Insoluble Dietary Fiber Contents Research Articles

Solid-State Fermentation of Wheat Bran with Clostridium butyricum: Impact on Microstructure, Nutrient Release, Antioxidant Capacity, and Alleviation of Ulcerative Colitis in Mice.

This study investigated the effects of solid-state fermentation with Clostridium butyricum on the microstructure of wheat bran, the release of dietary fiber and phenolic compounds, and antioxidant capacity. Compared with unfermented wheat bran, insoluble dietary fiber and phytic acid content decreased, whereas soluble dietary fiber and water-extractable arabinoxylan content increased in C. butyricum culture. Because of the increased release of phenolic compounds, such as ferulic acid and apigenin, and organic acids, such as isobutyric acid, the antioxidant capacity of the culture was considerably improved. Furthermore, the culture of C. butyricum treated with dextran sulfate sodium-induced ulcerative colitis in mice enhanced the expression of intestinal mucus and tight-junction proteins, modulating the gut microbiota structure, increasing the levels of short-chain fatty acids in the intestine, and restoring the essential functions of the gut microbiota. These anti-inflammatory effects stemmed from the combined action of various effective components.

Effect of spray-drying or fermentation on the solubility and carbohydrate profile of chickpea hydrolysates for beverage formulation

Powder beverage bases were developed using extruded and hydrolyzed chickpea supernatant through freeze-drying. This study evaluated the effects of spray-drying and adjuvant incorporation for producing powders and supernatant fermentation with LAB strains prior freeze-drying on the carbohydrate composition, structural integrity, and physical properties of chickpea beverage base powders. All powders had low insoluble (<0.2%) and soluble (<3%) dietary fiber contents due to processing. Starch content decreased below 9.49% when using adjuvants and 10.61% during fermentation. Both treatments also reduce raffinose oligosaccharide content below 6.1 mM/100 g. Spray-drying and adjuvant addition promoted a more amorphous starch structure, enhancing solubility, while fermentation induced more crystallinity, according to FTIR data. Microscopy showed small particle clusters and lack of birefringence. SEM images revealed starch granule damage from both fermentation and spray-drying, with more uniform particles in spray-dried powders. Spray-drying resulted in the smallest particle sizes (455-457 nm) and higher absolute zeta potential (8.12-9.51), indicating greater stability. Fermentation had the opposite effect, negatively impacting the colloidal system stability. Samples had a pH close to 6, except fermented powders with a pH of 3.6, affecting colloidal stability. Fermentation significantly reduced solubility but without practical implications, as all samples had solubility values over 93%, which is desirable for beverage-based powders. Spray-drying and fermentation altered the carbohydrate profile and structure of the powders. Fermentation prior producing powders may provide benefits, but it slightly decreases the system stability. Spray-drying can be used instead of freeze-drying to produce stable chickpea base powders that are highly soluble.

Classification of select functional dietary fiber ingredients based on quantitative properties and latent qualitative criteria.

Functional dietary fiber ingredient (FDFI) functionality can depend on the fibers' chemistry, composition, size, botanical origin, and microstructure. However, such claims have never been generalized for a broad range of fibers in one study before. To support these claims, 23 FDFIwere characterized based on 11 physicochemical, physical, and compositional property measurements: Water- and oil-holding capacity (WHC and OHC), water absorption and solubility indices (WAI and WSI), flour-swelling potential (FSP), particle size distribution (D10, D50, and D90 values), and soluble, insoluble, and total dietary fiber content. Multivariate statistical techniques were employed to partition fiber ingredients into functional categories based on these quantitative data, and scanning electron microscopy was used to examine the microstructure of the FDFI. Strong correlations (p<0.05) were found among many of the physicochemical properties measured, and five categories based on quantitative physicochemical functionality, size, and fiber composition were ultimately found. Distinct patterns emerged between these quantitative partitions and the latent microstructure features and botanical origins of the FDFI. These results can be combined into one intuitive summary of FDFI functionality based on the described quantitative and qualitative observations. Such summaries are useful for ingredient suppliers or product developers with limited resources to infer the general functionality, structure, and food applications utility of their materials based on a subset of the information provided here. PRACTICAL APPLICATION: The quantitative and qualitative relationships among a range of commercially available functional dietary fiber ingredients are documented. Industry may utilize this information to predict the general functionality of their ingredients based on a subset of the information provided here by assuming that the same relative relationships will exist. This cansave time during the ingredient screening process, either for product developers looking to optimize a formulation or for ingredient suppliers doing new ingredient applications testing.

