Compressed Pattern Research Articles

Wrinkles, Ridges, Miura-Ori, and Moiré Patterns in MoSe2 Using Neural Networks.

Effects of lateral compression on out-of-plane deformation of two-dimensional MoSe2 layers are investigated. A MoSe2 monolayer develops periodic wrinkles under uniaxial compression and Miura-Ori patterns under biaxial compression. When a flat MoSe2 monolayer is placed on top of a wrinkled MoSe2 layer, the van der Waals (vdW) interaction transforms wrinkles into ridges and generates mixed 2H and 1T phases and chain-like defects. Under a biaxial strain, the vdW interaction induces regions of Miura-Ori patterns in bilayers. Strained systems analyzed using a convolutional neural network show that the compressed system consists of semiconducting 2H and metallic 1T phases. The energetics, mechanical response, defect structure, and dynamics are analyzed as bilayers undergo wrinkle-ridge transformations under uniaxial compression and moiré transformations under biaxial compression. Our results indicate that in-plane compression can induce self-assembly of out-of-plane metasurfaces with controllable semiconducting and metallic phases and moiré patterns with unique optoelectronic properties.

Sources of systematic errors in human path integration.

Triangle completion is a task widely used to study human path integration, an important navigation method relying on idiothetic cues. Systematic biases (compression patterns in the inbound responses) have been well documented in human triangle completion. However, the sources of systematic biases remain controversial. We used cross-validation modeling to compare three plausible theoretical models that assume that systematic errors occur in the encoding outbound path solely (encoding-error model), executing the inbound responses solely (execution-error model), and both (bicomponent model), respectively. The data for cross-validation modeling are from a previous study (Qi et al., 2021), in which participants learned three objects' locations (one at the path origin, that is, home) very well before walking each outbound path and then pointed to the objects' original locations after walking the outbound path. The modeling algorithm used one inbound response (i.e., response to the home) or multiple inbound responses (i.e., responses to two nonhome locations and the home) for each outbound path. The algorithm of using multiple inbound responses demonstrated that the bicomponent model outperformed the other models in accounting for the systematic errors. This finding suggests that both encoding the outbound path and executing the inbound responses contribute to the systematic biases in human path integration. In addition, the results showed that the algorithm using only the home response could not distinguish among these 3 models, suggesting that the typical triangle-completion task with only the home response for each outbound path cannot determine the sources of the systematic biases. (PsycInfo Database Record (c) 2022 APA, all rights reserved).

Influence of alveolar bone height on the biomechanical behavior of roots restored with custom-made posts-and-cores.

This study evaluated the influence of alveolar bone height and post type on compressive force resistance, fracture pattern, and stress distribution in endodontically treated teeth. Bovine roots were endodontically treated and divided into eight groups (n=10) according to alveolar bone height (normal alveolar bone and alveolar bone loss - 2 and 5 mm from the margin of the crown, respectively) and post type (prefabricated glass fiber post, anatomic glass fiber post, customized milled glass fiber post-and-core and customized milled polyetheretherketone (PEEK) post-and-core). Mechanical fatigue was simulated (300.000 cycles/50 N/1.2Hz). Compression force resistance (N) was analyzed by two-way ANOVA and Tukey test (α=0.05). Fracture patterns were described as percentages. Stress distribution was analyzed by finite element analysis. Significant diferences were found for alveolar bone height (P < 0.0001): normal alveolar bone groups showed higher mean values of compression force resistance compared to alveolar bone loss groups, while no significant differences were found for post type (P=0.4551), and there was no double interaction between them (P=0.5837). Reparable fractures were more predominant in normal alveolar bone groups, especially in the milled glass fiber and PEEK post-and-core groups. Stress distribution was similar in groups with prefabricated glass fiber posts and milled PEEK posts-and-cores, and the alveolar bone loss condition significantly increased stress concentration and strain values, mainly on apical dentin. Alveolar bone loss due to physiological aging and/or periodontal disease may lead to increased risk of restored tooth failure, although milled glass fiber and PEEK posts-and-cores provide more reparable fractures. Custom-made glass fiber and PEEK post-and-cores are interesting options, since they enable clinicians to work with a single-body post-and-core system that avoid several materials interfaces and fits well in the root canal provided promising results to improve the failure behavior of restored roots, as they offer more reparable fractures even in situations of alveolar bone loss.

