Color Development Research Articles

The H3K27me3 histone mark correlates with repression of colour and aroma development post-harvest in strawberry fruit.

Strawberry ripening is non-climacteric, and post-harvest fruit enter senescence and deteriorate rapidly. Chilled storage induces transcriptome wide changes in gene expression, including the down-regulation of aroma related genes. Histone marks are associated with transcriptional activation or repression; the H3K27me3 mark is mainly associated with repression of gene expression. Here genes associated with H3K27me3 were identified through ChIP-seq in ripe red strawberry fruit at harvest and after 5 days of chilled storage in the dark. The number of ChIP peaks increased with storage time, indicating an increased role for this mark in regulation of gene expression following chilled dark storage. Comparing ChIP-seq data to RNA-seq data from the same material identified 440 genes whose expression correlates with H3K27me3 repression. Abiotic stress genes, especially cold stress response genes, were down-regulated during storage. Increased association with the H3K27me3 mark indicates that they may be repressed via this epigenetic mark. Other functional groups included cell wall and carbohydrate metabolism. The association with the H3K27me3 mark of two transcription factors (FaHY5 and FaTRAB1) and FaADH, involved in ester biosynthesis, was validated by ChIP-PCR. These three genes are all down-regulated during storage and indicate a network of H3K27me3 gene repression affecting both anthocyanin and ester biosynthesis.

Simple synthesis of AgInS2/ZnS core/shell quantum dots with wide tunable emission wavelength for white light-emitting diodes

Phosphor with efficient and broad range emission is necessary for lighting applications. I-III-VI group quantum dots (QDs) have the advantages of non-toxic composition and large adjustable spectrum range, and have potential applications in the field of lighting. However, the efficient luminescence of these QDs at shorter wavelengths still needs further study, which is crucial for the development of high color rendering index white light LED devices (WLEDs). In this work, wide visible range emitting AgInS2/ZnS QDs with broad band and high luminous efficiency were obtained by altering the Ag/In ratios and Zn2+ inter-diffusion with cation of AgInS2. Photo-luminescent (PL) wavelength range of the obtained core-shell structured AgInS2/ZnS extended from 703 nm to 524 nm with high PL quantum yield (QY) and stability. The champion device based on the optimized AgInS2/ZnS QDs exhibits warm white light (correlated color temperature = 3652 K) characteristics with high color rendering index (CRI Ra) of 92.85 while maintaining excellent color stability under different driving currents. These properties are far superior to those of WLEDs with YAG phosphor.

Improvement of the color of potato chips from cold-stored tubers by pretreatment with ultrasonication.

Low-temperature sweetening is a crucial aspect in the potato chips industry because of the initiation of browning. The present study aimed to investigate the effect of ultrasonication on the concentrations of reducing sugars, sucrose, asparagine and chip color on tubers with different characteristics. Therefore, samples of the cultivars (cvs.) Nicola, Laura and Golden Wonder were used in this study. The tubers were initially stored at 4 °C and a relative humidity of 90% for 18 weeks. Ultrasonication was applied at 25 and 50 °C for 10, 20 and 30 min. The results showed that ultrasonication contributed to improve the color of the chips produced from the chip cultivar (cv. Golden Wonder), as well as the non-chip cultivars (cvs. Nicola and Laura). The concentration of reducing sugars and sucrose is the main factor for the color development of the chips. Increased temperature and extended ultrasonication duration correlate with more pronounced cell wall disruption. The present study revealed that ultrasonication could be considered as a pretreatment for production of chips from cold-stored tubers. However, it is necessary to validate the feasibility of this application in an upscaled process. © 2024 Society of Chemical Industry.

