Collision-induced Dissociation Reactions Research Articles

Reactions of gas-phase uranyl formate/acetate anions: reduction of carboxylate ligands to aldehydes by intra-complex hydride attack.

In a previous study, electrospray ionization, collision-induced dissociation (CID), and gas-phase ion-molecule reactions were used to create and characterize ions derived from homogeneous precursors composed of a uranyl cation (UVIO22+) coordinated by either formate or acetate ligands [E. Perez, C. Hanley, S. Koehler, J. Pestok, N. Polonsky and M. Van Stipdonk, Gas phase reactions of ions derived from anionic uranyl formate and uranyl acetate complexes, J. Am. Soc. Mass Spectrom., 2016, 27, 1989-1998]. Here, we describe a follow-up study of anionic complexes that contain a mix of formate and acetate ligands, namely [UO2(O2C-CH3)2(O2C-H)]- and [UO2(O2C-CH3)(O2C-H)2]-. Initial CID of either anion causes decarboxylation of a formate ligand to create carboxylate-coordinated U-hydride product ions. Subsequent CID of the hydride species causes elimination of acetaldehyde or formaldehyde, consistent with reactions that include intra-complex hydride attack upon bound acetate or formate ligands, respectively. Density functional theory (DFT) calculations reproduce the experimental observations, including the favored elimination of formaldehyde over acetaldehyde by hydride attack during CID of [UO2(H)(O2C-CH3)(O2C-H)]-. We also discovered that MSn CID of the acetate-formate complexes leads to generation of the oxyl-methide species, [UO2(O)(CH3)]-, which reacts with H2O to generate [UO2(O)(OH)]-. DFT calculations support the observation that formation of [UO2(O)(OH)]- by elimination of CH4 is favored over H2O addition and rearrangement to create [UO2(OH)2(CH3)]-.

Probing radical versus proton migration in the aniline cation with IRMPD spectroscopy

Intramolecular radical and proton migration in the gas phase are important processes driving the dissociation reactions underlying common tandem mass spectrometry processes, such as collision-induced and electron-induced dissociation reactions (CID and ExD). Mechanistic insights in these processes requires experiments that probe the molecular structures of ions along the reaction pathways, usually combined with quantum-chemical calculations. The combination of ion trap mass spectrometry with IR laser spectroscopy, pioneered among others by Dieter Gerlich, provides a particularly effective method to explore details of the ion structures. In this work, we employ infrared multiple-photon dissociation (IRMPD) spectroscopy and density functional theory (DFT) calculations to probe the reactant and product ion structures of a homolytic bond cleavage reaction. First, we employ IRMPD spectroscopy to establish that protonation of the 4-bromoaniline precursor occurs on the amine moiety and then that C-Br homolytic cleavage produces the π-radical cation of aniline. Transition-state calculations are performed to compare the various pathways that connect reactant and product ions, including both proton and radical transfer mechanisms.

Dissociation cross sections and rates in O2 + N collisions: molecular dynamics simulations combined with machine learning.

The collision-induced dissociation reaction of O2 (v, j) + N, a fundamental process in nonequilibrium air flows around reentry vehicles, has been studied systematically by applying molecular dynamics simulations on the 2A', 4A' and 6A' potential energy surfaces of NO2 in a wide temperature range. In particular, we have directly investigated the role of the 6A' surface in this process and discussed the applicability of the simplified approximate rate models proposed by Esposito et al. and Andrienko et al. based on the lowest two surfaces. The present work indicates that the state-selected dissociation of O2 + N is dominated by the 6A' surface for all except for the low-lying O2 states. Furthermore, a complete database of rovibrationally detailed cross sections and rate coefficients is a prerequisite for modeling the relevant nonequilibrium air flows in spacecraft reentry. Here, the combination of the quasi-classical trajectory (QCT) and the neural network (NN) has been proposed to predict all state-selected dissociation cross sections and further construct dissociation parameter sets. All NN-based models established in this work accurately reproduce the results calculated from QCT simulations over a wide range of rovibrational quantum numbers with R2 > 0.99. Compared with the explicit QCT simulations, the computational requirement for predicting cross sections and rates based on the NN models significantly reduces. Finally, thermal equilibrium rate coefficients computed from NN models match remarkably well the available theoretical and experimental results in the whole temperature range explored.