Research on Mesoscopic Characteristics of Limestone Grouting Diffusion Based on Discrete Fracture Network

The limestone stratum has well-developed rock fissures and abundant groundwater. Under extreme rainstorm conditions, tunnel surrounding rock seepage is serious especially. In order to reveal the grouting diffusion mechanism of karst fractured rock mass and realize effective water plugging, in this paper, the basic mechanical parameters of limestone are obtained by laboratory triaxial test, and the porosity distribution of rock mass is obtained by nuclear magnetic resonance test. The PFC2D discrete element software is used to simulate the mechanical characteristics of compressive deformation and fracture propagation pattern of the limestone and compared with the triaxial test results. Discrete fracture network theory is used to establish PFC2D numerical simulation of grouting diffusion model of fractured rock mass. And the filling diffusion mechanism and stress variation rule of cement slurry in fractured limestone under different grouting pressure are studied. The results show that (1) During the grouting process, the micro-cracks expand along the tip of the existing cracks, and extend to the surrounding cracks to finally form through cracks, so as to achieve the effect of grouting reinforcement. (2) With the increase of grouting pressure, the maximum displacement of particles increases continuously, but with the prolongation of grouting time, the maximum displacement of particles reaches a stable state and no longer increases. (3) During the grouting process of the fractured rock mass, with the increase of grouting time, the stress of the fractured rock mass finally reaches a stable state. This study provides an important reference for the setting of grouting parameters of limestone rock mass.

Physical and mechanical changes on titanium base of three different types of hybrid abutment after cyclic loading.

This study investigated the physical and mechanical changes in the titanium base of three different hybrid abutment materials after cyclic loading by estimating the post-load reverse torque value (RTV), compressive side fulcrum wear pattern of titanium base, and surface roughness. A total of 24 dental implants were divided into three groups (n = 8 each): Group Z, LD, and P used zirconia, lithium disilicate, and polyetheretherketone, respectively, for hybrid abutment fabrication. RTV was evaluated after cyclic loading with 50 N for 1.2 × 106 chewing cycles. The compressive sides of the titanium bases were analyzed using a scanning electron microscope, and the roughness of the affected areas was measured using an optical profilometer after loading. Datasets were analyzed using Kruskal-Wallis test followed by Mann-Whitney tests with the Bonferroni correction (α = .05). Twenty-three samples passed the test; one LD sample fractured after 770,474 cycles. Post-load RTV varied significantly depending on the hybrid-abutment material (P = .020). Group P had a significantly higher median of post-load RTVs than group Z (16.5 and 14.3 Ncm, respectively). Groups LD and P showed minor signs of wear, and group Z showed a more pronounced wear pattern. While evaluating compressive side affected area roughness of titanium bases, lower medians were shown in group LD (Ra 0.16 and Rq 0.22 µm) and group P (Ra 0.16 and Rq 0.23 µm) than in group Z (Ra 0.26 and Rq 0.34 µm); significant differences were found only among the unaffected surface and group Z. The hybrid abutment material influences the post-load RTV. Group Z had a more pronounced wear pattern on the compressive side of titanium base; however, the surface roughness was not statistically different among the hybrid-abutment groups.

A Critical Evaluation of Moment Gradient (Cb) Factror Calculation Procedures for Singly Symmetric I-Section Members

This paper explores the manual calculation of the elastic lateral-torsional buckling resistance of prismatic singly symmetric I-section members having a variation in the bending moment between the brace points. The paper shows that the quarter-point moment gradient factor, Cb, equation in the AISC Specification (2016), as modified by its Commentary, is inaccurate for reverse-curvature bending of singly symmetric I-section members. In addition, the paper explains that the Cb equations in the current AASHTO Specifications (2020) provide some accounting for the different patterns of compression in the separate flanges for cases involving moment reversal. To rectify the limitations of the ASC and AASHTO methods, the paper recommends a modified form of an alternative quarter-point Cb equation proposed by Wong and Driver (2010). For singly symmetric cases involving moment reversal, the terms in the quarter-point equation are replaced by the ratio of the moments to the corresponding elastic buckling moment based on Cb = 1, considering which flange is in compression at each of the locations where the moments are sampled. The studies show that the Wong and Driver equation, with this modification, provides substantially improved accuracy compared to the existing AASHTO and ASC equations for reverse-curvature bending with slightly less calculation effort. In addition, the paper demonstrates the accuracy of the direct application of the Wong and Driver equation for single-curvature bending cases.

