Concentration Of Large Particles Research Articles

Study on Atomization Mechanism of Oil Injection Lubrication for Rolling Bearing Based on Stratified Method

The atomization mechanism of lubrication fluid in rolling bearings under high-speed airflow between the rings was investigated. A simulation model of gas–liquid two-phase flow in angular contact ball bearings was developed, and the jet lubrication process between the bearing rings was simulated using FLUENT computational fluid dynamics software (Ansys 19.2). The complex motion boundary conditions of the rolling elements were addressed through a layered approach. We can obtain more accurate boundary layer flow field changes and statistics of the diameter of oil particles in lubricating oil atomization, which lays the foundation for analyzing the law of influence on lubricating oil atomization. The results show that as the number of boundary layer layers increases, the influence of the boundary layer flow field on the lubricating oil is more obvious. The oil particle size is excessively flat, and the concentration of large particles of oil appears to decrease. As the speed increases, the amount of oil in the cavity decreases, but the oil droplets are also fragmented, which intensifies the atomization and reduces the particle diameter. This reduces the Sauter Mean Diameter (SMD), which is not conducive to the lubrication of the bearing. Under different injection pressures, when the injection pressure is large, it is beneficial to the lubrication of the bearing.

You can bring plankton to fecal indicator organisms, but you cannot make the plankton graze: particle contribution to E. coli and MS2 inactivation in surface waters.

Organisms that are associated with feces ("fecal indicator organisms") are monitored to assess the potential for fecal contamination of surface water bodies in the United States. However, the effect of the complex mixtures of chemicals and the natural microbial community within surface water ("particles") on fecal indicator organism persistence is not well characterized. We aimed to better understand how particles, including biological (e.g., potential grazers) and inert (e.g., minerals) types, affect the fecal indicator organisms Escherichia coli K-12 ("E. coli") and bacteriophage MS2 in surface waters. A gradient of particles captured by a 0.2-µm-pore-size filter ("large particles") was generated, and the additional particles and dissolved constituents that passed through the filter were deemed "small particles." We measured the ratio of MS2 and E. coli that survived over a 24-h incubation period for each condition (0%-1,000% large-particle concentration in raw water) and completed a linear regression that included large- and small-particle coefficients. Particles were characterized by quantifying plankton, total bacterial cells, and total solids. E. coli and MS2 persistence was not significantly affected by large particles, but small particles had an effect in most waters. Small particles in higher-salinity waters had the largest, negative effect on E. coli and MS2 survival ratios: Significant small-particle coefficients ranged from -1.7 to -5.5 day-1 in the marine waters and -0.89 to -3.2 day-1 in the fresh and estuarine waters. This work will inform remediation efforts for impaired surface water bodies.IMPORTANCEMany surface water bodies in the United States have organisms associated with fecal contamination that exceed regulatory standards and prevent safe recreation. The process to remediate impaired water bodies is complicated because these fecal indicator organisms are affected by the local environmental conditions. For example, the effect of particles in surface water on fecal indicator concentrations are difficult to quantify in a way that is comparable between studies and water bodies. We applied a method that overcomes this limitation to assess the effects of large particles, including natural plankton that could consume the seeded fecal indicator organisms. Even in environmental water samples with diverse communities of plankton present, no effect of large particles on fecal indicator concentrations was observed. These findings have implications for the interpretation and design of future studies, including that particle characterization of surface water may be necessary to assess the fate of fecal indicators.

Triglyceride-rich lipoprotein, remnant cholesterol, and apolipoproteins CII, CIII, and E in patients with schizophrenia

