Polarization Control Research Articles

Polarization self-modulation in a coaxially end-pumped orthogonally polarized laser

A scheme of orthogonally polarized laser (OPL) with polarization self-modulation (PSM) in the coaxial end-pumping configuration is proposed in this work. The gain medium consisted of two Nd:YVO4 crystals with orthogonal optical axes, and a quarter-wave plate served as a polarization-switching device. By rotating the electric vector during each cavity round trip, frequency degeneration and correlated operation of two polarization components were achieved. The polarization eigenstates in two orthogonal directions were analyzed using the Jones matrix and eigenequation. The spectral distribution was also briefly discussed based on thermal effects. The results showed that two eigenmodes located at 45° and 135° to the crystal axis, respectively, with a frequency difference equaled to half the free spectral range of the resonator. In the experiments, it was found for the first time that the modulation of eigenstates can be realized by adjusting pump parameters (including pump power, beam size, focusing position, and pump wavelength) and cavity anisotropy, which enables the manipulation of degree of polarization (DOP) and monitoring the resonator properties. Overall, tuning the laser polarization eigenstate offers a flexible method to switch the operational states of the OPL, including the longitudinal mode frequency difference, DOP, polarization angle, etc. It is believed this scheme provides a valuable reference to realize compact, high-beam-quality, and robust OPLs for applications such as dual-frequency light source development, precision measurement and polarization control.

Polarity control and crystalline quality improvement of AlN thin films grown on Si(111) substrates by molecular beam epitaxy

We attain N-polar and Al-polar AlN thin films on Si(111) substrates by plasma-assisted molecular beam epitaxy. The polarity of AlN epilayers has been validated by wet chemical etching using tetramethylammonium hydroxide and by the direct cross-sectional observation of atomic stacking under high-angle annular dark-field scanning transmission electron microscopy. For the 290 nm-thick as-grown N-polar AlN epilayer, x-ray diffraction (XRD) (002) and (102) ω rocking curve peak full width half maximums (FWHMs) are 475 and 1177 arcsec, and the surface mean square roughness (RMS) is 0.30 nm. We flipped the polarity using the metal-flux-modulation-epitaxy (MME) strategy. The MME strategy promotes anti-phase boundaries (APBs) on the {22¯01} crystalline planes instead of commonly observed lateral planar APBs in AlN epilayers. Merging of the tilted APBs at ∼50 nm leads to a complete Al-polar surface. For the 180 nm-thick Al-polar AlN epilayer, XRD (002) and (102) peak FWHMs are 1505 and 2380 arcsec, and the surface RMS is 1.41 nm. Strain analysis by XRD and Raman spectroscopy indicates a uniform tensile strain of 0.160% across the N-polar AlN epilayer surface and a strain distribution of 0.113%–1.16% through the epilayer. In contrast, the Al-polar AlN epilayer exhibits a much broader tensile strain distribution of 0.482%–2.406% along the growth direction, potentially due to the interaction of polarity inversion and strain relaxation.

Switchable Dual-Wavelength Fiber Laser with Narrow-Linewidth Output Based on Parity-Time Symmetry System and the Cascaded FBG

In this paper, a dual-wavelength narrow-linewidth fiber laser based on parity-time (PT) symmetry theory is proposed and experimentally demonstrated. The PT-symmetric filter system consists of two optical couplers (OCs), four polarization controllers (PCs), a polarization beam splitter (PBS), and cascaded fiber Bragg gratings (FBGs), enabling stable switchable dual-wavelength output and single longitudinal-mode (SLM) operation. The realization of single-frequency oscillation requires precise tuning of the PCs to match gain, loss, and coupling coefficients to ensure that the PT-broken phase occurs. During single-wavelength operation at 1548.71 nm (λ1) over a 60-min period, power and wavelength fluctuations were observed to be 0.94 dB and 0.01 nm, respectively, while for the other wavelength at 1550.91 nm (λ2), fluctuations were measured at 0.76 dB and 0.01 nm. The linewidths of each wavelength were 1.01 kHz and 0.89 kHz, with a relative intensity noise (RIN) lower than −117 dB/Hz. Under dual-wavelength operation, the maximum wavelength fluctuations for λ1 and λ2 were 0.03 nm and 0.01 nm, respectively, with maximum power fluctuations of 3.23 dB and 2.38 dB. The SLM laser source is suitable for applications in long-distance fiber-optic sensing and coherent LiDAR detection.

