Concentrations Of Organic Compounds Research Articles

Changes in the Aroma Profile and Phenolic Compound Contents of Different Strawberry Cultivars during Ripening.

Secondary metabolites, namely, phenolic and volatile organic compounds, contribute to the nutritional and organoleptic quality of the strawberry fruit. This study focuses on the changes in the content of phenolic compounds and volatile organic compounds during the ripening, from green to overripe fruit, of five strawberry cultivars ('Asia', 'CIVN 766', 'Aprica', 'Clery', and 'Malwina'). Additionally, these changes are compared with the colour of the fruit and peroxidase and polyphenol oxidase activity. Our results show that the accumulation of secondary metabolites (phenolic and volatile organic compounds) significantly changed during the ripening process for all of the studied cultivars. As for phenolic compounds, flavanols and hydroxybenzoic acid derivatives comprised between 87 and 95% of the total phenolic compound content in unripe green fruit. In contrast, anthocyanins and hydroxycinnamic acid derivatives comprised between 64 and 77% of the total phenolic compound content in overripe fruit, except in the fruit of the cultivar 'CIVN766'. When it comes to the aroma profile, the content of aldehydes decreased by 24-49% as the fruit ripened, and the accumulation of esters increased. Our study also shows that the ripening process differs among cultivars, and it is therefore necessary to define ripening indicators separately for each cultivar.

Chemical Analysis of Exhaled Vape Emissions: Unraveling the Complexities of Humectant Fragmentation in a Human Trial Study.

Electronic cigarette smoking (or vaping) is on the rise, presenting questions about the effects of secondhand exposure. The chemical composition of vape emissions was examined in the exhaled breath of eight human volunteers with the high chemical specificity of complementary online and offline techniques. Our study is the first to take multiple exhaled puff measurements from human participants and compare volatile organic compound (VOC) concentrations between two commonly used methods, proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS) and gas chromatography (GC). Five flavor profile groups were selected for this study, but flavor compounds were not observed as the main contributors to the PTR-ToF-MS signal. Instead, the PTR-ToF-MS mass spectra were overwhelmed by e-liquid thermal decomposition and fragmentation products, which masked other observations regarding flavorings and other potentially toxic species associated with secondhand vape exposure. Compared to the PTR-ToF-MS, GC measurements reported significantly different VOC concentrations, usually below those from PTR-ToF-MS. Consequently, PTR-ToF-MS mass spectra should be interpreted with caution when reporting quantitative results in vaping studies, such as doses of inhaled VOCs. Nevertheless, the online PTR-ToF-MS analysis can provide valuable qualitative information by comparing relative VOCs in back-to-back trials. For example, by comparing the mass spectra of exhaled air with those of direct puffs, we can conclude that harmful VOCs present in the vape emissions are largely absorbed by the participants, including large fractions of nicotine.

Application of commercial seaweed extract-based biostimulants to enhance adventitious root formation in ornamental cutting propagation protocols: a review

Despite significant advancements in stem-cutting propagation, insufficient rooting efficiency remains an economic burden for the ornamental nursery industry. IBA and NAA play a critical role in generating adventitious roots (AR) when applied exogenously. In sustainable agriculture, the substitution of chemical inputs, with alternative natural eco-friendly products presents a key challenge. Biostimulants can form part of a solution to mitigate such risks deriving from the use of agrochemicals, they are generally considered to be non-toxic, non-polluting, biodegradable, and non-hazardous. The current knowledge of the use of commercial seaweed extract (SE) products applied to ornamental cutting propagation has not been summarized until now. Therefore, we conducted a systematic review, and we hypothesized that SE-based biostimulant application to ornamental stem cuttings improves AR formation in terms of rooting percentage, root number, and architecture. Moreover, they increase the overall quality of a rooted cutting as dry biomass and organic compound content. The authors chose SE-based biostimulants because they have been proven to have an extremely low carbon footprint; moreover, they are expected to account for more than 33% of the global market for biostimulants and reached a value of 894 million Euros by 2022. This review focuses on (i) SE-based biostimulants, in particular, brown algae; (ii) technical information on five commercial products: Goteo®, Kelpak®, AlgaminoPlant, Bio Rhizotonic, Actiwawe and others, less known, also used as phytoregulators substitutes; (iii) applied protocols, describing dose, application method, number of treatments, cutting type; (iv) effects of applied protocols on rooting rate, root architecture and overall rooted cutting quality. Outcomes show that findings vary based on crops, cuttings, location, raw materials, composition, dose, application number and procedures, and growth environment.

