Organic Matter Content Research Articles

Physical Properties of Soils in Selected Subdivisions in Tacloban City and Palo, Leyte

The study was conducted to analyzed and to determine the physical properties of soil such as texture, bulk density, water holding capacity, soil moisture content, pH, and organic matter content in selected subdivisions in Tacloban City and Palo, Leyte. Analysis of pH, texture, water holding capacity, and organic matter was at the Soil Research Testing and Plant Analysis Laboratory (SRTPAL) Department of Agronomy and Soil Science (DASS) VSU Baybay, Leyte. While the bulk density, soil moisture content was computed using the standard formula. To analyzed the result Analysis of Variance (ANOVA) using the SPSS Program to determine whether soils from subdivisions categorized as waterlogged and mountainous, developed and developing subdivisions derived from their filling and parent materials were significant different. The results showed that soils from various categories from subdivisions had no significant effect on bulk density, water holding capacity, & soil moisture content. However, some properties such as soil pH were significant in the waterlogged and mountainous area. It is recommended that a further study be conducted to include all appropriate soil parameters and procedures such as liming for acid soils, cause of erosion, flooding, water drainage capacity, depth to water table and other significant soil quality parameters. Also recommend for in-depth study by the developers and engineers to ensure that the soil quality be suitable for housing and for the safety of the homeowners.

Effect and Mechanism of Water-soluble Chitosan Promoting Phytoremediation of Cd and/or Pb-contaminated Soils by Sedum aizoon L.

A pot experiment was conducted to investigate the growth response, concentration, and transportation characteristics of Cd and Pb in Sedum aizoon L. in four typical Cd/Pb-contaminated soils from northern and southern China with the addition of different levels of water-soluble chitosan （WSC）. The effect of WSC on physicochemical properties, Cd and Pb forms, and functional groups in contaminated soils was determined to clarify the internal mechanism of WSC promoting Cd and Pb accumulation by S. aizoon. The results showed that WSC improved the physicochemical properties of rhizosphere soil by increasing alkaline nitrogen and organic matter contents and significantly reducing pH values. In addition, WSC significantly increased the acid-extractable Cd and Pb in contaminated soils by 16.3%-34.5% and 88.9%-272.4%, respectively. Fourier transform infrared spectra analysis showed that amino （-NH2） and hydroxyl （-OH） groups in soils were significantly increased by adding WSC. Therefore, the coordination of Cd/Pb with -NH2 and -OH may play important roles in forming complexes and mobilizing Cd/Pb in soils. Moreover, the improvement in the rhizosphere environment of contaminated soils by WSC contributed to promoting Cd and Pb accumulation by S. aizoon. WSC significantly increased the total Cd and Pb accumulation by 14.5%-72.1% and 55.0%-128.5%, respectively, without obvious growth inhibition. Therefore, it is feasible to apply WSC to promote Cd/Pb accumulation using S. aizoon, while the matching of WSC addition amount, soil pollution condition, and plant materials should be further considered in practical application.

Treatment of sugarcane vinasse in AnMBR and UASB: process performance and microbial community comparison.

Vinasse is a by-product of sugarcane processing which is often used in fertigation; however, the direct use of vinasse harms the environment and reduces soil productivity due to its physicochemical properties. Anaerobic digestion (AD) offers an alternative to mitigate part of the negative effects. Anaerobic high-rate reactors, which mainly rely on sludge granulation, are mostly used in AD of vinasse wastewater. However, the composition of vinasse such as high concentration of solids and organic matter, high salinity, low pH, and high concentrations of sulfate, affect granule formation, leading to sludge washout. Anaerobic membrane bioreactors (AnMBR) present an alternative for vinasse treatment, eliminating the need for sludge granulation and producing a nutrient-rich effluent with minimal residual organics and no suspended solids. Research on sugarcane vinasse treatment using AnMBRs is limited. Most studies have employed submerged internal membrane modules, highlighting the need for further research with different reactor configurations to enhance process performance. In this study, an AnMBR equipped with an external inside-out crossflow ultrafiltration membrane was compared to an upflow anaerobic sludge blanket (UASB) reactor for the treatment of sugarcane vinasse. At a volumetric organic loading rate of up to 6g COD. L-1.d-1, the UASB reactor reached 75% ± 7% of COD removal efficiency whereas the AnMBR generated a solids-free effluent and reached 88% ± 2% of COD removal efficiency. Microorganisms such as Clostridia, Bacteroidia, Mesotaga, Syner-01, Dehalococcoidia, Bacteroidia-DMER64, and Methanolinea were found as the most abundant. The results highlight the AnMBR potential as an effective alternative for treating sugarcane vinasse while overcoming the challenges posed by unsatisfactory sludge granulation.

