Quantification Of Content Research Articles

Flavonoid content of selected foods – A comparison of four international composition tables

The content of flavonoids, widely found in plant-based foods, might differ depending on which food composition table (FCT) is being used. In this study, we investigated the variation and comparability in the flavonoid content of selected foods across four international food composition tables. Flavonoid estimates were derived for all foods available in each table, and comparisons were carried out for foods common between tables. Bias percentage, 95 % limits of agreement, and intra-class correlation coefficients (ICCs; 95 % confidence intervals [95 %CI]) were estimated. Phenol-Explorer and Indian FCT showed moderate level of agreement for total flavonoid (ICC 0.50 and 0.57 respectively) when compared to the USDA table. eBASIS for total flavonoids and anthocyanidins (ICC 0.67 and 0.85, respectively), and Indian FCT for flavanols and flavanones (ICC 0.71 and ICC 0.85, respectively) showed moderate-to-good level of agreement, and low level of agreement for other subclasses when compared to Phenol Explorer. Several flavonoid subclasses showed low to moderate levels of agreement between FCTs, whilst others (including total flavonoid intake) had lower levels of agreement. Methodological approaches in the measurement of flavonoid content of foods across tables, and continued efforts to improve harmonization of these databases would contribute to improve quantification of flavonoid content.

Evaluation of emergency skin decontamination protocols in response to an acid attack (vitreolage)

The incidence of “acid attacks” (vitreolage) is a global concern, with those affected often receiving lifelong medical care due to physical and psychological damage. The purpose of this study was to evaluate the effectiveness of several emergency skin decontamination approaches against concentrated (>99 %) sulphuric acid and to identify the effective window of opportunity for decontamination. The effects of four decontamination methods (dry, wet, combined dry & wet and cotton cloth) were assessed using an in vitro diffusion cell system containing dermatomed porcine skin. Sulphuric acid (H2SO4) was applied to the skin with decontamination protocols performed at 10 s, 30 s, 8 min, and 30 min post exposure. Skin damage was quantified by tritiated water (3H2O) penetration, receptor fluid pH and photometric stereo imaging (PSI), with quantification of residual sulphur (by SEM-EDS) to determine overall decontamination efficiency. Skin translucency (quantified by PSI) demonstrated a time-dependent loss of dermal tissue integrity from 10 s. Quantification of dermal sulphur content confirmed the rapid (exponential) decrease in decontamination efficiency with time. The pH of the water effluent indicated complete neutralisation of acid from the skin surface after 90 s of irrigation. Wet decontamination (either alone or immediately following dry decontamination) was the most effective intervention evaluated, although no decontamination technique was statistically effective after 30 s exposure to the acid. These data demonstrate the time-critical consequences of dermal exposure to concentrated sulphuric acid: we find no practical window of opportunity for acid decontamination, as physical damage is virtually instantaneous.

Evaluation of candidate International Standards for meningococcal capsular polysaccharide groups W and Y

Two candidate International Standards for meningococcal capsular group W and Y (MenW and MenY, respectively) polysaccharides were assessed for their suitability as quantitative standards in various physicochemical assays. The study was designed to evaluate the intended purpose of these standards, namely, to standardize the quantification of the respective polysaccharide content in meningococcal polysaccharide and conjugate vaccines and their intermediate components. Twelve laboratories from eleven different countries participated in the collaborative study of candidate preparations for International Standards for MenW and MenY polysaccharide (coded 16/152 and 16/206, respectively). Unitage was assigned using the Resorcinol assay. Our proposals, on the basis of data from the Resorcinol assay were: 1) candidate standard for MenW polysaccharide (16/152) to be assigned a content of 1.015 ± 0.071 mg MenW polysaccharide per ampoule (expanded uncertainty with coverage factor k = 2.13, corresponding to a 95 % level of confidence) and 2) candidate standard for MenY polysaccharide (16/206) be assigned a content of 0.958 ± 0.076 mg MenY polysaccharide per ampoule (expanded uncertainty with coverage factor k = 2.26, corresponding to a 95 % level of confidence). The amount of polysaccharide per ampoule remained consistent under all stability conditions over a 36-month period.

