Simulated Conditions Research Articles

Characterization and electrochemical performance of plasma-nitrided titanium alloy for bipolar plates

Ti-N layer with a thickness about 1 ∼ 2.2 μm was formed on titanium alloys through plasma nitriding at 750 °C in NH3 and a mixture of NH3 and N2 (1:2) for 4 h. SEM and XRD were employed to characterize the microstructure and phase composition of nitrided layer. Electrochemical tests evaluated the anti-corrosion properties of the samples before and after nitrided in a simulated proton exchange membrane fuel cells (PEMFC) environment. Interface contact resistance (ICR) was also measured. Results indicated that the corrosion potential in cathodic conditions was increased from −415 mV for untreated titanium to 148 mV for that nitrided in mixture gas. While, the corrosion current density was reduced from 6.64 μA to 0.86 μA. Under a pressure of 140 N cm−2, the interfacial contact resistance of the untreated sample increased from 22.1 mΩ cm2 before corrosion testing to 40.5 mΩ cm2 after corrosion at cathodic conditions. The nitrided sample, on the other hand, saw its contact resistance rise from 4.5 mΩ cm2 before corrosion to 7.3 mΩ cm2 after corrosion. The Ti-N compound layer effectively diminished the corrosion current density and sustained an exceptionally low ICR under the simulated operating conditions of a bipolar plate.

Impact of Hearing Aid Processing Delay on Stop Consonant Voicing Perception in Open Fittings.

Hearing aid (HA) processing delay results in asynchronous overlap of the input sound and the delayed amplified sound at the eardrum in open-ear fittings. This may distort the temporal cues used for stop-consonant voicing distinctions. The current study evaluated the impact of HA processing delay on voiced-voiceless categorization of syllable initial consonants /d/ and /t/ for a range of voice onset times (VOTs). Nineteen older listeners (Mage = 73 years) with mild-moderate sensorineural hearing loss participated. All listeners performed the voiced-voiceless categorization task in double-blind within-subjects design. Thirteen stimulus tokens along the /di:/ - /ti:/ continuum were created by varying VOTs. Stimuli were then processed using an HA simulator, which simulated the overall sound pressure levels measured at the eardrum in open-ear fittings with four processing delay times (0, 0.5, 5, and 8 ms). Individualized stimuli were generated for each listener based on their audiogram and presented via calibrated ear inserts at the most comfortable listening level. Performance across all VOT intervals was fitted with psychometric functions, which were then used to estimate the voiced-voiceless crossover point and the slope parameter for each simulated delay condition. The crossover point along the voiced-voiceless continuum shifted systematically with increased processing delay toward voiced /di:/ over unvoiced /ti:/ percepts. The shift in the crossover point between the 0-ms reference condition and the 8-ms processing delay condition corresponded to 5.8 ms of change in VOT. The 8-ms processing delay condition resulted in significantly shallower categorization slopes compared to the 0- and 0.5-ms delay conditions. Temporal distortions created by HA processing delay in open-ear fittings impacted voicing perception of syllable initial stop-consonant stimuli near the voiced-voiceless crossover point. Short HA processing delay should be considered for open-ear fittings to preserve the natural VOT cues used for voicing detection.

Time to reach equilibrium deep body temperatures in young and older adults resting in the heat: A descriptive secondary analysis.

It is commonly thought that steady-state thermoregulatory responses are achieved within 30-90 min of compensable heat stress. However, this assumption is based on measurements of whole-body heat exchange during exercise, which stabilize (equilibrate) more rapidly than deep body temperatures, especially under resting conditions. To support the design of ecologically relevant heat exposure studies, we quantified equilibrium times for deep body temperature, as indexed by rectal temperature, in young and older adults resting in the heat. We also evaluated the lag in rectal temperature equilibrium relative to whole-body heat storage (direct calorimetry). Equilibrium times were estimated with data from two laboratory-based trials (NCT04353076 and NCT04348630) in which 83 adults aged 19-80 years (34 female) were exposed to simulated heat wave conditions for 8-9 hours. When assessed on the group level, it took rectal temperature 3.3 [bootstrap 95%CI: 2.9 to 3.9] hours to reach thermal equilibrium (<0.05°C/hour rate of change) in young adults exposed to 40°C, 9% relative humidity (RH). In older adults, who were exposed to a greater range of conditions (31-40°C, 9-45% RH), equilibrium times were longer, ranging from 4.4 [3.8 to 5.3] to 5.2 [4.9 to 5.4] hours. Furthermore, rectal temperature equilibrium was delayed 0.9 [0.5 to 1.4] and 1.8 [0.9 to 2.7] hours compared to whole-body heat storage in young and older adults, respectively (only assessed in 40°C, 9% RH). Individual level equilibrium times ranged from 1-8 hours. These findings highlight the importance of ecologically relevant exposure durations in translational research assessing the physiological impacts of hot weather.