Positive impacts of compost and biochar from orange peel waste on Phaseolus vulgaris physio-biochemistry and productivity and soil properties under salinity stress

ABSTRACT Bioconversion of organic orange peel wastes into compost (OPC) or biochar (OPB) can help overcome the effects of soil salinity and maintain agricultural productivity. Effect of 1.0% OPC or 1.0% OPB as soil amendments on soil properties and performance of Phaseolus vulgaris plants under two salinity levels [5.60 dS m−1 (S-1) and 9.60 dS m−1 (S-2)] versus control [1.60 dS m−1 (S-0)] was investigated. Compared to the control, S-1 and S-2 increased soil sodium ion (Na+) content, while reducing soil organic matter (OM), macro- and micro-nutrients, cation exchange capacity (CEC), and enzyme (urease, acid phosphatase, and alkaline phosphatase) activities, reflecting decreased plant growth and yield. Under S-1 or S-2, OPC application exceeded OPB application, but both considerably enhanced soil OM content, nutrients, CEC, and enzyme activities. These positive results reflected decreased leaf electrolyte leakage and increased leaf-relative water content, pigments, nutrients, K+/Na+ ratio, antioxidant activity, plant growth, and yield. The beneficial impacts of 1.0% OPC were more pronounced under S-2 than S-1 or S-0. In conclusion, adding 1.0% OPC to saline soil (ECe of about 5–10 dS m−1) could mitigate the influences of soil salinity to improve Phaseolus vulgaris growth, physio-biochemistry, and yield.

Driving factors of molybdenum (Mo) bioconcentration in maize in the Longitudinal Range-Gorge Region of Southwestern China.

Molybdenum (Mo) plays an important role in maintaining plant growth and human health. Assessment studies on the driving factors of Mo migration in soil-crop systems are crucial for ensuring optimal agricultural and human health. The Mo bioconcentration factor (BCF-Mo) is a useful tool for evaluating Mo bioavailability in soil-crop systems. However, the influence pathways and degrees of different environmental factors on BCF-Mo remain poorly understood. In this context, 109 rhizosphere and maize grain samples were collected from the Longitudinal Range-Gorge Region (LRGR) in Linshui County, Sichuan Province, China, and analyzed for the contents of Mo and other soil physiochemical parameters to explore the spatial patterns of BCF-Mo and its driving factors. Areas with the highest BCF-Mo values were mainly observed in the southern and northern parts of the Huaying and Tongluo mountains. The influence degrees of the selected environmental factors in this study followed the order of normalized difference vegetation index (NDVI) < elevation (EL) < mean annual humidity (MAH) < slope (SL) < mean annual temperature (MAT). The MAH and NDVI directly influenced the BCF-Mo values. The EL and MAT mainly indirectly affected the BCF-Mo values by influencing the rhizosphere organic matter (OM) contents, while the SL mainly affected the BCF-Mo values by influencing the rhizosphere pH. Therefore, OM and pH of the rhizosphere were the main influencing factors of BCF-Mo in the study area. In summary, the selected environmental factors mainly exhibited indirect influences on BCF-Mo by directly affecting the physicochemical properties of the rhizosphere.