Electrochemistry–glucosemeter–smartphone integrated multi-mode biosensor for accurate detection of aflatoxin B1

BackgroundAflatoxin B1 (AFB1) is a widely distributed toxic contaminant in food and poses a serious threat to public health. Therefore, an accurate, simple, cost-effective and on-site assay method is needed for sensitive detection of AFB1. Aptamer shows great potential in the construction of biosensor due to its high specificity and affinity. Multimodal biosensor based on aptamer is highly suitable for the analysis of AFB1 under complex conditions. And the detection results in different modes can be verified with each other, which greatly improves the accuracy of AFB1 detection. ResultsHerein, accurate detection of AFB1 was achieved through the development of a multi-mode biosensor integrating electrochemistry, glucosemeter and smartphone-based colorimetric quantification. Streptavidin-Cu3(PO4)2 hybrid nanoflowers (SA-Cu3(PO4)2 HNFs) were synthesised and then conjugated with biotinylated invertase as a signal probe. The electrochemical signal was achieved via intrinsic redox activity. Simultaneously, sucrose could be converted to glucose by the action of invertase, which can cause changes in the glucosemeter signal as well as in the colour of urine glucose test strips. The glucosemeter could complete the signal response in 7 s, and the urine glucose test strips could complete the colour development in 30 s. The detection range of AFB1 by this system in electrochemical mode is 0.001–100 ng/mL, and in glucosemeter mode and smartphone mode is 0.01–50 ng/mL. The limits of detection were 0.49 pg/mL in electrochemistry mode, 5.4 pg/mL in glucosemeter mode and 3.7 pg/mL in smartphone mode. SignificanceThe successful construction of this multi-mode biosensor demonstrates the advantages of multifunctional nanomaterials and mobile technology. Rapid and accurate detection of AFB1 is achieved through the integration of electrochemistry, glucosemeter and smartphone-based colorimetric quantification. And this biosensor provides a novel detection platform that combines sensitivity, accuracy, affordability and portability for rapid on-site food safety screening.

Imprints of Soil Microbial Activity Accredited to Residue-Management and Tillage Practices for Boosting Rice and Wheat Production

The sustainable productivity of rice–wheat cropping systems relies on soil health, and soil health can be positively influenced by treating previous crop residues using conservation tillage practices. The present study examined the impact of three rice residue-management practices under zero-tilled wheat (ZTW) and conventionally tilled wheat (CTW), along with two rice-sowing practices, during rice cultivation on soil functional microbial diversity, physiological profiling, and grain yields of rice and wheat. Anchored residues (ARs) under ZTW exhibited significantly (p ≤ 0.05) high average well color development—31.43% more than CTW with no residue (NR). CTW with residue burning (BUR) showed a 5.42% increase in the Shannon diversity index compared to CTW-NR. Substrate richness was 10.02% higher in CTW-BUR compared to CTW-NR. CTW-BUR demonstrated the highest 17.98% increase in the Shannon evenness index compared to CTW-NR. The direct-seeded rice (DSR) system generally surpassed puddled transplanted rice (PTR) in most indices, except for the Shannon evenness index values. ZTW-AR exhibited the highest utilization of amino acids, carboxylic acids, and phenolic compounds, while CTW-BUR exhibited the highest utilization of carbohydrates and polymers utilization, and ZTW with no-residue (NR) exhibited the highest utilization of amines. Rice and wheat grain yields were highest with full residue in ZTW and lowest in CTW-NR. PTR supported higher rice yields, while DSR was superior for wheat. These findings highlight the favorable role of residue retention with no tillage during wheat cultivation in the maintenance of soil quality and rice–wheat productivity.

A Simple Production Process for Prolonging the Microbiological Shelf-Life and Improving the Sensorial Quality of Refrigerated Shucked Mussel (Mytilus galloprovincialis) Products Marketed in Greece

ABSTRACT Commercial production of refrigerated shucked mussels (SM) in Greece presents several challenges that are associated with short shelf-life, lack of taste and development of brown color in the filling medium. To overcome these problems an alternative mussel body recovery process in combination with different filling media, namely brines and white vinegar solutions of various concentrations, was used for the production of SM. A 2-fold to 5-fold increase in the shelf-life of the various SM products was observed when compared against control, while significant improvements were also found in both taste and visual appearance of the products.