Empirical and model-based evidence for a negligible role of cattle in peste des petits ruminants virus transmission and eradication

Peste des petits ruminants virus (PPRV) is a multi-host pathogen with sheep and goats as main hosts. To investigate the role of cattle in the epidemiology of PPR, we simulated conditions similar to East African zero-grazing husbandry practices in a series of trials with local Zebu cattle (Bos taurus indicus) co-housed with goats (Capra aegagrus hircus). Furthermore, we developed a mathematical model to assess the impact of PPRV-transmission from cattle to goats. Of the 32 cattle intranasally infected with the locally endemic lineage IV strain PPRV/Ethiopia/Habru/2014 none transmitted PPRV to 32 co-housed goats. However, these cattle or cattle co-housed with PPRV-infected goats seroconverted. The results confirm previous studies that cattle currently play a negligible role in PPRV-transmission and small ruminant vaccination is sufficient for eradication. However, the possible emergence of PPRV strains more virulent for cattle may impact eradication. Therefore, continued monitoring of PPRV circulation and evolution is recommended.

Bioactivity and corrosion analysis of thermally sprayed hydroxyapatite based coatings

Metallic biomaterials have been used to repair and replace human body parts because of their excellent biocompatibility, strong corrosion resistance, and high mechanical properties. A ceramic biomaterial that is highly suitable for coating on metallic biomaterials is hydroxyapatite. This is because it is biocompatible with synthetic and natural bone tissue. There has been a growing interest in HAp-based coatings using thermal spray techniques to enhance the crystallinity and adhesion quality and produce a dense coating of metallic biomaterials. Thermally sprayed coating material has been studied and reviewed in detail in the bioactivity analysis and electro-corrosion analysis. Furthermore, the bioactivity of HAp coatings is determined by their ability to promote bone formation and osseointegration and a valuable understanding of the mechanisms and current advancements in bioactivity. Additionally, the corrosion behaviour of thermally sprayed HAp coatings under simulated conditions has been reviewed.

Fabrication, characterization, and dihydromyricetin-loaded bioavailability of Pickering emulsions stabilized by Ampelopsis grossedentata polysaccharide -fish collagen peptide composite nanoparticles

A novel strategy was devised to synthesize robust nanocarriers by conjugating fish collagen peptides (FCP) with Ampelopsis grossedentata polysaccharide (AGP), culminating in the creation of FCP-AGP nanoparticles (FCAGPs) for advanced drug delivery systems. The innovative approach entailed the systematic investigation of particle size, zeta potential, and surface hydrophobicity alterations in FCAGPs upon varying AGP concentrations. The optimized FCAGP-4 nanoparticles, boasting a precisely engineered AGP content of 2.0 % (w/v) and an average particle diameter finely tuned to 353.2 ± 10.5 nm, demonstrated outstanding characteristics in dispersibility, stability, and emulsifying capacity. Furthermore, the water contact angle of FCAGP nanoparticles notably increased from 46.3 ± 2.8° to 70.2 ± 5.6°, indicating enhanced surface hydrophobicity. The mechanism by which FCAGP nanoparticles were attached to the surface of oil droplets to stabilize the emulsions was elucidated by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). Significantly, a modified sample pretreatment technique was employed to demonstrate clearly the emulsion phase interface on the SEM.Innovative FCAGP-stabilized Pickering emulsions achieved 65.39 % in DMY bioavailability, facilitating its slow-release and enhanced bioaccessibility during in vitro digestion. Pickering emulsions loaded DMY demonstrated improved stability and sustained release under simulated digestive conditions, bolstering its therapeutic efficacy. Our findings solidify the theoretical basis for green synthesis of propeptide-polysaccharide nanoparticles and introduce a novel strategy for targeted propeptide Pickering emulsions in drug delivery, highlighting the transformative potential of FCAGP nanoparticles in enhancing lipophilic drug bioavailability and pharmacological impact.