Dynamic high pressure microfluidization modified oat dietary fiber: Texture modulation and its mechanistic in whole grain oat milk

Oat dietary fiber (ODF) could product some undesirable textures such as rough and thick when added to food products, resulting the waste of resources. In this study, dynamic high pressure microfluidization (DHPM) was used to treat ODF in different pressures, and ODF was backfilled into whole grain oat milk (WOM) to investigate the efficiency of DHPM in improving the undesirable taste from ODF. The physicochemical properties and the microstructure of the DHPM-treated ODF were also determined to investigate the modification mechanism. The results showed that the WOM with DHPM-treated ODF conferred lower particle size (D[90] decreasing by 22.80%–51.35%), firmness (decreasing by 0.08%–9.84%), apparent viscosity and coefficient of friction, especially 120 and 150 MPa. Meanwhile, the samples with DHPM had higher sensory scores such as particles detected (swallowing and after swallowing increasing by 38.10%–85.71% and 29.17%–62.50% respectively), smoothness (increasing by 6.9%–27.59%), and mouth-coating, indicating that DHPM treatment could improve the undesirable texture brought by ODF. In addition, DHPM treatment reduced the particle size and insoluble dietary fiber content and fragmented microstructure of ODF, it may weaken the particles detected and improve the smooth taste. The consistency coefficient of ODF decreased from 0.0091 (0 MPa) to 0.0038 (150 MPa), which could be related to the improvement of texture flow and mouth-coating. In conclusion, WOM with DHPM-treatment ODF improved the undesirable texture such as roughness and stickiness, possibly associated with the ability of DHPM to alter the particle size, apparent viscosity and microstructure of ODF. This study provided the method of modification and utilization of ODF, and provided the idea and feasible solution for preparation of WOM.

Bioactive Compounds, Health Benefits and Food Applications of Artichoke (Cynara scolymus L.) and Artichoke By-Products: A Review

Cynara scolymus L. is an herbaceous plant originally from the western Mediterranean area, with Italy, Spain and France the main being producers. Both the edible flowering head and the by-products generated during processing (outer bracts, leaves and stem) are characterized by a high content of essential vitamins, minerals and bioactive compounds. In particular, the leaves represent a great source of phenolic acids derived from caffeoylquinic acid or flavonoids such as luteonin and apigenin, while the head and stem contain a high content of soluble and insoluble dietary fiber, especially inulin and pectins. Its high content of bioactive compounds provides artichoke a high antioxidant power due to the modulation effect of the transcription factor Nrf2, which may lead to protection against cardiovascular, hepatic and neurological disorders. The potential use of artichoke as a functional ingredient in the food industry may be promising in terms of improving the nutritional value of products, as well as preventing oxidation and extending the shelf-life of processed foods due to its antimicrobial activity. This review aims to provide an overview of the nutritional qualities of Cynara scolymus L. and its by-products, focusing on the possible health effects and potential applications in food products as a higher-value-added alternative ingredient.

Dietary fibre profiling of various edible parts of winged bean (Psophocarpus tetragonolobus L.): Pods, whole seeds, endosperms, seed coats, and cooked seeds

This study aimed to identify the dietary fibre profiles of various winged bean components (green pods, whole seeds, endosperms, seed coats, and canned whole seeds). Soluble dietary fibre (SDF), insoluble dietary fibre (IDF) (hemicellulose, cellulose, and lignin), total dietary fibre (TDF), and oligosaccharide components (raffinose, stachyose, and verbascose), were analyzed. The various winged bean components had a higher IDF content than SDF content (21.12–50.11% and 0.83–1.25%, respectively), with the highest TDF content observed in the seed coat (51.81%). Raffinose was the most dominant oligosaccharide component in green pods (2.7 mg/g), while verbascose was the most dominant component in all seed form samples, including seed coats (1.41–3.65 mg/g). The IDF in all samples was dominated by cellulose (5.07–39.34%), followed by hemicellulose (1.5–27.19%), and lignin (0.09–0.98%). Seed dehusking led to significant decreases in all types of dietary fibre analyzed, except for stachyose. Soaking and sterilization processes resulted in an increase in SDF, but decreased IDF, stachyose, verbascose, and hemicellulose compared to raw whole seeds. Principal component analysis (PCA) revealed that raw whole seeds still exhibit similarities in dietary fibre composition with canned seeds, but differ from green pods, endosperms, and seed coats. These findings imply that all edible parts of winged beans offer a large quantity of dietary fibre, especially whole seeds, which have potential benefits as prebiotic sources to improve health.