Holmium (Ho) oxide, carbide, and dioxide cation bond energies and evaluation of the Ho + O → HoO+ + e- chemi-ionization reaction enthalpy.

Guided ion beam tandem mass spectrometry (GIBMS) and quantum chemical calculations are employed to evaluate the title chemi-ionization reaction with holmium. Exchange reactions of Ho+ with O2, CO, and SO2 and HoO+ with CO, as well as collision-induced dissociation (CID) reactions of HoO+ with Xe, O2, and CO, were performed using GIBMS. Formation of HoO+ is exothermic in reactions with O2 and SO2 but endothermic for reaction with CO, as is the exchange reaction of HoO+ with CO. Quantitative analysis of these reactions and the three CID reactions provides a robust method to determine the bond dissociation energy (BDE) of Ho+-O, 6.02 ± 0.13eV. BDEs for Ho+-C and OHo+-O are also measured as 2.27 ± 0.19 and 2.70 ± 0.27eV, respectively. All three measurements are the first direct determinations of these BDEs. By combining the BDE of HoO+ with the well-established ionization energy of Ho, the exothermicity of Ho in the title chemi-ionization reaction can also be obtained as 0.00 ± 0.13eV. All experimental thermochemistry was then compared to quantum chemical calculations for the purpose of establishing benchmarks and validation. BDEs determined via these calculations are in agreement with the experiment within the inherent experimental and theoretical uncertainties, with results obtained at the coupled-cluster with single, double, and perturbative triple excitations, CCSD(T), using all-electron basis sets yielding the most accurate results.

Creation of [OUF]+ using gas-phase reactions of [UO2(C6F5)

While the strong axial UO bonds confer high stability and inertness to UO22+, it has been shown that the axial oxo ligands can be eliminated or replaced in the gas-phase using collision-induced dissociation (CID) reactions. In this study, CID of the pentafluorobenzoate precursor ion [UO2(O2C–C6F5)]+ was used to produce the organo-uranyl ion [UO2(C6F5)]+ by decarboxylation. Subsequent CID of [UO2(C6F5)]+ created [UO2(F)]+ by fluoride transfer and elimination of C6F4, rather than UO2+ by elimination of pentafluorophenyl radical (as has been observed for similar species). Moreover, upon reaction of [UO2(C6F5)]+ with H2O, apparent substitution of OH for F to create [UO3HC6F4]+ is favored over hydrolysis to produce [UO2(OH)]+ and (neutral) C6F5H. Subsequent CID of [UO3HC6F4]+ generates [UO2(F)]+ and [OUF]+. When [OUF]+ is isolated to react with H2O and O2 in the ion trap, the principal product ions observed are [UO2(F)]+ and [UO2(OH)]+. Experiments conducted with labeled reagent suggest that reaction with H218O leads to exchange of the oxo ligand and incorporation of the 18O label into [OUF]+ while reaction with O2 likely creates [UO2(F)]+. Formation of [UO2(OH)]+ from [OUF]+ is the result of a cascade of reactions, with initial formation of [UO2(F)]+ by reaction with O2, followed by hydrolysis to create the hydroxide species.

Destruction and reconstruction of UO22+ using gas-phase reactions.

While the strong axial U[double bond, length as m-dash]O bonds confer high stability and inertness to UO22+, it has been shown that the axial oxo ligands can be eliminated or replaced in the gas-phase using collision-induced dissociation (CID) reactions. We report here tandem mass spectrometry experiments initiated with a gas-phase complex that includes UO22+ coordinated by a 2,6-difluorobenzoate ligand. After decarboxylation to form a difluorophenide coordinated uranyl ion, [UO2(C6F2H3)]+, CID causes elimination of CO, and then CO and C2H2 in sequential dissociation steps, to leave a reactive uranium fluoride ion, [UF2(C2H)]+. Reaction of [UF2(C2H)]+ with CH3OH creates [UF2(OCH3)]+, [UF(OCH3)2]+ and [UF(OCH3)2(CH3OH)]+. Cleavage of C-O bonds within these species results in the elimination of methyl cation (CH3+). Subsequent CID steps convert [UF(OCH3)2]+ to [UO2(F)]+ and similarly, [U(OCH3)3]+ to [UO2(OCH3)]+. Our experiments show removal of both uranyl oxo ligands in "top-down" CID reactions and replacement in "bottom-up" ion-molecule and dissociation steps.