Investigating creep performance of Wel-lok BiSN plug for sealing of offshore wells

In this study, we explore the long-term creep performance of the Wel-lok BiSN plug, a novel bismuth alloy-based sealing technology developed for the efficient abandonment of offshore oil wells. Unlike conventional cement-based solutions, the Wel-lok system leverages a thermite reaction to melt a bismuth alloy in situ, which flows into the wellbore to create a robust, leak-proof seal upon solidification. This process, completed within minutes, offers a rapid and environmentally friendly alternative to traditional methods. We conducted a comprehensive experimental and numerical analysis to assess the plug's durability under simulated downhole conditions, including a 50-year pressure buildup scenario.The primary merit of this method is its ability to provide a quick and reliable seal, significantly reducing the time and environmental impact associated with well abandonment. The thermite reaction and subsequent bismuth alloy flow ensure a high-density seal less prone to leakage than conventional cement-based plugs. Additionally, the Wel-lok system's resilience under long-term pressure buildup, as confirmed by our finite element simulations using ABAQUS, indicates its potential for extended durability.However, the method also has its disadvantages. Relying on a thermite reaction necessitates precise control over the reaction conditions to ensure consistent alloy melting and flow. Any deviation could result in incomplete sealing. Furthermore, while the bismuth alloy offers superior sealing performance, its behaviour under extreme downhole conditions, particularly over extended periods, still requires further empirical validation.Our findings, derived from laboratory thermite reaction modelling and finite element simulations, confirm that the material properties of the Wel-lok system, particularly its creep behaviour, significantly enhance sealing performance. This research validates the Wel-lok system's potential for widespread application in offshore well abandonment and contributes to developing sustainable and reliable well-sealing technologies.

Evaluation on different volume of fluid methods in unstructured solver under the optimized condition

We compared the accuracy of volume of fluid (VOF) methods in unstructured solvers using the following five different methods: 1 - the algebraically compressive VOF method, 2 – simple coupled VOF method with Level Set (S-CLSVOF) method, 3 - interface-compressing VOF method incorporated with Laplacian filter (VOFL), 4 - isoAdvector method, and 5 - isoAdvector method incorporated with Laplacian filter (isoAdvectorL) by incorporating them into OpenFOAM®, an open-source software. To evaluate these methods under proper conditions, we compared the calculation accuracy using the optimized parameters, which are explored by Bayesian optimization. The test cases for advection accuracy of volume fraction and for imbalance of surface tension force in static multiphase fluid fields were considered. In this study, we found that the compression parameters and maximum Courant number should be adjusted to obtain high accuracy simulation according to the simulation condition in VOF and S-CLSVOF method. In VOFL and isoAdvectorL methods, the spurious current can be extremely reduced, which means that these methods are suitable for slow flow with higher Laplace number conditions.

Continuous flow high-pressure homogenization for preserving the nutritional quality and stability of watermelon juice under simulated market storage conditions