Nigella sativa Oil-loaded Ethanolic Vesicular Gel for Imiquimod-induced Plaque Psoriasis: Physicochemical Characterization, Rheological Studies, and In vivo Efficacy.

The therapeutic effect of NS oil in mild to moderate psoriasis is limited owing to low play load of thymoquinone ( < 15 %w/w), irritation, dripping, low viscosity and thus, less contact time on the lesions. This study aimed at developing and characterizing the ethanolic vesicular hydrogel system of Nigella sativa (NS) oil (NS EV hydrogel) for the enhancement of anti-psoriatic activity. The objective of this study was to develop NS EV hydrogel and evaluate its anti-psoriatic activity. The identification and quantification of TQ content in different NS seed extracts and marketed oil were measured by an HPTLC method using n-hexane and ethyl acetate as solvent systems. Preparation of ethanolic vesicles (EVs) was performed by solvent injection method, while its antipsoriatic activity was evaluated employing an Imiquad (IMQ)-induced plaque psoriasis animal model. A compact HPTLC band was obtained for TQ at an Rf value of 0.651. The calibration plot was linear in the range of 1-10 μg/spot, and the correlation coefficient of 0.990 was indicative of good linear dependence of peak area on concentration. From the different NS sources, the high TQ content was obtained in the marketed cold press oil, i.e., 1.45±0.08mg/ml. Out of various NS oilloaded EVs, the F6 formulation revealed the smallest particle size (278.1nm), with log-normal size distribution (0.459) and adequate entrapment efficiency. A non-uniform shape was observed in the transmission electron microscopy. The viscosity of F6 formulation hydrogel was 32.34 (Pa·s), which exhibited plastic behavior. In vivo, efficacy studies demonstrated decreased inflammation of the epidermis and dermis and a marked decrease in the levels of IL-17 by NS EV hydrogel compared to plain NS oil and standard drugs (Betamethasone and Dr. JRK Psorolin Oil). It may be concluded from the findings that NS-loaded EV gel was as good as betamethasone cream but more efficacious than the other treatments.

Quantification of volumetric thigh and paravertebral muscle fat content: comparison of quantitative Dixon (Q-Dixon) magnetic resonance imaging (MRI) with high-speed T2-corrected multiecho MR spectroscopy.

Muscle fat infiltration (MFI) is increasingly recognized as a critical factor influencing muscle function and metabolic health. Accurate quantification of MFI is essential for diagnosing and monitoring various muscular and metabolic disorders. Quantitative Dixon (Q-Dixon) magnetic resonance imaging (MRI) and high-speed T2-corrected multi-echo (HISTO) magnetic resonance spectroscopy (MRS) are both advanced imaging techniques that offer potential for detailed assessment of MFI. However, the validity and reliability of these methods in measuring volumetric changes in muscle composition, particularly in both thigh and paravertebral muscles, have not been thoroughly compared. This study aims to validate volumetric measurements using Q-Dixon MRI against HISTO MRS in thigh and paravertebral muscles, taking into account the heterogeneity of MFI. A retrospective study was conducted with 54 subjects [mean age, 60 years; 38 male (M)/16 female (F)] for thigh muscle and 56 subjects (mean age, 50 years; 22 M/34 F) for paravertebral muscle assessment using a 3-Tesla MRI. The proton density fat fraction (PDFF) was measured with Q-Dixon MRI and HISTO MRS within the upper-middle part of quadriceps femoris and paravertebral muscles at L4/5 level in volumes-of-interest (VOIs). The corresponding volumetric Q-Dixon freehand VOI PDFF was measured. Scatterplots, Bland-Altman plots, Spearman correlation coefficients, and Wilcoxon signed rank test with Bonferroni correction were employed. The Kruskal-Wallis H tests followed by Bonferroni-corrected post hoc tests were analyzed to compare parameter differences with visual MFI grades. Q-Dixon cubic VOI PDFF correlated positively with HISTO MRS PDFF in thigh (r=0.96, P<0.001) and paravertebral groups (r=0.98, P<0.001), with insignificant differences (P=0.29, 0.82, respectively). Both PDFF values from cubic VOIs in Q-Dixon and HISTO MRS differed from the freehand Q-Dixon PDFF (all P<0.001). Only for <5% HISTO MRS PDFF, there was a difference between HISTO MRS PDFF and Q-Dixon cubic VOI PDFF (P=0.002). Volumetric Q-Dixon cubic VOI PDFF exhibited good correlation and consistency with HISTO MRS PDFF for quantitative fat assessment in thigh and paravertebral muscles except for muscles with fat fraction <5%, and the Q-Dixon freehand VOI PDFF offers a more comprehensive assessment of the actual MFI compared to cubic VOI.