Vanadium-dioxide-assisted multifunctional switchable terahertz metamaterial devices

A multifunctional, switchable terahertz (THz) metamaterial (MM) device with wideband absorption and polarization conversion capabilities has been developed, based on the insulator-metal phase transition of vanadium dioxide (VO2). In its metallic state, the device operates as a wideband absorber within the range of 2.56–6.74 THz, achieving a bandwidth of 4.18 THz and an absorption rate of ≥90%. The wideband absorption is insensitive to both oblique incident angles and polarization. When VO2 is in its insulating state, the device switches to a polarization converter, facilitating linear-to-cross polarization (LTX) conversion between 1.04 and 4 THz, and linear-to-circular polarization (LTC) conversion between 1 and 1.04 THz, with a conversion efficiency exceeding 90%. Additionally, the effects of incident angle and polarization angle on the device’s performance were analyzed. This THz device offers advantages of wide angle, wide bandwidth, and high efficiency, making it a valuable reference for research into new multifunctional THz devices. It has great potential applications in short-range wireless THz communication, ultrafast optical switches, high-temperature resistant switches, transient spectroscopy, and optical polarization control devices. In specific application scenarios, particularly in fields requiring efficient detection, transmission, and analysis—such as security and non-destructive testing, secure communication systems, imaging and sensing, multidimensional spectral analysis, pollutant detection, smart stealth coatings, dynamic optical control devices, and integrated optical systems—these devices offer multifunctional capabilities. They enhance system performance and flexibility, meeting diverse application needs.

Ultrathin metasurface for super multi-view 3D display with linear and circular polarization control

Multiview 3D display technologies are advantageous due to their smooth motion parallax, visual discomfort alleviation, and wide depth of focus. However, the potential applications of this technology are constrained by its bulky size and limited light modulation capability. Metasurfaces offer diverse wavefront control by manipulating the phase, amplitude, and polarization of light. They provide design freedom and high image quality for multiview 3D display technologies. Here, we propose an ultrathin metasurface-based super multiview 3D display that can effectively modulate the flexibility of linearly polarized (LP) and circularly polarized (CP) electromagnetic waves. Numerical results demonstrate that it can produce 24 views together for LP and CP waves and high-quality reconstructed 3D images are obtained. The suggested metasurface for super multiview 3D display is promising to underpin the advancement of meta-optics-based operations in 3D display, imaging and integrated optics.

Directional Phase and Polarization Manipulation Using Janus Metasurfaces.

Janus metasurfaces, exemplifying two-faced 2D metamaterials, have shown unprecedented capabilities in asymmetrically manipulating the wavefront of electromagnetic waves in both forward and backward propagating directions, enabling novel applications in asymmetric information processing, security, and signal multiplexing. However, current Janus metasurfaces only allow for directional phase manipulation, hindering their broader application potential. Here, the study proposes a versatile Janus metasurface platform that can directionally control the phase and polarization of terahertz waves by integrating functionalities of half-wave plates, quarter-wave plates, and metallic gratings within a cascaded metasurface structure. As a proof-of-principle, the study experimentally demonstrates Janus metasurfaces capable of independent and simultaneous control over phase and polarization, showcasing propagation direction-encoded focusing and polarization conversion. Moreover, the directionally focused points are utilized with distinct polarization states for advanced applications in direction- and polarization-sensitive detection and imaging. This unique strategy for simultaneous phase and polarization control with direction-dependent versatility opens new avenues for designing ultra-compact devices with significant implications in imaging, encryption, and data storage.

Relation of V/III ratio of AlN interlayer with the polarity of nitride

Abstract N-polar GaN film was obtained by using a high-temperature AlN buffer layer. It was found that the polarity could be inverted by a thin low-temperature AlN interlayer with the same V/III ratio as that of the high-temperature AlN layer. Continuing to increase the V/III ratio of the low-temperature AlN interlayer, the Ga-polarity of GaN film was inverted to N-polarity again but the crystal quality and surface roughness of GaN film greatly deteriorated. Finally, we analyzed the chemical environment of the AlN layer by x-ray photoelectron spectroscopy (XPS), which provides a new direction for the control of GaN polarity.

Controlled light distribution with coupled microresonator chains via Kerr symmetry breaking

Within optical microresonators, the Kerr interaction of photons can lead to symmetry breaking of optical modes. In a ring resonator, this leads to the interesting effect that light preferably circulates in one direction or in one polarization state. Applications of this effect range from chip-integrated optical diodes to nonlinear polarization controllers and optical gyroscopes. In this work, we study Kerr-nonlinearity-induced symmetry breaking of light states in coupled resonator optical waveguides (CROWs). We discover, to our knowledge, a new type of controllable symmetry breaking that leads to emerging patterns of dark and bright resonators within the chains. Beyond stationary symmetry broken states, we observe Kerr-effect-induced homogeneous periodic oscillations, switching, and chaotic fluctuations of circulating powers in the resonators. Our findings are of interest for controlled multiplexing of light in photonic integrated circuits, neuromorphic computing, topological photonics, and soliton frequency combs in coupled resonators.