Patients with schizophrenia show a disproportionally increased risk of cardiovascular disease. Hypertriglyceridemia is prevalent in this population; however, how this relates to levels of remnant cholesterol, triglyceride (TG)-rich lipoprotein (TRL) particle size and composition, TG turnover, and apolipoprotein (apo) and angiopoietin-like protein (ANGPTL) concentrations is unknown. Fasting levels of cholesterol (total [TC], LDL-C, HDL-C, non-HDL-C and remnant cholesterol) and TG were determined in 110 patients diagnosed with schizophrenia, and 46 healthy controls. TRL particle size, concentration and composition, and β-hydroxybutyrate (TG turnover marker) were assessed by NMR. Levels of apoCII, apoCIII, apoE, ANGPTL3, ANGPTL4, and ANGPTL8 were measured by ELISA, and apoCII, apoCIII and apoE were further evaluated in HDL and non-HDL fractions. Patients with schizophrenia had significantly elevated TG, TG:apoB ratio, non-HDL-C, remnant cholesterol, non-HDL-apoCII and non-HDL-apoCIII, and HDL-apoE (all P < 0.05), lower HDL-C and apoA-I (all P < 0.001), and comparable apoB, TC, TC:apoB ratio, LDL-C, β-hydroxybutyrate, ANGPTL3, ANGPTL4 and ANGPTL8 to healthy controls. Patients had a 12.0- and 2.5-fold increase in the concentration of large and medium TRL particles respectively, but similar cholesterol:TG ratio within each particle. Plasma TG, remnant cholesterol, and large and medium TRL particle concentrations correlated strongly with apoCII, apoCIII, and apoE in the non-HDL fraction, and with apoCIII and apoE in the HDL fraction in patients with schizophrenia. Differences in TG, HDL-C, TRL particle concentrations, apoCIII, and apoE persisted after adjustment for conventional risk factors. These results are consistent with impaired TRL lipolysis and clearance in patients with schizophrenia which may be responsive to targeting apoCIII.

Effect of Stabilized nZVI Nanoparticles on the Reduction and Immobilization of Cr in Contaminated Soil: Column Experiment and Transport Modeling.

Batch and transport experiments were used to investigate the remediation of loamy sand soil contaminated with Cr(VI) using zero-valent iron nanoparticles (nZVI) stabilized by carboxymethylcellulose (CMC-nZVI). The effect of pH, ionic strength (IS), and flow rate on the removal efficiency of Cr(VI) were investigated under equilibrium (uniform transport) and non-equilibrium (two-site sorption) transport using the Hydrus-1D model. The overall removal efficiency ranged from 70 to over 90% based on the chemical characteristics of the CMC-nZVI suspension and the transport conditions. The concentration and pH of the CMC-nZVI suspension had the most significant effect on the removal efficiency and transport of Cr(VI) in the soil. The average removal efficiency of Cr(VI) was increased from 24.1 to 75.5% when the concentration of CMC-nZVI nanoparticles was increased from 10 to 250 mg L-1, mainly because of the increased total surface area at a larger particle concentration. Batch experiments showed that the removal efficiency of Cr(VI) was much larger under acidic conditions. The average removal efficiency of Cr(VI) reached 90.1 and 60.5% at pH 5 and 7, respectively. The two-site sorption model described (r2 = 0.96-0.98) the transport of Cr(VI) in soil quite well as compared to the uniform transport model (r2 = 0.81-0.98). The average retardation of Cr(VI) was 3.51 and 1.61 at pH 5 and 7, respectively, indicating earlier arrival for the breakthrough curves and a shorter time to reach maximum relative concentration at lower pH. The methodology presented in this study, combining column experiment and modeling transport using the Hydrus-1D model, successfully assessed the removal of Cr(VI) from polluted soils, offering innovative, cost-effective, and environmentally friendly remediation methodologies.

Some Thoughts on Modeling Abrasion-Corrosion: Wear by Hard Particles in Corrosive Environments

Wear by hard particles can involve abrasion or erosion and is one of the most severe forms of wear. When a corrosive environment is present, the material loss rate can be significantly increased due to interactions (synergy) between the mechanical and chemical/electrochemical actions. In developing strategies for mitigating such adverse synergistic effect, it is important to understand the complex effect of various parameters on material loss under given tribocorrosion conditions. In this paper, a model is presented for wear-corrosion synergy in abrasive wear by hard particles applicable to many conditions in both the marine renewable (abrasion by high concentrations of large sand particles on tidal turbines) and extractive metallurgy (abrasive wear in mineral extraction). The mechanical wear loss is modeled based on the grooving mechanism (micro-cutting/micro-ploughing). Wear-enhanced corrosion is calculated from the fresh surface areas generated by grooving and the corresponding transient corrosion current. The concept of “corrosion-degraded layer” on the worn surface is introduced to account for the corrosion-enhanced wear; within this corrosion-degraded layer, the material loss rate is higher under the same mechanical wear conditions than in the material that is unaffected by corrosion. Based on the model, the effect of wear conditions on synergy in hard particle wear-corrosion has been discussed. The relative thickness of the corrosion-degraded layer to the depth of hard particle penetration (grooving) in the mechanical wear is found to be an important parameter in determining the relative severity of synergy in different tribocorrosion systems. Good qualitative agreement has been observed between the predictions and published experimental results obtained from a range of abrasion-corrosion and erosion-corrosion lab testing.