Increase of the indoor concentration of volatile organic compounds after the use of incense and scented candle in studio apartments determined using passive sampling

Burning incenses and scented candles may provide harmful chemicals. Although many studies have evaluated volatile organic chemicals emitted by their use and related health risks, extension of our understanding for guiding appropriate use under various use conditions is necessary. In this study, emission characteristics of commercial incenses and scented candles were evaluated in a laboratory chamber using real-time measurement and the time-weighted average exposure concentrations of monoaromatic compounds and monoterpenes were assessed using passive samplers while volunteers living in a studio apartment use them. After burning incense, the average levels of benzene increased from 1.4 to 100 μg m−3. The presence of a wood core in commercial incense products was the main cause of high benzene emission by burning them although the increase in benzene was also influenced by factors such as the brand of the products, the number of incense sticks burned, the duration of each burning session, and ventilation period. Electrical warming of scented candles increased the levels of monoterpenes by factors of 16–30 on average. Considering the emission characteristics found in this study, exposure to benzene and monoterpenes could be mitigated by cautious use of those products in residential areas.

Tuning of polymeric membranes to mitigate fouling and removal of dissolved compounds for wastewater treatment: a Review

Tuning of polymeric membranes to mitigate fouling and removal of dissolved compounds for wastewater treatment: a Review

An integrated uncrewed aerial vehicle platform with sensing and sampling systems for the measurement of air pollutant concentrations

Abstract. In this study, an uncrewed aerial vehicle (UAV) platform with sensing and sampling systems was developed for three-dimensional (3D) measurements of air pollutant concentrations. The sensing system of this platform contains multiple microsensors and Internet of Things devices for determining the 3D distributions of four critical air pollutants and two meteorological parameters in real time. Moreover, the sampling system comprises remote-controllable gas sampling kits, each of which contains a 1 L Tedlar bag for the 3D measurement of volatile organic compound (VOC) concentrations according to the Toxic Organics-15 (TO-15) method of the US Environmental Protection Agency. The performance of the developed UAV platform was verified in experiments where it was used to detect air pollutant emissions from a large industrial zone in Taiwan that included a traditional industrial park, a precision machinery park, and a municipal waste incineration plant. Three locations were selected as field measurement sites according to the prevailing local wind direction. The vertical distributions of four critical air pollutants, the ambient temperature, and the relative humidity were determined from data gathered at the aforementioned sites in March and May 2023. A total of 56 and 72 chemical species were qualitatively and quantitatively analyzed in these two periods, respectively. The experimental results verified the feasibility of using the proposed UAV platform for accurately evaluating the air pollutant concentration distribution and transport in an industrial zone. The sampling system can be used as the sampling part of the TO-15 method, thus extending the method to measure the 3D distribution of VOCs in an area. The UAV platform can serve as a useful tool in the management of and decision-making process for air pollution in industrial areas.

Tofu Liquid Waste Treatment Using Effective Volume of Anaerobic Sequencing Batch Reactor (ASBR)

The tofu industry produces liquid waste containing high organic compounds. Organic compounds in liquid waste can threaten aquatic ecosystems if discharged directly into water bodies. One of the most effective wastewater treatment systems is the treatment using Anaerobic Sequencing Batch Reactor (ASBR). Besides being able to reduce the content of organic compounds, ASBR can produce biogas, and its decomposing microorganisms do not flow into the effluent stream. The purpose of this study was to evaluate the performance of ASBR at an effective reactor volume according to the design. This is because the use of ASBR in previous studies had not reached the operational stage and did not use an effective volume reactor. The stages of waste treatment using ASBR include the seeding, acclimatization, and operation stages. Waste treatment took place at room temperature in the reactor with an effective volume of 6 L. The operating parameters tested were MLVSS, COD, BOD, pH, and cumulative biogas volume. The results obtained show that the seeding process took 56 days, acclimatization took 10 days, and the operation lasted for 17 days. The efficiency of reducing COD concentration was 60%, the efficiency of reducing BOD concentration was 35.65%, and the cumulative volume of biogas produced was 24,120 mL at the operating stage. The use of the ASBR system at an effective volume of 6 L resulted in the successful processing of tofu liquid waste.