D-Band-Center-Engineered Platinum-Based Nanozyme for Personalized Pharmacovigilance.

A high-efficiency PtZnCd nanozyme was screened with density functional theory (DFT) and unique d-orbital coupling features for sensitive enrichment and real-time analysis of CO-releasing molecule-3 (CORM-3). Multicatalytic sites in the nanozyme showed a high reactivity of up to 72.89 min-1 for peroxidase (POD)-like reaction, which was 2.2, 4.07, and 14.67 times higher than that of PtZn (32.67 min-1), PtCd (17.89 min-1), and Pt (4.97 min-1), respectively. Normalization of the catalytic sites showed that the catalytic capacity of the active site in PtZnCd was 2.962 U μmol-1, which was four times higher than that of a pure Pt site (0.733 U μmol-1). DFT calculations showed that improved d-orbital coupling between different metals reduces the position of the center of the shifted whole d-band relative to the Fermi energy level, thereby increasing the contribution of the sites to the electron transfer from the active center, accompanied by enhanced substrate adsorption and intermediate conversion in the catalytic process. The potential adsorption principle and color development mechanism of CORM-3 on PtZnCd were determined, and its practical application in drug metabolism was validated in vitro and in zebrafish and mice models, demonstrating that transition-metal doping effectively engineers high-performance nanozymes and optimizes artificial enzymes.

A Molecular Approach to Understand the Involvement of Mycoplasma in Suppurative Otitis Cases of Cattle in Chittoor District of Andhra Pradesh

In bovines the economic losses mainly due to the outbreak of diseases, leads to mortality, morbidity, treatment cost and reduced production. Recently in August month of 2024, received 13 bovine suppurativeotitis samples from outbreak in KuppamMandal of Chittoor district. The history having the purulent discharges with foul smell from ear infections of cattle that to crossbreed cattle of all age groups are affected. After 5 days of appearing aural discharges the animals were also shown the nervous signs, head tilting and other clinical findings includes unilateral or bilateral ear droop, epiphora, ptosis, abnormal nystagmus, strabismus, regurgitation, stiff neck, opisthotonus, facial hyperesthesia, purulent aural discharge, nasopharyngeal collapse, recumbency and finally death were noticed in severely affected animals. All the samples were processed for cultural tests by inoculating in PPLO selective broth and selective media PPLO agar then incubated anaerobically at 370C and observed the color development in broth pink to yellow color after 3- 5 days of incubation indicative of positive growth and fried egg micro colonies on selective PPLO agar media after 8-14 days of incubation observed under low power and 40X. The DNA was isolated from all the samples and screened for presence of Mycoplasma by targeting 16s rRNA gene and found that out of 13 samples 10 were positive for genus Mycoplasma and produced the predicted 280bp size product in all positive samples. The suppurativeotitis in cattle usually is caused by Actinomyces spp., Corynebacterium pseudotuberculosis, E. coli, Heamophilus, P.multocida, Pseudomonas spp, Streptococcus spp., and Mycoplasma bovis. This study was targeted only the emerging pathogen i.e the cellwall deficient bacteria Mycoplasma because of infections is hampered by a lack of effective vaccines and specific treatments, leads to increasing trends in antimicrobial resistance. Concluded that isolation and identification of the pathogenic ........