Effect of percolation on the deformation of isotropic electrorheological elastomers under external electric fields

In this study we investigate the influence of the filler's concentration with an emphasis on the percolation of particles on the field-induced deformation of isotropic, disc shaped electrorheological elastomers (EREs) with barium titanate filler. It was found that above the percolation threshold concentration (>34.7 wt%) the magnitude of the fully reversible contraction was enhanced by a factor of ∼10 in the low field strength region (E≈ 0.2 MVm−1). At higher field strength (E= 1.1 MVm−1) the percolation had no effect on the induced strain, and regardless of the particle's concentration it saturated around 1.2%. It was shown that for isotropic EREs the optimal particle loading is just above the percolation threshold. If the filler content exceeds the threshold concentration, then the same deformation can be achieved with much lower field intensity, but even larger particle concentration does not enhance the performance further.

The Effect of Carbohydrate Restriction on Lipids, Lipoproteins, and Nuclear Magnetic Resonance-Based Metabolites: CALIBER, a Randomised Parallel Trial.

Low-carbohydrate high-fat (LCHF) diets can be just as effective as high-carbohydrate, lower-fat (HCLF) diets for improving cardiovascular disease risk markers. Few studies have compared the effects of the UK HCLF dietary guidelines with an LCHF diet on lipids and lipoprotein metabolism using high-throughput NMR spectroscopy. This study aimed to explore the effect of an ad libitum 8-week LCHF diet compared to an HCLF diet on lipids and lipoprotein metabolism and CVD risk factors. For 8 weeks, n = 16 adults were randomly assigned to follow either an LCHF (n = 8, <50 g CHO p/day) or an HCLF diet (n = 8). Fasted blood samples at weeks 0, 4, and 8 were collected and analysed for lipids, lipoprotein subclasses, and energy-related metabolism markers via NMR spectroscopy. The LCHF diet increased (p < 0.05) very small VLDL, IDL, and large HDL cholesterol levels, whereas the HCLF diet increased (p < 0.05) IDL and large LDL cholesterol levels. Following the LCHF diet alone, triglycerides in VLDL and HDL lipoproteins significantly (p < 0.05) decreased, and HDL phospholipids significantly (p < 0.05) increased. Furthermore, the LCHF diet significantly (p < 0.05) increased the large and small HDL particle concentrations compared to the HCLF diet. In conclusion, the LCHF diet may reduce CVD risk factors by reducing triglyceride-rich lipoproteins and improving HDL functionality.

Development and printability of diamond-containing composite filament for material extrusion

PurposeMaterial extrusion technology is considered to be an effective way to realize the accurate and integrated manufacturing of high-performance metal diamond tools with complex structures. The present work aims to report the G4 binder that can be used to create metal composite filament loading high concentrations of large diamond particles through comparative experiments.Design/methodology/approachThe quality of filaments was evaluated by surface topography observation and porosity measurement. And the printability of filaments was further studied by the tensile test, rheological test, shear analysis and printing test.FindingsThe results show that the G4 binder exhibits the best capacity for loading diamonds among G1–G4. The L4 filament created with G4 has no defects such as pores, cracks and patterns on the surface and section, and has the lowest porosity, which is about 1/3 of the L1. Therefore, the diamond-containing composite filament based on G4 binder exhibits the best quality. On the other hand, the results of the tensile test of L5–L8 filaments reveal that as the diamond content increases from 10% to 30%, the tensile strength of the filament decreases by 29.52%, and the retention force coefficient decreases by 15.74%. This can be attributed to the formation of inefficient bonding areas of the clustered diamond particles inside the composite filament, which also leads to a weakening of the shear strength. Despite this, the results of the printing test show that the diamond-containing composite filament based on the G4 binder has reliable printability.Originality/valueTherefore, the G4 binder is considered to solve the most critical first challenge in the development of diamond-containing filament.