Molecular Characterization of Gaseous Organic Acids and Nitrogen‐Containing Compounds From Crop Straw and Wood Burning

AbstractBiomass burning serves as important sources of volatile organic compounds (VOCs), yet our understanding of the molecular characteristics of oxygenated volatile organic compounds (OVOCs) from fresh emissions remains limited. In this study, gaseous organic compounds in fresh smokes from burning typical Chinese crop straws and woods are measured using an iodide time‐of‐flight chemical ionization mass spectrometer. Approximately 750 molecular formulas are identified, with CHO compounds containing carbon, hydrogen and oxygen atoms accounting for 77%–95% of the total. C1–C3 organic acids and dicarboxylic acids dominate the total CHO signal intensities by 27%–48%, while well‐known molecular markers of biomass burning, such as monosaccharide, guaiacol and syringol derivatives, contribute 7%–17%. Notably, crop straw and wood burning emit a higher abundance of guaiacol than syringol derivatives by a factor of 5. Additionally, a variety of nitrogen‐containing compounds (mainly in the CHON group) is identified, including isocyanate, amide, amino acids, and pyridine. The mass spectral profiles of organic compounds are largely similar between crop straw and wood burning fuels, although wood burning produces higher contributions of compounds with carbon atoms numbers >10. The saturation concentrations of organic compounds are estimated using molecular formula‐based volatility parameterization, revealing that semi‐volatile and intermediate VOCs (S/intermediate volatility organic compounds (IVOCs)) predominate smoke releases by 35%–60% and 20%–43%, respectively, with only a small fraction of low‐volatility compounds. Given the widespread nature of biomass burning in winter China, our results may have significant implications for interpreting secondary organic aerosol formation through gas‐particle partitioning or aqueous‐phase reactions.

Determination of emission factors from a landfill through an inverse methodology: Experimental determination of ambient air concentrations and use of numerical modelling

The application of numeric modelling for determining the impact of landfills needs for reliable emission source data. In this study, a methodology for the characterization of the emission profiles of the different sources present in landfills for emission factors determination, applying an indirect methodology, is presented. Ambient air concentrations of volatile organic compounds (VOCs), hydrogen sulphide (H2S) and ammonia (NH3) were determined in three potentially emission sources in Can Mata landfill (Hostalets de Pierola, Catalonia, Spain): dumping areas, pre-closed zone and leachate reservoir as well as in biogas, for the determination of emission factors. Multi-sorbent bed and Tenax TA tubes were used for a wide range of VOCs sampling, and analysis was conducted through TD-GC/MS. H2S and NH3 were sampled and analysed using Radiello passive samplers. The highest total VOC (TVOC) concentrations were found in dumping areas (0.7–3.5 mg m−3), followed by leachate reservoir (0.3–0.6 mg m−3) and pre-closed area (77–165 μg m−3). On the other hand, the highest H2S and NH3 concentrations were found in leachate reservoir, presenting values of 0.8–1.1 mg m−3 and 1.7–1.8 mg m−3, respectively. With the application of odour thresholds to the concentrations obtained, the most critical compounds regarding odour annoyances were determined. The highest odour units (O.U.) were found in leachate reservoir due to H2S concentrations, whereas VOCs contributed mainly to O.U. in the dumping areas. The obtained ambient air concentrations were used for the indirect determination of the emission factors through numerical modelling using a Eulerian dispersion model. The emission factors obtained for the landfill for TVOC, H2S and NH3 were in the range of 0.44–10.9 g s-1, 0.16–1.02 g s−1 and 0.23–1.82 g s−1, respectively, depending on the emission source. Reliable emission factors are crucial to obtain landfill impact maps, which are essential for the correct management of these facilities.

VOC data-driven evaluation of vehicle cabin odor: from ANN to CNN-BiLSTM.