D‐Band‐Center‐Engineered Platinum‐Based Nanozyme for Personalized Pharmacovigilance

AbstractA high‐efficiency PtZnCd nanozyme was screened with density functional theory (DFT) and unique d‐orbital coupling features for sensitive enrichment and real‐time analysis of CO‐releasing molecule‐3 (CORM‐3). Multicatalytic sites in the nanozyme showed a high reactivity of up to 72.89 min−1 for peroxidase (POD)‐like reaction, which was 2.2, 4.07, and 14.67 times higher than that of PtZn (32.67 min−1), PtCd (17.89 min−1), and Pt (4.97 min−1), respectively. Normalization of the catalytic sites showed that the catalytic capacity of the active site in PtZnCd was 2.962 U μmol−1, which was four times higher than that of a pure Pt site (0.733 U μmol−1). DFT calculations showed that improved d‐orbital coupling between different metals reduces the position of the center of the shifted whole d‐band relative to the Fermi energy level, thereby increasing the contribution of the sites to the electron transfer from the active center, accompanied by enhanced substrate adsorption and intermediate conversion in the catalytic process. The potential adsorption principle and color development mechanism of CORM‐3 on PtZnCd were determined, and its practical application in drug metabolism was validated in vitro and in zebrafish and mice models, demonstrating that transition‐metal doping effectively engineers high‐performance nanozymes and optimizes artificial enzymes.

Effects of plastic film mulching on soil microbial carbon metabolic activity and functional diversity at different maize growth stages in cool, semi-arid regions.

Plastic film mulching has been widely used to enhance soil hydrothermal conditions and increase crop yields in cool, semi-arid areas. However, its impact on soil microbial carbon metabolic activity and functional diversity during plant growth remains unclear despite their important roles in nutrient cycling and soil quality evaluation. This study used the Biolog EcoPlate technique to investigate the dynamics and driving factors of soil microbial carbon metabolic activity and functional diversity at different maize growth stages following plastic film mulching. The results revealed that film mulching significantly increased microbial carbon metabolic activities [represented by average well color development (AWCD)] by 300% at the seedling stage and by 26.8% at maturity but decreased it by 47.4% at the flowering stage compared to the control (without mulching). A similar trend was observed for the microbial functional diversity index. Redundancy analysis identified soil moisture (SM), soil temperature (ST), dissolved organic carbon (DOC), microbial biomass carbon (MBC), and bacteria amounts as the primary factors influencing changes in soil microbial carbon source utilization. The mulch treatment significantly increased SM at all growth stages, while its warming effect disappeared at the flowering stage. Soil DOC, MBC, and bacterial populations were notably higher under mulching at the seedling and maturity stages but lower at the flowering stage. Pearson correlation analysis showed that changes in SM, ST, DOC, MBC, and bacterial populations positively correlated with the utilization of all carbon source classes, AWCD, and functional diversity indexes after film mulching. Furthermore, maize grain yield and water use efficiency increased by 142 and 129%, respectively, following film mulching. In conclusion, plastic film mulching enhanced soil microbial carbon metabolic activity and functional diversity at the seedling and maturity stages, improving crop yields in cool, semi-arid areas. Furthermore, the decrease in soil carbon metabolic capacity at flowering stage highlights that supplementing soil carbon sources should be considered after continuous film mulching to sustain or enhance farmland productivity and soil quality.

Identification of peripheral nerve functional fascicles in Sprague-Dawley rats by the carbon quantum dot-Annexin V antibody complex

