When bipedal robots walk, the compliance of local contact zone and whole structure usually causes high amplitude contact force and wave propagation excited by impact. The object of this paper is to analyze the transient contact-impact behavior during the walking of compliant bipedal robots (CBR) using a completely flexible body model (CFBM) and obtain its fine contact modes. The applicability of the traditional method based on completely rigid body model (CRBM) to the compliant bipedal robots is also discussed. In CFBM, the structural deformation field and inertial field are discretized by finite element theory, and the penalty function method is adopted to account for the unilateral contact constraint. The dynamic equations, strain and stress equations for the CFBM are derived. The contact forces, impact-induced wave propagation and total mechanical energy of the CBR are calculated. The results show that the relative contact motions between the foot and the slope experience two phases: (1) macroscopic oblique impact phase (duration time is 0.1∼0.2 s) and (2) rolling phase (duration time is 0.6∼0.7 s). Phase 1 consists of a series of fast normal contact-separation switches and tangential stick–slip switches. Phase 2 means there are continuous normal compression and tangential stick. Since the traditional method neglects the first phase, it is not comprehensive for investigating the CBR with impact-induced waves and vibration, especially for the case of lower coefficient of friction (COF) μ. In addition, a ‘dynamic self-locking’ phenomenon is found as μ>0.9, which will lead to the walking unstable.