Emissions of volatile organic compounds (VOCs) in vehicles represent a significant problem, causing unpleasant odors. To mitigate VOCs and odors in vehicles, it is critical to choose interior parts with low odor and VOC emissions. However, prevailing odor evaluation methods are subjective, costly, and potentially harmful to the health of evaluators. In this study, we analyzed 139 automotive interior parts and 92 vehicles, establishing a cost-effective, data-driven method for odor evaluation. The contents of benzene, toluene, ethylbenzene, xylene, styrene, formaldehyde, acetaldehyde, acrolein, and total volatile organic compounds (TVOC) were detected by thermal desorption gas chromatography-mass spectrometry (TD-GC/MS) and high-performance liquid chromatography with an ultraviolet detector (HPLC-UV). Professional odor evaluators assessed the odors, identifying intensity levels from 2.0 to 4.5 in interior parts and 2.5 to 3.5 in whole vehicles. Leveraging this data, we applied four supervised learning algorithms to develop predictive models for the odor intensity of both interior parts and entire vehicles. During model training, we implemented early stopping techniques for the artificial neural network (ANN) and convolutional neural network-bidirectional long short-term memory (CNN-BiLSTM) models, while optimizing the support vector machine (SVM) and extreme gradient boosting (XGBoost) models using the GridSearch algorithm. The evaluation results reveal that the CNN-BiLSTM model performs the best, achieving an average accuracy of 89% for unknown samples within an odor intensity level of 0.5. The root mean square error (RMSE) is 0.24, and the mean absolute error (MAE) is 0.08. The model also underwent a sevenfold cross-validation, achieving an accuracy of 83.43%. Additionally, we employed SHapley Additive exPlanations (SHAP) for the interpretative analysis of the model, which confirmed the consistency of each VOC's odor contribution with human olfactory rules. By predicting odors based on VOCs through supervised learning, this study reduces the costs and enhances the efficiency and applicability of odor assessment across various vehicle interiors.

Determination of organic fluorinated compounds content in complex samples through combustion ion chromatography methods: a way to define a “Total Per- and Polyfluoroalkyl Substances (PFAS)” parameter?

Emerging contaminants are a growing concern for scientists and public authorities. The group of per-polyfluoroalkyl substances (PFAS), known as ‘forever chemicals', in complex environmental liquid and solid matrices was analysed in this study. The development of global analytical methods based on combustion ion chromatography (CIC) is expected to provide accurate picture of the overall PFAS contamination level via the determination of extractable organic fluorine (EOF) and adsorbable organic fluorine (AOF). The obtained results may be put into perspective with other methods such as targeted analyses (LC-MS/MS). The impact of pH, the presence of dissolved organic carbon and suspended particles on AOF measurements were explored. The effectiveness of the washing step to remove adsorbed inorganic fluorine (IF) has been proven for samples containing up to 8 mgF.L−1. CIC-based methods showed good repeatability and reproducibility for the complex matrices studied. Environmental applications of these methods have been tested. AOF and EOF analyses could explain between 1 % and 23 % and 0.1 % to 2 % of total organic fluorine (TOF), respectively. The sum of PFAS compounds expressed as fluorine could explain from 0.2 % to 11 % and from 0.003 % to 5 % for AOF and EOF, respectively. These results also suggest that some fluorinated compounds are not adsorbed or extractable and/or lost by volatilisation during the application of AOF and EOF analytical procedure. These findings highlight that AOF and EOF are not entirely efficient as proxy to assess “total PFAS” for assessing environmental contamination by PFAS. However, these methods could still be applied to gain a better understanding of the sources and fate of PFAS in the environment.

Volatile organic compounds (VOCs) emission interferes with real-time regulatory monitoring of ozone in urban atmosphere

Ozone (O3) pollution is a global concern. The real-time ultraviolet (UV) photometric method is commonly employed at the majority of O3 regulatory monitoring stations around the world. High concentrations of volatile organic compounds (VOCs) have been confirmed to interfere with the real-time O3 monitoring by this method. However, it is unknown whether VOCs emission in the urban environment has an impact on the O3 regulatory monitoring. Here we revealed that high VOCs concentration in an urban industrial zone may result in positive artifacts in O3 measurement at a nearby atmospheric monitoring station. These VOCs were dominated by styrene with concentrations at a mg/m3 level, which was closely related to the abnormally higher O3 measurements observed in this station at night. Experimental validation confirmed that benzene homologues could induce evidently O3 measurement artifacts by the regulatory UV photometric method. By equipped with a temperature control system for the O3 measurement scrubber to desorb VOCs adsorbed by O3 the scrubbing catalyst, the O3 measurement artifacts showed an effective decline with a maximum of 30 ppb in the field cases. This study shed light on the improvement of the air quality assessment by coordination of the monitoring stations and approaches in the future.