Experimental and theoretical assessment of protonated Hoogsteen 9-methylguanine-1-methylcytosine base-pair dissociation: kinetics within a statistical reaction framework.

We investigated the collision-induced dissociation (CID) reactions of a protonated Hoogsteen 9-methylguanine-1-methylcytosine base pair (HG-[9MG·1MC + H]+), which aims to address the mystery of the literature reported "anomaly" in product ion distributions and compare the kinetics of a Hoogsteen base pair with its Watson-Crick isomer WC-[9MG·1MC + H]+ (reported recently by Sun et al.; Phys. Chem. Chem. Phys., 2020, 22, 24986). Product ion cross sections and branching ratios were measured as a function of center-of-mass collision energy using guided-ion beam tandem mass spectrometry, from which base-pair dissociation energies were determined. Product structures and energetics were assessed using various theories, of which the composite DLPNO-CCSD(T)/aug-cc-pVTZ//ωB97XD/6-311++G(d,p) was adopted as the best-performing method for constructing a reaction potential energy surface. The statistical Rice-Ramsperger-Kassel-Marcus theory was found to provide a useful framework for rationalizing the dominating abundance of [1MC + H]+ over [9MG + H]+ in the fragment ions of HG-[9MG·1MC + H]+. The kinetics analysis proved the necessity for incorporating into kinetics modeling not only the static properties of reaction minima and transition states but more importantly, the kinetics of individual base-pair conformers that have formed in collisional activation. The analysis also pinpointed the origin of the statistical kinetics of HG-[9MG·1MC + H]+vs. the non-statistical behavior of WC-[9MG·1MC + H]+ in terms of their distinctively different intra-base-pair hydrogen-bonds and consequently the absence of proton transfer between the N1 position of 9MG and the N3' of 1MC in the Hoogsteen base pair. Finally, the Hoogsteen base pair was examined in the presence of a water ligand, i.e., HG-[9MG·1MC + H]+·H2O. Besides the same type of base-pair dissociation as detected in dry HG-[9MG·1MC + H]+, secondary methanol elimination was observed via the SN2 reaction of water with nucleobase methyl groups.

Differentiation of Positional Isomers of Halogenated Benzoylindole Synthetic Cannabinoid Derivatives in Serum by Hybrid Quadrupole/Orbitrap Mass Spectrometry.

Legally regulated synthetic cannabinoids (SCs) are continuously being created by making minor positional modifications to pre-existing analogs; thus, compounds with minor structural differences must be isolated and identified accurately. For iodo-benzoylindole derivatives of SCs, only specific isomers are currently the target of legal control, and it is necessary to establish an analytical method for accurately identifying positional isomers. In this study, we synthesized a series of 57 designer drugs and developed a screening method for identifying halogen positional isomers on the phenyl ring of benzoylindole derivative SCs in serum. Analytical methods using the Discovery F5 pentafluorophenyl column gave the best selectivity and retention of the positional isomer analytes. Some of the meta and para iodo-substituted SCs were eluted at similar retention times and were difficult to separate by liquid chromatography (LC). However, they were identified via the relative abundance of the two product ions in the collision-induced dissociation reaction using LC-hybrid quadrupole/orbitrap high-resolution mass spectrometry. Our synthesized halogen-substituted positional isomer SC library and method for differentiating positional isomers of halogenated benzoylindole SC derivatives could provide an indispensable analysis tool for identifying illegal drugs in serum of drug users.

Gas-phase studies of copper(I)-mediated CO2 extrusion followed by insertion of the heterocumulenes CS2 or phenylisocyanate.

The gas-phase extrusion-insertion reactions of the copper complex [bathophenanthroline (Bphen)CuI (O2 CC6 H5 )]2- , generated via electrospray ionization, was studied in a linear ion trap mass spectrometer with the combination of collision-induced dissociation (CID) and ion-molecule reaction (IMR) events. Multistage mass spectrometry (MSn ) experiments and density functional theory (DFT) demonstrated that extrusion of carbon dioxide from [(Bphen)Cu(O2 CC6 H5 )]2- (CID) gives the organometallic intermediate [(Bphen)Cu(C6 H5 )]2- , which subsequently reacts with carbon disulfide (IMR) via insertion to yield [(Bphen)Cu (SC(S)C6 H5 )]2- . The fragmentation of the product ion resulted in the formation of [Bphen]2- , [(Bphen)Cu]- and C6 H5 CS2 - under CID conditions. The formation of the latter two charge separation products thus provides evidence of C-C bond formation in the IMR step. Although analogous studies with isocyanate, which is isoelectronic with CS2 , showed a poor reactivity in the gas phase, the mechanistic understanding obtained from these model studies encourages future development of a solution phase protocol for the synthesis of amides from carboxylic acids and isocyanates mediated by copper(I) complexes.

