemistry Approaches for the Synthesis and Functionalization of Macromolecules

Click chemistry methods are powerful tools in the hands of synthetic chemists. Cu(I)-catalyzed azide-alkyne [3+2] dipolar cycloaddition reaction (CuAAC) is accepted as “the cream of the crop” of click chemistry techniques due to its orthogonality and near-perfect yields in very mild conditions. Besides CuAAC, Diels–Alder (DA), thiol–ene, atom transfer nitroxide radical coupling (ATNRC), and aldehyde–aminooxy reactions are other effective ligation methods in terms of chemoselectivity and reaction yields at moderate conditions, thus they are also accepted as click chemistry reactions. Click chemistry and controlled polymerization techniques have been utilized extensively in the synthesis of well-defined and elegant macromolecular structures.

Fe-Doped Copolymer-Templated Nitrogen-Rich Carbon as a PGM-Free Fuel Cell Catalyst

Platinum group metal-free (PGM-free) catalysts present a promising opportunity to make hydrogen fuel cells more affordable; however, issues with stability and electrochemical activity continue to hinder their application. Recent studies point to the availability of nitrogen and a controlled mesoporous structure as avenues of improvement. To address this need, copolymer-templated nitrogen-enriched carbon (CTNC) was used as the precursor to prepare PGM-free catalysts for the oxygen reduction reaction (ORR). By employing its rich nitrogen content and interconnected mesoporous structure, a significant amount of Fe–N–C-active sites were formed by co-annealing CTNC with FeSO4. The formed N/Fe co-doped nanocarbon (CTNC-Fe) catalyst exhibits good electrochemical activity with a half-wave potential of 0.781 V vs normal hydrogen electrode (NHE), a total surface area of 400 m2/g, and a power density of 180 mW/cm2. The block copolymer (BCP) was made by atom transfer radical polymerization (ATRP), which allows control and tunability of the block copolymer. This work opens new opportunities to improve the electrochemical activity and stability of PGM-free catalysts by controlled polymerization techniques that precisely tune the pore structure and maximize nitrogen content to improve the formation of active sites in the catalysts.