Hybrid Anapole Induced Chirality in Metasurfaces.

The interaction between light and matter, particularly chirality, plays a pivotal role in modern science and technology. Typically, metasurfaces achieve chiro-optical effects by coupling electric and magnetic dipoles in specific orientations. In this work, the design and optimization of an asymmetric H-shaped metasurface is explored to induce hybrid anapole (HA) for optical activity. When the symmetry of the metasurface structure is disrupted, the design can simultaneously excite first-order and pseudo high-order HA under illumination with a specific circular polarization, both occurring within the same spectral regime. This results in high reflection for one circular polarization and a significant reduction in reflection for the orthogonal polarization, thereby exhibiting exceptional chiro-optical activity. Moreover, the HA-based chiral metasurface demonstrates strong polarization control capabilities, as verified by Stokes parameter analysis, revealing high birefringence and a pronounced dependence on the incident polarization angle. These results provide valuable insights for the design and optimization of HA metasurfaces for advanced optical applications and polarization control, paving the way for new developments in chiral nanophotonics.

Barrier Polarity Reversal Based on Interfacial Modification of Au Nanoparticles for Nonvolatile Multilevel Memory and Optoelectronic Synapses.

Optoelectronic synaptic devices, integrating light sensing and information processing capabilities, have emerged as advantageous tools for the implementation of visual neuromorphic computing. However, the transient light-triggered response characteristic typically results in unstable memory retention times and restricted current response ranges, posing significant challenges to the development and practical application of neural network systems. In response to these limitations, this study developed a nonvolatile optoelectronic memory based on the indium tin oxide (ITO)/Au nanoparticles (NPs)/amorphous Ga2O3 (a-Ga2O3)/Pt structure. Unlike conventional optoelectronic memories, this device features a modification with Au NPs that markedly enhances the Schottky barrier height at the interface. Au NPs function as a charge-trapping layer for sensitive and large-scale modulation of the barrier by the light field, thereby enabling the nonvolatile reversal of the device's barrier polarity. This innovative approach enables controllable multilevel data storage with an ultra large on/off ratio (∼104) and excellent retention capability exceeding 12,000 s. Additionally, the device emulates essential synaptic functions and demonstrates potential application values in visual weak signal perception and image memory. This study introduces a mechanism for Schottky barrier polarity control and presents a promising strategy for the development of future high-performance integrated devices and optoelectronic synaptic elements.

Decimeter-depth and polarization addressable color 3D meta-holography

Fueled by the rapid advancement of nanofabrication, metasurface has provided unprecedented opportunities for 3D holography. Large depth 3D meta-holography not only greatly increases information storage capacity, but also enables distinguishing of the relative spatial relationship of 3D objects, which has important applications in fields like optical information storage and medical diagnosis. Although the methods based on Fresnel diffraction theory can reconstruct the real depth information of 3D objects, the maximum depth is only 2 mm. Here, we develop a 3D meta-holography based on angular spectrum diffraction theory to break through the depth limit. By developing the angular spectrum diffraction theory into meta-holography, the metasurface structure with independent polarization control is used to create a polarization multiplexing 3D meta-hologram. The fabricated amorphous silicon metasurface increases the depth range by 47.5 times and realizes 0.95 dm depth reconstruction for polarization independent and different color 3D meta-hologram in visible. Such polarization controlled large-depth color meta-holography is expected to open avenue for data storage, display, information security and virtual reality.

Multiple Multicolored 3D Polarization Knots Arranged along Light Propagation.

Polarization and color play essential roles in understanding optical phenomena and practical applications. Customized three-dimensional (3D) light fields, characterized by specific polarization and color distributions, have garnered growing interest owing to their unique optical attributes and expanded capacity for information encoding. To align with the ongoing trend of compactness and integration, it is desirable to develop lightweight optical elements that can simultaneously control polarization and color in 3D space. Although engineering longitudinally variable 3D optical structures with predesigned color and polarization information can add more degrees of freedom and additional capacity for information encoding, it has not been reported. We propose a metasurface approach to generating multiple 3D polarization knots along the light propagation direction. Each knot features two colors and an engineered 3D polarization profile. Different multicolored 3D polarization knots are obtained by controlling the observation region along the light propagation. Our approach simultaneously combines polarization, color, and longitudinal control in 3D environment, offering extra degrees of freedom for engineering complex vector beams. The unique properties of the developed metadevices, together with the design flexibility and compactness of metasurface, pave the way for polarization systems with small volumes applicable to some areas such as complex structured beams and encryption.