Effects of insoluble dietary fiber from mung bean skin on dough and gluten protein properties

Abstract In this study, the influences of the addition of different mung bean skin insoluble dietary fiber (MIDF) contents (0–10 wt%) on the properties of dough and gluten proteins were investigated. With the addition of MIDF, the elastic modulus, viscosity modulus, and loss factor of the dough all showed increasing trends. Additionally, the bound water content significantly increased by 15.37 % (P &lt; 0.05), while the weakly bound water content decreased by 14.32 % (P &lt; 0.05), indicating the migration of weakly bound water to bound water. These changes resulted in increased hardness, chewiness, and gumminess of the dough. Furthermore, the incorporation of MIDF significantly reduced the SS content in gluten by 43.01 % (P &lt; 0.05). Concurrently, the secondary structure of gluten protein transformed from ordered structures, such as α-helices and β-sheets, to disordered structures, such as random coils and β-turns, thereby loosening the protein skeleton structure and affecting the gluten network. These results established a theoretical foundation for the development and enhancement of functional foods enriched with dietary fiber.

Biologically active substances and safety of apples of different varieties of the Ural selection

Fresh apple fruits contain various components, including mono-, di- and polysaccharides, organic acids, triterpenoids, phytosterols, polyphenols, protein, vitamins, and macro- and microelements humans need. The purpose of the research was to study the biologically active substances and safety of apples of five varieties of winter and autumn ripening: Pervouralskaya, Krasa Sverdlovskaya, Blagovaya Vesti, Sverdlovchanin, Ekrannoe - to identify the most valuable fruits from the standpoint of modern nutritionology. The apple trees grew in equal climatic and agrotechnical (drip irrigation and fertigation) conditions IP GK(F) H Filippova A.A. (Chelyabinsk region, Kaslinsky district, Grigoryevka village). It was found that the content of insoluble dietary fiber in apples of the studied varieties did not have sharp fluctuations; the variability of the indicator was 14.3%. On the contrary, the amounts of vitamin C, pectin, polyphenols, and flavonoids had significant variability - up to 275, 100, 61, and 50%, respectively, depending on the variety. Safety indicators (content of Hg, Pb, patulin, HCH, DDT) in apples did not exceed the standards of TR CU 021/20H. The nitrate content in fruits was typical for the products of intensive apple orchards. At the same time, Pb levels varied from 0.036 to 0.103 mg/kg, nitrates - from 23.4 to 35.4 mg/kg. Increased amounts of studied biologically active substances and low levels of contaminants make it possible to classify apples of the Pervouralskaya and Krasa Sverdlovsk varieties as the best fruits of this apple orchard.

Increasing the content of fiber and minerals in gnocchi with added dragon fruit peels as sub stitution of ingredient for improvement of food product quality and human health

Gnocchi is a type of homemade pasta made from potatoes, flour and eggs. Improving food product quality in terms of nutrition in gnocchi products it is possible now also use food waste. In addition to improvement of food product quality and human health, the addition of dragon fruit peel, which is considered as waste, can provide reasonable solutions or ideas about recycling of food waste. In this study, the produced food product was gnocchi with addition of by-product — dragon fruit peel, which was tested for fiber content and content of the following minerals: iron, potassium, calcium. The data obtained were then analyzed statistically by the SPSS program to determine the effect of variation using the T-test. Based on the results of the study it was concluded that the content of dietary fiber of dragon fruit peel in the sample of gnocchi denoted as F3 featured the highest water-soluble dietary fiber content with a score of 1.33%, water insoluble dietary fiber content with a score of 1.86%. and total dietary fiber content with a score of 3.19%. This also shows that the more dragon fruit peel is added, the higher is the total dietary fiber content in gnocchi with addition of dragon fruit peel. This high dietary fiber will be beneficial to humans, especially good for the digestive system. Meanwhile, the mineral content of gnocchi with dragon fruit peel also showed that the F3 sample had the highest mineral content, in particular — iron (Fe) in amount of 1.886 mg/100 g, potassium (K) 6.179 mg/100 g, and calcium (Ca) in amount of 25.339 mg/100 g. This also shows that the addition of dragon fruit peel is useful for improvement of human health and the quality of food product, i. e. gnocchi by increasing the total content of dietary fiber and improving the mineral composition of gnocchi due to addition of dragon fruit peel.

