Chromium Content Research Articles

Evaluation of Cadmium, Lead, Chromium, and Nickel Content in Various Types of Nuts: Almonds, Cashews, Hazelnuts, Peanuts, and Walnuts - Health Risk of Polish Consumers.

World production and consumption of nuts continue to rise year on year. Nuts, due to their high nutrient content, are becoming increasingly popular among consumers. A potential health risk may result from the consumption of nuts contaminated with metallic trace elements like cadmium or lead. In this research, we measured the content of Cd, Pb, Cr, and Ni in various edible nuts. All elements were detected using the electrothermal atomic absorption spectrometry analytical technique (ETAAS). The study material comprised 69 nut samples including almonds, cashews, hazelnuts, peanuts, and walnuts available on the Polish market. Indicators such as the hazard quotient (HQ) and hazard index (HI) were used to assess the health risk of consumers. The concentrations of elements in all analyzed samples of nuts were as follows: Cd: peanuts > almonds > hazelnuts > walnuts > cashews, Pb: peanuts > almonds > hazelnuts > walnuts > cashews, Ni: cashews > peanuts > walnuts > hazelnuts > almonds, Cr: almonds > cashews & hazelnuts > peanuts > walnuts. Health risk indicators estimated for consumers whose diet is rich in nuts, in which metallic trace elements were recorded, indicate that an unacceptable impact may occur, and the risk of negative health effects (non-cancer) will be moderate to high.

Optimizing extraction of collagen from hazardous leather shaving dusts by crude protease enzyme: Chrome recovery and reuse for leather rechroming

This study explores an eco-friendly method to achieve 99.98 % dechroming (reducing Cr from 7700 to 4.71 ppm) of Chrome-tanned leather shaving dust (CSD), through enzymatic hydrolysis using crude protease. The enzyme exhibited strong activity (>40 U mL−1) across a temperature range of 50 °C to 65 °C and a pH range of 5 to 11. The pH of the mixture containing CSD, water, MgO, and enzyme was maintained at 8.9 during hydrolysis. The temperature, hydrolysis time, and enzyme concentration were optimized using response surface methodology (RSM). Under optimal conditions of 17.57 % enzyme concentration, 62.01 °C, and a hydrolysis time of 7 h, the predicted collagen yield was 31.66 %. Laboratory experiments conducted with these predicted parameters resulted in a collagen recovery of 30.9 %, achieving an accuracy of 97.6 % compared to the predictions. In contrast, hydrolysis with MgO alone achieved only 87.01 % dechroming with about 2 % collagen yield, highlighting the enzyme's superior effectiveness. The enzymatic cleavage of peptide bonds in the leather matrix enhanced collagen solubilization. Characterization techniques, including FT-IR, NMR, XRD, DSC, and TGA, confirmed successful extraction and purity, with the collagen being rich in glycine and proline. Cytotoxicity results demonstrated its non-toxic nature, indicating potential applications in biomedical fields, tissue engineering, food, pharmaceuticals, and cosmetics. The recovered chromium sulfate was reused for rechroming goat wet blue leather, with chrome content in crust leather treated with recovered basic chromium sulfate (rBCS) and fresh basic chromium sulfate (BCS) being 3.23 % and 3.35 %, respectively, both meeting industry standards for goat crust leather. SynopsisAn eco-friendly method for dechroming chrome-tanned leather shaving dust (CSD) and extracting collagen was established. The process achieved 99.98 % dechroming and 30.9 % collagen yield using crude protease enzyme. Characterization confirmed the collagen's purity, and recovered chromium sulfate was reused for rechroming goat leather, meeting industry standards.

Performance evaluation on the chemical looping combustion of the chromium-containing leather waste and the fate of chromium using thermodynamic analysis

Leather waste (LW) consistently contains a high content of chromium (Cr), which significantly limits its utilization due to the toxicity of hexavalent chromium formed through oxidation. To prevent this oxidation, chemical looping combustion (CLC) is employed to dispose of the chromium-rich LW. First, the gaseous and solid pollutants generated during air combustion and CLC are compared when LW is used as fuel. The results indicate that CLC is an effective way to significantly decrease the oxidation of chromium (Cr(VI)/Crtotal) at typical operating temperatures. Subsequently, various operating parameters, namely the equivalence ratio of oxygen carrier to leather waste (αOC/LW), the equivalence ratio of steam to leather waste (αS/LW), and air reactor (AR) temperature, are changed to investigate their effects on the CLC combustion and pollutant behaviors. The findings reveal that no chromium is oxidized in the fuel reactor. The oxidation in AR is associated with the presence of Na in the AR, which can react with chromium to form Na2CrO4. Increasing αOC/LW from 0.8 to 1.2 reduces the oxidation of chromium in the AR from 11.68% to 1.76%, while increasing αS/LW from 0.2 to 1.6 has the opposite effect, improving the oxidation of chromium in the AR from 3.16% to 5.18%.