To explore a method to identify the sensory and motor fascicles of the peripheral nerve to achieve accurate peripheral nerve functional fascicle suture. The peripheral nerve Sunderland V injury model, muscle branch of the femoral nerve and saphenous nerve were established in the bilateral femoral nerves of Sprague-Dawley (SD) rats. The specific samples were grouped as follows: the main trunk of the femoral nerve was exposed bilaterally and cut with microscopic scissors in the main trunk of the femoral nerve to prepare a model of Sunderland V injury in the mixed fascicle of peripheral nerves; the muscle branch of the femoral nerve was exposed bilaterally and cut in the middle section of the muscle branch of the femoral nerve to prepare a model of Sunderland V injury in the motor fascicle of peripheral nerves; the saphenous nerve was exposed bilaterally and cut at 1 cm below the patella to prepare a model of Sunderland V injury to the sensory fascicle of the peripheral nerves. A carbon quantum dot (CD)-annexin V antibody complex was prepared and applied to the distal and proximal nerve stumps of the peripheral nerve Sunderland V injury model groups of SD rats. Under the excitation light source of a 380 nm uv lamp, fluorescence color development was observed under a fluorescence microscope after 5, 10, 15, and 20 min. At 5 min, sections of the bilateral femoral nerve trunk, muscular branches of the femoral nerve, and Sunderland V lesion of the saphenous nerve in SD rats were only dark in color under the microscope, and there was no difference in fluorescence. The intensity of the staining increased significantly for 10–20 min. The sensory fascicles and saphenous nerves of the femoral nerve trunk showed blue fluorescence under the CD-Annexin V antibody complex staining, while the motor fascicles and muscle branches of the femoral nerve trunk showed no fluorescence. Fluorescence intensity gradually decreased after 20 min of staining. There was no significant difference in the staining intensity at 5, 10, 15, and 20 min in each group. Our results suggest that the CD-Annexin antibody complex can be used to identify functional fascicles of peripheral nerves in SD rats.

2D Fe/Co-MOF/SOX cascade reactors for fast noninvasive detection of sarcosine level in prostate cancer urine

Sarcosine plays a key role in screening for early prostate cancer. However, the several already reported peroxidase mimics immobilized with sarcosine oxidase (SOX) utilized to detect uriary sarcosine still have some limitations such as complex synthesis process, using of expensive heavy metals to mimic enzyme activity and long color development time. Herein, an inexpensive peroxidase-like 2D Fe/Co-MOF nanosheet was prepared by a simple solvent modulation method. The resultant 2D Fe/Co-MOF nanosheets have strong peroxidase activity, with its Vmax value for H2O2 of 15.3 × 10-8 M/s, being 1.76 times that of HRP. Then, using the 2D Fe/Co-MOF as a peroxidase model for anchoring natural SOX to construct 2D Fe/Co-MOF/SOX , which can act as a cascade reactor for detection of sarcosine. Considering the above properties, a platform for the detection of sarcosine was built based on a colorimetric method. Because of presence of the high ratio of Fe2+ caused by the electron transfer from Co2+ to Fe3+, large specific surface area and plentiful active sites, 2D Fe/Co-MOF/SOX with TMB (3,3′,5,5′-tetramethylbenzidine) colorimetric reagent could have fast color development and can be applied conveniently and fastly in an early screening tool for prostate cancer patients. The sarcosine could be quantified by peroxidase activity with a detection range of 1–400 μM and a limit of detection (LOD) of 0.324 μM. More importantly, the average sarcosine concentration of 21.367 μM and 1.871 μM was detected in patient’s and normal urine (n = 5), respectively, which showed an excellent screening effect and a great potential in early prostate cancer.

Utilization of Tea Polyphenols as Color Developers in Reversible Thermochromic Dyes for Thermosensitive Color Change and Enhanced Functionality of Polyester Fabrics

Thermochromic textiles possess the capability to indicate ambient temperature through color changes, enabling real-time temperature monitoring and providing temperature warnings for body heat management. In this study, three thermochromic dyes—blue, red, and yellow—were synthesized using crystalline violet lactone (CVL), 6′-(diethylamino)-1′,3′-dimethyl-fluoran (DDF), and 3′,6′-dimethoxyfluoran (DOF) as leuco dyes, respectively, with biomass tea polyphenol serving as the color developer and tetradecanol as the phase change material. The chemical structures of these dyes were characterized using UV spectroscopy, infrared spectroscopy, Raman spectroscopy and 1H NMR. The thermochromic mechanisms were investigated, revealing that the binding bonds between the leuco dyes and the color developer broke and reorganized with temperature changes, imparting reversible thermochromic property. Polyester fabrics were dyed using an impregnation method to produce three reversible thermochromic fabrics in blue, red, and yellow. The structure and properties of these fabrics were analyzed, showing a significant increase in the UPF value from 26.3 to approximately 100, indicating enhanced UV resistance. Water contact angle measurements revealed that the contact angle of undyed polyester fabrics was 139°, while that of dyed polyester fabrics decreased by about 40°, indicating improved hydrophilicity. Additionally, the fabric inductive static tester showed that the static voltage half-life of dyed polyester fabric was less than 1 s, demonstrating a significant antistatic effect. Infrared thermal imaging results indicated that during the warming and cooling process, the thermochromic polyester fabric exhibited specific energy storage and insulation effects at 38 °C, close to the human body temperature. This study presented a novel approach to developing smart color-changing textiles using biomass-derived thermochromic dyes, offering diverse materials for personal thermal management, and intelligent insulation applications.