X-ray radiography 4D particle tracking of heavy spheres suspended in a turbulent jet

The suspension of a heavy sphere by an upward jet is a classical fluid mechanics experiment to demonstrate the fluid forces acting on an object. In the range of the parameter space where the sphere can be suspended, the dynamics can either be regular, i.e., with oscillations around an equilibrium position, or chaotic, with extreme events leading to large deviations from that equilibrium region. The existence and characteristics of suspension regimes of several heavy spheres in such flow configurations remain open questions. Spheres compete for the equilibrium position and come very close to each other, resulting in large local particle concentrations that prevent direct imaging. Relatively high speed X-ray radiography along with the radioSphereanalysis technique is leveraged here to study the time-resolved 3D trajectory of each individual sphere in a vertical jet. radioSphereis an X-ray analysis method that retrieves the 3D information out of a single 2D radiography using a priori knowledge of the imaging geometry (E. Andò et al., 2021), which due to the imaging modality imposes no limitations on the optical properties of the water. The 3D ＋ time kinematics yield the evolution of the statistics of the position and velocity of the spheres as a function of the number of spheres and for two jet Reynolds numbers. Drastic changes in behavior occur when many spheres are present, leaving a clear signature on the temporal dynamics and on the exploration of the flow volume, where spheres can remain on the bottom of the vessel for long periods of time, resulting in only partial suspension. In addition to the suspension capacity, the interactions between spheres are explored with statistics of pair separation distances, which, together, allow for quantitative arguments to introduce suspension regimes of a collection of spheres in an upward vertical jet.

Fatty fish consumption reduces lipophilic index in erythrocyte membranes and serum phospholipids

Background and aimsLipophilic index (LI) has been introduced to assess the overall fatty acid lipophilicity and as a simple estimate of membrane fluidity. However, little is known on effect of diet on LI. We tested if Camelina sativa oil (CSO) high in ALA, fatty fish (FF) or lean fish (LF) affect LI as compared to control diet and, secondarily, if the LI is associated with HDL lipids and functionality and LDL lipidome. Methods and resultsWe used data from two randomized clinical trials. The AlfaFish intervention lasted 12 weeks and 79 subjects with impaired glucose tolerance were randomized to FF, LF, CSO or control group. In the Fish trial, 33 subjects with myocardial infarction or unstable ischemic heart attack were randomized to FF, LF or control group for 8 weeks. LI was calculated from erythrocyte membrane fatty acids in AlfaFish and from serum phospholipids in Fish trial. HDL lipids were measured using high-throughput proton nuclear magnetic resonance spectroscopy. There was a significant decrease in LI in the FF group in the AlfaFish (fold change 0.98 ± 0.03) and in the Fish trial (0.95 ± 0.04) and the decrease differed from that of control group in both trials and from CSO group in the AlfaFish study. There were no significant changes in LI in LF or CSO groups. The mean diameter of HDL particles and concentration of large HDL particles were inversely associated with LI. ConclusionFF consumption decreased LI indicating better membrane fluidity in subjects with impaired glucose tolerance or coronary heart disease.

Metabolic profiling of MRI-measured liver fat in the UK Biobank.

Liver fat associates with obesity-related metabolic disturbances and may precede incident diseases. Metabolomic profiles of liver fat in the UK Biobank were investigated. Regression models assessed the associations between 180 metabolites and proton density liver fat fraction (PDFF) measured 5 years later through magnetic resonance imaging, as the difference (in SD units) of each log metabolite measure with 1-SDhigher PDFF among those without chronic disease and not taking statins, and by diabetes and cardiovascular diseases. After accounting for confounders, multiple metabolites were associated positively with liver fat (p < 0.0001 for 152 traits), particularly extremely large and very large lipoprotein particle concentrations, very low-density lipoprotein triglycerides, small high-density lipoprotein particles, glycoprotein acetyls, monounsaturated and saturated fatty acids, and amino acids. Extremely large and large high-density lipoprotein concentrations had strong inverse associations with liver fat. Associations were broadly comparable among those with versus without vascular metabolic conditions, although negative, rather than positive, associationswere observed between intermediate-density and large low-density lipoprotein particles among those with BMI≥25 kg/m2 , diabetes, or cardiovascular diseases. Metabolite principal components showed a 15% significant improvement in risk prediction for PDFF relative to BMI, which was twice as great (but nonsignificant) compared with conventional high-densitylipoproteincholesterol and triglycerides. Hazardous metabolomic profiles are associated with ectopic hepatic fat and are relevant to risk of vascular-metabolic disease.