GC–MS/MS quantification of benzyl salicylate on skin and hair: A novel chemical simulant for human decontamination studies

Human studies investigating the efficacy of emergency decontamination protocols for chemical incidents require the use of non-hazardous chemical simulants. Methyl salicylate (MeS) has almost exclusively been used for this purpose. Whilst MeS is a simulant of the chemical warfare agent (CWA) sulphur mustard, it is not an ideal simulant for many other chemical threats with greater persistence and lower volatility. Benzyl salicylate (BeS) has been investigated here as a low toxicity simulant for lower volatility, persistent chemical threat agents and toxic industrial chemicals (TICs). To evaluate the suitability of BeS as a simulant for human decontamination studies a gas chromatography-triple quadrupole mass spectrometry method was designed, optimised and validated, for the analysis of human skin and hair. Quantification was achieved using isotope-dilution, EI and collision-induced dissociation and multiple reaction monitoring for both qualifier and quantifier ion transitions. The mass transitions were m/z 285 → 91 and m/z 210 → 181, respectively for the quantifier and qualifier ions of BeS, and m/z 289 → 91 and m/z 214 → 185 for the quantifier and qualifier ions for the BeS-d4 internal standard, respectively. The method exhibited excellent coefficients of determination (R2 = 0.9992–0.9999) with LOD and LOQ values at 0.023 ng/ml and 0.23 ng/ml. Across three Quality Controls (QCs), 11.5 ng/ml, 115 ng/ml and 1150 ng/ml) average accuracy (intra-day 95.6–100.3%, inter-day 98.5–104.91%) and precision (intra-day RSD (%) 2–13.7%, inter-day RSD (%) 3.3–8.8%) were determined. The validated method was applied in a proof of principle volunteer study for the determination of total BeS recovered from skin and hair. The average total BeS recovery after 70 min was 37.9% from skin and there was a significant increase between baseline and post-intervention levels for hair. These data demonstrate that BeS is an appropriate simulant for persistent chemicals and that the analytical method employed here is suitable for BeS analysis in human studies.

Mass Spectral Similarity Networking and Gas-Phase Fragmentation Reactions in the Structural Analysis of Flavonoid Glycoconjugates.

Flavonoids represent an important class of natural products with a central role in plant physiology and human health. Their accurate annotation using untargeted mass spectrometry analysis still relies on differentiating similar chemical scaffolds through spectral matching to reference library spectra. In this work, we combined molecular network analysis with rules for fragment reactions and chemotaxonomy to enhance the annotation of similar flavonoid glyconjugates. Molecular network topology progressively propagated the flavonoid chemical functionalization according to collision-induced dissociation (CID) reactions, as the following chemical attributes: aglycone nature, saccharide type and number, and presence of methoxy substituents. This structure-based distribution across the spectral networks revealed the chemical composition of flavonoids across intra- and interspecies and guided the putatively assignment of 64 isomers and isobars in the Chrysobalanaceae plant species, most of which are not accurately annotated by automated untargeted MS2 matching. These proof of concept results demonstrate how molecular networking progressively grouped structurally related molecules according to their product ion scans, abundances, and ratios. The approach can be extrapolated to other classes of metabolites sharing similar structures and diagnostic fragments from tandem mass spectrometry.

Gas-Phase Synthesis and Reactivity of Ligated Group 10 Ions in the Formal +1 Oxidation State.