Sustaining Soil Biological Activity: The Role of Extended Reduced and No-Tillage Techniques

Soil management techniques can have varying effects on various soil properties. This study investigated the impact of various tillage techniques on soil properties for 14 years. The experiment was conducted at the Çukurova University Research Station, located in a region with a dominant Mediterranean climate. The research aimed to assess the changes in soil organic matter (SOM) content, soil respiration (SR), dehydrogenase enzyme activity (DHA), and soil temperature (ST) under seven different long-term tillage practices. The results revealed significant increases (p ≤ 0.05) in SOM (17-115%), SR (19-37%), and DHA (63-142%), under conservation tillage compared to conventional tillage practices. Additionally, conventional tillage with stubble burned consistently had the lowest values across all measured properties. Seasons variations also significantly (p≤0.05) affected the observed values. These findings suggest that conventional tillage practices have a negative effect on the analyzed biological activities, with stubble burning further exacerbating this impact. Further research exploring the long-term effects of different tillage practices under varying crop rotations and soil conditions can contribute to the sustainable development of agricultural production in the region.

Pre-emergence herbicides used in urban and agricultural settings: dissipation and ecological implications

Herbicides are widely recognized as the most cost-effective solution for weed control, but their extensive use in both urban and agricultural settings raise serious concerns about nontarget effects. We assessed the possible hazards associated with pre-emergence herbicides such as dimethenamid–P, metazachlor, and pyroxasulfone, which are frequently applied in both urban and agricultural soils. The dissipation rate constant values (k day−1: 0.010–0.024) were positively linked to total organic carbon (TOC), silt, clay, soil pH, and Al and Fe oxides, but negatively correlated with sand content. In contrast, half-life values (DT50: 29–69 days) of the herbicides showed negative correlations with TOC, clay, silt, soil pH, and Fe and Al oxides, while sand content showed a positive impact. The selected herbicides showed minimal impact on soil dehydrogenase activity (DHA). Mostly, soils with higher organic matter (OM) content exhibited increased DHA levels, highlighting the role of OM in influencing this soil enzyme across different soils. Assessment of environmental indicators like groundwater ubiquity score (GUS:1.69–6.30) and leachability index (LIX: 0.23–0.97) suggested that the herbicides might reach groundwater, posing potential risks to nontarget biota and food safety. Human non-cancer risk evaluation, in terms of hazard quotient (HQ < 1) and hazard index (HI < 1), suggests minimal or no risks from exposure to soil containing herbicide residues at 50% of the initial concentrations. Our data thus help the stakeholders and regulatory agencies while applying these pre-emergence herbicides in soils and safeguarding human and environmental health.

National investigation of bisphenols in the surface soil in China

The long-term production and extensive use have resulted in the widespread presence of bisphenols (BPs) in the environment. In order to clarify the pollution characteristics and potential sources of BPs, the national scale surface soil samples were collected in China in 2019. The results demonstrated that 32 target BPs existed widely in soil with the highest concentration for bisphenol A (BPA), and at least 2 BPs were detected in each sample. The total concentration of Σ32BPs (from 0.387 to 713 ng/g) exhibited a stepwise decrease from southeastern coast to inland regions, and due to the presence of more pollution sources concentrations of Σ32BPs in urban areas were slightly higher than rural areas. The different industrial structures (such as plastics, epoxy resins, and thermal paper) may be the important factors for the different pollution levels between southeastern coast and other regions. In addition, the high organic matter content in soil and low temperature may be the reasons for high concentrations of Σ32BPs in Northeast China. The results of source identification using the Positive Matrix Factorization model indicated that BPs in soil were originated from three sources: old sources represented by BPA, relatively new sources characterized by bisphenol S, and sources from specific industries using bisphenol F. The estimated daily intake indicated that BPA exposure through soil accounted for only a small proportion of the total exposure compared to other exposure routes, and the risk by BPA in soil can be negligible to human health. In summary, the study provided basic pollution information of BPs in Chinese surface soil for future related studies.

Subsurface drainage and nitrogen management affects soil properties in upstate Missouri U.S.