Determination of Carbohydrate Composition in Lentils Using Near-Infrared Spectroscopy.

Carbohydrates are the main components of lentils, accounting for more than 60% of their composition. Their content is influenced by genetic factors, with different contents depending on the variety. These compounds have not only been linked to interesting health benefits, but they also have a significant influence on the techno-functional properties of lentil-derived products. In this study, the use of near-infrared spectroscopy (NIRS) to predict the concentration of total carbohydrate, fibre, starch, total sugars, fructose, sucrose and raffinose was investigated. For this purpose, six different cultivars of macrosperm (n = 37) and microsperm (n = 43) lentils have been analysed, the samples were recorded whole and ground and the suitability of both recording methods were compared. Different spectral and mathematical pre-treatments were evaluated before developing the calibration models using the Modified Partial Least Squares regression method, with a cross-validation and an external validation. The predictive models developed show excellent coefficients of determination (RSQ > 0.9) for the total sugars and fructose, sucrose, and raffinose. The recording of ground samples allowed for obtaining better models for the calibration of starch content (R > 0.8), total sugars and sucrose (R > 0.93), and raffinose (R > 0.91). The results obtained confirm that there is sufficient information in the NIRS spectral region for the development of predictive models for the quantification of the carbohydrate content in lentils.

Cancer cell migration depends on adjacent ASC and adipose spheroids in a 3D bioprinted breast cancer model

Breast cancer develops in close proximity to mammary adipose tissue and interactions with the local adipose environment have been shown to drive tumor progression. The specific role, however, of this complex tumor microenvironment in cancer cell migration still needs to be elucidated. Therefore, in this study, a 3D bioprinted breast cancer model was developed that allows for a comprehensive analysis of individual tumor cell migration parameters in dependence of adjacent adipose stroma. In this co-culture model, a breast cancer compartment with MDA-MB-231 breast cancer cells embedded in collagen is surrounded by an adipose tissue compartment consisting of adipose-derived stromal cell (ASC) or adipose spheroids in a printable bioink based on thiolated hyaluronic acid. Printing parameters were optimized for adipose spheroids to ensure viability and integrity of the fragile lipid-laden cells. Preservation of the adipogenic phenotype after printing was demonstrated by quantification of lipid content, expression of adipogenic marker genes, the presence of a coherent adipo-specific extracellular matrix, and cytokine secretion. The migration of tumor cells as a function of paracrine signaling of the surrounding adipose compartment was then analyzed using live-cell imaging. The presence of ASC or adipose spheroids substantially increased key migration parameters of MDA-MB-231 cells, namely motile fraction, persistence, invasion distance, and speed. These findings shed new light on the role of adipose tissue in cancer cell migration. They highlight the potential of our 3D printed breast cancer-stroma model to elucidate mechanisms of stroma-induced cancer cell migration and to serve as a screening platform for novel anti-cancer drugs targeting cancer cell dissemination.