Dual Orthogonally Polarized Lasing Assisted by Imaginary Fermi Arcs in Organic Microcavities.

The polarization control of micro- and nanolasers is an important topic in nanophotonics. Up to now, the simultaneous generation of two distinguishable orthogonally polarized lasing modes from a single organic microlaser remains a critical challenge. Here, we demonstrate simultaneously orthogonally polarized dual lasing from a microcavity filled with an organic single crystal exhibiting selective strong coupling. We show that the non-Hermiticity due to polarization-dependent losses leads to the formation of real and imaginary Fermi arcs with exceptional points. Simultaneous orthogonally polarized lasing becomes possible thanks to the eigenstate mixing by the photonic spin-orbit coupling at the imaginary Fermi arcs. Our work provides a novel way to develop linearly polarized lasers and paves the way for the future fundamental research in topological photonics, non-Hermitian optics, and other fields.

X-ray circular dichroism measured by cross-polarization x-ray transient grating

Abstract Measuring natural circular dichroism in the x-ray regime to extract stereochemical information from chiral molecules in solution remains a challenge. This is primarily due to technical limitations of the existing synchrotron sources, which hinder access to measurements of local chirality by exploiting core hole electronic transitions. In response to this challenge, we propose an alternative approach: utilizing XFEL-based cross-polarization x-ray transient grating (XTG). This method provides an indirect means to measure x-ray circular dichroism (XCD). Notably, our findings reveal that the signal emerges only once the excited cores have undergone dephasing through relaxation. XTG is now routinely measured in the XUV regime and has recently been made available for hard x-rays. Free electron lasers now offer polarization controls, and XTG can be extended to various polarization states for the two pump beams, making XCD measured by XTG feasible with the current state-of-the-art technology.

Interplay of Circularly Polarized Light with Molecular and Structural Chirality: Chiral Lanthanide Complexes and Cellulose Nanocrystals

AbstractThe interaction of circularly polarized (CP) light with chiral matter at different scales opens several possibilities of light manipulation in photonic and electronic devices. Here it is shown that in a multilayer architecture, it is possible to take advantage of the polarization‐selective reflection of the nematic arrangement of cellulose nanocrystals and the strong intrinsic CP luminescence (CPL) of the various bands of chiral Eu complexes. In this way, both the intrinsic CPL and total emission of the complex are modified depending on the enantiomer applied and on the detection geometry. This concept may apply for polarization control in electronic and photonic devices and polarized optical cavities.

Long-Range Ballistic Propagation of 80% Excitonic Fraction Polaritons in a Perovskite Metasurface at Room Temperature.

Exciton-polaritons, hybrid light-matter excitations arising from the strong coupling between excitons in semiconductors and photons in photonic nanostructures, are crucial for exploring the physics of quantum fluids of light and developing all-optical devices. Achieving room temperature propagation of polaritons with a large excitonic fraction is challenging but vital, e.g., for nonlinear light transport. We report on room temperature propagation of exciton-polaritons in a metasurface made from a subwavelength lattice of perovskite pillars. The large Rabi splitting, much greater than the optical phonon energy, decouples the lower polariton band from the phonon bath of the perovskite. These cooled polaritons, in combination with the high group velocity achieved through the metasurface design, enable long-range propagation, exceeding hundreds of micrometers even with an 80% excitonic component. Furthermore, the design of the metasurface introduces an original mechanism for unidirectional propagation through polarization control, suggesting a new avenue for the development of advanced polaritonic devices.

Sb2S3/AlGaAs-based reconfigurable metasurface for dynamic polarization and directionality control of quantum emitter emission.