Influence of the Drying Process on the Volatile Profile of Different Capsicum Species.

Chili is a globally significant spice used fresh or dried for culinary, condiment, and medicinal purposes. Growing concerns about food safety have increased the demand for high-quality products and non-invasive tools for quality control like origin tracing and safety assurance. Volatile analysis offers a rapid, comprehensive, and safe method for characterizing various food products. Thus, this study aims to assess the impact of the drying process on the aromatic composition of various Capsicum species and to identify key compounds driving the aromatic complexity of each genetic makeup. To accomplish these objectives, the aroma was examined in fruits collected from 19 different pepper accessions (Capsicum sp.) belonging to four species: one ancestral (C. chacoense) and three domesticated pepper species (C. annuum, C. baccatum and C. chinense). Fresh and dried samples were analyzed using a headspace PTR-TOF-MS platform. Our findings reveal significant changes in the composition and concentration of volatile organic compounds (VOCs) from fresh to dried Capsicum. Notably, chili peppers of the species C. chinense consistently exhibited higher emission intensity and a more complex aroma compared to other species (both fresh and dried). Overall, the data clearly demonstrate that the drying process generally leads to a reduction in the intensity and complexity of the aromatic compounds emitted. Specifically, fresh peppers showed higher volatile organic compounds content compared to dried ones, except for the two sweet peppers studied, which exhibited the opposite behavior. Our analysis underscores the variability in the effect of drying on volatile compound composition among different pepper species and even among different cultivars, highlighting key compounds that could facilitate species classification in dried powder. This research serves as a preliminary guide for promoting the utilization of various pepper species and cultivars as powder, enhancing product valorization.

BTEX Assessment among Informal Charcoal-Burning Food Traders for Cleaner and Sustainable Environment

This study assessed the cleaner and sustainable environment by measuring emission levels of benzene, toluene, ethylbenzene, and xylene (BTEX) from informal food traders using charcoal as the primary source of energy at a flea market in Fordsburg, Johannesburg. Volatile organic compounds (VOCs) were measured using a real-time monitor (MiniRae 3000 photoionization detector); an indoor air quality (IAQ) monitor was used to monitor environmental parameters and passive samplers in the form of Radiello badges, which were used to determine BTEX emissions from charcoal used during food preparation. Measurements were taken at 1.5 m above ground assuming the receptor’s breathing circumference using PID and Radiello. PID data were downloaded and analyzed using Microsoft Excel(Version 2019). Radiellos were sent to the laboratory to determine the BTEX levels from the total VOCs. The total volatile organic compound (TVOC) concentration over the combustion cycle was 306.7 ± 62.8 ppm. The flaming phase had the highest VOC concentration (547 ± 110.46 ppm), followed by the ignition phase (339.44 ± 40.6 ppm) and coking with the lowest concentration (24.64 ± 14.3). The average BTEX concentration was 15.7 ± 5.9 µg/m3 corresponding to the entire combustion cycle. BTEX concentrations were highest at the flaming phase (23.6 µg/m3) followed by the ignition (13.4 µg/m3) and coking phase (9.45 µg/m3). Ignition phase versus the flaming phase, there was a significant difference at 95% at a p-value of 0.09; ignition phase versus the coking phase, there was a significant difference at 95% at a p-value of 0.039; and coking phase versus the flaming phase, there was a significant difference at 95% at a p-value of 0.025. When compared to the occupational exposure limits (OELs), none of the exposure concentrations (BTEX) were above the 8 h exposure limit. The findings of this study suggest that charcoal, as a source of energy, can still be a useful and sustainable fuel for informal food traders. Shortening the ignition and flaming phase duration by using a fan to supply sufficient air can further reduce exposure to VOCs.