Quantification of the sp3 content in Diamond-Like carbon Films: Effects of Ne plasma addition in Deep Oscillation Magnetron sputtering

Diamond-like carbon (DLC) films are a class of amorphous carbon materials with unique properties, including high hardness and wear resistance, making them attractive for aerospace and automotive applications. Recently, High Power Impulse Magnetron Sputtering (HiPIMS) has emerged as a new route for magnetron-sputtered hard DLC films. The authors have previously demonstrated that adding Ne to the plasma significantly improves the properties of DLC films deposited by Deep Oscillation Magnetron Sputtering (DOMS), a HiPIMS variant. In this study, the sp3 content evolution with DLC film thickness was measured by Electron Energy Loss Spectroscopy (EELS) and Near Edge X-ray Absorption Spectroscopy (NEXAFS). The sp3 content in the top section of the film deposited in Ar + Ne plasma is close to 40 % and remains constant across the film thickness. Conversely, in films deposited in pure Ar plasma, the sp3 content decreases from approximately 30 % to 18 % towards the surface. Ne addition increases the sp3 content by enhancing the carbon ion flux and counteracting the atomic shadowing effect. These findings provide novel insights into the role of Ne in reducing the atomic shadowing effect and improving the overall quality of DLC films, paving the way for their optimized industrial use.

A comparative study of Mongolian medicine prescriptions in the Chinese Pharmacopoeia and Tibetan medicinal compounds in the Ministerial Standards

Objective: To analyze the similarity between Mongolian medicine prescriptions included in the 2020 edition of the Pharmacopoeia of the People’s Republic of China (hereinafter referred to as the Chinese Pharmacopoeia) and Tibetan medicinal compounds according to the Drug Standards of the Ministry of Public Health of the People’s Republic of China: Tibetan Medicine (Volume I) (hereinafter referred to as the Ministerial Standards). Methods: A comparative analysis was conducted between Mongolian medicine prescriptions contained in the Chinese Pharmacopoeia and the corresponding Tibetan medicinal compounds included in the Ministerial Standards using Jaccard similarity coefficients and Hellinger distance algorithms across three dimensions: composition, shared drug dosage ratio, and efficacy. Different weights were applied to calculate the comprehensive similarity between the formulas. Simultaneously, we collated and verified the original source literature, and determined the era of composition for each formula. Results: The overall similarity between the Mongolian medicine prescriptions from the Chinese Pharmacopoeia and the Tibetan medicinal compounds from the Ministerial Standards was over 50%. Notably, the composite similarity for the pairings Sanwei Jili San and Sanwei Jili Tangsan, as well as Wuwei Qingzhuo San and Shiliu Anzhi Jinghua San, exceeded 90%. Additionally, six sets of formulas achieved a similarity of over 75%. Literature research has revealed that all 13 sets of formulas first appeared in Tibetan medical literature and were long-standing practices in Tibetan medicine clinics, significantly predating their initial documentation in Mongolian medical literature. Conclusion: The 13 sets of Mongolian medicine prescriptions originated from Tibetan medicinal compounds. Throughout their evolution, the sets adhered to the principles of similar origins and/or properties and effects, leading to the emergence of both commonly used and alternative items. Nevertheless, the efficacy of the formulas has remained highly consistent. The phenomenon of ingredient substitution in the formulas could be attributed to various factors, such as resource availability and cognitive differences among inheritance schools. This study has important implications for further comparative research on content quantification and pharmacological activity. Such research could uncover new medicinal varieties, fostering the sustainable development of Tibetan and Mongolian medicine.

The Glasgow Microenvironment Score: an exemplar of contemporary biomarker evolution in colorectal cancer.

Colorectal cancer remains a leading cause of mortality worldwide. Significant variation in response to treatment and survival is evident among patients with similar stage disease. Molecular profiling has highlighted the heterogeneity of colorectal cancer but has had limited impact in daily clinical practice. Biomarkers with robust prognostic and therapeutic relevance are urgently required. Ideally, biomarkers would be derived from H&E sections used for routine pathological staging, have reliable sensitivity and specificity, and require minimal additional training. The biomarker targets would capture key pathological features with proven additive prognostic and clinical utility, such as the local inflammatory response and tumour microenvironment. The Glasgow Microenvironment Score (GMS), first described in 2014, combines assessment of peritumoural inflammation at the invasive margin with quantification of tumour stromal content. Using H&E sections, the Klintrup-Mäkinen (KM) grade is determined by qualitative morphological assessment of the peritumoural lymphocytic infiltrate at the invasive margin and tumour stroma percentage (TSP) calculated in a semi-quantitative manner as a percentage of stroma within the visible field. The resulting three prognostic categories have direct clinical relevance: GMS 0 denotes a tumour with a dense inflammatory infiltrate/high KM grade at the invasive margin and improved survival; GMS 1 represents weak inflammatory response and low TSP associated with intermediate survival; and GMS 2 tumours are typified by a weak inflammatory response, high TSP, and inferior survival. The prognostic capacity of the GMS has been widely validated while its potential to guide chemotherapy has been demonstrated in a large phase 3 trial cohort. Here, we detail its journey from conception through validation to clinical translation and outline the future for this promising and practical biomarker.