Investigation and estimation of structural and dielectric properties of chromium-doped cobalt ferrites nano particles

Abstract Nano ferrite materials are of critical importance in meeting the global demand for microwave and electronic devices, as spinel ferrites possess remarkable morphological, structural, and dielectric characteristics. This study investigates chromium-doped ferrite nanoparticles with the chemical composition CoCrxFe2-xO4 (x = 0.00, 0.30, 0.60, and 0.90), synthesize using the sol–gel technique and subjected to annealing at 900 °C. Energy Dispersive x-ray Analysis EDAX patterns confirmed compositional stoichiometry. X- Ray Diffraction analysis reveals that all samples exhibit a cubic crystal structure. Replacing some of the ions with chromium (Cr3+) led to a decrease in the x-ray density form (5.329–5.324). The average crystallite size in the fabricated samples ranged from 46.07 to 31.84 nm, and the lattice parameters decrease from 8.382 to 8.364 Å as the chromium content increase. Infrared spectra show that lower frequency band (ν2) at around 479.69-392 .60 cm–1 and a higher frequency band (ν1) within a range from 611.05–57661 cm–1 a clear indication of spinel structure characteristics. The examination using FE-SEM indicates that the produced materials exhibit porosity and amorphous characteristics. The significant tangent loss observe at lower frequencies suggests that these materials may have potential applications in medium-frequency devices. Consequently, spinel nanoferrites can offer advantages for advanced electronic and microwave technologies.

Immobilized chitosan as an efficient adsorbent for columnar adsorption of Cr (VI) from aqueous solution

The current effort focuses on creating an effective adsorbent for Cr (VI) adsorption due to the growing need to address Cr (VI) pollution in aqueous solutions. Chitosan, a biopolymer and polysaccharide with several functional sites, is immobilized on alginate using the ion exchange technique. Both prior to and following Cr (VI) adsorption, the material's shape, crystallinity, and functional groups are reported. Immobilized chitosan was employed to adsorb Cr (VI) in a fixed bed column with variable operational parameters (flow rate, initial chromium content, and bed height). The analysis of breakthrough curves showed that at a flow rate of 10 mL/min, Cr (VI) concentration of 50 mg/L and a bed height of 18 cm, a maximum adsorption of 78.41 % was achieved. The adsorption system and the breakthrough curves were thoroughly understood by using Thomas, Yoon-Nelson and Adams-Bohart kinetic models. There is promise for the large-scale use of synthesized immobilized chitosan because the current adsorption process fits the Thomas and Yoon-Nelson model well and confirms the homogenous bed, low mass transfer resistance, and constant operating conditions throughout the experiment. Furthermore, an exploration of the adsorption mechanism is undertaken and the outcomes are compared with existing literature. The regeneration and reuse tests up to four cycles provided insight into the immobilized chitosan's stability, dependability, and potential for scaling up.

Monitoring and Assessment of Toxicological Risks of Poultry Meat Contaminated with Heavy Metals.

This study aimed to investigate the heavy metal contamination in poultry meat of Kotli Sattian, Rawalpindi. The meat samples from ten sites were analyzed for lead, cadmium, chromium, copper, arsenic, nickel, zinc, iron, sodium, and calcium. The possible health risks of these metals were also observed. Mean lead, cadmium, chromium, arsenic, and nickel concentrations were higher than the permissible limits of the World Health Organization (WHO). Metals in meat samples showed the trend of Fe > Na > Zn > Ni > Ca > As > Cr > Pb > Cu > Cd. All the studied metals except lead were statistically significant (P ≤ 0.05). The hazard quotient (HQ) values of all the metals were below one, except iron. Iron showed chronic health risks in both adults (1.63) and children (3.64). Moreover, the cumulative hazard index (HI) of the metals indicated that meat consumption can pose a significant chronic toxic risk in both adults and children as the HI value was 2.06 for adults and 4.61 for children, which is greater than one. The carcinogenic risk (CR) of arsenic in meat for adults and children exceeded the acceptable range, making it a metal of concern. This means that the consumption of small concentrations of metal through meat may be the source of severe toxicological consequences. It can be concluded that meat is contaminated with metals; therefore, appropriate precautions should be taken to minimize this contamination.

