This work evaluates the resistance to chemical attack and thermal shock of porcelain formulated from local raw materials from Burkina Faso for their validation in real use. A kaolinitic clay, a pegmatite and sand were used for the formulation of porcelain tiles. Some samples were shaped by casting into porous molds and sintered at a temperature of 1240 °C. The average heating rate is 10 °C/min up to the final given temperature. These porcelains were immersed to a depth of 25 mm in test solutions and kept closed at 20 °C for 12 days. Six concentrations of test solutions were prepared to perform these tests: ammonium chloride (100 g/L); hydrochloric acid (3% and 18% by volume); lactic acid (5% by volume); citric acid (100 g/L) and alkali KOH (30 g/L and 100 g/L). The test showed that these porcelains are resistant to chemical attacks with insignificant mass variations ranging from −0.030 to 0.053 wt%. The results of the thermal shock test show that formulated porcelains are resistant to the brutal variation of temperature. The results obtained qualify the porcelains for industrial and real use.