Enhanced efficiency nitrogen (N) fertilizer management may reduce environmental N losses and increase grain yields. The effect of N fertilizer management practices on soil properties is uncertain. In this 5-year study, we evaluated different N fertilizer management [non-treated control (NTC), fall applied anhydrous ammonia (AA) 190 kg N ha−1 with nitrapyrin (fall AA + NI), preplant AA at 190 kg N ha−1 (spring AA), top-dressed urea (TD urea) as 42 kg N ha−1 SuperU and 126 kg N ha−1 ESN as a 25:75 % granular blend] practices in free drained (FD) and non-drained (ND) soils for their impact on soil properties. In FD soils, N fertilization significantly (P < 0.05) increased soil pH, CEC, cations, and Bray I P compared to the NTC. Improved soil aeration and increased plant growth with TD urea and spring AA fertilizer treatments in FD soils increased soil organic matter (OM) 10–13 % and total organic carbon (TOC) 27–35 % compared to the NTC. Increased clay content and reduced silt content were observed in FD soils with N fertilizer treatments compared to NTC. However, fertilizer applications in ND soils had no effect on soil properties. Increased crop production with FD and 4R N fertilizer applications can improve soil properties with increased soil OM and TOC content. This suggests that a synergetic effect of N fertilization and soil drainage can improve soil health by increasing soil cation exchange capacity (CEC), OM, and TOC content.

Conservation Agriculture and Crop Residue Management

India being a populous country the intensification of the cropping system is mandatory. However, this intensification of the cropping system results in the degradation of soil and other natural resources. Considering this situation, conservation agriculture is the most suitable alternative to achieving sustainable yield and productivity. Conservation agriculture is based on three major principles those are minimum disturbance of soil, crop rotation, and maintenance of crop residue. Crop residue management plays a major role in conservation agriculture as it helps in improving soil productivity, soil organic matter content, soil structure, soil water conservation, air quality, and reduction in soil erosion. India produces 273 Mt of crop residues annually which contain a total of 7.16 Mt of nutrients (N-1.28, P2O5-1.97, K2O-3.91). In modern agriculture, green manure crops like Sesbania and sunhemp increase the quantity and quality of the crop residues in the crop field. Among various residue management practices mulching has been practiced prominently in dry lands as it increases the resource use efficiency. The residue decomposition is affected by various factors like quality of crop residue, edaphic, management, and climatic factors. In modern scientific research crop residues are being used especially for site-specific nutrient management. It is observed in most studies that zero tillage or reduced tillage with crop residue gives comparatively higher net returns, water use efficiency, and resource use efficiency than conventional agriculture. In Indian context. The management of rice residue particularly in the Indo-Gangetic Plains of India is challenging, where the rice-wheat cropping system is intensively followed and the farmers are more anxious about timely seeding of wheat in combine harvested paddy fields (Sidhu et al., 2007; Singh et al., 2020).

Application of Hybrid Conventional Filter and PVDF-TiO&lt;sub&gt;2&lt;/sub&gt;/SBE Hollow Fibre Membrane for Peat Water Treatment

South Kalimantan-Indonesia is known to have extensive peatlands reaching 15% of a total peatland in Kalimantan. Due to that peat land water is mostly found and claim as abundant water sources. However, based on quality, peat land water has poor characteristic with high natural organic matter content. Therefore, peat water treatment is necessary to treat using effective method such as hybrid conventional filter and membrane using hollow fibre PVDF-TiO2/SBE. This study aims to investigate the variation of media filter thickness and filtration pressure of hollow fibre (HF) PVDF-TiO2/SBE membrane peat water treatment by filtration pre-treatment and HF membrane ultrafiltration. HF PVDF-TiO2/SBE membrane was prepared by wet spinning method using spinneret set up. Hybrid process was divided into two steps: 1) conventional filter as pre-treatment and 2) HF ultrafiltration membrane under cross flow system. The filter media was used in this work is silica sand and activated carbon with varied thickness 30:10 and 10:30 cm. The HF membrane structure was analysed via scanning electron microscopy (SEM) to investigate the membrane morphology. The results show the fabricated HF membrane has a finger like-sponge sandwich structure morphology. In addition, 30:10 cm (silica sand: activated carbon) thickness exhibits TDS and turbidity removal of 92.18 and 61.37%, respectively as conventional filter pre-treatment. In other hand, HF membrane successfully removed TDS and turbidity of peat water up to 98.68% and 92.41% at 2 bar of filtration pressure. The highest permeate flux of HF membrane conducted of 13.055 Kg.m-2.h-1 at 3 bar. Conclusion of this work is the peat water treatment using activated carbon: silica filtration pre-treatment and HF membrane ultrafiltration can provide clean water with maximum turbidity and TDS removal.