Electrospray ionization of the group 10 complexes [(phen)M(O2CCH3)2] (phen=1,10-phenanthroline, M = Ni, Pd, Pt) generates the cations [(phen)M(O2CCH3)]+, whose gas-phase chemistry was studied using multistage mass spectrometry experiments in an ion trap mass spectrometer with the combination of collision-induced dissociation (CID) and ion-molecule reactions (IMR). Decarboxylation of [(phen)M(O2CCH3)]+ under CID conditions generates the organometallic cations [(phen)M(CH3)]+, which undergo bond homolysis upon a further stage of CID to generate the cations [(phen)M]+· in which the metal center is formally in the +1 oxidation state. In the case of [(phen)Pt(CH3)]+, the major product ion [(phen)H]+ was formed via loss of the metal carbene Pt=CH2. DFT calculated energetics for the competition between bond homolysis and M=CH2 loss are consistent with their experimentally observed branching ratios of 2% and 98% respectively. The IMR of [(phen)M]+· with O2, N2, H2O, acetone, and allyl iodide were examined. Adduct formation occurs for O2, N2, H2O, and acetone. Upon CID, all adducts fragment to regenerate [(phen)M]+·, except for [(phen)Pt(OC(CH3)2)]+·, which loses a methyl radical to form [(phen)Pt(OCCH3)]+ which upon a further stage of CID regenerates [(phen)Pt(CH3)]+ via CO loss. This closes a formal catalytic cycle for the decomposition of acetone into CO and two methyl radicals with [(phen)Pt]+· as catalyst. In the IMR of [(phen)M]+· with allyl iodide, formation of [(phen)M(CH2CHCH2)]+ was observed for all three metals, whereas for M = Pt also [(phen)Pt(I)]+ and [(phen)Pt(I)2(CH2CHCH2)]+ were observed. Finally, DFT calculated reaction energetics for all IMR reaction channels are consistent with the experimental observations.

Non-covalently bonded diastereomeric adducts of amino acids and (S)-1-phenylethanol in low-energy dissociative collisions

We have studied the collision induced dissociation reactions of proton-bound diastereomeric adducts of S-1-phenylethanol and enantiomers of three different amino acids (tryptophan, phenylalanine, methionine). In all cases, the loss of S-1-phenylethanol from the adduct ion is the only observed process, and the relative abundance is found to be independent of the chirality of the amino acid. This is in contrast to earlier experiments on the dissociation of protonated tryptophan–2-butanol adducts, where chirality affected the results. Results obtained from quantum chemical computations support and provide a rationale for the experimental observations and highlight temperature as a possible factor of importance for the chiral effect in these types of systems.

Gas-Phase Reactions of the Group 10 Organometallic Cations, [(phen)M(CH3)]+ with Acetone: Only Platinum Promotes a Catalytic Cycle via the Enolate [(phen)Pt(OC(CH2)CH3)]+

Abstract Electrospray ionisation of the ligated group 10 metal complexes [(phen)M(O2CCH3)2] (M = Ni, Pd, Pt) generates the cations [(phen)M(O2CCH3)]+, whose gas-phase chemistry was studied using multistage mass spectrometry experiments in an ion trap mass spectrometer with the combination of collision-induced dissociation (CID) and ion-molecule reactions (IMR). A new catalytic cycle has been discovered. In step 1, decarboxylation of [(phen)M(O2CCH3)]+ under CID conditions generates the organometallic cations [(phen)M(CH3)]+, which react with acetone to generate the [(phen)M(CH3)(OC(CH3)2)]+ adducts in competition with formation of the coordinated enolate for M = Pt (step 2). For M = Ni and Pd, the adducts regenerate [(phen)M(CH3)]+ upon CID. In the case of M = Pt, loss of methane is favored over loss of acetone and results in the formation of the enolate complex, [(phen)Pt(OC(CH2)CH3)]+. Upon further CID, both methane and CO loss can be observed resulting in the formation of the ketenyl and ethyl complexes [(phen)Pt(OCCH)]+ and [(phen)Pt(CH2CH3)]+ (step 3), respectively. In step 4, CID of [(phen)Pt(CH2CH3)]+ results in a beta-hydride elimination reaction to yield the hydride complex, [(phen)Pt(H)]+, which reacts with acetic acid to regenerate the acetate complex [(phen)Pt(O2CCH3)]+ and H2 in step 5. Thus, the catalytic cycle is formally closed, which corresponds to the decomposition of acetone and acetic acid into methane, CO, CO2, ethene and H2. All except the last step of the catalytic cycle are modelled using DFT calculations with optimizations of structures at the M06/SDD 6-31G(d) level of theory.