Investigation of the sensory quality, nutritional value and antioxidant capacity of flakes prepared using various pigeon pea-based flours

Pigeon pea (Cajanus cajan (L.)) is a potential source of nutritional and antioxidant compounds. Germination proved to improve the nutritional quality and antioxidant capacity of pigeon peas. The previous author’s study showed that pigeon pea flour prepared by NaCl elicitation before germination exhibits significantly higher antioxidant capacity and functional properties than that prepared without elicitation or germination. The study aimed to examine the sensory quality, nutrition value, and antioxidant capacity of flakes formulated using non-germinated pigeon pea flour, pigeon pea sprout flour, and NaCl-elicited pigeon pea sprout flour. The potential of the flours to be developed as commercial flakes was also determined using oat-based commercial flakes as a comparator. The NaCl-elicited pigeon pea flour-based flakes showed a higher quality score of both texture and overall qualities than the other pigeon pea flour-based flakes and the commercial ones. Regarding nutritional value, flakes formulated using NaCl-elicited pigeon pea sprout flour also showed better nutritional value, indicated by the lowest fat content and highest soluble, insoluble, and total dietary fiber contents. The highest values of total phenolics content (TPC), Trolox equivalent antioxidant capacity (TEAC), and ferric reducing antioxidant power (FRAP) were also observed in the NaCl-elicited pigeon pea sprout flour-based flakes, even though its DPPH radical scavenging activity was not significantly different to the commercial flakes. These results have significant consequences for developing legume-based flakes with higher levels of dietary fibers and antioxidant potential, and lower fat content.

Development of fibre-rich okara-based expanded snack via single screw extrusion

Okara is a by-product of the soymilk and tofu manufacturing industry. Recently, changes in lifestyle and eating patterns led to higher demands for snack foods produced via extrusion technology. Extruded products enriched with okara, which consists of high dietary fibre content, can increase the nutritional quality of extruded snacks with higher commercial values. This study aimed to determine the influence of okara levels; 0, 5, 10, and 15% (w/w) on properties of extrudates in terms of fibre content, water activity, bulk density, expansion ratio, colour, textural (hardness and crispness), and microstructure. The increment of okara level resulted in the reduction of water activity, expansion ratio, lightness, and crispness of extrudates while, soluble and insoluble dietary fibre content, bulk density, and hardness were increased. Extrudate produced at higher levels of okara had a rougher surface, smaller air cells, and thicker walls. A collapse in cell structure was observed at 15% okara. In conclusion, fibre-enriched extrudate with desirable characteristics can be obtained at a 5% okara level. This study provides a promising application in harnessing the nutritional benefits of okara.

Effects of dietary fibre source and content and extrusion conditions on the physicochemical composition and physical quality of fibre‐enriched lentil snacks