Multi-metal resistance and antibiotic susceptibility of biofilm forming bacteria isolated from Kuzhikandam Creek in Kochi, southwest part of India

The purpose of this work was to characterize and identify the bacteria isolated from highly polluted locations that could potentially be able to withstand extremely toxic heavy metals. The study area selected for bacterial isolation from sediment samples was Kuzhikandam Creek, a tributary of the Periyar River and one of the world’s most hazardous hotspots, located in Kochi’s Eloor industrial region. Heavy metal analysis of chromium, copper, and lead in sediment samples was performed, and the results showed that the concentrations were greater than permissible limits. Several metal-resistant bacteria were isolated from sediments, which, upon further screening in solid media at different concentrations of chromium, copper, and lead, found three highly resistant species (S1B1, S2B2, and S3B3), one from each site. The phenotypic and biochemical characterization of these bacteria was examined using standard procedures. The ability of these species to generate biofilm was examined using methods like the crystal violet assay (qualitative assessment) and also using the scanning electron microscope. The antibiotic susceptibility of these species was tested with six different antibiotics, which are used in various disease treatments. These isolates, sequenced using the 16S rRNA Sanger dideoxy method, have been identified as Staphylococcus arlettae, Bacillus paramycoides, and Cellulosimicrobium funkei.

Adsorption Performance for Chromium(VI) of a UiO-66-Ce Metal–Organic Framework Built by DL-Aspartic Acid

Metal–organic frameworks (MOFs) have recently received a lot of interest for their use in adsorbing and eliminating hexavalent chromium from water. Obtaining low-cost, biocompatible, and environmentally friendly MOFs for research in this field is vital. One very stable three-dimensional UiO-66-Ce(IV) MOF, Ce-asp, was synthesized with a high yield using an amino acid ligand, DL-aspartic acid. As a result, the adsorption characteristics of the MOF against hexavalent chromium ions in aqueous solution were examined. The effects of time, solution pH, MOF dose, and beginning chromium(VI) content in aqueous solution were investigated on adsorption. More crucially, the adsorption mechanism of this MOF for chromium(VI) was proposed, setting the groundwork for its future use in chromium(VI) removal in real-world waters.

Orthodontic Alloy Wires and Their Hypoallergenic Alternatives: Metal Ions Release in pH 6.6 and pH 5.5 Artificial Saliva

Legislative framework addresses the issues of alloy corrosion, demanding the restricted use of probable carcinogenic, mutagenic, and toxic-for-human-reproduction (CMG) metals like nickel, cobalt, and chromium and demanding the development of new biomaterials. The aim of this research was to evaluate and compare the ion release of standard dental alloys and their hypoallergenic equivalents. Six types of orthodontic alloy wires (nickel–titanium (NiTi), coated NiTi, stainless steel (SS), Ni-free SS, and cobalt–chromium (CoCr) and titanium–molybdenum (TMA) were immersed into artificial saliva of pH 5.5 and 6.6. Release of metal ions was measured by inductively coupled plasma–mass spectrometry after 3, 7, 14 and 28 days. The data were analyzed using analysis of variance, and results with p < 0.05 were considered significant. NiTi released more Ti and Ni ions compared to the coated NiTi; SS released more iron, chromium, and nickel compared to the nickel-free SS. CoCr released cobalt in a high concentration and low amounts of chromium, nickel, and molybdenum compared to the molybdenum and titanium released by TMA. Release of metals from dental orthodontic alloys in vitro was overall lower at pH 6.6 and for the hypoallergenic equivalents when compared to standard dental alloys.