Success factors and obstacles in the implementation of competence-oriented teaching in surgery

For successful competence-oriented teaching at the medical faculties it is important to identify the factors that influence its implementation in order to benefit from the strengths and balance out weaknesses. The present study examined the success factors and obstacles of the implementation of competence-oriented teaching in the surgical discipline from the point of view of students and lecturers. After implementation of competence-oriented teaching based on the teaching goals of the NKLM, in clinical examination courses (bedside teaching and block internship, BP) at two hospitals, aqualitative content analysis and quantification of the answers were performed using focus group interviews and questionnaires with students (S)and lecturers(D). During the summer semester 2022 a total of 31students and 14lecturers were interviewed in focus groups and 143 questionnaires (123S, 20D) were analyzed. For the students the presence of concrete competences/teaching goals, guidelines for the lesson, transparent goals and ability to demand teaching goals as well as structured lessons and mentoring were the main success factors. Lecturers on the other hand reported the presence of concrete goals, assistance for the lesson preparation and the activity of the students as success factors. The results of the questionnaires showed that the majority (88%S, 75%D) were informed about the teaching goals and considered them to be followed (84%S, 95%D). Obstacles were the factors "time", "mentoring" and "information". Factors that were between negative and positive (indifferent factors) were "uncertainty about competence-orientation" and "uncertainty how to examine the teaching success". Transparent structure and teaching goals as well as amentoring system are the success factors for the implementation of competence-oriented lessons and should be used as strengths. Indifferent factors represent weaknesses and need to be addressed by training and instruction. Restricted time and personnel resources are the immanent problems that hamper the implementation and require fulminant structural changes.

A morphological analysis of calcium hydroxylapatite and poly-l-lactic acid biostimulator particles.

Injectable fillers, pivotal in aesthetic medicine, have evolved significantly with recent trends favoring biostimulators like calcium hydroxylapatite (CaHA-CMC; Radiesse, Merz Aesthetics, Raleigh, NC) and poly-l-lactic acid (PLLA; Sculptra Aesthetics, Galderma, Dallas, TX). This study aims to compare the particle morphology of these two injectables and examine its potential clinical implications. Utilizing advanced light and scanning electron microscopy techniques, the physical characteristics of CaHA-CMC and PLLA particles were analyzed, including shape, size, circularity, roundness, aspect ratio, and quantity of phagocytosable particles. The findings reveal several morphological contrasts: CaHA-CMC particles exhibited a smooth, homogenous, spherical morphology with diameters predominantly ranging between 20 and 45µm, while PLLA particles varied considerably in shape and size, appearing as micro flakes ranging from 2 to 150µm in major axis length. The circularity and roundness of CaHA-CMC particles were significantly higher compared to PLLA, indicating a more uniform shape. Aspect ratio analysis further underscored these differences, with CaHA-CMC particles showing a closer resemblance to circles, unlike the more oblong PLLA particles. Quantification of the phagocytosable content of both injectables revealed a higher percentage of phagocytosable particles in PLLA. These morphological distinctions may influence the tissue response to each treatment. CaHA-CMC's uniform, spherical particles may result in reduced inflammatory cell recruitment, whereas PLLA's heterogeneous particle morphology may evoke a more pronounced inflammatory response.

Identification and characterization of zinc importers in Corynebacterium diphtheriae.