Effects of physical properties of supercritical water on coarse graining of particle cluster

The coarse graining of particle cluster is of great significance to the study of a fluidized bed. The effects of variations in the physical properties of supercritical water on the coarse graining of particle cluster are investigated in this work. The drag coefficient distributions of the particle cluster are not influenced by the physical properties. However, the physical properties have effects on the values of drag coefficient. The effects of physical properties are weaker in the case of large particle concentrations. Furthermore, the physical properties lead to that the effect of particle cluster wake on the drag of downstream particles being significantly different from that of constant property flow. The variation trend of drag of coarse graining particle is consistent with that of isolated particle. The physical properties lead to significant differences in the values of drag. In this paper, the dominance of the effects of physical properties in a variety of cases is confirmed. Finally, a physical properties effect model is developed accordingly.

Particle-size segregation in self-channelized granular flows

Geophysical mass flows such as debris flows, dense pyroclastic flows and snow avalanches can self-channelize on shallow slopes. The confinement afforded by formed levees helps to maintain the flow depth, and hence mobility, allowing self-channelized flows to run out significantly farther than unconfined, spreading flows. Levee formation and self-channelization are strongly associated with particle-size segregation, but can also occur in monodisperse flows. This paper uses the monodisperse depth-averaged theory of Rochaet al.(J. Fluid Mech., vol. 876, 2019, pp. 591–641), which incorporates a hysteretic friction law and second-order depth-averaged viscous terms. Both of these are vital for the formation of a travelling wave that progressively deposits a pair of levees just behind the front. The three-dimensional velocity field is reconstructed in a frame moving with the front assuming Bagnold flow. This enables a bidisperse particle-size segregation theory to be used to solve for the large and small particle concentrations and particle paths in three-dimensions, for the first time. The model shows that the large particles tend to segregate to the surface of the flow, forming a carapace that extends over the centre of the channel, as well as along the external sides and base of the levee walls. The small particles segregate downwards, and are concentrated in the main channel and in the inner levee walls. This supports the contention that a low-friction channel lining provides a secondary mechanism for run-out enhancement. It is also shown that the entire theory scales with particle diameter, so experiments with millimetre-sized particles provide important insights into geophysical-scale flows with boulders and smaller rock fragments. The model shows that self-channelization does not need particle-size segregation to occur, but supports the hypothesis that particle-size segregation and the associated frictional feedback can significantly enhance both the flow mobility and the levee strength.

Evaluation of Virus-Free Manufacture of Recombinant Proteins Using CRISPR-Mediated Gene Disruption in Baculovirus-Infected Insect Cells.

The manufacture and downstream processing of virus-like particles (VLPs) using the baculovirus expression vector system (BEVS) is complicated by the presence of large concentrations of baculovirus particles, which are similar in size and density to VLPs, and consequently are difficult to separate. To reduce the burden of downstream processing, CRISPR-Cas9 technology was used to introduce insertion-deletion (indel) mutations within the Autographa californica multiple nucleopolyhedrovirus (AcMNPV) gp64 open reading frame, which encodes the major envelope protein of AcMNPV. After comfirming the site-specific targeting of gp64 leading to reduced budded virus (BV) release, the gag gene of human immunodeficiency virus type 1 was expressed to produce Gag VLPs. This approach was effective for producing VLPs using the BEVS whilst simultaneously obstructing BV release.

Dalcetrapib and anacetrapib increase apolipoprotein E-containing HDL in rabbits and humans