Routes for the gas-phase total synthesis of dihydroxy magnesium carboxylate anions, [(RCO2)Mg(OH)2]–(R = CH3 and CH3(CH2)14)

Dihydroxy magnesium carboxylates, [(RCO2)Mg(OH)2]–, a previously unknown class of compounds, have recently been discovered in meteorites using electrospray ionisation (ESI) ultra high-resolution mass spectrometry (HRMS) and collision-induced dissociation (CID) experiments (A. Ruf et al., Proc. Natl. Acad. Sci. U.S.A. 114 (2017) 2819). Here we present two general strategies for the gas-phase synthesis of [(RCO2)Mg(OH)2]– (where R = CH3 and CH3(CH2)14) in a linear quadrupole ion trap mass spectrometer using combinations of CID and ion-molecule reactions (IMR) with water. Both involve the same first step (Step 1), where [(RCO2)Mg(O2CCH3)2]– precursor ions generated via ESI are mass selected and subjected to decarboxylation. In Route I the resultant organomagnesate [(RCO2)Mg(CH3)(O2CCH3)]– is subjected to the following reactions: Step 2a involves decarboxylation via CID to give [(RCO2)Mg(CH3)2]– which undergoes an IMR in Step 3a to give [(RCO2)Mg(CH3)(OH)]–. For Route II [(RCO2)Mg(CH3)(O2CCH3)]– undergoes an IMR to give in Step 2b, [(RCO2)Mg(OH)(O2CCH3)]–, which in Step 3b fragments under CID to give [(RCO2)Mg(CH3)(OH)]–. Both routes converge in the final Step 4, where the organometallic ion [(RCO2)Mg(CH3)(OH)]– reacts with water to give the desired dihydroxy magnesium carboxylate, [(RCO2)Mg(OH)2]–. All ion molecule reactions proceed rapidly and cleanly to produce the hydroxides. In contrast, the decarboxylation reactions are in competition with other pathways including loss of the carboxylate anion and loss of a neutral ligand to give a magnesium coordinated enolate of acetate. DFT calculations were used to examine the structures and energies of species involved in the competing reactions associated with each of the steps.

Liquid chromatography–mass spectrometry studies on the isomeric 1-fluorobenzyl-3-naphthoyl-indoles: FUB-JWH-018 and five isomers

One of the ongoing research subjects for forensic analysts is differentiating halogen positional isomers of newly-emerging synthetic cannabinoids. The purpose of this study is to elucidate liquid chromatographic and mass spectrometric conditions applicable to the differentiation of such derivatives. High-performance liquid chromatography (HPLC) coupled with triple quadrupole mass spectrometry (QqQ-MS) and linear ion trap time-of-flight mass spectrometry (IT-TOF-MS) using electrospray ionization (ESI) in its positive ion mode were utilized to analyze six model compounds, FUB-JWH-018 and five positional isomers having structures of 1- or 2-naphthoyl-substituted 1H-indole-3-carboxylates with N-substituted positional isomeric fluorobenzyl groups (2-fluorobenzyl, 3-fluorobenzyl, and 4-fluorobenzyl). The chromatographic separation of the six isomers was successfully achieved by HPLC using a pentafluorophenylpropyl-bonded reversed-phase adsorbent. The positive ESI-QqQ-MS could discriminate fluorobenzyl isomers having a same naphthoyl structure via the relative abundance of the two product ions in the collision-induced dissociation reaction. ESI-IT-TOF-MS in its positive ion mode successfully distinguished three ring positional isomers in both naphthoyl scaffolds on the basis of the differences in the abundance of oxomethylium ion attributed to C16H11FNO+ (m/z 252). The use of ESI-QqQ-MS and ESI-IT-TOF-MS in its positive ion mode coupled with LC using a pentafluorophenylpropyl-bonded silica column is applicable to MS-aided differentiation and the chromatographic separation of FUB-JWH-018 positional isomers.

A Unique Collision-Induced Dissociation Reaction of Cholamine Derivatives of Certain Prostaglandins.

Prostaglandins (PGs) are biologically active metabolites of arachidonic acid containing 20 carbon atoms, a cyclic moiety, and two side chains (A and B) in common. The bioassay of PGs requires high sensitivity because of their low concentration in tissues and blood and has usually been carried out by electrospray ionization tandem mass spectrometry (ESI-MS/MS) in the negative ion mode. Chemical derivatization of PG carboxylic acid groups to introduce positive charge-carrying groups is an established strategy to improve the sensitivity and selectivity of such assays. In this study, we exploited this approach for structural identification of a series of PGs using cholamine derivatization through an amidation reaction. However, we observed that collision-induced dissociation of these derivatives gave rise to unexpected product ions that we postulated were formed by unique long-range intramolecular reactions resulting in dehydration of the B chain accompanied by fragmentation of the A chain through an unusual Hofmann rearrangement. Evidence for the proposed mechanism is presented based on ESI-MS/MS and high resolution mass spectrometry studies of cholamine derivatives of PGE1, PGE2, PGD2, PGI2, and C-17 methyl deuterium-labeled limaprost. Graphical Abstract.