Thermophilic aerobic digestion using aquaculture sludge from rainbow trout aquaculture facilities: effect of salinity.

The objectives of this study were to evaluate the potential of using thermophilic aerobic digestion (TAD) to hydrolyze aquaculture sludge, and to investigate the hydrolysis efficiency and changes in microbial community structure during TAD at 0, 15, and 30 practical salinity units (psu). As digestion progressed, soluble organic matter concentrations in all reactors increased to their maximum values at 6 h. The hydrolysis efficiency at 6 h decreased as salinity increased: 2.42% at 0 psu, 1.78% at 15 psu, and 1.04% at 30 psu. The microbial community compositions at the genus level prominently differed in the relative abundances of dominant bacteria between 0 psu and 30 psu. The relative abundance of genera Iodidimonas and Tepidiphilus increased significantly as salinity increased. Increase in the salinity at which thermophilic aerobic digestion of aquaculture sludge was conducted altered the microbial community structure, which in turn decreased the efficiency of organic matter hydrolysis.

Spatial Variability of Micronutrient Status in Miyawaki Forest Development

Aim: This study aims to quantitatively analyze the spatial variability in the micronutrient status of soil by conducting a comparative assessment of soil samples from Miyawaki forest and adjacent barren land. By focusing on key parameters such as soil pH, organic matter content and micronutrient levels, the changes brought by the Miyawaki method of afforestation is being studied. Study Design: Soil samples were collected from the first Miyawaki forest established in Kerala and a comparative study was done with neighbouring undisturbed plot to analyse the changes that was brought about by the establishment of Miyawaki forest in the area. Place and Duration of Study: The Miyawaki forests selected for study was located in Puliyarakonam in Thiruvananthapuram district of Kerala, India. Methods: Representative soil samples were collected from the Miyawaki forest lands and neighbouring undisturbed plot from two depths and was subjected to various analyses. Results: The various soil chemical parameters were found to be enhanced by this method of afforestation indicating an improved soil fertility and soil health. Conclusion: The study highlights the significant benefits of Miyawaki forest restoration techniques on soil properties, which have far-reaching implications for both soil health and biodiversity. A higher OM (4.13%), available micronutrients (B-0.83 mg kg-1, Fe- 39.65 mg kg-1, Mn-30.53 mg kg-1, Zn-12.44 mg kg-1, Cu-8.90 mg kg-1) and pH (5.35) was observed in the Miyawaki forest in the surface soil. It was found that while the pH increased in the subsurface soil all the micronutrient concentration decreased with depth.