SummaryThe growing recognition of the health benefits associated with dietary fibre and the deficit in its daily intake are propelling the food industry to develop a variety of fibre‐enriched products including puffed snacks. Incorporating rich sources of fibre into pulse‐based foods can supplement the insufficient daily dietary fibre intake. To produce fibre‐enriched puffed pulse snacks and ready‐to‐eat breakfast cereals, three different fibre sources, namely carrot powder (CP), wheat bran (WB) and red lentil hulls (LH), were added to red lentil (RL) flour at 0%, 10% and 20% levels (w/w) and extruded at three extrusion moisture contents (MC), i.e., 18%, 20% and 22% (db). Incorporation of all three fibres into RL flour significantly (P ≤ 0.05) increased the total and insoluble dietary fibre contents and hardness and decreased the expansion index, brightness and crispiness of extrudates. Scanning electron microscopy images revealed that the fibre‐enriched extrudates had thicker cell walls with smaller cells when qualitatively compared to RL extrudates with no fibre addition. CP containing extrudates had significantly (P ≤ 0.05) higher soluble dietary fibre (SDF) content compared to extrudates containing WB and LH. WB containing extrudates were significantly (P ≤ 0.05) harder and less expanded than CP and LH containing extrudates at the same MC. The increase in fibre incorporation level increased the hardness of CP and WB containing extrudates but did not affect LH containing extrudates. Fibre incorporation level also increased the colour differences between RL extrudates with and without fibre enrichment. Increasing MC significantly (P ≤ 0.05) increased the SDF and hardness and decreased the expansion index of extrudates. These results can potentially pave the way for the production of fibre‐enriched pulse‐based puffed products, namely, snacks and ready‐to‐eat breakfast cereals, that are texturally and structurally appealing to consumers.

Composition, structural, physicochemical and functional properties of dietary fiber from different milling fractions of black rice bran

Black rice bran is a superior dietary fiber (DF) resource. However, the lack of specific distribution and functionality of DF in black rice bran has constrained its refined processing. This study divided black rice bran into five equal bran fractions (BF) by stepwise milling to obtain BF1(outermost layer) to BF5 (the innermost layer). The contents, structure, physicochemical and functional properties of DF in each bran fractions were investigated. The results revealed that the insoluble, soluble and total dietary fiber (IDF, SDF and TDF) contents were 17.52 ± 0.48 to 31.14 ± 0.96, 2.03 ± 0.20 to 3.86 ± 0.01 and 19.57 ± 0.28 to 34.61 ± 1.10 g/100 g dry basis, respectively. Compared to BF1, the TDF content of BF2–BF5 was reduced by 3.90, 3.20, 21.74 and 43.46%, respectively. The main monosaccharides in both IDF and SDF were xylose, glucose, arabinose and galactose. The molecular weight of SDF samples ranged from 17.19 ± 1.95 to 36.32 ± 0.80 kDa. The outer bran fractions (BF1–BF3) IDF exhibited higher water swelling, water retention, oil adsorption capacity, together with cholesterol and sodium nitrite adsorption capacity than those of inner bran fractions (BF4–BF5), owing to their lower crystallinity and well-developed porous structure. These results provide essential data for the development of black rice DF-based food processing with enhanced functional benefits.

Effect of steam explosion treatment on structural and physicochemical properties, and potential application of soluble dietary fiber from grain and oil processing by‐products: A review

AbstractBackground and ObjectivesGrain and oil processing by‐products contain dietary fiber with high quality, but most of them have not been utilized due to their high content of insoluble dietary fiber and coarse texture, which are detrimental to the quality improvement of cereal food.FindingsSteam explosion treatment can transfer dietary fiber from insoluble to water‐soluble resulting in a high content of water‐soluble dietary fiber. The content of soluble dietary fiber in cereal processing by‐products with steam explosion treatment is increased from 27.48% to 171% via optimal conditions of steam explosion treatment. The structure of dietary fiber from cereal processing by‐products is disrupted to a honeycomb porous shape, therefore, the physicochemical properties of dietary fiber are improved, such as hydration capacity, oil, cholesterol, and bile salts binding capacity, hypoglycemic capacity, and antioxidant activity.ConclusionsSteam explosion treatment is a rapidly developing and extremely promising pretreatment technology for physicochemical properties enhancement of dietary fiber from grain and oil processing by‐products.Significance and NoveltyThis review can provide some useful references for the properties improvement of soluble dietary fiber in grain and oil processing by‐products by steam explosion pretreatment. It may facilitate the application of soluble dietary fiber in the food industry.

Quality of High-Fibre Pasta Supplemented with Watermelon Rind Powder with Different Particle Sizes.