Collision-induced dissociation of [UVI O2 (ClO4 )]+ revisited: Production of [UVI O2 (Cl)]+ and subsequent hydrolysis to create [UVI O2 (OH)

In a previous study [Rapid Commun Mass Spectrom. 2004;18:3028-3034], collision-induced dissociation (CID) of [UVI O2 (ClO4 )]+ appeared to be influenced by the high levels of background H2 O in a quadrupole ion trap. The CID of the same species was re-examined here with the goal of determining whether additional, previously obscured dissociation pathways would be revealed under conditions in which the level of background H2 O was lower. Water- and methanol-coordinated [UVI O2 (ClO4 )]+ precursor ions were generated by electrospray ionization. Multiple-stage tandem mass spectrometry (MSn ) for CID and ion-molecule reaction (IMR) studies was performed using a linear ion trap mass spectrometer. Under conditions of low background H2 O, CID of [UVI O2 (ClO4 )]+ generates [UVI O2 (Cl)]+ , presumably by elimination of two O2 molecules. Using low isolation/reaction times, we found that [UVI O2 (Cl)]+ will undergo an IMR with H2 O to generate [UVI O2 (OH)]+ . With lower levels of background H2 O, CID experiments reveal that the intrinsic dissociation pathway for [UVI O2 (ClO4 )]+ leads to [UVI O2 (Cl)]+ , apparently by loss of two O2 molecules. We propose that the results reported in the earlier CID study reflected a two-step process: initial formation of [UVI O2 (Cl)]+ by CID, followed by a very rapid hydrolysis reaction to leave [UVI O2 (OH)]+ .

Insight into copper-catalyzed decarboxylative thiolation of carboxylic acids in the gas phase

Organocopper complexes bearing bidentate nitrogen ligands were synthesized in the gas phase by electrospray ionization mass spectrometry. Gas-phase decarboylative thiolation reaction was carried out in the ion-trap analyzer by collision-induced dissociation and ion-molecule reaction. The carboxylic acids were finally converted to thioethers as a neutral loss via collision-induced dissociation. During this process, copper acetate acted as a catalyst, and the valence state change of copper was observed. Meanwhile, the mechanism of decarboxylative thiolation was examined. This reaction was also suitable for different carboxylic acids and bidentate nitrogen ligands in the gas phase.

Differentiation of AB-FUBINACA and its five positional isomers using liquid chromatography\u2013electrospray ionization-linear ion trap mass spectrometry and triple quadrupole mass spectrometry

PurposePositional isomer differentiation is crucial for forensic analysis. The aim of this study was to differentiate AB-FUBINACA positional isomers using liquid chromatography (LC)–electrospray ionization (ESI)-linear ion trap mass spectrometry (LIT-MS) and LC–ESI-triple quadrupole mass spectrometry (QqQ-MS).MethodsAB-FUBINACA, its two fluorine positional isomers on the phenyl ring, and three methyl positional isomers in the carboxamide side chain were analyzed by LC–ESI-LIT-MS and LC–ESI-QqQ-MS.ResultsFour of the positional isomers, excluding AB-FUBINACA and its 3-fluorobenzyl isomer, were chromatographically separated on an ODS column in isocratic mode. ESI-LIT-MS could discriminate only three isomers, i.e., the 2-fluorobenzyl isomer, the N-(1-amino-2-methyl-1-oxobutan-2-yl) isomer, and the N-(1-amino-1-oxobutan-2-yl)-N-methyl isomer, based on their characteristic product ions observed at the MS3 stage in negative mode. ESI-QqQ-MS differentiated all six isomers in terms of the relative abundances of the product ions that contained the isomeric moieties involved in collision-induced dissociation reactions. The six isomers were more clearly and significantly differentiated upon comparison of the logarithmic values of the product ion abundance ratios as a function of collision energy.ConclusionsThe present LC–MS methodologies were useful for the differentiation of a series of AB-FUBINACA positional isomers.