Corynebacterium diphtheriae is the causative agent of diphtheria, a severe respiratory disease in humans. C. diphtheriae colonizes the human upper respiratory tract, where it acquires zinc, an essential metal required for survival in the host. While the mechanisms for zinc transport by C. diphtheriae are not well characterized, four putative zinc ABC-type transporter loci were recently identified in strain 1737: iutABCD/E (iut), znuACB (znu), nikABCD1 (nik1), and nikABCD2 (nik2). A mutant deleted for all four loci (Δ4) exhibited similar growth to that of the wild-type strain in a zinc-limited medium, suggesting there are additional zinc transporters. Two additional gene loci predicted to be associated with metal import, mntABCD (mnt) and sidAB (sid), were deleted in the Δ4 mutant to construct a new mutant designated Δ6. The C. diphtheriae Δ6 mutant exhibited significantly reduced growth under zinc limitation relative to the wild type, suggesting a deficiency in zinc acquisition. Strains retaining the iut, znu, mnt, or sid loci grew to near-wild-type levels in the absence of the other five loci, indicating that each of these transporters may be involved in zinc uptake. Plasmid complementation with cloned iut, znu, mnt, or nik1 loci also enhanced the growth of the Δ6 mutant. Quantification of intracellular zinc content by inductively coupled plasma mass spectrometry was consistent with reduced zinc uptake by Δ6 relative to the wild type and further supports a zinc uptake function for the transporters encoded by iut, znu, and mnt. This study demonstrates that C. diphtheriae zinc transport is complex and involves multiple zinc uptake systems.IMPORTANCEZinc is a critical nutrient for all forms of life, including human bacterial pathogens. Thus, the tools that bacteria use to acquire zinc from host sources are crucial for pathogenesis. While potential candidates for zinc importers have been identified in Corynebacterium diphtheriae from gene expression studies, to date, no study has clearly demonstrated this function for any of the putative transporters. We show that C. diphtheriae encodes at least six loci associated with zinc import, underscoring the extent of redundancy for zinc acquisition. Furthermore, we provide evidence that a previously studied manganese-regulated importer can also function in zinc import. This study builds upon our knowledge of bacterial zinc transport mechanisms and identifies potential targets for future diphtheria vaccine candidates.

Rapid and non-destructive quantification of meat content in the legs of live red king crab (Camtschaticus paralithodes) by near-infrared spectroscopy

Red king crab (RKC) is one of the most widely distributed and well-known of all king crabs. The edible meat of the RKC is in the legs and claws and is considered a delicacy. Occasionally, the content of meat is low, and this is regarded as the single most negative quality attribute. In this study, we elucidated how rapid and non-destructive near-infrared spectroscopy (NIRS) on live RKCs can be used to predict the meat content in the cooked legs. A NIRS prototype (wavelength range 760–1080 nm) was used to obtain spectra from the interior tissue of the crab legs. 99 live crabs (380 legs) were measured over a 10-month period. Calibration models were developed with a prediction error for meat content of 6.4 %-points, which is accurate enough to classify the crabs into low (<80 %) and high meat content. The amount of cooked meat is proportional to the amount protein in the muscle. A limitation with the method is that it may overestimate the meat content if the legs have lost free water due to e.g. injuries in the exoskeleton. The technology described can facilitate a more sustainable RKC fishery and improve the subsequent trade and processing.

A fast method for predicting adenosine content in porcini mushrooms using Fourier transform near-infrared spectroscopy combined with regression model

Adenosine is an endogenous neuroprotective agent. It is of great importance to research the porcini mushrooms' adenosine for developing products. However, problems, such as the old for new and traditional methods for detecting adenosine content are complicated and time-consuming, seriously restrict industrial development. The present study aimed to achieve a rapid quantification of adenosine content in porcini mushrooms on the market using Fourier transform near-infrared (FT-NIR) spectroscopy combined with partial least squares regression (PLSR) model. Herein, the nucleoside content and spectral characteristics of the large-scale dataset (n = 242) were analyzed, which was used as the calibration set for constructing the PLSR model. The PLSR model had an R2C of 0.907 and a residual predictive deviation (RPD) of 2.726. For random samples with different origins, the R2P was 0.768 and the RPD was 1.326, for the storage period, the R2P was 0.952 and the RPD was 3.069, and for various collection years, the R2P was 0.927 and the RPD was 2.548. It was demonstrated that the established method offers a rapid and reliable prediction strategy for adenosine content of random porcini mushrooms samples, which has the potential to be applied in the market.