In this article, we report, to the best of our knowledge, for the first time, phase change material (PCM)-based reconfigurable metasurfaces for tailoring different degrees of freedom (DoF) of the quantum emitter (QE) emission, namely polarization and directionality, two key controlling factors in applications such as quantum computing, communication, and chiral optics. We have used a hybrid plasmon-QE coupled bullseye grating system utilizing the unexplored concept of composite nano-antennas in quantum photonics as the basic building block of the structures. Carefully engineered azimuthal width profile of the Sb2S3/AlGaAs composite ridge and selectively controlled transition of PCM (Sb2S3) states provide dynamic control over the amplitude and phase of the scattered radiation. Based on this methodology, we have designed five different metasurfaces for on-demand switching of target DoFs of QE emission, ensuring high collection efficiency due to the near-field coupling scheme. The first two metasurfaces switch the majority of the outgoing radiation from radially polarized to circularly polarized, whereas the next two switch the direction of circularly polarized outgoing radiation by a maximum of 9.23° while maintaining the spin state (or polarization chirality) in the simulation environment. The third metasurface category is capable of on-demand generation and separation of opposite spin states of outgoing radiation by 11.48° utilizing the selectively controlled phase transition of Sb2S3. Such reconfigurable multi-dimensional manipulation of QE radiation has not been investigated previously. This work proves the vast potential of active metasurfaces to modify the DoFs of QE emission, paving the way for high-dimensional quantum sources for high-speed quantum communication, higher dimensional quantum processing, and switchable chiral optics.

First demonstration of 2T0C-FeDRAM: a-ITZO FET and double gate a-ITZO/a-IGZO FeFET with a record-long multibit retention time of >4-bit and >2000 s.

Conventional DRAM, consisting of one transistor and one capacitor (1T1C), requires periodic data refresh processes due to its limited retention time and data-destructive read operation. Here, we propose and demonstrate a novel 3D-DRAM memory scheme available with a single transistor and a single ferroelectric field-effect transistor (FeFET) DRAM (2T0C-FeDRAM), which offers extended retention time and non-destructive read operation. This architecture uses a back-end-of-line (BEOL)-compatible amorphous oxide semiconductor (AOS) that is suitable for increasing DRAM cell density. Notably, the device structures of a double gate a-ITZO/a-IGZO FeFET, used for data storage and reading, are engineered to achieve an enlarged memory window (MW) of 1.5 V and a prolonged retention time of 104 s. This is accomplished by a double gate and an a-ITZO/a-IGZO heterostructure channel to enable efficient polarization control in hafnium-zirconium oxide (HZO) layers. We present successful program/erase operations of the double gate a-ITZO/a-IGZO FeFET through incremental step pulse programming (ISPP), demonstrating multi-level states with remarkable retention characteristics. Most importantly, we perform 2T0C-FeDRAM operations by electrically connecting the double gate a-ITZO/a-IGZO FeFET and the a-ITZO FET. Leveraging the impressive performance of the double gate a-ITZO/a-IGZO FeFET technology, we have effectively showcased an exceptionally record-long retention time exceeding 2000 s and 4-bit multi-level states, positioning it as a robust contender among emerging memory solutions in the era of artificial intelligence.

Deterministic and multiuser quantum teleportation network of continuous-variable polarization states

Quantum teleportation is widely applied as a key ingredient in quantum information science, and quantum network provides unique abilities for upscaling its applications. Polarization state of light is a vital degree of freedom with the advantages of remote transfer and direct light-atom interaction. To construct a multiuser quantum network, deterministic quantum teleportation of polarization state in more users' network remains challenging. Compared with photonic quantum state, the deterministic quantum teleportation network of polarization state is realized with a single set of continuous-variable entangled states. The key techniques include only one set of quadrature entangled network, single quadrature controller, and active polarization controller. Arbitrary polarization state is deterministically and controllably teleported in such a system involving four or three users. This system is deterministic and scalable with user number, which enables the potential application in deterministic metropolitan quantum network. Published by the American Physical Society 2024

Double Tips for In-Plane Polarized Near-Field Microscopy and Spectroscopy.

Near-field optical microscopy and spectroscopy provide high-resolution imaging below the diffraction limit, crucial in physics, chemistry, and biology for studying molecules, nanoparticles, and viruses. These techniques use a sharp metallic tip of an atomic force microscope (AFM) to enhance incoming and scattered light by excited near-fields at the tip apex, leading to high sensitivity and a spatial resolution of a few nanometers. However, this restricts the near-field orientation to out-of-plane polarization, limiting optical polarization choices. We introduce double tips that offer in-plane polarization for enhanced imaging and spectroscopy. These double tips provide superior enhancement over single tips, although with a slightly lower spatial resolution (∼30 nm). They enable advanced studies of nanotubes, graphene defects, and transition metal dichalcogenides, benefiting from polarization control. The double tips allow varied polarization in tip-enhanced Raman scattering and selective excitation of transverse-electric and -magnetic polaritons, expanding the range of nanoscale samples that can be studied.