Watermelon rind, a by-product of watermelon juice processing, contains large amounts of dietary fibre and phenols with antioxidant capacity. The use of agro-industrial by-products would both improve economic benefits and reduce environmental emissions. The aim of this research is to examine the effect of the particle size of watermelon rind powder on the quality of high-fibre pasta. The nutritional, physical and physicochemical quality of three samples of watermelon rind powder, sieved through three sieves with aperture size of 400, 210 and 149 μm, were analysed. Durum wheat semolina with watermelon rind powder mass fraction of 10 % were mixed and used to make pasta. Nutritional, textural and cooking quality, sensory acceptability, in vitro glycaemic index and antioxidant bioaccessibility of high-fibre pasta with added watermelon rind powder of different particle sizes were evaluated and compared. When the sieve aperture size was reduced from 400 to 149 µm, the soluble dietary fibre and total phenolic contents of watermelon rind powder were increased by 35 and 15 %, respectively, while its insoluble dietary fibre content was decreased by 21 %. Decrease in sieve aperture size from 410 to 149 µm reduced phenolic bioaccessibility of the fortified pasta from 63 to 57 %, but enhanced its predicted glycaemic index from 50 to 69. It also decreased the pasta hardness by 13 %, but improved its elongation rate and tensile strength by 13 and 40 %, respectively. The finer the particles of the watermelon rind powder, the longer the optimal cooking time, the higher the water absorption index, and the lower the cooking loss of the supplemented pasta. Consumers did not notice any significant differences in the overall acceptability among all pasta samples. The particle size of the watermelon rind powder had a major effect on nutritional value, texture and cooking quality of the fortified pasta. In particular, the predicted glycaemic index and antioxidant bioaccessibility of high-fibre pasta were significantly affected by the particle size of the dietary fibre material used in the recipe.

Enzymatic degradation of pea fibers changes pea protein concentrate functionality

Pea proteins are gaining increased interest from both the food industry as well as from consumers. Pea protein isolates (PPI) excel at forming meat-like textures upon heating while pea protein concentrates (PPC) are more challenging to transform into highly sought-after foods. PPCs are richer in dietary fibers (DF) and are more sustainable to produce than PPI. In this work, degradative enzymes were used to modify the functionality of PPC-water blends with a focus on texturization upon heating. Three enzyme solutions containing β-glucanases, hemicellulases, pectinases, xylanase, and cellulases were added to 65 wt% PPC blends. The effect of these enzymatic pretreatments was measured by monitoring the torque in a mixing reactor during blending, differential scanning calorimetry (DSC), high-pressure shear rheology (HPSR), and DF content and size analysis. Four endothermic peaks were detected in the DSC thermograms of PPC, namely at 63 °C, 77 °C, 105 °C and 123 °C. The first three peaks were attributed to phase transition and gelation temperatures of the starches and proteins constituting PPC. No endothermic peaks were measured for PPI blends. Enzyme solutions containing β-glucanases, hemicellulases, pectinases, and xylanases increased the endothermic energy of all peaks, hinting at an effect on the gelation properties of PPC. The same enzymes decreased the resistance to flow of PPC blends and induced a shift of the weight average molecular weight (Mw) distribution of soluble dietary fibers (SDF) towards smaller values while increasing the fraction of SDF by decreasing the insoluble dietary fiber (IDF) content. The solution containing cellulases did not change the DSC results or the viscosity of the PPC mixture, nor did it affect the IDF and SDF contents. On the other hand HPSR measurements of heated PPC samples up to 125 °C showed that all tested enzyme solutions decreased the complex viscosity of PPC-water blends to values similar to PPI-water blends. We demonstrated that degradative enzymes can enhance the functionality of less refined protein-rich ingredients based on pea and other vegetal sources. Using optimized enzyme blends for targeted applications can prove to be a key changer in the development and improvement of sustainable protein-rich foods.

Effect of insoluble dietary fiber on printing properties and molecular interactions of 3D-printed soy protein isolate-wheat gluten plant-based meats

Insoluble dietary fiber (IDF) has been characterized to prevent chronic diseases and improve gastrointestinal health, and it has been added to 3D printing plant-based meats (PM) to enhance texture and increase nutritional properties. Therefore, the aim of this study was to investigate the effects of IDF on 3D printing properties and molecular interactions of soy protein isolate (SPI) - wheat gluten (WG) PM. Without the participation of IDF, PM appeared to collapse. When the IDF concentration increased from 0 to 10 %, PM displayed good printing properties, water holding capacity, tensile strength, and elongation at break were increased. Tensile strength and elongation at break reached a maximum at 10 % IDF, and clearly similar results were found for texture attribute indices such as hardness, gumminess, chewiness, and cohesiveness after cooking. All printing inks exhibited shear-thinning behavior and solid-like viscoelasticity, but the structural recovery properties of 3D-printed PM deteriorated when the IDF content was over 10 %. Intermolecular forces indicated that the addition of IDF enhanced the disulfide bonds so that 10 % IDF presented better printing properties. These results indicated the potential for developing PM with dietary fiber functionality through 3D printing technology.