This study examined the efficacy of continuous flow high-pressure homogenization (CFHPH) under varying pressures, inlet temperatures, and flow rates, in preserving the nutritional quality and stability of watermelon juice during simulated market conditions and compared it with traditional high-temperature short-time (HTST) processing. The retention of ascorbic acid, carotenoids, and amino acids was analyzed using liquid chromatography, while PPO (polyphenol oxidase) and POD (peroxidase) enzyme activity was assessed using a UV–vis spectrophotometer.We observed a significant decrease (p ≤ 0.05) in ascorbic acid levels after 15 days of storage. For carotenoids, the impact was influenced by the interaction of pressure, flow rate, and inlet temperature within CFHPH, with no clear trend emerging regarding their preservation over 45 days of storage at 4 °C. However, overall retention of carotenoids surpassed that of HTST samples. Both methods enhanced free amino acid contents significantly and decreased PPO and POD activity, with HTST being slightly more effective. Ornithine and histidine concentrations significantly increased, with up to a fourfold rise in samples treated with 300 MPa pressure and up to a tenfold rise for HTST at 95 °C after 45 days of storage. This study suggests optimizing the CFHPH process to enhance the shelf-life and nutritional value of watermelon juice, offering consumers a healthier and longer-lasting choice. Industrial relevanceOur findings highlight CFHPH's higher retention of bioactive compounds, reduction in degradative enzyme activity, and enhancement of the amino acid profile, making it a compelling choice for the fruit juice processing industry. Despite the energy-intensive nature of CFHPH, its ability to preserve vital bioactive compounds like carotenoids and ascorbic acid addresses the growing consumer demand for nutritious and stable juice options. The benefits of CFHPH in maintaining juice quality and nutritional value may outweigh the associated energy costs, making it a promising technology for fruit juice processing.

Design and optimization of a novel porous plate oil–gas separator

In the oil-injection compressor system, it is necessary to separate the lubricating oil by sequentially applying the mechanical separator and the separating filter element, however, the oil–gas separation filter has disadvantages such as short service life, high cost, and great environmental pollution. In this paper, a porous plate separator is proposed to achieve the coalescence of small oil droplets, and then the larger droplets can be removed by mechanical collisions driven by turbulence flow in the separator. This device is designed to be used after the primary separator, in the hope of replacing the separation filter element. The structure of the porous plate oil–gas separator is constructed through the staggered arrangement of two porous plates, and the two-phase flow characteristics in the separator are simulated through the Euler-Lagrangian method with the droplet’s behavior of collision and breakup considered. The hole diameter, hole distance, plate distance, and inlet velocity are the key parameters of the separator, and these parameters are combined through the orthogonal design method to form several different structures and working conditions. The results of range analysis and pressure difference distribution under different layers are analyzed comprehensively, so the best combination is determined in terms of particle size growth rate, oil separation efficiency, and pressure loss. The designed structure is machined, and a test bench is set up, so the performance of the porous plate separator is experimentally tested. It is found that the simulation results are in good agreement with the experimental data, and the best simulated conditions are also verified by the experiment. When the inlet velocity is 0.2 m·s−1, the optimal scheme is suggested as follows: Hole diameter = 1.5 mm; Hole distance = 3 mm; Plate distance = 1 mm; plate layers = 40.

Macrophage-to-osteocyte communication: Impact in a 3D in vitro implant-associated infection model

Macrophages and osteocytes are important regulators of inflammation, osteogenesis and osteoclastogenesis. However, their interactions under adverse conditions, such as biomaterial-associated infection (BAI) are not fully understood. We aimed to elucidate how factors released from macrophages modulate osteocyte responses in an in vitro indirect 3D co-culture model. Human monocyte-derived macrophages were cultured on etched titanium disks and activated with either IL-4 cytokine (anti-inflammatory M2 phenotype) or Staphylococcus aureus secreted virulence factors to simulate BAI (pro-inflammatory M1 phenotype). Primary osteocytes in collagen gels were then stimulated with conditioned media (CM) from these macrophages. The osteocyte response was analyzed by gene expression, protein secretion, and immunostaining. M1 phenotype macrophages were confirmed by IL-1β and TNF-α secretion, and M2 macrophages by ARG-1 and MRC-1.Osteocytes receiving M1 CM revealed bone inhibitory effects, denoted by reduced secretion of bone formation osteocalcin (BGLAP) and increased secretion of the bone inhibitory sclerostin (SOST). These osteocytes also downregulated the pro-mineralization gene PHEX and upregulated the anti-mineralization gene MEPE. Additionally, exhibited pro-osteoclastic potential by upregulating pro-osteoclastic gene RANKL expression. Nonetheless, M1-stimulated osteocytes expressed a higher level of the potent pro-osteogenic factor BMP-2 in parallel with the downregulation of the bone inhibitor genes DKK1 and SOST, suggesting a compensatory feedback mechanisms. Conversely, M2-stimulated osteocytes mainly upregulated anti-osteoclastic gene OPG expression, suggesting an anti-catabolic effect. Altogether, our findings demonstrate a strong communication between M1 macrophages and osteocytes under M1 (BAI)-simulated conditions, suggesting that the BAI adverse effects on osteoblastic and osteoclastic processes in vitro are partly mediated via this communication. Statement of SignificanceBiomaterial-associated infections are major challenges and the underlying mechanisms in the cellular interactions are missing, especially among the major cells from the inflammatory side (macrophages as the key cell in bacterial clearance) and the regenerative side (osteocyte as main regulator of bone). We evaluated the effect of macrophage polarization driven by the stimulation with bacterial virulence factors on the osteocyte function using an indirect co-culture model, hence mimicking the scenario of a biomaterial-associated infection. The results suggest that at least part of the adverse effects of biomaterial associated infection on osteoblastic and osteoclastic processes in vitro are mediated via macrophage-to-osteocyte communication.