Open-Source Culture Platform for Multi-Cell Type Study with Integrated Pneumatic Stimulation

Mechanical forces can influence the structure and development of healthy and cancerous cells and tissue microenvironments, acting on their physical shape and promoting non-genetic alterations during growth. For this reason, it is interesting to investigate the role of dynamic hydrostatic compression on such cultures, to assess the role of such stimuli on key parameters, such as cell differentiation, cell stiffness and cytoskeleton rearrangements. In this work, we present a versatile Arduino-based pneumatic system for the stimulation of a cell culture performed in a standard multi-well plate, designed to work inside a CO2 incubator. The system is capable of modifying the hydrostatic pressure inside a dedicated culture chamber following the desired pattern, and, thus, providing a mechanical hydrostatic stimulus to a cell culture growing inside it. In the present work, a human respiration-like compression pattern was used, to mimic the mechanical stress conditions inside the human lung alveoli, and make the platform compatible with the development of lung tissues and organoids.

Verbosity with retelling: Narrative discourse production in temporal lobe epilepsy

To examine micro- and macrolinguistic underpinnings of circumstantiality in temporal lobe epilepsy (TLE), we examined the elicited narrative output of 15 individuals with TLE and 14 controls. To replicate and extend Field and colleagues’ (2000) work, participants were asked to produce five immediately consecutive elicitations of an eight-frame cartoon “Cowboy Story” (Joanette et al., 1986). Following transcription and coding, detailed multi-level discourse analysis demonstrated a typical pattern of compression in controls. The narratives produced by individuals with TLE were less fluent, cohesive, and coherent across trials: producing fewer novel units and more repetitive and extraneous content. Significant group by trial interactions in sample length, spontaneous duration, and statements, were not explained by seizure burden, age, or lexical retrieval deficits. These findings suggest that they do not benefit from repeated engagement with a narrative in the same manner as controls. Disturbed social cognition and pragmatics in TLE might underpin communication inefficiencies.

Mechanostimulation of Multicellular Organisms Through a High-Throughput Microfluidic Compression System.

During embryogenesis, coordinated cell movement generates mechanical forces that regulate gene expression and activity. To study this process, tools such as aspiration or coverslip compression have been used to mechanically stimulate whole embryos. These approaches limit experimental design as they are imprecise, require manual handling, and can process only a couple of embryos simultaneously. Microfluidic systems have great potential for automating such experimental tasks while increasing throughput and precision. This article describes a microfluidic system developed to precisely compress whole Drosophila melanogaster (fruit fly) embryos. This system features microchannels with pneumatically actuated deformable sidewalls and enables embryo alignment, immobilization, compression, and post-stimulation collection. By parallelizing these microchannels into seven lanes, steady or dynamic compression patterns can be applied to hundreds of Drosophila embryos simultaneously. Fabricating this system on a glass coverslip facilitates the simultaneous mechanical stimulation and imaging of samples with high-resolution microscopes. Moreover, the utilization of biocompatible materials, like PDMS, and the ability to flow fluid through the system make this device capable of long-term experiments with media-dependent samples. This approach also eliminates the requirement for manual mounting which mechanically stresses samples. Furthermore, the ability to quickly collect samples from the microchannels enables post-stimulation analyses, including -omics assays which require large sample numbers unattainable using traditional mechanical stimulation approaches. The geometry of this system is readily scalable to different biological systems, enabling numerous fields to benefit from the functional features described herein including high sample throughput, mechanical stimulation or immobilization, and automated alignment.

Influence of accelerating admixtures on high early strength cement performance using heat curing method