Multivariate Analysis of Water Quality in the Seybouse River: Implications for Pollution Management

ABSTRACTHeavy metal contamination in water bodies is a pervasive and persistent environmental challenge in many parts of the world, especially in developing countries. This study investigates the use of multivariate analysis methods for monitoring variations in water quality along a spatial gradient and for the interpretation of pollution levels at different sampling sites. We assessed the water quality of the Seybouse River and identified possible sources of pollution using three complementary multivariate analysis techniques (PCA, NMDS, and K‐means clustering). The results indicate a longitudinal gradient in water quality associated with industrial and agricultural activities in the middle and lower Seybouse River. Physico‐chemical and heavy metal analyses show high water turbidity with elevated concentrations of iron and chromium. We show that the contamination stems from four different sources, which can be categorized into different pollution levels. Our results suggest that complementary multivariate methods are a robust approach to identifying and categorizing significant sources of pollution in rivers, enabling the development of future successful water quality management strategies based on water pollution levels. This study highlights the importance of monitoring water quality and taking effective measures to control and mitigate pollution from various sources to ensure the safety of the environment and human health.

Impact of Metal-Containing Industrial Effluents on Leafy Vegetables and Associated Human Health Risk

One of the primary sources of trace elements in the environment is wastewater used for irrigation. However, the effects of untreated wastewater containing high concentrations of chromium and zinc on vegetables and the potential human health risks associated with their consumption are poorly understood. This pot experiment aimed to address this research gap. The accumulation of chromium and zinc and their effect on the biochemical parameters of lettuce (Lactuca sativa) and green onion (Allium fistulosum L.) irrigated with untreated industrial effluents were assessed. The average concentrations of chromium and zinc in the edible parts of the vegetables ranged between 7.36 and 7.58 mg/kg dry weight and 59.8 and 833 mg/kg dry weight, respectively. The irrigation of the lettuce with the effluent containing zinc at a concentration of 2.95 mg/L led to a significant increase in the content of phenols and the antioxidant activity. A significant reduction in the chlorophyll content of the lettuce leaves and the antioxidant activity of the onion leaves was observed when the plants were irrigated with the effluent containing zinc at a concentration of 78 mg/L. No non-carcinogenic health risk from the intake of chromium and zinc was identified through the consumption of lettuce and green onion, primarily due to the fact that a smaller proportion of the total metal content was transferred to their edible parts.

Assessment of Heavy Metals in Tea Plantation Soil and Their Uptake by Tieguanyin Tea Leaves and Potential Health Risk Assessment in Anxi County in Southeast China

Evaluating heavy metal pollution in tea plantation soil and conducting potential health risk assessments are crucial for ensuring the safety of tea consumers. However, soil heavy metal pollution levels and dietary exposure risk remain poorly understood, and there is no consensus on how soil physicochemical properties affect heavy metal concentrations. In this study, seventy-three soil samples and corresponding tea leaves from main tea-producing regions in Anxi County were analyzed for arsenic (As), chromium (Cr), lead (Pb) and copper (Cu) concentrations. The results showed that mean concentrations of As, Cr, Cu and Pb in the soil did not exceed respective risk screening values in China (GB 15618-2018). The concentrations of As, Cr, Cu and Pb in the tea leaves were within limiting values of the Chinese National Food Safety Standard, and the bioaccumulation factor of heavy metals in descending order was Cu > Pb > As > Cr. The hazard index values of heavy metals indicated no potential human health risk. Soil pH, EAl, EA and AP were the main controlling factors for heavy metal in soil and tea leaves. Cu and Pb concentrations in tea leaves were positively correlated with soil Cu and Pb concentrations. These results provide a scientific basis for effective monitoring and management in tea plantations and for controlling potential risks in tea leaves.

Influence of composition and temperature on oxide film formation for Fe-Cr-Ni alloys in simulated PWR primary water

ABSTRACT The growth of oxide films on Fe-Cr-Ni alloys in simulated pressurized water reactor (PWR) primary system environments was investigated, with focus on the influence of alloy composition and temperature. Oxide film thicknesses were measured for 90 specimens prepared from compact tension (CT) test pieces. Cross-sectional observations were also conducted on coupon specimens using scanning transmission electron microscopy (STEM). The behavior of Ni-based alloys, specifically Alloy 600, and Fe-based alloys, specifically Type 316 stainless steel, were compared. Ni-based alloys exhibit superior corrosion resistance due to slower Fe diffusion kinetics compared to Fe-based alloys, leading to the formation of a nickel-enriched protective layer at the metal-oxide interface. The oxidation rates of Ni-based alloys follow an Arrhenius-type temperature dependence. In contrast, Fe-based alloys show a more complex temperature-dependent behavior, with reduced oxidation rates at higher temperatures that are likely due to changes in oxide dissolution. Higher chromium concentrations in both alloy types improve the protectiveness of the oxide film towards corrosion by forming a more compact inner oxide layer. The study identifies three primary factors influencing oxide film growth: reactions at the metal-oxide interface, diffusion within the oxide layer, and processes at the oxide-solution interface. The relative significance of these processes varies depending on the alloy composition and temperature.