Simulation study of the effect of electrode polarity on microscale corona discharge characteristics

Abstract The occurrence and application scenarios of micro-scale corona discharge are diverse, and the effect of micro-scale corona discharge mechanism and needle electrode polarity on corona discharge characteristics is still unclear. This paper establishes a microscale simulation model of pin-plate DC positive and negative corona fluid chemical reactions. The phenomenon of positive and negative corona discharge is being investigated. The internal discharge mechanism is analyzed from the microscopic point of view. Results demonstrate that positive corona discharge generates space charges that reduce the electric field strength between the needle electrode and amplify it between the plate electrodes. In contrast, negative corona discharge exhibits the opposite effect. The number of charged particles produced by microscale negative corona discharge is larger than that produced by positive corona, and the discharge phenomenon is more intense than that of positive corona. Under the simulation conditions in this paper, the ionization reaction rate of micro-scale positive and negative corona rises rapidly at the initial discharge. It will gradually remain stable after experiencing an upward pulse. The pulse peak value generated by micro-scale negative corona discharge is much higher than that of positive corona, and the pulse width of negative corona discharge is about half smaller than that of positive corona, which can reach a stable corona discharge state faster.

A comparison of global and regional ocean tide models with tide gauges in the East Asian marginal seas

To enhance storm surge forecasting and establish open boundary conditions for sophistical numerical simulation of tides and tidal currents in the Bohai Sea, Yellow Sea, and East China Sea, this study evaluated the accuracy of eight global and regional tide models (EOT20, FES2014, NAO.99Jb, TPXO9, DTU16, HAMTIDE12, OSU12, and GOT4.10c) based on 41 tide gauges in the region. The differences between tide models and 8 offshore tide gauges were notable, with the root mean square (RMS) values ranging from 12.67 to 25.97 cm for M2, 6.09–13.73 cm for S2, 2.96–6.56 cm for K1, and 2.50–4.20 cm for O1. For the offshore stations, the NAO.99Jb model demonstrated superior performance with the root square sum (RSS) value of 12.63 cm among the eight tide models. For the island and coastal stations, the EOT20 model performed the best for M2 (RMS 13.03 cm), the FES2014 model for S2 (RMS 6.26 cm), and the DTU16 model for K1 and O1 (RMS 2.73 cm and 2.26 cm, respectively). Overall, the EOT20 model also exhibited the lowest RSS value (15.22 cm) among the eight models for 24 island and coastal stations. The EOT20 model slightly outperformed others with the RSS of 14.88 cm across all 32 tide gauges. Regarding the Sa tidal component, great discrepancies were found between TIDAL CONSTANTS (TICON) harmonic constant data and tide gauges. The reason for this is that the Doodson number for the Sa tidal component derived from tide gauge data, which is influenced by meteorological factors, should be (0,0,1,0,0,0), while the TICON harmonic constant data employed the Doodson number of (0,0,1,0,0,−1) corresponding to the basic astronomical variables. A correction method was proposed to adjust tidal constants from inconsistent Doodson numbers. Comparing with the harmonic constants of the Sa tidal component at 28 coastal tide stations revealed large errors in the NAO.99b, FES2014, and EOT20 models, with RMS values of 19.03, 22.08, and 13.61 cm, respectively. Consequently, caution should be taken when using the Sa results from these ocean tide models.