Recently, early-strength concrete has been applied widely in high-rise buildings and rigid pavement maintenance due to its advantages in time and cost reduction, and its construction efficiency. Admixtures including setting accelerators and hardening accelerators, are usually used to achieve high early-strength concrete. However, the mechanism of those admixtures at the early age of cement hydration was not clearly examined. Hence, this research investigated the influence of setting accelerators, hardening accelerators and their combinations on the hydration of cement paste using the heat curing method for the application to rigid pavement maintenance, and precast concrete. By evaluating the differences between the setting time, early compressive strength, exothermic curves, XRD patterns, and Fe-SEM images of the cement paste with and without adding Potassium bromide (KBr), Calcium formate (Ca(HCOO)2), and their combination, the results indicated that the addition of setting accelerators such as Ca(HCOO)2 had a significant effect on the setting behavior of cement paste instead of the compressive strength enhancement. Therefore, the addition of Ca(HCOO)2 also had a low effect on the mechanical strength of the paste when increasing the curing temperature. In contrast, the addition of hardening accelerators such as KBr had a greater accelerating impact on the mechanical strength of the cement paste when increasing the curing temperature. Combining a setting accelerator and a hardening accelerator could greatly improve cement paste early-age compressive strength for both normal and heat curing. Based on the XRD analysis, and the Fe-SEM results, numerous hydration products were formed in early-age cement hydration by the addition of 2.0 % KBr with 3.0 % Ca(HCOO)2, especially in 8 h of 50 °C curing temperature. Hence, this combination significantly enhanced the early mechanical strength of the cement pastes.

Finite element modelling of reinforced concrete one-way slabs strengthened using basalt textile reinforced mortars

PurposeThis paper employs a textile reinforcement strain comparison to study the response of Textile Reinforced Mortars (TRM) strengthened reinforced concrete one-way slab members in flexure using the finite element method. Basalt TRM (BTRM) is a relatively new composite in structural strengthening applications. Experimental data on BTRMs are limited in the literature and numerical analyses can help further the understanding of this composite. With this notion, Abaqus finite element software is utilised to create a numerical method to capture the mechanical response of strengthened slab members instead of time-consuming laboratory experiments.Design/methodology/approachA numerical method is developed and validated using existing experimental data set on one-way slabs strengthened using Basalt TRMs from the literature. An explicit solver is utilised to analyse the finite element model created using calibrated Concrete Damage Plasticity (CDP) parameters according to the experimental requirements. The generated model is applied to extract load, deflection and rebar strains sustained by strengthened reinforced concrete slabs as observed from the experimental reference chosen. The applicability of the developed model was studied beyond parametric studies by comparing the generated finite element tensile strain by the textile fibre with available formulae.FindingsCDP calibration done has shown its adaptability. The predicted results in the form of load versus deflection, tensile and compressive damage patterns from the numerical analysis showed good agreement with the experimental data. A parametric study on various concrete strength, textile spacing and TRM bond length obtained shows TRM’s advantages and its favourability for external strengthening applications. A set of five formulae considered to predict the experimental strain showed varied accuracy.Originality/valueThe developed numerical model considers strain sustained by the textile fibre to make results more robust and reliable. The obtained strain from the numerical study showed good agreement with the experiment results.

2C-Net: integrate image compression and classification via deep neural network

Providing effective support for intelligent vision tasks without image reconstruction can save numerous computational costs in the era of big data. With the help of the Deep Neural Network (DNN), integrating image compression and intelligent vision tasks at a feature representation level becomes a new promising approach. But how to perform non-linear transformation for image compression and extract image patterns for intelligent vision tasks simultaneously within a shared DNN remains an open problem. In this paper, a versatile framework is studied to explore the common feature representations for both image compression and classification. A fully shared latent representation is extracted in a more compact way to support compression and classification task. The General Feature Extraction and Feature-Analytic Classifier are proposed to generate and utilize shared latent representation. Then, the whole framework is joint optimized by considering multiple factors (i.e., rate, quality, and accuracy). Extensive experiments are carried out to validate that the proposals can improve the performance of both learning-based image compression and classification. The results show that the proposed method outperforms the conventional codecs like BPG and JPEG2000 in compression efficiency, while achieving acceptable accuracy on different image classification datasets without image reconstruction.

Punching Shear Characterization of Steel Fiber-Reinforced Concrete Flat Slabs

Punching shear failure in thin slabs under concentrated loads can cause shear stresses near columns. The use of steel fiber is a practical way to improve a slab-column connection's punching strength and deformation capacity. In this study, the capacity and behavior of steel fiber-reinforced concrete flat slabs are examined under punching shear force. Ten small-scale flat slabs were tested, eight of which had steel fiber and two without. Two parameters are studied in this paper, which are the fiber volume ratio (from 0% to 2%) and the stub column load shape (circle and square). The test results include the concrete compressive strength, crack patterns, punching shear, and load-defection behavior of the slabs. Based on the experimental results, it was found that the punching shear capacity of slabs with steel fiber (S5) increased by 21.8% compared to slabs without steel fiber (S1), and the slabs with steel fiber had more ductility compared to the slabs without fiber. Doi: 10.28991/HIJ-2022-03-04-08 Full Text: PDF