The large HDL particles generated by administration of cholesteryl ester transfer protein inhibitors (CETPi) remain poorly characterized, despite their potential importance in the routing of cholesterol to the liver for excretion, which is the last step of the reverse cholesterol transport. Thus, the effects of the CETPi dalcetrapib and anacetrapib on HDL particle composition were studied in rabbits and humans. The association of rabbit HDL to the LDL receptor (LDLr) in vitro was also evaluated. New Zealand White rabbits receiving atorvastatin were treated with dalcetrapib or anacetrapib. A subset of patients from the dal-PLAQUE-2 study treated with dalcetrapib or placebo were also studied. In rabbits, dalcetrapib and anacetrapib increased HDL-C by more than 58% (P < 0.01) and in turn raised large apo E-containing HDL by 66% (P < 0.001) and 59% (P < 0.01), respectively. Additionally, HDL from CETPi-treated rabbits competed with human LDL for binding to the LDLr on HepG2 cells more than control HDL (P < 0.01). In humans, dalcetrapib increased concentrations of large HDL particles (+69%, P < 0.001) and apo B-depleted plasma apo E (+24%, P < 0.001), leading to the formation of apo E-containing HDL (+47%, P < 0.001) devoid of apo A-I. Overall, in rabbits and humans, CETPi increased large apo E-containing HDL particle concentration, which can interact with hepatic LDLr. The catabolism of these particles may depend on an adequate level of LDLr to contribute to reverse cholesterol transport.

APOE Genotypes Modulate Inflammation Independently of Their Effect on Lipid Metabolism

The association between APOE genotypes and cardiovascular disease (CVD) is partially mediated by LDL-cholesterol concentration but persists after adjusting for lipid levels and other cardiovascular risk factors. Data from the Aragon Workers Health Study (AWHS) (n = 4159) and the Lipid Unit at the Hospital Universitario Miguel Servet (HUMS) (n = 3705) were used to investigate the relationship between C-reactive protein (CRP) levels and APOE genotype. Lipoprotein particle and GlycA concentrations were analyzed in a subsample from AWHS. APOE genotyping was carried out by the Sanger method in both cohorts. APOE4 carriers had significantly lower levels of CRP than APOE3 carriers. Furthermore, APOE4 carriers had cholesterol-enriched LDL particles compared to APOE2 carriers. APOE4 carriers also had higher concentrations of small, medium, and large LDL particles. CRP levels were not associated with lipoprotein particle number, size, or composition. GlycA levels were not associated with APOE genotypes. However, GlycA levels were significantly associated with the size and the amount of cholesterol contained in HDL, VLDL, and LDL particles. APOE genotype influences CRP concentration regardless of lipid profile. APOE2 carriers showed the highest CRP levels, followed by APOE3 and APOE4. A more atherogenic lipid profile, but not inflammatory markers could partly explain the higher CVD risk observed in APOE4 carriers.

Dependent Scattering in Thick and Concentrated Colloidal Suspensions

This study demonstrates numerically and experimentally that dependent scattering occurs in colloidal suspensions and can, counterintuitively, cause their transmittance to increase with increasing particle volume fraction. Radiation transfer through colloidal suspensions has been modeled with the radiative transfer equation (RTE) assuming independent scattering. Then, the effective absorption and scattering coefficients of the disperse medium are predicted as the sum of the cross sections of all particles divided by the volume of suspension. However, this approach is not valid when the average interparticle distance is on the same order of magnitude as the wavelength, corresponding to large particle concentrations. The latter situation is referred to as dependent scattering. Rigorously accounting for dependent scattering requires solving Maxwell’s equations, but is limited to relatively thin suspensions. Here, we extend the Radiative Transfer with Reciprocal Transactions (R2T2) method to predict the normal-hemispherical transmittance of thick and concentrated plane-parallel slabs of nonabsorbing nanoparticle suspensions and to rigorously account for dependent scattering effects. The radiation characteristics of a large number of particle ensembles were estimated using the superposition T-matrix method and the RTE was solved using Monte Carlo method combined with strategies for sampling the previously computed radiation characteristics. A wide range of particle size parameter, volume fraction, and optical properties as well as colloidal suspension thickness were investigated. Dependent scattering effects were found to prevail for particle volume fractions as low as 1% depending on the particle size and refractive index. Evidences of dependent scattering were also observed experimentally in the visible normal-hemispherical transmittance of 10 mm thick colloidal suspensions of silica nanoparticles with diameter between 16 and 30 nm and particle volume fraction ranging from 2% to 15%. Moreover, good agreement was found between experimental measurements and numerical predictions from the R2T2 method. By contrast, assuming independent scattering underestimated systematically the normal-hemispherical transmittance, especially for large particle volume fraction. As such, this paper presents, for the first time, experimental validation of the R2T2 method and its ability to account for dependent scattering.