Environmental Impact Assessment of Solid Waste Disposal on Groundwater Quality

&lt;p class="CxSpFirst" style="text-align:justify;"&gt;&lt;span style="font-family:&amp;quot;Times New Roman&amp;quot;,&amp;quot;serif&amp;quot;;font-size:12.0pt;line-height:150%;text-autospace:none;"&gt;This study focuses on the impact of solid waste on groundwater quality in the region of Ramayanpatti, Tirunelveli. Tirunelveli city generates 100 tonnes of solid waste in a day. Solid waste has organic matter, inorganic matter, and moisture content which leaches dissolved organic matter, and heavy metals to the groundwater. Rainfall runoff carries all the dissolved contaminants from the solid waste and infiltrates into the groundwater. Groundwater quality is characterized at 30 locations around the dumping yard. Water Quality Index (WQI) is calculated using important characteristics such as pH, TDS, Calcium, Magnesium, Alkalinity, Sodium, Potassium, Chloride, Nitrate, and Sulphate by its relative weightage. The Spatial distribution of WQI is drawn.&amp;nbsp; Groundwater Quality is very poor in the surrounding region of solid waste dump yard and also in the areas of agriculture irrigated areas. Groundwater in other areas shall be used for domestic purposes except drinking with proper disinfection.&lt;/span&gt;&lt;/p&gt;&lt;p class="CxSpMiddle" style="text-align:justify;"&gt;&lt;span style="font-family:&amp;quot;Times New Roman&amp;quot;,&amp;quot;serif&amp;quot;;font-size:12.0pt;line-height:150%;text-autospace:none;"&gt;&lt;strong&gt;Keywords:&lt;/strong&gt; Solid waste, Groundwater Quality, Characterization, Water Quality Index, Groundwater use&lt;/span&gt;&lt;/p&gt;

Variability of Soil Aggregate Disintegration During Splash Erosion Under Different Circumstances

ABSTRACTThe duration of rainfall is a significant factor in the process of splash erosion. Nevertheless, there is a lack of comprehensive documentation regarding the extent and characteristic of soil aggregate disintegration resulting from raindrop impact during splash erosion. To examine the properties of the aggregate disintegration mechanism during various of splash erosion, three soil samples (S‐1, S‐2, and S‐3 labeled as the organic matter was 19.77, 31.70, and 26.83 g kg−1) were employed to simulated splash erosion under six durations of rainfall (5, 10, 15, 20, 30, and 40 min). Aggregates ranging in size from 1 to 5 mm were utilized in the preparation of test soils for different antecedent moisture contents (3%, 5%, 10%, and 15%). The result demonstrated that the slaking effect, as observed in the fast wetting of the Le Bissonnais method, is attributed to the sudden release of air entering the water, irrespective of the water immersion duration. Upon increasing moisture content, under fast wetting conditions, the mean weight diameter (MWD) values for S‐2 and S‐3 samples increased from 1.25 and 1.31 to 1.85 and 1.61, respectively. Subsequently, at a moisture content of 10%, the MWD decreased to 1.84 and 1.49 for S‐2 and S‐3 samples, respectively. In contrast, S‐1 sample exhibited an increasing trend from 0.34 to 0.93. The sensitivity of aggregates to disintegration from slaking (RSI) decreased by 0.58, 0.43, and 0.29, while mechanical impact (RMI) decreased by 0.23, 0.11, and 0.08 with increasing moisture content, respectively. The rate of splash erosion for the S‐1 sample exhibited an initial increase followed by a subsequent decrease as the duration of rainfall increased. The S‐1 sample, with the lowest organic matter content, exhibited the highest content of microaggregate content (&lt; 0.25 mm) of splashed particles (referring to soil particles transported out of the splash area by raindrops), ranging from 31.62% to 65.57%. The content of macroaggregate (&gt; 0.25 mm) in the residual soil (indicating soil particles that were left in the area affected by splashing) exhibited a gradual reduction as the duration of rainfall increased. As the soil reached saturation, the influence of physicochemical dispersion became more pronounced with the prolonged duration of rainfall. The forces of slaking and physicochemical dispersion predominantly disrupted &gt; 1 mm aggregates, while the destruction of aggregates within the 0.25–1 mm range was insufficient. This study is valuable for understanding the splash erosion process and provides a scientific foundation for the improvement of soil erosion prediction models.