Metamorphic Evolution and Orogenic Process Related to the Eastern Paleo-Tethyan Warm Subduction and Indochina–South China Collision

Abstract The eastern Paleo-Tethyan Jinshajiang–Ailaoshan–Song Ma orogenic belt in the Southeast Tibetan Plateau represents the tectonic boundary between the Indochina and South China blocks. Regional Cenozoic lithospheric strike-slip movements caused by the India–Asia collision have modified many of the pristine geological records associated with the Indosinian orogeny. The lack of reliable petrological evidences, particularly of high-pressure (HP) metamorphism, has hindered the tracing of the evolutionary history of the Paleo-Tethyan orogenic belt. We report the mineralogy, geochemistry, geochronology and thermodynamic modelling of eclogite lenses/blocks and their host garnet–phengite schists from the Song Ma Suture Zone of Northwest Vietnam and reveal their protolith origins and metamorphic evolution. The eclogites are geochemically similar to mid-ocean ridge basalt, showing weak depletions in high field-strength elements, positive to slightly negative whole-rock ɛNd(t) ratios (−1.69 to +5.15) and slightly high 87Sr/86Sr(t) ratios (0.70466–0.70834). The igneous protolith of the eclogites formed in the late Silurian (425.4 ± 3.6 Ma; igneous zircon dating, 638–459 Ma TDM dating), which makes them the oldest known mid-ocean ridge mafic rocks in an ancient Paleo-Tethyan Ocean. Various eclogites preserve similar peak mineral assemblages (garnet + omphacite + phengite + rutile + quartz ± epidote/clinozoisite ± kyanite ± winchite) under indistinguishable peak conditions. Their prograde P–T trajectories show a uniform pattern of progressive heating and weak compression along a geothermal gradient of 8°C–10°C/km, indicating a warm subduction setting at a low angle that contrasts with the cold oceanic subduction recorded in the adjacent Paleo-Tethyan suture zones. Combined with detrital U–Pb ages from previous studies, our geochronological data indicate that the host schists originated from continental crust within the South China Block and underwent a pervasive Triassic HP metamorphism related to the Indosinian orogeny. The eclogites and host schists yielded HP metamorphic ages of 239–234 Ma and retrogressive amphibolite-facies metamorphic ages of 231–229 Ma, suggesting rapid cooling (14.0°C–21.6°C/Myr) and exhumation (6.4 km/Myr) from the mantle to the crust. The Song Ma eclogites and their host schists formed when the final ocean closure transitioned to the initial Indochina–South China collision. The Song Ma eclogites and their host schists provide essential information on the opening and closure of the eastern Paleo-Tethys and the subsequent amalgamation of Southeast Asian continental fragments.

Prospective study of surgical outcomes of cervical myelopathy based on its etiology, duration of affection and radiological patterns of compression

&lt;p&gt;&lt;strong&gt;Background: &lt;/strong&gt;Cervical spondylotic myelopathy (CSM) is considered the commonest cause of spinal cord dysfunction in individuals above 55 years of age and if left untreated, permanent cord damage may occur. This could contribute to increased dependence and reduced quality of life in older individuals. A prospective cohort study done in patients with cervical myelopathy who were admitted and operated after considering inclusion and exclusion criteria.&lt;strong&gt;&lt;/strong&gt;&lt;/p&gt;&lt;p&gt;&lt;strong&gt;Methods&lt;/strong&gt;: A prospective cohort study done in patients with cervical myelopathy who were admitted and operated after considering inclusion and exclusion criteria. Total 30 patients included in study. patients were operated according to patterns of compression. Anterior/posterior decompression SOS instrumentation was done according to POC. Pre-op and post-op Nurick’s grading, pre-op and post-op modified Japanese orthopaedics association (mJOA) scores were used for comparison. Patients were followed up for period of 1 year from surgical intervention. Recovery rate calculated using preop and post op mJOA scores.&lt;/p&gt;&lt;p&gt;&lt;strong&gt;Results&lt;/strong&gt;: Overall satisfactory surgical outcome found in patients of cervical myelopathy&lt;sub&gt;, &lt;/sub&gt;out of 30 patients, 9 patients of pattern of compression I (POC I) had recovery rate (RR) of (91.6±7.8) , 8 patients of POC II had RR of (78.4±14.8), 6 patients of POC III had RR of (73.5±11.1), 4 patients of POC IV had RR of (74.9±29.2), 3 patients of POC IVv had RR of (80.4±4.1).the assessment of the final outcome was done using mJOA scoring system and Nurick’s grading system.&lt;/p&gt;&lt;p&gt;&lt;strong&gt;Conclusions: &lt;/strong&gt;Anterior cervical discectomy and fusion (ACDF) for POC I (one- or two-level anterior cord compression) and POC II (one or two levels of anterior and posterior cord compression) give good surgical outcome. Cervical laminectomy and SOS instrumentation is recommended for POC III (3 levels of anterior cord compression), IV (3 or more levels of anterior compression and development of narrow canal with multiple posterior compression) and IV variant (similar to POC IV with one or two levels, being more significant than the others).earlier diagnosis, prompt radiological investigations, individualizing surgical protocol, proper surgical techniques and proper follow-up evaluation are key in management of patients of cervical myelopathy.&lt;/p&gt;