Monitoring of urinary nickel and chromium in metal industries workers in Alborz, Iran

Heavy metal contamination from occupational sources is a cause for concern due to its potential accumulation in the environment and the body of living organisms, which leads to long-term toxic effects. There is limited evidence on the concentration of heavy metals in the body fluids of welding workers. This study aimed to measure the concentration of nickel (Ni) and chromium (Cr) as two main toxic heavy metals in the urine samples of welders and determine the potential relationship of various environmental factors on their concentration levels. This study was conducted in Iran in 2022–2023. Eighty-five urine samples were collected from the studied welding workers. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used to measure the concentration of Ni and Cr. Data related to socio-demographic characteristics (education level, income, work experience, age, and body mass index (BMI)), lifestyle profile (consumption of seafood and canned food, smoking, physical activity), type of ventilation and preventive devices at work, and suffering from underlying diseases (cardiovascular and high blood pressure) were collected using valid questionnaires. Ni and Cr were present in 100% of urine samples with mean concentrations of (1.09 ± 0.294) and (11.45 ± 16.751) µg/g creatinine, respectively. A significant correlation was observed between the mean concentration of Ni and Cr with the level of education, income, work experience, age, consumption of seafood and canned food, smoking, type of ventilation and preventive devices, and underlying diseases (p-value < 0.05). Also, there was no significant difference between Ni concentration and physical activity and Cr concentration with BMI. Lifestyle determinants and not using preventive devices are important predictors of urinary heavy metals in welding workers. Therefore, more research is required to determine the adverse effects of long-term exposure to these heavy metals.

Association between the levels of toxic heavy metals and schizophrenia in the population of Guangxi, China: A case-control study

The relationship between body levels of heavy metals and the risk of schizophrenia remains unclear. This study investigates the relationship between plasma levels of toxic heavy metals and the risk of schizophrenia among adults in Guangxi, China. Plasma concentrations of lead (Pb), cadmium (Cd), arsenic (As), and chromium (Cr) were measured using inductively coupled plasma mass spectrometry (ICP-MS). To evaluate both the single and combined effects of metal exposure on the risk of schizophrenia, we employed multivariate logistic regression, Bayesian Kernel Machine Regression (BKMR), and generalized Weighted Quantile Sum (gWQS) models. Additionally, we employed the Comparative Toxicogenomics Database (CTD) to analyze the mechanistic pathways through which metal mixtures may induce schizophrenia. Relative mRNA expression levels were measured using Real-Time Quantitative Reverse Transcription Polymerase Chain Reaction (RT-qPCR). Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses were conducted to predict potential biological functions. In logistic regression models, compared to the lowest exposure group (Q1), the odds ratios (ORs) for Pb in groups Q2, Q3, and Q4 were 2.18 (95% CI: 1.20–3.94), 4.74 (95% CI: 2.52–8.95), and 3.62 (95% CI: 1.80–7.28), respectively. Both BKMR and gWQS models indicated a positive correlation between the combined effects of toxic heavy metal mixtures and the risk of schizophrenia, with Pb demonstrating the most substantial impact, particularly in older adults and females. Elevated levels of tumor necrosis factor (TNF) and interleukin-1 beta (IL-1β) were observed in patients with schizophrenia, while the expression of tumor protein p53 (TP53) was significantly reduced. These findings underscore the critical need to avoid exposure to toxic heavy metals to prevent schizophrenia, highlighting significant public health implications.

Performance of poplars and willow grown on soil under wastewater irrigation during the first 2 years of establishment.