Platinum nanoparticles decorated TiO2 nanotubes for VOCs and bacteria removal in simulated real condition: Effect of the deposition method on the photocatalytic degradation process efficiency

The incorporation of noble metals onto TiO2 nanostructure is considered as a promoting method to enhance the photocatalytic degradation of pollutant in air treatment process. In this study, highly organized TiO2 nanotubes (NTs) were grown by the anodization method of Titanium substrates. The TiO2-NTs were successfully decorated by platinum (Pt) nanoparticles (NPs) using two different deposition methods: (1) electrodeposition and (2) photodeposition.We explore the impact of different deposition methods on the morphology of Pt nanoparticles (NPs) dispersed onto TiO2 nanotubes and the optical characteristics of Pt-TiO2 nanocomposites, investigating their efficacy in photocatalytic degradation We investigate the effect of varying the deposition method on the morphology of Pt-NPs dispersed onto TiO2 nanotubes and the optical properties of the Pt-TiO2 nanocomposites and their efficient photocatalytic activity degradation against Volatile Organic Compounds (VOCs) and bacteria. Scanning and Transmission Electron Microscopy (SEM and TEM) reveal a nanotubular TiO2 anatase structure adorned with Pt NPs, with the quantity and size of NPs contingent upon the deposition technique employed. The photoluminescence (PL) spectra demonstrate that the Pt/TiO2 heterojunction facilitates the separation of photogenerated charges, thereby diminishing carrier recombination rates. To point out the effect of Pt NPS, both pure TiO2 and Pt/TiO2 heterojunction were tested in the photodegradation of Ethyl Acetate (EA). The Pt/TiO2 heterojunction exhibits superior photocatalytic performance compared to TiO2 in EA degradation, regardless of the Pt deposition method employed. Optimal results are achieved with 120 s of Pt electrodeposition and 3 h of Pt photodeposition under visible irradiation, yielding kinetic constants of approximately 0.245 and 0.195 mg.m−3.s−1, respectively, underscoring the pivotal role of the platinum deposition method in pollutant photodegradation. Respectively simultaneous removal of EA and bacteria (Escherichia coli) was tested using Pt and non-Pt decorated TiO2 NTs. We attributed a total degradation of the bacteria after 180 min using the two efficient photocatalysts Electro 120 s and Photo 3 h compared to 60 % of degradation using pure TiO2 nanotubes.

Effects of microstructure on the corrosion behavior of pearlitic rail steel under simulated salt fog conditions

In this paper, the corrosion resistance and mechanisms of rail specimens with different lamella spacings in a salt spray environment were evaluated and investigated. This investigation was achieved by controlling different cooling rates of pearlitic bodies through heat treatment to obtain various lamella spacings. The results indicated that the corrosion resistance of all the specimens decreased during the salt spray test. The specimens with slow cooling rates (resulting in large pearlitic sheet layer spacings) had poorer corrosion resistance than those with fast cooling rates. Specimens obtained with both fast and slow cooling rates (air cooling at a 0.01°C/s cooling rate) displayed similar corrosion patterns. However, the corrosion stability of the specimen obtained at a cooling rate of 0.03°C/s fluctuated considerably after 144h of salt spray corrosion. This fluctuation was attributed to the transformations of corrosion products within the rust layer. The structural stability of the rust layer was related to the defects present in the material. Large defects increase the instability of the rust layer, thereby increasing the susceptibility to corrosion in a salt spray environment.

Formulation optimization of a probiotic low-calorie chocolate milk and investigating its qualitative properties during storage