Easy-to-Use MOX-Based VOC Sensors for Efficient Indoor Air Quality Monitoring.

This research paper presents a case study on the application of Metal Oxide Semiconductor (MOX)-based VOC/TVOC sensors for indoor air quality (IAQ) monitoring. This study focuses on the ease of use and the practical benefits of these sensors, drawing insights from measurements conducted in a university laboratory setting. The investigation showcases the straightforward integration of MOX-based sensors into existing IAQ monitoring systems, highlighting their user-friendly features and the ability to provide precise and real-time information on volatile organic compound concentrations. Emphasizing ease of installation, minimal maintenance, and immediate data accessibility, this paper demonstrates the practicality of incorporating MOX-based sensors for efficient IAQ management. The findings contribute to the broader understanding of MOX sensor capabilities, providing valuable insights for those seeking straightforward and effective solutions for indoor air quality monitoring. This case study outlines the feasibility and benefits of utilizing MOX-based sensors in various environments, offering a promising avenue for the widespread adoption of user-friendly technologies in IAQ management.

Biocide and other semi-volatile organic compound concentrations in settled indoor dust of CRESPI daycare centers and implication for public health

This study investigates the presence of biocides and other semi-volatile organic compounds (SVOCs) in cleaning products used in daycare centers and health impact through ingestion of settled dust by young children. In Paris metropolitan area, 106 daycares area were investigated between 2019–2022. Fifteen substances were analyzed in settled indoor dust by gas chromatography-tandem mass spectrometry. Detection rates and concentrations ranged from 5 to 100%, and <LOD to 14,267 ng/g, respectively. Galaxolide and benzophenone showed highest median concentration respectively 884 ng/g and 819 ng/g. The daily intakes (DI) of the substances through settled dust ingestion were evaluated and compared to those from food, inhalation, and dermal contact reported in the literature. Daily intakes from settled dust for musks, triclosan, geraniol, benzophenone, 2-phenylphenol, bifenthrin, and 4-n-nonylphenol were lower than those reported in the literature. The proportion of dust ingestion to total DI was negligible, except for benzophenone (DI=34%) for children aged 3 to 11 months. The DIs were well below the respective toxicological reference values for isothiazolinones, 4-tert-butylphenol, chlorocresol, and diclosan. Our results suggest that exposure to these biocides and the other SVOCs, taken individually, by dust ingestion in daycares, is not a major public health concern. Benzophenone, presumed carcinogen for humans, may require further investigation because of its presence in several daycares.

Health Risk Assessment from Exposure to Ambient Volatile Organic Compounds (VOCs) at a Truck Tire Factory in the Yangtze River Delta, China

Occupational health risk assessments of exposure to VOCs still need to be extensively studied to improve the safety standards in the industry. Based on the monitoring of organic pollutants at various workstations in a truck tire factory in Jiangsu Province, both semi-quantitative and quantitative health risk assessment methods were employed to assess health risk levels. The findings indicated that VOCs were categorized into five classes, which included alkanes, aromatics, halocarbons, carbon disulfide, and oxygenated volatile organic compounds (OVOCs). The highest concentration of total volatile organic compounds (TVOCs) was found in shaping workshop; alkanes were the most abundant class (74.2%), followed by aromatics (24.02%) and OVOCs (1.96%). Although the results of the semi-quantitative risk assessment showed that most of the organic compounds had low R values, various kinds of VOCs were detected; particularly, many harmful organic compounds (such as toluene, ethyl benzene) were detected in all the sampling sites. The quantitative risk in the calendering and vulcanizing workshop exceeded the acceptable level; both the carcinogenic risk of ethylbenzene in the tire-strip storage room, and trichloroethylene and perchloroethylene in the calendering workshop were unacceptable. Thus, the calendering and vulcanizing processes in rubber tire manufacturing should be priority-controlled processes.