A Quantitative Study of Micro and Macro Mechanical Parameters Based on the PFC3D Flat-Joint Model.

The flat-joint model, which constructs round particles as polygons, can suppress rotation after breakage between particles and simulate more larger compression and tension ratios than the linear parallel-bond model. The flat-joint contact model was chosen for this study to calibrate the rock for 3D experiments. In the unit experiments, the triaxial unit was loaded with flexible boundaries, and the influence of each microscopic parameter on the significance magnitude of the macroscopic parameters (modulus of elasticity E, Poisson’s ratio ν, uniaxial compressive strength UCS, crack initiation strength σci, internal friction angle φ and uniaxial tensile strength TS) was analysed by ANOVA (Analysis of Variance) in an orthogonal experimental design. Among them, Eƒ, kƒ has a significant effect on E; Cƒ and kƒ have a significant effect on ν; Cƒ, σƒ and kƒ have a significant effect on UCS; Cƒ; σƒ and Eƒ have a significant effect on TS; Rsd has a significant effect on σci; and φf, Eƒ, kƒ, μƒ, and σƒ have a significant effect on φ. Regressions were then carried out to establish the equations for calculating the macroscopic parameters of the rock material so that the three-dimensional microscopic parameters of the PFC can be quantitatively analysed and calculated. The correctness of the establishment of the macroscopic equations was verified by comparing the numerical and damage patterns of uniaxial compression, Brazilian splitting, and triaxial experiments with those of numerical simulation units in the chamber.

Effect of distal interlocking of a cephalomedullary femoral nail on peri-implant fractures: A sawbone biomechanical analysis

BackgroundA large proportion of hip fractures involve inter-trochanteric fractures which are managed by cephalomedullary nails. There is ongoing debate about the advantages and disadvantages of locked versus unlocked long cephalomedullary femoral nails in the treatment of intertrochanteric fractures. The objectives of our study are to evaluate the biomechanical effects of a distal interlocking bolt on the type of peri-implant fractures in a healed intertrochanteric fracture with long cephalomedullary nail fixation. Methods20 femoral sawbone specimens were prepared with the TFN-ADVANCED Proximal Femoral Nailing System (TFNA) and divided into 2 groups: locked and unlocked. The specimens were subjected to axial loading force until failure. Compressive forces, strain and fracture patterns were compared between the 2 groups. ResultsThere was no significant difference in the mean load to failure of the unlocked specimens compared to locked specimens. However, there was significant difference in the mean compressive stress at the time of failure with the unlocked specimen (1.79±0.17 MPa) compared to the locked group (1.92±0.05 MPa) (p < 0.05). Video review analysis showed unlocked specimens consistently having basi-cervical type peri-implant fractures while locked specimens showed complex, compound fractures of the head-neck region with 2 or more fracture propagation points. ConclusionDistal-locked long cephalomedullary nails in a healed intertrochanteric fracture model are able to tolerate higher compressive stress at the point of failure but demonstrate more complex peri-implant fracture patterns in the femoral head-neck region as compared to unlocked specimens.