Due to concern regarding the consumption of high amount of sugar in diet and role of diet in combating overweigh and related disease, the aim of present study was to optimize a reduced calorie probiotic chocolate milk formula with suitable physicochemical properties. The formula comprising inulin, stevia (Stevia rebaudiana Bertoni), chia (Salvia hispanica L.) seed gum (CSG), and whey protein concentrate (WPC) which optimized using Box-Behnken design (BBD) and then enriched with an encapsulated probiotic strain Lactobacillus acidophilus (DSM1643). The independent variables included inulin (2–8%), CSG (0.1–0.5 %), stevia (50–100 % replacement of sugar), and WPC (1–3%). The dependent variables were selected as viscosity, average particle size, sedimentation percentage, and general acceptance. Optimization done toward achieving the highest viscosity and general acceptance and the lowest sedimentation percentage and average particle size. The optimal conditions were found to be 7.99 % inulin, 70 % stevia, 0.34 % CSG, and 1 % WPC. Under these conditions, the viscosity, sedimentation percentage, average particle size, and general acceptance of the product were equal to 40.69 mPa s, 2.2 %, 434.221 nm, and 5.1, respectively. Next, the chocolate milk was enriched with at 109 CFU/g probiotic bacteria and evaluated. The probiotic strain was resistant to simulated gastrointestinal conditions and under this condition the free bacterial cells count declined by 8 logCFU/g while the encapsulated cells decreased approximate 3 logCFU/g. The bacteria count did not undergo a significant change until the 5th day of storage. The results showed that the inulin, stevia, CSG, and WPC at optimal concentrations and encapsulated probiotic bacteria could be simultaneously applied to produce a product with good properties. This formula could be considered as a new product with health improving properties, low calorie which is suitable for people suffering from diabetes and obesity.

Gas-Phase Kinetics of a Series of cis-3-Hexenyl Esters with OH Radicals under Simulated Atmospheric Conditions.

The present relative kinetic study reports on the experimentally determined gas-phase reaction rate coefficients of OH radicals with a series of seven cis-3-hexenyl esters. The experiments were carried out in the environmental simulation chamber made of quartz from the "Alexandru Ioan Cuza" University of Iasi (ESC-Q-UAIC), Romania, at a temperature of (298 ± 2) K and a total air pressure of (1000 ± 10) mbar. In situ long-path Fourier transform infrared (FTIR) spectroscopy was used to monitor cis-3-hexenyl formate (Z3HF, (Z)-CH3CH2CH═CH(CH2)2OC(O)H), cis-3-hexenyl acetate (Z3HAc, (Z)-CH3CH2CH═CH(CH2)2OC(O)CH3), cis-3-hexenyl isobutyrate (Z3HiB, (Z)-CH3CH2CH═CH(CH2)2OC(O)CH(CH3)2), cis-3-hexenyl 3-methylbutanoate (Z3H3MeB, (Z)-CH3CH2CH═CH(CH2)2OC(O)CH2CH(CH3)2), cis-3-hexenyl hexanoate (Z3HH, (Z)-CH3CH2CH═CH(CH2)2OC(O)(CH2)4CH3), cis-3-hexenyl cis-3-hexenoate (Z3HZ3H, (Z,Z)-CH3CH2CH═CH(CH2)2OC(O)CH2CH═CHCH2CH3), cis-3-hexenyl benzoate (Z3HBz, (Z)-CH3CH2CH═CH(CH2)2OC(O)C6H5), and the reference compounds. The following reaction rate coefficients (in 10-11 cm3 molecule-1 s-1) were obtained for the OH radical-initiated gas-phase oxidation of cis-3-hexenyl esters: (4.13 ± 0.45) for Z3HF, (4.19 ± 0.38) for Z3HAc, (4.84 ± 0.39) for Z3HiB, (5.39 ± 0.61) for Z3H3MeB, (7.00 ± 0.56) for Z3HH, (10.58 ± 1.40) for Z3HZ3H, and (3.41 ± 0.28) for Z3HBz. The results are discussed in terms of hexenyl ester reactivity and compared with the available literature data and structure-activity relationship (SAR) estimates. The atmospheric implications based on the average lifetimes of the investigated cis-3-hexenyl esters are discussed in the present study. The gas-phase rate coefficients for OH radical reactions are given herein for the first time for cis-3-hexenyl isobutyrate, cis-3-hexenyl 3-methylbutanoate, cis-3-hexenyl hexanoate cis-3-hexenyl cis-3-hexenoate, and cis-3-hexenyl benzoate. The newly determined gas-phase reaction rate coefficients provide new information for existing kinetic databases and contribute to the further development of SAR methodologies useful for predicting the reactivity of oxygenated volatile organic compounds.