Significant continental source of ice-nucleating particles at the tip of Chile's southernmost Patagonia region

Abstract. The sources and abundance of ice-nucleating particles (INPs) that initiate cloud ice formation remain understudied, especially in the Southern Hemisphere. In this study, we present INP measurements taken close to Punta Arenas, Chile, at the southernmost tip of South America from May 2019 to March 2020, during the Dynamics, Aerosol, Cloud, And Precipitation Observations in the Pristine Environment of the Southern Ocean (DACAPO-PESO) campaign. The highest ice nucleation temperature was observed at −3 ∘C, and from this temperature down to ∼-10 ∘C, a sharp increase of INP number concentration (NINP) was observed. Heating of the samples revealed that roughly 90 % and 80 % of INPs are proteinaceous-based biogenic particles at &gt;-10 and −15 ∘C, respectively. The NINP at Punta Arenas is much higher than that in the Southern Ocean, but it is comparable with an agricultural area in Argentina and forestry environment in the US. Ice active surface site density (ns) is much higher than that for marine aerosol in the Southern Ocean, but comparable to English fertile soil dust. Parameterization based on particle number concentration in the size range larger than 500 nm (N&gt;500 nm) from the global average (DeMott et al., 2010) overestimates the measured INP, but the parameterization representing biological particles from a forestry environment (Tobo et al., 2013) yields NINP comparable to this study. No clear seasonal variation of NINP was observed. High precipitation is one of the most important meteorological parameters to enhance the NINP in both cold and warm seasons. A comparison of data from in situ and lidar measurements showed good agreement for concentrations of large aerosol particles (&gt;500 nm) when assuming continental conditions for retrieval of the lidar data, suggesting that these particles were well mixed within the planetary boundary layer (PBL). This corroborates the continental origin of these particles, consistent with the results from our INP source analysis. Overall, we suggest that a high NINP of biogenic INPs originated from terrestrial sources and were added to the marine air masses during the overflow of a maximum of roughly 150 km of land before arriving at the measurement station.

Determining depletion interactions by contracting forces.

Depletion forces are fundamental for determining the phase behavior of a vast number of materials and colloidal dispersions and have been used for the manipulation of in- and out-of-equilibrium thermodynamic states. The entropic nature of depletion forces is well understood; however, most theoretical approaches, and also molecular simulations, work quantitatively at moderate size ratios in much diluted systems since large size asymmetries and high particle concentrations are difficult to deal with. The existing approaches for integrating out the degrees of freedom of the depletant species may fail under these extreme physical conditions. Thus, the main goal of this contribution is to introduce a general physical formulation for obtaining the depletion forces even in those cases where the concentration of all species is relevant. We show that the contraction of the bare forces uniquely determines depletion interactions. Our formulation is tested by studying depletion forces in binary and ternary colloidal mixtures. We report here results for dense systems with total packing fractions of 45% and 55%. Our results open up the possibility of finding an efficient route to determine effective interactions at a finite concentration, even under non-equilibrium thermodynamic conditions.

Separation behaviour of polypropylene mixed particles under the coupling of vibration and airflow

Granular matter is a disordered system composed of a large number of particles, which appears as a complex physical phenomenon under external excitation. To study the separation behaviour of polypropylene particles, the separation of particles under various excitation methods was simulated based on the DEM-CFD coupling method. The results showed that polypropylene particles did not show Reverse Brazil Nut Separation under the single excitation of either vertical vibration or pulsed airflow, while under the double excitation of vertical vibration and constant airflow, the large particles located in the upper layer of small particles started to sink and formed Reverse Brazil Nut Separation. By analysing the change of voidage in particle bed, the explanation of the change of particle separation state by filling theory is verified. The airflow velocity increased from 15 m·s−1 to 21 m·s−1, and the volume concentration of large particles at the bottom increased by 27.615%, which promoted the formation of Reverse Brazil Nut Separation. The frequency and amplitude increased to 15 Hz, 20 mm or decreased to 5 Hz, 5 mm, respectively, and the volume concentration of large particles at the bottom decreased by 22.025%, 23.807% and 46.712%, 59.003%, indicating that too large or too small vibration acceleration would inhibit the formation of Reverse Brazil Nut Separation. In addition, changing the shape of the container or increasing the filling rate of particles in the container can eliminate the phenomenon of small particles accumulating in the corner.