Enhanced methane recovery from anaerobic membrane bioreactor coupled with cold plasma pretreatment for rapid hydrolysis and nitrogen removal

Research to increase biomethane recovery efficiency from thickened sewage sludge (TSWS) using sustainable anaerobic digestion (AD) in municipal wastewater treatment plants is ongoing. Pretreating substrates is known to increase organic biodegradation and biomethane conversion rates in AD. Cold plasma (CP), a recently adopted advanced oxidation processes (AOP) has emerged as an alternative to accelerate pretreatment times under different operation variables. This study assessed raw and CP-pretreated TSWS in an anaerobic sequencing batch reactor (ASBR) and anaerobic membrane bioreactor (AnMBR). The effects of incremental organic loading rates (OLR) and nitrogenous compounds concentration on enhanced CH4 bioconversion efficiency were evaluated. We found that the AnMBR outperformed the ASBR, with an overall chemical oxygen demand (COD) conversion rate of 67%, lower total nitrogen (T–N) accumulation (594 mg L−1), and an overall methane yield of 0.24 L CH4 g−1 COD. CP pretreatment improved TSWS AD, resulting in more efficient COD removal and methane recovery. This study suggests that CP technology is a promising pretreatment to improve AD when treating TSWS.

Direct visualization of pyrene diffusion in polyethylene and polyoxymethylene passive samplers

While passive sampling of ultra-low aqueous concentrations of hydrophobic organic compounds in environmental aqueous media has emerged as a promising analytical technique, there is a lack of good understanding of the fundamental diffusive processes. In this research, we used a fluorophore, pyrene, as a model compound to track diffusion in polymers through absorption and environmental media exchange processes. We directly tracked the penetration of pyrene into polyethylene (PE) and polyoxymethylene (POM) rods during absorption from water by sectioning the rod after different stages of absorption and observing the fluorescence signal through a microscope. Diffusion profiles of pyrene in polymers were simulated by numerical integration of Fickian diffusion. The results indicated that the uptake process in PE is governed by Fick's law and the absorption and desorption kinetics are similar in this polymer. However, the observed uptake profiles of pyrene in POM were non-Fickian and the release kinetics out of POM was slower compared to uptake into the polymer. We show that slower desorption from POM makes corrections for nonequilibrium using performance reference compounds (PRCs) problematic for deployments in water or sediment where there is significant advection. However, for static sediment deployments, the overall kinetics of exchange is controlled by slow transport through sediment and the hysteretic behavior of POM may not preclude the use of PRCs to interpret equilibrium status.

338 Non-occupational herbicide and VOC exposures detected in dogs with multicentric lymphoma: a model for human non-Hodgkin lymphoma

OBJECTIVES/GOALS: The objective of this study was to determine whether pet dogs with multicentric lymphoma (ML), a spontaneous, immunocompetent model for human non-Hodgkin lymphoma (NHL), are exposed to higher concentrations of herbicides and volatile organic compounds (VOCs) compared to matched unaffected control dogs. METHODS/STUDY POPULATION: We are prospectively enrolling dogs with ML within a single high-risk breed, the boxer dog, along with age-matched control boxers sampled within the same season. We are measuring urinary concentrations of the herbicides glyphosate (in Roundup®) and 2,4-D, as well as stable urinary metabolites of the VOCs benzene and 1,3-butadiene. To assess the genotoxic potential of herbicide and VOC exposures, we are using reverse dosimetry to estimate plasma exposures, and exposing healthy canine PBMC’s to these concentrations of herbicides and VOCs in vitroto assess double stranded DNA damage using the Comet Chip assay. RESULTS/ANTICIPATED RESULTS: Preliminary data show significantly higher benzene exposures, measured by the stable benzene metabolite PHMA, and significantly higher 2,4-D exposures at the time of diagnosis in cases versus controls. All dogs had measurable exposures to 1,3-butadiene (measured as its stable metabolite DHBM) and glyphosate.In vitro results show significant genotoxicity thresholds of 0.1 uM for both glyphosate and 2,4-D in dog lymphoid cells. To date, these predicted plasma exposures have not been reached in vivo in boxer dogs with ML or unaffected control boxers. DISCUSSION/SIGNIFICANCE: Canine multicentric lymphoma resembles human NHL and is a potentially useful model of non-occupational chemical risk for NHL in people. The goal of this research is to identify potentially preventable non-occupational chemical risk for lymphoma and support evidence-based remediation strategies to decrease lymphoma risk in both humans and dogs.