Mining and expression analysis of color related genes in Bougainvillea glabra bracts based on transcriptome sequencing.

Bract coloration is one of the key ornamental traits in Bougainvillea, yet research has predominantly focused on phenotypic color traits and pigment composition, with limited understanding of the molecular mechanisms underlying color formation. This gap hinders the improvement and innovation in bract coloration. To elucidate the regulatory mechanisms of bract coloration in Bougainvillea and to enhance the utilization of its germplasm resources, this study employed the Illumina Novaseq 6000 sequencing platform to conduct transcriptomic sequencing on 21 samples of bracts exhibiting seven distinct phenotypes. Comparative analysis against Nr, Pfam, EggNOG, GO, and KEGG databases annotated 90,279 unigenes. The highest annotation rates were achieved with the Nr (40.13%), GO (30.44%), and EggNOG (25.64%) databases. Among the species annotated, Beta vulgaris (20.08%) and Chenopodium quinoa (14.58%) shared the highest homology with Bougainvillea bract transcriptomes. WGCNA analysis identified 12 positively correlated tissue-specific modules, of which 2 are related to bract color formation. By comparing transcriptome data and genes within these specific modules against the KEGG database, a total of 321 unigenes associated with bract color formation in Bougainvillea were discovered. Among these, 220 unigenes are involved in anthocyanin synthesis, 43 unigenes are involved in betalain synthesis, 23 unigenes are annotated as Chlorophyll a-b binding protein genes, and 35 unigenes participate in carotenoid synthesis. Quantitative real-time PCR (qRT-PCR) validation of 16 differentially expressed genes (DEGs) including PAL2, CHS1, ANS, BZ1, 6GT, CDOPA5GT, ANR, CHS2, and DOPA, revealed significant expression differences among magenta, yellow, white, and cherry-colored bracts, suggesting their potential as candidate genes for bract color development. This study not only enriches the transcriptomic data of Bougainvillea but also identifies genes associated with bract coloration, providing a valuable theoretical basis for future gene cloning, genetic engineering, and breeding efforts in Bougainvillea.

In vitro cytotoxicity assessment of biosynthesized Apis mellifera bee venom nanoparticles (BVNPs) against MCF-7 breast cancer cell lines