Controller design and remote piloting training module development for unmanned cropped delta reflex wing configuration

In this study, a cost-effective high-fidelity six-degree of freedom module augmented with an onboard controller is developed. The unmanned aerial vehicle (UAV) under consideration is a wing-alone configuration with a cropped delta planform and reflex airfoil cross-section designed to perform manoeuvres at high angles of attack. The six-degree of freedom dynamics for the aforementioned configuration is developed based on Newtonian mechanics incorporating linear and nonlinear aerodynamic models to expand flight simulations in corresponding regimes. Aerodynamic stability and control parameters for the simulations are obtained from full-scale wind tunnel measurements and flight tests. It is observed that the linear aerodynamic model is valid in angle of attack (α) domain −5°≤α≤10°, followed by nonlinearity up to α≈21°, post which lift coefficient remains almost constant with angle of attack till 45°. The simulation model is validated with the corresponding flight data obtained from flight tests. A user-friendly graphical interface with real-time animation of UAV has been developed for the aforementioned configuration by integrating MATLAB and Flightgear environment with real-time control input from the hardware to enable the pilot for visual and tactile feedback, respectively. A controller based on total energy control is designed for velocity and altitude hold modes, while an attitude hold controller is designed for pitch and roll angle tracking to enable controller-in-the-loop remote piloting simulations. In order to enhance practical applicability, the designed module has been tested under various simulated wind conditions. It is noticed from the results that the steady-state error in attitude remains below 2% with a maximum overshoot of 5° from reference. The total energy controller achieves a zero steady-state error with a maximum overshoot of 2 m/s for velocity and 6 m for altitude, respectively. The developed module enhances remote piloting training, flight response assessment, and control algorithm testing for cropped delta planform UAVs.

A Less-Invasive Left Atrial Assist Device Concept for Diastolic Heart Failure: First In Vitro and In Vivo Assessment

ObjectiveA less invasive Left Atrial Assist Device (LAADx) is a novel and implantable, extracardiac blood pump concept, intended for the treatment of diastolic heart failure (DHF), represented by heart failure with preserved ejection fraction (HFpEF). MethodsA mixed-flow pump was used as the working LAADx model. Its performance was evaluated at three speeds, using an in vitro pulsatile mock circulatory loop, with a pneumatic pump that can simulate DHF conditions by adjusting the diastolic drive pressure. The LAADx model was implanted in four healthy calves. The pump’s inflow and outflow cannulas were inserted into the left atrium (LA) and left ventricle (LV), respectively, without cardiopulmonary bypass. The LAADx was operated at three speeds, and DHF-like conditions were induced by inflating a balloon, inserted into the LV. ResultsWith the in vitro study, DHF-like conditions were successfully induced, exhibiting decreased cardiac output and aortic pressure, as well as increased mean LA pressure, both mitigated with the LAADx support. With regards to the in vivo study, simulated DHF conditions showed a decrease in aortic pressure, and an increase in LA pressure and LV end-diastolic pressure, which were again mitigated by the LAADx. Echocardiography showed good positioning of the outflow cannula; and, neither cardiac dysfunction, nor mitral interference was observed. ConclusionsInitial in vitro and in vivo results confirmed that the LAADx model, a device concept driven by creating an extracardiac route from the LA to LV, has the potential to mitigate high LA pressure and improve LV filling of HFpEF pathology.

Dual-function starch aerogels: Nutraceutical carriers for iron and folic acid delivery

Iron and folic acid are especially important in pregnancy, where supplementation is often the only path to prevent anemia. Despite the available commercial solutions, the challenges of enhancing nutrient absorption and reducing side effects foster the search for novel approaches. In this work, freeze-dried starch aerogels were developed to act as nutraceutical carriers for co-delivery and tested under simulated digestion conditions. Iron and folic acid were loaded into starch gels, both separately and mixed. Iron presented a faster release than folic acid in intestinal conditions, reaching 75–80 % after 10 and 90 min, respectively. Molecular modeling suggests that folic acid interacts with amylose agglomerates in water by hydrogen bonds, probably delaying its release. Co-delivery of these nutraceuticals seems to not affect the release behavior. The Korsmeyer-Peppas kinetic model fits well to all release profiles. The proposed starch aerogel is a promising solution and further development can increase its competitiveness against conventional supplements.