Changes in Soil Physicochemical Properties and Fungal Communities Following a Forest Fire in the Pine Forest of Uljin, Republic of Korea

Soil samples from the rhizosphere of pine (Pinus densiflora) stands in the fire-disturbed Uljin forest were collected to analyze their physicochemical properties and fungal communities. In the burned area, soil pH decreased by 0.56, and organic matter content decreased by 0.32%p compared to the undisturbed area. Fungal community analysis revealed that all alpha diversity indices decreased in the burned area, but there were no differences according to fire severity. Soil pH, available phosphorus, and total nitrogen showed a positive correlation with the alpha diversity. Additionally, beta diversity analysis also indicated significant differences in the fungal communities between the burned area and the control sites (p value = 0.031). The changes in fungal communities were considered to be influenced by the decline in the order Atheliales, genus Russula, and genus Trechispora. A prediction analysis of the functional traits of fungi showed that the number of fungi involved in nutrient absorption and decomposition decreased in the burned area. It seems that the soil restoration of pine forests is progressing very slowly, as the soil fungi related to nutrient absorption by pine trees have not recovered even 18 months after the forest fire. Therefore, it is necessary to monitor continuous fungal communities in pine forest restoration after a forest fire to determine forest ecosystem restoration success and stabilization.

Application of electrochemical flow-through oxidation technology in the treatment of concentrated water from nanofiltration and reverse osmosis in the coal chemical industry

In the coal chemical industry, the concentrated waters produced by nanofiltration and reverse osmosis are usually evaporated and crystallized. During the evaporation crystallization process, high COD levels can lead to problems such as the entrainment of liquid droplets and excessive amounts of mother liquor. Therefore, there is an urgent need to develop efficient, stable, and engineering-applicable organic matter degradation technologies before the evaporation crystallization process. In this study, Ti-ENTA/SnO2-Sb and GF-5 were combined as cathodes to form an electrochemical flow-through oxidation system to treat nanofiltration concentrate (NFCs) and reverse osmosis concentrate (ROCs). The experimental results show that within the current density range of 10–20 mA·cm−2, the chemical oxygen demand (COD) removal rates of NFCs and ROCs are 55.3 %–85.2 % and 49.9 %–93.6 %, respectively. And the oxidation system can be used stably for a long time, fully meeting the practical application needs. In addition, this article further analyzed the effects of current density, initial organic matter concentration, pH value, and electrode spacing on COD removal. The results indicate that the COD removal efficiency is mainly affected by current density and initial organic matter concentration. Finally, a comprehensive comparison was made on the efficiency and cost of various advanced oxidation technologies in treating wastewater. The results indicate that the electrochemical flow-through oxidation system has significant cost advantages. The cost of processing NFCs and ROCs per cubic meter is $0.96 and $1.23, respectively. These findings indicate that the electrochemical flow-through oxidation system proposed is an advanced oxidation technology with economic benefits and practical application prospects.

Sugarcane bagasse derived biochar potential to improve soil structure and water availability in texturally different soils

Low organic matter content is one of the main constraints in arid and semiarid regions. This constraint and its negative influences on soils and plant growth may be alleviated by biochar (BC). Furthermore, improving soil physical and hydraulic attributes by application of biochar has received increased attention. Therefore, in the present study, the effects of sugarcane bagasse-derived biochar on the structural stability, water availability, and pore-size distribution (PSD) of three texturally different calcareous soils collected from different agro-climatologically regions were examined during a long-term experiment. Low and high-temperature biochars, produced in a muffle furnace by the traditional slow pyrolysis method at 300 °C (BC300) and 600 °C (BC600) were evaluated. Pots (15 kg) were filled with three different silty-clay Inceptisols (SCInc), silty-clay-loam Alfisols (SCLAlf), and loam Aridisols (LArid) soils mixed with 0 (control), 1, 2, and 3 w/w% of BC300 and BC600 during 540 days of incubation. The high energy moisture characteristic (HEMC) data was modeled using a modified van Genuchten function to quantify aggregate stability through stability ratio (SR) and structural stability index (SSI). The plant available water (PAW), least limiting water range (LLWR), and integral water capacity (IWC) were calculated with two matric suctions (h) of 330 cm for field capacity (FC) and 15,000 cm for permanent wilting point (PWP). Then the integral energy (EI) values were calculated (EIIWC). Results indicated that the incorporation of 3 w/w% biochar significantly (p < 0.01) increased SR (35 to 100%) and SSI (21 to 28%) indices in all three soils. Biochar significantly increased modal suction (MS) in LArid soils (5 to 158%); whereas, decreased MS of the other soils (3 to 43%). MS, SR, and SSI of BC300 and BC600-treated soils were not significantly different. PAW, LLWR, and IWC significantly decreased in the SCInc (18 to 61%, 8 to 44%, and 6 to 35%) and SCLAlf (8 to 44%, 18 to 35%, and 20 to 47%) soils and increased in LArid (4 to 54%, 3 to 61%, and 24 to 111%) soil with increasing biochar doses. There were no changes in EIIWC in biochar-treated LArid soil where PAW, LLWR, and IWC increased. Biochar increased EIIWC across the studied soil from 1% to 3.38 folds, thereby increasing the gradient of water potential to absorb the available water. Soil and soil-biochar mixtures exhibited heterogeneous and multimodal pore-size distribution (PSD). Biochar promoted the PSD peaks related to water-transmitting pores in SCInc and SCLAlf soils while decreased in LArid soil. In conclusion, results indicated that among the applied levels of biochar, the application of 3 w/w% biochar is suggested as a suitable way to improve soil physical behavior and structural stability.