Recycling wastewaters as irrigation and fertilization of tree species is a market-driven action for purpose-grown timber plantations that promotes the circular economy. A greenhouse experiment was carried out to investigate the performance of poplar clones (Populus alba L. "20/45", P. nigra L. "62/154", and P. euramericana (Dode) Guinier "92/40") and willow (Salix excelsa S.G. Gmel) grown on soils under tap water irrigation (TWI) or wastewater irrigation (WWI) during the first 2 years of establishment. Results showed that at 2 years after planting, poplars and willow exhibited significantly greater performance when grown in WWI versus TWI (P < 0.05). Likewise, phytoremediation of nutrients along with some heavy metals increased in plant organs of WWI-grown plants relative to their TWI counterparts (P < 0.05). After 2 years of growth and under both conditions (TWI and WWI), P. nigra plants showed the greatest growth and biomass; however, leaf area was the largest for P. alba and P. euramericana plants. Also, P. nigra plants had the highest total contents of copper (Cu) and manganese (Mn), P. alba had the most zinc (Zn), and differences for iron (Fe) were negligible across species. In contrast, total contents of nickel (Ni) and chromium (Cr) were higher for S. excelsa, P. nigra, and P. alba plants, while the lowest values were measured in P. euramericana plants. Across all species and soil treatments, the translocation factor (TF) was greater than 1 for Mn, Cu, and Zn, indicating phytoextraction and phytoaccumulation of these elements into leaves and stems, while TF was less than 1 for Fe, lead (Pb), Ni, and Cr, resulting in phytoremediation of these elements as phytostabilization. Differences in tolerance index (TI) values were negligible across species, and TI was greater than 100% after 2 years of growth, indicating that all four species are suitable for phytoremediation applications with urban wastewaters having similar heavy metal concentrations as in the present study. Nevertheless, given the combination of enhanced growth, biomass, and heavy metal accumulation (Mn, Cu, Cr, and Ni), P. nigra plants exhibited the greatest phytoremediation potential of four tested species.

Accumulation of heavy metals (Cr, Cu, As, Cd, Pb, Zn, Fe, Ni, Co) in the water, soil, and plants collected from Edayar Region, Ernakulam, Kerala, India

The accumulation of heavy metals in the environment is a significant concern due to their potential toxicity and persistence. This study investigates the levels of heavy metal contamination in the water, soil, and plants of the Edayar region in Ernakulam, Kerala, India. The region has experienced industrialization and urbanization, leading to concerns about heavy metal pollution. The study aims to assess the concentrations of chromium (Cr), copper (Cu), arsenic (As), cadmium (Cd), lead (Pb), zinc (Zn), iron (Fe), nickel (Ni), and cobalt (Co) in water, soil, aquatic and terrestrial plants. Samples were collected from various locations within the Edayar region, and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was conducted to quantify heavy metal concentrations. The findings of this study will contribute to the assessment of heavy metal pollution in the Edayar region. Plants with a high diversity index were taken for analysis from both aquatic and terrestrial habitats. Scoparia dulcis L. seems to specialize in metal accumulation, possibly for protective purposes. Synedrella nodiflora Gaertn demonstrates adaptability to metal-rich environments through robust metal uptake and tolerance mechanisms. Alternanthera philoxeroides (Mart.) Griseb, on the other hand, appears to have developed mechanisms to manage heavy metal exposure. The results indicate significant levels of heavy metal contamination across all samples, with the highest concentrations detected in soil, followed by water and plants. Chromium and lead levels in soil exceeded the permissible limits set by international standards, posing potential risks to human health and the ecosystem. The accumulation patterns in plants varied, with higher bioaccumulation factors observed for zinc and copper, suggesting their preferential uptake. This study highlights the urgent need for remediation strategies and continuous monitoring to mitigate the impact of heavy metal pollution in the Edayar region. The results will help in understanding the environmental impact of human activities.

Different characteristics of the soil in marmot habitats might be one of the factors that influcting Yersinia pestis prevalent in which than pikas.