Effects of the Incorporation of Male Honey Bees on Dough Properties and on Wheat Flour Bread's Quality Characteristics.

Two different levels (5 and 10%) of male honey bees (drones) in powder form were incorporated into wheat flour, and their impact on dough properties and on bread-quality characteristics were investigated. The incorporation of the drone powder to the wheat flour caused a decrease in the extensibility and energy of the dough in the extensograph and an increase in the dough's maximum resistance with increasing levels of the added drone powder. The elongational viscosity values of the dough fortified with drone powder were significantly higher than those of the control wheat flour dough. The breads supplemented with 10% drone powder exhibited lower lightness (L*) values compared to the control bread. The addition of drone powder led to an increase in the total dietary fiber content and insoluble dietary fiber content in the fortified bread. Significant differences in the specific volume values were observed between the control bread and the corresponding ones with 10% drone powder. Upon storage, the moisture content of the crumb of the control bread and of the fortified breads were both significantly decreased, while the addition of the drone powder to the wheat flour bread increased the crumb hardness and gumminess but decreased the cohesiveness of the breads.

Dietary fibre fractions rich in (poly)phenols from orange by-products and their metabolisation by in vitro digestion and colonic fermentation

Orange peel is an interesting by-product because of its composition, particularly its dietary fibre and flavanones. The aim of this work was to extract different fibre fractions from orange peel to obtain potential added-value ingredients and evaluate how the presence of fibre may interfere with (poly)phenol metabolism. Using an aqueous extraction, as a green extraction method, an insoluble fibre fraction (IFF) and a water-soluble extract (WSE) were obtained. Those fractions were analysed to determine the proximate and dietary fibre composition, hydration properties, (poly)phenol composition and antioxidant capacity, comparing the results with the orange peel (OP). The IFF presented the highest content of insoluble dietary fibre and the WSE showed the highest content of (poly)phenols, these being mainly flavanones. An in vitro faecal fermentation was carried out to evaluate the production of short-chain fatty acids (SCFAs) and lactate as prebiotic indicators; the IFF gave the highest production, derived from the greater presence of dietary fibre. Moreover, catabolites from (poly)phenol metabolism were also analysed, phenylpropanoic acids being the major ones, followed by phenylacetic acids and benzoic acids. These catabolites were found in higher quantities in WSE, because of the greater presence of (poly)phenols in its composition. IFF also showed a significant production of these catabolites, which was delayed by the greater presence of fibre. These results reveal that the new ingredients, obtained by an environmentally friendly water extraction procedure, could be used for the development of new foods with enhanced nutritional and healthy properties.

Fermentation of Lactobacillus fermentum NB02 with feruloyl esterase production increases the phenolic compounds content and antioxidant properties of oat bran

In this study, strains producing feruloyl esterase were screened by Oxford Cup clear zones method and by evaluating the ability to decompose hydroxycinnamoyl esters. The strain was identified by 16S rDNA molecular biology. The contents of dietary fiber, reducing sugar, water-extractable arabinoxylans, phytic acid, total phenolics, total flavonoid, phenolic compounds composition, microstructure and antioxidant activity in bran before and after fermentation were studied. Eight strains producing feruloyl esterase were screened, among which strain P1 had the strongest ability to decompose hydroxycinnamoyl esters. The strain was identified and named L. fermentum NB02. Compared with unfermented bran, fermented bran exhibited higher contents of soluble dietary fiber, reducing sugar, water-extractable arabinoxylans, total phenolics, total flavonoid, and lower insoluble dietary fiber and phytic acid content. The dense surface structure of bran was destroyed, forming a porous structure. The release of phenolic compounds increased significantly. L. fermentum NB02 fermentation improved the antioxidant capacity of bran.