Intercropping increases plant water availability and water use efficiency: A synthesis

Intercropping, involving the incorporation of annual crops with alternative crops or non-crop cash crops, has the potential to enhance water conservation and stabilize agroecosystems. However, few studies have comprehensively explored the effects of intercropping on water cycling. Here, we investigated the impacts of intercropping on five crucial water cycle processes (states): soil water content (SWC), runoff (RO), soil evaporation (E), leaf transpiration (LT), and water use efficiency (WUE). To this end, a meta-analysis was carried out utilizing a global dataset comprising 1285 paired observations from 64 publications. We found that intercropping reduced SWC (1.31 %), RO (29.17 %), and E (10.30 %), but increased LT (9.85 %) and WUE (29.46 %). The effects of intercropping on SWC, E, and RO did not exhibit significant fluctuations over the course of a year, but SWC initially decreased then increased in multi-year planting durations. Moreover, the intercropping effect was contingent upon climatic conditions (mean annual precipitation and temperature), soil characteristics (organic matter content, bulk density, and total nitrogen content), and agricultural practices (crop type, fertilization, and irrigation). We determined that resource complementarity, abiotic facilitation, and biotic feedback mechanisms may underlie the effect of intercropping on the water cycle. This research underscores the potential of using intercropping to improve plant water usage and the sustainability and productivity of cropping systems.

Plant-Parasitic and Free-Living Nematode Community Associated with Oak Tree of Magoebaskloof Mountains, Limpopo Province, South Africa

A study was conducted in the mountains of Magoebaskloof, Limpopo Province, where oak trees grow along the banks of the Broederstroom River. This study revealed that 22 nematode genera were associated with oak trees (Quercus robur). The most frequently occurring nematodes were Aphelenchus sp. (100%) and Plectus sp. (100%), followed by Helicotylenchus sp. (90%). This study examined the relationship between nematodes and the physicochemical properties of the soil using Pearson correlation. It uncovered that the organic matter content (OMC) had a negative correlation with the number of Panagrolaimus sp. (r = −0.770) and Hemicycliophora sp. (r = −0.674). Conversely, the sand percentage positively correlated (r = 0.695) with the number of Hemicycliophora sp. The clay content of the soil showed a positive correlation (r = 0.617) with the number of Ditylenchus. Soil pH demonstrated a significant negative correlation with Acrobeloides sp. (r = −0.877). The canonical correspondence analysis (CCA) explained 63.3% of the relationship between nematodes and soil physicochemical properties. The CCA results indicated that Ditylenchus exhibited a positive correlation with OMC, while the Panagrolaimus and Hemicycliophora species showed a negative correlation with OMC. The results indicated that none of the soil sample sites were under stress. The soil food web analysis revealed that most soil samples were nutrient-enriched with a low C/N ratio. In conclusion, this study revealed that oak trees harbor a high diversity of plant-parasitic and free-living nematodes. The results suggest that soil nematodes, particularly free-living bacterivores, such as Panagrolaimus, can indicate organic matter content in the soil.