In this work, we reported the synthesis of honey bee (Apis mellifera) venom-derived nanoparticles via a hydrothermal method. This method not only ensures the preservation of the bee venom’s bioactive components but also enhances their potential stability, thus broadening the scope for their applications in the biomedicinal field. The synthesis method started with the homogenization suspension of bee venom, followed by its hydrothermal process to synthesize bee venom nanoparticles (BVNPs). The successful synthesis of BVNPs was characterized using various characteristic techniques such as Ultraviolet–visible (UV–Vis) spectroscopy, Fourier Transforms Infrared (FTIR) Spectroscopy, Zeta Potential (ZP), Liquid Chromatography-Mass Spectrometry (LCMS), and Transmission Electron Microscopy (TEM). The synthesis of BVNPs through biosynthesis is shown by the visible violet-brown color development at 347 nm by UV–Vis spectroscopy. FTIR analysis revealed the presence of several functional groups in the BVNPs, including alcohols (–OH), phenols (C6H5–), carboxylic acids (–COOH), amines (–NH2, –NH–), aldehydes (–CHO), ketones (–CO–), nitriles (–CN), amides (–CO–N–), imines (–CNH–), esters (–COO–), and polysaccharides. These functional groups, as confirmed by their specific stretching and bending vibrational modes, contribute to the diverse biological activities of BVNPs, including cytotoxicity against MCF-7 breast cancer cells. The ZP of the BVNPs indicated good colloidal stability at − 45 mV. LCMS analysis confirmed the presence of major bioactive molecules, including melittin & apamin and TEM analysis shows the BVNPs exhibited a quasi-spherical shape with good dispersion, the average size was approximately 25 nm, with some being smaller (quantum dots) and interplanar spacing of 0.236 nm indicated a highly ordered crystalline structure. Moreover, the anticancer efficacy of the BVNPs was ascertained through in vitro assays against MCF-7 breast cancer cells, showing a dose-dependent cytotoxic effect. The findings of this study underscore the viability of hydrothermal synthesis in producing biologically active and structurally stable BVNPs, with a significant potential for anticancer activities.Graphical

3D printing cassava starch-ovalbumin intelligent labels: Co-pigmentation effects of gallic acid on anthocyanins

Anthocyanins are often chosen as signal converters of intelligent labels. However, they are degraded by high-temperature oxidation in the process of intelligent label preparation. The color fading seriously affects the sensitivity of color development. In this study, a green 3D printing intelligent label preparation technique was developed, in which gallic acid (GA) was added to a blueberry anthocyanin (BA) solution to enhance the color of the co-pigment to ensure the color sensitivity. The combined effect of GA-BA reduced the fade rate of the anthocyanins from 35.13 % to 26.44 % at 90 °C. The printing ink has shear-thinning viscosity characteristics and yield stresses in the range of 500–600 MPa for high-quality printing. Structural analysis revealed that GA-BA co-pigmentation enhanced the interaction between ovalbumin and cassava starch. In addition, the method of 3D printing to prepare labels was conducive to solving the problem of waste in traditional labeling process. The results of freshness testing of sea shrimp proved that labels can be applied to fresh boxes to reflect the freshness of food. We provide a method for enhancing the color of 3D-printed smart ink to prepare intelligent labels with reproducible and customizable batch shapes.

The application of Xinjiang safflower extract on Aidelaisi silk fabric

Purpose This study aims to explore the traditional plant dyeing of Xinjiang Atlas silk fabrics, providing references for the comprehensive utilization of plant dyes in intangible cultural heritage.Design/methodology/approach The focus of this study is on dyeing experiments of Atlas silk fabrics using safflower extracts, constrained by regional resources. Safflower dry flowers grown in Xinjiang were selected, rinsed with pure water and rubbed. Yellow pigments were removed by adding edible white vinegar. Red pigments from safflower were extracted using an alkaline solution prepared with Populus euphratica ash, a special product of Xinjiang. The extraction rate was analyzed under varying material-to-liquor ratios, pH values, times and temperatures. Direct dyeing process experiments were conducted to obtain different colorimetric L, a, b and K/S values for comparison. Samples with good color development were selected to test the impact of dyeing immersions on color development, and their color fastness, UV protection and antibacterial effects were verified.FindingsThe dyeing experiments on silk fabrics confirmed their UV protection capabilities and antibacterial properties, demonstrating effectiveness against E. coli and Staphylococcus aureus. As a major producer of safflower, Xinjiang underscores the significance of safflower as an essential plant dyes on the Silk Road. This study reveals its market potential and suitability for use in the plant dyeing process of Atlas silk, producing vibrant red and pink colors.Originality/valueThe experiments indicated that after removing yellow pigments, the highest extraction rate of red pigment from safflower was achieved at a pH value of 10–11, a temperature of 30°C and an extraction time of 40 min. The best bright red color effect with strong color fastness was obtained with a material-to-liquor ratio of 1:20, a temperature of 40°C and three immersions. The best light pink color effect with strong color fastness was a material-to-liquor ratio of 1:80, a temperature of 30°C and two immersions.