Mechanism of improvement in the shear performance of RC beams due to multiple small transverse openings

This paper evaluated the improvement effect of multiple small circular transverse openings (diameter is 1/10 of member height) on the shear performance of RC beams without shear reinforcement and explained the shear resistance mechanism, using three dimensional Rigid-Body-Spring-Method (3D RBSM). First, 3D RBSM was employed to reproduce the shear loading test on the RC beams with multiple small circular transverse openings, and the contributions of beam and arch actions to the shear resistance at each loading stage was evaluated. The analytical load-deflection relationship and cracking behavior were in good consistent with the experiment, and it was noted that the connecting line of the opening centers (line of openings) could control the path of critical diagonal crack, and transfer the failure mode of one of the beams from the diagonal tension pattern to the shear compression pattern. Moreover, the shear strength and ultimate deflection of this beam with openings were significantly improved due to the increase in the shear resistance contribution of arch action. Furthermore, the analysis of additional cases with three transverse openings at each shear span were conducted aiming to explore the possibility that a proper setting of openings can reliably improve the shear performance of RC beams. The line of openings was on a straight line and passed through the loading point at the same side, and the main parameter was set as the angle of the line of openings to beam axis (25°-50°). As a result, the role of the transverse openings in improving the shear performance was confirmed and the corresponding mechanism was explained based on the investigation on the beam and arch actions and crack behaviors.

Predicting fracture in the proximal humerus using phase field models

Proximal humerus impacted fractures are of clinical concern in the elderly population. Prediction of such fractures by CT-based finite element methods encounters several major obstacles such as heterogeneous mechanical properties and fracture due to compressive strains. We herein propose to investigate a variation of the phase field method (PFM) embedded into the finite cell method (FCM) to simulate impacted humeral fractures in fresh frozen human humeri. The force-strain response, failure loads and the fracture path are compared to experimental observations for validation purposes. The PFM (by means of the regularization parameter ℓ0) is first calibrated by one experiment and thereafter used for the prediction of the mechanical response of two other human fresh frozen humeri. All humeri are fractured at the surgical neck and strains are monitored by Digital Image Correlation (DIC).Experimental strains in the elastic regime are reproduced with good agreement (R2=0.726), similarly to the validated finite element method (Dahan et al., 2022). The failure pattern and fracture evolution at the surgical neck predicted by the PFM mimic extremely well the experimental observations for all three humeri. The maximum relative error in the computed failure loads is 3.8%. To the best of our knowledge this is the first method that can predict well the experimental compressive failure pattern as well as the force-strain relationship in proximal humerus fractures.

Application Of The Phase Doppler Measurement Technique For The Characterization Of Supersonic Gas Atomization

A dual-mode phase Doppler measurement system has been set up for the characterization of the complex spray produced through supersonic gas atomization. The atomizer design has been based on a generic close-coupled configuration operated with water and air, which leads to high local Mach numbers and complex patterns of compression and expansion waves within the gas flow field. As a result, the dense spray is characterized by high particle velocities and a wide range of particle sizes, which proves challenging for experimental investigations. Measurements of local particle size and velocity distributions have been performed in various radial positions within the spray downstream of the atomizer, where the spray is fully developed. The set point of operation, which is defined by the gas stagnation pressure and the liquid mass flow rate, has been varied systematically, covering a wide range. By decoupling both operational parameters, their influence on the atomization result has been investigated independently. Furthermore, the atomizer geometry has been varied in terms of liquid nozzle diameter and liquid nozzle protrusion length. In accordance with data from the literature, the gas stagnation pressure has been observed to lead to decreasing median particle size and dispersion of the particle size, when increased. However, as a novel finding, the atomization result has been shown to be more sensitive to changes in the liquid mass flow rate. Thus, increasing the liquid mass flow rate results in an increase in both the median particle size and the dispersion of the particle size. The relationship between the atomization result and the gas-to-liquid ratio has been clearly shown to be ambiguous, that is, a function of the gas stagnation pressure and the liquid mass flow rate. Neither the liquid nozzle diameter nor the liquid nozzle protrusion length have been found to have an influence on the median particle size. However, the latter clearly influences the dispersion of the particle size in a complicated way, while the effect of the liquid nozzle diameter is more subtle. It has been concluded that the complex coupling between operational parameters and the specific atomizer design evident in supersonic gas atomization requires a deeper understanding of the local gas flow field and its interaction with the liquid flow.