A look inside the gut as a clue to nutritional status.

Malabsorption and malnutrition are common gastrointestinal manifestations clinicians face, requiring diagnostic workup for effective diagnosis and management of the underlying cause. This review discusses recent advances in diagnostic approaches to malabsorption and maldigestion of macronutrients - lipids, proteins, and carbohydrates. We highlight underrecognized causes, available testing modalities, and ongoing diagnostic unmet needs. Innovations in the diagnostic landscape are enhancing our understanding of malabsorption syndromes. Stool collection and handling is uncomfortable and commonly avoided. The objective quantification of stool lipids, bile acids, and gut enzymes is therefore underused in the diagnosis and management of common disorders such as exocrine pancreatic insufficiency, bile acid diarrhea, protein-losing enteropathy, and more. We review the recent advancements in spot quantification of stool fat and bile acid content, endoscopic imaging techniques such as endocytoscopy, confocal laser endomicroscopy, and optical coherence tomography and the future place in clinical practice. Malabsorption and maldigestion represent significant challenges in clinical nutrition and gastroenterology. Through the integration of advanced diagnostic techniques, clinicians will be better equipped to tailor therapy and monitor treatment response, ultimately improving patient health outcomes. This review underscores the critical role of innovative diagnostic tools in accurately detecting and effectively managing gastrointestinal disorders linked to nutritional status.

Quantification of testicular fat content: the value of evaluating testicular function after cryptorchidism surgery.

To investigate the correlation between testicular fat content (TFC) and sex hormone levels in patients with cryptorchidism and its value in assessing postsurgical testicular function. Pelvic MRI with the mDIXON Quant sequence was performed on 23 cryptorchidism patients and 15 normal controls. The TFC before and after surgery was measured and compared. The correlations between cryptorchid TFC and testosterone (TSTO), follicle-stimulating hormone (FSH), and estradiol (E2) levels were analyzed, as was the specificity of TFC and each hormone for assessing testicular function after surgery. The preoperative cryptorchid TFC (3.06% ± 0.74) was higher than that of the normal controls (1.36% ± 0.49). TSTO was negatively correlated with the cryptorchid TFC (r = -0.698), while FSH and E2 were positively associated with the cryptorchid TFC (r = 0.658, 0.676). Cryptorchid TFC after surgery (2.01% ± 0.55) was lower than the preoperative TFC, but hormone levels were not significantly different. The TFC after surgery (0.864) had a larger AUC value than did TSTO (0.639), FSH (0.597), and E2 (0.586). Noninvasive quantification of cryptorchid TFC using the mDIXON Quant sequence is more specific than hormone levels for assessing postsurgical changes in testicular function. The cryptorchid testicular fat content is significantly higher than the normal testicular fat content. Cryptorchid testicular fat content is negatively correlated with presurgical serum TSTO levels and positively correlated with presurgical FSH and E2 levels. Pre- and postoperative changes in cryptorchid testicular fat content change are more sensitive than changes in TSTO, FSH, or E2 levels. Noninvasive cryptorchid testicular fat content quantified by the mDIXON Quant sequence is more specific than serum TSTO, FSH, and E2 levels for assessing changes in testicular function after cryptorchidism surgery.