Marmots are recognized as host animals for plague caused by Yersinia pestis infection. It is unclear that why plague prevalent in marmot rather than other rodents like pikas in the same habitats. This study aims to analyze the differences of the soil characteristics around marmots and pikas burrows to explore the soils factors impacting on different epidemic intensities of Yersinia pestis in these two rodents. Soil samples were collected from within and around marmot and pika burrows, as well as from the nearby areas not inhabited by them and Chinese baseline soil properties as control groups, in the Qilian Mountains of Gansu Province, China. The physicochemical properties and the bacterial 16S rRNA were measured to analyze the characteristics of soils from different groups. Subsequently, the data were analyzed using R studio. The analysis revealed that marmot habitats exhibited distinct soil characteristics, including lower organic matter and alkaline hydrolyzed nitrogen, but higher electrical conductivity and total soluble salts. And soil in marmot areas tended to have higher concentrations of nickel, chromium, and iron, also lower levels of zinc and selenium. Additionally, the alpha diversity of soil microorganisms in marmot habitats was significantly low. Simultaneously, redundancy analysis was conducted, which showed that the low alpha diversity of marmot-soil was influenced by its physicochemical properties. The alpha diversity of the soil was positively correlated with EC, TSS, Na, and Cr, etc., while it was negatively correlated with AHN, OM, Se, Zn, and Fe, etc. These characteristics in marmot habitats, including low levels of organic matter, alkaline hydrolyzed nitrogen, zinc, selenium, and bacterial alpha diversity, as well as high levels of electrical conductivity, total soluble salts, iron, and nickel, played a crucial role in the spread of plague. It was discovered that the unique characteristics of marmot-soils provided essential elements necessary for the survival of Yersinia pestis, including high levels of Fe and Ca, or facilitated the spread of plague. Thus, the transmission of the plague was facilitated.

Synthesis of double carbide (Ti,Cr)C with a different Cr content produced by electro thermal explosion

In this paper we report the preparation of double carbide (Ti,Cr)C with a chromium content of 10 ÷ 30 at% by electrothermal explosive synthesis (ETE). This method allows synthesis to be carried out at high temperature with minimal holding time. The ETE method is favourable for the formation of dense carbide ceramics. The synthesized samples were characterized by X-ray diffraction and scanning electron microscopy. It was found experimentally that the unit cell parameter of the double carbide decreases linearly with increasing chromium content. The DFT calculations also confirmed the dependence of the unit cell parameter (Ti,Cr)C on the chromium content according to Vegard's law and show changes in the cell shape and distance between Cr–Cr layers with increasing chromium content. The pDOS diagram shows that an increase in chromium content leads to an excess of d∗ electrons on the π∗ orbitals, which has a destabilizing effect on the double carbide structure.Crystal Orbital Hamiltonian (COHP) analysis of the electronic structure of the double carbide, partitioning the energy of the band structure into bonding, non-bonding and anti-bonding energy regions, showed the influence of chromium content on its stability.

Arsenic, cadmium, and chromium concentrations in contrasting phosphate fertilizers and their bioaccumulation by crops: Towards a green label?

Potentially toxic elements such as arsenic (As), cadmium (Cd), and chromium (Cr) are severely regulated in fertilizers and deserve continuous investigation. Phosphate-derived Cd has been a stepping-stone toward achieving sustainable and safe worldwide food production, especially after a new regulation aiming for reduced limits of Cd in P fertilizers (EU, 2019/1009). Three pot experiments were conducted to assess the variability of As, Cd, and Cr concentrations - with a particular focus on Cd - from monoammonium phosphates (MAP 1, MAP 2, and MAP 3 from different geographic origins) and their accumulation in limed and unlimed soils, and contrasting crops, representing staple food and significant sources of these elements for humans (i.e., potato, tobacco, and rice). A diverse array of sensitive techniques for trace elements determination were used to reveal the highest level of Cd of MAP 3 (20.71 mg kg−1 MAP), which loaded the highest amounts of this element to the soil matrix and solution, plant shoots, and xylem sap, contrasting with results for MAP 1 (0.87 mg kg−1 MAP), which has almost ten times less Cd than that required for low-Cd labeling of P fertilizers (≤20 mg Cd kg−1 P2O5). MAP 3 also had the highest Cr concentration (139.3 mg kg−1 MAP). Among crops, rice accumulated 16-fold less Cd than potato plants. Liming decreased Cd in tobacco and potato shoots up to 35%. Moreover, reductions of about 20% were also observed for Cd accumulation in tubers and sap. Conversely, Cd from MAP 3 was always much more accumulated in soil solution, achieving up to 20 μg L−1, while values < 5 μg L−1 (i.e., a groundwater limit) were obtained from MAP 1. Our findings may be used as a reference in developing green labels for fertilizers in scenarios where Cd accumulation represents a potential risk for soil and human health.