Construction of Ion-Imprinted Graphene Oxide Mixed-Matrix Membranes for Selective Adsorption and Separation of Tm3.

Efficient adsorption and separation of rare earth from other similar rare earth wastewater has become an urgent demand for resource utilization of ion-type rare earth minerals in China. Herein, thulium (Tm) ion-imprinted graphene oxide (GO)-doped polyether sulfone (PES) membranes (GO-TII/PES-2 membranes) were prepared, in which ion-imprinted graphene oxide was applied as an efficient Tm3+ ionic ligand in the imprinted layer and polyether sulfone was applied as a carrier in the membrane matrix to achieve the selective adsorption and separation of Tm3+ and neighboring rare earth ions. Combined with an ion rectifier, the separation and purification performances of Tm3+ were explored. The separation factors β(Tm3+/Tb3+), β(Tm3+/Sm3+), β(Tm3+/Nd3+), and β(Tm3+/Ce3+) in the dynamic adsorption process increased significantly from 1.22, 1.04, 1.04, and 1.02 for nonimprinting to 3.07, 3.91, 3.91, and 3.33 for imprinted membranes. The GO-TII/PES-2 membrane adsorbed about three times more Tm3+ than the nonionic-imprinted (GO-NII/PES) membrane by adding a color developer and quantifying Tm3+ based on a fast and easy UV-photometric method. After eight dynamic permeations, the adsorption of Tm3+ by the GO-TII/PES-2 membrane decreased by only 13%, indicating that the membrane has good reuse performance. Additionally, the investigation examined the influence of Tm3+ on wheat seed germination, underscoring its potential application in agriculture and the importance of adsorbing and separating rare earth ions.

Rapid screening of prednisolone acetate adulterants in health foods using colloidal gold immunochromatographic assay

In this study, a rapid detection method utilizing colloidal gold immunochromatography (CG-ICA) was developed for the detection of illegally added prednisone acetate in health foods. Initially, the preparation conditions of colloidal gold solution were optimized. The optimal potassium carbonate dosage, antibody diluent type, antibody dosage, probe labeling time, blocking time and BSA dosage were determined. Technical analysis was performed to ensure that the established CG-ICA exhibited satisfactory color development and inhibition rates. Under optimized conditions, the cut-off value of CG-ICA was 250 μg/kg. The assay demonstrated a sensitivity of 100 %, a false positive rate of 8 %, and a false negative rate of 0, indicating high specificity for prednisone acetate. The results obtained from testing actual samples were consistent with those obtained using LC-MS/MS, thereby verifying the reliability of the developed method. This method offers robust support for the rapid detection of illegally added prednisone acetate in health foods.

Drivers of continuous colour variation in the Madeiran wall lizard (Teira dugesii)

Abstract Animal coloration is often shaped by a myriad of factors that lead to differences in colour through changes in the chromatophores. Depending on how this variation is partitioned, coloration is often categorized as continuous or polymorphic. However, the boundaries between these two categories are not always clear. Here, we investigated whether the ventral coloration of the Madeiran wall lizard (Teira dugesii) varies continuously or corresponds to discrete colour morphs, via by-eye colour classification and visual modelling. By combining these two approaches, we show that T. dugesii coloration varies continuously and that colour classifications based on anthropomorphic approaches alone are ill suited to describe animal coloration. We also tested the influence of size, body condition, and sex as possible factors that might explain differences in T. dugesii coloration. We found that body condition, and especially size and sex, explain a great proportion of the variability observed in this species. These differences point to an effect of ontogeny, which might play a major role in colour development owing to the longevity of this species. Moreover, the sexual dichromatism that this species shows is indicative of an effect of sexual selection on coloration, perhaps explained by differences in circulating hormones.