An ultra-sensitive CRISPR-Cas12a and aptamer-based biosensor utilizing Entropy-driven catalytic DNA networks for precise detection of DNA Methyltransferase 1

DNA Methyltransferase 1 (DNMT1) serves as a crucial biomarker associated with various diseases and is essential for evaluating DNA methylation levels, diagnosing diseases, and evaluating prognosis. As a result, a convenient, quantitative, and sensitive assay for detecting DNMT1 is in high demand. However, current techniques for DNMT1 detection struggle to balance accuracy, low cost, and high sensitivity, limiting their clinical usefulness. To address this challenge, we have developed a DNMT1 detection method (CAED), which combines aptamer-specific recognition with a highly programmable Entropy-driven catalysis DNA network and is further integrated with the CRISPR-Cas12a system. This innovative approach achieves a detection limit as low as 90.9 fmol/L. To demonstrate the clinical applicability and significance of our CAED method, we successfully measured DNMT1 levels in 10 plasma samples 10 cervical tissue samples. These results underscore the potential of our method as an accurate, affordable, and ultra-sensitive tool for evaluating DNMT1 levels. This innovative method offers a potent means for assessing DNMT1 levels and significantly advances disease diagnosis and health risk prediction. Plus, it establishes an innovative design framework for CRISPR-Cas12a-based biosensors, tailored explicitly for enzyme content quantification.

One-Step Precise Characterization of Drug Delivery Systems by PULCON Magnetic Resonance Spectroscopy.

Polymers are extensively used for the realization of drug delivery systems across multiple scales, from nanomedicines to microparticles and macroscopic implantable devices, for their favorable biodegradation profiles and tunable physicochemical features. The accurate quantification of the polymer content is key to finely controlling drug loading and release and ensuring reproducibility, yet it continues to be a major challenge in the design and development of delivery systems. In this study, we introduce a novel protocol based on the PULCON technique to quantify, with a routine NMR spectroscopy analysis, the precise concentration of polymers in various delivery systems. Specifically, the PULCON protocol is applied to characterize the physicochemical and pharmaceutical properties of nanoparticles, microparticles, and implantable devices realized by combining three extensively used polymers, namely, poly(lactic-co-glycolic acid) (PLGA), poly(vinyl alcohol) (PVA), and poly(ethylene glycol) (PEG). Without using internal calibration procedures, in a single step, the PULCON protocol precisely quantifies the concentration of each polymer and the drug content. This approach can be readily implemented on standard NMR spectrometers, enabling accurate characterization of drug delivery systems and facilitating their effective development.

Investigating the Nutritional and Functional Properties of Protaetia brevitarsis Larvae and Isolated Soy Protein Mixtures as Alternative Protein Sources.

The growing demand for sustainable and alternative protein sources has spurred interest in insect-based and plant-based proteins. Protaetia brevitarsis (PB) larvae and isolated soy protein (ISP) are notable in this regard, offering potential health benefits and nutritional enhancements. We assessed the feasibility of PB larvae and ISP mixtures as alternative food ingredients. Methods included the optimized purification and freeze-drying of PB larvae, extraction and refinement of legume proteins, physicochemical and antioxidant capacity evaluations, DPPH radical scavenging activity measurement, total phenolic and flavonoids content quantification, general component analysis, amino acid profiling using HPLC, fatty acid profiling through gas chromatography, and mineral content analysis using inductively coupled plasma spectrometry. The study found that certain PB:ISP ratios, particularly a 7:3 ratio, significantly improved the blend's antioxidant capacity, as evidenced by DPPH scavenging activity. This ratio also impacted the nutritional profile by altering the mixture's general components, with a notable increase in moisture, crude protein, and fiber and a decrease in crude fat and ash. Amino acid analysis revealed a balanced presence of essential and non-essential amino acids. The fatty acid profile was rich in unsaturated fatty acids, especially in certain ratios. Mineral analysis showed a complex interplay between PB larvae and ISP, with some minerals decreasing and others increasing in the blend. PB larvae and ISP mixtures have significant potential as alternative protein sources, offering a diversified nutritional profile and enhanced antioxidant properties. The 7:3 ratio of PB larvae to ISP has been shown to be particularly effective, suggesting that this ratio may offer an optimal balance for enhancing the overall nutritional quality of the mixture. This study sets the stage for future research to further explore and optimize the potential of these mixtures for human consumption while considering the challenges of consumer acceptance and long-term safety.